laser marking - deutsche messe...

Diode-Pumped Ytterbium Fiber Lasers

Laser Marking

Made in Germany

Edition 4.0

2

The basics

For current data refer to websitewww.cab.de/en/marking-laser.

All information on scopes of delivery, design and technical specifications correspond to the date of printing. Subject to change.

Using marking lasers is economic, when it comes to precisely and durably mark smallest components up to larger parts. The benefits of laser marking are manifold. The most significant are:

• Focusing in smallest spaces, as laser beams allow enormous energies to be bundled.

• Flexibility, as both metal and plastic parts can be marked. Even in places that are difficult to access.

• High marking speed, as strongly focused light does not have to overcome mechanical resistance.

• No mechanical force on components, as heat energy is used without direct contact.

• High durability, as laser marking is insensitive to acids or alkalis, UV radiation, heat and abrasion.

Marking lasers of the FL+ series are designed for a wide range of applications. The process allows stationary as well as on-the-fly marking on metal or plastic parts in various industries:

• Medtech: For example machine-readable codes on medical or surgical instruments. According to the guidelines for “Unique Device Identification“.

• Aerospace: Datamatrix codes on all strategic component parts, such as turbine components.

• Electronics: For quality assurance with permanent codes and alpha-numeric characters on PCBs, terminals, switches and others.

• Automotive: Laser marked codes for traceability of automotive components and assemblies. Allows marking contents including production data, date as well as serial, part and lot numbers, and others.

3

Marking laser FL+ – Applications

cab FL+ marking lasers are primarily used for the processing of metal and plastic parts. Different methods are commonly used depending on the requirement and material.

EngravingAblation of the material through evaporation with very high energy density that produces a deep marking with contour sharpness. An additional color change depending on the alloy or chemical composition improves the readability of the marking contents.

Surface removalThe laser marker removes top coating to show a different-colored material underneath.Examples: top coatings or anodizing layers, laser label material or day and night design on control buttons.

AnnealingIs mainly used with high-alloy, stainless steels and with titanium. Laser annealing creates a color change when the material is selectively exposed to heat and oxygen without noticeable material ablation.

Color changeIs used for the processing of plastic material. The color change depends on the chemical composition of the material and additives. Destroying color pigments and creating gas-bubbles within the material produces light marks. Carbonization produces dark marks.

FoamingThe laser beam melts the workpiece surface locally. Small gas bubbles increase the volume of the molten material producing a raised marking. Small gas bubbles within the material diffusely reflect the light.

QR codes for traceability

Automotive components

Plastic ident clips Cable tags

Cast parts

Aluminum nameplates

Consumption meters Size allocation in medical technology

Medtech Traceability in sterilization processes

4

Marking laser FL+

Different plano-spherical lenses allow the lasers to mark in a field of 69x69 up to 290x290 mm. The lasers are used to mark on plastic, metal and color-coated surfaces.

The marking lasers FL+ consist of two fiber coupled functional modules: The scan head and the control unit with integrated laser source. The scan head may be assembled in each installation position.

Control unit with integrated laser source is available in two different designs.

Precise, fast, economic

Performance and quality of a marking mainly relies on the output power and the laser beam‘s focusing.

cab marking lasers FL+ are diode-pumped, air-cooled and offer highest beam quality and pulse peak power.

An output power of the laser source of 10 up to 50 Watt is available.

Type 2 “Rack” for FL+10/20/30/50 Watt Preferably used for the integration into 19“ cabinets. Control unit and laser source are incorporated in a 19“ rack mount.

Type 1 “Tower” for FL+20/30 WattVery compact design, used both as desktop version and for the integration into housings.

2.1, 2.2, 2.3, 2.4

1.2, 1.3

2

1

3

5

6

7

4+

5

Marking laser FL+

InterfacesFor controlling and monitoring the process flow.

Ethernet 10/100 Base for PC. The device is supplied with a fixed IP address or configured in the DHCP mode.

Ethernet 10/100 Base for peripherals. For data communication from and to end devices.

