learn & master - hp quality center certification exam code hpo-m15...

Learn & Master - HP Quality Center

Certification Exam Code HPO-M15

>>>>>>>>>>>>>>>>>>>>>> www.softwaretestinggenius.com <<<<<<<<<<<<<<<<<<<<<<

Chapters Being Covered

Chapter - 1: Introduction to HP Quality Center.

Chapter - 2: Release Management Module.

Chapter - 3: Test Plan Module.

Chapter - 4: Test Lab Module.

Chapter - 5: Defect Management Module.

Chapter - 6: Reports Module.


HP Quality Center - Introduction

HP Quality Center is a test management tool.

It offers an organized framework for testing applications.

It is a web based application which manages all aspects of testing process which otherwise is a time consuming activity.

It helps maintain a project database of tests that cover all aspects of application functionality.


It can be attached to our email system so that the information about the defect can be supplied to all people concerned. For example Developers, persons in customer support and quality assurance personnel.

This can be integrated with automated tools like Winrunner, QTP, Load runner so that we can get a fully automated application testing.

Graphs and reports can be generated to analyze the information.


HP Quality Center - Introduction

Why Quality Center

• One stop shop for all testing related tasks.

• Coherence of different tasks.

• Better analysis and management.

• Easier to track


Test Management Process

Specify Requirements

Plan/Create Tests

Execute Tests

Track defects

Analysis

Report and Graph Generation


Quality Center Modules

The quality center has following basic modules.

Releases Requirements Test Plan Test Lab Defects

Additional modules

Business components Dash board


Quality Center Add- ins

At times Quality center responds slow due to the client server nature of application. The response depends on many parameters like network configurations, geographical locations of testing team, load on system etc.

To overcome the network problems test wares can be first created in Microsoft word or Excel and then uploaded in QC.

To upload MS word document QC needs Microsoft word add-in

To upload Excel document QC needs Microsoft Excel add-in

To connect to QTP, needs QTP Add-in.


Chapter - 2:

HP Quality Center

Release Management Module


HP Quality Center – Release Management

The application testing process begins by defining a release tree in Releases module. Here is the release management work flow.

Assign Defects

Define Releases and Cycles

Assign Requirements

Assign and run Test sets

Analyze Releases and Cycles


The foundation of the release module is the Release Tree.

Release Tree enables the modeling of the upcoming releases within a hierarchical tree structure.

A project manager starts by defining a release folder along with its releases. A release represents a group of changes in one or more applications that will be available for distribution at the same time.

After defining the release, a QA manager defines cycles. A cycle is a set of development and quality assurance efforts performed to achieve a common goal based on the release timeline.

Defining Releases and Cycles


For example, suppose you are defining upcoming releases for the sample Mercury Tours application. The Mercury Tours Application folder contains Release 10.5. This release includes four cycles. You might define the releases and cycles in the releases tree as follows:



QA manager also can assign Start date and End date for each cycle.



Assigning Requirements

After defining the releases and cycles, the QA manager assigns the Requirements from requirement module to Releases and Cycles.


Enter the details of Target Cycle and Target Release.

Assigning Requirements


Assigning and Running Tests

Once requirements are assigned, Each Test set folder from

Test Lab module is assigned to each cycle.


Once Test set folders are assigned to cycles, Test sets

are run under these folders.

Assigning and Running Tests


If an application flaw is detected while running a test set, the QA

engineer can submit a defect. Quality Center automatically creates

a link between the test run, associated release and cycle, and the

new defect.

Assigning Defects


• Following test runs, the QA manager reviews the test progress to determine how well it meets the release goals.

• The QA manager can also determine how many defects were resolved, and how many still remain open. The results can be analyzed at a release or at a cycle level.

• It also helps track the progress of the testing process in real time by analyzing the releases tree and ensuring that it matches the release goals.

Analyzing Releases and Cycles


Chapter - 3:

HP Quality Center

Test Plan Module


What is Test Plan module?

