level faeo - custom sounds...stage a6004 and a9004 • the stage a6004 and a9004 feature channel1...
TRANSCRIPT
JBL Stage A6002/A6004/A9004/A3001 DC Owner•s Manual
JBL Stage A6002/A6004/A9004/A3001 Mode o•emploi
JBL Stage A6002/A6004/A9004/A3001 Manual de Propietario
JBL Stage A6002/A6004/A9004/A3001 Manual do Proprietario
JBL Stage A6002/A6004/A9004/A3001 Manuale Utente
JBL Stage A60021 A6004/ A9004/ A3001 Bedienungsanleitung
JBL Stage A6002/A6004/A9004/A3001 pyKOBOACTBO nonb30BaTen.A
JBL Stage A6002/A6004/A9004/A3001 Bruksanvisning
JBL Stage A6002/A6004/A9004/A3001 Kayttoohjeet
JBL Stage A6002/ A6004/ A9004/ A3001 lnstrukcja Obslugi
JBL Stage A6002/A6004/A9004/A3001 Handleiding
JBL Stage A6002/ A6004/ A9004/ A3001 Betjeningsvejledning
JBL Stage A6002/A6004/A9004/A30011!itilaJJI
JBL Stage A6002/A6004/A9004/A3001 At§~ ~~A1
JBL Stage A6002/A6004/A9004/A3001 mP~M
JBL Stage A6002/A6004/A9004/A3001 tl~i~f!IJ
JBL Stage A6002/A6004/A9004/A3001 Panduan Pengguna
JBL Stage A6002/A6004/A9004/A3001 Kullamm K1lavuzu
m..
-a.. a..
-~
~
~
-~
e-. ~
-~
~
~
---
THANK YOU FOR YOUR PURCHASE ... Your JBL product has been designed to provide you with the performance and ease of operation you would expect from JBL.
• Please take time to read your owner's manual in its entirety before operating or installing your amplifier. • Keep the owner's manual for your amplifier in your glove compartment along wnh the owner's manual for your car. • Put your amplifier sales receipt with other important documents in order to expedne warranty service if needed.
ABOUT THE MANUAL This manual describes general installation guidelines and operation instructions. However, please note that proper installation of mobile audio and video components requires qualified experience with mechanical and electrical procedures. If you do not have the knowledge and tools to successfully perform this 1nstallat1on, we strongly recommend consu~ing an authorized JBL dealer about your installation options. Keep all instructions and sales receipts for reference. Consider this manual as an indispensable feature of your amplifier.
CHAPTER 1: PICTORIAL INDEX OF INPUT CONNECTIONS
Stage Amplifier left side panel
StageA6002
Stage A6004 and A9004
StageA3001
1. Power/protect indicator 2. Power ioput connectors 3. Fuse(s) 4. Speaker output connectors 5. High-level input(s) 6. Line-level inputs (RCA)
CHAPTER 2: INSTALLATION AND WIRING
What's in the box: 1xamplifier
4x mounting screws x4
Spare fuse (x1 for A6002, x2 for A3001, A6004 and A9004)
Stage Amplifier right side panel
StageA6002
Stage A6004 and A9004
LEVEL FAEO
L~~~~~ »Jj II.U .. 1a.I4CKZ100MZ32Hll20MZO. ltd
Stage A3001
7. Gain (input sensniv1ty) 8. Bass EQ control(s) 9. Crossover frequency control(s) 10. Crossover Mer selector(s) 11 . Subwoofer phase selector
High-level input adapter (x1 forA6002 and A3001, x2 for A6004 and A9004) Mounting hardware Quick-start guide
Precautions:
IMPORTANT: Disconnect the vehicle's negative(-) battery terminal before beginning the installation.
• />Jways wear protective eyewear when using tools. • Choose a safe mounting location, away from moisture. Check
clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines, or wiring harnesses and that wire routing will not interfere with the safe vehicle operation. Use caution when drilling or cutting in the mounting area.
• When making electrical connections, make sure they are secure and properly insulated.
• If you must replace any of the amplifier's fuses, use the same type of fuse and current rating as the original.