2 x RS232 C for peripherals. For data communication from and to end devices.

Digital I/O for control and monitoring. Including eight freely programmable inputs and outputs. Protective circuit according to IEC 61131-2.

Remote for switching on and monitoring the laser.

Interlock/E-Stop for the integration into external safety circuits and the connection to an external E-Stop according to performance level d.

1

2

4

5

6

7

3 +

Technical data Tower 1.2 1.3Rack 2.1 2.2 2.3 2.4

Marking laser FL+10 FL+20 FL+30 FL+50Laser source Ytterbium fiber laser, pulsed, air-cooled cw output power max. W 10 20 30 50 Pulse energy mJ 0.5 1 1 1 Wave length nm 1064 Beam quality M2 <1.8 Pulse width ns 90-120 80-120 Pulse frequency kHz 20-80 2-200 2-200 2-200 Fiber coupling m 4.5 2.5 2.5 2.5Scan head Mounting Horizontal/vertical Marking speed mm/s ~5000Pilot laser

Wave length nm 650 cw output power mW <1Electronics Processor 32 bit clock rate MHz 600 Main memory (RAM) MB 256 Data memory (Flash) MB 512 Extensions (Flash) USB memory stickDimensions and weights Tower Rack 4RU 19“Control unit HxWxD mm 312x150x410 178x420x420 weight kg 15 16Scan head HxWxD mm 110x170x330 weight kg 7

Control panelKey switch Laser source ON/OFF

Push button pilot laser ON/OFF shutter open OPEN/CLOSEIndicator emission Laser source active laser error Laser source error ready Laser source ready power Power supply ON pilot laser ON shutter open Safety circuit openConnector service USB mini data memory USBOperating data FL+10 FL+20 FL+30 FL+50Operating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFPower consumption standby W 65 max.W 150 175 200 250Temp./humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingApprovals CE, FCC class A, ICE S3Performance level dLaser safety class EN60825-1 laser source Class 4 pilot laser Class 2

Remote

User I/O

6

Marking laser FL+ – Accessories

Plano-spherical lensesFor bundling the laser beam to focus energy on one spot. Lenses with marking fields in different sizes are available. The smaller the marking field the higher the resolution.

Mounting plateIs used to tightly screw the tower housing on a base plate or a frame design.

Laser protection windowsIs used to be built in housings or doors for monitoring the marking process. The window can be tighten bolt directly to the housing panel.

Assembly frames for laser protection windowAs an alternative, the laser protection window can be mounted with a black anodized front cover and rear side frame.

3.1 3.2 3.3 3.4Plano-spherical lens 100.1 160.1 254.1 420.1Working distance mm 141 202 302 541Marking field mm 69x69 112x112 180x180 290x290Spot diameter µm ~25 ~35 ~50 ~85=̂ Resolution dpi 1000 725 500 300

3.6 3.7Laser protection window 100x200 120x270Dimensions Height mm 128 148 Width mm 228 298 Thickness mm 3 3

3.5Mounting plate FL+TDimensions Width mm 144 Depth mm 460 Thickness mm 6

3.8 3.9Assembly frame 100x200 120x270Dimensions Height mm 128 148 Width mm 228 298 Thickness mm 2 2

290x290

180x180

541

302 20

2 141

112x112

69x69

Working distance Marking field

Adapter cables FL/FL+

User I/O and remote interfaces have different connector pin assignments between FL and FL+. The adapters allow the marking lasers FL+ to be connected to even older installations. The E-Stop also requires an adapted wiring.

3.1, 3.2, 3.3, 3.4

3.5

3.6, 3.7

3.8, 3.9

3.10, 3.11

3.10 3.11Adapter cable set FL-PCI/FL+ FL-TCP/FL+

Adapter cable Remote FL/FL+

Adapter cable User I/O FL-PCI/FL+ –Adapter cable User I/O FL-TCP/FL+ –

Description E-Stop

7

Marking software cabLase

All FL+ marking lasers have installed the marking software cabLase Editor 5. Key features are:

• Graphic design of layouts• Control of marking• Monitoring marking process

• Stand-alone modecabLase supports marking without the need of a PC. Marking layouts and associated fonts are downloaded and then transferred to the laser control for further management. Allows process control and monitoring by digital signals.

