led strip lightsled flexible strip kit design specifications • silicon covered 12v weatherproof...

An exciting range of interior and exterior LED strip lights, ideal for residential and commercial environments, with Smart technology.

LED STRIP LIGHTS

270 271270

An exciting range of interior and exterior LED strip lights, ideal for residential and commercial environments, with Smart technology.

LED STRIP LIGHTS

270 271271

Bluetooth Lighting control technology can save the installer time when creating multi-switch control lighting circuits by using the innovative SAL PIXIE Multifunction control or the SAL PIXIE Multifunction remote control? Check out the wiring diagrams of the SAL PIXIE Multifunction controls to see how simple it is to save time and money with multifunction switch circuits.Need more information on Bluetooth Technology? Check out the SAL web FAQ’s or speak to your local SAL team member.

DID

YOU KNOW?

?

P274 RANGE INTRODUCTION P278 WHITE FLP12V2M/5M/S P280 COLOUR IP44 FL1206/S

P281 RGB FLP12V5MRGB P282 WHITE FL2406/R05 P284 WHITE FL2406/SS10 P285 WHITE FL2412/SS10 P286 WHITE FLL2406/SS10

P287 WHITE FLL2412/SS10R9 P290 WHITE SMART FLP12V/SBT P291 RGB SMART FLP12V/RGBBT P292 RGB FL2415RGB/S P293 WHITE FLH2420

P294 QUICK CONNECT KIT P296 NEON SIDE - FLN2407 P297 NEON TOP - FLN2410 P298 NEON BEND - RGB FLN2412 P300 CHANNEL SLT1000

P301 SLT3000 CHANNEL SERIES P302 CHANNEL SLT3040, SLT3050 P303 CHANNEL SLT4050, SLT4060 P304 CHANNEL SLT5000, SLT6010 P305 CHANNEL SLT6000, SLT6050

P306 CONTROL LT8913 DIM P308 CONTROL LT8913 RGB P310 REPEATER LT8914 DIM/RP P312 REPEATER LT8914 RGB/RP P314 CONTROL LT8915 DIM

P316 CONTROL LT8915 RGB P318 CONTROL LT8915DIM/BT P320 CONTROL LT8915RGB/BT

For Interior products, the designated IP rating is “from below the ceiling” unless otherwise specified.

P277 WHITE IP67 FL1209/SRP276 WHITE IP44 FL1209/S

272 273272

P274 RANGE INTRODUCTION P278 WHITE FLP12V2M/5M/S P280 COLOUR IP44 FL1206/S

P281 RGB FLP12V5MRGB P282 WHITE FL2406/R05 P284 WHITE FL2406/SS10 P285 WHITE FL2412/SS10 P286 WHITE FLL2406/SS10

P287 WHITE FLL2412/SS10R9 P290 WHITE SMART FLP12V/SBT P291 RGB SMART FLP12V/RGBBT P292 RGB FL2415RGB/S P293 WHITE FLH2420

P294 QUICK CONNECT KIT P296 NEON SIDE - FLN2407 P297 NEON TOP - FLN2410 P298 NEON BEND - RGB FLN2412 P300 CHANNEL SLT1000

P301 SLT3000 CHANNEL SERIES P302 CHANNEL SLT3040, SLT3050 P303 CHANNEL SLT4050, SLT4060 P304 CHANNEL SLT5000, SLT6010 P305 CHANNEL SLT6000, SLT6050

P306 CONTROL LT8913 DIM P308 CONTROL LT8913 RGB P310 REPEATER LT8914 DIM/RP P312 REPEATER LT8914 RGB/RP P314 CONTROL LT8915 DIM

P316 CONTROL LT8915 RGB P318 CONTROL LT8915DIM/BT P320 CONTROL LT8915RGB/BT

For Interior products, the designated IP rating is “from below the ceiling” unless otherwise specified.

P277 WHITE IP67 FL1209/SRP276 WHITE IP44 FL1209/S

272 273

For terms and conditions of catalogue data use, refer to INDEX For terms and conditions of catalogue data use, refer to INDEX

LED STRIP RANGE

12V Low voltage LED strip

12V Low voltage LED strip kit

12V Low voltage Smart LED strip kit

24V Low voltage LED strip

Type

Type

Type

Type

FL1209/S

FLP12V2M/S

FLP12V2M/SBT

FL2406/R05

WW: Warm White - 3000K, CW- Cool White - 4000K, NDL: Neutral Daylight - 5000K, DL: Daylight - 6000KRGB: Colour Selectable

FL1209/SR

FLP12V5M/S

FLP12V5M/SBT

FL2406/SS10

FL1206/S

FLP12V5M/RGB

FLP12V2M/RGBBT

FL2412/SS10

FLP12V5M/RGBBT

FLH2420

FL2415RGB/S

FLL2406/SS10

FLL2406/SS10R9

Voltage

Voltage

Voltage

Voltage

CCT / Colour

CCT / Colour

CCT / Colour

CCT / Colour

IP Rating

IP Rating

IP Rating

IP Rating

Width (mm)

Width (mm)

Width (mm)

Width (mm)

Power(W/m)

Power(W/m)

Power(W/m)

Power(W/m)

12V DC

12V DC

12V DC

24V DC

12V DC

12V DC

12V DC

24V DC

12V DC

12V DC

12V DC

24V DC

12V DC

24V DC

24V DC

24V DC

24V DC

WW, CW, DL

WW, NDL

WW, NDL

WW, NDL, BLUE

WW, CW, DL

WW, NDL

WW, NDL

WW, CW, DL

Red, Green, Blue

RGB

RGB

WW, CW, DL

RGB

WW, CW, DL

RGB

WW, CW, DL

WW, CW, DL

9

6

6

6

9

6

6

6

6

6

6

12

6

20

15

6

12

IP44

IP44

IP44

IP20

IP67

IP44

IP44

IP65

IP44

IP44

IP44

IP65

IP44

IP20

IP44

IP65

IP65

10

8

8

5

12

8

8

10

10

10

10

10

10

8

10

10

10

Roll Length (m)

