lbp chains & beltschains & belts - roller and conveyor chains chains and belts.pdf · -...

2.

L B P C H A I N S & B E LT S

L B P C H A I N S & B E LT S

RANGE EXTENSION

09e

2

LBP SERIES

LBP 8257

SERIES MATERIALTYPE HINGE MAIN INDUSTRIES

MATERIALS

LBP 882T

LBP 821

LBP 882M

Sideflexing chain

Straight Running chain

Straight Running chain

Sideflexing chain

LBP USPM Heavy Duty belt, 1” pitch

Type Description Features

FliteTop® LBP chains are equipped with stainless steel pins that ensure excellent wear resistance.

Matveyor® LBP belt is equipped with highly wear resistant PBT material pins.

APPLICATIONSLBP chains and belts are recommended for conveyors with packaged products accumulation, such as:

- PET bottles in heat shrink film or boxes

- Can packs in heat shrink film or clusters

- Plastic crates for glass bottles

- Cartons

They can also be applied for general conveying applications with back-line pressure problems.

Rollers Transfer Plates are suitable to convey products from one conveyor to the next (head-to-tail or 90° transfers) eliminating dead plates.

BENEFITS- Optimized rotation capability The geometrical parameters of rollers are studied in order to obtain a high ratio outside/inside roller diameter and a reduced width ( 6,5 mm - 0.256” ). The design, tolerances and special surface finishing are studied in order to ensure better roller rotation, reducing coefficients of friction with product and avoiding binding problems.

- Improved product motion

The UP material (Delrin®) now available for all LBP chains guarantees the lowest coefficient of friction between rollers and conveyed product and ensures longer chain wear life.

The new UP material and the roller geometry provide a noise reduction. - Maximum product support On larger width pins, additional supports are installed to maintain a flat carrying surface for better product stability.

- Conveyor standardization Same hinge dimension for straight and sideflexing conveyors due to the new LBP chains with 57 mm ( 2.244” ) hinge (LBP 8257 - LBP 882M).

- High mechanical strength The new LBP chains with 57mm heavy duty hinge ( 2.244” ) ensure high load resistance capabilities in applications with long accumulation sections.

- Minimized stranded products on transfer between conveyors (Roller Transfer Plates) The new modular roller transfer plates create an easy and smooth product transfer in head-to-tail and 90° conveyors with the same roller benefits found in Regina LBP chains. Easy to clean and fix on the conveyor, all module types (two, three or five rollers rows) can be mated to obtain different sizes, fitting many conveyors.

DuPont™ Delrin® and DuPont™ Kevlar® are registered trade marks of E.I. DuPont De Nemours and Associates

- Bottling lines

- Food industries

- Packaging lines

GUIDE SYSTEM

-

-

TAB

MAGNETIC

Available version with tracking guides

LBP 821 SERIES

LBP SERIES PRODUCT RANGE

Double

Single, 57mm Heavy Duty



-

TYPE AVAILABLE ROLLERS ROWS

MATERIAL

Plastic Multi Rollers 2, 3 or 5

AVAILABLE WIDTHS

85 mm ( 3.35” )

115 mm ( 4.53” )

ROLLER TRANSFER PLATE RANGE

NEW

NEW

Ø 4mm

Ø 11mm

Ultra Performance Acetal ResinGrey

DuPont™ Delrin® Ultra Performance special homopolymer acetal resin. Particularly suitable for applications where low coefficient of friction and reduced dusting are needed.

UP

UP

UP

UP

UP

UP

UP

NEW

3

LBP SERIES

190,5 7.50

mm inches

PLATEMATERIAL

CHAIN WIDTH W

CHAIN THICKNESSS CHAIN WEIGHT

N lbs5,40 3.63

REGINA REF.

