l/4100 series pumps · 1r1f-a pump mounting dimensions 28 00lfd, 0lfd,1lfd, 00rfd, 0rfd, & 1rfd...

Engineering Data Pack

Excellence at work. Excellence in life.

L/4100 Series Pumps

of 32

Table of Contents

Product Overview 3

LE Standard 3

LE Metric 3

00, 0, 1, & 2LE Pump Mounting Dimensions 5

5LE Pump Mounting Dimensions 6

LSA Pump Mounting Dimensions 7

L Pump Model Number System 8

LE Pump Temperature Limits 9

Materials of Construction 9

4100/LE Cross Reference List 10

4100/LE Cross Reference List (Continued) 11

4120/LE Cross Reference List 11

4101 Pump Mounting Dimensions 12

4102-4105 Pump Mounting Dimensions 13

4108 Pump Mounting Dimensions 14

4100 Pump Model Number System 15

4100 Pump Temperature Limits 16

4100 Pump Materials of Construction 17

Viscosity Correction Factor 17

Dimensions for 30LE-2LE & 4101-4105

Close Coupled to a 48 Frame 1 Phase Motor 18







Dimensions for 5LE & 4108


Dimensions for 5LE & 4108


Dimensions for 30LE-2LE & 4101-4105 Adapter

Mounted to a 56 Frame Single & 3 Phase Motor 24

Dimensions for 30LE-2LE & 4101-4105 Adapter

Mounted to a 143/145TC Frame Single & 3 Phase Motor 25

Dimensions for 5LE & 4108 Adapter

Mounted to a 56 Frame 1 & 3 Phase Motor 26

Dimensions for 5LE, 4108 & 4128 Adapter

Mounted to a 143/145TC Frame 1 & 3 Phase Motor 27

Dimensions for LE Series Mounting Foot (0L81-C) 28

1R1F-A Pump Mounting Dimensions 28

00LFD, 0LFD,1LFD, 00RFD, 0RFD, & 1RFD

Pump Mounting Dimensions 29

2LFD & 2RFD Pump Mounting Dimensions 30

Cartridge Pump Model Number System 31

Cartridge Pump Materials of Construction 31

Model Number Locations 32

of 32

Product Overview• Positive Displacement• Internal Rotory Gear Design• Cast Iron Construction• NPT Top Ports• Mechanical Seal (Viton)• Six Sizes - 1/2 to 14 GPH• Typical Viscosity Range - 40 to 1000 SSU• Temperature to 375°F• Inlet Pressure to 250 PSI• Standard Discharge Pressure to 300 PSI

LE Standard• MOC - Cast Iron• Mechanical Seal• 6 Sizes - 0.5 to 14 GPM Nominal• Viscosity Range - 35 to 1000 SSU• Temperature to 375 °F• Pressure - 280 PSI Inlet 500 PSI Discharge• Differential Pressure - 300• 5LE - 130 Inlet 300 Discharge• #2 Fuel Oil is Limited to 100 PSI Max

Overview Options• Seal Elastomer - Neoprene or EPR• Internal Relief Valve• High Pressure Modiviation to 500 PSI Discharge• Outboard Ball Bearing for Indirect Drive• Reversing Feature• SAE Porting• Mounting Fast for Base Mount Direct Drive• Adaptor Kit for NEMA C Face Mounting• Shaft Modification for Close Coupled Mounting• Stripped Version (LSA) Consists of Cover, Idler

Gear, and Rotor Assembly for OEM Built-In Applications

LE Metric• MOC - Cast Iron• Mechanical Seal• 6 Sizes - 1.9 to 53 LPM Nominal• Viscosity Range - 35 to 1000 SSU• Temperature to 375 °F• Pressure - 19.3 BAR Inlet 34.5 BAR Discharge• Differential Pressure - 20.7 BAR• 5LE - 9 BAR Inlet 20.7 BAR Discharge• #2 Fuel Oil is Limited to 6.9 BAR Max

of 32

30LE Pump Mounting Dimensions

T

MODIFICATION "A"

30°TYP.

1 25321 25

32

Ø 2.7522.748

(3) Ø 932 MOUNTING HOLES

Ø 2.1232.121Ø 0.4361

0.4356

0.3910.388

1 1116

1516

1516

(2) 38 -18 NPT PORTS

2 2932

#404 WOODRUFF KEYWAY

21516

716

1

1 14

1 34

516

3 2732

5 532

OPTIONAL RELIEF VALVE

0.2450.243

916

1 116

4 1532

RELIEF VALVE

V - C

SHAFT END VIEW

V - CC

Rotation Rotation

PORT TYPES3/8” - 18 NPT / STD

of 32

00, 0, 1, & 2LE Pump Mounting Dimensions


(2) 12-14 NPT TAP

EE

2

C

AB

38 13

411

41

716

Ø2.1232.121

Ø0.43610.4356

0.3910.388

#404 WOODRUFF KEYWAYØ2.752

2.748

30°TYP.