Roll Length (m)

Roll Length (m)

Roll Length (m)

5

2

2

30

5

5

5

20

5

5

2

20

5

5

6

20

20

274 275


SINGLE WHITE COLOUR LED STRIP DIMMING WIRINGDIAGRAM TYPE A (TRAILING EDGE)

RF remotecontroller

Max. run as per strip rating



Trailing edge dimmer

240V~

+–

DIMMABLE CONSTANT VOLTAGE

LED DRIVER (TRAILING EDGE)

(n)

(n)

(1)

(1)

L N

+–


LED DRIVER (TRAILING EDGE)

Max. Load refer to Driver


TYPE B (LED CONTROLLER)

N240V~

L

(n)

(1)

CONSTANT VOLTAGE

LED DRIVER+ –

LOW VOLTAGE LED

CONTROLLER+–

+ –

Max. Load refer to Controller

TYPE C (1 – 10V)

(n)

(n)

(1)

(1)

L240V~

N1-10V Dimming Controller eg. SDF30

+–

+–


LED DRIVER (1 – 10V)


LED DRIVER (1 – 10V)



RGB LED STRIP WIRING DIAGRAM

RF remotecontroller


(1)

+RGB

(n)

L240V~

N

CONSTANT VOLTAGE LED DRIVER

24V

RGB LED CONTROLLER

Max. Load refer to Controller

274 275

PLUS


Application

Design Specifications

Dimensions

12V LV WHITE COLOUR LED STRIP IP44 FL1209/S - 9W/M Versatile IP44 LED Single colour white strips

• High efficiency SMD LED chips, with3M self adhesive tape, silicon covered

• Max run per driver 5m, cuttable every25mm, dimmable with compatible drivers

• Heat sink and 12V constant voltagedriver required

• Dimming options: (wiring refer page 275)Type A - Trailing edge dimming,Type B - LED controller LT8913DIM,

LT8915DIM and LT8914DIM/RP, LT8915DIM/BT

Type C - analogue 1-10V• Channel options refer pages 299-305

Technical Specifications

Model No.

FL1209WW/S

FL1209CW/S

FL1209DL/S

Input(V)

Power(W/m) CCT (K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

12V DC

12V DC

12V DC

9

9

9

600

600

600

3000

4000

6000

> 80

> 80

> 80

115º 25 mm

115º 25 mm

115º 25 mm

10 x 3

10 x 3

10 x 3

DimensionsW x H (mm)

LEDQuantity

120p/m

120p/m

120/pm

Versatile IP44 LED white colour strips, ideal for residential features

25 mm

L

W

3M TAPE

Silicon Cover

LED Circuit

H

PerformanceDimmable - OptionalDimmer Type - Refer Dimming Options

276 277


Application


Dimensions

12V LV WHITE COLOUR LED STRIP IP67 FL1209/SR - 9W/MVersatile IP67 LED Single colour white strips



IP67

Model No.

FL1209WW/SR

FL1209CW/SR

FL1209DL/SR

Input(V)

Power(W/m) CCT (K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

12V DC

12V DC

12V DC

9

9

9

500

500

500

3000

4000

6000

> 80

> 80

> 80

115º 25 mm

115º 25 mm

115º 25 mm

12 x 4.5

12 x 4.5

12 x 4.5


LEDQuantity

120p/m

120p/m

120p/m

Exterior feature lighting, residential or commercial spaces

• High efficiency SMD LED chips, with3M self adhesive tape, silicon covered

• Max run per driver 5m, cuttable every25mm, dimmable with compatible drivers

• Heat sink and 12V constant voltagedriver required

• Dimming options: (wiring refer page 275)Type A - Trailing edge dimming,Type B - LED controller LT8913DIM,



25 mm

L

W

3M TAPE

Silicon Cover

LED Circuit

H

276 277

PLUS


Application


Dimensions

FLP12V2M/S - 6W/MSingle white colour 12V low voltage LED strip KIT 2m

• 12V weatherproof LED flexible strip with3M self-adhesive tapes at back

• Pre-wired strip kit includes IP20 LED driver,LED strip & 1.2 m flex & 2 pin plug

• Plug & play ready to use• High efficiency SMD LED chips,

beam angle 115°• Choice of 3000K or 5000K• Stable working performance and even

light output, heatsink recommended• Cuttable every 50 mm at the scissors

symbol, 2m kitsNOTE: when cutting LED strips, it is alwaysimportant to calculate the remaining LEDload to reconfirm its compatibility with theexisting driver, as driver changes may berequired with moderate reduction in loads.

• Channel options refer page 299-305

PerformanceDimmable Driver - No


Model No.

FLP12V2M/WW/S

FLP12V2M/NDL/S

Input(V/Hz)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

240/50

240/50

6

6

300

300

3000

5000

> 80

> 80

115º 50 mm

115º 50 mm

2000 x 8 x 2.5

2000 x 8 x 2.5

DimensionsL x W x H (mm)

LEDQuantity

60p/m

60p/m

An creative solution for residential and commercial interior spaces

3M TAPE

Silicon Cover

LED Circuit

H

50 mm

L

W

278 279


Application


Dimensions

FLP12V5M/S - 6W/MSingle white colour 12V low voltage LED strip KIT 5m

• 12V weatherproof LED flexible strip with 3Mself-adhesive tapes at back

• Pre-wired strip kit includes IP20 LED driver,LED strip & 1.2 m flex & 2 pin plug

• Plug & play ready to use• High efficiency SMD LED chips,

beam angle 115°• Choice of 3000K or 5000K• Stable working performance and even

light output, heatsink recommended• Cuttable every 50 mm at the scissors symbol,

5m kitsNOTE: when cutting LED strips, it is alwaysimportant to calculate the remaining LEDload to reconfirm its compatibility with theexisting driver, as driver changes may berequired with moderate reduction in loads.