LBP 821 (Straight Running - Double Hinge)

mm inches

WORKING LOAD (25°C / 77°F)

Kg/m lbs/ft

Dimension mm inchesPMLHEFTj

RDGC

38,1 136,5 8 28,8 6,35

22,5 4,8

11 230 140

1.5 5.374 .315 1.134

.25 .886

.189 .433 9.055 5.512

LBP 821 UP K 7½

LBP 821 UP K 10

LBP 821 UP K 12

254,0 10.00

304,8 12.00

19,3 0.760

19,3 0.760

19,3 0.760

2750 619

2750 619

2750 619

6,80 4.57

8,10 5.44

Standard length: 1,524 ( 5 feet )

LBP 821 SERIES

UP

UP

UP

Type: Straight running, Double hinge

Hinge dimension (M): 136,5 mm ( 5.374” )

Pin and roller shaft material: Cold rolled austenitic stainless steel

LBP 821 UP K 7½LBP 821 UP K 10LBP 821 UP K 12

4

Type: Straight running, Heavy duty hinge

Hinge dimension (M): 57 mm (2.244”)


190,5 7.50mm inches

PLATEMATERIAL

CHAIN WIDTH W

CHAIN THICKNESSS

CHAIN WEIGHT

N lbs

REGINA REF.

LBP 8257 (Straight Running - Heavy Duty Hinge )

LBP 8257 UP K 7½

LBP 8257 UP K 10

mm inches


Kg/m lbs/ft

254,0 10.00

19,3 0.760

19,3 0.760

3910 879

3910 879

5,47 3.68

6,93 4.66

Standard length: 1,524 m ( 5 feet )

LBP 8257 SERIES

LBP 8257 UP K 12 304,8 12.00 19,3 0.760 8,09 5.44 3910 879

Dimension mm inchesPMLHEFTj

RDGC

38,1 57 9,5 33,5

8 24 4,8 11 300 60

1.5 2.244 .374

1.319 .315 .945 .189 .433 11.811 2.362

NEW

NEW

UP

UP

UP

LBP 8257 UP K 10LBP 8257 UP K 12LBP 8257 UP K 7½

5

95,3 3.75

mm inches

PLATEMATERIAL

CHAIN WIDTH W


N lbs

REGINA REF.

LBP 882T (Sideflexing - TAB - Heavy Duty Hinge)

LBP 882T UP K 3 3/4

LBP 882T UP K 4 ½

mm inches

MINIMUM SIDEFLEXING RADIUS - R -

mm inches


Kg/m lbs/ft

Standard length: 1,524 m (5 feet)

114,3 4.50

19,3 0.760

19,3 0.760

667 26.26

609,6 24

3910 879

3910 879

3,40 2.28

3,95 2.65

LBP 8257 SERIES LBP 882T SERIES

Type: Sideflexing, Heavy duty hinge


Guide System: TAB


190,5 7.50LBP 882T UP K 7 ½

LBP 882T UP K 10 254,0 10.00

19,3 0.760

19,3 0.760

609,6 24

609,6 24

3910 879

3910 879

5,10 3.43

6,10 4.10

LBP 882T UP K 12 304,8 12.00 19,3 0.760 609,6 24 3910 879 6,70 4.50

NEW

PMCLHEFBTjY

RDGC (Straight)

GC (Curve)

38,1 57 76 9,5 41,6 8,7 24 17 4,8 11 83,5 230 60 60

1.5 2.244 2.992 .374 1.638 .343 .945 .669 .189 .443 3.287 9.055 2.362 2.362

Dimension mm inches

UP

UP

UP

UP

UP

LBP 882T UP K 3 3/4

LBP 882T UP K 4 ½ LBP 882T UP K 7 ½LBP 882T UP K 10LBP 882T UP K 12

6

190,5 7.50mm inches

PLATEMATERIAL

CHAIN WIDTH W


N lbs

REGINA REF.

