lecture 2 introduction to electronics rabie a. ramadan [email protected]
TRANSCRIPT
![Page 1: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/1.jpg)
Lecture 2
Introduction to Electronics Introduction to Electronics
Rabie A. [email protected]
http://www.rabieramadan.org/classes/2014/electronics/
![Page 2: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/2.jpg)
2
Signal Amplification
• Introduce the most fundamental signal processing function employed in every electronic circuit
Signal Amplification
![Page 3: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/3.jpg)
3
Signal Amplification
• Transducers produce signals within a range of microvolt or millivolt
• signals are too small for reliable processing
• processing is much easier if the signal magnitude is made larger.
Detecting wirelessly signature
of a virus is impossible
![Page 4: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/4.jpg)
4
Signal Amplification
• Care must be exercised in the amplification of a signal, so that the information contained in the signal is not changed and no new information is introduced.
• when we feed the signal to an amplifier, we want the output signal of the amplifier to be an exact replica of that at the input, except of course for having larger magnitude.
• Any change in waveform is considered to be distortiondistortion and is obviously undesirable.
![Page 5: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/5.jpg)
5
Signal Amplification
• An amplifier that preserves the details of the signal waveform is characterized by the relationship
• where Vi, and Vo are the input and output Signals, respectively, and A is a constant representing the magnitude of amplification, known as amplifier gain.
• a linear relationship, hence the amplifier it describes is a linear amplifier.
![Page 6: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/6.jpg)
6
Signal Amplification
• The amplifiers discussed so far are primarily intended to operate on very small input signals.
• Their purpose is to make the signal magnitude larger and therefore are thought of as voltage amplifiers.
• The preamplifier in the home stereo system is an example of a voltage amplifier.
![Page 7: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/7.jpg)
7
power amplifier
• power amplifier : an amplifier may provide only a modest amount of voltage gain but substantial current gain.
![Page 8: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/8.jpg)
8
Amplifier Circuit Symbol
• This common terminal is used as a reference point and is called the circuit groundcircuit ground
![Page 9: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/9.jpg)
9
Voltage Gain
• A linear amplifier accepts an input signal Vi(t)and provides at the output, across a load resistance RL an output signal V0(t)
• magnified replica of Vi(t)
• The Voltage gain AVoltage gain Avv of the amplifier is defined by:
![Page 10: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/10.jpg)
10
Power Gain and Current Gain
• the Signal power. an Important feature that distinguishes an amplifier from a Transformer.
• Transformer : although the voltage delivered to the load could be greater than the voltage feeding the input side (the primary): – the power delivered to the load (from the secondary side of the
Transformer) is less than or at most equal to the power supplied by the Signal. source.
![Page 11: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/11.jpg)
11
Power Gain and Current Gain
• On the other hand. an amplifier provides the load With power greater than that obtained from the signal source.
• The power gain of the amplifier:The power gain of the amplifier:
![Page 12: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/12.jpg)
12
Semiconductors
![Page 13: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/13.jpg)
13
What you will learn
• The basic properties of semiconductors and in particular silicon which is the material used to make most of today's electronic circuits. '
• How doping a pure silicon crystal dramatically changes its electrical conductivity, which is the fundamental idea underlying the use of semiconductors In the implementation of electronic devices.
•
• The two mechanisms by which current flows in semiconductors: drift and diffusion of charge carriers.
• The structure and operation of the pn Junction; a basic semiconductor structure that Implements the diode and plays a dominant role in transistors.
![Page 14: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/14.jpg)
14
Semiconductors
• The most significant property of semiconductors is that:– their conductivity can be varied over a very wide range
through the introduction of controlled amounts of impurity atoms into the semiconductor crystal in a process called doping.doping.
![Page 15: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/15.jpg)
Categories of Solids
• There are three categories of solids, based on their conducting properties:
–conductors
–semiconductors
–insulators
15
![Page 16: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/16.jpg)
Electrical Resistivity and Conductivity of Selected Materials
at 293 Kelvin
16
![Page 17: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/17.jpg)
Reviewing the previous table reveals that:
17
• The electrical conductivity at room temperature is quite different for each of these three kinds of solids
– Metals and alloys have the highest conductivities
– followed by semiconductors
– and then by insulators
![Page 18: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/18.jpg)
18
Intrinsic Semiconductors
• Semiconductors are materials whose conductivity lies between that of conductors, such as copper , and insulators such as glass
• There are two kinds of semiconductors:
– single-element semiconductors, such as germanium and Silicon
![Page 19: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/19.jpg)
19
Intrinsic Semiconductors
• Compound semiconductors are useful in special electronic Circuit applications as well as in applications that involve light, such as Iight-emitting diodes (LEDs).
• Of the two elemental semiconductors, germanium was used in the fabrication of very early transistors (late 1940s, early 1950s).
• It was quickly supplanted, however, with silicon, on which today’s integrated-circuit (IC) technology is almost entirely based.
