LED LIGHTSFor Hot & cold Foodservice applications

• All Component Hardware LEDs are rated for 50,000 hour life – 50x standard incandescent bulb• Mercury-free • Instant-on • No ultraviolet emission• Five-year warranty on parts

Cooler-Freezer & Ambient Temperature Applications

Model No. Actual Length Watts Lumens

LED-T40510-x* 10-3/8” (263mm) 5 550

LED-T40614-x* 14-9/16” (370mm) 6 360

LED-T40818-x 18-1/2” (470mm) 8 680

LED-T40920-x 20-1/4” (515mm) 9 760

LED-T41022-x 22” (560mm) 10 850

LED-T41230-x 30-1/8” (764mm) 12 1000

LED-T41435-x 35-1/2” (263mm) 14 1200

LED-T41641-x 41-3/8” (1051mm) 16 1400

LED-T41847-x 47-1/2” (1200mm) 18 1600

Packed 6 per master carton

Linkable, Low Profile, High Output LED Lights Designed for Display Applications

• Operating temperature from 104ºF to -4ºF (40ºC to -20ºC) • Link up to 10 fixtures together for maximum flexibility

• Clear, high impact polycarbonate lens with ribs for maximum light dispersion

Model No. Description Length

LED-T4-X001 Power Cord, No Plug 6’ (1.83m)

LED-T4-X002

Connecting Cable

6” (152mm)

LED-T4-X003 12” (305mm)

LED-T4-X004 24” (610mm)

LED-T4-X005 36” (915mm)

LED-T4-X006 Power Cord, No Plug 6” (152mm)

Power cords and connecting cables sold separately

*Does not include on/off switch.Available in 3 color temperatures - designate “W” for 3000K; “N” for 4100K; “C” for 6400K

www.componenthardware.com

LED Motion Sensor Light for Walk-In Refrigeration• Senses motion in 16 ft range from 8 ft away

Model No. Watts Lumens Kelvins Operating Temp Description

LED-321420C18

2000 6000

-4ºF to 140ºF (-20ºC to 60ºC)

Bulb with GlobeLED-321420W 1600 3000

VXS-LED-PC20C18

2000 6000 Complete Fixture with Bulb and GlobeVXS-LED-PC20W 1600 3000

Visit our website for an interactive payback calculator.

Model No. Watts Lumens Kelvins Operating Temp Description

VXS-LEDN10PC10 1040 4500

-20ºF to 140ºF (-30ºC to 60ºC)

Complete Fixture with Bulb and Globe

LED-321410N Bulb Only

LED Light for Walk-In Refrigeration

Model No. Watts Lumens Kelvins Operating Temp Globe

LED-321407C

7 700 5800-6300 -4ºF to 140ºF (-20ºC to 60ºC)

Bulb Only

L20-1010-L07C Frosted

L201010L07CCL Clear

LED-321403C 3 240 4500 Bulb Only

LED Lights for Reach-In Refrigerators & Freezers• LED bulb replaces 40W incandescents • Edison base for simple installation

C® C US®

LISTED 4VN4LED LAMP

COMPONENT

Cooler-Freezer Applications

Model No. Length Watts Lumens Kelvins

L82-1030-L13W

36” 26

2360 2800 - 3500

L82-1030-L13N 2500 4500 - 5500

L82-1030-L13C 2600 5500 - 6500

L82-1040-L22W

48” 44

3560 2800 - 3500

L82-1040-L22N 3800 4500 - 5500

L82-1040-L22C 4000 5500 - 6500

LED Recessed Light Fixtures for Exhaust Canopy Hoods• Lamps consume less than 5.5 watts per foot • Max operating temp 80ºC (176ºF)

• Contributes to LEED® energy use reduction credits • Highest lumen output per watt available • Recess mount installation • Only 4-1/2” high for limited clearance applications

Model No. Length Watts Lumens Kelvins

LED24X419C 24” 9 800 5700K-6300K

LED48X62221C

48” 44

3470 5500K-6500K

LED48X62221N 3250 4500K-5500K

LED48X62221W 3000 2700K-3500K

LED Surface Mount Light Fixtures for Cooler/Freezer Applications• Resilient, one-piece silicone gasket rated IP-65 for damp & wet locations • Superior highly-polished aluminum reflector improves light output

• Low profile design • Corrosion-free, high impact polycarbonate housing • Clear, high impact polycarbonate lens with ribs for max. light dispersion• Supplied with NEC-approved luminaire disconnects • Operating temperature range from -40°F to 104°F (-40°C to 40°C)

Model No. Actual Length Watts Lumens

LED-T40510-x* 10-3/8” (263mm) 5 550

LED-T40614-x* 14-9/16” (370mm) 6 360

LED-T40818-x 18-1/2” (470mm) 8 680

LED-T40920-x 20-1/4” (515mm) 9 760

LED-T41022-x 22” (560mm) 10 850

LED-T41230-x 30-1/8” (764mm) 12 1000

LED-T41435-x 35-1/2” (263mm) 14 1200

LED-T41641-x 41-3/8” (1051mm) 16 1400

LED-T41847-x 47-1/2” (1200mm) 18 1600

Packed 6 per master carton

Model No. Watts Lumens Kelvins Operating Temp

LED48X762N 62 6000 4500-5000 -40ºF to 104ºF (-40ºC to 40ºC)

LED Light Fixture for Walk-In Coolers & Freezers• 100 lumens per watt light output • 50 foot candles at 5 ft • LED strips and driver replaceable without tools

