lb-1085 - thesharpexperience.com · lb-1085 consumes substantially less power, at 1,130 w. this...
TRANSCRIPT
LB-1085108-inch Class (10737⁄64" Diagonal)
Professional LCD Monitor
Surprising performance — the world’s largest* LCD for professional use —
108-inch Class (10737⁄64" Diagonal)
*Current as of December 1, 2008
With exceptional size and quality, The Sharp 108-inch Class (10737⁄64" Diagonal) LB-1085
redefines the possibilities of LCDs.LCDs take another step forward to lead the world. A 108-inch Class (10737⁄64" Diagonal) LCD monitor with
a breathtakingly large screen that satisfies virtually all your demands with its full 1080p High Definition
Sharp LCD panel. The ASV low-reflection black TFT LCD monitor with high-brightness, high-contrast
features enables outstanding moving images as well as high-visibility data displays. With a durable design,
capable of withstanding 24/7 non-stop operation, the Sharp 108-inch Class (10737⁄64" Diagonal) LCD also
benefits from a low power-consumption that is only possible with LCD technology. This truly next generation
display screen remains beautiful while catering to the harsh conditions of business and professional use.
108-inch Class (10737⁄64" Diagonal) LCD Technology
The power of world’s largest LCD monitor – 108-inch Class (10737⁄64" Diagonal)
Equipped with superior environmental performance in consideration of ecological impact
Extreme size LCD PanelApproximately 93 25/32" wide and 52 3/4" high, the dynamic impact of the screen size, which roughly equals four 52" Class (52 1/32" Diagonal) monitors, brings images to life with the highest impact even in large open areas.
37-inch Class (311⁄2" Diagonal)
52 3/4 inch* (134 cm)
*Monitor Screen Class Size
Low power-consumption design Reduction of substances harmful to the environmentCompared with other display technologies, the LB-1085 utilizes reduced quantities of lead, mercury, cadmium, hexavalent chromium, PBB (polybrominated biphenyl) and PBDE (polybrominated diphenyl ether).
The low power-consumption design aims at reducingCO2 emissions which are one of the causes of climate change. Despite the screen being approximately four times larger than our 52-inch Class (521⁄32" Diagonal), the LB-1085 consumes substantially less power, at 1,130 W. This power saving will likely result in benefits to business users where long operation times are required.
Our previous 52-inch Class(521⁄32 Diagonal) model(used for 4-screenmulti-displays)
Our previous 52-inch Class (521⁄32" Diagonal) model (used for 4-screen multi-displays)
LB-1085
52"
52"
52"
52"
46-inch Class (4563⁄64" Diagonal)
52-inch Class (521⁄32" Diagonal)
65-inch Class (6517⁄32" Diagonal)
108-inch Class (10737⁄64" Diagonal)
93 25/32 inch* (238 cm)
3
Extreme size LCD PanelApproximately 93 25/32" wide and 52 3/4" high, the dynamic impact of the screen size, which roughly equals four 52" Class (52 1/32" Diagonal) monitors, brings images to life with the highest impact even in large open areas.
37-inch Class (311⁄2" Diagonal)
52 3/4 inch* (134 cm)
*Monitor Screen Class Size
Low power-consumption design Reduction of substances harmful to the environmentCompared with other display technologies, the LB-1085 utilizes reduced quantities of lead, mercury, cadmium, hexavalent chromium, PBB (polybrominated biphenyl) and PBDE (polybrominated diphenyl ether).
The low power-consumption design aims at reducingCO2 emissions which are one of the causes of climate change. Despite the screen being approximately four times larger than our 52-inch Class (521⁄32" Diagonal), the LB-1085 consumes substantially less power, at 1,130 W. This power saving will likely result in benefits to business users where long operation times are required.
Our previous 52-inch Class(521⁄32 Diagonal) model(used for 4-screenmulti-displays)
Our previous 52-inch Class (521⁄32" Diagonal) model (used for 4-screen multi-displays)
LB-1085
52"
52"
52"
52"
46-inch Class (4563⁄64" Diagonal)
52-inch Class (521⁄32" Diagonal)
65-inch Class (6517⁄32" Diagonal)
108-inch Class (10737⁄64" Diagonal)
93 25/32 inch* (238 cm)
4
ASV low-reflection black TFT LCDConventional LCD
ASV Low-Reflection Black TFT LCD
High-Definition (1,366 (W) x 768 (H) pixels)
Full High-Definition (1,920 (W) x 1,080 (H) pixels)
High-Brightness, High-ContrastThe high-brightness panel enables virtually all images on the screen to be delivered clearly – even in bright environments. The high-contrast characteristics maximize the use of digital screen technology in almost all commercial environments.
Full High-DefinitionA full high-definition LCD with 1920 x 1080 pixels ensures that none of the image quality or dynamic impact is lost, vital for the reproduction of quality video, graphic charts, graphs, detailed line drawings and fine illustrations.
Example of a high-brightness, high-contrast LCD
Example of a low contrast LCD
The ASV low-reflection black TFT LCD displays images with beautiful quality even in bright environments. The 176-degree field of vision also allows images to be seen clearly from most any angle ensuring your message is is clearly seen by virtually everyone viewing the screen.
*Stand cover optional
61 1/32 inch (1,550 mm)
101 17/64 inch (2,572 mm)
Simulated Screen Images.
Transportation, financial institutions, stadiums, amusement facilities, hotels, etc.
Digital Signage
The ASV low-reflection black TFT LCD suppresses glare from sunlight and electric lights and is easily visible when viewing from an angle.
The bright screen is clearly visible even in bright environments.
Fan-less design reduces dust penetration.
Studios, movie theaters, museums, showrooms, promotional space, etc.
Public Spaces
The full spec HD-ready 1080p video faithfully reproduces a wide range of content — from still pictures to video.
The contrast is automatically adjusted in accordance with the scene and the high definition capabilities, making sure images are displayed with the correct brightness levels for easy viewing.
A slim and sleek form factor that complements and coordinates with most any room environment.
