led ringlights · 2019. 11. 21. · specbrights led ringlights 2 spectral characteristics 1...
TRANSCRIPT
-
SpecBright™ LED Ringlights
www.prophotonix.com
Key Features• Extremely bright, compact, and reliable
• Chip-on-board technology
• Superior uniformity
• Seamless integration and mounting
• UV, visible, near-IR and white
Applications• Machine vision
• Fluorescence spectroscopy
• Microscopy
Accessories• Power supplies
• Current mode drivers
• Heat sinks
• Strobe drivers
Extremely bright LED illumination
ProPhotonix SpecBright LED Ringlights are the brightest LED
illuminators in their class. Based on our patented chip-on-board
technology, these modules are manufactured with a high LED
packing density and excellent thermal management.
Compared to illuminators fabricated with individually packaged
LEDs, ProPhotonix SpecBright LED Ringlights offer several times
the brightness, for modules of comparable size. The illuminators
combine up to 100 individually mounted LED chips with a single
high quality aspherically corrected fresnel lens, to deliver a high level
of illumination over a selected field of view with excellent uniformity.
These high performance ringlights are ideal for OEMs, system
integrators and end users who require bright, uniform, long lasting
illumination sources. SpecBright Ring Lights can be operated in
continuous (CW) or pulsed mode. Custom solutions are also available
to meet specific requirements.
-
2SpecBrights LED Ringlights
Spectral Characteristics
1 Irradiance and illuminance of blue, white, UV and IR units, for working distances other than that shown above, may be computed with reference to the Intensity vs Working Distance plot provided for the Red Ringlight. Values computed in this manner are valid within ± 10%2 See Figure 2 for graph of FWHM illumination diameter, as a function of working distance.3 Irradiance and Illuminance are measured at the centre of the illumination field, in continuous wave mode at maximum operating current (current mode)4 Maximum working distance is where the power density has dropped to 10% of the optimal working distance measurement. Minimum working distance is the nearest point where the circular illumination pattern is complete.5 Case temperature should not exceed 45°C. Please consult ProPhotonix for details on lifetime measurements.
Illumination Characteristics1,2,3,4
Electrical Characteristics, Lifetime & Environment5
UV (365) UV (395) Blue (470) Red (630) IR (740) White
Series 1 - Inner diameter of housing : 27.5 mm
Working Distance range (mm)4 35-190 32-122 30-115 30-130 45-165 35-150
Maximum Irradiance (W/m2) 229 197 304 351 150 260
Maximum Illuminance ( kLux) NA NA 19 74 NA 84
FWHM at Point of Max. Irradiance/Illuminance (mm) 52 48 46 46 46 48
FWHM at 100mm Working Distance 98 98 98 98 98 98
Series 2 - Inner diameter of housing: 47.5mm
Working Distance Range (mm)4 41-223 37-142 35-132 35-151 53-193 45-170
Maximum Irradiance (W/m2) 155 134 207 239 102 141
Maximum Illuminance (kLux) N/A N/A 13 51 N/A 45
FWHM at Point of Max. Irradiance/Illuminance (mm) 53 49 46.5 46.5 66 142
FWHM at 100mm Working Distance 118 118 118 118 118 118
Colour UV UV Blue Red IR White
Peak wavelength / Colour Temperature 365±10nm 395 ±10nm 470 ± 10nm 630 ± 10nm 740 ± 10nm 6700k
Typical Spectral width FWHM (nm) 11 11 26 17 24 115
UV (365) UV (395) Blue (470) Red (630) IR (740) White
Voltage mode (code “V”)Operating current (mA) at 24V 200 200 200 200 200 160
Current mode (code “I”)Maximum operating current (mA) 400 400 400 400 400 240
Mean time before failure (MTBF) 60,000 60,000 60,000 60,000 60,000 60,000
-
3SpecBrights LED Ringlight
Illumination Characteristics
Wavelength (nm)
Inte
nsity
(Wm
-2nm
-1)
Example: RF1-630-VXC100. Refer to website for complete part number matrix.Please contact us for other wavelengths.