• Channel options refer page 299-305

PerformanceDimmable Driver - No


Model No.

FLP12V5M/WW/S

FLP12V5M/NDL/S

Input(V/Hz)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

240/50

240/50

6

6

300

300

3000

5000

> 80

> 80

115º

115º

50 mm

50 mm

5000 x 8 x 2.5

5000 x 8 x 2.5


LEDQuantity

60p/m

60p/m


3M TAPE

Silicon Cover

LED Circuit

H

50 mm

L

W

278 279

PLUS



Application

Dimensions

12V LV SINGLE COLOUR LED STRIP IP44 FL1206/S - 6W/MAn innovative selection of cuttable single colour LED strips

Design Specifications• High efficiency SMD LED chips, with

3M self adhesive tape, silicon covered• Max run per driver 5m, cuttable every

50mm, dimmable with compatible drivers• Heat sink and 12V constant voltage

driver required• Dimming options: (wiring refer page 275)

Type A - Trailing edge dimming,Type B - LED controller LT8913DIM,



Model No.

FL1206RD/S

FL1206GN/S

FL1206BU/S

Input(V)

Power(W/m) Colour Wave length

(nm)BeamAngle

CuttableLength

Lumen(lm/m)

12V DC

12V DC

12V DC

6

6

6

120

220

60

Red

Green

Blue

115º 50 mm

115º 50 mm

115º 50 mm

10 x 3.5

10 x 3.5

10 x 3.5


LEDQuantity

60p/m

60p/m

60p/m

Versatile single colour IP44 LED colour strips


3M TAPE

Silicon Cover

LED Circuit

H

50 mm

L

W

R: 620~630

G: 520~530

B: 460~470

280 281


Dimensions

12V LV RGB LED STRIP KIT IP44 FLP12V5MRGB - 6W/MA creative 12V 5m RGB weatherproof LED flexible strip kit

Design Specifications• Silicon covered 12V weatherproof LED

flexible strip with 3M self adhesive tape• Plug and play ready to use• 5m length, cuttable every 100mm at

designated cut lines. NOTE: when cuttingLED strips, it is always important to calculatethe remaining LED load to reconfirm itscompatibility with the existing driver, as driverchanges may be required with moderatereduction in loads

• Multi-function remote controller included• IP44 weatherproof strip, IP20 flex, plug & driver• Channel options refer pages 299-305

PerformanceDimmable Driver - YesDimmer Type - LED controller


Model No.

FLP12V5M/RGB

Input(V/Hz)

Power(W/m)

BeamAngle

CuttableLength

Wavelength(nm)

240/50 6R: 620~630G: 520~530B: 460~470

115º 100 mm 5000 x 10 x 3.5


LEDQuantity

30p/m

ApplicationDecorative residential features, bar areas, kitchens and stairs

3M TAPE

Silicon Cover

LED Circuit

H

100 mm

L

W

280 281

PLUS



Application


FLEXI FL2406/R05 - 6W/M24V low voltage LED Strip IP20

• High efficiency SMD LED chips with 3Mself-adhesive tapes at back

• Roll length 30 m, run length maximum 5m,cuttable every 100 mm at scissors symbol

• Connection length can be extended bycertain LED drivers, controllers and repeaters

• Dimmable with compatible controller ordimmable constant voltage LED driver

• Dimming options: (wiring refer page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM,

LT8915DIM, LT8915DIM/BT and LT8914DIM/RP

Type C - 1-10V analogue• Heat sink and 24V constant voltage

LED driver required• LED channel options refer pages 299-305

Model No.

FL2406WW/R05

FL2406NDL/R05

FL2406BU/R05

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

24V DC

24V DC

24V DC

6

6

6

460

460

85

3000

5000

Blue

> 80

> 80

—

115º 100 mm

115º 100 mm

115º 100 mm

5 x 1.4

5 x 1.4

5 x 1.4


LEDQuantity

60p/m

60p/m

60p/m



Dimensions

100 mm

L

W

IP20

SAL LED STRIPS,ARE AS FLEXIBLEAND COLOURFULAS YOUR IMAGINATION

Aspire Marsden Park NSW

3M tape

Silicon Coated

LED circuit

H

282 283


SAL LED STRIPS,ARE AS FLEXIBLEAND COLOURFULAS YOUR IMAGINATION

Aspire Marsden Park NSW

283282 283


Application


FLEXI FL2406/SS10 - 6W/MCRI> 80 24V low voltage LED Strip IP65

• High efficiency SMD LED chips with 3Mself-adhesive tapes at back, 6 watt/m

• Roll length 20m, maximum run 5m,cuttable every 100 mm at scissors symbol

• Connection length can be extended bycertain LED drivers, controllers & repeaters

• Dimmable with compatible controller ordimmable constant voltage LED driver;Dimming options: (wiring refer page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM,





Model No.

FL2406WW/SS10

FL2406CW/SS10

FL2406DL/SS10

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

24V DC

24V DC

24V DC

6

6

6

500

500

500

3000

4000

6000

> 80

> 80

> 80

115º 100 mm

115º 100 mm

115º 100 mm

10 x 1.6

10 x 1.6

10 x 1.6


LEDQuantity

60p/m

60p/m

60p/m


Dimensions


3M tape

Silicon coatedLED circuit

H

100 mm

L

W

IP65

284 285


Application


FLEXI FL2412/SS10 - 12W/MCRI>80 24V low voltage LED Strip IP65

• High efficiency SMD LED chips with 3Mself-adhesive tapes at back, 12W/m

• Roll length 20m, maximum run length 5m,cuttable every 100 mm at scissors symbol


• Dimmable with compatible controller ordimmable constant voltage LED driver;Dimming options: (wiring refer page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM ,


Type C - 1-10V analogue • Heat sink and 24V constant voltage



Model No.

