large animal housing ferret unit
TRANSCRIPT
Large Animal Housing
www.AllentownInc.com 609-259-7951 © Allentown, Inc. All Rights Reserved
Ferret Unit
Specifications: Installation Options: (opposite side plenums show for clarity)
Features: • Efficient operation • Individually Ventilated Cages • Cage environment isolated from room • Excellent in-cage air distribution • Fully seam-welded stainless steel construction • Clean out panels allow complete wash access • Interfaces with house supply and exhaust air • Fully autoclavable • Unique cage/lid design to allow easy access to cage
environment • Locked cage lid ensure safety and protection of animals
and staff (Optional) • Flip-up/hanging card holder and placement of food
feeder and (2) 16oz. water bottles to one side of the cage improves unobstructed observation
Rack Size*
Cage Size
Animal Capacity Supply Airflow
Exhaust Airflow Positive Negative ACH
Weight
24 Type 4S 15208
48 30 CFM (51 cmh)
23 CFM 38 CFM (39 cmh) (65 cmh)
60 603lbs (273.51ks)
Negative Operation IVC System
Supply Blower / Direct Exhaust
Direct Supply & Exhaust
Note: a.) Airflow at sea-level b.) Rack weight without blowers, animals, bedding or watering c.) Airflow tolerance ±10% d.) *Other configurations available
(101.6mm)
(101.6mm)
(101.6mm)
REV 04/2015
Allentown products are highly customizable at the end users request and this data sheet may not reflect the exact parameters specified for a specific project. Allentown recommends that projects that have critical size, airflow, water or electrical needs be handled through approval drawings to insure all critical areas are addressed and have visibility throughout the team including, A&E, MEP and construction persons.
Ferret Unit
Physical Dimensions (rear side plenums):
"B"
"A"
"C"
"D""D"
"E"
Rack Dimensions
Rack Size 24
inches mm
A 66.407 1687 B 69.774 1772 C 34.500 876
D SupplyPak = 9.25in / 235mm
D ExhaustPak = 10.0in / 254mm
Standard design (shown) Watering Bottle
Platform Split
Caster 5” (127mm) Diameter
Supply Blower EFS110
Exhaust Blower EFE113
Supply & Exhaust Blowers
Note: Add 3” (76.2mm) to “A” for 8” (203.2mm) diameter caster
Supply & Exhaust Blowers (Thimble Connect)
(152.4mm)