LBP 882M (Sideflexing - MAGNETIC - Heavy Duty Hinge)

LBP 882M UP K 7 ½

LBP 882M UP K 10

mm inches

MINIMUM SIDEFLEXING RADIUS - R-

mm inches


Kg/m lbs/ft

LBP 882M UP K 12

Standard length: 1,524 m ( 5 feet )

254,0 10.00

304,8 12.00

19,3 0.760

19,3 0.760

19,3 0.760

609,6 24

609,6 24609,6 24

3910 879

3910 8793910 879

4,81 3.23

5,90 3.966,50 4.37

LBP 882M SERIES

Type: Sideflexing, Heavy duty hinge


Guide system: MAGNETIC

Pin material: Magnetic stainless steel

Roller shaft material: Cold rolled austenitic stainless steel

PMLHEFTjY

RDGC (Straight)

GC (Curve)

38,1 57 9,5 33,5 8 24 4,8 11 83,5 230 60 60

1.5 2.244 .374 1.319 .315 .945 .189 .433 3.287 9.055 2.362 2.362

Dimension mm inches

UP

UP

UP

NEW

NEW

LBP 882M UP K 7 ½LBP 882M UP K 10LBP 882M UP K 12

LBP 882M SERIES

7

BELT WEIGHT

WITHOUT GUIDE

LBP USPM ( 1”Pitch - Heavy Duty )

LBP USPM UP 0085

LBP USPM UP 0170

BELT NOMINAL WIDTHW

mm inches

LBP USPM UP 0255

LBP USPM UP 0340

85 3.35

170 6.69

255 10.04

340 13.39

LBP USPM SERIES

Belts wider than 680 mm available (increments of 85 mm).Example: 680 + 85 = 765 mm width, without guide Ref. LBP USPM UP 0765

Type: 1” Pitch, Heavy Duty

Pin material: PBT


Working load (at 25°C / 77°F): 35000 N/m (2,400 lb/ft)

Belt width: 85 mm (3.346”) or wider in 85 mm (3.346”) standard increments

Dimension mm inchesABCEGHjLP

RDT

10 6,5 63,5 6,26 42,2

27,2 11 6,35 25,4 230 12,7

.394 .256 2.5 .246

1.661 1.071 .433 .25 1

9.055 .5

44 1.732GC

REGINA REF.

WITH GUIDE

LBP USPMG1 UP 0340

LBP USPMG1 UP 0255

LBP USPMG1 UP 0170

LBP USPMG1 UP 0085

LBP USPM UP 0425

LBP USPM UP 0510

LBP USPM UP 0595

LBP USPM UP 0680

425 16.73

510 20.08

595 23.43

680 26.77LBP USPMG1 UP 0680

LBP USPMG1 UP 0595

LBP USPMG1 UP 0510LBP USPMG1 UP 0425

Kg/m lbs/ft

2,73 1.83

5,34 3.59

7,90 5.31

10,56 7.10

13,22 8.89

15,78 10.61

18,38 12.35

20,98 14.10

Standard length for belts up to a width of 425 mm: 1,524 m (60 pitches).Wider belts available in any requested length.

Tracking Guide Position

Dedicated Width

(Ref. LBP USPMG1 UP 0085)

Modular Belt

BELT MATERIAL

UP

UP

UP

UP

UP

UP

UP

UP

8

37 1.46

mm inches

L W REGINA REF.