• To keep the amplifier cool, choose a location that provides enough a1r circulation. such as under a seat or in the trunk.
• Do not mount the amplifier with the heat sink facing downward, as th1s interferes with cooling.
• Mount the amplifier so that it will not be damaged by the feet of backseat passengers or shifting cargo in the trunk, and so that it remains dry.
• Using the amplifier as a template, mark the locations of the holes on the mounting surface.
• Drill p1lot holes 1n the mounting surface. • Attach the amplifier to the mounting surface with four appropriate
mounting screws (not included). Recommended: #8 Phillips-head sheet metal screws.
~TAC.E
NOTE: You may find it more convenient to make all of the connections to the amplifier before you permanently mount it.
• Power/protect indicator: The light will illuminate in blue when the amp is receiving power and playing. The indicator will illuminate in red if the amp enters Protect mode in the event of conditions such as over/under voltage. short circuit, amplifier output circuit failure, or excessive heat.
• Power Input Connectors: • Power: Run power wire from the
+12V input to the posrtive terminal of the vehicle's battery. Insert bare wire into the terminal on the amplifier, then tighten the setscrew with a Phillips screwdriver.
• Install an appropriate fuse holder and fuse (20A minimum for Stage A6002 and 30A minimum for Stage A6004 and A3001, and 40A minimum for A9004) within 18" (457mm) of the battery. Make sure the wire is not damaged or pinched during installation. Install protective grommets when routing wires through the bulkhead or other sheet metal. Use larger-gauge wiring for longer runs. o Stage A6002 minimum wire size: ;, 1 0 gauge o Stage A6004, A9004, A3001 minimum wire size: ;,8 gauge
+ 12 volt Remote Groond
t t t To in-dash receiver 0 0
ggg g (===:Jgg ~•o c cccccc c o ---
o T Fuse 0 18" (46cm)
Power wire
r r'?----';:>-.,_1_
Vehicle battery
Vehicle chassis Ground wire
• Ground: Run a wire (the same gauge as the power wire) from the GND input to a factory bolt in the vehicle's chassis (see illustration below). NOTE: Remove any paint from the chassis for best contact. Use a star washer below the ring connector for a secure connection.
Factory Bolt
Note: Remove any pamt below ring connector
Ring Coonector
Star Washer
Ground Wire
\
• Remote: Connect a 20-gauge wire from the "Remote Out" lead of the source unit to the REM input. This lead turns the amplifier on when using low-level input s~gnals. If your stereo has no "Remote Out" lead, connect the amplifier's REM input to switched accessory power.
• Fuses: • Replace only with fuses of the same amperage:
o Stage A6002: 20A o Stage A6004 and A3001 : 15A x 2 o Stage A9004: 20A x 2
• Speaker Output Connectors: Connect the speakers to these terminals, observ1ng proper polarity (connect each speaker's positive(+) lead to the appropriate positive(+) terminal, and negative(-) lead to the appropriate negative(-) terminal.
Stage A6002 • The Stage A6002 features L+, L-, R+, and R- terminals. • 2-channel operation: Connect the left speaker to the L+ and L- terminals,
and the right speaker to the R+ and R- terminals.
Right speaker
o Bridged operation: Connect the positive wire from the single speaker or subwoofer to the R+ terminal, and the negative wire from the speaker or subwoofer to the L- terminal.
Stage A6004 and A9004 • The Stage A6004 and A9004 feature Channel1 +/-, Channel2 +1-,
Channel3 +1-, and Channel4 +1- terminals. • 4-channel operation: Connect the front left speaker to the Channel 1 +
and - terminals, and the front right speaker to the Channel 2 + and -terminals. Connect the rear left speaker to the Channel 3 + and - terminals, and the rear right speaker to the Chanel 4 + and • terminals.
• 3-channel operation: Connect the stereo speakers to the Channel 1 and Channel 2 terminals, as described above. Connect the single speaker's + lead to the Channel 3 +terminal, and the - lead to the Channel4- terminal.
