led panel lights

2
LED Panel Lights 12V LED Panel Lights It is of high efficiency and energy saving, consumption of electricity one thousand hours only a few degrees (60W incandescent light seventeen hours consumption 1 kwh of electricity, common 10W energy-saving lamps one hundred hours consumption 1 kwh of electricity).Its long life, the semiconductor chip light emitting, no filament, glass bubble, vibration resistance, not easily broken, service life of up to fifty thousand hours (incandescent life of only one thousand hours, the ordinary energy-saving lamp service life of only eight thousand hours).It is healthy, 12V LED panel lights health ultraviolet and infrared light does not contain, do not produce radiation (ordinary light containing ultraviolet and infrared).It is green: do not contain harmful elements such as mercury and xenon, beneficial to recovery and, but does not produce electromagnetic interference (common lamps containing mercury and lead and other elements, energy-saving lamp electronic ballast will generate electromagnetic interference).It protects vision: DC drive, no stroboscopic (ordinary lamps are AC drive, it produces a strobe).Its high optical efficiency: fever, 90% of the electrical energy can be converted into visible light (ordinary incandescent lamp of 80% electric energy into heat energy, only 20% of the electrical energy into light).Its high safety coefficient: the required voltage, current is smaller, less heat, do not produce safe hidden trouble, in mines and other dangerous places. Its market potential: low voltage, DC power supply, battery, solar power, in remote areas and the field of lighting power, less electric field. Ordinary Ceiling Light Panel LED energy saving lamp in AC drive and ordinary incandescent lamp will flicker, while ordinary energy-saving lamp without stroboflash phenomenon. The strobe can cause eye fatigue. Each of the LED light bulbs will strongly stimulate the eyes, even a short period of time, while ordinary ceiling light panel is relatively softer! Irradiation angle limit, generally only irradiated by 120 °, and the ordinary energy-saving lamps almost can be irradiated by 360 °.Irradiation room brightness is not better than the energy-saving lamps excellent, because led only in the small open angle with high brightness, and the deviation from the angle of light rapid weakening. Therefore, LED energy-saving lamps for indoor lighting advantage is not better than ordinary energy-saving lamp is obvious, but as a flashlight, table lamp, spotlights and other only narrow angle lamps when used irradiated is still very good.

Upload: puppyboat81

Post on 28-Jul-2015

63 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: LED Panel Lights

LED Panel Lights

12V LED Panel Lights

It is of high efficiency and energy saving, consumption of electricity one thousand hours only

a few degrees (60W incandescent light seventeen hours consumption 1 kwh of electricity,

common 10W energy-saving lamps one hundred hours consumption 1 kwh of electricity).Its

long life, the semiconductor chip light emitting, no filament, glass bubble, vibration resistance,

not easily broken, service life of up to fifty thousand hours (incandescent life of only one

thousand hours, the ordinary energy-saving lamp service life of only eight thousand hours).It

is healthy, 12V LED panel lights health ultraviolet and infrared light does not contain, do not

produce radiation (ordinary light containing ultraviolet and infrared).It is green: do not contain

harmful elements such as mercury and xenon, beneficial to recovery and, but does not

produce electromagnetic interference (common lamps containing mercury and lead and other

elements, energy-saving lamp electronic ballast will generate electromagnetic interference).It

protects vision: DC drive, no stroboscopic (ordinary lamps are AC drive, it produces a

strobe).Its high optical efficiency: fever, 90% of the electrical energy can be converted into

visible light (ordinary incandescent lamp of 80% electric energy into heat energy, only 20% of

the electrical energy into light).Its high safety coefficient: the required voltage, current is

smaller, less heat, do not produce safe hidden trouble, in mines and other dangerous places.

Its market potential: low voltage, DC power supply, battery, solar power, in remote areas and

the field of lighting power, less electric field.

Ordinary Ceiling Light Panel

LED energy saving lamp in AC drive and ordinary incandescent lamp will flicker, while

ordinary energy-saving lamp without stroboflash phenomenon. The strobe can cause eye

fatigue. Each of the LED light bulbs will strongly stimulate the eyes, even a short period of

time, while ordinary ceiling light panel is relatively softer! Irradiation angle limit, generally only

irradiated by 120 °, and the ordinary energy-saving lamps almost can be irradiated by 360

°.Irradiation room brightness is not better than the energy-saving lamps excellent, because

led only in the small open angle with high brightness, and the deviation from the angle of light

rapid weakening. Therefore, LED energy-saving lamps for indoor lighting advantage is not

better than ordinary energy-saving lamp is obvious, but as a flashlight, table lamp, spotlights

and other only narrow angle lamps when used irradiated is still very good.

Page 2: LED Panel Lights

LED Energy-Saving Lamps Advantages

LED energy-saving lamps of the other advantages include, no light pollution and thermal

radiation, maintenance-free, easy to control, environmental protection, no ultraviolet and

harmless to the human body.

This article come from:http://cell.battery-products.com/led-panel-lighting/led-panel-lights.htm