Product Numbers
Working Distance (nm)Illu
min
atio
n D
iam
eter
FW
HM
(mm
)
Working Distance (mm)
Irrad
ianc
e (W
/m2)
Distance (mm) from center of illumination field
Product Code
Frontlight Series Wavelength Voltage orCurrent Source
Without or
with Heat Sink
Connector or
Flying Leads
Cable Length(in cm)
R F 1 or 2 365 V or I X or H C or F 100(standard)
395
470
630
740
870
000 (white)
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350
Illum
inat
ion
Diam
eter
FW
HM (m
m)
Working Distance (mm)
RF 1
RF 2
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350
Irrad
ianc
e (W
m-2
)
Working Distance (mm)
RF 1
RF 2
0
0.2
0.4
0.6
0.8
1
1.2
-60 -40 -20 0 20 40 60
Rela
tive
Inte
nsity
Distance from centre of Illumination Field (mm)
50 mm
75 mm
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350
Illum
inat
ion
Diam
eter
FW
HM (m
m)
Working Distance (mm)
RF 1
RF 2
0
0.2
0.4
0.6
0.8
1
1.2
-60 -40 -20 0 20 40 60
Rela
tive
Inte
nsity
Distance from centre of Illumination Field (mm)
50 mm
75 mm
20
18
16
14
12
10
8
6
4
2
0300 400 500 600 700 800 900
400
350
300
250
200
150
100
50
00 50 100 150 200 250 300 350
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350
Illum
inat
ion
Diam
eter
FW
HM (m
m)
Working Distance (mm)
RF 1
RF 2
400
350
300
250
200
150
100
50
00 50 100 150 200 250 300 350
1.2
-60 -40 -20 0 20 40 60
Gre
ysca
le U
nits
1
0.8
0.6
0.4
0.2
0
Custom SolutionsProPhotonix specializes in the provision of custom solutions and can provide other wavelengths, diode powers and optics if required.
Figure 1 - Spectrum of available wavelengths for our LED Ring lightsNote: Intensity (Wm-2nm-1)is based on a RF1 unit used at the optimum working distance
Figure 2- Diameter of field of illumination vs. working distance (Red Units)
Figure 3- Irradiance vs. working distance for RF1 and RF2 (Red Units) measured at maximum operating current (current mode).
Figure 4- Intensity profile for RF1. Working distances of 50mm and 75mm (Red Units)
0
2
4
6
8
10
12
14
16
18
20
300 400 500 600 700 800 900
Inte
nsity
( W
m-2
nm-1
)
Wavelength (nm)
UV (395 nm)
Blue (470 nm)
Red (630 nm)
IR (740 nm)
UV (370 nm)
White0
2
4
6
8
10
12
14
16
300 400 500 600 700 800 900
Inte
nsity
( W
m-2
nm-1
)
Wavelength (nm)
UV (395 nm)
Blue (470 nm)
Red (630 nm)
IR (740 nm)
UV (365 nm)
White
-
ProPhotonix and the ProPhotonix logo are trademarks of ProPhotonix, Inc. All other brand and product names are trademarks or registered trademarks of their respective holders. Copyright © 2012 ProPhotonix, Inc. Printed in the USA. All rights reserved.
Corporate 32 Hampshire Road Salem, NH 03079 [email protected] Tel: +1 603-893-8778 Fax: +1 603-898-8851
Visit us on the Web: www.prophotonix.com
LED Solutions 3020 Euro Business Park, Little Island Cork, Ireland [email protected] Tel: +353-21-5001313 Fax: +353-21-4297749
Laser Solutions Sparrow Lane, Hatfield Broad Oak Hertfordshire, CM22 7BA, UK [email protected] Tel: +44-1279-717170 Fax: +44-1279-717171
Heat SinksFor best operation, the housing temperature should not exceed 45°C. ProPhotonix provides optimized heat sinks for use with our LED ringlights.
For information on controllers and strobe drivers visit www.prophotonix.com
Dimensional Diagrams
• Tyco Mini Universal Mate-N-Lok connectors are avail-able for 24VDC voltage configured lights (i.e. P/N LF1- 630-VXF100) and can be paired with the connectorized AC power adaptor (P/N PTS400-24C) for lab or bench top use. They provide a secure locking mechanism and reverse polarity protection.• Flying leads are standard for current source (I) modules.
Connectors / Flying Leads
Power SuppliesWe offer both universal AC-mains to 24VDC power (2W/500mA) adaptors and standard industrial 24VDC (240W/10A) switching power supplies (P/N PSU-24V- 240W). The power adaptors are offered with connectors (P/N PTS400-24C) for easy connection or as flying leads (P/N PTS400-24F) for use with the CMP or application specific connections. Interchangeable plugs are included for use in any country.
250612
Outer Diameter (O.D) Inner Diameter (I.D) Pitch Circle Diameter (P.C.D.)