FF

G

R

OPTIONALREVERSING FEATURE


Pump Model Overall LengthBi-Rotational Reversing Bi-Rot. (A) Rev. (R) B C E F G00LE 00RLE 4 15/16 5 3/16 3 15/32 3 15/32 15/16 1 29/32 3 3/320LE 0RLE 4 15/16 5 3/16 3 15/32 3 15/32 15/16 1 29/32 3 3/321LE - 5 3/32 - 3 5/8 3 5/16 15/16 1 3/4 3 1/8- 1RLE - 5 1/4 3 17/32 3 5/16 15/16 1 3/4 3 1/82LE 2RLE 5 15/16 6 1/16 4 7/16 3 5/8 15/16 1 7/8 3 1/8

REVERSING FEATURE

- LH- RH

SHAFT END VIEW

RELIEF VALVE & REVERSING FEATURE

V - CCV - C


V - LHV - RH

Rotation Rotation Rotation Rotation Rotation Rotation

Port SizePump Model

00LE 0LE 1LE 2LE00RLE 0RLE 1RLE 2RLE

1/2" - 14 NPT STD. STD. STD. STD.3/4" - 16UNF (SAE 8) OPT. OPT. OPT. OPT.

MODIFICATION "A"

0.2450.243

916

1 116

4 1532

of 32

5LE Pump Mounting Dimensions

38

41532

6 916

31116

C

U

U.S.A.CHICAGO

T

O.

1 716

518

M PHTLI L P U

1 716

(2) 1-11 12 N.P.T. PORTS

0.3910.388

Ø2.1232.121

716

1

1 14

134

Ø2.7522.748 B.C.

30°

#404 WOODRUFFKEYWAY

Ø0.43610.4356

(3) Ø 932

MOUNTING HOLES

3 732

3 316


V - CCV - C

Rotation Rotation

MODIFICATION "A"

0.2450.243

916

1 116

4 1532

PORT TYPES1” - 11 1/2 NPT / STD1 5/16” - 12 UNF (SAE16) Opt.

of 32

LSA Pump Mounting Dimensions

C

GH

CI A

UT

C

L,O I

O

L .

.

T

LIH

L UP MP

P

ØBC


716

CR

Q

Q'

N

ØU

ØX

Pump Model Overall LengthBi-Rotational Reversing Bi-Rot. (C) Rev. (R) BC N P Q Q’ U X

00RLSA 5 3/8 5 5/8 2 3/16 4 1/16 2 3/4 5/8 7/8 .4361.4356

0LSA 0RLSA 5 3/8 5 5/8 2 3/16 4 1/16 2 3/4 5/8 7/8 .4361.4356

1LSA 1RLSA 5 3/8 5 5/8 2 3/16 4 1/16 2 3/4 5/8 7/8 .4361.4356

2LSA 2RLSA 6 3/8 6 1/2 2 5/8 4 3/16 3 5/16 11/16 13/16 .4361 .4992.4356 .4987

Note: For information on recommended housing bore and bushing support please call Tuthill Pump Group.

of 32

L Pump Model Number System

Size

Feat

ure

Mod

el

Pum

p op

tions

Rota

tion

Mod

ificatio

ns

SAE P

ort

Optio

ns

Position # 1 2 3 4 5 6 7 8 9 10 11 12 13 14

Position # Description Codes1 & 2 Size -30, -00, -0, -1, -2, or -53 Reversing Feature -R (Not Available for 30 or 5 Size Models)4, 5, & 6 Model -LE or -LSA

7 Pump Options -V = Valve, -K = Outboard Ball Bearing, -U = Cover Rotated 180°, or -H = High Pressure (Not Available on 30LE or 5LE Size)

8 & 9Rotation (Valved Models) -C = Clockwise Rotation or -CC = CounterclockwiseSuction Port Location on Pumps w/ Reversing Feature -RH = Right Hand Suction or -LH = Left Hand Suction

10 Modifications -A = Tang Shaft, -5 = Neoprene Seal, -7 = Viton Seal, -8 = EPR Seal, or -N = No Flat/Keyway in Shaft

11, 12, 13, & 14 SAE Port Option -SAE8 (-NPT is Standard)

1LEV-CC

IN

LEBI-DIRECTIONAL

LEUBI-DIRECTIONAL

LEV-CCDIRECTIONAL

LEV -CDIRECTIONAL

INININ IN

RLA/RLE-LHLEFT HAND SUCTION

RLA/RLE-RHRIGHT HAND SUCTION

RLEV-RHRIGHT HAND SUCTION

RLEV-LHLEFT HAND SUCTION

IN OUTINOUT INOUTOUTIN

1.) PUMP'S MODEL NUMBER IS LOCATED IN BETWEEN THE PUMP PORTS.

