la certificazione dei prodotti con il modulo radio «embedded»
TRANSCRIPT
La certificazione dei
prodotti con il modulo
radio «embedded»
IOTHINGSWEEK, 29 maggio 2020
Carlo Casati
1
Il quadro generale
2
Geography(International Approval)
Radio product category(Testing)
Industry segment(Certification)
SpecificNational
Standards
Definizione delle normative da adottare
6
Modulo Radio EMC Radio Sicurezza
GSM/GPRS 2G/EDGE EN 301 489-50/-52 EN 301 511 EN 62368-1 + EMF
UMTS/LTE 3G/4G EN 301 489-50/-52 EN 301 908-2/-13 EN 62368-1 + EMF
5G EN 301 489-50/-52 EN 301 908-24/-25 EN 62368-1 + EMF
GNSS (GPS/Galileo) EN 301 489-19 EN 303 413 EN 62368-1 + EMF
SRD f < 25 MHz (RFID) EN 301 489-3 EN 300 330 EN 62368-1 + EMF
SRD 25 MHz < f < 1 GHz EN 301 489-3 EN 300 220-2/-4 EN 62368-1 + EMF
SRD f > 1 GHz (Radar) EN 301 489-3 EN 300 440 EN 62368-1 + EMF
WiFi 2,4 GHz (Bluetooth) EN 301 489-17 EN 300 328 EN 62368-1 + EMF
WiFi 5 GHz EN 301 489-17 EN 301 893 EN 62368-1 + EMF
Ultra Wide Band (UWB) EN 301 489-33 EN 302 065-1/-2 EN 62368-1 + EMF
Broadcast TV (digital) EN 301 489-14 EN 302 296-2 EN 62368-1 + EMF
Broadcast Radio (DAB) EN 301 489-11 EN 302 077-2 EN 62368-1 + EMF
Scope FCC Rule Parts
BPL Intentional Radiators FCC Part 15, Subpart G
Broadcast Radio Services Part 73, Part 74 (below 3 GHz)
Citizens Broadband Radio Services
Part 96
Commercial Radio Services Part 22 (cellular), Part 24, Part 25 (below 3 GHz), Part 27
General Mobile Radio Services
Part 22 (non-cellular), Part 90 (below 3 GHz), Part 95 (below 3 GHz), Part 97 (below 3 GHz),Part 101 (below 3 GHz)
Industrial, Scientific, and Medical Equipment
Part 20, Part 90.219
Intentional Radiators FCC Part 15, Subpart C
Microwave and Millimeter Bands Radio Services
Part 25 (above 3 GHz), Part 30, Part 74, Part 90 (above 3 GHz), Part 95 (above 3 GHz), Part 97 (above 3 GHz) Part 101
Signal Boosters FCC Part 15, Subpart G
U-NII with or without DFS Intentional Radiators
FCC Part 15, Subpart E
UWB Intentional Radiators FCC Part 15, Subpart F
Unintentional Radiators FCC Part 15, Subpart B
Prima di scegliere un modulo radio
Cosa bisogna conoscere ?
