API 510 EXAMINATION OVERVIEW

The API Exams are given the first Wednesday of June and December.

The Exam is given in two halves. The morning is the Open Book portion.

The afternoon portion is Closed Book.

4 hours are allotted to each half.

The Open Book portion you are allowed to have all the Code books and the API Recommended Practices to use as needed.

These books can be highlighted, tabbed and may have hand written notes in the margins of the pages.

In the Closed Book portion you are not allowed to use the Code books or the API Recommended Practices.

All questions are multiple choice, there are a total of 150 questions each worth 2/3 point.

The Open Book half will have from 45 to 55 questions.

The balance of the questions will be on the second half Closed Book portion in the afternoon.

The examination is scored using a curve. The number of correct questions to pass varies from exam to exam.

This is based on the difficulty level of one exam to another. Each question when written is assigned a level of difficulty from 1 to 4, 4 being the hardest.

If a given exam has a high number of harder questions, it may only require 98 correct to pass, likewise easier exams may require 115 correct.

Code Books and Recommended Practices Required for the Exam

The following is a list of the required Codes and Practices and the Editions of each.

API Standard 510, Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration, 8th Edition,June 1997, Addenda 1, 2, 3 and 4 (August 2003). Global Engineering Product Code API CERT 510 API Recommended Practice 571, Damage mechanisms Affecting fixed equipment in the refining industry, 1st Edition,December 2003ATTENTION: Only the following mechanisms to be included:Par. 4.2.3 Temper Embrittlement4.2.7 Brittle Fracture4.2.9 Thermal Fatigue4.2.14 Erosion/Erosion-Corrosion4.2.16 Mechanical Failure4.3.2 Atmospheric Corrosion4.3.3 Corrosion Under Insulation (CUI)4.3.4 Cooling Water Corrosion4.3.5 Boiler Water Condensate Corrosion4.4.2 Sulfidation4.5.1 Chloride Stress Corrosion Cracking (Cl-SCC)4.5.2 Corrosion Fatigue4.5.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)5.1.2.3 Wet H2S Damage (Blistering/HIC/SOHIC/SCC)5.1.3.1 High Temperature Hydrogen Attack (HTHA) API Recommended Practice 572, Inspection of Pressure Vessels, 2nd Edition, February 2001. API Recommended Practice 576, Inspection of Pressure-Relieving Devices, 2nd Edition, December 2000. API Recommended Practice 577 Welding Inspection and Metallurgy, First edition, October 2004. American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, 2001 edition with 2002 and2003 addenda.i. Section V, Nondestructive Examination, Articles 1, 2, 6, 7 and 23 (section SE-797)ii. Section VIII, Rules for Construction of Pressure Vessels, Division 1, UG, UW, UCS, UHT, Appendices 1-4, 6, 8and 12iii. Section IX, Welding and Brazing Qualifications, Welding only

ASME CODES OVERVIEW

Section VIII Div.1 Unfired Pressure Vessels.

Section VIII is divided into 3 Subsections.

Subsection AGeneral Rules which apply to all vessels

Subsection B Methods of Fabrication Specific Rules based on method (s) used

Subsection CSpecific Rules Based on Material (s)

On the Exam you are responsible for:

Subsection A

Only Part of the UG rules that apply to all vessels no matter how they are made or what they are made of.

Subsection B Only Part of the UW rules for vessel fabricated by welding.

Subsection COnly Part of the UCS rules for vessel made of Carbon or Low Alloys.

About the courseThe course will start with Section VIII Subsection B Methods of Fabrication Part UW, Welding.Next we will cover Part UG General Rules and calculations.Then we will cover the material specific rules for Carbon and Low Alloy Steels Part UCS.Upon completion of the Section VIII coverage we will commence Section IX Welding.After Section IX we will be covering Section V NDE.Then in order API 510, RP 572, RP 576 and, Chapter 2.

About the courseThere will be quizzes throughout the course.There will be homework reading assignments.There will be exercises to complete between classes.There will be a final exam.You will receive 3 Practice Exams each with 150 questions and the solutions sheets for self study.You will be very tired of Codes and calculations when this course is over.

Other than the books, what do I need?You need highlighters.You need tabs.A red pen or pencil (optional).The KIS principle applies , Keep It Simple. You need a simple calculator it need not have any Math function higher than Square Root.You may want a backup calculator during the exam.

Questions?If not lets get started!