2.) ROTATION AND SUCTION (IN) AND DISCHARGE (OUT) ARE STAMPED AS WELL.3.) SIZE 5 MODEL NUMBER IS STAMPED ON METAL TAG ATTACHED TO THE COVER

ININ

of 32

LE Pump Temperature Limits

500 °F

Carb

on Bu

shing

s

260 °C450 °F 232 °C400 °F

Bron

ze Bu

shing

204 °C370 °F

Viton

187 °C300 °F

Ethyle

ne Pr

opyle

ne (E

PR)

Avail

able

for 00

, 0, &

5LE S

izes O

nly

149 °C250 °F 121 °C200 °F

Neop

rene

93 °C150 °F 66 °C100 °F 38 °C50 °F 10 °C0 °F -18 °C

-10 °F -23 °C-40 °F -40 °C-50 °F -46 °C

-100 °F -73 °C

Note: A pump’s performance is dependent on more than just the temperature ranges of the component materials.

Materials of Construction

Part Name Material Standard Comments AvailabilityHousing Cast Iron ASTM A48 – 96a Classes 30, 35, or 40 Std.

Housing BushingSteel AISI 12L14 Std.Carbon Carbon Graphite Resin Std. on 5LE Pumps Only Opt.Bronze SAE 660 Available on 2L size only Std.

Cover Cast Iron ASTM A48 – 96a Classes 30, 35, or 40 Std.Rotor Steel ASTM A311 Stressproof Std.

IdlerP/M Steel MPIF-0508-P Std.Steel C1118 or C1117 Opt.Plastic PPS On 30L size only Std.

Idler Pin Steel C1117 Heat Treated Std.

Idler BushingBronze SAE 660 Std.Carbon Carbon Graphite Resin Opt.

Housing Plug Steel AISI 12L14 DU Bushing assembled in housing plug Std.

GasketsStandard Oriented Polyester Std.Standard Buna Coated Aluminum Available on 2L size only Std.

O-Rings & SealsViton STDNeoprene Opt.EPR Sizes - 00, 0 & 5LE Opt.

of 32

4100/LE Cross Reference List

4000 Series LE Pump 4100 Series Additional Features

4101 30LE- Carbon Housing Bushing vs. Cast Iron- Steel Idler Gear vs. PPS Plastic

4101K 30LEK - Same as AboveOptions: The -A-V-5-7 and 0L81-C are available on both pumps.Note: The Tuthill reversing feature is not available on either pump size.

4102 00LE- Hardened Steel Idler Gear vs. Powdered Metal- Carbon Idler Bushing vs. None- Carbon Housing Bushing vs. Steel

4102K 00LEK - Same as Above4102 00LEH - Carbon Housing Bushing vs. Steel4102K 00LET - Carbon Housing Bushing vs. SteelOptions: -R-A-V-5-7-8 and 0L81-C are available on both pumps.


4103K 0LEK - Same As Above

4103 0LEH- Carbon Idler Bushing vs. None- Carbon Housing Bushing vs. Steel

4103K 0LET- Carbon Idler Bushing vs. None- Carbon Housing Bushing vs. Steel

Options: The -R-A-V-5-7-8 and 0L81-C are available on both pumps.


4104K 1LEK - Same as Above

4104 1LEH- Carbon Idler Bushing vs. None- Carbon Housing Bushing vs. Steel

4104K 1LET- Carbon Idler Bushing vs. None- Carbon Housing Bushing vs. Steel

Options: The -R-A-V-5-7-8 and 0L81-C are available on both pumps.

of 32

4100/LE Cross Reference List (Continued)


4105 2LE- Hardened Steel Idler Gear vs. Powdered Metal- Carbon Idler Bushing vs. None- Carbon Housing Bushing vs. Bronze

4105K 2LEK - Same as Above

4105 2LEH- Carbon Idler Bushing vs. None- Carbon Housing Bushing vs. Bronze

4105K 2LET- Carbon Idler Bushing vs. None- Carbon Housing Bushing vs. Bronze

Options: The -R-A-V-5-7 and 0L81-C are available on both pumps.

4108 5LE- Hardened Steel Idler Gear vs. Powdered Metal- Carbon Idler Bushing

4108K 5LEK - Same as AboveOptions: The -A-V-5-7-8 and 0L81-C are available on both pumps.Note: The Tuthill reversing feature is not available on either pump size.

