YFL03E-230V-10W-PIR YFL03E-230V-20W-PIR

Model YFL03E-230V-10W-PIRMaterial : Aluminum Watt : 10WVoltage :220-240Vac 50/60HZ Lumen:900LMCCT:3000K~6500KSize : 131.4x190.8x57mmNet Weight :364gBeam Angle : 110°Detection angle: 120°��������� �������

Model YFL03E-230V-20W-PIRMaterial : Aluminum Watt : 20WVoltage :220-240Vac 50/60HZLumen:1700LMCCT:3000K~6500KSize : 184x232x55.5mmNet Weight :813gBeam Angle : 110°Detection angle: 120°��������� �������

Model YFL03E-230V-30W-PIRMaterial : Aluminum Watt : 30WVoltage :220-240Vac 50/60HZLumen:2700LMCCT:3000K~6500KSize : 214×278×58.3mmNet Weight :946gBeam Angle : 110°Detection angle: 120°��������� �������

Model YFL03E-230V-50W-PIRMaterial : Aluminum Watt : 50WVoltage :220-240Vac 50/60HZLumen:4100LMCCT:3000K~6500KSize : 231×309×59mmNet Weight : 1147gBeam Angle : 110°Detection angle: 120°��������� �������

User ManualLED infrared induction floodlight

YFL03E-230V-30W-PIR YFL03E-230V-50W-PIR

131.4mm

57mm

190.8mm

Polar Graph

0

-180

-150

-120

-90

-60

-30 30

60

90

120

150

0.0

79.7

159.4

239.1

318.7

398.4

Plane [50%Ang.] [10%Ang.]B0.0: 105.1 137.3B0.0: 105.1 137.3

Polar Graph

0

-180

-150

-120

-90

-60

-30 30

60

90

120

150

0.00.0

162.6

325.1

487.7

650.3

812.8

Plane [50%Ang.] [10%Ang.]B0.0: 115.7 142.6

Polar Graph

0

-180

-150

-120-120

-90

-60

-30 30

60

90

120

150

79.7

159.4

239.1

318.7

398.4

Plane [50%Ang.] [10%Ang.]B0.0: 105.1 137.3

0.0

Polar Graph

0

-180

-150

-120

-90

-60

30

60

90

120

150

0.00.00.0

330.8

661.5

992.3

1323.0

1653.8

Plane [50%Ang.] [10%Ang.]B0.0: 116.1 146.1

-30

0.0

0.5M0.5M0.5M0.5M

184mm

55.5mm

232mm

214mm

58.3mm

278mm

231mm

59mm

309mm

ispot seriesDelay SettingsDelay time : 10sec~10min ajustableKnob adjustable angle of 270 °When the light is on , product will reset delay time and keep the light on when detected new signal When the light just off, need a second time to recover the induction

Induction illumination settingsInduced enviroment illuminance range 10~2000LUXKnob adjustable angle of 270 °

Induction Distance SettingsInduction distance is 5~8 meters Knob adjustable angle of 270 °

TIME

LUX

SENS

Impotant User AdviceThis Product is Class I and must be Earthed.Always switch off mains supply before fitting.Replace any broken or damaged glass as soon as possible.Ensure all seals are intact and operational after fitting or maintenance.Do not touch the lamp in use or just after use as there is a risk of being burnt.Do not cover it with paper or cloth.Take off from flammable materials.Do not wash the lamp.Do not use the lamp where the ambient temperature is over 45°C.Keeping your eyes with a security distance,the light could cause damage.This product has no user serviceable parts.Clean with a damp cloth and dry with a lint free cloth or kitchen towel.

InstallationFind a suitable location to install this product.prepare the mains wiring.Use the mounting bracket to mark the hole centres for fixing.Drill holes suitable to accept wall plugs.Insert wall plugs.Ensure mounting bracket.Terminate wiring.Pay particular attention to any markings for Repalce all covers.Fit the floodlight to the mounting bracket with the screws,Check seals,gaskets and cable gland operation before testing the luminaire.Turn on power supply and test luminaire.

Important InfomationIt is recommend that luminaires installed and fitted by a qualifiedelectrican ensuring the installation complies to the current buildingregulations.these products are designed for connectionto a 100-240V~50/60Hz supply.Any broken or damaged parts should be replaced as soon as possible.YUSING will not accept responsibility for any claims arising from a poorinstallation.

Brown(L)

Direct Chassis(E)

Blue (N)

Live:Brown or Red

Earth:Green/Yellow

Neutral:Blue or Black

Wire connection guideThe brown wire is connected with the L wire of city electricity.The blue one is connected with the N wire of city electricity.The green/yellow one is connected with the earth wire.Power Cord type：H05RN-F 3 x 1.0mm2

Low sensitivity induction or doesn't workPlease check there is no barrier in front of the lampPlease check the induction signal source is in the sensing rangePlease check the installation height in the valid rangePlease check the working illumination sensor setting is consistent with the environmental illumination.When the environment temperature is close to body temperature, detection sensitivity will be decreased obviously, sometimes resulting in short-term failure

Can off loadPlease check whether there is a continuous induction signals in the sensing rangePlease check whether the longest time delay settingPlease check The installation environment whether have infrared interferencePlease check whether there is a moving object near the lamp

Diagram Showing

Fault and solution method

To move or placed, The product must face up To avoid damage to the sensor

√ ×