led decorative - lumecon.com · model width height depth weight lds-rof 17.5” 25.06” 15.9” 22...
TRANSCRIPT
Email: [email protected] Website: www.lumecon.com Phone: 248-477-5009Copyright © 2018 Lumecon LLC. All Rights Reserved. Note: Specifications and photometric data are subject to change at any time without notice.
Please see www.lumecon.com for current specifications and documentation
LDS-ROFLED Decorative
Description
Performance Data
Dimensions & Weights
Input Voltage: 120-277V or 347-480V
Light Distribution: LEDs are mounted to the inside of the fixture trim ring which serves as a heat sink to ensure optimal heat dissipation. This type of mounting allows for both Type 5 (standard) and Type 3 light distribution patterns to be offered.
Globe: Our two-piece acrylic lens post top features precise prisms achievable only through injection molding. The prisms provide pleasing daytime “prismatic sparkle’ and provide excellent uniformity, light distribution and efficiency for nighttime performance. The globe carries a 20 year warranty which includes resistance to yellowing as we define as having a yellowness index of less than 7.There are also two options for limiting uplight that is emitted from the fixture. The perforated light lid is a polished reflector above the LEDs that limits uplight to approximately 30% in the upper globe. The cutoff light lid is a solid polished reflector that virtually eliminates light to the upper globe.
Fitter/ Base: Fitter options are compatible with 8” or 9” globe neck sizes and are designed to slip fit 3” or 4” OD poles. *Fitter capabilities differ depending on the model selected.
Decorative Struts: Decorative struts require the use of a fitter/ base option.
Effective Projected Area (EPA): 1.40 ft²
Color Temperature: 2700K WW, 3000K OW, 4000K NW (standard), 5000K CW.
LED Lifetime: All LED’s are rated for a minimum of 100,000 hours of continuous operation at ambient temperatures from -40°F/-40°C to 95°F/35°C.
Color Rendering Index (CRI): Minimum of 80 or higher.
Dimming: 0-10V standard dimming capability.
Surge Protection: Thermally protected 20kA/ 40kV varistor type surge suppressor is included and meets ANSI C136.2-2015: Extreme Level. Also meets IEC61643-11 Class II / EN61643-11 Type 2, and US Dept of Energy MSSLC Model Spec for surge protection. The device is wired in series with the luminaire input power in order to interrupt power to the luminaire when consumed, protecting the LED power supply and circuit boards from additional electrical surges.
Lumecon ETD™ System: The enhanced thermal dissipation system engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards, UL, and IPC standards for flammability, moisture resistance and thermal shock.
Certification Data: ETL Listed to UL 1598, UL 8750 and CSA 22.2 No. 250 for Wet Locations. *Full compliance and test documentation is available for TM-21, LM-79, LM-80, ETL Listing to UL1598 and UL 8750.
DesignLights Consortium® (DLC) Qualified Product: LDS-ROF-1 and LDS-ROF-2 in NW are a DLC® Qualified product. Unless noted, not all versions of this product may be DLC® Qualified. For a complete list of Lumecon DLC® Qualified Products visit: www.designlights.org.
Manufacturing Origin: Built in Farmington Hills, MI with nearly all US parts and some foreign components.
Buy American: Meets “Buy American” Level 2 provisions for domestic content as described under Section 1605 of the 2009 American Recovery and Reinvestment Act.
Warranty: 10 Year L70 performance based warranty. For full warranty terms, please visit our website: www.lumecon.com
Technical Specifications
Model Width Height Depth WeightLDS-ROF 17.5” 25.06” 15.9” 22 lbs.
The LDS-ROF post-top fixture utilizes our patented thermal integrated trim ring for maximize heat dissipation. Available in multiple wattage and distribution versions, this fixture is able to replace existing 175W HID’s one-for-one. Each model delivers superior lumen output to illuminate your next downtown lighting project.