4120/LE Cross Reference List


4121-7 30LE

- Ceramic Housing Bushing vs. Cast Iron- Steel Idler Gear vs. PPS Plastic- Tutrided Cast Iron Cover vs. Cast Iron Cover- Induction Hardened Steel Rotor vs. Steel Rotor- Abrasion Resistant Mechanical Seal vs. Standard Mechanical Seal(Silicon Carbide/Ceramic vs. Carbon/Ceramic)

4122 00LE

- Ceramic Housing Bushing vs. Cast Iron- Hardened Steel Idler Gear vs. Powdered Metal- Carbon Idler Bushing vs. Bronze- Tutrided Cast Iron Cover vs. Cast Iron Cover- Induction Hardened Steel Rotor vs. Steel Rotor- Abrasion Resistant Mechanical Seal vs. Standard Mechanical Seal(Silicon Carbide/Ceramic vs. Carbon/Ceramic)

4123, 4124, & 4125 0LE, 1LE, & 2LE - Same as Above4128 5LE - Same as Above Except Ceramic Housing Bushing vs. Carbon

of 32

4101 Pump Mounting Dimensions

T

MODIFICATION "A"

30°TYP.

1 25321 25

32

Ø 2.7522.748


Ø 2.1232.121Ø 0.4361

0.4356

0.3910.388

1 1116

1516

1516

(2) 38 -18 NPT PORTS

2 2932


21516

716

1

1 14

1 34

516

3 2732

5 532


0.2450.243

916

1 116

4 1532

RELIEF VALVE

V - C

SHAFT END VIEW

V - CC

Rotation Rotation

PORT TYPES3/8” - 18 NPT / STD

of 32

4102-4105 Pump Mounting Dimensions


(2) 12 -14 NPT TAP

EE

2

C

A

B

38 1 3

41 1

41

716

Ø 2.1232.121

Ø 0.43610.4356

0.3910.388


Ø 2.7522.748

30°TYP.

FF

G


Pump Model Overall LengthBi-Rotational (A) B C E F G4102 4 15/16 3 15/32 3 15/32 15/16 1 29/32 3 3/324103 4 15/16 3 15/32 3 15/32 15/16 1 29/32 3 3/324104 5 3/32 3 5/8 3 5/16 15/16 1 3/4 3 1/84105 5 15/16 4 7/16 3 5/8 15/16 1 7/8 3 1/8

REVERSING FEATURE

- LH- RH

SHAFT END VIEW


V - CCV - C


V - LHV - RH

Rotation Rotation Rotation Rotation Rotation Rotation

Port SizePump Model

4102 4103 4104 41051/2" - 14 NPT Std. Std. Std. Std.3/4” - 16 UNF (SAE8) Opt. Opt. Opt. Opt.

MODIFICATION "A"

0.2450.243

916

1 116

4 1532

of 32

4108 Pump Mounting Dimensions

38

41532

6 916

31116

C

U

U.S.A.CHICAGO

T

O.

1 716

518

M PHTLI L P U

1 716

(2) 1-11 12 N.P.T. PORTS

0.3910.388

Ø2.1232.121

716

1

1 14

134

Ø2.7522.748 B.C.

30°

#404 WOODRUFFKEYWAY

Ø0.43610.4356

(3) Ø 932

MOUNTING HOLES

3 732

3 316


V - CCV - C

Rotation Rotation

MODIFICATION "A"

0.2450.243

916

1 116

4 1532

PORT TYPES1” - 11 1/2 NPT / STD1 5/16” - 16 UNF (SAE16) Opt.

of 32

4100 Pump Model Number System

Pum

p

Sub-

Grou

p

Size

Pum

p Op

tions

Rota

tions

Va

lved

Mod

els

Mod

ificatio

ns

Position # 1 2 3 4 5 6 7 8

Position # Description Codes1 & 2 Pump -413 Sub-Group -0 = Standard Design or -2 = Abrasion Resistant Design (Contact Factory)4 Size -1, -2, -3, -4, -5, or -85 Pump Options -V = Relief Valve, -K = Ball Bearing, or -U = Cover Rotated 180°6 & 7 Rotation (Valved Models) -C = Clockwise or -CC = Counterclockwise8 Modifications -A = Tang Shaft, -5 = Neoprene Seal, or -7 = Viton Seal

4103V-CC IN

4100/4120BI-DIRECTIONAL

4100U/4120UBI-DIRECTIONAL

4100/4120V-CCDIRECTIONAL

4100/4120V-CDIRECTIONAL

INININ IN

1.) PUMP'S MODEL NUMBER IS LOCATED IN BETWEEN THE PUMP PORTS.