• 2-channel (bridged} operation: Connect one speaker's + lead to the Channel 1 + terminal, and the - lead to the Channel 2 - terminal. Connect the other speaker's + lead to the Channel3 + terminal, and the - lead to the Channel 4 - terminal.
@~.~"=' ifii @=
StageA3001 • The Stage A3001 features a positive (+)and negative (-)terminals.
o To power a single subwoofer, connect the subwoofer's positive(+) wire to the positive(+) terminal, and the subwoofer's negative(·) wire to the negative(-) terminal.
@ ~WER ~ c:::=::>
~~.Dl@ @ c:::=::> c:::=::> c:::=::>
o To power two subwoofers in parallel, connect one sub's positive(+) and negative(-) leads to the positive and negative terminals of the other sub, then connect that subwoofer's positive (+)wire to the positive (+)terminal, and the subwoofer's negative(-) wire to the negative(-) terminal.
(§) ~~,.~ ~
cO~ ..HI@ @==
NOTE: Minimum speaker impedance for stereo full-range and subwoofer operation is 2 ohms. Minimum speaker impedance for bridged operation is 4 ohms.
• Line-level inputs and outputs (RCA): If your source unit offers preamp outputs, connect to the L and R (A6002 and A3001), or CH1, CH2, CH3, and CH4 (A6004 and A9004) inputs using RCA patch cables.
• High-level audio input: If your car audio system's head unit does not have line-level outputs: Connect the white, white/black, gray, and gray/black wires of the included high-level input harness(es) to the front and/or rear speaker output wires of your car audio system's head unit (splice crimps not included), and the black wire to vehicle chassis ground. Then plug the high-level hamess into the Stage amplifier's high-level input.
Important Some factory-installed audio system amplifiers include electronic fi~ers that limit the amount of bass sent to the system's smaller speakers. This fi~ering will adversely affect the Stage amp's performance. To get the most bass possible from your Stage amp, splice the high-level harness into the factory system speaker outputs that are connected to the system's largest speakers (the ones designed to reproduce the most bass).
• Input sensitivity (GAIN): Input level controls. Use these to match the amp's input sensitMty to the output level of your source unit. See Setting the input levels in Chapter 3 for a recommended adjustment procedure.
• Crossover filter selectors (X-OVER): Let you choose the crossover fi~ers for your system (the Stage A3001 fi~er is low-pass only). • LPF: Low pass. Choose this setting if you're connecting a subwoofer(s), or
want to provide a low-pass Mer for separate mid-bass speakers. • FULL: Full range. Choose this setting if you're connecting full-range
speakers, and not using a subwoofer in your system. • HPF: High pass. Choose this setting to prevent low bass from reaching
midrange or full-range speakers when you're using a subwoofer in your system. (See setting the crossovers in Chapter 3.)
• Crossover-filter frequency controls (FREQ): Tum the dials to the left to lower the crossover point, and to the right to raise the crossover point. Crossover point settings vary by listener preference.
CHAPTER 3: OPERATIONS
Setting the input levels: To match your amplifier's input sensitMty (gain) to your source unit's output level, we recommend the following procedure: A. Tum both input level controls counterclockwise to MIN {minimum). B. Play a dynamic music track through your source unit. Tum the source unit's
volume control to the 3/4 position. C. Tum the front input level control dial clockwise towards MAX until you hear
distortion in the music (It's no longer clear). D. Slowly tum the front level input control dial counterclockwise until the music
sounds clear again. E. Your front input level is now correctly set. Repeat this process with the rear
channels.
Setting the crossover
Properly setting crossover filter selectors optimizes frequency distribution for efficient speaker operation and best sound.
Step 1: Use the slider controls to select low-pass {LPF), FULL, or high-pass {HPF).
• LPF: Low pass. Choose this setting if you are connecting a subwoofer{s) or want to provide a low-pass filter for separate mid-bass speakers.
FULL: Full range. Choose this setting if you are connecting full-range speakers and are not using a subwoofer in your system.
• HPF: High pass. Choose this setting to prevent low bass from reaching midrange or full-range speakers when you are using a subwoofer in your system.