FL2412WW/SS10

FL2412CW/SS10

FL2412DL/SS10

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

24V DC

24V DC

24V DC

12

12

12

980

980

980

3000

4000

6000

> 80

> 80

> 80

115º 100 mm

115º 100 mm

115º 100 mm

10 x 1.6

10 x 1.6

10 x 1.6


LEDQuantity

60p/m

60p/m

60p/m


3M tape


H

Dimensions


100 mm

L

W

IP65

284 285

PLUS


Application


FLEXI FLL2406/SS10 - 6W/M20 metre length CRI> 80, 24V low voltage LED Strip IP65

• High efficiency SMD LED chips with 3Mself-adhesive tapes at back, 6 watt/m

• Roll length 20m, maximum run per driver 20m,cuttable every 100 mm at scissors symbol

• Connection length can be extended by certain LED drivers, controllers & repeaters

• Dimmable with compatible controller or dimmable constant voltage LED driver; Dimming options: (refer wiring page 275) Type A - Trailing edge dimmer Type B - LED Controller: LT8913DIM ,



LED driver required• LED channel options refre pages 299-305


Model No.

FLL2406WW/SS10

FLL2406CW/SS10

FLL2406DL/SS10

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

24V DC

24V DC

24V DC

6

6

6

500

500

500

3000

4000

6000

> 80

> 80

> 80

115º 100 mm

115º 100 mm

115º 100 mm

10 x 1.6

10 x 1.6

10 x 1.6


LEDQuantity

60p/m

60p/m

60p/m


Dimensions


100 mm

L

W

IP65

3M tape


H

286 287


Application


FLEXI FLL2412/SS10R9 - 12W/M20 metre length CRI>90, 24V low voltage LED Strip IP65

• High efficiency SMD LED chips with 3Mself-adhesive tapes at back,12W/m, CRI>90

• Roll length 20m, maximum run length perdriver 20m, cuttable every 50 mm atscissors symbol


• Dimmable with compatible controller ordimmable constant voltage LED driver;Dimming options: (refer wiring page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM ,


Type C - 1-10V analogue • Heat sink and 24V constant voltage

LED driver required• LED channel options refre pages 299-305


Model No.

FL2412WW/SS10R9

FL2412CW/SS10R9

FL2412DL/SS10R9

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

24V DC

24V DC

24V DC

12

12

12

980

980

980

3000

4000

6000

> 90

> 90

> 90

115º 50 mm

115º 50 mm

115º 50 mm

10 x 1.6

10 x 1.6

10 x 1.6


LEDQuantity

120p/m

120p/m

120p/m


Dimensions


50 mm

L

W

IP65

3M tape


H

CRI>90

286 287

PLUS

SAL PIXIEAN AFFORDABLE CHOICE FOR HOME LIGHTING AUTOMATION

288 289

SAL PIXIEAN AFFORDABLECHOICE FOR HOME LIGHTING AUTOMATION

288 289



Application


FLEXI SMART FLP12V/SBT, 2M, 5M2m and 5m smart lighting, white strip kits

• Smart LED strip kit• Dimmable via the remote included

or via the SAL PIXIE or PIXIE PLUS app• Dimming memory function, high

performance, stable, even light output• Pre wired for easy installation,

plug-in & ready to use• Cuttable every 50mm, 2m or 5m kits,

lumens shown are lm/m, strip power 6w/m.NOTE: when cutting LED strips, it is alwaysimportant to calculate the remaining LEDload to reconfirm its compatibility with theexisting driver, as driver changes may berequired with moderate reduction in loads.

• NOTE: Heatsink required

Model No.

FLP12V2M/WW/SBT

FLP12V2M/NDL/SBT

FLP12V5M/WW/SBT

FLP12V5M/NDL/SBT

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

12V DC

12V DC

12V DC

12V DC

6

6

6

6

350

350

350

350

3000

5000

3000

5000

> 80

> 80

> 80

> 80

115º 50 mm

115º 50 mm

115º

115º

50 mm

50 mm

2000 x 8 x 2.5

2000 x 8 x 2.5

5000 x 8 x 2.5

5000 x 8 x 2.5


LEDQuantity

60p/m

60p/m

60p/m

60p/m

Home theatre, bar features, decorative task illumination demanding smart controls

Dimensions

3M tape

Silicon coverLED circuit

H

50 mm

L

W

PerformanceDimmable - YesDimmer Type - PIXIE or supplied controller

PLUS

290 291


Application


FLEXI SMART FLP12V/RGBBT, 2M, 5M2m and 5m RGB smart lighting LED strip kits

• Smart LED strip kit colour and brightnesscontrolled via the remote included or viathe SAL PIXIE or PIXIE PLUS

• Four different flashing modes with dimmingmemory function

• High performance, stable, even light output,pre wired for easy installation, plug-in & ready to use and cuttable every 100 mm. NOTE: when cutting LED strips, it is always important to calculate the remaining LED load to reconfirm its compatibility with the existing driver, as driver changes may be required with moderate reduction in loads

• Choice of 2m and 5m packs available,IP44 strip only

• NOTE: heatsink required for warranty andsystem performance


Model No.

FLP12V2M/RGBBT

FLP12V5M/RGBBT

Input(V)

Power(W/m)

BeamAngle

CuttableLength

240

240

5.4

5.4

115º 100 mm

115º 100 mm

2000 x 10 x 3

5000 x 10 x 3

DimensionsL x W x H (mm) LED Quantity

30p/m

30p/m

Home theatre, bar features, decorative task illumination demanding smart controls

3M tape


H

Dimensions

PerformanceDimmable - YesDimmer Type - PIXIE or supplied controller

PLUS

100 mm

L

W

290 291

PLUS


Application


FLEXI FL2415RGB/S - 15W/MRGB 24V low voltage LED Strip IP44

• High efficiency SMD LED chips with 3Mself-adhesive tape

• Roll length and maximum run length perdriver 6 m, cuttable every 100 mm atscissors symbol


• RGB colour changeable with compatiblecontroller LT8913RGB, LT8915RGB/BT

• Heat sink and 24V constant voltage LEDdriver required

• Suitable LED driver - refer cataloguesection “drivers”

• LED channel options refer pages 299-305

A creative solution for residential and commercial interior spaces

Dimensions

PerformanceDimmable - YesDimmer Type - Refer Dimming Options


Model No.