2.) ROTATION AND SUCTION (IN) AND DISCHARGE (OUT) ARE STAMPED AS WELL.3.) SIZE 8 MODEL NUMBER IS STAMPED ON A METAL TAG ATTACHED TO THE COVER

ININ

of 32

4100 Pump Temperature Limits

600 °F

Cera

mic B

ushin

g ( Co

ntact

Facto

ry)

315 °C

500 °F

Carb

on Bu

shing

s

260 °C

450 °F 232 °C

400 °F 204 °C

370 °F

Viton

187 °C

350 °F 177 °C

300 °F 149 °C

250 °F 121 °C

200 °F

Neop

rene

93 °C

150 °F 66 °C

100 °F 38 °C

50 °F 10 °C

0 °F -18 °C

-10 °F -23 °C

-40 °F -40 °C

-50 °F -46 °C

-100 °F -73 °C

Notes: A pump’s performance is dependent on more than just the temperature ranges of the component materials.

of 32

4100 Pump Materials of Construction

Part Name Material Standard Comments AvailabilityHousing Cast Iron ASTM A48 – 96a Classes 30, 35, or 40 Std.

Housing BushingCarbon Carbon Graphite Resin Std.Ceramic Alumina Ceramic, Diamonite Standard on 4120 Models Opt.

CoverCast Iron ASTM A48 – 96a Classes 30, 35, or 40 Std.Cast Iron ASTM A48 – 96a Heat Treated (Standard on 4120 Models) Opt.

RotorSteel ASTM A311 Stressproof Std.

Steel ASTM A311 Stressproof and Heat Treated (Standard on 4120 Models) Opt.

IdlerSteel C1118 or C1117 Std.Plastic PPS On 4101 size only Std.

Idler Pin Steel C1117 Heat Treated Std.Idler Bushing Carbon Carbon Graphite Resin Std.Housing Plug Steel AISI 12L14 DU Bushing is assembled in housing plug Std.

GasketsStandard Oriented Polyester Std.Standard Buna Coated Aluminum Available on 2L size only Std.

O-RingsViton STDNeoprene Opt.

L/4100/Cartridge Pump NPSH Data

NPSH Required for Tuthill “L/4100/Cartridge” Series Pumps 0-1000 SSU

Pump Series NPSH (Units) 300 RPM 600 RPM 900 RPM 1200 RPM 1500 RPM 1800 RPM30L & 4101 FT. 1.0 1.7 1.9 2.1 2.300L & 4102 FT. 1.0 1.7 2.0 2.3 2.60L & 4103 FT. 1.0 1.8 2.2 2.5 2.91L & 4104 FT. 1.1 1.8 2.3 2.9 3.52L & 4105 FT. 1.1 2.3 3.0 3.8 5.8 7.05L & 4108 FT. 1.7 2.8 4.6 6.6 9.2 12.3

Notes: For liquid viscosity up to 1000 SSU. NPSHA (Net Positive Suction Head Available) must be greater than the NPSHR (Net Positive Suction Head Required) value provided in the table. Values above are for feet of liquid with a Specific Gravity of 1.0.

Viscosity Correction Factor

2500 SSU 5000 SSU 10000 SSU1.3 Correction Factor 1.7 Correction Factor 2.0 Correction Factor

of 32

Dimensions for 30LE-2LE & 4101-4105 Close Coupled to a 48 Frame 1 Phase Motor

"A"

4.002.75

12.95

Ø6.19

"B"

1/3

HP1/4

1/4

1/2

88600

MODEL #88514

88513

88516

1/60/115/230 VOLT, 1725 RPM, XPFC, 48YZ FRAME

DESCRIPTION1/60/115/230 VOLT, 1725 RPM,

TEFC, 48YZ FRAME

"A"9.60

1/60/115/230 VOLT, 1725 RPM, TEFC, 48YZ FRAME


9.60

9.60

3.00

"D""V"

"Z"

"Y"

"X"

"U"3.78

.94 .94

Ø"E"

5.75

MODEL #

"C" ASSEMBLY STYLES

5.84 4.11 6.50 .50 38

4.51"B" "C" "D"

2.507.41

WT. (LBS)"E".88 23

4.51

4.51

2.507.41

2.507.41

.88 26

.88 29

A B

C D

2.882.13 2.13

38 -18

"Z"-NPT

12 -14

12 -1412 -14

12 -14

3 3320LE & 4103 3 3

16 2 1 2332

3 13323 3

3230LE & 4101"U" "V"

3 33200LE & 4102 3 3

16

2 3321 11

16

"X" "Y"

1 23322

3 18 4 316

3 181LE & 4104 3 1132

2LE & 4105 2 1116

1 782

2

TUTHILL

of 32


"A"

"D"3.00

13.96

Ø6.19

"B"

3/4

HP1/2

1/288601

MODEL #88494

88602


DESCRIPTION1/60/115/230 VOLT, 1725 RPM,

TEFC, 56YZ FRAME

"A"9.65

1/60/115/230 VOLT, 1725 RPM, TEFC, 56YZ FRAME 11.78

3.50

"E""V"

"Z"

"Y"

"X"

"U"3.78

.94 .94

Ø"F"