Shopping Mall
Airport
Broadcast Studio Sets
Lobby Display
Applications
Applications
Presentation
*Additional hardware and software is required separately to create each system.
The large 108" Class (10737⁄64" Diagonal) screen enables video conferences to be conducted without the usual sense of distance and separation.
During video conferences, images of both participants and data display simultaneously for more engaging and productive meetings.
The fan-less silent design means no sound distractions during meetings and lectures.
The vividness of the screen display is maintained even when used over extended periods of time.
The high-definition large screen ensures that even small fonts of text and data can be displayed vividly.
Equipped with PC and AV terminals as standard gives ultimate flexibility when connecting to a wide range of peripheral equipment.
Educational Institution
Video Conference
Factory
Surveillance Center
Monitoring
Applications
Applications
Schools, training centers, government facilities, etc.
Research institutes, public organizations, control rooms, public facilities, etc.
The impact of the large-screen 108-inch Class(10737⁄64" Diagonal) LCD stands out in large public spaces.
The wide viewing angles and low reflection ensure that the monitor is fully visible from virtually all viewpoints.
The high-definition, high-brightness and high-contrast fully exploit the superior presentation abilities of LCD technology.
The vivid and breathtaking power of LCD technology displays the true beauty and scale of any content as it was originally intended.
A super addition to any video conference setting,the LB-1085’s high definition capabilities accuratelyconvey information, while the large screen givesa sense of being in the same room.The large screen enables everything to be displayed in an easily visible fashion. This ensures information being discussed is accurately and clearly visible.
The LB-1085 performs reliably under harsh and demanding conditions. Multiple connectivity options expands its flexibility.The high reliability and the excellent connectivity satisfy the harshest and most demanding usage conditions.
108-inch Class (10737⁄64" Diagonal) Monitor Applications
5
Simulated Screen Images.
Transportation, financial institutions, stadiums, amusement facilities, hotels, etc.
Digital Signage
The ASV low-reflection black TFT LCD suppresses glare from sunlight and electric lights and is easily visible when viewing from an angle.
The bright screen is clearly visible even in bright environments.
Fan-less design reduces dust penetration.
Studios, movie theaters, museums, showrooms, promotional space, etc.
Public Spaces
The full spec HD-ready 1080p video faithfully reproduces a wide range of content — from still pictures to video.
The contrast is automatically adjusted in accordance with the scene and the high definition capabilities, making sure images are displayed with the correct brightness levels for easy viewing.
A slim and sleek form factor that complements and coordinates with most any room environment.
Shopping Mall
Airport
Broadcast Studio Sets
Lobby Display
Applications
Applications
Presentation
*Additional hardware and software is required separately to create each system.
The large 108" Class (10737⁄64" Diagonal) screen enables video conferences to be conducted without the usual sense of distance and separation.
During video conferences, images of both participants and data display simultaneously for more engaging and productive meetings.
The fan-less silent design means no sound distractions during meetings and lectures.
The vividness of the screen display is maintained even when used over extended periods of time.
The high-definition large screen ensures that even small fonts of text and data can be displayed vividly.
Equipped with PC and AV terminals as standard gives ultimate flexibility when connecting to a wide range of peripheral equipment.
Educational Institution
Video Conference
Factory
Surveillance Center
Monitoring
Applications
Applications
Schools, training centers, government facilities, etc.
Research institutes, public organizations, control rooms, public facilities, etc.
The impact of the large-screen 108-inch Class(10737⁄64" Diagonal) LCD stands out in large public spaces.
The wide viewing angles and low reflection ensure that the monitor is fully visible from virtually all viewpoints.
The high-definition, high-brightness and high-contrast fully exploit the superior presentation abilities of LCD technology.
The vivid and breathtaking power of LCD technology displays the true beauty and scale of any content as it was originally intended.
A super addition to any video conference setting,the LB-1085’s high definition capabilities accuratelyconvey information, while the large screen givesa sense of being in the same room.The large screen enables everything to be displayed in an easily visible fashion. This ensures information being discussed is accurately and clearly visible.
The LB-1085 performs reliably under harsh and demanding conditions. Multiple connectivity options expands its flexibility.The high reliability and the excellent connectivity satisfy the harshest and most demanding usage conditions.
6
STANDARD
Six-color hue adjustmentsC.M.S -Hue
C.M.S -Saturation
:Back :ExitRETURN MENU:Select :Adjust
R -1 -30 +30
Y 0 -30 +30
G 0 -30 +30
C 0 -30 +30
B 0 -30 +30
Reset
M 0 -30 +30
Changing redscoloser to
magenta or yellow
SHARP Digital Signage Software
SHARP Digital Signage Software SHARP Digital Signage Software
SHARP Digital Signage Software
Sharp — A Passion for Quality and Conservation
Used by the network server. Equipped with a content creation and delivery function to enable created contents to be distributed to 100 clients via the network.
A single LCD monitor is connected to a single PC.PN-SS01 Stand-Alone Version.
This is management software that distributes and displays programmed still images, videos and other content posted together with pre-scheduled data on a network from a Content Delivery Server to LCD monitors.
Stand-Alone System
PN-SS02 Network Version.Used by the client PC.Displays content received from the server (PC) in accordance with a preset schedule.
PN-SV01 Viewer Version.
Network System
Content Delivery and Display System
Four layout-free frameworks that support a diversified range of content, and two types of message bars can be displayed horizontally or vertically with multi-language support.
Easy operation with user-friendly interface that enables the simple setup of delivery time schedules and monthly schedules.
Programs being played back can be monitored, and the power on / off and input control can be managed all from a remote location. (PN-SS02 only)
Ability to reserve transmission times from the network to the LCD monitor. (PN-SS02 only)
Stand-alone version
Network System Configuration Example
Client PC*Client PC*
Client PC*Client PC*
Network version
SHARP Digital Signage Software Configuration
Network version(PN-SS02) 1 Viewer Version
Viewer Version(PN-SV01)
Client’s terminals
PN-SS02
PN-SV01PN-SV01PN-SV01
Stand-Alone System Configuration Example
PC for creating content (available on the
open market.)
