laser cutter regulations
DESCRIPTION
Laser Cutter RegulationsTRANSCRIPT
-
MILLING MACHINEmaterial cardboard plywood MDF (medium density fiberboard) acrylic glass GS (no XT) polystyrene
o maximum dimension 1263 x 1175 mmo maximum height for cutting 5 mmo maximum height for graving 10 mm
o please bring your material to studio
- MILLING MACHINEdata DWG (
-
MILLING MACHINEcost approx. 5-15 EUR dependent on material,
cutting or graving, time for conditioning
-
SCREENSHOT DRIVER MILLING MACHINE
-
LASERmaterial
cardboard wood veneer plywood acrylic glass PU-foam glass (only graving) aluminium anodized (only graving) cork leather stone (only graving)
o maximum dimension 600 x 400 mm (incl.10 mm border)
o maximum height 5 mm
o please bring your material to studio
- LASERdata DWG (
-
LASERcost 2mm 4 EUR/board for acrylic glass< 1/2 board 5 EUR1 board 10 EUR
-
SCREENSHOT DRIVER LASER
-
3D-PRINTERmaterial ABS plus (thermodynamic plastic) various colours
> white > black > grey > red > orange > green > yellow > blue
maximum model-dimension: 200 x 200 x 300 mm minimal material thickness :
approx. 1mm, because of stability layer thickness : 0,17 or 0,25 mm for massive models it is possible to fill out with
combs
-
data STL only export from 3D Studio, Maya, Rhino, ACAD(>= AutoCAD 2008 )or SketchUp (with freeware PlugIn)
mesh needs to be closed> test the model with MiniMagics (freeware) to check before printing> repair open meshes with a 3d-modeling programm
reduce polygons for a short printing time, for example with meshlab (freeware)
o please bring your data on USB-stick
3D-PRINTER
-
cost 0,35 EUR/qcm material (incl. filling material)
+ 1 EUR for modelplatform
o printing time 3h - 3days + approx. 5 h forflushing (to remove the filling material)
3D-PRINTER
-
Screenshot MiniMagics
-
SCREENSHOT MESHLAB
-
SCREENSHOT DRIVER 3D-PRINTER
-
SCREENSHOT DRIVER 3D-PRINTER
-
SCREENSHOT DRIVER 3D-PRINTER
-
Contact
Prof. Stefan WorbesStudio Directorhouse15|R207
Maik Schler Studio Assistant| milling machine, laser, 3D-printerhouse 03 and 15
Dipl.-Ing. Anja Mller Assistant CADhouse 02 | R211
office hoursStudio of model building house 03 | 2.floormo-thu 8-16 fr 8-14.45
Studio for laser and milling house 15 | 1. floormo-thu 9-11 + 13-15 fr 8.30-11
3D-printerhouse 03 | 2.floor | R211 after consultation
Foliennummer 1Foliennummer 2Foliennummer 3Foliennummer 4Foliennummer 5Foliennummer 6Foliennummer 7Foliennummer 8Foliennummer 9Foliennummer 10Foliennummer 11Foliennummer 12Foliennummer 13Foliennummer 14Foliennummer 15Foliennummer 16Foliennummer 17