Step 2: Use crossover-filter frequency controls to adjust crossover point settings for coaxial speakers and subwoofers to suit listener preference. Tum the dials to the left to lower the crossover point and to the right to raise the crossover point. Exact crossover settings for coaxial speakers and subwoofers finally depend on your listening preferences. NOTE: crossover point does not apply in FULL mode.
Selecting the subwoofer phase With the Stage A3001, you can choose a subwoofer phase output of o• or 180°. To check your sub's phase, play music with lots of bass and listen as another person slowly turns the dial back and forth between 0 and 180 degrees. The correct setting is the one that gives you more bass. If you don't detect any real difference, leave the dial in the 0 setting.
CHAPTER 5: SPECIFICATIONS
RMSpower RMSpower RMSbridged
o· 1arf
Total
Bass EQ level and frequency: You can increase the bass output of your system with the Bass EQ feature up to + 12d8. Tum the LEVEL dials to the right to increase the bass output.
The Stage 3001 A also lets you choose the center frequency of the bass boost - the frequency that receives the most boost effect. Turn the FREQ dial to the right to adjust the center frequency. The frequency you choose depends on your listening preferences.
CHAPTER 4: TROUBLESHOOTING
PROBLEM: No audio and POWER INDICATOR is off.
LEVEL
OdB 12dB
FREQ
40HZ 100HZ
CAUSE and SOLUTION: No voltage at BATI+ and/or REM terminals, or bad or no ground connection. Check voltages at amplifier terminals with VOM.
PROBLEM: No audio and PROTECT INDICATOR flashes every 4 seconds. CAUSE and SOLUTION: DC voltage on amplifier output. Amplifier may need service; see enclosed warranty card for service information.
PROBLEM: No audio and PROTECT INDICATOR is on. CAUSE and SOLUTION: Amplifier is overheated. Make sure amplifier cooling is not blocked at mounting location. Verify that speaker-system impedance is within specified limits. Or, there may be vo~age greater than 16V {or less than 8.5V) on BATI+ connection. Check vehicle charging system.
PROBLEM: No audio and PROTECT and POWER INDICATORS flash. CAUSE and SOLUTION: Vo~age less than gv on BATI +connection. Check vehicle charging system.
PROBLEM: Distorted audio. CAUSE and SOLUTION: Gain is not set properly. Check INPUT LEVEL setting. Check speaker wires for shorts or grounds. Amplifier or source unit may be defective.
PROBLEM: Distorted audio and PROTECT INDICATOR flashes. CAUSE and SOLUTION: Short circuit in speaker or wire. Remove speaker leads one at a time to locate shorted speaker or wire, and repair.
PROBLEM: Music lacks dynamics or 'punch.' CAUSE and SOLUTION: Speakers are not connected properly. Check speaker connections for proper polarity.
PROBLEM: Amplifier fuse keeps blowing. CAUSE and PROBLEM: The wiring is connected incorrectly or there is a short circuit. Review installation precautions and procedures in manual. Check wiring connections.
PROBLEM: Engine noise-whining or clicking-in system when the engine is on. CAUSE and PROBLEM: Amplifier is picking up alternator noise. Turn down gain. Move audio cables away from power wires. Install an alternator noise filter on power line between battery and alternator. Check ground connections on the amplifier since a loose or improper ground is one of the main causes for extraneous noise in your audio system.