FL2415RGB/S

Input(V)

Power(W/m)

BeamAngle

CuttableLength

Wavelength(nm)

24V DC 15R: 620~630G: 520~530B: 460~470

115º 100 mm 10 x 3.5


LEDQuantity

60p/m

L

W

100 mm

3M tape


H

292 293


Application


Dimensions

FLEXI FLH2420 - 20W/M24V low voltage, high ouptput LED Strip IP20

• High colour rendering with high outputgreater than 1500lm/m

• High efficiency SMD LED chips with 3Mself-adhesive tape

• Roll length 5 m, cuttable every 62.5 mmat scissors symbol


• Dimmable with compatible controller ordimmable constant voltage LED driver;Dimming options: (wiring refer page 275)Type A - Trailing edge dimmerType B - LED Controller: LT8913DIM ,

LT8915DIM and LT8914DIM/RPType C - 1-10V analogue

• Heat sink and 24V constant voltageLED driver required

• LED channel options refer pages 299-305


62.5 mm

L

W



Model No.

FLH2420 WW

FLH2420 CW

FLH2420 DL

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

24V DC

24V DC

24V DC

20

20

20

1700

1800

2000

3000

4000

6000

> 80

> 80

> 80

115º 62.5 mm

115º 62.5 mm

115º 62.5 mm

8 x 2

8 x 2

8 x 2


LEDQuantity

96p/m

96p/m

96p/m

IP20

3M tape

Silicon Coated

LED circuit

H

292 293

PLUS


Design Specifications• FLC05CS - Twin 400mm fly lead to connect 5

mm strip (pack of 10), suits FL2406R05• FLC10CS - Twin 400mm fly lead to connect 10

mm strip (pack of 10), suits FL1206, FL1209/S, FL2406/SS10, FL2412/SS10, FLL2406/SS10, FLL2412/SS10R9

• FLC10SS - connector to join 10 mm strip (packof 5), suits FL1206, FL1209/S, FL2406/SS10, FL2412/SS10, FLL2406/SS10, FLL2412/SS10R9

Application

QUICK CONNECT KIT FLC05CS, FLC10CS, FLC10SSLED strip quick connect kit


Dimensions

FLC05CS

FLC10SS

IP20

9.5 mm 7.5 mm

5 mm

2.5

14.5 mm 8 mm

10 mm5 mm

14.5 mm 8 mm

10 mm5 mm

5 mm

10mm

10mm

COLOUR TEMPERATURE,THERE IS A DIFFERENCELighting is more than just brightness or lumens. Make sure youtake the time to select the right colour temperature to createthe best visual appearance; your eyes don’t tell lies!

3000K

2700K

2700K 4000K 6000K

6000K5000K

4000K

FLC10CS

294 295


COLOUR TEMPERATURE,THERE IS A DIFFERENCELighting is more than just brightness or lumens. Make sure youtake the time to select the right colour temperature to createthe best visual appearance; your eyes don’t tell lies!

3000K

2700K

2700K 4000K 6000K

6000K5000K

4000K

295294 295


NEON SIDE - BEND FLN2407 - 7W/MFlexible Neon Bend strip, 24V DC low voltage, IP66

ApplicationA very flexible solution for residential and commercial interior spaces


Model No.

FLN2407WW17

FLN2407CW17

FLN2407DL17

FLN2407YW17

FLN2407RD17

FLN2407GN17

FLN2407BU17

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

24V DC

24V DC

24V DC

24V DC

24V DC

24V DC

24V DC

7

7

7

7

7

7

7

500

520

500

45

45

180

50

3000

4000

6000

> 80

> 80

> 80

115º

115º

115º

115º

115º

115º

115º

50 mm

50 mm

50 mm

50 mm

50 mm

50 mm

50 mm

10000 x 10 x17

10000 x 10 x17

10000 x 10 x17

10000 x 10 x17

10000 x 10 x17

10000 x 10 x17

10000 x 10 x17


LEDQuantity

120p/m

120p/m

120p/m

120p/m

120p/m

120p/m

120p/m

Design Specifications•

•

High efficiency SMD LED chips, luminous efficacy up to 40lm/W, beam distributionRoll length 10m, cuttable every 50mm at scissors symbol, OR cut to length byspecial order

• EPR standard compliant, with smoothcolour uniformity

• SIDE-BEND Blue, Green, Yellow, Red or White in3000K/4000K/6000K colour choices, CRI >80

• Driver ordered separately, power 7.2W/m,maximum run length per driver 10m

PerformanceDimmable Driver - OptionalDimmer Type - Refer driver specification

IP66 ta40

296 297


NEON TOP - BEND FLN2410 - 10W/M


Model No.

