LOGISTICS‘product identification & traceability solutions for warehousing, manufacturing & logistics’‘product identification & traceability solutions for warehousing, manufacturing & logistics’

AUSTRALIA CHINA INDIA JAPAN MALAYSIA NEW ZEALAND SINGAPORE THAILAND BELGIUM FRANCE GERMANY POLAND SPAIN UK USA

Traceability • Inventory Accuracy • Process Efficiency • Automated Data Capture

LOGISTICSTraditional warehouse management systems have often proven too complex and expensive to implement for the business benefits derived.

The Label&Track® Barcode/RFID Driven Traceability and Warehouse solution concentrates on the key areas most likely to yield maximum business benefits.

And with the Label&Track® Logistics Module this is all driven from a simple pallet scan at the point of work!

LOGISTICS MODULE

Pallet ScanA scan of the label applied to the pallet creates a record of the pallet in the system and specifies an initial put location. The ERP system SKU level inventory is then immediately updated with accurate real time production data.

Receiving & Put AwayWhen a pallet arrives at the finished goods warehouse it is received into the system and put away to a specific location by scanning the pallet label and the location label. This is available for the receiving of manufactured goods and purchased goods (against a purchase order). One-step or two-step

receiving and put away is available, with directed put away when required.

Pick, Pack & ShipUpon receipt of a sales order/picking request from the ERP system, a pick list is generated on the handheld terminal or if required to paper. Warehouse staff will use the handheld terminal to pick the appropriate pallets and product from the specified bulk or pick locations to ensure rotation of inventory on a FIFO basis. The pallet label is scanned and variances between ordered and picked quantities are highlighted. At shipping, container and vehicle details can be captured and multiple copies of the bill of lading printed. The ERP system is immediately updated with details of the goods shipped to drive the invoicing process. A packing module is available if required.

Inventory ManagementManage inventory movements within a warehouse by scanning the pallet label and the new location for it. Movements between warehouses can either be captured as adhoc movements by scanning a pallet out of a location and into a new location in the new warehouse, or as a directed transfer order from the ERP system which is then picked and shipped, then received at the destination. Alerts for product replenishment are generated when the quantity in the pick location fall below a predetermined minimum quantity for the product in this location.

Inventory Maintenance & AdjustmentsThe characteristics of the pallet include amending the number of units on the pallet (in the case of damaged cartons) or reclassifying the product on the pallet.

Bulk Product & Cycle CountingBulk product counts are performed easily by scanning locations and pallet labels. Individual pallet identification highlights potential variances and put locations that are specific to a pallet during an inventory reconciliation. This improves the accuracy and speed in which any recount must be performed. Location quantities only need be counted and entered to identify a pick location. When the stock count locations are finalized the ERP system is updated with the results. Individual parts of the warehouse can be selected at any time for cycle counts which are also performed by scanning a pallet and location label, with the final results then updated to the ERP system. Scheduling regular cycle counts should reduce the need for full stock inventories.

‘Many traditional, legacy warehouse

management systems have often proven

excessively complex and expensive to implement for the business benefits

derived...’

‘The Label&Track® logistics module

concentrates on the key areas most likely to yield maximum

business benefits...’

• Receiving and put-away• Directed put-away• Eliminates picking errors• FIFO warehouse rotation• Logs shipping details for later

documentation• Rapid and accurate stock pulls• All the complicated functions –

damages, reclassification, QA Control

• Drives the activities by scanning uniquely identified cartons and pallets

• Tracking inventory location in the warehouse at the pallet/carton level

• Proper rotation of inventory on a FIFO basis

• Complete inventory traceability based on a range of key parameters

• Single Unit to Pallet Management

• Lot Number Traceability• Location Management by

Pallet• Warehouse Rotation (FIFO)• ERP Systems Integration• All Transactions Driven by

Scan of Barcode

CALL TO FIND OUT MORE 1-888-871-8741

Traceability • Inventory Accuracy • Process Efficiency • Automated Data Capture

‘product identification & traceability solutions for warehousing, manufacturing & logistics’

For further information please contact us at 1-888-871-8741 or satosales@satoamerica.com

LOGISTICSTraditional warehouse management systems have often proven too complex and expensive to implement for the business benefits derived.

The Label&Track® Barcode/RFID Driven Traceability and Warehouse solution concentrates on the key areas most likely to yield maximum business benefits.

And with the Label&Track® Logistics Module this is all driven from a simple pallet scan at the point of work!

