led mr16 data sheet
TRANSCRIPT
DAT
A SH
EET
Product informationThis new design in the LED MR16 range, offers a fantastic energy saving replacement option for the 35W and 50W Halogen solution. It is available in three colour temperatures with a smooth heat sink and flat front face.
Features & Benefits• 35W and 50W equivalent• Total Lumens: up to 670• 15 000 hours solution (L70/B50)• Three colour temperatures: 2700K, 3000K, 4000K• “F”, “G” Energy Class• Beam angle: 35°• Warranty: 2 years with maximum 8000 burning hours according to Tungsram Operations Kft. Standard Warranty conditions
IEC Standards
LED MR165W and 7W LED equivalentsfor 35W and 50W Halogen products
Application areas
HospitalityHome
Retail
• EN 55015: 2013+A1:2015: Limits and methods of measurement of radio disturbance characteristics of electri cal lighting• EN 61547: 2009: Equipment for general lighting purposed EMC immunity requirements• EN 61000-3-2: 2014: Electromagnetic compatibility (EMC) –Part 3-2: Limits –Limits for harmonic current emissions (equipment input current up to and including 16A per phase)• EN 61000-3-3: 2013: Electromagnetic compatibility (EMC) –Part 3-3: Limits –Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up to 16A
Specification summary
Product Code
Direct Shipment Product Code
Product DescriptionNominal/
Rated Power (W)
ReplWatt(W)
Nominal/ Rated
Lumens(lm)
Nominal/ RatedUseful
Lumens (lm)
Rated Peak
Intensity (cd)
CCT (K)
WEC(kwh/1000h)
Pack Qty
93094225 93094456 LED Start MR16 5W(35) 827 35° 5,0 35 380 350 700 2700 5,0 1/8
93094457 93094458 LED Start MR16 5W(35) 830 35° 5,0 35 380 350 700 3000 5,0 1/8
93094459 93094460 LED Start MR16 5W(35) 840 35° 5,0 35 400 360 750 4000 5,0 1/8
93094467 93094468 LED Start MR16 7W(50) 827 35° 7,0 50 650 621 1200 2700 7 1/8
93094469 93094470 LED Start MR16 7W(50) 830 35° 7,0 50 650 621 1200 3000 7 1/8
93094471 93094472 LED Start MR16 7W(50) 840 35° 7,0 50 670 630 1300 4000 7 1/8
Dimensions (mm)
Thermal test point
• Ths Max 96°C
Recommended operation temperatureCommon attributes• Nominal/ Rated Life (L70/B50 hours): 15 000 Hrs• Cap/Base: GU5.3• Nominal/Rated Beam Angle : 35°• Input Voltage 12V• Colour Rendering Index >80• Start-up/Warm-up time: <500 ms• Switching Cycles: 30 000• Power factor: 0.7 for 35Weq and 0.9 for 50Weq• Lumen Maintenance Factor: 0.7• Colour consistency: <6 SDCM• A+ Energy Efficiency• Non-dimmable
Packaging image
Operation and maintenance• Store and use the lamps the same way as traditional lamps.• Check your fixtures are properly wired and don’t deliver voltage spike to lamps causing overheating/failure.• Ambient temperature range -20° C to 40°C• Lamps should be kept free from contamination.• Good condition of the lamp-holder contacts is important to ensure proper operation of lamp.• Ensure lamp is cool before removing.• Switch off mains supply before installing/removing lamps.• Not for use in totally enclosed recessed fixtures.• These Tungsram LED Start MR16 35&50W equivalent products are non-dimmable.