Frequency Maximum high High input Maximum Model @4ohms @2ohms power@ 4 ohms peak power input signal maximum line input response
level sensitivity signal level
StageA6002 60W ?OW 140W 280W 20Hz - 20kHz @ -1 dB 12V 0.5V 5V
StageA6004 60W ?OW 140W 560W 20Hz -20kHz @ -1 dB 12V 0.5V 5V
StageA9004 oow 110W 220W 880W 20Hz- 20kHz @ -1 dB 12V 0.5V 5V
StageA3001 N/A 300W N/A 600W 1OHz- 320Hz@ -3 dB 12V 0.5V 5V
Line input Line-in THO+ Nat Fuse Operating Quiescent Model signal maximum signal-to-noise ratio rated power Dimensions {H x W x D) Weight
sensitivity (reference to 1 watt) (20Hz - 20kHz) size voltage current draw
Stage A6002 0.2V
StageA6004 0.2V
StageA9004 0.2V
Stage A3001 0.2V
~ HARMAN ~
>75dB
>75dB
>75dB
>75dB
HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
<1% 20A 95 x 230 x 190 (mm) 1.16kg 9-16V <1.0A
<1% 2 x 15A 95 x 260 x 190 (mm) 1.381kg 9-16V <1.2A
<1% 2 X 20A 95 x 325 x 190 (mm) 1.806kg 9-16V <1.5A
<1% 2 X 15A 95 x 313 x 190 (mm) 1.609kg 9-16V <1.5A
© 2018 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademar\k of HARMAN lntemationallndustries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
T oprosaR MapKa
Ha3Ha4eHIIIe rosapa
VbrOTOBI/ITenb
fapaHTIII~Hbl~ nepiiiOA
CrpaHa npolllcxo>t<AeHIIIR
lt1Mnoprep B Pocc11110
fapaHTIII~Hbl~ nepiiiOA
V1H<f>OpMa~IIIR 0 cepBIIICHbiX ~eHTpaX
CpoK cny>K6bl
Tosap cepT111<f>IIILIIt1POBaH
JBL
ABTOM061t1flbHbl~ yclt1fllt1Tenb
XapMaH V1HTepHewHn V1HAaCTp1t13 V1HKopnope~reA, CWA, 06901 KoHHeKTit1Kyr, r.CnM<f>opA, AmaHTit1K CTplt1T 400, o<f>lt1c 1 500
1 rOA
K111Ta~
000 "XAPMAH PYC Clt1A~3c", Pocclt1R, 127018, r.MocKBa, yn. ,lJ,Bit1H~es, A.12, K 1
1 rOA
www.harman.com/ru Ten. +7-800-700-0467
3 roAa
~R[ ,lJ,aTa npolt13Bo,acrsa ,lJ,ara lt13roTosneHit1R ycrpo~crsa onpeAenReTCR no ABYM 6yKBeHHbiM o6o3Ha4eHit1RM 1!13 BTopo~ rpynnbl Clt1MBOnOB ceplllli'IHOrO HOMepa lt13AefliiiR, cneAYIOL!.\IIIX nocne pa3Aenlt1TeflbHOrO 3HaKa «-». KOAit1pOBKa COOTBeTCTByeT nopRAKY 6yKB naTit1HCKOro an<f>aBit1Ta, Ha41t1HaR c RHBapR 201 O,rOAa: 000000-MYOOOOOOO, rAe «M»- MeCR~ np01t13BOACTBa (A- RHBapb, B- <f>espanb, (- MapT 1t1 T ,A.) 1t1 «Y»- roA npolt13BOACTBa. lA- 2010, B- 2011, C- 2012 1t1 T ,A.).
TR04838_D
There’s Nothing Better Than Riding With JBLStage Amplifiers
Features Value Engineered
Compact footprint
Full On-Board Protection
Reliability
Input Level Control
Switchable bass EQ
Cool industrial design
Crossover mode switch
Crossover control gives user
additional fine tuning
Our Point of View
Power you will feel at your core.JBL Stage Amps are available in a variety of configurations, delivering the right power and
number of channels for full-range and subwoofer applications. For more than four decades,
JBL has made the audio experience a lot more satisfying for the car audio enthusiast. With
a broad array of loudspeakers, amplifiers and subwoofers available, you can drive with ease
and exhilaration. These compact amps are equipped with all the important inputs and user
controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to
suit the characteristics of different vehicles. The Stage Amps are easily installed and amazingly
reliable – and once they turn on, they’ll make a transducer sit up and sing.
JBL Stage A6002 JBL Stage A6004 JBL Stage A9004 JBL Stage A3001
JBL Stage Amplifier A9004
JBL Stage Amplifier A6004
JBL Stage Amplifier A6002
There’s Nothing Better Than Riding With JBLStage Amplifiers
Features and Benefits
Value EngineeredStage amplifier provides true JBL performance at an affordable price while now lacking the features needed to properly tune and optimize performance.