• Remote host modecabLase allows to be remote controlled via serial, Ethernet or ProfiBus connection by a host control, e.g. PC/PLC. Programming commands are available to select layouts, to change marking data, for process control and monitoring.

• Remote API interfaceSpecially designed to be integrated into demanding manufacturing environments. Allows to generate objects, its parameter setting, management and processing of associated layouts and variable contents.

• COM Automation Server For individual, customizable marking applications. Offers a command library with all functions of the marking software cabLase.

• Integration in ERP and MES systemscabLase offers program modules for the integration of laser marking systems into MES and ERP platforms. As member in SAP’s Printer Vendor Program cab has access to e.g. implement marking applications to the SAP data stream.

cabLase overviewSoftwareSoftware cabLase Editor 5, version 5.1.5.2 and higherCharactersFonts All TrueType fonts installed in Windows,

filled or as outline, laser specific single, double and triple line fonts. All fonts can be freely sca-led and „wobbled“.

Alignment Any alignment and direction of rotation, circular arc marking

Character spacing Stretching and compressingGraphicsGraphic elements Lines, circles, rectangles, polygones; Hatching

of all filled surface elements

Graphic formats PLT, DXF, BMP, JPG, PCX, WMF, EPS, TIF;All graphic elements can be scaled, moved, rotated, grouped or mirrored. Special tools are available to align the objects.

BarcodesLinear barcodes Interleaved 2/5

Code 39, Code 93Code 128

CodabarEANUPC

2D-Codes Data Matrix, ECC200, QR codeAll codes are variable in height, module width and ratio. Optionally: check digits, inverted codes

Additional featuresSerial number, time, dateVariable fieldsInsertion of graphic data out of Windows programsProgrammable laser parametersStorage of process and parameter filesControl of digital in- and outputs

Control and monitoring of additional axes, e.g. lifting, rotary, linear axes

Industry 4.0 and the Internet of Things symbolize tomorrow’s smart production. Software for users and connectivity are key technologies to be implemented. cab FL+ marking lasers are designed for the future and supplied with all necessary program and data interfaces. We will be pleased to advise you on questions about your application!

Industry 4.0

8

Laser label marker LM+

The laser label marker allows to precisely mark and cut labels in different sizes out of continuous material without the need of additional tools.

The labels can then be separated via cutter orrewound by using an external rewinder.

For marking lasers FL+20/30 Watt

Technical data 5.1 5.2Laser label marker LM+160.1 LM+254.1Working area HxWxD mm 5x160x190Positioning accuracy mm 0.2Transport speed mm/s 200Interior light LEDMaterial Die cut or continuous thickness mm 0.055-0.3 weight up to g/m2 500 width mm 25-120Label height max. mm 180

Roll outer diameter max. mm 300 core diameter mm 76 winding Outside or insideFor plano-spherical lens type 160.1 254.1Marking field mm 112x112 120x180Working distance mm 202 302Dimensions and weightHxWxD mm 520x440x802Laser protect. window HxW mm 50x100Mounting feet Ø mm 50Connector extraction Ø mm 50Weight kg 22Operating dataOperating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE

Control panelLED indicators Continuous material

LabelsPush buttons Material feed forwards

Material feed backwardsCut

Switches Automatic/manualE-Stop

MonitoringSafety circuits ClosedPressure roller LockedMaterial In marking position/no materialInterfacesInterlock/E-Stop FL+

Serial RS232 C FL+ Con5External E-StopCutter

External rewinder

Cutter

Laser label marker

Markinglaser FL+

5.1, 5.2

Accessories

External rewinder

Suction hose

Mobile cart

5.3

5.4

5.5

9

Laser safety housing LSG+65

The laser safety housing LSG+65 offers a professional solution that allows an easy and fast marking of single workpieces and small series. The desktop version provides enough working space even for larger workpieces. The manual operation door is balanced. Keyboard and monitor may, as an option, be installed in an ergonomic way on a pivot arm.