LOGISTICS MODULE

Pallet ScanA scan of the label applied to the pallet creates a record of the pallet in the system and specifies an initial put location. The ERP system SKU level inventory is then immediately updated with accurate real time production data.

Receiving & Put AwayWhen a pallet arrives at the finished goods warehouse it is received into the system and put away to a specific location by scanning the pallet label and the location label. This is available for the receiving of manufactured goods and purchased goods (against a purchase order). One-step or two-step

receiving and put away is available, with directed put away when required.

Pick, Pack & ShipUpon receipt of a sales order/picking request from the ERP system, a pick list is generated on the handheld terminal or if required to paper. Warehouse staff will use the handheld terminal to pick the appropriate pallets and product from the specified bulk or pick locations to ensure rotation of inventory on a FIFO basis. The pallet label is scanned and variances between ordered and picked quantities are highlighted. At shipping, container and vehicle details can be captured and multiple copies of the bill of lading printed. The ERP system is immediately updated with details of the goods shipped to drive the invoicing process. A packing module is available if required.

Inventory ManagementManage inventory movements within a warehouse by scanning the pallet label and the new location for it. Movements between warehouses can either be captured as adhoc movements by scanning a pallet out of a location and into a new location in the new warehouse, or as a directed transfer order from the ERP system which is then picked and shipped, then received at the destination. Alerts for product replenishment are generated when the quantity in the pick location fall below a predetermined minimum quantity for the product in this location.

Inventory Maintenance & AdjustmentsThe characteristics of the pallet include amending the number of units on the pallet (in the case of damaged cartons) or reclassifying the product on the pallet.

Bulk Product & Cycle CountingBulk product counts are performed easily by scanning locations and pallet labels. Individual pallet identification highlights potential variances and put locations that are specific to a pallet during an inventory reconciliation. This improves the accuracy and speed in which any recount must be performed. Location quantities only need be counted and entered to identify a pick location. When the stock count locations are finalized the ERP system is updated with the results. Individual parts of the warehouse can be selected at any time for cycle counts which are also performed by scanning a pallet and location label, with the final results then updated to the ERP system. Scheduling regular cycle counts should reduce the need for full stock inventories.

‘Many traditional, legacy warehouse

management systems have often proven

excessively complex and expensive to implement for the business benefits

derived...’

‘The Label&Track® logistics module

concentrates on the key areas most likely to yield maximum

business benefits...’

• Receiving and put-away• Directed put-away• Eliminates picking errors• FIFO warehouse rotation• Logs shipping details for later

documentation• Rapid and accurate stock pulls• All the complicated functions –

damages, reclassification, QA Control

• Drives the activities by scanning uniquely identified cartons and pallets

• Tracking inventory location in the warehouse at the pallet/carton level

• Proper rotation of inventory on a FIFO basis

• Complete inventory traceability based on a range of key parameters

• Single Unit to Pallet Management

• Lot Number Traceability• Location Management by

Pallet• Warehouse Rotation (FIFO)• ERP Systems Integration• All Transactions Driven by

Scan of Barcode

CALL TO FIND OUT MORE 1-888-871-8741

Traceability • Inventory Accuracy • Process Efficiency • Automated Data Capture

‘product identification & traceability solutions for warehousing, manufacturing & logistics’

For further information please contact us at 1-888-871-8741 or satosales@satoamerica.com

LOGISTICS‘product identification & traceability solutions for warehousing, manufacturing & logistics’‘product identification & traceability solutions for warehousing, manufacturing & logistics’

AUSTRALIA CHINA INDIA JAPAN MALAYSIA NEW ZEALAND SINGAPORE THAILAND BELGIUM FRANCE GERMANY POLAND SPAIN UK USA

Traceability • Inventory Accuracy • Process Efficiency • Automated Data Capturewww.satoamerica.com/CL4NX

©2014 SATO America, Inc. All rights Reserved. Rev D • Any unauthorized reproduction of this content, in part or whole, is strictly prohibited • SATO is a registered trademark of SATO Corporation and its subsidiaries in Japan, the U.S. and other countries. All other trademarks are the property of their respective owners.

CORPORATE10350-A Nations Ford Rd Charlotte, NC 28273Phone: (704) 644-1650 Fax: (704) 644-1662satosales@satoamerica.com

UNITED STATES MEXICOCANADA

LABEL MANUFACTURING, SERVICE & SALESCENTRAL AMERICA

CARIBBEAN

SATO AMERICA, INC.