• caratteristiche RF dettagliate di ogni modulo radio utilizzato
• tipologia di antenne previste e relative caratteristiche RF
• disponibilità di Certificati rilasciati da Organismi Notificati
(UE/CE) o «Technical Certification Bodies» (USA/FCC), oppure
disponibilità di rapporti di prova completi, verificando le
condizioni di validità della conformità
• norme applicate dal fabbricante originale del modulo radio ai
sensi della conformità alla direttiva RED o certificazione FCC
(uso previsto idoneo per il prodotto finito)
• disponibilità di note applicative per la corretta integrazione dei
moduli radio
EMC and Radio Testing
Radiated and ConductedEmissions
Radiated and Conducted
Susceptibility
Radio Spectrum(SpouriousEmission)
ElectromagneticFields (SAR)
Integrazione dei moduli radio
• i moduli radio certificati possono
essere installati in un dispositivo
host (ad esempio un computer, o
un altro dispositivo, …)
• il prodotto finito può beneficiare di
una certificazione già concessa al
modulo radio
• sono richieste prove aggiuntive
(test radio parziali ed compatibilità
elettromagnetica)
11
chipset
radio
Host
modulo
radio
Ambito di applicazione RED
13
Prodotto
con una
interfaccia
radio ?Non si applica la RED
(ad esempio LVD +
EMC)
Si applica la RED
(+ altre eventuali
direttive)
SINO
Dichiarazione di Conformità UE:• Il contenuto è descritto nell’Allegato VI
• Dichiarazione di Conformità semplificata (Allegato VII)
• la dichiarazione è rivolta ai requisiti essenziali, non alle norme
• indicare le norme armonizzate e separatamente le altre norme
Prima della Commercializzazione
• Prodotto progettato e realizzato affinché siano
rispettati i requisiti essenziali
• Eseguire un Procedura di Valutazione della
Conformità
• Predisporre la Documentazione Tecnica
• Redigere la Dichiarazione di Conformità che
dovrà accompagnare ogni prodotto
• Apporre la marcatura CE su ogni prodotto
• Fornire le istruzioni e le informazioni di sicurezza,
l’uso del software applicativo e la descrizione degli
accessori
Dopo la commercializzazione
• La produzione deve poter garantire il
mantenimento della conformità nel tempo
• La Documentazione Tecnica deve essere
mantenuta aggiornata
• Campionamenti nel mercato (controlli)
• Registro dei reclami o di eventuali non conformità
riscontrate dopo l’immissione nel mercato o di
richiami / ritiri del prodotto
• Intraprendere immediate azioni in caso di non
conformità, informando e collaborando con
l’Autorità nazionale
Compiti del fabbricante
14
15
Valutazione della Conformità
Requisiti Essenziali (Art. 3)
Sicurezza &
Salute (Art. 3.1a)
EMC
(Art. 3.1b)
Radio
(Art. 3.2)
Specifici
(Art. 3.3)
Tutti HS ?HS = standard armonizzato
Allegato II: Modulo A
Allegato III: Moduli B+C (ON)
Allegato IV: Modulo H (ON)
SI
Allegato III: Moduli B+C (ON)
Allegato IV: Modulo H (ON)
NO
Integrazione di moduli radio
16
Scenario Definizione Applicabilità RED
INTEGRAZIONE
MODULO RADIO
Chipset radio (o modulo radio) integrato
in un circuito o prodotto in modo
permanente
Se destinato all’immissione nel
mercato UE (anche B2B), ricade
nello scopo della RED e deve
essere approvato singolarmente
PRODOTTO
COMBINATO
Apparecchiatura radio (o modulo radio)
incorporato in modo permanente nel
prodotto ospite
Il prodotto finale è un sistema radio
combinato e si applica la direttiva
RED + altre direttive o regolamenti
pertinenti (es. DM o Automotive)
UTILIZZO IN
UN PRODOTTO
NON RADIO
Apparecchiatura radio funzionante in un
prodotto ospite senza essere incorporata
stabilmente (ad es. collegata a mezzo
USB, PCI, porta seriale, Ethernet, …)
Solo l’apparecchiatura radio rientra
nella RED; per il prodotto ospite si
adottano le pertinenti direttive
applicabili
Certificazione FCC
17
FCC
CFR 47
Part 2
Sub-part J
EMC
Part 15
Sub-part B
RadioPart 15
Sub-part COther
relevant Parts
Radio Spectrum
Unintentional Radiators
IntentionalRadiators
FCC CE
Grantee Code (Company Registration)
FCC Registration Number(Device Registration)
TCB Application NB Application
TCB Grant EU TypeCertificate
FCC EquipmentElectronic Filing System (public)
EU MemberDatabase (Private)
FCC-ID Number on device
International Approval Process
19
Planning
Documentation and legal representation
Sample preparation and testing
Submission of documentation and signing of declarations
Documentation of certifications received and renewals cycle
Research of
country
requirements
for specific
products
Provision of in-country
representation when
required
Guide on and Review of
technical file (TCF)
Contracting, scheduling, and management
of test process
Preparation of test samples and instructions
to avoid delays at the test lab
Label & Marking
20
• Each country has their own specific label and marking requirements.
• In case we have a product (for example, USB dongle) that has extremely limited space for this:
1. We will need to make a case for putting some of the markings in the user documentation and on the
packaging instead of on the product. This is a special case and must be approved by the
certification body or regulator;
2. This means we need extra time to get these approvals.