For marking lasers FL+10/20/30 Watt

Technical data 6.1Laser safety housing LSG+65Working area HxWxD mm 200x530x380Base plate T-slot WxD mm 495x375Pitch mm 25Z-Axis stroke mm 240Positioning accuracy mm 0.1Interior light LEDOperating door ManualFor plano-spherical lens type 100.1 160.1 254.1Marking field mm 69x69 112x112 180x180Working distance mm 141 202 302Workpiece height max. mm 30-270 210 110Workpiece weight max. kg 20Dimensions and weightHxWxD mm 615x675x860Laser protect. window HxW mm 200x100Mounting feet Ø mm 50Connector extraction Ø mm 50Weight kg 90Operating dataOperating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE

Control panel LED indicators Power

EmissionMarkingReadyError

Push buttons illuminated Control ON/OFFFocus finder ON/OFFExtraction ON/OFF

Air pressure ON/OFF

Interior light ON/OFFStart

Z-Axis UP/DOWNRotary axis LEFT/RIGHT

Switch E-StopKey switch Automatic/manualMonitoringSafety circuits ClosedCollective error Marking laser

ExtractionInterfacesInterlock/E-Stop FL+

Remote FL+

Digital I/O FL+

Step motor z-axis, turning-axisExtraction and filter device AF1

6.1

Accessories

Pivot arm for monitor with keyboard tray

Rotary axis

Suction hose

Mobile cart

6.2

6.7

6.3

6.6

10


The laser safety housing LSG+100 offers the industrial solution that allows the marking of parts in series with the FL+ markinglaser. The robust metal design provides a large working area and enough space for the integration of laser source and industrial PC into 19“ rack mounts.

Keyboard and monitor are installed in an ergonomic way on a pivot arm. The operation door opens and closes pneumatic driven.

For marking lasers FL+10/20/30/50 Watt

Control panelLED indicators Power

EmissionMarkingReadyError

Push buttons illuminated Control ON/OFFFocus finder ON/OFFExtraction ON/OFF

Air pressure ON/OFFInterior light ON/OFF

StartZ-Axis UP/DOWN

Rotary axis LEFT/RIGHTOPEN/CLOSE door

Switch E-StopKey switch Automatic/manualMonitoringSafety circuits ClosedCollective error Marking laser

ExtractionInterfacesInterlock/E-Stop FL+

Remote FL+

Digital I/O FL+

Step motor z-axis, turning-axisExtraction and filter device AF1

Technical data 7.1 7.2Laser safety housing LSG+100 230 V LSG+100 120 VWorking area HxWxD mm 460x980x980Base plate T-slot WxD mm 550x375Pitch mm 25Z-Axis stroke mm 500Positioning accuracy mm 0.1Interior light Low energy light bulbOperating door Pneumatic drivenFor plano-spherical lens type 100.1 160.1 254.1 420.1Marking field mm 69x69 112x112 180x180 290x290Working distance mm 141 202 302 541Workpiece height max. mm 30-530 470 370 130Workpiece weight max. kg 50Dimensions and weightHxWxD mm 2280x1000x1120Laser protect. window HxW mm 100x200Mounting feet Ø mm 80Connector extraction Ø mm 50Rack mount for marking laser FL+ and PC

19“, 4RU

Weight kg 395Operating dataOper. voltage/frequency VAC/Hz 220-240/50 100-140/60Power ON/OFFAir pressure supply bar 4-6Temp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE

Accessories

Rotary axisFor circumference marking of workpieces

X-AxisProgrammable linear axis for workpiece positioning

Cross tableTwo programmable linear axes in x- and y-direction for workpiece positioning

Rotary table moduleWorkpieces may be inserted and removed during the marking process

Laser typeplate handlingFor the fully-automated marking of typeplates made of metal or plastics

7.3

7.6

7.7

7.8

7.9

7.1, 7.2

11

Laser typeplate handling THS+

The laser typeplate handling THS+ allows to durably mark flat parts as e.g. typeplates or marker sheets made of plastics or metal.