PN-SS01
PN-SV01
USB
LCD monitor, information monitor
• Not all videos, sub-titles or other content can be used, depending on CPU, memory and other PC specifications.
*1 This operating environment must be available when using Microsoft® Windows Vista®. *2 For creating and editing programs and schedules. *3 Display used for displaying programs on the Stand-alone and Viewer Versions. *4 A codec (sold separately) might be required in some cases to play back video files.
Personal Computer
Memory
CPU-Celeron® M1.3GHz or faster (Pentium® 4 processor is recommended.)A high-performance CPU, such as the Pentium® 4 2GHz or faster, is required for programs including large volume of videos or content.*1
Background, Display Frames 1 to 4
Audio
MPEG, MPEG1, MPEG2, MPEG4, WMV (format for playing back on Windows Media® VIDEO - Windows Media® Player,) MOV (format for playing back on QuickTime Player,) Adobe® Flash® (format for playing back on Adobe® Flash® Player,) PowerPoint®, HTML, JPEG, BMP, GIF, PNG.
WAVE, MP3, AU, AIFF, WMA (format for playing back on Windows Media® Audio - Windows Media® Player,) MIDI, MOV (format for playing back on QuickTime Player.)
Microsoft® Windows® 2000, XP, Microsoft® Windows Vista®, Microsoft® Windows Server® 2003 (English version)
256MB or more (512MB or more is recommended.)*1
Hard Disk
Display (PC use)*2
Hard Disk: 20MB or more of free space (free space is needed for saving data.)
Full-color display with a resolution of 1,024 x 768 dots or higher.
OS Microsoft® Internet Explorer® 6.0 or later.Microsoft® PowerPoint® Viewer 2003 / 2007Microsoft® Windows Media® Player 9 or later.*4Adobe® Flash® Player QuickTime Player 7 or later (when QuickTime content is to be played back.)
Miscellaneous
USB port (only when USB memory is to be used.)LAN port (only network versions that enable TCP/IP communications.)
Interface
Panel (PC use)*3
• SHARP Digital Signage Software Operating Environment
• Supported Files
LB-1085, PN series LCD monitors.
Bright EnvironmentDark Environment
Active Contrast
Other Functions
The maximum display colors (approx. 758 million) are roughly 45 times that of conventional models (16.77 million), to reproduce natural images with extremely detailed and smooth gradations.
Brightness SensorThe brightness of the backlight automatically optimizes in accordance with surrounding brightness to ensure clear visibility in virtually all environments. Brightness levels are automatically lower in dark environments, saving power.
Image analysis provides optimal brightness and contrast levels for each scene. Dark scenes display with authentic levels of gradation to provide video expression over a wide dynamic range.
Active Contrast: ONActive Contrast: OFF
Maximum Color Display of Approximately758 Million Colors
Fine video adjustments are possible for color temperature, hue, color saturation and 3D-Y/C.
Video Adjustment Function
LB-1085 (approximately 758 million colors)
Number of colorson conventional models (approximately 16.77 million colors)
l Simulated Screen Images.
Fan-less DesignSharp’s fan-less architecture is not only quiet and ultra-reliable, but also easy on maintenance as there are no mechanical air ventilation fans or filters.
24/7*With the reliability of 24/7 non-stop operation and the screen maintaining its vividness even when used over long periods of time, the LB-1085 is the optimum display solution for commercial facilities, control centers, airports and other locations requiring extended use.*Note that continuous display of a static image for an extended period of time may result in temporary image memory retention on the screen.
Versatile InterfaceThe LB-1085 is fitted with versatile PC and AV terminals as standard to which a wide range of equipment can be connected, including HDTV recorders, Blu-ray Disc™ players and personal computers that support HDMI*. The RS-232C control also enables the power of the LCD to be switched on and off and the input to be selected remotely by the PC.
The terminals have been carefully laid out for stress-free cable layout.See terminal layout on page 9.
Quick Shoot FunctionImproves the response time ensuring that fast action videos display with clarity and vividness.
Quick Shoot : ONQuick Shoot : OFF DYNAMIC(Vibrant and dynamic color mode)
STANDARD (Standard mode)
The screen modes can be selected to match videos from various sources.
AV Mode
*HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Reliability and Flexibility to Serve Demanding Business Applications
Contents Editing Screen Display screen
Video
Horizontal message bar
Still images
A server for content creation and distribution (available on the open market)
Content created and distributed by the server (available on the open market)
*Separately-installed PC andLB-1085 LCDmonitor(or PN series.)
The Most Advanced Facilities for ManufacturingLCD TVs and Monitors.Our goal with LCD was to build more than the world’s finest TVs and Monitors. We envision a world where people will use LCD monitors to access computer networks and services anytime, anywhere. And we design our LCD TVs and monitors to require fewer resources to manufacture… and less energy to enjoy. In addition to superior performance, Sharp LCD TVs and monitors have a reputation for exceptional environmental responsibility.
The Most Advanced Technology MinimizesEnvironmental Impact.Sharp’s Kameyama Plant #2 is an environmentally-friendly LCD manufacturing facility and features one of the world’s largest roof mounted solar electric systems. Waste heat is recovered for air conditioning, with the co-generation system producing about one-third of the electricity used in the plant. The 5MW solar power system, 1MW fuel cell system and co-generation system together produce about one-third of the electricity used in the plant. This keeps CO2 emissions 40% lower than if the plant relied on thermally generated power. And all of the plant’s production wastewater is recycled, purified and reused.
Sharp’s New Plant.Sharp Corporation recently announced that it will soon begin construction of a 10th generation LCD panel factory in Sakai City, Osaka Prefecture, Japan. The new plant is scheduled to be the first LCD factory to use 10th-generation glass substrates, which are the world’s largest. At 112.2 inches by 120 inches, they are 60 percent larger than the 8th generation substrates used at Kameyama plant #2.
Environmental Product Innovations. Sharp’s goal is to minimize the environmental impact of our products by continually implementing and improving product technologies, designs and programs aimed at environmental conservation, from the materials used in the manufacture and packaging of our products, to their transportation, use and safe disposal at the end of their product life.