6.56

"C" ASSEMBLY STYLES

6.60 4.36 4.25 6.50 44

4.00"B" "C" "D"

2.757.90WT. (LBS)"E"

4.90 33

4.252.758.68 4.51 36

A B

C D

3.282.44 2.44

"F".88

.50

.88

MODEL #38 -18

"Z"-NPT

12 -14

12 -1412 -14

12 -14

2 780LE & 4103 3 316 2 1 23

32

3 13322 15

1630LE & 4101"U" "V"

2 7800LE & 4102 3 316

2 3321 11

16

"X" "Y"

1 23322

3 132 4 3

16

2 781LE & 4104 3 1132

2LE & 4105 2 1116

1 782

2

TUTHILL

of 32


"A"

4.002.75

Ø6.19"B"

3.00

"D""V"

"Z""Y"

"X"

"U""E"

.94 .94

Ø"F"

5.75

"C"

ASSEMBLY STYLES

A B

C D

2.882.13 2.13

1/4

1/4

HP

1/3

MODEL #

88515

88603

88495

"A"DESCRIPTION3PH/50/60/190-220/380-440 VOLT,

208-230/460 VOLT, 1425/1725 RPM, TEFC, 48YZ FRAME

9.10

WT. (LBS)"F""E""D""C""B"

4.902.505.84 3.78 .88 33

1/288519

3PH/50/60/190-220/380-440 VOLT, 208-230/460 VOLT,

1425/1725 RPM, XPFC, 48YZ FRAME

3PH/50/60/190-220/380-440 VOLT, 208-230/460 VOLT,

1425/1725 RPM, TEFC, 48YZ FRAME

3PH/50/60/190-220/380-440 VOLT, 208-230/460 VOLT,


33.50-6.504.116.1012.95

33

33.88

.883.78

3.784.90

4.902.50

2.505.84

5.849.10

9.10

MODEL # "Z"-NPT

0LE & 4103

30LE & 4101"U" "V"

00LE & 4102

"X" "Y"

1LE & 4104

2LE & 4105

38-18

12-14

12-1412-14

12-14

3 332 3 3

16 2 1 2332

3 13323 3

323 3

32 3 316

2 3321 11

161 23

322

3 18 4 316

3 18 3 1132

2 1116

1 782

2

TUTHILL

of 32


"A"

"E"3.00

Ø"C""B"

3.50

"F""V"

"Z""Y"

"X"TUTHILL

"U""G"

.94 .94

Ø"H"

6.56

"D"

ASSEMBLY STYLES

A B

C D

3.282.44 2.44

3PH/50//60/190-220/380-440 VOLT, 208-230/460 VOLT,

1425/1725 RPM, TEFC, 56YZ FRAME3PH/50//60/190-220/380-440 VOLT,


3PH/50//60/190-220/380-440 VOLT, 208-230/460 VOLT,


3PH/50//60/190-220/380-440 VOLT, 208-230/460 VOLT,

1425/1725 RPM, TEFC, 56YZ FRAME88520 1/2

MODEL # HP DESCRIPTION

88521 3/4

88604 1/2

88605 1 .88

.88

.50

.88

"H"

4.516.34 6.19 4.259.78

"A" "B" "C" "E" "F"

10.36 6.83

13.96 6.60

10.36 6.83

7.19 4.50 5.20

4.256.20 6.50

4.507.19 5.20

30

WT.

36

42

36

3PH/50//60/190-220/380-440 VOLT, 208-230/460 VOLT,

1425/1725 RPM, TEFC, 56YZ FRAME11.36 6.83 7.19 4.50 5.20 .88 401 1/288606 2.84

2.84

2.84

4.36

2.75

"D"

4.19

4.19

4.19

-

3.69

"G" MODEL #38-18

"Z"-NPT

12-14

12-1412-14

12-14

3 3320LE & 4103 3 3

16 2 1 2332

3 13323 3

3230LE & 4101"U" "V"

3 33200LE & 4102 3 3

16

2 3321 11

16

"X" "Y"

1 23322

3 18 4 316

3 181LE & 4104 3 1132

2LE & 4105 2 1116

1 782

2

of 32

Dimensions for 5LE & 4108 Close Coupled to a 56 Frame 1 Phase Motor

"A"

Ø6.19

4.77

2.70

3.00

"D"

"C"

(2) 1"-11 12 PORTS Ø7.19

5.13

"E"1.44TYP.

9.06

7.19

3.50

6.503.25

2.442.44

11.78

13.961/2

1/2

HP

3/4

MODEL #

88494

88601

88602

"A"DESCRIPTION




9.65

WT. (LBS)"F""E""D""C""B"

4.25

4.00

4.25

2.75

4.36

7.90

6.60

2.758.68

4.90

6.50

.88

.50

4.51 .88

33

44

36

ASSEMBLY STYLES

A B

C D

"B"

Ø"F"

of 32

Dimensions for 5LE & 4108 Close Coupled to a 56 Frame 3 Phase Motor

"A"

Ø"C"

4.77

2.70

3.00

"E"

"D"

(2) 1"-11 12 PORTS

"G"

5.13

"F"1.44TYP.