Designed for the processing of nameplates for motors, pumps, control cabinets, and others it is used for applications in demanding industrial environments where the contents needs to be clearly legible even after years.

Two different designs are available:

Type 1 “THS+Basic”Plates or other flat parts up to a thickness of 4 mm are individually inserted into a jig, fed after start, marked and then automatically rejected.

Type 2 “THS+M”The plates are stacked in a magazine. The upper one of a stack is marked and then automatically rejected.

For marking lasers FL+20/30 Watt

Technical data 8.1 9.1Laser typeplate handling THS+Basic THS+MWorking area HxWxD mm 10x120x120 –Typeplate WxH min. mm max. mm

– 40x40– 110x90

Positioning accuracy mm ±0.2Handling motor driven Linear slide MagazinePlates 0.5 mm piece 1 100For plano-spherical lens type 160.1Marking field WxH mm 112x112 110x88Working distance mm 202Thickness plate max. mm 4 0.5-1.0Workpiece weight max. kg 0.5 0.1Dimensions and weightHxWxD mm 299x176x340Laser protect. window HxW mm 100x98Connector extraction Ø mm 50Total weight kg 14Operating dataOperating voltage/frequency 110-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85% not condensing stock 0-60 °C/20-80% not condensing transport –25-60 °C/20-80% not condensingLaser safety class EN60825-1 Class 1Approval CE

Control panel THS+Basic THS+MPush buttons illuminated Tray OPEN/CLOSE

AutostartSynchronizing/

Manual rejection

Switch E-StopMonitoringSafety circuits ClosedLinear slide Position –Magazine – PositionTypeplate In marking positionInterfacesInterlock/E-Stop FL+

Digital I/O FL+

Extraction and filter device AF1

THS+Basic

THS+M

8.1 9.1

Accessories

Customer-specific jig for THS+Basic

Customer-specific magazine for THS+M

8.2

9.2

Dire

ctio

n of

tran

spor

t Corner radius R at least 1 mm

Left/right 1 mm margins not markable

12

Extraction and filter devices AF1/AF2

Material processing with lasers produces toxic dust and gaseous contaminants. The extraction system protects the operator’s health and prevents the working area and lens from being contaminated, thus providing a constant laser output power.

The contaminated air of the working area is extracted by a high-power turbine and transported to the filter unit via a flexible hose. Contaminant particles, respectively dust are filtered out in the pre-filter and filter for suspended particles. Gaseous contaminants are absorbed by the active carbon filter. The cleaned air is then diverted into the environment.

The extraction and filter devices AF1/AF2 feature

• compact design, • small footprint,• simple and fast change of filter,• low sound level due to extract air silencer,• monitoring of filter saturation and motor.

AF2 is provided with an additional safety filter bag to absorb coarse particles and dust.

Consumables

Safety filter bag

Filter

Filter for susp. particles

Active carbon filter

Option

Pre-filter module 10.610.5

10.9

10.7

10.8

10.1, 10.2 10.3, 10.4

Technical data 10.1 10.2 10.3 10.4Extraction and filter device AF1-230 AF1-120 AF2-230 AF2-120Suction capacity max. m3/h 320Vacuum max. Pa 12500Filter Efficiency ClassSafety filter bag AF2 –

