6”

248 WWW.MAXILUME.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333

Example: MC6SQ-LED-1200L-DIM10-120-30K-MC-6601-CL-WHTYPE 850 SERIES 1200 SERIES 2000 SERIES 3000 SERIES OPTICS CCT EMERGENCY TRIM TYPE REFLECTOR/ RING FINISHMC6SQ-LED o 850L-LUTH-120

o 850L-LUTH-277o 850L-DIM10-120 o 850L-DIM10-277

o 1200L-LUTH-120o 1200L-LUTH-277o 1200L-DIM10-120 o 1200L-DIM10-277

o 2000L-LUTH-120o 2000L-LUTH-277o 2000L-DIM10-120o 2000L-DIM10-277

o 3000L-LUTH-120o 3000L-LUTH-277 o 3000L-DIM10-120o 3000L-DIM10-277

o MD(Medium)

o 27Ko 30Ko 35Ko 40K

o EMG-LEDTypical lumen output of the fixture is up to 1000L in emergency mode. Contact the factory for details.

o MC-6601o MC-6607o MC-6614o MC-6615

o CL-WHo CL-SCHo SHZ-SHZo SHZ-WH

o W-WHo MB-WHo WT-WH

MC6SQ-LED 6” ARCHITECTURAL SQUARE LED DOWNLIGHT-LMH2 CREE MODULE

DESCRIPTION - 6” LED dedicated Architectural New Construction Square Downlight with integral LED heat management casting and driver (installed on junction box). Producing more than 1200 usable lumens. Lighting is smooth and comfortable while using 50% less energy than the common 32W CFL downlight. When used within specification, (Tc<65ºC; Ta=35ºC) lumen maintenance of 70% at 50,000hrs is expected for Fortimo module. With Energy Star and California Title-24 (compliances pending).

Height = 7-3/8”Trim Aperture = 6”Cut-out = 6-1/2”Trim Outside Dia. = 7-1/8”Width = 16”Length (Bar Hanger) =Max: 32” Min: 19-3/4”

A

B

C

D

G

H

PENDING

NEW

A

B

C

D

G

H

6” SQUARE HOUSING

INPUT VOLT. INPUT FREQ. INPUT CUR. THD POWER FACTOR INOUT POWER LUMENS

120/277 50/60Hz 275mA/119mA <20% >0.9 33W(+/-5%) 3000120/277 50/60Hz 191mA/83mA <20% >0.9 23W(+/-5%) 2000120/277 50/60Hz 125mA/54mA <20% >0.9 15W(+/-5%) 1250120/277 50/60Hz 91mA/39mA <20% >0.9 11W(+/-5%) 850

OPTICS - MAXILUME uses the CREE LMH2 module with its dome or flat lens options offering a wide range of light distributions for any application. MAXILUME Optilux techonolgy combines unmatched performance with visual comfort when matched with the CREE LMH2. Spun 0.05” thick reflector offers a 55 degree cutoff and smooth frost solite diffuser distributes light even throughout the workplace.

PERFORMANCE - Operating system delivers 850, 1250, 2000 & 3000 lumens with 90+ CRI and consistent white light within 3 MacAdams ellipses. Also available in four standard color options 2700K, 3000K, 3500K and 4000K. LED Cool Beam technology gives the added benefit of no heating of illuminated products. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared light. Guaranteed lumen maintenance of 70% at 50,000hrs and tested to LM-79 and LM-80 standards by an independent laboratory.

THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to the top of our reflector. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000hrs of operation.

DIMMABLE - The MAXILUME LED system is fully dimmable down to 1% of initial light output with a 0-10 Volt dimmer when ordered with the following options (DIM10-120, DIM10-277). Fixtures can be shipped with a Lutron Hi-lume A series Driver which can be dimmed with Lutron Dimming Systems when ordered with the following options (LUTH-120, LUTH-277). Consult Factory for details.