Test Plan Tree structure

Designing Tests

Parameters

Export / Import Test case


Topics Being covered

Quality Center - Test Plan

Test Plan It is a repository of test cases. Can be accessed through the Test

Plan section in the Quality Center

Uses Subject (Root)-Folders-Test

Model

Folder or Test name can be

# Module name

# Scenario name

# Functionality name

Test Plan starts after requirements

are baselined


Developing a Test Plan consists of the following Steps:

Quality Center - Test Plan


Test Plan Module

Key elements in the Test Plan Module are

Developing a Test Plan Tree

Designing Tests

Designing Test Steps

Using parameters in tests

Calling Tests

Creating and Viewing Requirements Coverage

Monitoring the status of test plans


Developing a Test Plan Tree

To Create a Test plan Tree:

Go to Tests>New Folder

On New Folder dialog provide the required Folder name


Designing Tests

Adding a test to the subject folder.

Available test type:

Manual Business Process WR_Automated LR_Scenario VAPI_XP Test System Test Alt_Scenario Quick Test_Test (Need QTP add-in)


MANUAL:A Quality Center manual test.

WR-AUTOMATED: A test that is executed by WinRunner, HP's functional testing tool for Microsoft Windows applications.

LR-SCENARIO: A scenario that is executed by LoadRunner, HP's load testing tool.

QUICKTEST_TEST: A test that is executed by QuickTest Professional,

HP's functional enterprise testing tool. This test type is only available if you have installed the appropriate add-in from the HP Quality Center Add-ins page.


Designing Tests

VAPI-XP-TEST: A test that is created using Visual API-XP, the Quality Center open test architecture API testing tool.

SYSTEM-TEST: A test that instructs Quality Center to provide system information, capture a desktop image, or restart a machine.

BUSINESS-PROCESS: A business process test.


Designing Tests

The new test is added to the test plan tree under subject folder

Add a test Description.

In the Details tab, you can see the test name, test designer, creation date, test status, and other information.


Designing Tests


Designing Test Steps:

Goto Design Steps tab of created Test

Click the Design Steps tab.

Click the New Step button. The Design Step Editor opens


Define a step for displaying Yahoo login page Step Name: Display yahoo Login Page. Description: Launch a browser and enter URL as Yahoomail.com. Expected Result: Yahoo Login Page should be shown. Click OK



To create an another step click on New Step icon Define a step for displaying Yahoo login(Example) page

Step Name: User Name & Password. Description: Enter User Name and Password.

Click Login. Expected Result: User must Log on. Click OK

Repeat the same to add more number of steps.



Exporting Excel Data to Quality Center Select all the rows in the Excel sheet that are to be exported

Open the Excel sheet and click on “Tools->Export to Quality Center”


Select the domain and the Project Code

Login with User ID

Select the tab

Exporting Excel Data to Quality Center


Select a Map

An existing map can be selected or a new map can be created

This maps each field on the excel sheet with a corresponding field in the Quality Center



List Box on the left contains on the fields that are required for logging defects. Fields in ‘Red’ color are the mandatory fields. These fields are set up by the admin.

A field is selected from the left list box and added to the right list box. Against this field then the field name from the excel sheet is entered.

Mapped

fields


Creating

Mapping


The fields are mapped.



Defect is successfully uploaded

Defect loaded in QC



Copying Test Steps

Display the Design Steps tab for yahoo_Login(Example) Click the Design Steps tab. Select the steps that you want to copy. Copy the selected steps. Paste the steps into the Yahoo_Search test(Example)


Adding Parameters to test

Display the Design Steps tab for Yahoo_Login Step 1:Launch a browser and enter URL. In that highlight the word

URL and click on Insert Parameter icon. It opens Parameter properties dialog.

Enter URL in the Parameter Name. Click OK.

Displays the parameter as below:

Repeat the same for Username and Password. Parameters in the test looks as below:


Calling Tests

Calling a Test

We can call an existing test to a current test

It is useful if you have common steps that you often want to perform as parts of other tests.