Specification summary
Product Code
Direct Shipment Product
Code
Product DescriptionNominal/
Rated Power (W)
ReplWatt(W)
Nominal/ Rated
Lumens(lm)
Nominal/ RatedUseful
Lumens (lm)
Rated Peak
Intensity (cd)
CCT (K)
Energy Efficiency
Class
Pack Qty
93094225 93094456 LED Start MR16 5W(35) 827 35° 5,0 35 380 350 700 2700 G 1/8
93094457 93094458 LED Start MR16 5W(35) 830 35° 5,0 35 380 350 700 3000 G 1/8
93094459 93094460 LED Start MR16 5W(35) 840 35° 5,0 35 400 360 750 4000 G 1/8
93094467 93094468 LED Start MR16 7W(50) 827 35° 7,0 50 650 621 1200 2700 F 1/8
93094469 93094470 LED Start MR16 7W(50) 830 35° 7,0 50 650 621 1200 3000 F 1/8
93094471 93094472 LED Start MR16 7W(50) 840 35° 7,0 50 670 630 1300 4000 F 1/8
Dimensions (mm)
Thermal test point
• Ths Max 96°C
Recommended operation temperatureCommon attributes• Nominal/ Rated Life (L70/B50 hours): 15 000 Hrs• Cap/Base: GU5.3• Nominal/Rated Beam Angle : 35°• Input Voltage 12V• Colour Rendering Index >80• Start-up/Warm-up time: <500 ms• Switching Cycles: 30 000• Power factor: 0.7 for 35Weq and 0.9 for 50Weq• Lumen Maintenance Factor: 0.7• Colour consistency: <6 SDCM• Non-dimmable
Packaging image
Operation and maintenance• Store and use the lamps the same way as traditional lamps.• Check your fixtures are properly wired and don’t deliver voltage spike to lamps causing overheating/failure.• Ambient temperature range -20° C to 40°C• Lamps should be kept free from contamination.• Good condition of the lamp-holder contacts is important to ensure proper operation of lamp.• Ensure lamp is cool before removing.• Switch off mains supply before installing/removing lamps.• Not for use in totally enclosed recessed fixtures.• These Tungsram LED MR16 35&50W equivalent products are non-dimmable.
GGAGFFA
G
Energy efficiency class (A-G)*
Spectral distributions
5W - 2700K 5W - 3000K
7W - 2700K
7W - 4000K
5W - 4000K
7W - 3000K
All values 180-400nm are 0
0
1
2
3
4
5
6
7
8
9
10
WL(
nm)
394
409
424
439
454
469
484
499
514
529
544
559
574
589
604
619
634
649
664
679
694
709
724
739
754
769
spec
tral
pow
er in
tens
ity (m
w/n
m)
wavelenght(nm)
Spectral intensity distribution
0
1
2
3
4
5
6
7
8
9
10
380
395
410
425
440
455
470
485
500
515
530
545
560
575
590
605
620
635
650
665
680
695
710
725
740
755
770
spec
tral
pow
er in
tens
ity(m
w/n
m)
wavelenght(nm)
Spectral intensity distribution
0
1
2
3
4
5
6
7
8
9
WL(
nm)
395
411
427
443
459
475
491
507
523
539
555
571
587
603
619
635
651
667
683
699
715
731
747
763
779
spec
tral
pow
er in
tens
ity(m
w/n
m)
wavelenght(nm)
Spectral intensity distribution
0
2
4
6
8
10
12
14
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780Sp
ectra
l Pow
er in
tens
ity (m
W/n
m)
Wavelength (nm)
Spectral Power Distribution
0
2
4
6
8
10
12
14
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
Spec
tral P
ower
inte
nsity
(m
W/n
m)
Wavelength (nm)
Spectral Power Distribution
We in Tungsram Operations Kft. are constantly developing and improving our products. For this reason, all product descriptions in this catalogue are intended as a general guide, and we may change specifications from time to time in the interest of product development, without prior notification or public announcement. All descriptions in this publication present only general particulars of the goods to which they refer and shall not form part of any contract. Data in this guide has been obtained in controlled experimental conditions. However, Tungsram cannot accept any liability arising from the reliance on such data to the extent permitted by law. Tungsram LED MR16 Datasheet – September 2021 tungsram.com