led- power supply · output voltage* output current* lt60-42/1400-dpa 18 – 42 v dc 350 – 1400...

LED-

POWER SUPPLY

ModelOutput

Voltage*Output

Current*

LT10-12/1000-UP1 8 – 12 VDC 0 – 1000 mA

LT10-24/500-UP1 8 – 24 VDC 0 – 500 mA

LT10-36/350-UP1 8 – 37 VDC 0 – 350 mA

LT10-36/300-UP1 8 – 37 VDC 0 – 300 mA

LT20-24/850-UP1 12 – 24 VDC 0 – 850 mA

LT20-31/700-UP1 15 – 31 VDC 0 – 700 mA

LT20-36/600-UP1 15 – 37 VDC 0 – 600 mA

1 without DIMMbox-Connection

LT UP

ModelOutput

Voltage*Output

Current*

LT06-12/450-SN 12 VDC 450 mA

LT18-24/750-SN 24 VDC 750 mA

LT SN

ModelOutput

Voltage*Output

Current*

LT10-12/7001 1 – 12 VDC 3 – 700 mA

LT10-16/7001 1 – 16 VDC 3 – 700 mA

LT10-24/5501 1 – 24 VDC 3 – 550 mA

LT10-32/3501 2 – 32 VDC 3 – 350 mA

LT10-32/350-DB 8 – 32 VDC 3 – 350 mA

LT10-36/3001 8 – 37 VDC 0 – 300 mA

1 without DIMMbox-Connection

LT 10

10 / 20 Watt series

06 / 18 Watt series

10 Watt series

Application

• LED Lights

Characteristics

• Voltage and current regulation

in a single unit

• Low profile: 21 x 30 mm, small size

• Continuous short circuit protection

• Overload protection

• Over-temperature protection

• Various mounting options:

Screws, cable ties, ...

• Dimming via DALI, 1-10 V or Switch

dimming by external DIMMbox

• Degree of protection:

IP20, IP67 (LT-UP)

Technical data

Input voltage 220 to 240 VAC

100 to 120 VAC (-SN version)

Input current 150 mA (LT 10 UP), 200 mA (LT 20 UP),

150 mA (LT 06), 400 mA (LT 18),

90 mA (LT 10)

Frequency 50 to 60 Hz

Efficiency up to 91% typ. at maximum load

EMC complies with EN 55012, EN 61000-3-2,

EN 62384, EN 61547

Tolerance of output voltage ± 2%

Environmental conditions

Operating temperature -20° to +45°C at maximum load

Storage temperature -40° to +70°C

Humidity 5% to 90% non-condensing

Overvoltage protection complies with IEC 61000

safety standard

Safety Standards

Norms fulfil Class II according to the following

standards: EN / IEC 61437-1,

EN / IEC 61347-2-13

Lifetime

MTBF 200,000 hours at maximum load

and ambient temperature of + 25° C

(According to MIL-HDBK-217)

Mechanical Data

Weight 90 g (LT 10 UP), 125 g (LT 20 UP),

105g (LT 06), 170g (LT 18), 50 g (LT 10)

Connector Terminal block 0,5..1,5mm²

LT Cap

LED Converter

LT Cap for LT 10, LT 20,

LT 40, LT 60, LT 100

and DIMMbox

LT SQ Cap for LT 40 SQ,

LT 60 SQ

LT Cap Slim for LT 10, LT 20,

LT 40, LT 60, LT 100

and DIMMbox

LT Cap Short Slim for LT 10, LT 20,

LT 40, LT 60, LT 100

and DIMMbox

Accessories

* Units are delivered with the highest specified voltage and current values.

All products meet the standards EN61347-1 and EN61347-2-13

LT10 UP LT20 UP

112

3021

12,1

120

57±0,3

65±0

,568±0

,528±0

,3

52±0

,2

85±0,2

39,5±0

,5

ModelOutput

Voltage*Output

Current*

LT20-24/833 15 – 24 VDC 0 – 833 mA

LT20-28/700 5 – 28 VDC 350 – 700 mA

LT20-28/700/1-10V 5 – 28 VDC 350 – 700 mA

LT20-36/600 15 – 37 VDC 0 – 600 mA

LT20-40/450 15 – 40 VDC 0 – 450 mA

LT20-40/500 10 – 40 VDC 200 – 500 mA

LT20-40/500/1-10V 10 – 40 VDC 200 – 500 mA

LT20-48/200 15 – 48 VDC 0 – 200 mA

LT20-48/350 15 – 48 VDC 100 – 350 mA

LT20-48/417 15 – 48 VDC 0 – 417 mA

LT20-48/350/1-10V 15 – 48 VDC 100 – 350 mA

LT 20

ModelOutput

Voltage*Output

Current*

LT40-24/1400 10 – 24 VDC 700 – 1.400 mA

LT40-24/1400/1-10V 10 – 24 VDC 700 – 1.400 mA

LT40-24/1460 10 – 24 VDC 700 – 1460 mA

LT40-27/1150 17 – 27 VDC 0 – 1150 mA

LT40-36/900 15 – 36 VDC 0 – 900 mA

LT40-36/1050 15 – 37 VDC 500 – 1050 mA

LT40-36/1050/1-10V 15 – 36 VDC 500 – 1050 mA

LT40-48/700 22 – 48 VDC 350 – 700 mA

LT40-48/700/1–10 V 22 – 47 VDC 0 – 700 mA

LT 40

Application

• LED Lights

Characteristics


in a single unit

• Low profile:

21 x 30 mm (LT 10 – LT 60)

• Active PFC starting LT 40

• Continuous short circuit protection





• Dimming via DALI, 1-10 V or

Switch dimming by external

DIMMbox

• Degree of protection:

IP20, IP67 (LT 40 WP)

Technical data


100 to 120 VAC (-US version)

100 to 240 VAC (-WR version)

Input current 200 mA (LT 20), 180 mA (LT 40),

180 mA (LT 40 WP), 180 mA (LT 40 SQ)


Efficiency up to zu 91% typ. at maximum load


EN 62384, EN 61547



Operating temperature -20° to +45° C at maximum load

Storage temperature -40° to +70° C


Overvoltage protection complies with IEC 61000

safety standard

Safety Standards

Norms fulfil Class II according to the

following standards: EN / IEC 61437-1,

EN / IEC 61347-2-13

Lifetime




Mechanical Data

Weight 82 g (LT 20), 106 g (LT 40),

200 g (LT 40 WP), 125 g (LT 40 SQ)


ModelOutput

Voltage*Output

Current*

LT40-24/1400-WP1 10 – 24 VDC 700 – 1400 mA

LT40-36/1050-WP1 15 – 36 VDC 500 – 1050 mA

LT40-48/700-WP1 22 – 48 VDC 350 – 700 mA1 Without DIMMbox-Connection

LT 40 WP

20 Watt series

40 Watt series

40 Watt series

ModelOutput

Voltage*Output

Current*

LT40-24/1400-SQ 10 – 24 VDC 700 – 1400 mA1

LT40-36/1050-SQ 15 – 36 VDC 500 – 1050 mA1

LT40-48/700-SQ 22 – 48 VDC 350 – 700 mA1

LT 40 SQ 40 Watt series


SYST

EMPA

RTN

ER

153145

3012

,121

188180

21 12,1

30

3,6

190200

30

21

90100

5060

21

ModelOutput

Voltage*Output

Current*

LT100-24/4200 15 – 24 VDC 0 – 4200 mA

LT100-36/2800 22 – 36 VDC 0 – 2800 mA

LT100-48/2100 30 – 48 VDC 0 – 2100 mA

LT100-142/700/1-10V 100 – 142 VDC 0 – 700 mA

LT100-285/350/1-10V 190 – 285 VDC 0 – 350 mA

LT100-330/300** 230 – 330 VDC 0 – 300 mA

ModelOutput

Voltage*Output

Current*

LT60-24/2500 15 – 24 VDC 0 – 2500 mA

LT60-36/1200 22 – 37 VDC 0 – 1200 mA

LT60-36/1500 22 – 37 VDC 0 – 1500 mA

LT60-36/1600 22 – 36 VDC 0 – 1600 mA

LT60-48/1200 30 – 48 VDC 0 – 1200 mA

LT60-24/2500-WR/1-10V 24 VDC 0 – 2500 mA1

LT60-85/700/1-10V 40 – 85 VDC 0 – 700 mA

LT60-170/350/1-10V 100 – 170 VDC 0 – 350 mA

1 Wide input range 100 - 240VAC, LT100 housing

LT 60

ModelOutput

Voltage*Output

Current*

LT60-24/2500-SQ 15 – 24 VDC 0 – 2500 mA

LT60-36/1600-SQ 22 – 36 VDC 0 – 1600 mA

LT60-36/1500-SQ 22 – 37 VDC 0 – 1500 mA

LT60-36/1200-SQ 22 – 37 VDC 0 – 1200 mA

LT60-36/1500-SQ-US 22 – 37 VDC 0 – 1500 mA

LT60-36/1200-SQ-US 22 – 37 VDC 0 – 1200 mA

LT60-48/1200-SQ 30 – 48 VDC 0 – 1200 mA

LT 60 SQ

ModelOutput

Voltage*Output

Current*

LT60-42/1400-DPA 18 – 42 VDC 350 – 1400 mA

Adjustable output currents by customer including DALI, Push dimming and 1-10 V.