Model No. Globe Watts Lumens Kelvins

L55-LEDN-1004Coated Glass 12

960 4500

L55-LEDW-1004 930 2800

L55-LEDN-1024Coated Glass, Wire Guard 12

960 4500

L55-LEDW-1024 930 2800

L55-LEDN-2004Tempered Glass 12

960 4500

L55-LEDW-2004 930 2800

L55-LEDN-2024Tempered Glass, Wire Guard 12

960 4500

L55-LEDN-2024 930 2800

LED-40000 Bulbs Complete with Light Fixture

800-526-3694

LED Edison-base Light for Exhaust Canopy Hoods• Only UL Listed Edison-base LED bulb rated to 80ºC (176ºF)

• 120 degree beam angle floods the workspace with light • 90 to 260 VAC• Exceeds Federal Energy Act requirement • Unbreakable polycarbonate enclosure

Model No. Watts Lumens Kelvins Max Operating Temp*

LED-40000N-B

12960 4500 - 5500

80ºC (176ºF)

LED-40000N-P**

LED-40001N(includes globe)

LED-40000W-B 930 2800 - 3500

*Bulb performance is not guaranteed if exposed to temperatures above 80ºC**In blister pack for POS display

Design Patent number D715,463 s – Patent PenDing

High Temperature Canopy Hood Applications

Cooler-Freezer Applications

C® C US®

LISTED 4VN4LED LAMP

COMPONENT

®

Why LEDs?The Energy Independence and Security Act of 2007 was signed into law by President Bush on December 19, 2007. EISA requires 27% greater efficiency for light bulbs, to be phased in from 2012 to 2014. Phase-out of traditional 100W incandescent light bulbs began in January, 2012; 75W bulbs will follow in 2013 and 60W and 40W bulbs will no longer be imported or manufactured after January 1, 2014. As incandescent bulbs become harder to find, operators will be forced to upgrade to other types of bulbs.

While low wattage fluorescent lights meet this standard, LED (Light Emitting Diode) bulbs have many advantages over fluorescents. LEDs are rapidly becoming the standard for most lighting needs and as technology improves prices will become more competitive with fluorescents.

Benefits of LEDs • Long Life - LED bulbs are rated at 50,000 hours - 5 times longer than fluorescents.

• Durability - LEDs are encased in high impact plastic so they are practically unbreakable and unlike fluorescents, they are not affected by frequent on/off cycling.

• Low Operating Temperature - Light is produced by diodes, which emit very little heat - on average 3.4 BTUs/hr. They stay cool to the touch and do not significantly increase the temperature of the ambient space.

• Environmental Safety - No mercury is used in the manufacturing of LEDs. There are no special hazardous material procedures required for disposing of spent bulbs.

• Energy Efficiency - LED lamps produce 5 times more light (lumens) per watt than incandescents and operate on wattages similar to fluorescents.

• Temperature Impact - Prolonged heat can significantly shorten the useful life of many LEDs. Component Hardware has designed its LED lights for specific applications to ensure maximum life expectancy. Our LED-40000 bulbs, for example, have enlarged heat sinks to conduct the heat away from the diodes.

• Lower Maintenance Costs - Besides the superior service life and durability of LEDs, they do not require a ballast, which can malfunction.

• Instant On - Fluorescent lights that do not instantly start (pre-heat types) have a longer life than “instant start” types, but since most ballasts do not operate well at cooler temperatures (<50ºF), lights in walk-in coolers and freezers may need to be left on constantly. LED lights do not have a ballast so lights come on immediately.

Disadvantages of CFLs • Environmental Issues - Compact fluorescent lights (CFLs) contain mercury, a toxic substance. Nine states have banned CFLs from their landfills. For detailed information on how to clean up and safely dispose of CFL bulbs, visit www.epa.gov/cflcleanup.

• Useful Life - CFLs are negatively impacted by frequent cycling on and off.

• Health Issues - CFLs emit ultraviolet rays, a cause of skin cancer. Flickering of CFLs, caused by power fluctuations and sometimes too rapid for the eye to recognize, has been linked to migraines, sleep abnormalities, fatigue and other health problems.

• Temperature Impact - The life of electronic components in CFL ballasts is reduced dramatically with elevated temperatures. An industry rule-of-thumb states that for every 20-degree increase in temperature, capacitor life is reduced by half. Typical CFLs have a temperature operating range that tops out at 100ºF.

• Light Output - New technology LEDs produce more lumens per watt than CFLs. Studies have shown that CFLs lose their light output over time. The cheaper the CFL, the faster it will fail.

Selection GuideUnderstanding some common lighting terms will help you to choose the right bulb for your application.

• Beam Angle - The measure of the spread of light from the source. The greater the beam angle, the less the intensity of light. Large beam angles are best suited for lamps rated greater than 5 watts. LED lamps that have beam angles in the 120 degree range are ideal for replacing incandescent and fluorescent bulbs.

• Color Rendering Index (CRI) - Measures on a scale of 1 to 100, the CRI indicates how well the light allows the viewer to perceive the true color of an object. LED bulbs typically rate between 70 and 95; the best CFLs rate in the mid 80s.

• Kelvin - The measurement of color temperature, or hue, of light. Sunlight equals about 5000 K, sometimes referred to as natural light. Color temperatures over 5000 K are called cool colors (bluish white) while lower color temperatures (2700 - 3000 K) are referred to as warm colors (yellowish white through red).

• Lumen - The standard of measurement of the light produced by the bulb. The more lumens, the brighter the bulb. Lumen is becoming the new standard for comparing bulbs.

• Watt - The amount of electrical energy consumed per hour of operation. Watts do not tell you how bright the bulb is, but how efficient it is. Look for the highest lumens per watt.

Tel. 800-526-3694 • 732-363-4700 • Fax. 732-364-8110 • www.componenthardware.com© Copyright 2015, Component Hardware Group, Inc. 01/2015

Engineered for safety, performance, e�ciency and code compliance