Threading mounting hole
Colour White
RF1 2.00” (50.8mm) 2.13” (54.2 mm) 1.08” (27.5 mm) 1.08” (27.5 mm) M3
RF2 2.79” (70.8 mm)2.92” (74.2
mm) 1.87” (47.5 mm) 2.40” (60.8 mm) M3
FINISH:
.XX ±0.05
.X ±0.1
MATERIAL:
TOLERANCES UNLESS4500 Airport Business Park.Cork
StockerYale (IRL)DATEDRAWN
ANGLES ±0.5°OTHERWISE NOTED
MFG ENG
DSGN ENG
CHECKED
PROJ ENG
TITLE
A4
SIZE
SCALE
DATE
DATE
DATE
DATE
CHANGE NOTICE NO.
APPROVALS
REV
SHEET
DWG NO.
OF
PROJECTION
POSSESION TRANSFERRED WITHOUT EXPRESS WRITTEN CONSENT.IT IS NOT TO BE REPRODUCED, MANUFACTURED, OR ITSIS THE EXCLUSIVE PROPERTY OF: STOCKERYALE (IRL).THE CONTENTS OF THIS DOCUMENT WAS ORIGINATED BY AND
1 1
Jacek Kowalczykowski
Ringlight heatsink (small)
51103
29.03.2006
NOTE:1. All dims. in [mm]2. All unspecified tolerances +/-0.1 [mm]3. Break all sharp edges 0.3 [mm]4. No scratches or staining visible on finished surfaces.5. Cosmetic requirements grade 1 unless otherwise specified.
Aluminium 6082
Clear anodise1:1
1
FINISH:
.XX ±0.05
.X ±0.1
MATERIAL:
TOLERANCES UNLESS4500 Airport Business Park.Cork
StockerYale (IRL)DATEDRAWN
ANGLES ±0.5°OTHERWISE NOTED
MFG ENG
DSGN ENG
CHECKED
PROJ ENG
TITLE
A4
SIZE
SCALE
DATE
DATE
DATE
DATE
CHANGE NOTICE NO.
APPROVALS
REV
SHEET
DWG NO.
OF
PROJECTION
POSSESION TRANSFERRED WITHOUT EXPRESS WRITTEN CONSENT.IT IS NOT TO BE REPRODUCED, MANUFACTURED, OR ITSIS THE EXCLUSIVE PROPERTY OF: STOCKERYALE (IRL).THE CONTENTS OF THIS DOCUMENT WAS ORIGINATED BY AND
1 1
Jacek Kowalczykowski
Ringlight heatsink (large)
51104
NOTE:1. All dims. in [mm]2. All unspecified tolerances +/-0.1 [mm]3. Break all sharp edges 0.3 [mm]4. No scratches or staining visible on finished surfaces.5. Cosmetic requirements grade 1 unless otherwise specified.
Aluminium 6082
Clear anodise
29.03.2006
1:1
B
K.MURPHY 29 APR 2009
FINISH:
.XX ±0.05
.X ±0.1
MATERIAL:
TOLERANCES UNLESS4500 Airport Business Park.Cork
StockerYale (IRL)DATEDRAWN
ANGLES ±0.5°OTHERWISE NOTED
MFG ENG
DSGN ENG
CHECKED
PROJ ENG
TITLE
A4
SIZE
SCALE
DATE
DATE
DATE
DATE
CHANGE NOTICE NO.
APPROVALS
REV
SHEET
DWG NO.
OF
PROJECTION
POSSESION TRANSFERRED WITHOUT EXPRESS WRITTEN CONSENT.IT IS NOT TO BE REPRODUCED, MANUFACTURED, OR ITSIS THE EXCLUSIVE PROPERTY OF: STOCKERYALE (IRL).THE CONTENTS OF THIS DOCUMENT WAS ORIGINATED BY AND
1 1
Jacek Kowalczykowski
Ringlight heatsink (large)
51104
NOTE:1. All dims. in [mm]2. All unspecified tolerances +/-0.1 [mm]3. Break all sharp edges 0.3 [mm]4. No scratches or staining visible on finished surfaces.5. Cosmetic requirements grade 1 unless otherwise specified.
Aluminium 6082
Clear anodise
29.03.2006
1:1
B
K.MURPHY 29 APR 2009
10
45º
Ø27,5
Ø42,4
Ø75
4 holes M4, 8mm deep
45º
Ø60,8
Ø67,5
4 holes M4, 8mm deep
Ø98,2
10
Rear ViewSide ViewFront View
Lensed Area4x Mounting Holes
O.D.
I.D.
17 Pitch Circle Diameter