![Page 20: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/20.jpg)
Atomic Structure• Atoms go around the nucleolus in their orbits –
discrete distances • Each orbit has some energy level • The closer the orbit to the nucleus the less energy it
has • Group of orbits called shell• Electrons on the same shell have similar energy level• Valence shell is the outmost shell • Valence shell has valence electrons ready to be
freed • Number of electrons (Ne) on each shell (n)
– First shell has 2 electrons– Second shell has 8 electrons (not shown here)
Ne = 2n2
![Page 21: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/21.jpg)
Semiconductors • Remember the further away from the nucleus
the less energy is required to free the electrons • Germanium is less stable
– Less energy is required to make the electron to jump to the conduction band
• When atoms combine to form a solid, they arrange themselves in a symmetrical patterns
• Semiconductor atoms (silicon) form crystals• Intrinsic crystals have no impurities
![Page 22: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/22.jpg)
22
Intrinsic Semiconductors
• A silicon atom has four valence electrons, and thus it requires another four to complete its outermost shell.
• This is achieved by sharing one of its valence electrons with each of its four neighboring atoms
![Page 23: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/23.jpg)
Electronic Materials
A presentation of eSyst.org
• The goal of electronic materials is to generate and control the flow of an electrical current.
• Electronic materials include:1. Conductors: have low resistance which allows
electrical current flow2. Insulators: have high resistance which suppresses
electrical current flow3. Semiconductors: can allow or suppress electrical
current flow
![Page 24: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/24.jpg)
Conductors
A presentation of eSyst.org
• Good conductors have low resistance so electrons flow through them with ease.
• Best element conductors include:– Copper, silver, gold, aluminum, & nickel
• Alloys are also good conductors:– Brass & steel
• Good conductors can also be liquid:– Salt water
![Page 25: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/25.jpg)
Conductor Atomic Structure
A presentation of eSyst.org
• The atomic structure of good conductors usually includes only one electron in their outer shell. – It is called a valence electron. – It is easily striped from the
atom, producing current flow.
Copper Atom
![Page 26: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/26.jpg)
Insulators
A presentation of eSyst.org
• Insulators have a high resistance so current does not flow in them.
• Good insulators include:– Glass, ceramic, plastics, & wood
• Most insulators are compounds of several elements.
• The atoms are tightly bound to one another so electrons are difficult to strip away for current flow.
![Page 27: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/27.jpg)
Semiconductors
A presentation of eSyst.org
• Semiconductors are materials that essentially can be conditioned to act as good conductors, or good insulators, or any thing in between.
• Common elements such as carbon, silicon, and germanium are semiconductors.
• Silicon is the best and most widely used semiconductor.
![Page 28: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/28.jpg)
Semiconductor Valence Orbit
A presentation of eSyst.org
• The main characteristic of a semiconductor element is that it has four electrons in its outer or valence orbit.
![Page 29: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/29.jpg)
Crystal Lattice Structure
A presentation of eSyst.org
• The unique capability of semiconductor atoms is their ability to link together to form a physical structure called a crystal lattice.
• The atoms link together with one another sharing their outer electrons.
• These links are called covalent bonds.
2D Crystal Lattice Structure
![Page 30: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/30.jpg)
3D Crystal Lattice Structure
A presentation of eSyst.org
![Page 31: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/31.jpg)
Semiconductors can be Insulators
A presentation of eSyst.org
• If the material is pure semiconductor material like silicon, the crystal lattice structure forms an excellent insulator since all the atoms are bound to one another and are not free for current flow.
• Good insulating semiconductor material is referred to as intrinsic.
• Since the outer valence electrons of each atom are tightly bound together with one another, the electrons are difficult to dislodge for current flow.
• Silicon in this form is a great insulator.• Semiconductor material is often used as an insulator.
![Page 32: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/32.jpg)
Doping
A presentation of eSyst.org
• To make the semiconductor conduct electricity, other atoms called impurities must be added.
• “Impurities” are different elements. • This process is called doping.
![Page 33: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/33.jpg)
Semiconductors can be Conductors
A presentation of eSyst.org
• An impurity, or element like arsenic, has 5 valence electrons.
• Adding arsenic (doping) will allow four of the arsenic valence electrons to bond with the neighboring silicon atoms.
• The one electron left over for each arsenic atom becomes available to conduct current flow.
![Page 34: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/34.jpg)
Resistance Effects of Doping
A presentation of eSyst.org
• If you use lots of arsenic atoms for doping, there will be lots of extra electrons so the resistance of the material will be low and current will flow freely.
• If you use only a few boron atoms, there will be fewer free electrons so the resistance will be high and less current will flow.
• By controlling the doping amount, virtually any resistance can be achieved.
![Page 35: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/35.jpg)
Another Way to Dope
A presentation of eSyst.org
• You can also dope a semiconductor material with an atom such as boron that has only 3 valence electrons.
• The 3 electrons in the outer orbit do form covalent bonds with its neighboring semiconductor atoms as before. But one electron is missing from the bond.