Click on Call to Test button. Select a required existing test


Requirements Coverage

In the Test Plan module, you create requirements coverage by

selecting requirements to link to a test. Alternatively, in the

Requirements module, you create tests coverage by selecting tests to

link to a requirement. A test can cover more than one requirement, and a

requirement can be covered by more than one test.


Linking Requirements to a Test

Display the Yahoo_Search test. Display the Req Coverage tab. Display the requirements tree.

Click the Select Req button and expand the requirements tree displayed on the right.

Add the Child1 requirement to the coverage grid. Hide the requirements tree. Click the Close button.


Chapter - 4:

HP Quality Center

Test Lab Module



Introduction Creating Test Sets Executing Test Sets Analyzing Results Linking Activities


Test Lab module is used to run the test cases.

The Test run process begins with creating the Test Set Tree and running the tests.

Initially a Test Set Folder is created.

Depending on the testing goals you can add Tests to the Test Folder.

Test sets can contain both manual and automated Test.

We can include the same Test in different Test Sets or add a few Test instances to the same Test Set.

We can schedule date and time for the execution of Test Sets.

Test Lab


Process Flow


Create a Test Set

Select the Test Lab module

Click on Create Folder icon at the left corner of the module and give the name for the folder.

Select the created folder and click on create test set to create a set and give name and description for the test set.

A New Test Set is created.

Select the Test set created.

In the ‘Test set properties’


Test Set Properties Window: The ‘Details’ tab enables to give the estimated open date of test

and estimated close date of test set.

In the ‘attachments’ tab we can add an attachment to the test set. Attachment can be a file, URL, snapshot of application, and item from the clip board or system information.

Create a Test Set


‘On failure’ tab enables to set the conditions if any of the automation test fails. Conditions are like stop the test set, repeat the failed test or rerun the test set or do nothing.

‘Notifications’ tab enables send notifications to an user if any of the test is finished with failed status, or failed due to some network issues, or execution of test set is finished.

Create a Test Set


Execution Grid Window:In the execution grid we can select the tests to be executed from test plan. Tests can be either manual tests or automation tests.

Adding tests to test set•Select the a Test Set•Click on ‘Select tests’ icon at the top corner of the set.•Drag and drop the tests from test plan tree displayed at right corner.

Create a Test Set


• If it is a manual test and that test is having some parameters, parameters of the test window will open while dragging the test. Parameters should be given when we execute the scripts. So we can just close ‘parameters of the test’ window, with out giving any parameters.

Create a Test Set


• We can add any number of instances of a test in single test set.

• Drag all required tests in a flow.

Create a Test Set


The default status of all the tests in test set will be ‘No Run’.

Create a Test Set


Specify the Execution Flow: The execution flow tab gives the Order and flow of execution of tests. you can specify a test to run on a specific date and time or based on

a condition. Condition would be a test run will start only when a test is passed or

finished.

Create a Test Set


To specify a date constrain double click on the test, in the ‘Run Schedule’ dialog box select time dependency tab and specify a date and time, click ‘OK’.

Create a Test Set


Now we can see a time clock is shown in execution flow to signify a particular test is scheduled.

Create a Test Set


• To specify a condition double click a test, select the execution condition tab in ‘Run Schedule’ window.

• Click on ‘New’ Button to create a condition.

Create a Test Set


• Now we can observe the flow of test is changed.• Now the notification will be sent to the assigned tester to

start testing of specified test on the scheduled day and time.• The second can not be executed unless the previous test is

finished, because we did set condition in previous steps.

Select the ‘Test’ and ‘Condition’, click on ‘OK’ icon.

Create a Test Set


Test Run can be in two ways:• Manual Run• Automatic

Manual Run: To execute a manual test. Automatic: To execute automation script (s).

Running The Tests


Executing Manual Tests: Select a manual test in the set. Click on Icon to start the execution.