Model Watts Equiv DeliveredLumens Efficacy
LDS-ROF-1 (Type III)
32W 175W HID 3,173 Lm 99 LPW
LDS-ROF-2 (Type V)
57W 175W HID 5,763 Lm 101 LPW
Sheet/LROF_12192018
LDS-ROF (Standard)
LDS-ROF (Decorative build)
Email: [email protected] Website: www.lumecon.com Phone: 248-477-5009Copyright © 2018 Lumecon LLC. All Rights Reserved. Note: Specifications and photometric data are subject to change at any time without notice.
Please see www.lumecon.com for current specifications and documentation.
LDS-ROFLED Decorative
Ordering Information
LDS-ROF Options / Ordering Example: LDS-ROF-1-B-1-NW-N-CL-8-H
WATTAGE / DISTRIBUTION TYPE
1 - 32W / Type III2 - 57W / Type V
VOLTAGE
1 - 120v - 277v2 - 347v - 480v
PAINT COLOR
B - BlackCC - Custom Color**Will need RAL number
UPLIGHT LID
N - NoneP - PerforatedC - Cut-Off*
*Included on custom color top globe color orders
COLOR TEMPERATURE
CW - Cool (5000K)NW - Neutral (4000K)*OW - Warm (3000K) WW - Warm (2700K)
DLC® Qualified
PC1 - 120v/277v PCPC2 - 347v/480v PC*Requires a fitter/base
1 - 8” Fitter for 3“ OD Pole2 - 8” Fitter for 4“ OD Pole3 - 9” Fitter for 3“ OD Pole
DS - Decorative Struts*Requires a fitter/base
TOP GLOBE COLOR
CL - Clear B - Black*CC - Custom Color**Includes cutoff LiteLid
GLOBE NECK SIZE
8 - 8” Neck 9 - 9” Neck
Options & Accessories
Sheet/LROF_12192018
S - Spike FinialL - Fleur-De-Lis Finial
H - House Shield
Email: [email protected] Website: www.lumecon.com Phone: 248-477-5009Copyright © 2018 Lumecon LLC. All Rights Reserved. Note: Specifications and photometric data are subject to change at any time without notice.
Please see www.lumecon.com for current specifications and documentation.
LDS-ROFLED Decorative
Photometric Data
Photometric Illustration
For .ies files of this product, please visit the downloads tabs on the LDS-ROF product page: http://lumecon.com/products/lds-rof-ring-of-fire/
For .ies files of this product, please visit the downloads tabs on the LDS-ROF product page: http://lumecon.com/products/lds-rof-ring-of-fire/
LDS-ROF - 1 Distribution
LDS-ROF - 1 LDS-ROF - 2
LDS-ROF - 2 Distribution
Sheet/LROF_12192018
Email: [email protected] Website: www.lumecon.com Phone: 248-477-5009Copyright © 2018 Lumecon LLC. All Rights Reserved. Note: Specifications and photometric data are subject to change at any time without notice.
Please see www.lumecon.com for current specifications and documentation.
Performance Data
ELECTRICAL LOAD DATA
LUMEN MAINTENANCEData in the table below references projected performance in a 25°C ambient and is based on 10,000 hours of LED testing. Performance data has been tested per IESNA LM-80-08 and projected per IESNA TM-21-11.
Use the lumen maintenance factor that corresponds to the desired number of operating hours below to calculate LLF.
LDS-ROF - 1 700 32 0.30 0.17 0.15 0.13
LDS-ROF - 2 775 57 0.53 0.30 0.26 0.23
Fixture Model 120V 208V 240V 277VDrive Current(mA)
System Watts(W)
AC Current Load (A)
LWP-LA-60 1.0 0.95 0.91 0.88 0.84
LDS-ROF - 1 1.0 0.98 0.96 0.95 0.93
LDS-ROF - 2 1.0 0.96 0.92 0.90 0.86
Fixture Model 50,000 70,000 100,00025,0000
Lumen Maintenance Factors @ 25°C, by hours:
LDS-ROFLED Decorative
Sheet/LROF_12192018