laporan jawaban
DESCRIPTION
jawaban untuk pertanyaan pada hari seninTRANSCRIPT
1. Cari kelebihan, kekurangan, fungsi dari ;
- Core layer router
- Distribution layer router
- Access layer router
2. Sebutkan dedicated router dengan spesifikasinya
3. Buat topologi sesuai dengan router yang di tulis 4. Konfigurasi tiap router
Pengujian dilakukan dari user ke;
- Internet
- User pada network lain
1. Kelebihan, kekurangan, dan fungsi
NO LAYER KEKURANGAN
KELEBIHAN
PERBEDAAN
TUJUAN FUNGSI
1 CORE LAYER ROUTER
Tidak memiliki
fungsi utama pengotrolan
jaringan ataupun
fungsi yang sama
dengan access
router, dan mengkonsumsi
daya yang tinggi
Memiliki
sistem otomatis
pengamanan
jika terjadi
masalah dalam
core router untuk
menambah
waktu untuk
perbaikan
Kapasitas
bandwith yang tinggi, tidak
melakukan
proses yang
melambatkan
traffic(routing, filtering)
Melakukan
switching traffic dengan sangat
cepat
Menghubungkan
router di layer bawah untuk bisa
saling terkoneksi
dan terkoneksi
dengan core router
yang lain
2 DISTRIBUTION LAYER ROUTER
Bandwith yang
lebih sedikit
daripada core
router
Memiliki
fungsi yang
mengotrol
jaringan seperti limit
broadcast
domains,
routing, dan
packet manipulation
Mempunyai
fungsi utama
pengontrolan
akses jaringan
Melakukan
proses yang
tidak bisa
dilakukan di core router
routing, filtering,
akses WAN, dan
menentukan akses
core layer jika diperlukan
3 ACCESS LAYER ROUTER
Hanya memiliki
fungsi pengontrolan
jaringan utama
seperti yang ada
di distribution
roouter
Harganya
lebih murah dari pada
router yang di
atasnya
Melakukan
pengotrolan sederhana di
dalam jaringan
dan melakukan
authentikasi
untuk end user client
Menghubungkan
antar sesama end user layer
dengan jaringan
menjadi sarana bagi
suatu titik yang ingin berhubungan
dengan jaringan
luar.
2. Spesifikasi Dedicated Router
No
.
LAYER VENDOR TYPE SPESIFIKASI ALASAN
1 Core layer CISCO Cisco CRS-1 16- Bandwidth: 40 Gbps / port or Cisco CRS-1
System
Slot Single-Shelf
System
1,2 Tbps
Interface : 16 slot port
Dimensions: (H x W x D) 84 x
23.6 x 36 in (213.36 x 59.94 x
91.44 cm) With cable management and
front cover—(H x W x D) 84 x
23.6 x 39.71 in (213.36 x 59.94
x 100.84 cm)
Modular Services Card:
2 GB of default route memory, 1 GB of packet buffer memory
per side (2 GB total per line card
[ingress and egress])
Feature:
IP Features • Control-plane packet
handling • IPv4
• IPv6
• (X)ACLs
• QoS/class of service (CoS)
using Modular QoS CLI (MQC)
• IP packet classification
and marking
• Queuing (both ingress and egress)
• Policing (both ingress and
egress)
• Diagnostic and network
management support
Routing Features
• Multiprotocol BGP Version 4 (MP-BGPv4)
• Open Shortest Path First
Version 2 (OSPFv2)
• OSPFv3
• IS-IS • Static routes
• RPL
• Multicast
• MPLS
• High availability • Security
• Manageability
IP-over-DWDM Features • GFEC: standard G.975
Reed-Salomon algorithm
· EFEC: standard G.975.1
two orthogonally concatenated BCH super
FEC code
• Full C-band tunable laser
with 50-GHz spacing
Configurations
memiliki banyak
port dan bandwith
yang besar, dan
manipulasi packet
data yang cepat
• Router-to-router
SONET/SDH-like operations,
administration, maintenance,
and provisioning (OAM&P)
2 Core layer CISCO Cisco ASR 9010
Router
Bandwidth:400 Gbps per slot
Interface : 100 slot port
Protocols :DHCP, PPPoE,
SNMP2,SNMP1,RIP
Dimensions: (H x W x D) 36.8 x 17.5x 28.6 in.
Software :Cisco IOS XR
Software operating system
Karena device di
layer ini harus
mampu menerima
data dalam jumlah
besar dan dapat mengirim data
dengan cepat.
3 Core layer CISCO Cisco CRS-3 8-
Slot
Software compatibility: Cisco
IOS XR Software Release 4.0.0
or later
Cards, ports, and slots: 1-port
OC-768c/STM-256c packet over
SONET (PoS), 4-port OC-
192c/STM-64c PoS/Dynamic
Packet Transport (DPT), 16-port
OC-48c/STM-16 PoS/DPT, 8-
port 10 Gigabit Ethernet (GE),
4-port 10 GE, 42-port 1 GE, 1-
port OC-768c/STM-256c
tunable WDMPoS, 4-port 10GE
tunable WDMPHY, 14-port
10GE LAN/WAN PHY, 20-port
10GE LAN/WAN PHY, 1-port
100GE, CRS-1-SIP-800 carrier
card2- and 4-port OC-3c/STM-
1c PoS shared port adapters
(SPAs), 1-, 2-, and 4-port OC-
48c/STM-16c PoS/RPR SPA, 1-
port OC-192c/STM-64c
PoS/RPR SPA, 1-port 10GE
SPA
Features and functions:
Control-plane packet handling,
IPv4 host services, IPv4 unicast
forwarding, IPv4 equal-cost
multipath (ECMP), IPv6 host
services, IPv6 forwarding
services, IPv6 ECMP, Access
control lists (ACLs)
Physical dimensions: Chassis
height: 30.0 in. (76.2 cm),
Chassis width: 17.643 in.