FLN2410WW1312T

Input(V)

Power(W/m)

CCT(K) CRI Beam

AngleCuttableLength

Lumen(lm/m)

24V DC 10 600 3000 > 80 115º 50 mm 10000 x 13 x12


LEDQuantity

120p/m

Flexible Neon Bend strip, 24V DC low voltage, IP66


Design Specifications• High efficiency SMD LED chips,

luminous efficacy up to 600lm/m, beamdistribution 115°

• Roll length 10M, cuttable every 50mm atscissors symbol, maximum run length perdriver 10m

• One bin with smooth colour uniformity,SDCM-3

• CCT 3000K, CRI >80• Class III silicon neon strip, driver ordered

separately, power 9.6W/m, 24V DC• Standard KIT includes; 10 x FLN1312MC

and 3 x FLN1312EC, or cut to length byspecial order

• Additional accessories include weatherproofconnectors, contact SAL customer service fororder details


IP66 ta40

296 297

PLUS


NEON BEND - RGB FLN2412 - 12W/MFlexible Neon Bend RGB strip, 24V DC low voltage, IP66

Design Specifications• High efficiency SMD LED chips, 12W/m,

beam distribution 115°• Roll length 5m, cuttable every 83mm at

scissors symbol• Maximum run per driver 5m• (TOP BEND) FLN2412RGB1312T KIT includes:

5 x FLN1312MC and 1 x FLN1312EC• (SIDE BEND) FLN2412RGB1217 KIT includes:

5 x FLN1217MC and 1 x FLN1217EC,or cut to length by special order

• Class III silicon strip, driver ordered separately,power 12W/m, 24V DC



Model No.

FLN2412RGB1312T

FLN2412RGB1217

Input(V)

Power(W/m)

BeamAngle

CuttableLength

Wavelength(nm)

24V DC

24V DC

12

12

R: 620~630G: 520~530B: 460~470

115º

115º

83 mm

83 mm

5000 x 13 x 12

5000 x 12 x 17

DimensionsL x W x H (mm) LED

Top bend

Side bend


IP65IP66 ta40

298 299


SAL LED STRIP CHANNEL RANGESee the following pages for individual product specifications

Model No.

SLT1000

SLT1000/2M

SLT3000

SLT3000/2M

SLT3010

SLT3010/2M

SLT3020

SLT3020/2M

SLT3030

SLT3030/2M

SLT3040

SLT3050

SLT3050/2M

SLT4050

SLT4050/2M

SLT4060

SLT4060/2M

SLT5000

SLT5000/2M

SLT6000

SLT6000/2M

SLT6010

SLT6050

SLT6050/2M

Description Length

SURFACE MOUNTED CHANNEL

SURFACE MOUNTED CHANNEL

SQUARE CHANNEL

SQUARE CHANNEL

CLIP-ON CHANNEL TYPE 1






RECESSED CABINET CHANNEL

SURFACE MOUNTED CABINET CHANNEL

SURFACE MOUNTED CABINET CHANNEL

RECESSED UNIVERSAL CHANNEL

RECESSED UNIVERSAL CHANNEL

RECESSED TRIMLESS

RECESSED TRIMLESS

CORNER CHANNED

CORNER CHANNED

NARROW RECESSED CHANNEL

NARROW RECESSED CHANNEL

HANGING RAIL CHANNEL

TRIMLESS NARROW CHANNEL

TRIMLESS NARROW CHANNEL

1 m

2 m

1 m

2 m

1 m

2 m

1 m

2 m

1 m

2 m

1.2 m

1 m

2 m

1 m

2 m

1 m

2 m

1 m

2 m

1 m

2 m

1.2 m

1 m

2 m

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

10 mm

5 mm

5 mm

5 mm

5 mm

5 mm

Maximum Strip Width

298 299

PLUS


Application


Dimensions

LED STRIP CHANNEL SLT1000LED strip channel, surface mount

• Extruded aluminium body profile• Anodized silver finish• Clear reeded polycarbonate diffuser• PVC clips and end cap included• Standard lengths 1000mm or 2000mm• Product order code SLT1000, (1000mm)

Perfect for residential interior feature lighting

IP20


Model No.

SLT1000

Description

CHANNEL CURVED 20 x 17.5mm

17.5 mm

20 mm

13 mm

300 301


Application


Dimensions

SLT3000

SLT3010

SLT3020

SLT3030

SLT LED STRIP CHANNEL SLT3000/3010/3020/3030

IP20


Model No.

SLT3000

SLT3000/2M

SLT3010

SLT3010SLT3010/2M

SLT3020

SLT3020/2MSLT3020/2M

SLT3030

SLT3030/2M

Description

CHANNEL SQUARE 16 x 16mm 1m

CHANNEL SQUARE 16 x 16mm 2m

CHANNEL CLIP ON 10 x 19mm 1m



CHANNEL CLIP ON UNDERSHELF 1m


CHANNEL CLIP ON UNDERSHELF 2m

Multi installation options, LED strip channel

• Extruded aluminium body• Anodize silver finish• Opal polycarbonate diffuser• Supplied with end caps only• Standard channel length:

1 m or 2 m


16 mm

13 mm16 m

m

18 m

m

10 mm

15 m

m

19 m

m

16.5

mm

16.5

mm

19 mm

16 mm

16.5

mm

31 m

m

13 mm

300 301

PLUS


Application


Dimensions

SLT3040

SLT3050

SLT3040

SLT3050

SLT LED STRIP CHANNEL SLT3040, SLT3050


Model No.

SLT3040 CHANNEL 19 x 79.5mm 1.2m CABINET

SLT3050

SLT3050/2M

CHANNEL SM 39 x 9mm 1m CABINET

CHANNEL SM 39 x 9mm 2m CABINET

Low profile LED strip channel andcabinet channel

• Extruded aluminium body• Anodized silver finish• Opal polycarbonate diffuser• Supplied with PVC surface clips

and end caps (SLT3050)• Standard length channel

- SLT3050 1m or 2m


IP20

Description

75 mm

15 mm

16 m

m

9 mm

16 mm

39 mm

302 303


Dimensions

ApplicationSLT4050

SLT4050

SLT4060

SLT4060


SLT LED STRIP CHANNEL SLT4050, SLT4060Trimless profile LED strip channel

• Extruded aluminium body,trimless profile (SLT4060)

• Anodize silver finish• Opal polycarbonate diffuser• Supplied with end caps only



Model No.