Sharp’s Kameyama Plant #2 in Japan is a world-class environmentally-friendly LCD manufacturing facility.
Other Key Functions
7
STANDARD
Six-color hue adjustmentsC.M.S -Hue
C.M.S -Saturation
:Back :ExitRETURN MENU:Select :Adjust
R -1 -30 +30
Y 0 -30 +30
G 0 -30 +30
C 0 -30 +30
B 0 -30 +30
Reset
M 0 -30 +30
Changing redscoloser to
magenta or yellow
SHARP Digital Signage Software
SHARP Digital Signage Software SHARP Digital Signage Software
SHARP Digital Signage Software
Sharp — A Passion for Quality and Conservation
Used by the network server. Equipped with a content creation and delivery function to enable created contents to be distributed to 100 clients via the network.
A single LCD monitor is connected to a single PC.PN-SS01 Stand-Alone Version.
This is management software that distributes and displays programmed still images, videos and other content posted together with pre-scheduled data on a network from a Content Delivery Server to LCD monitors.
Stand-Alone System
PN-SS02 Network Version.Used by the client PC.Displays content received from the server (PC) in accordance with a preset schedule.
PN-SV01 Viewer Version.
Network System
Content Delivery and Display System
Four layout-free frameworks that support a diversified range of content, and two types of message bars can be displayed horizontally or vertically with multi-language support.
Easy operation with user-friendly interface that enables the simple setup of delivery time schedules and monthly schedules.
Programs being played back can be monitored, and the power on / off and input control can be managed all from a remote location. (PN-SS02 only)
Ability to reserve transmission times from the network to the LCD monitor. (PN-SS02 only)
Stand-alone version
Network System Configuration Example
Client PC*Client PC*
Client PC*Client PC*
Network version
SHARP Digital Signage Software Configuration
Network version(PN-SS02) 1 Viewer Version
Viewer Version(PN-SV01)
Client’s terminals
PN-SS02
PN-SV01PN-SV01PN-SV01
Stand-Alone System Configuration Example
PC for creating content (available on the
open market.)
PN-SS01
PN-SV01
USB
LCD monitor, information monitor
• Not all videos, sub-titles or other content can be used, depending on CPU, memory and other PC specifications.
*1 This operating environment must be available when using Microsoft® Windows Vista®. *2 For creating and editing programs and schedules. *3 Display used for displaying programs on the Stand-alone and Viewer Versions. *4 A codec (sold separately) might be required in some cases to play back video files.
Personal Computer
Memory
CPU-Celeron® M1.3GHz or faster (Pentium® 4 processor is recommended.)A high-performance CPU, such as the Pentium® 4 2GHz or faster, is required for programs including large volume of videos or content.*1
Background, Display Frames 1 to 4
Audio
MPEG, MPEG1, MPEG2, MPEG4, WMV (format for playing back on Windows Media® VIDEO - Windows Media® Player,) MOV (format for playing back on QuickTime Player,) Adobe® Flash® (format for playing back on Adobe® Flash® Player,) PowerPoint®, HTML, JPEG, BMP, GIF, PNG.
WAVE, MP3, AU, AIFF, WMA (format for playing back on Windows Media® Audio - Windows Media® Player,) MIDI, MOV (format for playing back on QuickTime Player.)
Microsoft® Windows® 2000, XP, Microsoft® Windows Vista®, Microsoft® Windows Server® 2003 (English version)
256MB or more (512MB or more is recommended.)*1
Hard Disk
Display (PC use)*2
Hard Disk: 20MB or more of free space (free space is needed for saving data.)
Full-color display with a resolution of 1,024 x 768 dots or higher.
OS Microsoft® Internet Explorer® 6.0 or later.Microsoft® PowerPoint® Viewer 2003 / 2007Microsoft® Windows Media® Player 9 or later.*4Adobe® Flash® Player QuickTime Player 7 or later (when QuickTime content is to be played back.)
Miscellaneous
USB port (only when USB memory is to be used.)LAN port (only network versions that enable TCP/IP communications.)
Interface
Panel (PC use)*3
• SHARP Digital Signage Software Operating Environment
• Supported Files
LB-1085, PN series LCD monitors.
Bright EnvironmentDark Environment
Active Contrast
Other Functions
The maximum display colors (approx. 758 million) are roughly 45 times that of conventional models (16.77 million), to reproduce natural images with extremely detailed and smooth gradations.
Brightness SensorThe brightness of the backlight automatically optimizes in accordance with surrounding brightness to ensure clear visibility in virtually all environments. Brightness levels are automatically lower in dark environments, saving power.
Image analysis provides optimal brightness and contrast levels for each scene. Dark scenes display with authentic levels of gradation to provide video expression over a wide dynamic range.
Active Contrast: ONActive Contrast: OFF
Maximum Color Display of Approximately758 Million Colors
Fine video adjustments are possible for color temperature, hue, color saturation and 3D-Y/C.
Video Adjustment Function
LB-1085 (approximately 758 million colors)
Number of colorson conventional models (approximately 16.77 million colors)
l Simulated Screen Images.
Fan-less DesignSharp’s fan-less architecture is not only quiet and ultra-reliable, but also easy on maintenance as there are no mechanical air ventilation fans or filters.
24/7*With the reliability of 24/7 non-stop operation and the screen maintaining its vividness even when used over long periods of time, the LB-1085 is the optimum display solution for commercial facilities, control centers, airports and other locations requiring extended use.*Note that continuous display of a static image for an extended period of time may result in temporary image memory retention on the screen.
Versatile InterfaceThe LB-1085 is fitted with versatile PC and AV terminals as standard to which a wide range of equipment can be connected, including HDTV recorders, Blu-ray Disc™ players and personal computers that support HDMI*. The RS-232C control also enables the power of the LCD to be switched on and off and the input to be selected remotely by the PC.
The terminals have been carefully laid out for stress-free cable layout.See terminal layout on page 9.
Quick Shoot FunctionImproves the response time ensuring that fast action videos display with clarity and vividness.
