8/10/2019 L6 58130 1in 1inQuarter Mixing Valve Motor Instructions 2010-03-17

1/2

8/10/2019 L6 58130 1in 1inQuarter Mixing Valve Motor Instructions 2010-03-17

2/2

Instructions for installation

Mixing Valve Motor for 1" & 1-1/4" Valves

L658130 March 17, 2010

A BB

A

A

B

B

A

A

B

B

A

1) Turn mixing valve handle so that the mixing

valve is closed. Remove the mixing valve handleand indication gauge.

Left Hand Mounting Instructions

2) Screw in the supplied pin.

3) Push in and turn the mixing valve motor knobso that the A side is closed.

4) Remove the mixing valve motor knob by pullingit out.

5) Put the supplied plastic coupling attachmen(with grooves facing outward) into the back ofthe mixing valve motor.

6) Place the mixing valve motor onto the mixingvalve. Use the supplied mounting screw, lockingwasher, and washer to attach the mixing valvemotor to the mixing valve.

7) Push the mixing valve knob onto the mixing

valve motor so that it indicates the A side isclosed.

1) Connect the blue N wire to the common (C) terminal onthe mixing valve controller.

2) Connect the power (R) leads (open and close) from themixing valve motor to the open and close terminals on themixing valve controller.

NOTE: Ensure that power is off before making any electrical

connection! If motor is opening or closing in the wrong direction

during the test cycle, exchange the black and brownconnections (power R leads).

Electrical Installation

All wiring and installation as perapplicable local electrical codes!

M

Nblue

brown

black