Running The Tests


• Select the tester that who is executing the current test. By default it will be current username of QC.

• If you want you can rename the ‘Run Name’• Then click on ‘Begin Run’ Icon.

• When run begins it will ask for the parameter values if you have any parameters while creating the tests in test plan.

• Give the parameter values and click on ‘OK’ Button.

Running The Tests


• Once execution begins the steps are shown with default status ‘No Run’.

• Click on ‘Compact View’ icon to see the description, expected values and to add Actual results.

• You can view the expected result, but can not modify.

Running The Tests


• Execute all the steps and enter actual results for all the steps.

• Click on Compact View icon again, to come back to steps grid.

Running The Tests


Now change the status of all the steps based on actual result.

Click on ‘End Run’ icon to close the execution

Running The Tests


After the execution:

Running The Tests


• Automation scripts can be executed as a set or can be executed as individual.

• To execute as a test click on ‘Run test set’ Icon.

• Executing Automated Scripts:

Running The Tests


• To execute the script on a Remote machine, enter the remote machine name in ‘Run on Host’ column.

• To execute locally select the option ‘Run All Tests Locally’.• Execute all the tests one by one, click in Click on ‘Run All’.• To Execute Individually select a test to be executed and click in Run.• It will launch the tool and will execute the script.

Running The Tests


Once the execution is completed , an email will be sent to the specified user. if the notification has been selected in test set properties window.

Running The Tests


• Double click a test in the test set to open Test instance properties window.

• Select the run name and click on ‘Launch report’ icon.• It will launch the Quick test report for that particular instance.

Viewing Results


• Click on the ‘Linked defects’ icon.

Linking Defects


To create and link a new defect click ‘Add and link defect’ icon.

It will open defects module, create a defect and save it. Created defect will be linked automatically to the test instance.

Linking Defects


To link an existing defect click on ‘link an existing defect’ icon. Link can be done in two ways.

By defect ID By select the defect from defects module.

Default is by defect ID.

Give the defect ID and click on ‘Link’ icon.

Linking Defects


Configuration tab enables to enter the parameters for manual tests and Automated tests.

It also enables to set a test to run how many number iterations if a test fails.

Adding Parameters


Chapter - 5:

HP Quality Center

Defect Management


Defect Management using QC

Locating and repairing defects is an essential phase in testing. Analyzing defects and issues is what helps managers make the “go/no-go” decision about application deployment. Quality Center helps tracking application defects and enabling you to monitor defects closely from initial detection until resolution.

Defects gives a snapshot of the application under test and tell exactly how many defects you currently have, their status, severity, priority, age, etc.


Defect Management using QC

The following things can be done in the defects module of Quality Center: Tracking defects (stages) Adding Defects Reviewing Defects Matching Defects Updating Defects Mailing Defects Linking Defects Filtering/Sorting Defects Creating/Viewing Favorite views


Tracking defects

When you submit a defect to a Quality Center project, it is tracked through these stages: New, Open, Fixed and Closed. A defect may also be Rejected or it may be Reopened after it is fixed.

When you initially report the status of the defect is New by default.


The Defects Toolbar


New Defect entry

Selecting “New Defect” button in Defect section creates a new bug. All fields marked by (*) or in red are required.

Description should have steps to recreate and test data.

Attachments and screenshots can be added.

Defect is submitted for tracking.


Reviewing open defects

Various ways to search defects in Quality center (using columns, search, or favorites).

Double click activity to review in detail, change status, or add comments.


Matching Defects

Matching defects enables you to eliminate duplicate or similar defects in your project. Each time you add a new defect, QC stores lists of keywords from the Summary and Description fields. When you search for similar defects, keywords in these fields are matched against other defects.

This filter can be set on the defects by using the "Find similar defects" button.

The results are stored in the similar defects dialog box, sorted by the percentage of detected similarity.


Updating Defect in Quality Center

When a defect needs updated go to Defect Details page.

Change appropriate fields.

Add comments.

Save by selecting OK.