Quick Shoot : ONQuick Shoot : OFF DYNAMIC(Vibrant and dynamic color mode)
STANDARD (Standard mode)
The screen modes can be selected to match videos from various sources.
AV Mode
*HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Reliability and Flexibility to Serve Demanding Business Applications
Contents Editing Screen Display screen
Video
Horizontal message bar
Still images
A server for content creation and distribution (available on the open market)
Content created and distributed by the server (available on the open market)
*Separately-installed PC andLB-1085 LCDmonitor(or PN series.)
The Most Advanced Facilities for ManufacturingLCD TVs and Monitors.Our goal with LCD was to build more than the world’s finest TVs and Monitors. We envision a world where people will use LCD monitors to access computer networks and services anytime, anywhere. And we design our LCD TVs and monitors to require fewer resources to manufacture… and less energy to enjoy. In addition to superior performance, Sharp LCD TVs and monitors have a reputation for exceptional environmental responsibility.
The Most Advanced Technology MinimizesEnvironmental Impact.Sharp’s Kameyama Plant #2 is an environmentally-friendly LCD manufacturing facility and features one of the world’s largest roof mounted solar electric systems. Waste heat is recovered for air conditioning, with the co-generation system producing about one-third of the electricity used in the plant. The 5MW solar power system, 1MW fuel cell system and co-generation system together produce about one-third of the electricity used in the plant. This keeps CO2 emissions 40% lower than if the plant relied on thermally generated power. And all of the plant’s production wastewater is recycled, purified and reused.
Sharp’s New Plant.Sharp Corporation recently announced that it will soon begin construction of a 10th generation LCD panel factory in Sakai City, Osaka Prefecture, Japan. The new plant is scheduled to be the first LCD factory to use 10th-generation glass substrates, which are the world’s largest. At 112.2 inches by 120 inches, they are 60 percent larger than the 8th generation substrates used at Kameyama plant #2.
Environmental Product Innovations. Sharp’s goal is to minimize the environmental impact of our products by continually implementing and improving product technologies, designs and programs aimed at environmental conservation, from the materials used in the manufacture and packaging of our products, to their transportation, use and safe disposal at the end of their product life.
Sharp’s Kameyama Plant #2 in Japan is a world-class environmentally-friendly LCD manufacturing facility.
8
SpecificationsLB-1085Model
LCD Panel
Computer Input
Native Resolution
Installation Orientation
Maximum Display Colors
Contrast Ratio
Maximum Brightness
Viewing Angle (H/V)
Screen Size (W x H)
Pixel Pitch
Video
Plug & Play
Video Color System
Power Management
Input Terminal
HDMI 3 channels
PC/AV Video
PC/AV Audio
Serial
Video
S-Video
Component
Audio
Output Terminals
Audio-Out
External Speakers
Power Supply
Power Consumption
Environ-mental Conditions
Operating Temperature
Operating Humidity
Dimensions (excluding stand)
Weight (excluding stand)
Package Dimensions (Weight)
Main Accessories
Response Time
Landscape
108-inch Class (10737/64" Diagonal),16:9 Wide Screen
1,920 x 1,080 pixels
Approximately 758 million colors
H 1.2405 mm x V 1.2405 mm
400 cd/m2
1,200:1
176°/176° (contrast ratio ≥10)
93 25/32" (2,381.76 mm) x 52 3/4 inch(1,339.74 mm)
Analog RGB, Digital (DVI 1.0)
VESA DDC2B
Not supported
NTSC (3.58 MHz), PAL
φ3.5 mm mini-stereo jack 1 channel
RS-232C (D-sub 9-pin x 1)
2 channels
2 channels (one of which is BNC)
RCA pin (L/R 4 channels)
RCA pin (L/R 1 channel)
Speaker output 15 W + 15 W (4 Ω)
1 channel
AC200-240V (Single-phase, 3-wire type) 50/60Hz
1,130 W (0.8 W on standby)
0 (+32°F) to 40 (+104°F)
20% to 80% RH (no condensation)
Approximately 10117/64" (2,572 mm) W x 8 3/64"(204 mm) D x 611/32" (1,550 mm) H
Approximately 429.9 lbs. (195 kg)
Approximately 10815/32" (2,755 mm) W x2911/32" (745 mm) D x 7917/32" (2,020 mm) H,(Approximately 699 lbs. (317 kg)
6 ms (Gray to Gray, Avg.)
DVI-I 29-pin 1 channel*1
AC power cord, remote controller and batteries, operating manual, bolt caps, power cord holder
Supported Display Mode TerminalsResolution (Pixels)PC
PC
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
1,920 x 1,080
1,920 x 1,080
1,280 x 720
640 x 480
800 x 600
1,280 x 1,024
1,360 x 768
1,600 x 1,200
1,024 x 768
1,400 x 1,050
720 x 400
VGA
SVGA
XGA
WXGA
SXGA
SXGA+
720p
1080i
1080p
UXGA
70Hz
60Hz
72Hz
56Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
50Hz
50Hz
60Hz
50Hz
45.0kHz
33.8kHz
31.5kHz
31.5kHz
35.1kHz
37.9kHz
48.1kHz
46.9kHz
48.4kHz
56.5kHz
60.0kHz
37.9kHz
37.5kHz
47.7kHz
64.0kHz
75.0kHz
67.5kHz
37.5kHz
28.1kHz
65.3kHz
56.3kHz
Check the connection operations between the unit and PC prior to installation. There may be cases in which images are not displayed correctly depending on the computer in use, even if the display mode is within the range of supported display mode. All figures are estimates.
Volume button
Select button
INPUT buttonMENU buttonPOWER button
Service Terminal
Audio Input
Component Input
Video InputOptical Digital Audio Output
PC/AV Audio Input
DVI-I Input
HDMI Input
HDMI Input
HDMI Input
Audio Input
Audio InputAudio Output
Video Input
S-Video Input External SpeakerRS-232C Input
Component Input
ComponentAudio Input
Standard Stand (included) * Stand installation (with the height of the screen center at 1,500 mm (59 1/16 inch) from the floor.)