(44.813 cm), Chassis depth:
Cisco CRS-3
System
Configurations
memiliki banyak
port dan bandwith
yang besar, dan
manipulasi packet
data yang cepat
30.28 in. (76.91 cm)
Software compatibility: Cisco
IOS XR Software Release 4.0.0
or later
4 Distribution
layer
CISCO Cisco 7204 VXR Bandwith:2 independent 32-bit,
50-MHz PCI buses with an
aggregate
bandwidth of 1.2 Gbps when
used with NPE-400. 3 independent 32-bit, 50-MHz PCI
buses with an aggregate
bandwidth of 1.8 Gbps when
used with NPE-G1 or NPE-G2
Ethernet (10BASE-T) Ports:
32
Ethernet (10BASE-FL) Ports :
20
Fast Ethernet (TX) Ports : 4
Fast Ethernet (FX) Ports : 4
Processor Memory : 1 GB
(max for NPE-G1 and default
for NPE-G2)
Dimensions: (H x W x D) 5.25 x 16.8 x 17 in.
Karena Router ini
memiliki fungsi
policy yang dapat
digunakan dalam
layer inidan
pengaturan lainnya
yang berguna
dalam jaringan
5 Distribution
layer
CISCO Cisco 7206 VXR Bandwith: 2 independent 32-
bit, 50-MHz PCI buses with an aggregate
bandwidth of 1.2 Gbps when
used with NPE-400. 3
independent 32-bit, 50-MHz PCI
buses with an aggregate bandwidth of 1.8 Gbps when
used with NPE-G1 or NPE-G2
Ethernet (10BASE-T) Ports:
48
Ethernet (10BASE-FL) Ports :
30
Fast Ethernet (TX) Ports : 6
Fast Ethernet (FX) Ports : 6
Processor Memory : 1 GB
(max for NPE-G1 and default
for NPE-G2)
Karena Router ini
memiliki fungsi
policy yang dapat
digunakan dalam
layer inidan
pengaturan lainnya
yang berguna
dalam jaringan
Dimensions: (H x W x D) 5.25 x 16.8 x 17 in.
6 Distribution
layer
CISCO Cisco 2600 Series Routers
Performance RISC
Architecture: Enables security features such as
data encryption, tunneling, and
user authentication and
authorization to protect
data assets WAN Interface Card Slots:
2
Cisco IOS Software:
Cisco IOS SP Service
Karena Router ini
memiliki fungsi
policy yang dapat
digunakan dalam
layer inidan
pengaturan lainnya
yang berguna
dalam jaringan
7 Access layer CISCO Cisco 3945E Bandwith: up to 350 Mbps
Total onboard WAN or LAN
ports: 4
Embedded hardware-based cryptography
acceleration (IPSec + Secure
Sockets Layer
[SSL]) : yes
Memory DDR2 ECC DRAM:2
Gb
External USB 2.0 slots : 2
Dimensions (H x W x D) : 5.25
x 17.25 x 18.75
in.(133.35 x 438.15 x
476.25 mm)
Router ini berfungsi
sebagai
pernghubung end
user dengan
jaringan
8 Access layer CISCO Cisco 2951 Bandwith: up to 75 Mbps
Total onboard WAN ports: 3
Embedded hardware-based cryptography
acceleration (IPSec + Secure
Sockets Layer
[SSL]) : yes
Memory DDR2 ECC DRAM:
512 Mbps
External USB 2.0 slots : 2
Dimensions (H x W x D) : 3.5 x
17.25 x 18.5 in.(88.9 x 438.2 x
469.9mm)
Router ini berfungsi
sebagai
pernghubung end
user dengan
jaringan
9 Access layer CISCO Cisco 1921 Bandwith: 15 Mbps Router ini berfungsi
sebagai
Integrated
Services Router
Total onboard LANports: 2
Embedded hardware-based
cryptography acceleration (IPSec + Secure
Sockets Layer
[SSL]) : yes
Memory DDR2 ECC DRAM:
512 Mbps
External USB 2.0 slots : 1
Dimensions (H x W x D) : 1.75
x 13.5 x 11.5 in.
pernghubung end
user dengan
jaringan
3. Topologi
4. Konfigurasi
Router Interface Menuju IP address
R1 Internet 10.10.10.1/29
R2 10.10.20.1/29
R3 10.10.30.1/29
R2 R1 10.10.20.2/29
Distribute Layer 10.10.40.1/29
R3 R1 10.10.30.2/29
R6 10.10.50.1/29
R4 R2 10.10.40.2/29
Access Layer 10.10.60.1/29
R5 R2 10.10.40.3/29
Access Layer 10.10.60.2/29
R6 R3 10.10.50.2/29
R9 10.10.70.1/29
R7 Distribute Layer 10.10.60.3/29
User 192.168.1.1/24
R8 Distribute Layer 10.10.60.4/29
User 192.168.2.1/24
R9 R6 10.10.70.2/29
User 192.168.3.1/24
Konfigurasi Routing
• Tambahkan konfigurasi routing rip dari seriap router
Uji koneksi user1
- ke internet (internet simulation 10.10.10.2/29)
- ke user2
- ke user3
Uji Koneksi User2
- ke internet
- ke user1
- ke user3
Uji Koneksi User3 - ke internet
- ke user1
- ke user2