7.19

3.50

6.563.28

2.442.44

"B"

Ø"H"

3PH/50//60/190-220/380-440 VOLT, 208-230/460 VOLT,


DESCRIPTION3PH/50//60/190-220/380-440 VOLT,


3PH/50//60/190-220/380-440 VOLT, 208-230/460 VOLT,


3PH/50//60/190-220/380-440 VOLT, 208-230/460 VOLT,


3PH/50//60/190-220/380-440 VOLT, 208-230/460 VOLT,


HP

1/2

MODEL #

88520

1

1/2

3/488521

88604

88605

1 1/288606

5.20

6.50

5.20

"F"

4.51

"B"

6.34

"A"

9.78

"D"

2.75

"C"

6.19

"E"

4.25

6.83

6.60

6.8310.36

13.96

10.36

2.84 4.507.19

4.366.20 4.25

2.847.19 4.50

"H"

.88

"G"

3.69

WT.

30

4.19 36.88

.50- 42

.884.19 36

5.206.8311.36 2.847.19 4.50 .884.19 40

ASSEMBLY STYLES

BA

C D

of 32

Dimensions for 30LE-2LE & 4101-4105 Adapter Mounted to a 56 Frame Single & 3 Phase Motor

"V"

"Z""Y"

"X"

"U"

.94 .94

MODEL #

ASSEMBLY STYLES

A B

C D

38 -18

"Z"-NPT

12-14

12-1412-14

12-14

3 3320LE & 4103 3 3

16 2 1 2332

3 13323 3

3230LE & 4101"U" "V"

3 33200LE & 4102 3 3

16

2 3321 11

16

"X" "Y"

1 23322

3 18 4 316

3 181LE & 4104 3 1132

2LE & 4105 2 1116

1 782

2

45°TYP.NAMEPLATE

2.753.00

MOTOR LENGTH VARIES DEPENDING ON MFGR.

2.44 2.44

3.50

4.44

MOTOR HEIGHT VARIES

DEPENDING ON MFGR.

DIM. TO CONDUIT BOXVARIES DEPENDING

ON MFGR.

COVER USED ONSINGLE PHASEMOTORS ONLY

of 32

Dimensions for 30LE-2LE & 4101-4105 Adapter Mounted to a 143/145TC Frame Single & 3 Phase Motor

"V"

"Z""Y"

"X"

"U"

.94 .94

MODEL #

ASSEMBLY STYLES

A B

C D

38-18

"Z"-NPT

12-14

12-1412-14

12-14

3 3320LE & 4103 3 3

16 2 1 2332

3 13323 3

3230LE & 4101"U" "V"

3 33200LE & 4102 3 3

16

2 3321 11

16

"X" "Y"

1 23322

3 18 4 316

3 181LE & 4104 3 1132

2LE & 4105 2 1116

1 782

2

45°TYP.NAMEPLATE

2.254.00 FOR 143T FRAME MOTOR


2.75 2.75

3.50

4.44

MOTOR HEIGHT VARIES

DEPENDING ON MFGR.


ON MFGR.


5.00 FOR 145T FRAME MOTOR

of 32

Dimensions for 5LE & 4108 Adapter Mounted to a 56 Frame 1 & 3 Phase Motor

3.21

ASSEMBLY STYLES

A B

C D

NAMEPLATE

2.753.00


2.44 2.44

3.50

4.44

MOTOR HEIGHT VARIES

DEPENDING ON MFGR.


ON MFGR.


1.441.44

3.69

2.704.77

(2) 1"-1112 NPT PORTS

of 32

Dimensions for 5LE, 4108 & 4128 Adapter Mounted to a 143/145TC Frame 1 & 3 Phase Motor

ASSEMBLY STYLES

A B

C D

NAMEPLATE

2.254.00 FOR 143T FRAME MOTOR


2.75 2.75

3.50

4.44

MOTOR HEIGHT VARIES

DEPENDING ON MFGR.


ON MFGR.


5.00 FOR 145T FRAME MOTOR

2.704.77

(2) 1"-1112 NPT PORTS

1.441.44

3.21

3.69

of 32

Dimensions for LE Series Mounting Foot (0L81-C)

3 58

1 716 1 7

16

38

3 12Ø 11

32

1 716

78

916 (3) 1/4-20 UNC-2B

00RF, 0RF, & 1RF Pump Mounting Dimensions

IH FC OGA

LL

C

T

R

HTU

I PUM

CO

L

.