• Height of the screen center (2 steps): 59 1/16" (1,500 mm) / 63" (1,600 mm) (Height from the floor to the screen center.)• Dimensions of footprint contact with the floor: approximately 60 1/4" (1,530 mm) W x 23 5/8" (600 mm) D *Weight: Approximately 121.3 lbs. (55 kg)
Unit: inch (mm)Unit: inch (mm)
*Either the PN-ZS1P or PN-ZS1C is required to install the display at the 59 1/16" (1,500 mm) / 63" (1,600 mm) height.
89 37/64(2275)
59 1/16(1500)
60 1/4 (1530) 23 5/8 (600)
2 45/64 (68.5)
LB-1085
10117/64 (2572)
8 3/64 (204)
57 7/8 (1470)
1615
/ 16
(430
)
611 /
32 (1
550)
Display Specifications *1 The monitor is not equipped with a mini D-sub 15-pin terminal. Analog PC signals can be input from the DVI-I terminal with the use of a third-party conversion cable or adapter. VESA: Video Electronics Standards Association DDC: Display Data Channel DVI: Digital Visual Interface. *These specifications are subject to change without prior notice. Speakers are not included with this unit. Brightness will vary according to input, color mode, monitor settings and backlight life.
Unit: inch (mm)
Protective Overlay Mounting Bracket: PN-ZK10
65 3/4 (1670)
Optional Peripheral Equipment Stand Cover: PN-ZS1C Support Rod: PN-ZS1P
72 1/4 (1835)
4 37/64 (116)
From Purchasing to Installation of the product
Pre-Site Survey Estimation Order and Delivery Maintenance Agreement& Maintenance
Please prepare, in advance, drawings that show the details of installation site, the delivery route inside the building and data that shows the strength of the floor.
The survey will be conducted in the presence of the user, Sharp partners, installers, architects and construction, and Sharp service personnel.
After the pre-site has been completed, an estimation of the expenses, in addition to the unit price, will be provided.
Please review the details of the “Warranty Terms and Conditions, and Maintenance Agreement”.
The product is built-to-order. A maintenance contract with Sharp or a partnering service company ensuring the safe use of this product is recommended.
108-inch Class (10737⁄64 Diagonal)
More About the Product
Using the product Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized Sharp dealer, servicer or installer. You should never attempt to perform this work by yourself. Sharp will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. Continuous display of static images may result in a temporary image retention effect on the screen. Please be aware, using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing may infringe on the rights of the creators, as protected by Copyright Law.
Catalog Notes Product specifications are subject to change without notice. Colors of products shown in this catalog may differ slightly from actual colors due to the limitations of the printing process. The displays shown on the LCD monitors appearing in photographs in this catalog are simulated images.
LB-1085 108-inch Class (10737⁄64 Diagonal) Full High-Definition LCD Monitor
*The stand cover is optional.
Landscape Installation
Notice
Dimensions Chart
• Stand Cover• Supports center of the screen heights of 59 1/16" (1,500 mm) and 63" (1,600 mm)• Vertical Part: Stainless steel/silver color, Base: Steel/black color• Extension Support is included*Weight Approx. 169.8 lbs. (77 kg), Package size 70 9/32 " (1,785 mm) x 31 7/64 " (790 mm) x (H) 15 3/4" (400 mm)
• Provides added protection to the display in high traffic areas. • One pair of mounting brackets• To ensure sufficient space
for maintenance, the monitor shouldnot be mounted directly on a wall.
• Monitor should only be mounted ontoa steel H-Beam frame
*Weight Approx. 50.7 lbs. (23 kg), Package size 80 21/64" (2,040 mm) x 12 1/64" (305 mm) x (H) 5 23/32" (145 mm)
• This is required for the installation with the center of the screen 59 1/16" (1,500 mm) to 63" (1,600 mm) from the floor in applications where the PN-ZS1C stand coveris not being used.
*Weight Approx. 14.3 lbs. (6.5 kg), Package size 36 15/64" (920 mm) x 7 7/8" (200 mm) x (H) 3 3/4" (95 mm)
28 5/32 (715)
( )When the height of the center of the screen is 59 1/16" 1,500 mm)
( )32 3/32 (815)
When the height of the center of the screen is 63" (1,600 mm)
( )The black extension support is installed between the Vertical Part and the base when the screen center height is adjusted to be 63" (1,600 mm)
Before purchase, Sharp or a partnering company will conduct a pre-site survey to verify the delivery route and check in detail the conditions of the installation site.
In the event the delivery route is not secured or the condition of the installation site is found not suitable for the installation of the product (such as for safety reasons), Sharp and/or its partnering company may recommend against the installation of the product at the specified location.
There may be instances where reinforcement work to the floor or walls, and/or installation of a power supply (AC200-240V, single phase, 3-wire) may be required.
The included stand, or an optional Sharp approved mounting bracket is necessary for installation. When the included stand is used, anchor bolts are required to fix the stand to the floor to prevent the unit from tipping over.
The LB-1085 is designed for horizontal placement (landscape orientation) in an indoor environment. It cannot be installed vertically (portrait orientation), suspended from a ceiling, tilted or laid flat.
Sufficient work space for maintenance, and an open route to carry the unit out from the installation site must be maintained after installation. The TFT color LCD panel is made utilizing high precision technology. However, there ma be minute points on the screen where pixels may be
inactive or permanently lit. If viewed at an acute angle, there additionally may appear to be uneven brightness or color. These are not malfunctions and will not affect the performance of the LCD monitor.
The backlight used in the LB-1085 has a life of approximately 24,000 hours. (This may differ based on conditions of usage.) Backlights are replaceable by an authorized Sharp servicer. A fee will be charged for out-of-warranty backlight replacement.
The LB-1085 is built to order. Other precautions and important points will be reviewed and confirmed during the pre-installation checks.
32 17/32 (826)
2 1/4 (57)
Limited Warranty
Three year, on-site parts and labor (landscapemode, excluding backlight). See warranty statementincluded in the product operation manual or as aPDF download at www.sharpusa.com
UPC 074000046795
1615
/ 16
(430
)16
15/ 1
6(4
30)
• Backlight life is the typical period of time after which the lamp’s power output will have decreased by about half, given that the LCD monitor is continuously used in a 77°F room under standard lighting and brightness conditions.