Compact footprintWith it becoming more and more difficult to find spacious locations for amplifier mounting, Stage has been developed in a small compact form factor
to allow more location versatility.
Full On-Board ProtectionStage amplifier has on-board circuitry to protect them from shorts, temperature, overvoltage and undervoltage. An LED indicator is included on all
four models to let you know when one of these conditions exists.
Reliability JBL is one of the greatest audio brands in the world. This is not a coincidence given the arduous testing and quality control. We take our craft seriously
and want every consumer to have a world-class experience that lasts and lasts.
Input Level ControlWhen Low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 5.0Vrms. When High-level inputs are used,
this control adjusts the input sensitivity between 0.5Vrms and 15Vrms.
Switchable bass EQThis provides an available bass boost at 45Hz of 6dB or 12dB, serving as a great tool to optimize subwoofer and loudspeaker performance based
on location and enclosure type.
Cool industrial designBlack with deep grooves, silver silkscreen, anodized JBL badge top-center with orange end panels and bottom.
Crossover mode switch*LPF crossover controls is switchable between 0dB to 12dB at 45Hz giving user ability to adjust sound to the environment and/or application.
Crossover control gives user additional fine tuning*Adjusts the crossover turnover frequency between 32Hz and 320Hz. (One knob for each stereo pair.)
Our Point of ViewJBL believes that life is defined by what you experience. Music helps people have experiences that are more extraordinary, by fully immersing them
in each moment. To help people have rich experiences, JBL creates full-on sound that draws people in and heightens the feeling. JBL is dedicated
to delivering sound that elevates life.
*Not applicable for JBL Stage A3001
JBL Stage Amplifier A3001
HARMAN International Industries, Incorporated8500 Balboa Boulevard, Northridge, CA 91329 USAwww.jbl.com
©2018 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
There’s Nothing Better Than Riding With JBLStage Amplifiers
What’s in the Box Amplifier
Spare Fuse (x2 for 1-channel and 4-channel model)
Quick start guide
High-level input cable (x2 for 4-channel model)
2x two-color JBL Brand Stickers
Mounting hardware
Mounting screws
Technical Specifications: Stage A6002Operating voltage 9 – 16V
RMS power @ 4 ohms 60W
RMS power @ 2 ohms 70W
RMS bridged power @ 4 ohms 140W
Total peak power 280W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.0A
Fuse size 20A
Dimensions (H x W x L) 50 x 145 x 156.6mm
Weight 1.16kg
Stage A6004Operating voltage 9 – 16V
RMS power @ 4 ohms 60W
RMS power @ 2 ohms 70W
RMS bridged power @ 4 ohms 140W
Total peak power 560W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.2A
Fuse size 2 x 15A
Dimensions (H x W x L) 50 x 145 x 193.6mm
Weight 1.381kg
Stage A9004Operating voltage 9 – 16V
RMS power @ 4 ohms 90W
RMS power @ 2 ohms 110W
RMS bridged power @ 4 ohms 220W
Total peak power 880W
Frequency response 20Hz – 20kHz @ -1dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.5A
Fuse size 2 x 20A
Dimensions (H x W x L) 50 x 145 x 268.6mm
Weight 1.806kg
Stage A3001Operating voltage 9 – 16V
RMS power @ 4 ohms N/A
RMS power @ 2 ohms 300W
RMS bridged power @ 4 ohms N/A
Total peak power 600W
Frequency response 10Hz – 320kHz @ -3dB
THD + N at rated power (20Hz – 20kHz) <1%
Line-in signal-to-noise ratio (reference to 1 watt) >75dB
Maximum high input signal level 12V
High input maximum sensitivity 0.5V
Maximum line input signal level 5V
Line input maximum sensitivity 0.2V
Quiescent current draw <1.5A
Fuse size 2 x 15A
Dimensions (H x W x L) 50 x 145 x 241.6mm
Weight 1.609kg