Modular roller transfer plates

LTP-2R-K85

LTP-2R-K115

P E

LTP-3R-K85

MODULAR TRANSFER PLATES

Type: Plastic multi rollers


Mounting screws: M6 bolts and nuts in stainless steel

LTP-3R-K115 LTP-5R-K85

LTP-5R-K115

F BH A S j

37 1.46

49 1.93

49 1.9373 2.87

73 2.87

mm inches

85 3.35

115 4.53

85 3.35

115 4.5385 3.35

115 4.53

mm inches

11,5 0.45

11,5 0.45

23,5 0.9323,5 0.93

47,5 1.87

47,5 1.87

mm inches

6,8 0.27

6,8 0.27

9,5 0.379,5 0.37

21,5 0.85

21,5 0.85

mm inches

15 0.59

15 0.5927 1.06

27 1.06

mm inches

20 0.79

20 0.79

20 0.7920 0.7920 0.79

20 0.79

mm inches

17,5 0.69

17,5 0.69

17,5 0.69

17,5 0.6917,5 0.69

17,5 0.69

mm inches mm inches mm inches

50 1.97

80 3.15

80 3.15

80 3.15

50 1.97

50 1.97

1,5 0.06

1,5 0.06

1,5 0.061,5 0.06

1,5 0.061,5 0.06

11 0.43

11 0.43

11 0.43

11 0.4311 0.43

11 0.43

Ref. LTP-3R-K85 Ref. LTP-3R-K115



-

-

NEW

MATERIAL: UP

MACHINED VERSION

9

SPROCKETS FOR LBP 821 SERIES

Material: Reinforced Polyamide Hardware in stainless steel material

mm inches

153,20 6.03

mm inches

N° TEETH - Z PITCH DIAMETER OUTSIDE DIAMETER BORE SIZE (RB) ROUND BORE (RB) Ref. WEIGHT

25

DRIVE IDLER kg lbs

0,99 2.18

CMT 02 821 25 01CMT 02 821 25 02CMT 02 821 25 03CMT 02 821 25 04CMT 02 821 25 05CMT 02 821 25 07CMT 02 821 25 08CMT 02 821 25 09

CMT 03 821 25 01CMT 03 821 25 02CMT 03 821 25 03CMT 03 821 25 04CMT 03 821 25 05CMT 03 821 25 07CMT 03 821 25 08CMT 03 821 25 09

MOLDED SPLIT DRIVE AND IDLER SPROCKETS

154,2 6.1

MACHINED SPLIT DRIVE AND IDLER SPROCKETS

Other bore sizes in metric and imperial units are available.

Actual Effective

12,5

2530354045

1 3/16

1 1/4

1 7/16

mm inches

mm inches

117,34 4.62

mm inches


19

DRIVE IDLER kg lbs

0,850,820,780,870,810,79

1.871.811.721.921.791.74

CMAS 02 2815 19 30CMAS 02 2815 19 35CMAS 02 2815 19 40CMAS 02 2815 19 254CMAS 02 2815 19 365 CMAS 02 2815 19 492

117,0 4.6

Actual Effective

9,5

303540

11 7/16

1 15/16

mm inches


129,26 5.0921


129,4 5.110,5

303540

11 1/2

2

CMAS 03 2815 21 30CMAS 03 2815 21 35CMAS 03 2815 21 40CMAS 03 2815 21 254CMAS 03 2815 21 381CMAS 03 2815 21 508

1,031,010,991,050,990,96

2.272.232.182.312.182.12

141,22 5.5623


141,9 5.611,5

303540

1 1 1/2

2


1,271,231,221,301,211,19

2.802.712.692.872.672.62

153,20 6.0325


154,2 6.112,5

303540

11 1/2

2 1/2


1,501,471,441,501,441,40

3.313.243.173.313.173.09

165,21 6.5027


166,4 6.613,5

303540

11 1/2

2 1/2


1,891,871,841,911,841,80

4.184.134.074.214.063.97

177,23 6.9829


178,7 7.014,5

303540

123


2,192,172,142,202,122,10

4.834.784.724.854.674.63

MOLDED VERSION


1.