LT 60 DPA

LT 100

60 Watt series

60 Watt series

60 Watt series

100 Watt series

Characteristics


in a single unit

• Low profile:

21 x 30 mm (LT 10 – LT 60),

24 x 30 mm (LT 100)

• Active PFC starting LT 40

• Continuous short circuit

protection





• Dimming via DALI, 1-10 V or

Switch dimming by external

DIMMbox Degree of protection:

IP20

Technical data


100 to 120 VAC (-US version)

100 to 240 VAC (-WR version)

Input current 300 mA (LT 60), 450 mA (LT60 SQ),

300 to 325 mA (LT 60 DPA),

480 mA (LT 100)


Efficiency to zu 91% typ. at maximum load


EN 62384, EN 61547



Operating temperature -20° to +45°C at maximum load

Storage temperature -40° to +70°C


Overvoltage protection complies with IEC 61000 safety

standard

Safety Standards



EN / IEC 61347-2-13

Lifetime




Mechanical Data

Weight 150g (LT 60 SQ), 392 g (LT 60 DPA),

185 g (LT 100)


Application

• LED Lights

LT 100

* Units are delivered with the highest specified voltage and current values. ** In preparation

100

Made in Germany

6050

130120

232240

30

2112

,1

305297

30

24 2112

,1

170

30

Application

• LED Lights

Characteristics

• Dimming via DALI,

1–10 V, WLAN

Push-Dimm oder PWM

• For voltage and current

regulation at LT series with CTRL

• Low profile: 21 x 30 mm



• Degree of protection: IP20

Technical data

Input voltage 15 to 50 VDC (DIMMbox),

12 to 42 VDC (DIMMbox WLAN)

Input current 0 to 5 A (DIMMbox),

0 to 12 A (DIMMbox WLAN)


Efficiency up to zu 91% typ. at maximum load


EN 62384, EN 61547



Operating temperature -20° to +45° C at maximum load

Storage temperature -40° to +70° C


Overvoltage protection complies with IEC 61000 safety

standard

Safety Standards



EN / IEC 61347-2-13

Lifetime




Mechanical Data

Weight 57 g (DIMMbox), 61 g (LS 12),

35g (SOPN-Sensorboard)


ModelOutput

Voltage*Output

Current*

DIMMbox 15 – 50 VDC 5.000 mA

DIMMbox 1-10 AUS 15 – 50 VDC 5.000 mA

DIMMbox CV max. 48 VDC 5.000 mA

Function Description:At the input of the DIMMbox is a power supply / LED Driver connected, powering the DIMMbox and the connected LEDs. The brightness control is based by a pulse width modulation (PWM) at LED output connector. The switching frequency is 600 Hz. DIMMbox-CV is only provided for constant voltage operation.

DIMMbox

ModelOutput

Voltage*Output

Current*

DIMMbox-WLAN 12 - 42 VDC 3 x 4000 mA

Function Description:The DIMMbox-WLAN can be controlled via a wireless con-nection (WLAN). Three LED output lines can be separately toggled on or off. Also separate light brightness control is possible per channel.

DIMMbox WLAN DIMMbox

DIMMbox

ModelOutput

Voltage*Output

Current*

LS12/100-DPA 13 ± 1 VDC 100 mA

LS12/100-A 13 ± 1 VDC 100 mA

Function Description:The lighting control is a converter of light control signals. The output interface is an advanced 1-10V interface. As control inputs you can use DALI, PUSHDIMM, a PWM signal or 1-10V analog dim voltage. In the version LS12 / 100-A (just low cost analog input) the control inputs DALI and PUSHDIMM are not available. The output interface is tuned to work with Friwo LED driver with integrated 1-10V interface. Additional feature is to control up to 100 LED drivers with only one light control unit (LS12).

LS 12 Light-control-unit

ModelInput

VoltageOutput Signal

SOPN-Sensorboard 12 – 24 VDC

PWM (1kHz;

0V =low /5V=high)

Function Description: The sensor module continuously measures the illumination of the area. This result is a mix of the light from the LED lighting and the natural daylight. Changes based on the natural daylight reflect automatically in a adaption of the LED illumination to bring the light on a preset value to cre-ate an constant illumination at the surface. The senor board switches off automatically if the natural daylight reaches the preset value or will not switch on. Presence detection is based on an intereated motion sensor.

SOPN-Sensorboard Sensorboard


SYST

EMPA

RTN

ER

Made in Germany

2112

,130

145

153

2112

,130

145

153

2112

,130

145

153

5949,8

40,6 - 0,2

12,5312,53

1,35

13,7

16,4

±0,

1

42

Ø 5

Ø 10

Ø 3,

2

15,6

3

8,6

12,6

2

Rev. 2.0

POWER SUPPLY

HeadquarterGewerbegebiet Ost 7 D-91085 WeisendorfTel. +49 9135 73666-0 Fax +49 9135 73666-60 [email protected]

Opto Competence CentreBeimoorkamp 3D-22926 AhrensburgTel. +49 4102 66601-0 Fax +49 4102 66601-66 [email protected]

led- power supply · output voltage* output current* lt60-42/1400-dpa 18 – 42 v dc 350 – 1400...

Documents