• This place where a fourth electron should be is referred to as a hole. • The hole assumes a positive charge so it can attract electrons from
some other source.• Holes become a type of current carrier like the electron to support
current flow.
![Page 36: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/36.jpg)
Types of Semiconductor Materials
A presentation of eSyst.org
• The silicon doped with extra electrons is called an “N type” semiconductor. – “N” is for negative, which is the charge of an
electron.
• Silicon doped with material missing electrons that produce locations called holes is called “P type” semiconductor. – “P” is for positive, which is the charge of a hole.
![Page 37: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/37.jpg)
Current Flow in N-type Semiconductors
A presentation of eSyst.org
• The DC voltage source has a positive terminal that attracts the free electrons in the semiconductor and pulls them away from their atoms leaving the atoms charged positively.
• Electrons from the negative terminal of the supply enter the semiconductor material and are attracted by the positive charge of the atoms missing one of their electrons.
• Current (electrons) flows from the positive terminal to the negative terminal.
![Page 38: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/38.jpg)
Current Flow in P-type Semiconductors
A presentation of eSyst.org
• Electrons from the negative supply terminal are attracted to the positive holes and fill them.
• The positive terminal of the supply pulls the electrons from the holes leaving the holes to attract more electrons.
• Current (electrons) flows from the negative terminal to the positive terminal.
• Inside the semiconductor current flow is actually by the movement of the holes from positive to negative.
![Page 39: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/39.jpg)
In Summary
A presentation of eSyst.org
• In its pure state, semiconductor material is an excellent insulator.• The commonly used semiconductor material is silicon.• Semiconductor materials can be doped with other atoms to add
or subtract electrons.• An N-type semiconductor material has extra electrons.• A P-type semiconductor material has a shortage of electrons with
vacancies called holes.• The heavier the doping, the greater the conductivity or the lower
the resistance.• By controlling the doping of silicon the semiconductor material
can be made as conductive as desired.
![Page 40: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/40.jpg)
40
Recombination Process
• Thermal generation results in free electrons and holes in equal numbers and hence equal concentrations, where concentration refers to the number of charge carriers per unit volume(cm 3).
• The free electrons and holes move randomly through the silicon crystal structure, and in the process some electrons may fill some of the holes.
• This process, called recombination ,results in the disappearance of free electrons and holes.
![Page 41: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/41.jpg)
41
Recombination Process
• In thermal equilibrium, the recombination rate is equal to the generation rate, and one can conclude that the concentration of free electrons n is equal to the concentration of holes p.
• where denotes the number of free electrons and holes in a unit volume (cm 3 ) of intrinsic silicon at a given temperature.
![Page 42: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/42.jpg)
42
Recombination Process
• Results from semiconductor physics gives ni a
![Page 43: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/43.jpg)
43
Example
![Page 44: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/44.jpg)
44
hole and free- electron concentration
• Finally, it is useful for future purposes to express the product of the hole and free- electron concentration as :
![Page 45: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/45.jpg)
45
Doped Semiconductors
• Concentrations are far too small for silicon to conduct appreciable current at room temperature.
• Also, the carrier concentrations and hence the conductivity are strong functions of temperature,
• Not a desirable property in an electronic device.
• Fortunately, a method was developed to change the carrier concentration in a semiconductor crystal substantially and in a precisely controlled manner.
• This process is known as doping, and the resulting silicon is referred to as doped silicon
![Page 46: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/46.jpg)
46
Doped Semiconductors
• Doping involves introducing impurity atoms into the silicon crystal in sufficient numbers to substantially increase the concentration of either free electrons or holes but with little or no change in the crystal properties of silicon.
• To increase the concentration of free electrons, n , silicon is doped with an element with a valence of 5, such as phosphorus. – The resulting doped silicon is then said to be of n type
• . To increase the concentration of holes, p , silicon is doped with an element having a valence of 3, such as boron, – the resulting doped silicon is said to be of p type
![Page 47: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/47.jpg)
47
n Type
• A silicon crystal doped with phosphorus impurity. The dopant (phosphorus) atoms replace some of the silicon atoms in the crystal structure.
• Since the phosphorus atom has five electrons in its outer shell, four of these electrons form covalent bonds with the neighboring atoms, and the fifth electron becomes a free electron.
• Thus each phosphorus atom donates a free electron to the silicon crystal, and the phosphorus impurity is called a donor
• . It should be clear, though, that no holes are generated by this process.
• The positive charge associated with the phosphorus atom is a bound charge that does not move through the crystal
![Page 48: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/48.jpg)
48
n Type
![Page 49: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/49.jpg)
49
P Type
• To obtain p -type silicon in which holes are the majority charge carriers, a trivalent impurity such as boron is used.
• a silicon crystal doped with boron.
• Note that the boron atoms replace some of the silicon atoms in the silicon crystal structure.
![Page 50: Lecture 2 Introduction to Electronics Rabie A. Ramadan rabieramadan@gmail.com](https://reader034.vdocuments.site/reader034/viewer/2022042616/56649eb05503460f94bb6460/html5/thumbnails/50.jpg)
50
P type