SPROCKETS FOR LBP 8257 - LBP 882M - LBP 882T SERIES


mm inches

147,21 5.80

mm inches


12

DRIVE IDLER kg lbs

0,44 0.97

CMT 02 882 12 01CMT 02 882 12 02CMT 02 882 12 03CMT 02 882 12 04CMT 02 882 12 06CMT 02 882 12 07CMT 02 882 12 08CMT 02 882 12 09CMT 02 882 12 12CMT 02 882 12 13

CMT 03 882 12 01CMT 03 882 12 02CMT 03 882 12 03CMT 03 882 12 04CMT 03 882 12 06CMT 03 882 12 07CMT 03 882 12 08CMT 03 882 12 09CMT 03 882 12 12CMT 03 882 12 13


150,0 5.9



Actual Effective

12

25303540

1 1 3/16

1 1/4

1 7/16

1 5/8

1 3/4

mm inches

mm inches

111,40 4.39

mm inches

N° TEETH - Z PITCH DIAMETER

OUTSIDE DIAMETER

BORE SIZE ia(RB) ROUND BORE (RB) Ref. WEIGHT

9

DRIVE IDLER kg lbs

0,330,320,310,290,330,320,29

0.730.710.680.640.730.710.64

CMAS 02 882 09 25CMAS 02 882 09 30CMAS 02 882 09 35CMAS 02 882 09 40CMAS 02 882 09 254CMAS 02 882 09 317 CMAS 02 882 09 381

111,8 4.4

Actual Effective

9

mm inches


10

mm inches

HUB DIAMETER(HD)

25303540

11 1/4

1 1/2

60,00 2.36

123,29 4.8510

0,370,370,360,350,370,350,33

0.820.820.790.770.820.770.73


124,4 4.910


25303540

11 7/16

1 15/16

75,00 2.95

135,24 5.3211

0,440,440,420,410,440,410,39

0.970.970.930.900.980.900.86


136,9 5.411


25303540

1 1 1/2

2

85,00 3.35

147,21 5.8012

0,540,540,530,520,540,520,49

1.191.191.171.151.191.151.08


149,3 5.912


25303540

11 1/2

2 1/2

90,00 3.54

MOLDED VERSION MACHINED VERSION

SPROCKETS FOR LBP USPM SERIES


2.




MOLDED VERSION MACHINED VERSION

SPROCKETS FOR LBP USPM SERIES

11

mm inches

146,27 5.8

mm inches

N° TEETH Z

PITCH DIAMETER

OUTSIDE DIAMETER

BORE SIZE (RB)

ROUND BORE (RB) Ref. WEIGHT

18

DRIVE IDLER kg lbs

145,00 5.7

mm inches

30405060

1 11/2

2 2 1/2

SQUARE BORE

SQ Ref.

MPBS T USP 18 30MPBS T USP 18 40MPBS T USP 18 50MPBS T USP 18 60MPBS T USP 18 254MPBS T USP 18 381MPBS T USP 18 508

MPBS F USP 18 30MPBS F USP 18 40MPBS F USP 18 50MPBS F USP 18 60MPBS F USP 18 254MPBS F USP 18 381MPBS F USP 18 508

0,300,290,270,250,310,290,270,22

0.670.640.600.550.680.650.600.48

MPBS Q USP 18 40MPBS Q USP 18 50MPBS Q USP 18 60MPBS Q USP 18 254MPBS Q USP 18 381

MPBS Q USP 18 635

170,42 6.721 170,00 6.7

30405060

1 11/2

2 2 1/2

MPBS T USP 21 30MPBS T USP 21 40MPBS T USP 21 50MPBS T USP 21 60MPBS T USP 21 254MPBS T USP 21 381MPBS T USP 21 508

MPBS F USP 21 30MPBS F USP 21 40MPBS F USP 21 50MPBS F USP 21 60MPBS F USP 21 254MPBS F USP 21 381MPBS F USP 21 508

0,370,350,340,310,370,360,330,29

0.810.780.740.690.820.780.730.63

MPBS Q USP 21 40MPBS Q USP 21 50MPBS Q USP 21 60MPBS Q USP 21 254MPBS Q USP 21 381

MPBS Q USP 21 635


mm inches

106,14 4.2

mm inches

N° TEETH Z

PITCH DIAMETER

OUTSIDE DIAMETER

BORE SIZE (RB)

ROUND BORE (RB) Ref. WEIGHT

13

DRIVE IDLER kg lbs

105,50 4.2

mm inches

303540

1 1 1/4

1 1/2

SQUARE BORE

SQ Ref.