Filter AF1/AF2 96-98% M5

Filter for susp. part. AF1/AF2 ≥ 99,95% H13

Active carbon filter AF1/AF2 10L

Dimensions and weight

Device HxWxD mm Weight approx. kg

655x355x35535

630x460x35537

Connector extraction Ø mm 50Operating dataOperating voltage/frequency VAC/Hz 230/50 120/60 230/50 120/60Power consumption max. kW 1.2Sound level dB (A) <67Protection class IP 42Temp./air humidity operation 5-40 °C/10-85 % not condensing

stock 0-60 °C/20-80 % not condensing

transport –25-60 °C/20-80 % not condensingApproval CE

Operation panelPower ON/OFFLED filter indicators for Pre-filter

Filter for suspended particles

Push button 1 LED indicator green

Extraction ON/OFF

Push button 2 LED indicator red

Reset

Adjusting knob Speed regulationInterfaceDigital I/O interface a Extraction ON/OFF

Operation OKCollective error

24 VDCMonitoringPre-filter box SaturatedFilter for suspended particles Saturated

Motor Defective

Standard Optionally

Larger extraction devices on request

AF1 AF2

13


Part no. Device

5.1 5527265 Laser label marker LM+160.1

5.2 5527485 Laser label marker LM+254.1

Scope of delivery


Power cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/15 pole, 3 m, for extraction AF1Funnel for scan headGuide 1 mm for label transportGuide 2 mm for label transportBlind plug for extractionJoint with throttle valve for extractionAssembly instructions de/en

Part no. Accessories

5.3 5525355External rewinder ER 4/300 LM

5.4 5905818Suction hose, 2,5 m;2 hoses are requested.

5.5 On request: Mobile cart


Part no. Device

6.1 5527245 Laser safety housing LSG+65

Scope of delivery

Laser safety housing LSG+65Power cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1Assembly instructions de/en


6.2 5526167Pivot arm formonitor with keyboard tray

6.3 5905933 Rotary axis ZD306.4 5905978 3-jaw chuck ZD306.5 5526156 Connecting cable ZD306.6 5905818 Suction hose, 2,5 m

6.7 On request: Mobile cart

Laser marking – Product range

Marking laser FL+

Part no. Device

1.2 Tower 5527530 Marking laser FL+20T

1.3 5527540 Marking laser FL+30T

2.1 Rack 5527250 Marking laser FL+10R

2.2 5527580 Marking laser FL+20R



Scope of delivery

Marking laser FL+

USB software dongle cabLase Editor 5Power cable type E+F, 1,8 mPatch cable CAT 5e, 3 mAssembly instructions de/en


3.1 5525039 Plano-spherical lens 100.1 69x69 mm




3.5 5527237 Mounting plate FL+T

3.6 5907189 Laser protection window 100x200 mm

3.7 5906286 Laser protection window 120x270 mm

3.8 5527416 Assembly frame 100x200 mm

3.9 5527419 Assembly frame 120x270 mm

3.10 5527478 Adapter cable set FL-PCI/FL+

3.11 5527479 Adapter cable set FL-TCP/FL+

PC

Part no. Device

4.1 5570125 PC in 19" rack mount 4RU

4.2 5570130 Monitor 19“

4.3 5901626 Standard keyboard USB de4.4 5901677 Standard keyboard USB en4.5 5901621 Keyboard with trackball USB de4.6 5901651 Keyboard with trackball USB en

14


Part no. Device

7.1

5526900Laser safety housing LSG+100 230 V

7.2 5527490Laser safety housing LSG+100 120 V

Scope of delivery

Laser safety housing LSG+100Power cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1Pivot arm for monitor with keyboard trayAssembly instructions de/en

Part no. Accessories7.3 5905933 Rotary axis ZD307.4 5905978 3-jaw chuck ZD307.5 5526156 Connecting cable ZD307.6 On request: X-Axis7.7 On request: Cross table7.8 5526030 Rotary table module RTM650

7.9 5526037Laser typeplate handling THS 4.2

7.10 5525994 Roller set

Laser typeplate handling THS+Basic

Part no. Device

8.1 5527285Laser typeplate handling THS+Basic

Scope of delivery

Laser typeplate handling THS+BasicPower cable type E+F, 3 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1Assembly instructions de/en

