laptop aid 1.7

http://designforeveryone.howest.be/

Laptop Aid 1.7


Marc Van Strydonck / Kevin Deprez

± 56,5 hours€28,67

http://laptophulp2011.blogspot.com

ASSEMBLY MANUAL


BILL OF MATERIAL- Screws: €3,99- Varnish: €5,54- Glue (wood): €4,45-Side hinges: €3,11- Top hinges: €2,39- 5 block wooden beams (190x310x2100): €6,80- 1 flat wooden beam (190x900x2100): €2,39

LAPTOP AID 1.7

Tools: Saw, drill, screwdriver, sandpaper,

varnish, glue, screws

Standard parts: 2 top hinges and 2 side hinges

Tailored parts: Wooden beams

DESCRIPTION Saw the wooden beams to the right size. Look at the technical drawings for the part dimensions.

These dimensions can be adjusted for your own size!

LAPTOP AID 1.7

Technical plans: Yes

Duration: 30 minutes

Saw

Standard parts: No


Action cost: No

1

DESCRIPTION Drill the wholes into the wooden beams. Look at the technical drawings to know where the wholes need to be drilled.

LAPTOP AID 1.72



Drill

Standard parts: No


Action cost: No

3 DESCRIPTION Rub all of the surfaces with sandpaper until they are smooth enough, so you will not harm yourself when using the product.

LAPTOP AID 1.7

Technical plans: No

Duration: 1 hours

Sandpaper

Standard parts: No


Action cost: No

4 DESCRIPTION The tailored parts are assembled with screws. Between the surfaces we used glue to strenghten the product.

ATTENTION: If you are righthanded, mirror the assembly. Don’t forget to mirror the book support as well.

LAPTOP AID 1.7


Duration: 3 hours (glue drying included)

Glue and screwdriver

Standard parts: No


Action cost: No

5 DESCRIPTION The tailored parts are assembled with screws. Between the surfaces we used glue to strenghten the product.

LAPTOP AID 1.7


Duration: 3 hours (glue drying included)

Glue and screwdriver

Standard parts: No


Action cost: No

6 DESCRIPTION Varnish the front and back and let it dry. Rub the parts a little bit with sandpaper and varnish it again. This will ensure a clean surface finishing.

ATTENTION: Before varnishing, make sure the surface of the mouse pad is smooth enough.

LAPTOP AID 1.7

Technical plans: No

Duration: 2x24 hours (varnish drying included)

Varnish

Standard parts: No


Action cost: No

7 DESCRIPTION Fasten the top hinges.

LAPTOP AID 1.7

Technical plans: No


Screwdriver

Standard parts: Top hinges

Tailored parts: No

Action cost: No

8 DESCRIPTION Fasten the side hinges

LAPTOP AID 1.7

Technical plans: No


Screwdriver

Standard parts: Side hinges

Tailored parts: No

Action cost: No

9 LAPTOP AID 1.7

TECHNICAL ADDENDUM


TEAM CONTACTS


[email protected] +32 4 72 450 300





laptop aid 1.7

Design