Mailing Defects

On the Defect Details page click on the send email button.

Send email dialog opens. Enter valid To address, Add comments and click on Send button to send email.

You can also include the attachments and history of that particular defect..


Linking Defects

• A Defect can be linked directly or indirectly to an entity.

• When you add a defect from a test step a QC adds direct link to the step and indirect link to its run, test instance and requirement if the case is covered by the requirement.


Filter / Sort Defects

In the Defect module you can set filter to view defects with some condition. For ex: Defects detected by an user.

Click on the Set Filter/sort button

The Filter dialog opens. Select the Detected By field and click on the browse button.


Filter / Sort Defects

The filter condition dialog opens with list of all users in the QC. Select the username and click ok to apply the filter condition. Similarly you can select status as “Not closed”. Defects grid displays defects detected by selected user and whose status is Not closed (lists all defect status other than closed).


Creating Favorite views for defects

On the Defects module, select “Add favorite” from the Favorites Menu (available in the Header links).

In the Name field type “My detected defects” (for the above filtered defects).

This favorites can be added to public or private folder. Views in public folder is accessible by all users. Views in private can be accessed by the person who created them.

Select private for your defects list and click on OK to add the view name to the Favorite list.


Viewing Favorite views for defects

On the Defects module, select the list saved as favorites from the “Favorite” dropdown. The defects detected by you with status other than closed will be displayed.


Chapter - 6:

HP Quality Center

Reports


Introduction

Available Reports and Sub Reports

Generating Reports

Customizing Reports

Document generator

Excel Reports



Generating Reports

Generating Reports

Quality Center reports can be generated from each Quality Center module.

Report generation can be done through “Analysis” menu


Generating Reports

About Generating Reports

You can generate reports at any time during the testing process.

Reports can be generated from the Requirements, Test Plan,

Test Lab, and Defects modules. You can display reports

using their default settings, or you can customize them.

You can save the settings of your reports as favorite views and reload them as needed. You can also save your reports as text files or HTML documents. In addition, you can export report data to Microsoft Excel.

You can further customize the report by adding sub-reports.


Requirement module reports


The following reports are available with Requirement module reports

Report Description Standard Requirements: Lists the requirements that appear in the requirements tree.

Tabular: Displays the requirements that appear in the requirements tree in a grid format.

Requirements with Coverage Tests Lists the requirements that appear in the requirements tree with their tests coverage information.




Requirements with Coverage Tests and Steps Lists the requirements that appear in the requirements tree with their tests coverage information. It also displays the test steps for each tests coverage.

Requirements with Linked Defects Lists the requirements that appear in the requirements tree with their linked defects.

Requirements with Traceability Lists the requirements that appear in the requirements tree with their associated traced to and traced from requirements.


Test plan module reports

Test plan module reports

Standard Test Planning Lists the tests in the test plan tree.

Subject Tree Lists the tests in the test plan tree by subject.

Tests with Design Steps Lists the tests that appear in the test plan tree, including their design steps.

Tests with Covered Requirements Lists the tests that appear in the test plan tree with their requirements coverage information.

Tests with Linked Defects Lists the tests that appear in the test plan tree with their linked defects. Test plan module reports


Test Lab Module Reports

Test Lab Module Reports:

Current Test Set Lists the tests that appear in the current test set.

Cross Test Set Lists the test sets that appear in the Test Sets list, without listing their tests.

Test Set Hierarchy with Tests Lists the test sets hierarchically, as well as the status of each of the test sets.

Cross Test Set with Tests Lists the test sets that appear in the Test Sets list, including their tests.


Test Lab Module Reports

Test Lab Module Reports:

Current Test Set with Failed Test Runs Lists tests from the current test set, with "Failed" test run status.

Cross Test Set with Failed Test Runs Lists tests from all test sets, with "failed" test run status

Execution Notification Lists the tests that are displayed in the current test set with the results of their last test run.


Defects Module Reports

Defects Module Reports:

Standard Defects Lists the defects that appear in the project.