SLT4060

SLT4060/2

CHANNEL TRIMLESS 17.5 x 8.0mm 1m

CHANNEL TRIMLESS 17.5 x 8.0mm 2m

IP20

21 mm

16 mm

17.5 mm

8.5 mm

10 m

m

8 mm13 mm

SLT4050

SLT4050/2

CHANNEL WINGED 21x10.0mm 1m

CHANNEL WINGED 21x10.0mm 2m

Description

302 303

PLUS


Application


SLT LED STRIP CHANNEL SLT5000, SLT6010Profile shaped corner LED strip channel,and LED strip channel

• Extruded aluminium body• Anodize silver finish• Opal polycarbonate diffuser• Supplied with PVC clips and end

caps (SLT5000 ony)


10 mm16 m

m

IP20

SLT5000

SLT5000

SLT6010

SLT6010

Dimensions


Model No.

SLT5000

SLT5000/2

Description

CHANNEL CORNER 16mm 1m

CHANNEL CORNER 16mm 2m

SLT6010 CHANNEL HANGING RAIL 38mm X 24mm 1.2m

24 mm

38 m

m

5.2 mm7.8 mm

304 305


Application


Dimensions

SLT LED STRIP CHANNEL SLT6000, SLT6050Profile shaped LED strip channel,Trimless LED strip channel

• Extruded aluminium body• Anodize silver finish• Opal polycarbonate diffuser• Standard length 1000 or 2000mm


IP209 mm

5.2 mm

12 mm

SLT6000

SLT6000

SLT6050

SLT6050


Model No. Description

SLT6050

SLT6050/2M

SLT6000

SLT6000/2M

CHANNEL NARROW RECESSED 10mm x 12mm 1m

CHANNEL NARROW RECESSED 10mm x 12mm 2m

CHANNEL RECESSED 7.6mm x 12mm 1m

CHANNEL RECESSED 7.6mm x 12mm 2m

10 mm

5.2 mm

12 mm

304 305

PLUS


LED STRIP CONTROL LT8913 DIM

Application


Dimensions

Smart lighting LED - single colour circuit and remote control

• Designed for single colour LED brightness control

• Touch wheel control design for easy brightness control

• Smooth 1 - 100% dimming• Input voltage range: 5-36V DC• Each controller provides one output

channel with a maximum current of 8A• 288W maximum power output at 36V

Home theatre, decorative feature lighting designs which require smart remote control


IP20


LT8913 DIM

Input(V DC)

Power(W)

BodyColourDimmable

5 - 36LED STRIP CIRCUIT & REMOTE CONTROL 288 Yes White 97 x 33 x 18

Dimensions(L x W x H mm)

107

mm

59 mm

33 mm

97mm

18 mm

59 mm9 mm

306 307


LED Strip

LED CircuitController

LED Driver

Power supply5-36V DCConstant voltage

100%1%

50%

Level

Push Switch (optional )

AC110-230V

DIMMER

+

_220-240V AC

Wiring Diagram

(not included)

306 307

PLUS


Application


Dimensions

LED STRIP CONTROL LT8913 RGBSmart lighting LED - RGB colour circuit and remote control

• Designed for RGB LED colour brightness control

• Touch wheel control design for easy control, dimmable with scene memory

• 16 millions colours with low flicker smooth dimming and colour changing

• Input voltage range: 12-24V DC• Each controller provides three output

channels with a maximum current of 4A for each channel

• 288W maximum power output at 24V

Home theatre, decorative feature lighting designs which require smart remote control


DescriptionModel No. Description

LT8913 RGB

Input(V DC)

Power(W)

BodyColourDimmable

12-24RGB LED STRIP CIRCUIT & REMOTE CONTROL 288 Yes White 97 x 33 x 18


107

mm

59 mm

33 mm

97mm

18 mm

59 mm9 mm

IP20

308 309


Wiring Diagram

RGB LED stri p

AC110-230V

RGB/RGBW

220-240V AC+

_

RGB LED Strip

LED Strip


LED Driver

Power supply12-24V DCConstant voltage

308 309

PLUS


POWER REPEATER LT8914 DIM/RP

Application


Single channel low voltage LED power repeater

• Designed for extending single colour LED strip lights

• With the repeater, one single colour control device controls multiple connections of LED strips