• Sharp and all related trademarks are trademarks or registered trademarks of Sharp Corporation and/or its affiliated companies.
• Think Green is a trademark of Sharp Electronics of Canada Ltd.• Microsoft® Windows® 2000/XP/Vista™, Microsoft Windows Server™ 2003, PowerPoint® and Internet
Explorer are trademarks or registered trademarks of Microsoft Corporation. • QuickTime is a trademark of Apple Computer, Inc. • Adobe, Flash and Adobe Flash Player are trademarks or registered trademarks of Adobe Systems, Inc.• Intel Pentium and Celeron are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.• HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks
of HDM Licensing, LLC.• All other trademarks are the properties of their respective owners.• Product specifications and design are subject to change without notice.
Product Information
9
SpecificationsLB-1085Model
LCD Panel
Computer Input
Native Resolution
Installation Orientation
Maximum Display Colors
Contrast Ratio
Maximum Brightness
Viewing Angle (H/V)
Screen Size (W x H)
Pixel Pitch
Video
Plug & Play
Video Color System
Power Management
Input Terminal
HDMI 3 channels
PC/AV Video
PC/AV Audio
Serial
Video
S-Video
Component
Audio
Output Terminals
Audio-Out
External Speakers
Power Supply
Power Consumption
Environ-mental Conditions
Operating Temperature
Operating Humidity
Dimensions (excluding stand)
Weight (excluding stand)
Package Dimensions (Weight)
Main Accessories
Response Time
Landscape
108-inch Class (10737/64" Diagonal),16:9 Wide Screen
1,920 x 1,080 pixels
Approximately 758 million colors
H 1.2405 mm x V 1.2405 mm
400 cd/m2
1,200:1
176°/176° (contrast ratio 10)
93 25/32" (2,381.76 mm) x 52 3/4 inch(1,339.74 mm)
Analog RGB, Digital (DVI 1.0)
VESA DDC2B
Not supported
NTSC (3.58 MHz), PAL
φ3.5 mm mini-stereo jack 1 channel
RS-232C (D-sub 9-pin x 1)
2 channels
2 channels (one of which is BNC)
RCA pin (L/R 4 channels)
RCA pin (L/R 1 channel)
Speaker output 15 W + 15 W (4 Ω)
1 channel
AC200-240V (Single-phase, 3-wire type) 50/60Hz
1,130 W (0.8 W on standby)
0 (+32°F) to 40 (+104°F)
20% to 80% RH (no condensation)
Approximately 10117/64" (2,572 mm) W x 8 3/64"(204 mm) D x 611/32" (1,550 mm) H
Approximately 429.9 lbs. (195 kg)
Approximately 10815/32" (2,755 mm) W x2911/32" (745 mm) D x 7917/32" (2,020 mm) H,(Approximately 699 lbs. (317 kg)
6 ms (Gray to Gray, Avg.)
DVI-I 29-pin 1 channel*1
AC power cord, remote controller and batteries, operating manual, bolt caps, power cord holder
Supported Display Mode TerminalsResolution (Pixels)PC
PC
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
1,920 x 1,080
1,920 x 1,080
1,280 x 720
640 x 480
800 x 600
1,280 x 1,024
1,360 x 768
1,600 x 1,200
1,024 x 768
1,400 x 1,050
720 x 400
VGA
SVGA
XGA
WXGA
SXGA
SXGA+
720p
1080i
1080p
UXGA
70Hz
60Hz
72Hz
56Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
50Hz
50Hz
60Hz
50Hz
45.0kHz
33.8kHz
31.5kHz
31.5kHz
35.1kHz
37.9kHz
48.1kHz
46.9kHz
48.4kHz
56.5kHz
60.0kHz
37.9kHz
37.5kHz
47.7kHz
64.0kHz
75.0kHz
67.5kHz
37.5kHz
28.1kHz
65.3kHz
56.3kHz
Check the connection operations between the unit and PC prior to installation. There may be cases in which images are not displayed correctly depending on the computer in use, even if the display mode is within the range of supported display mode. All figures are estimates.
Volume button
Select button
INPUT buttonMENU buttonPOWER button
Service Terminal
Audio Input
Component Input
Video InputOptical Digital Audio Output
PC/AV Audio Input
DVI-I Input
HDMI Input
HDMI Input
HDMI Input
Audio Input
Audio InputAudio Output
Video Input
S-Video Input External SpeakerRS-232C Input
Component Input
ComponentAudio Input
Standard Stand (included) * Stand installation (with the height of the screen center at 1,500 mm (59 1/16 inch) from the floor.)
• Height of the screen center (2 steps): 59 1/16" (1,500 mm) / 63" (1,600 mm) (Height from the floor to the screen center.)• Dimensions of footprint contact with the floor: approximately 60 1/4" (1,530 mm) W x 23 5/8" (600 mm) D *Weight: Approximately 121.3 lbs. (55 kg)
Unit: inch (mm)Unit: inch (mm)
*Either the PN-ZS1P or PN-ZS1C is required to install the display at the 59 1/16" (1,500 mm) / 63" (1,600 mm) height.
89 37/64(2275)
59 1/16(1500)
60 1/4 (1530) 23 5/8 (600)
2 45/64 (68.5)
LB-1085
10117/64 (2572)
8 3/64 (204)
57 7/8 (1470)
1615
/ 16
(430
)
611 /
32 (1
550)
Display Specifications *1 The monitor is not equipped with a mini D-sub 15-pin terminal. Analog PC signals can be input from the DVI-I terminal with the use of a third-party conversion cable or adapter. VESA: Video Electronics Standards Association DDC: Display Data Channel DVI: Digital Visual Interface. *These specifications are subject to change without prior notice. Speakers are not included with this unit. Brightness will vary according to input, color mode, monitor settings and backlight life.