Tabular Defects Displays the defects that appear in the project in a grid format.

Defects with Linked Tests and Runs Lists the defects with their linked tests and test run results.

Fixed or Rejected Defects Lists defects with "fixed" or "rejected" status.


Defects Module Reports

Defects Module Reports:

Fixed or Rejected Defects Detected by Current User Lists defects with "fixed" or "rejected" status that were detected by the current user.

Opened Defects Assigned to Current User List defects with "open" status that are assigned to the current user.


Available Sub Reports

Each report can contain sub-reports. In addition, sub-reports themselves might contain other sub-reports. The sub-reports available depend on the type of the parent report.

The following sub-reports are available:

Contained Tests Lists the tests in a test set. Coverage Requirements Lists information for requirements that cover a

test. Design Steps Lists the design steps for a test. Linked Defects Lists the defects that are linked to a record. Linked Entities List all entities that are linked to a defect. Parent Test Lists the parent test of a test.


Related Defects Lists related defects for each subject in a test plan tree

Related Requirements Lists the requirements that are linked to a defect

Contained Tests Lists the tests in a test set.

Coverage Requirements Lists information for requirements that cover a test.

Design Steps Lists the design steps for a test.

Linked Defects Lists the defects that are linked to a record.



Linked Entities List all entities that are linked to a defect.

Parent Test Lists the parent test of a test.

Related Defects Lists related defects for each subject in a test plan tree.

Related Requirements Lists the requirements that are linked to a defect.

Requirements Coverage Lists the tests that cover a requirement.

Run Steps Lists the run steps for a test run.

Runs Lists all runs of a test.



Creating Reports

Creating Reports:

You can create a report from the Requirements, Test Plan, Test Lab, and Defects modules. Depending on the current module, you have different report options. You can use the default report or customize it to meet your needs.


Creating Reports

To create a report:

Select the Quality Center module from which you want to create a report.

Choose Analysis > Reports, and select the type of report you want to create


You can click the First Page button to display the first page of the report, or

the Previous Page button to display the preceding page

You can click the Next Page button to display the subsequent page of the

report, or the Last Page button to display the final page.

To customize your report, click the Configure Report and Sub-Reports button.

To regenerate the report so that it displays the most up-to-date data,

click the Generate report button.

To print your report, click the Print arrow and choose Current Page or

All Pages. The Print dialog box opens. Change the printer settings if

necessary. Click Print.

Creating Reports


To save your report, click the Save arrow and choose Current Page or AllPages. The Save Web Page dialog box opens. Change the file name ifnecessary. To save the report in its original format, select Web Page,complete in the Save as type list. To save it as a text file, select Text File andclick Save.

To export the report data to Microsoft Excel, right-click the report andchoose Export to Microsoft Excel. Excel must be installed on your machineto export report data to Excel.

Creating Reports


To save the settings of your report as a favorite view, click the Add toFavorites button. For more information, see Chapter 6, “Working withFavorite Views.”

Click Close to close the report and return to the current Quality Centermodule.

Creating Reports


Creating Quick Reports You can create a quick report for

specific records. In addition, in the Requirements module you can create a quick report for a requirement and its children.

Note: You cannot view a quick report for multiple nodes in the test plan tree.

Creating Quick Reports


To create a quick report:

Select the requirements, tests, or defects for which you want to create a report. To create a report for more than one record, press the Ctrl key and select the records for which you want to create a report.



Create the report using one of the following options:

To create a report for the selected records, choose Analysis > Report Selected. Alternatively, right-click the records and choose Report Selected. The report opens with data for the selected records displayed.

In the Requirements module, to create a quick report for a requirement and its children, choose Analysis > Report Selected with Children. Alternatively, right-click the requirement and choose Report Selected with Children. The report opens with data for the selected requirement and its



To customize a report:

Select the Quality Center module from which you want to generate a report.

Choose Analysis > Reports and select the report you want to customize. The report opens with default data displayed.