• Each repeater provides one output channel• Each channel has a maximum output

current of 8A• Input voltage range: 5-36V DC• 288W maximum power output at 36V

Home theatre, decorative feature lighting designs which require smart control



LT8914 DIM/RP

Input(V DC) Power (W) Body Colour

5 - 36POWER REPEATER 288 White 97 x 33 x 18


Dimensions

33 m

m

97mm

18 mm

IP20

310 311


Wiring Diagram1. Series Connection

2. Parallel Connection

V1

EV1

OU

TPU

T

Uout=5-36VDCIout=8APout=40-288WTemp Range:-30°Ê~+55°Ê

Uin=5-36VDCIin=8.5A

POWER REPEATER

IN

PU

T5-

36V

DC

+ +

INP

UT

PW

M S

IGN

AL

+

EV1

OU

TP

UT

Uout=5-36VDCIout=8APout=40-288WTemp Range:-30°Ê~+55°Ê

Uin=5-36VDCIin=8.5A

POWER REPEATER

IN

PU

T5-

36V

DC

+ +

INP

UT

PW

M S

IGN

AL

+

LT8913 DIM

Single colour LED Strip



Power Supply5-36VDCConstant Voltage

+

_220-240V AC


+

_220-240V AC


+

_220-240V AC

V1

EV1

OU

TP

UT

IN

PU

T5-

36V

DC

+ +

INP

UT

PW

M S

I GN

AL

+

OU

TP

UT

IN

PU

T5-

36V

DC

+ +

INP

UT

PW

M S

IGN

AL

+

EV1

LT8913 DIM





+

_220-240V AC


+

_220-240V AC


+

_220-240V AC

310 311

PLUS


Application


POWER REPEATER LT8914 RGB/RPThree channel low voltage LED power repeater

• Designed for extending RGB LED strip lights• With the repeater, one RGB colour

control device controls multiple connections of LED strips

• Each repeater provides three RGB output channels

• Each channel has a maximum output current of 6A

• Input voltage range: 12-36V DC• 648W maximum power output at 36V



Dimensions

175 mm

160 mm

27 mm

45 m

m


LT8914 RGB/RP

Input(V) Power (W) Body Colour

36V DCPOWER REPEATER 648 White 175 x 45 x 27


IP20

312 313


Wiring Diagram1. Series Connection 2. Parallel Connection

For terms and conditions of catalogue data use, refer to INDEX

Wiring Diagram

1. Series Connection 2. Parallel Connection

AC110-230V

V3


AC110-230V


AC110-230V

EV3

RGB LED strip

RGB LED strip

RGB LED strip

EV3

32

1

+3

21

+12

-36V

DC

OU

TPU

T

-

PW

M S

IGN

AL

INP

UT

INP

UT

32

1

+3

21

+12

-36V

DC

OU

TPU

T

-

PW

M S

IGN

AL

INP

UT

INP

UT


+

_

+

_

+

_

220-240V AC

220-240V AC

220-240V AC

LT8913 RGB


AC110-230V


AC110-230V

EV3

V3

AC110-230V

RGB LED strip

RGB LED stripEV3

32

1

+3

21

+12

-36V

DC

OU

TPU

T

-

PW

M S

IGN

AL

INP

UT

INP

UT

32

1

+3

21

+12

-36V

DC

OU

TPU

T

-

PW

M S

IGN

AL

INP

UT

INP

UT


+

_

+

_

+

_220-240V AC

220-240V AC

220-240V AC

LT8913 RGB

313

PL US

312 313

PLUS


LED STRIP CONTROL LT8915 DIM

Application


Single colour LED controller kit

• Designed for single colour brightness control• Touch wheel control design for easy

brightness control, with scene memory and 30m control distance

• Smooth 0 - 100% dimming• Input voltage range: 12-36V DC• Each controller provides three output






LT8915 DIM

Input(V DC)

Power(W)

BodyColourDimmable

36LED STRIP CIRCUIT & REMOTE CONTROL 648 Yes White 175 x 45 x 27


Dimensions

175 mm

160 mm

27 mm

45 mm

107

mm

59 mm

59 mm9 mm

IP20

314 315


Wiring Diagram

100%1%

50%

Level

DIMMER


Wiring Diagram

L3CH LED Controller

VDC

12 36 VDC6A

72Light Type:RGB,CCT,DIMTemp Range:-30 55

2.4G

12-3

6VD

C

1

2 3

-

RG

BW

W

MATCH

12-36VDCConstant Voltage

AC110-230V

Single color LED strip



220-240V AC+

_

DIMMER




100%1%

50%

Level

315

PL US

314 315

PLUS


Application


LED STRIP CONTROL LT8915 RGBRGB colour LED controller kit

• Designed for RGB LED colour brightness control

• Touch wheel control design for easy brightness control, with scene memory and 30m control distance

• Smooth 0 - 100% dimming• Input voltage range: 12-36V DC• Each controller provides three output





DescriptionModel No. Description

LT8915 RGB

Input(V DC)

Power(W)

BodyColourDimmable

36RGB LED STRIP CIRCUIT & REMOTE CONTROL 648 Yes White 175 x 45 x 27


Dimensions

175 mm

160 mm

27 mm

45 mm

107

mm

59 mm

59 mm9 mm

IP20

316 317


Wiring Diagram

V3 L3CH LED Controller

Uin=12-36VDCIin=18.5A

Uout=3 12 36 VDCIout=3 6APout=3 72 216)WLight Type:RGB,CCT,DIMTemp Range:-30 55

2.4G

MATCH

+RGB


220-240V AC+

_

LED Strip


LED Driver

316 317

PLUS


LED STRIP CONTROL LT8915DIM/BT

Application


Dimensions

Single colour LED strip controller

• Designed for single colour brightness control• Smooth 0 - 100% dimming• Input voltage range: 12-24V DC• 360W maximum power output at 24V• One channel with two sets of terminals for

easy wiring• Supports momentary switch (bell press control)

• Control button for easy commissioning• Optional memory function• Supports both wireless and wired group control

Home theatre, commercial spaces and decorative feature lighting designs which require smart control



LT8915DIM/BT

Input(V DC)

Power(W)

BodyColourDimmable

LED STRIP CONTROLLER Max. 360 Yes White 175 x 45 x 27


175 mm

160 mm

27 mm

45 mm

IP20 ta40

12 - 24

PLUS

318 319


Wiring Diagram


Wiring Diagram

MomentarySwitch

319

PL US

318 319

PLUS


Application


Dimensions

LED STRIP CONTROL LT8915RGB/BTRGB colour LED strip controller

• Designed for RGB colour and brightness control• Smooth 0 - 100% dimming• Input voltage range: 12-24V DC• Each controller provides three output channels

with a maximum current of 6A for each channel• 432W maximum power output at 24V• Supports momentary switch (bell press control)

• Control button for easy commissioning• Four flashing modes• Optional memory function• Supports both wireless and wired group control

Home theatre, commercial spaces and decorative feature lighting designs which require smart control



LT8915RGB/BT

Input(V DC)

Power(W)

BodyColourDimmable

12 - 24RGB LED STRIP CONTROLLER Max. 432 Yes White 175 x 45 x 27


175 mm

160 mm

27 mm

45 mm

IP20 ta40

PLUS

320 321


Wiring Diagram

MomentarySwitch

MomentarySwitch

320 321

PLUS

led strip lightsled flexible strip kit design specifications • silicon covered 12v weatherproof...

Documents