Unit: inch (mm)
Protective Overlay Mounting Bracket: PN-ZK10
65 3/4 (1670)
Optional Peripheral Equipment Stand Cover: PN-ZS1C Support Rod: PN-ZS1P
72 1/4 (1835)
4 37/64 (116)
From Purchasing to Installation of the product
Pre-Site Survey Estimation Order and Delivery Maintenance Agreement& Maintenance
Please prepare, in advance, drawings that show the details of installation site, the delivery route inside the building and data that shows the strength of the floor.
The survey will be conducted in the presence of the user, Sharp partners, installers, architects and construction, and Sharp service personnel.
After the pre-site has been completed, an estimation of the expenses, in addition to the unit price, will be provided.
Please review the details of the “Warranty Terms and Conditions, and Maintenance Agreement”.
The product is built-to-order. A maintenance contract with Sharp or a partnering service company ensuring the safe use of this product is recommended.
108-inch Class (10737⁄64 Diagonal)
More About the Product
Using the product Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized Sharp dealer, servicer or installer. You should never attempt to perform this work by yourself. Sharp will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. Continuous display of static images may result in a temporary image retention effect on the screen. Please be aware, using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing may infringe on the rights of the creators, as protected by Copyright Law.
Catalog Notes Product specifications are subject to change without notice. Colors of products shown in this catalog may differ slightly from actual colors due to the limitations of the printing process. The displays shown on the LCD monitors appearing in photographs in this catalog are simulated images.
LB-1085 108-inch Class (10737⁄64 Diagonal) Full High-Definition LCD Monitor
*The stand cover is optional.
Landscape Installation
Notice
Dimensions Chart
• Stand Cover• Supports center of the screen heights of 59 1/16" (1,500 mm) and 63" (1,600 mm)• Vertical Part: Stainless steel/silver color, Base: Steel/black color• Extension Support is included*Weight Approx. 169.8 lbs. (77 kg), Package size 70 9/32 " (1,785 mm) x 31 7/64 " (790 mm) x (H) 15 3/4" (400 mm)
• Provides added protection to the display in high traffic areas. • One pair of mounting brackets• To ensure sufficient space
for maintenance, the monitor shouldnot be mounted directly on a wall.
• Monitor should only be mounted ontoa steel H-Beam frame
*Weight Approx. 50.7 lbs. (23 kg), Package size 80 21/64" (2,040 mm) x 12 1/64" (305 mm) x (H) 5 23/32" (145 mm)
• This is required for the installation with the center of the screen 59 1/16" (1,500 mm) to 63" (1,600 mm) from the floor in applications where the PN-ZS1C stand coveris not being used.
*Weight Approx. 14.3 lbs. (6.5 kg), Package size 36 15/64" (920 mm) x 7 7/8" (200 mm) x (H) 3 3/4" (95 mm)
28 5/32 (715)
( )When the height of the center of the screen is 59 1/16" 1,500 mm)
( )32 3/32 (815)
When the height of the center of the screen is 63" (1,600 mm)
( )The black extension support is installed between the Vertical Part and the base when the screen center height is adjusted to be 63" (1,600 mm)
Before purchase, Sharp or a partnering company will conduct a pre-site survey to verify the delivery route and check in detail the conditions of the installation site.
In the event the delivery route is not secured or the condition of the installation site is found not suitable for the installation of the product (such as for safety reasons), Sharp and/or its partnering company may recommend against the installation of the product at the specified location.
There may be instances where reinforcement work to the floor or walls, and/or installation of a power supply (AC200-240V, single phase, 3-wire) may be required.
The included stand, or an optional Sharp approved mounting bracket is necessary for installation. When the included stand is used, anchor bolts are required to fix the stand to the floor to prevent the unit from tipping over.
The LB-1085 is designed for horizontal placement (landscape orientation) in an indoor environment. It cannot be installed vertically (portrait orientation), suspended from a ceiling, tilted or laid flat.
Sufficient work space for maintenance, and an open route to carry the unit out from the installation site must be maintained after installation. The TFT color LCD panel is made utilizing high precision technology. However, there ma be minute points on the screen where pixels may be
inactive or permanently lit. If viewed at an acute angle, there additionally may appear to be uneven brightness or color. These are not malfunctions and will not affect the performance of the LCD monitor.
The backlight used in the LB-1085 has a life of approximately 24,000 hours. (This may differ based on conditions of usage.) Backlights are replaceable by an authorized Sharp servicer. A fee will be charged for out-of-warranty backlight replacement.
The LB-1085 is built to order. Other precautions and important points will be reviewed and confirmed during the pre-installation checks.
32 17/32 (826)
2 1/4 (57)
Limited Warranty
Three year, on-site parts and labor (landscapemode, excluding backlight). See warranty statementincluded in the product operation manual or as aPDF download at www.sharpusa.com
UPC 074000046795
1615
/ 16
(430
)16
15/ 1
6(4
30)
• Backlight life is the typical period of time after which the lamp’s power output will have decreased by about half, given that the LCD monitor is continuously used in a 77°F room under standard lighting and brightness conditions.
• Sharp and all related trademarks are trademarks or registered trademarks of Sharp Corporation and/or its affiliated companies.
• Think Green is a trademark of Sharp Electronics of Canada Ltd.• Microsoft® Windows® 2000/XP/Vista™, Microsoft Windows Server™ 2003, PowerPoint® and Internet
Explorer are trademarks or registered trademarks of Microsoft Corporation. • QuickTime is a trademark of Apple Computer, Inc. • Adobe, Flash and Adobe Flash Player are trademarks or registered trademarks of Adobe Systems, Inc.• Intel Pentium and Celeron are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.• HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks
of HDM Licensing, LLC.• All other trademarks are the properties of their respective owners.• Product specifications and design are subject to change without notice.
10
SharP ELECtroniCS CorPoration Professional Display Division Sharp Plaza, Mahwah, nJ 07495-1163 For more information call: 1-866-4-ViSUaL or email at: [email protected] www.sharpusa.com© 2008 Sharp Electronics Corporation. all rights reserved. Printed in the U.S.a. 10-28-08 LC-02-350