P

45°TYP.

(4) Ø 1564

MTG. HOLES

Ø 2.0642.060 B.C.

Ø2 12

4 732

"B"

"A"

12

Ø 1.000.998Ø .4361

.4356

23°TYP.

20°TYP.

(2) 18 -27 NPT

PORTS

Ø1 78

(2) 18 -27 NPT

(EXTERNAL PORTS)

(2) Ø.25(INTERNAL PORTS)

I

Ø .4361.4356

MODIFICATION "A"

Ø .245.243

.50

.37

MODEL #

00RF 2 1732 3

"A" "B"

2 1732

2 932

0RF

1RF

3

2 2932

1R1F-A Pump Mounting Dimensions

Ø 0.43610.4356

0.2450.243

Ø 1.0000.998

38

1

2 9321 3

8

4 14

2132

22.5°22.5°

Ø 2.1892.185

Ø2 34

(4) Ø.28MOUNTING HOLES

(2) 14 -18 NPT

PORTS

of 32

00LFD, 0LFD,1LFD, 00RFD, 0RFD, & 1RFD Pump Mounting Dimensions

"S" INDICATES SUCTIONSIDE OF PUMP

2 18

4 14

1 14

2 12

S

C

.O

.L

T

IH C

C

AGO LI

ILHTU

PL MPU


1 381 3

8

(2) 12 -14 NPT

(EXTERNAL PORTS)

.245

.243

MODIFICATION "A"(2) Ø .38(INTERNAL PORTS)

38

1 14

Ø 2.1232.122

1316

1 14

1 34

31532

58

Ø .4361.4356

.391

.388

3 3132

00LFD, 0LFD, AND 1LFD00RFD, 0RFD, AND 1RFD (DIFFERENCE IN COVER)

78

78

of 32

2LFD & 2RFD Pump Mounting Dimensions

558

1 916 1 9

16

378

112

112

(4) Ø.34MOUNTING HOLES

134 13

4

MPU

OC

PLHI L

TUT

IHC

AC GOLI L .310

.308

716

1 14

MODIFICATION "A"

(2) 1"-11 12 NPT

(EXTERNAL PORTS)(2) Ø1.00 HOLES

(INTERNAL PORTS)

438

1341 1

41316

Ø2.1232.121

Ø.4992.4987

.06

12

1

41732

2LFD2RFD(DIFFERENCE IN COVER)

of 32

Cartridge Pump Model Number System

Size

Mod

el

Pum

p Op

tions

Rota

tion

Mod

ificatio

ns

Position # 1 2 3 4 5 6 7 8 9

Position # Description Codes1 & 2 Size -00, -0, -1, or -23, 4, & 5 Model -LFD or RFD

6 Pump Options -B-7 = Shaft Lip Seal (Viton), -U = Cover Rotated 180°, or (-K = Outboard Ball Bearing (Available on 00 - 1 Size LFD & RFD Models))

7 & 8 Rotation (Valved Models) -C = Clockwise Rotation or -CC = Counterclockwise9 Modifications -A = Tang Shaft, -1 = External Ports, -2 = Internal/External Ports, or -7 = Vton Seal

Note: -RF is no longer available.

Cartridge Pump Materials of Construction

Part Name Material Standard Comments AvailabilityHousing Cast Iron ASTM A48 – 96a Classes 30, 35, or 40 Std.Housing Bushing Steel AISI 12L14 Std.Cover Cast Iron ASTM A48 – 96a Classes 25, 30, 35, or 40 Std.Rotor Steel ASTM A311 Stressproof Std.Idler P/M Steel MPIF-0508-P Std.

Steel C1118 or C1117 Opt.Idler Pin Steel C1117 Heat Treated Std.Idler Bushing Bronze SAE 660 Opt.

Carbon Carbon Graphite Resin Opt.Gaskets Oriented Polyester Std.

Buna Coated Aluminum Std.Seal Viton Std.

Tuthill Pump Group12500 S. Pulaski Road, Alsip, IL 60803www.tuthillpump.com

Excellence at work. Excellence in life.

Model Number Locations

IH FC OGA

LL

C

T

R

HTU

I PUM

CO

L

.

P

I

UML PLS

UT

H

CH

T

ILGACI O

I

L.

O.

CP U T

C

C HOGC AI

T

LLI

O

PUH

LLI MP

00RF, 0RF & 1RF MODELNUMBERS STAMPED HERE

1R1F-A MODEL NUMBERSSTAMPED HERE

00LFD, 0LFD & 1LFD MODELNUMBERS STAMPED HERE

2LFD MODEL NUMBERSSTAMPED HERE

l/4100 series pumps · 1r1f-a pump mounting dimensions 28 00lfd, 0lfd,1lfd, 00rfd, 0rfd, & 1rfd...

Documents