laser cladding applications specialists torch applied ......the lasercarb® system is cnc-controlled...
TRANSCRIPT
Mud Motor Radial BearingThis process is protected under Patent No. 8,795,794 B2
Laser Cladding Applications Specialists Torch Applied Welding Products
Technogenia produces high quality radial bearings using the Lasercarb® process. This unique technology applies a precise, metallurgical deposit to OD and ID surfaces for maximum anti-wear protection with no porosity or deformation.
The Lasercarb® system is CNC-controlled for an accurate and repeatable application of the powder. Multiple layers from .020-.065” can be applied to achieve desired build-up. Control of the HAZ (heat affected zone) by the laser process ensures the integrity of the bond with the base material.
Application-specific Technolase® powders with Spherotene® cast tungsten carbide and a Ni-Cr matrix combined with the high energy diode laser system produces a perfectly uniform weld pattern on virtually any component profile. The cast tungsten carbide exhibits a hardness factor of 3000HV +/- 500 for a high density deposit against abrasion, erosion and corrosion.
CLAD · PROTECT · ENDURE Technogenia Lasercarb® Technology, the leader in hardfacing solutions
LaserCarb®
BENEFITS • CNC, 5-Axis automated laser for precise deposit• Extremely high deposit efficiency• High hardness factor 3000 HV, low heat affected zone (.060”)• Virtually no porosity, minimal to no deformation • Multiple layers can be applied for maximum protection• Numerous combinations of powders, application-specific• Superior metallurgical bond• Applied to Carbon steel, Stainless steel, Non-mag stainless steel• Can be applied to virtually any component profile
A GLOBAL NETWORK FOR
LaserCarb® and Torch Applied Welding Products
Edmonton
Oklahoma City Houston
France
UnitedKingdom
Shanghai
Singapore
Brazil
Technogenia Lasercarb Oklahoma, Inc.
p 405 470 3350f 405 470 336241 S. Cooley Dr
Oklahoma City, OK 73127
Technogenia Lasercarb Technology Center
p 936 441 4770f 936 539 4760
708 Old Montgomery Rd (FM 2854)Conroe, TX 77301
email [email protected]
APPLICATIONS • Oil & Gas: Stabilizers, Adjusting rings, Bearings (OD and ID) see Patent Details No. 8,795,794 B2, Bearing housings, Drive shafts, Mandrels, Non-mag stabilizers, MWD and LWD tools
• Mining: Bits, Bearings, Bearing surfaces
• Tunneling: Bits, Bearings, Shafts
• Mixing Equipment: Impellers, Mixing blades
• Geodrilling: Bits, Shafts, Bearing surfaces
• Industrial: Pumps, Impellers, Shafts, Bearings
• Agriculture: Soil sample tools, Scrapers, Augers
• Construction: Bearings, Bearing surfaces, Drive shafts
Ropes & Powders
APPLICATIONS• Stabilizers, Drill bits, Wear pads• Mixer blades• Conveyor screws• Scrapers• and many other applications.
BENEFITS• Exceptional abrasion resistance • Unequaled wear resistance • Economic and reliable weld • No deformation of component • Multiple layers • Crack free