MPBAS T USP 13 30MPBAS T USP 13 35MPBAS T USP 13 40MPBAS T USP 13 254MPBAS T USP 13 317MPBAS T USP 13 381

MPBAS F USP 13 30MPBAS F USP 13 35MPBAS F USP 13 40MPBAS F USP 13 254MPBAS F USP 13 317MPBAS F USP 13 381

0,210,190,180,210,200,18

0.460.420.400.460.440.40

114,15 4.514 113,5 4.5

303540

1 1 1/4

1 1/2



0,260,250,240,270,260,24

0.570.550.530.590.570.53

122,17 4.815 121,50 4.8

304050

11 1/2

2



0,310,290,260,320,290,25

0.680.640.570.700.640.55

MPBAS Q USP 15 40

MPBAS Q USP 15 381

130,19 5.116 129,20 5.1

304050

11 1/2

2



0,340,310,280,340,320,28

0.740.690.630.770.700.62

MPBAS Q USP 16 40

MPBAS Q USP 16 381MPBAS Q USP 16 254

Other bore sizes in metric and imperial units are available.Also available Z8 and Z10 solid sprockets. Please refer to Regina General Catalogue for more details.

1.

R e g i n A C O n v e yO R I S A R E G I S T E R E D T R A D E M A R K O F :

www.regina.it

04M

09e

ReginA CATene CALiBRATe S.p.A.

HeAD OFFiCe:Via Monza, 90

23870 Cernusco Lombardone (LC) - ItalyTel. +39 039 99801

Fax +39 039 [email protected]

ReginA de MeXiCO S.A. de C.v.Av. Aviación 5051-28

Col. San juan de Ocotan45019 Zapopan, jalisco – Mexico

Tel. +52 33 3627 4043Fax +52 33 3627 3930

[email protected]

ReginA inTeRnATiOnAL S.A.Diagonal 190,

1788-1655 josè Leon Suarez Prov. Buenos Aires – Argentina

Tel. +54 11 47296667Fax +54 11 47203210

[email protected]

ITALY

ReginA USA, inC.305 E. Mahn Court

Oak Creek, WI 53154 - USATel. 001 414 5710032Fax. 001 414 5710225

[email protected]

ReginA TiAnJin CHAin & BeLT CO., LTD.11B, Saida jimei Industrial Zone,

Saida the 2nd Road, XEDA 300385 Tianjin – China

Tel. +86 22 83961223Fax +86 22 83961202

[email protected]

ReginATel. +49 2662939196Fax +49 2662939198

[email protected]

CADenAS ReginA eSPAÑA, S.L.Calle Industria, 37

08120 La Llagosta - Barcelona - EspañaTel. +34 93 5742838 Fax +34 93 5740735

[email protected]

ReginA inDUSTRie S.a.r.l.Z.A.C. des Chatelliers

34 Rue des Frères Lumière45800 Saint jean De Braye - France

Tel. +33 238 836363Fax +33 238 836413

[email protected]

ReginA inTeRnATiOnAL LiMiTeDUnit 1, Dyneley Road,

Greenbank Business ParkWhitebirk, Blackburn,

Lancs BB1 3AB - United KingdomTel. +44 1254 661116Fax +44 1254 59456

[email protected]

WABRAPA RePReSenTAÇÕeSLTDA./ReginA CORRenTeS

Rua Augusta, 2516 – Cj. 141 – Cerqueira Cesar 01412-100 São Paulo/ SP – Brazil

Tel. +55 11 3086 1997Fax +55 11 3082 3707

[email protected]

USA FRANCE

UNITED KINGDOM

BRAZIL

CHINAMEXICO

ARGENTINA GERMANY

SPAIN

lbp chains & beltschains & belts - roller and conveyor chains chains and belts.pdf · -...

Documents