Click the Configure Report and Sub-Reports button to customize your report. The Report Configuration page opens with the default options displayed.

Customizing Reports


In the Reports list, select a main report or a sub-report. The Report Configuration pane displays the available options.

Under Page, you can set the number of items per display page (available for the main report):

To limit the number of items per page, select Limit items per page to and specify the number of items per page. To display all items in one page, select All items in one page.

Under Template, you can use the Quality Center default report template or your own template. (This option is available for the main report only.)

Customizing Reports


Under Filter, you can define or clear filters and sorting priorities: Click the Set Filter/Sort button to filter and sort your data according to criteria you choose.

Click the Clear Filter/Sort button to clear all the filters and sortingpriorities.

Select All Fields (auto-layout) to display all fields in the report.

Select Custom Fields (layout), and click the Select Fields button to choosethe fields and set their order.

You can also select the following options. Note that not all options areavailable in all modules.

Customizing Reports


Grid View Displays the report as a grid.

Attachments Displays a list of associated attachments.

History Displays a list of all the changes made to a requirement, test, or defect.

Keep Parent-Child Order Displays the requirement topic with the child requirement below it. Selecting this option disables your defined filters and sorting priorities.

Customizing Reports


Show Paragraph Number Displays the assigned hierarchical numbers

to each requirement in the tree. Note that the numbers are not related

to the unique Req ID assigned to each requirement.

Rich Text Includes rich text for the requirements in the report.

Show Full Coverage Displays the tests coverage for each requirement

To add a sub-report, click the Add Sub-Report button. In the Type list, select

a sub-report type and click OK. The sub-report is added to the Reports list.

To delete a sub-report, select the sub-report and click the Delete Sub-Report button.

Click the Apply button to generate a new report.

Customizing Reports


Document Generator

The Quality Center Document Generator enables you to create a Microsoft Word document containing a project's requirements, planning, test list, test set folders, and defect tracking data.

Note: The Document Generator can only be run if Microsoft Word has been enabled to run macros.

You can create the document by performing the following tasks:

# Set document format.# Specify document content.# Generate and edit the document.


Document Settings:

Select a check box in the

Document Generator tree.

Following information's

can be given.

But not mandatory.

Title Name Author Mail Description

Document Generator


Options:

Document Generator


Customization:

For page setup

Document Generator


Logo:

Document Generator


Generated Document:

Example

Document Generator


Excel Reports

Excel Reports:

New Feature in 9.2 version.

Enables user to export QC data to Microsoft Excel

Export the data to Excel by defining SQL queries on the Quality Center project database. After the data has been exported, you can also run a Visual Basic script on the data within Excel to process and analyze the data. This feature provides you with increased flexibility when analyzing Quality Center data.


Launching The Excel Report Generator

Goto Tools>Excel Reports

The Excel Report Generator consists of the following key elements:

Excel Reports toolbar. Contains buttons for commands commonly used when creating and modifying Excel reports.

Excel Reports tree. Located in the left pane, displaying available reports for the project.

General tab. Contains basic data about a report.

Excel Reports


Query tab. Enables you to define and test SQL queries that extract data from the Quality Center project database to Excel

Post-processing tab. Enables you to define a Visual Basic script to run in Excel after report data has been exported.

Generation Settings tab. Enables you to define settings for generating a report.

Public. Reports in this folder are available to all users of the project.

Private. Reports in this folder are available only to the user who created them.

Excel Reports


Creating Excel Reports

Add the report to the Excel Reports tree Define which data to include in the report

through SQL query Generate the report

Adding Reports:

Click the Tools button on the upper-right of the Quality Center window,and select Excel Report Generator. The Excel Report Generator opens.

In the Excel Reports tree select the required public or private folder

Excel Reports


Thank You


learn & master - hp quality center certification exam code hpo-m15...

Documents

release module

quality center modules

release tree

quality centerone

releases module

release timeline

release folder

insat times quality