Part no. Accessories8.2 On request: Customer-specific jig

Laser marking – Product range

Laser typeplate handling THS+M

Part no. Device

9.1 5527290Laser typeplate handling THS+M

Scope of delivery

Laser typeplate handling THS+MPower cable type E+F, 3 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1Assembly instructions de/en

Part no. Accessories9.2 On request: Customer-specific magazine

Extraction and filter devices AF1/AF2

Part no. Device

10.1 5906614Extraction and filter device AF1-230




Scope of delivery

Extraction and filter device AF1/AF2incl. safety filter bag (AF2 only) filter filter for suspended particle active carbon filterPower cable type E+F, 2,5 mAssembly instructions de/en


10.5 5905818 Suction hose, 2,5 m

Part no. Consumables PU10.6 5906623.001 Safety filter bag AF2 1010.7 5906617.001 Filter AF1/AF2 1010.8 5906618.001 Filter for susp. part. AF1/AF2 110.9 5906619.001 Active carbon filter AF1/AF2 1

15

Label software cablabel S3Standard and optional

Label dispensers HS/VSPrecise horizontal or vertical dispensing up to 180 mm width

Print & apply system Hermes+

For automation

Laser marking system FL+ seriesPrecise and fast

Label printer XD4TDouble-sided printing

Label printer A4+ TWith centered material positioningalso for textile materials

Label printer A4+MWith centered material positioning

Laser safety housingThe industrial solution

Label printer EOS1The compact one for label rolls up to 155 mm diameter

Label printers A+ seriesThe universal ones

Label printers XC seriesTwo-color printing

ConsumablesPrecise printing with cab labels and ribbons

Label printer EOS4The cost-effective one forlabel rolls up to 210 mm diameter

Label printer EOS mobileBoth EOS sizes withbattery pack for mobile print

Print & apply system Hermes CFor two-color printing and applying

cab product range at a glance

Print modules PX seriesFor integration intoautomatic labeling systems

12

3

4

5

6

7

Taiwancab Technology Co., Ltd.

16F-1, No. 700, Jhong Jheng RdJunghe, Taipei 23552phone +886 (02) 8227 3966fax +886 (02) 8227 [email protected]/tw

Chinacab (Shanghai) Trading Co., Ltd.

A507, No. 268, Tong Xie RdShanghai 200335phone +86 (021) 6236 3161fax +86 (021) 6236 [email protected]/cn

cab (Shanghai) Trading Co., Ltd.

Room 39, 10F, 8 Lin He Zhong Rd Tian He District, Guangzhou 510610phone +86 (020) 2831 [email protected]/cn

This document and any translations hereof are the property of cab Produkttechnik GmbH & Co KG. © cab/9009751The replication, processing, reproduction or distribution in whole or in parts requires our prior written consent.

Europe

Germanycab Produkttechnik GmbH & Co KGWilhelm-Schickard-Str. 1476131 Karlsruhephone +49 721 6626 0fax +49 721 6626 [email protected] www.cab.de

cab Produkttechnik Sömmerda GmbHAm Unterwege 18-2099610 Sömmerdaphone +49 3634 6860 0fax +49 3634 6860 [email protected] www.cab.de

Francecab Technologies S.à.r.l.2a Rue de la ModerZ.A. Nord du Val de Moder67350 Niedermodernphone +33 388 722501fax +33 388 722502 [email protected]/fr

America

USAcab Technology, Inc.87 Progress Avenue Unit 1Tyngsboro, MA 01879phone +1 978 649 0293fax +1 978 649 [email protected]/us

Latin AmericaAlejandro BalmacedaHacienda Jurica Pte 1615Colonial de Valle32553 Ciudad Juárezphone +52 656 682 3745fax +52 656 682 [email protected]/es

South Africacab Technology (Pty) Ltd.14 Republic StreetBordeaux2125 Randburgphone +27 11 886 3580fax +27 11 789 [email protected]/za

Asia

Headquarter and fabrication in Germany

to International subsidiaries

There are furthermore 820 distribution partners in more than 80 countries.

1

2 7

Africa

laser marking - deutsche messe...

Documents