Lead-free valves for potable water systems.

Rev 1/19

Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead content in plumbing products used for potable water systems. To meet this significant challenge, Milwaukee Valve recently developed its lead-free* UltraPure valve product line. Fully certified by independent testing agencies, the UltraPure line features robust alloys that meet or exceed these stringent requirements.

UltraPure for purer water. The new standard.

*Lead content less than 0.25%, defined as lead-free by Senate Law S.3874.

www.UltraPureNoLeadValves.com • 3

A valve for every application. With the new UltraPure valves added to our existing high-quality prod-uct lines, Milwaukee Valve remains your single source for virtually every residential, commercial or institutional application. From 1/4" bronze ball to 48" cast iron butterfly, you’ll find more than 10,000 valve types, sizes and configurations to meet your needs. Utilizing this extensive line of products, our experienced representatives can help you meet any water, HVAC installation, regulation and performance requirement.

UltraPure meets lead-free standards everywhere.Residential, commercial and institutional.

Drinking water Personal care

Cooking/food preparation Recreation

4 • www.UltraPureNoLeadValves.com

Health care Office

Showers Cleaning

www.UltraPureNoLeadValves.com • 5

UltraPure makes lead-free guess-free.Water Quality Seal.

UltraPure Gate, Globe & Check Valves• Certified by International Association of Plumbing and

Mechanical (IAPMO).

• Bronze and brass materials.

• Available in sizes 1/4" to 3".

• Available in pressure classes of 200 and 300 lb. WOG.

• Gate valves are bi-directional, an excellent choice for on/off service. Supplies full flow with low pressure-drop.

• Gate valves feature a solid wedge disc, threaded bonnet, are gland packed and available in rising and non-rising stem, and threaded or sweat ends.

• Globe valves feature bronze construction, with bronze disc, and are recommended for throttling operations.

• Globe valves are rated for 300 lb. WOG, and available in threaded or sweat ends.

• UltraPure check valves are designed to prevent backflow. Bronze and brass, with bronze disc.

• Swing check provides least pressure drop and simple, automatic closure. Rated for 200 and 300 lb. WOG.

• Silent lift check uses a spring to close the valve. Lift check is rated for 200 lb. WOG.

UltraPure Ball Valves• Certified by International Association of Plumbing and

Mechanical (IAPMO).

• Two-piece construction; bronze or brass. • Three-piece construction; bronze. • Available in sizes 1/4" to 3".

• All ball valves have RPTFE seats and seals, adjustable stem packing and blowout-proof stems.

• Standard and full port, with threaded and solder ends.

• Stainless steel trim and numerous handle and stem extension options available.

6 • www.UltraPureNoLeadValves.com

Butterfly Valves• Tested and certified by International Association of Plumbing and Mechanical to

IAPMO R&T to NSF/ANSI 372 and NSF/ANSI 61. ML and 6000 Series 2"-24", Ductile Iron Body, Aluminum Bronze Disc and EPDM Liner. CL and 5000 Series Cast Iron Body, Aluminum Bronze Disc, EPDM Liner, 2"-24"

• Iron butterfly valves - Available in sizes 2" to 48". - Achieves Senate Law S.3874 standards for potable water, regardless of mix of disc and liner materials. Consult factory for more details. - Available in cast iron or ductile iron bodies. - Resilient seated wafer and full-lug body styles. - Iron butterfly valves have phenolic-reinforced liners and 416 SS or 316 SS blowout proof stems. - Liner materials include EPDM, Buna-N, Viton®, Hypalon® and FDA Neoprene. - Disc materials include aluminum-bronze, nickel-plated ductile iron, 316 SS, epoxy and nylon coated. - Double Dead-End 2"-12".

• High performance butterfly valves - Available in sizes 2-1/2" to 24". - Designed for elevated temperatures and pressure requirements found in rigorous commercial construction and fluid-handling applications. - Machined seat containing multiple concentric sealing edges delivers bi-directional, positive shutoff. - Body materials and styles: WCB (carbon steel), CF8M (stainless steel), ANSI Class 150, ANSI Class 300• The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (.25%) of lead by weight.

Commercial Valves• Complete line of bronze gate, globe, angle and check valves, available in sizes 1/8" to 4" and pressure classes 125, 150, 200 and 300 lb. WOG.

• Iron gate, globe, check, angle and clip gate valves are available in sizes 2" to 24" and in 125 and 250 lb. pressure classes.

• Cast steel gate, globe and check valves are available in sizes 2" to 24" and ANSI classes 150, 300 and 600. Trim options include 13% chrome, hard-faced and 316 SS. • Many iron and cast steel valves meet the standards of Federal Senate Bill S3874. Consult factory for more details.• Fire protection valves are available in a variety of styles and types including valves for main and riser services, supervised and unsupervised services, as well as trim valves. Valves meeting UL, FM, NYCBS and MEA are available.

www.UltraPureNoLeadValves.com • 7

MILWAUKEE VALVE PRODUCTS

Products available from Milwaukee Valve:� Iron Lug-Body and Wafer-Body Butterfly Valves� Unibody Industrial Ball Valves� 2-Piece Industrial Ball Valves� Seal-Welded Industrial Ball Valves� 3-Piece Industrial Ball Valves� Cast Steel Gate, Globe and Check Valves� CS/SS High Performance Butterfly� Iron Gate, Globe, Check and Clip-Gate Valves� Silent Check Valves� 2-Piece Commercial Ball Valves� 3-Piece Commercial Ball Valves� Butterball® Butterfly Valves� Bronze Gate, Globe, Angle, Check and Specialty Valves� Fire Protection Valves� Actuation and Controls for Process Automation� Tank and Trailer� Transformer� UltraPure® (low lead valves)� UltraPress® (press valves)

BUTTERBALL, UltraPure, UltraPress and the Milwaukee Valve Logo are registered trademarks of Milwaukee Valve Company. © Milwaukee Valve Company, August 2007

Valves built to take it...since 1901

Milwaukee Valve Company16550 W. Stratton DriveNew Berlin, WI 53151Telephone 262/432-2700Fax 262/432-2701www.milwaukeevalve.com

The information presented on this sheet is correct at the time of publication. Milwaukee Valve / Hammond Valve reserves the right to change design,and/or material specifications without notice. For the most current information access www.milwaukeevalve.com or www.hammondvalve.com

MILWAUKEE VALVE