LED DRIVER/JUNCTION BOX - The LED driver is rated for 50 to 60Hz at 120V /277V input, produces less than 20%THD, and has a power factor between 90% and 100%

and is thermally protected for additional safety. The driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs.

MOUNTING FRAME - Our fixture is designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights. Flex is designed to attach into existing junction box.

MOUNTING BRACKET - Constructed from 16 gauge steel and is supplied with C-channel that are adjustable up to 28”. Mounting bracket maybe adjusted up to 2-3/4” vertically from inside the housing.

OUR WORD - The MAXILUME LED lighting system carries a five-year carefree warranty for parts and components. (Labor not included.)

LISTINGc-UL-us - listed for Damp location.c-UL-us - listed for feed Through Wiring.LM79 / LM80U.S. Patent Pending

DIMMING INFORMATIONDIM10 (0-10V Dimming)LUTH (Lutron® Hi-lume® Dimming)

IEC Standards• IEC 62471: Photobiological safety of lamps and lamp systems• IEC 62031: LED modules for general lighting – Safety Specifications

FEATURES - The CREE LMH2 System offers a wide array of features including; High color rendering up to 90+ CRI, Uniform Lambertian light distribution, Color stabilization within 3 MacAdam ellipses, Four color temperature options, Fully dimmable with zero flickering for all color temperatures, and an industry best smart dimming for 2700K option, plus much more. Energy savings of 45-70% over compact fluorescent lighting while providing similar light output.

3000

6” IN

CH

AR

CH

ITE

CT

UR

AL SQ

UA

RE

LED

DO

WN

LIGH

T W

/ CR

EE

LED

MO

DU

LE

A

BCD

H

G

6”

249Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information.

S H I P P I N G AVA I L A B L E 6”/4” LED SQUARE OPTICS

A = 3-1/8”B = 8”C = 4-5/8”

A = 3-1/8”B = 8”C = 4-5/8”

MC-6601-CL - 6”

REFLECTOR/ RING FINISH:CL-WH CL-SCH SHZ-WH WT-WHW-WH SHZ-SHZ MB-WH

CL WT MB SHZ W

MC-6607-CL - 6” MC-4607-CL - 4” WALL WASH REFLECTOR WITH LENS

REFLECTOR/ RING FINISH:CL-WH CL-SCH SHZ-WH WT-WHW-WH SHZ-SHZ MB-WH

A = 3-1/8”B = 8”C = 4-5/8”

MC-6615-CL - 6” MC-4615-CL - 4” REFLECTOR WITH TEMPERED GLASS LENS

REFLECTOR/ RING FINISH:CL-WH CL-SCH SHZ-WH WT-WHW-WH SHZ-SHZ MB-WH

CL WT MB SHZ W

A = 3-1/8”B = 8”C = 4-5/8”

MC-6614-CL - 6”

REFLECTOR/ RING FINISH:CL-WH CL-SCH SHZ-WH WT-WHW-WH SHZ-SHZ MB-WH

CL WT MB SHZ W

CL WT MB SHZ W

4” SQUARE TRIM

4” SQUARE TRIM

4” SQUARE TRIM

4” SQUARE TRIM

6” SQUARE TRIM

6” SQUARE TRIM

6” SQUARE TRIM

6” SQUARE TRIM

MC-4614-CL - 4” REFLECTOR WITH FROSTED GLASS LENS

MC-4601-CL - 4” REFLECTOR

A = 3-1/8”B = 5-3/4”C = 4-5/8”

A = 3-1/8”B = 5-3/4”C = 4-5/8”

A = 3-1/8”B = 5-3/4”C = 4-5/8”

A = 3-1/8”B = 5-3/4”C = 4-5/8”

4”

4”/6

” INC

H A

RC

HIT

EC

TU

RA

L SQU

AR

E LE

D D

OW

NLIG

HT

W/ C

RE

E LE

D M

OD

ULE