leading industry. leading innovation.toga.co.za/assets/toga-engineering-company-profile.pdf ·...
TRANSCRIPT
LEADING INDUSTRY. LEADING INNOVATION.
Toga Engineering specialises in electrical and mechanical engineering,
we pride ourselves on quality, innovation and excellent service. We
design, implement and manage your project in a safe and cost
effective way that utilises the most up to date technologies and
methods to ensure client satisfaction.
Toga Engineering is a ISO 9001:2008 accredited company insuring we
deliver a quality service to our clients.
Services
Toga Engineering offers a large array of electrical and
mechanical services we work closely with our clients to ensure
their complete satisfaction.
In this company profile we will outline our basic services and will
always be able to tailor a solution to suit a client’s industrial or
commercial need.
Services offered by Toga Engineering
Maintenance outsourcing (electrical and mechanical)
While most maintenance suppliers are content to confine their maintenance services to delivering acceptable levels of service, Toga Engineering has developed a comprehensive service concept that makes maintenance operations a significant contributor to plant profitability. Currently in operation on multiple sites in a variety of process industries nationwide, Toga
engineering maintenance service is a unique partnership agreement in which Toga engineering
and the customer jointly defines the maintenance targets and shares the rewards of success.
Project management (electrical and mechanical)
Project Management is the use of knowledge, skills, tools, and techniques to plan and implement activities to meet or exceed stakeholder needs and expectations from a project.
Electrical compliance (electrical)
Electrical compliance is a legal requirement for all premises that make use of electricity. The compliance of an electrical installation is regulated according to SANS 10142-2. These regulations ensure that the installation is safe for use by the user.
Project design (electrical and mechanical)
Designing a good project is easier said than done! In the development community, evaluations have identified the following primary causes of poor performance in projects:
poor project design, planning and preparation, where one or more of the essential factors for success is overlooked
projects not relevant to the beneficiaries
risks and assumptions insufficiently taken into account
factors affecting long-term sustainability ignored
inability to make the right decisions at the right time over the lifetime of the project (which is related to inadequate monitoring and feedback)
Lessons from past experience not incorporated into new projects and practice (lack of evaluations, or inadequate use of them).
Breakdown service (electrical and mechanical)
Toga Engineering offers our clients a 24/7 breakdown service.
Panel design (electrical)
Our panel manufacturing facility caters for panels ranging from Form 1 to Form 4 including panels
for use in hazardous areas. The panels are built from approved electrical panel design drawings,
which detail all components in a parts list, cable schedules and sizes, terminal numbers, etc. All the
drawings are produced using AutoCAD and are capable of being emailed in PDF or original
format. A dimensional drawing of the internal and external panel enclosure with any display or
identification labels, lights, etc., will be fully detailed. The panel design, manufacturing and testing procedures are quality assured by ISO 9001 and SABS standards.
HT / LT Reticulation (electrical)
Toga Engineering can design and implement all HT (high voltage) and LT (low voltage)
reticulation needs that a client may require. We can also service all associated equipment in both the
HT and LT fields.
EXE installations (electrical)
Hazardous locations are areas where flammable liquids, gases or vapours or combustible dusts
exist in sufficient quantities to produce an explosion or fire. In hazardous locations, specially
designed equipment and special installation techniques must be used to protect against the explosive and flammable potential of these substances
Shutdowns (electrical and mechanical)
Toga Engineering offers effective Maintenance Plant Shutdown and Turnaround services. Toga
plays a major role with organizations to achieve a cost effective and time efficient shutdown/turnaround using our process and Maintenance Shutdown Planning Training . This is also obtained by using Toga products and qualified experienced shutdown managers. Using Toga Engineering’s managerial process and procedures, we have delivered substantial savings and
assisted organizations in achieving the results required in successfully planning a project. Our
process (Shutdown Strategy and Shutdown Procedures) has been developed to allow managers,
planners, supervisors, accounting departments and technicians to be part of the process. Our
shutdown Managers will assist your facility in the implementation of our products and services.
We have been successful in saving substantial amounts of money for organizations that have used
our products and services. We deliver on all of our services with integrity and professionalism.
Machine upgrades (electrical and mechanical)
Toga Engineering can upgrade most machines to achieve better operation in-line with the client’s needs. Through our use of the most up to date technologies available we can achieve our clients’ needs when upgrading an existing machine.
PLC integration and fault finding (electrical)
Toga Engineering can upgrade, design, install and fault find all brands of PLC and touch screens. Our trained technicians can assist clients with all PLC related needs.
Consulting services (electrical and mechanical)
Toga Engineering can analyse a client’s needs and advise the client on the best possible plan to achieve the goals set by the client in a cost effective and efficient manner.
Labour hire (electrical and mechanical)
Toga Engineering can offer a client labour based on their specific needs from semi skilled to skilled personnel.
Control and instrumentation (electrical)
Toga Engineering can offer the following services Instrument design
PLC integration
Instrument loop design
Instrument repairs
Specialised applications
Modify / upgrade control philosophy
Motor service (electrical and mechanical)
Servicing of all makes and sizes of electrical motors
Electronic services Test equipment and calibration facility
Monitors and LCD repair
Electronic equipment and boards
Power monitoring (Electrical)
The concept of Power Quality aims to define the conditions that allow electrical systems to
operate as intended, reliably. What are the limits of voltage fluctuations and other power influences that would adversely affect the operational performance and/or reduce the reliability, or the life-span of electrical equipment.
Assist in preventive and predictive maintenance
- Identify source and frequency of events - Establish precise location and timing of events - Develop maintenance schedules based on power quality trends
Determine the need for mitigation equipment
- Monitor and trend conditions - Analyze harmonics, voltage sag, power factor correction - Make decisions based on documented trends
Ensure equipment performance
- UPS and backup systems - Power quality mitigation
Assess sensitivity of process equipment to disturbances
- Evaluate performance against specifications - Compare current and voltage
Benchmark overall system performance
- Make multi-site comparisons - Energy rate comparisons
Improve energy rates
- Identify load versus demand - Conduct energy curtailment analysis
- Evaluate alternative rate structures
Toga Engineering is the proud distributor of the following products
Contacts us
086 123 TOGA (8642)
Cape Town (Head Office)
36 Stella Road
Montague gardens
Cape Town South
Africa
F: +27 21 552 0679
T: +27 21 552 0671/5
www.toga.co.za
Useful information
Useful information