kyoritsu automation india pvt. ltd.3.imimg.com/data3/oc/td/my-3861513/solar-cell...the automatic...
TRANSCRIPT
ARTS 1200
Automatic Tabber & Stringer
ARTS 1200 automatic tabbing / stringing machine.
The automatic tabber and stringer solder the ribbons and connect the front of one cell to the back of the other the front of one cell to the back of the other. It is developed special automatic equipment with Hot air soldering technology. This technology warrants a breakage rate lesser than 0.4%. The machine provides of 5 stations
1st station – Cell loading ,inspection & alignment2nd station – Flux dispensing3rd station – Ribbon feeding4th station – Soldering 5th station – Turnover
1.Cell loading, Inspection & Alignment
4 cells stacks(400cells loadable). Cell inspection & alignment system. Automatic cells stack change.
Model Name ARTS 1200
Solar Cell size 125x125mm up to 156 x 156mm
Cell thickness > 160㎛
Cell type 2 or 3bus bar availableCell type 2 or 3bus bar available
Bus bar interval 60~100mm
Soldering hot air
Max. String Length 1,900mm(12cells 6x6inch)
Throughput Max. 1100cells/hour, nominal 1000cells/hr
Cell Breakage < 0.40%
2.Accrute Fluxing systemFlux is dispensed to the bus bar line of the cell by spray system.
2.Ribbon FeedingThe ribbon is fed on the cells in proper length. It should be bended, cut and moved on the cell.
Cell loadingThree Loading Magazine
(max.400cells)
Cell Alignment Vision inspection & alignment
Cell Interval 2~80mm (BIPV available)
Flux dispensing spray type
String Movement By shuttle
5.TurnoverCell string passed on inspection
g y
PLC LS (other PLC available)
Control and monitoring by Touch screen
Pre-heating Zone Two zones
Turnover system included
Dimension 5000 x 1950 x 2000mm
4.Soldering The soldering station is performed by our unique hot air soldering system. 2 Preheating zones controlled by PID to protect the cell breakage.
Cell string passed on inspection are turned over and transported on a tray which can be loaded 6 strings. Automatic tray change.
Weight 2,500kg
Power consumption Max. 35KWH / work 25KWH
Air Flow / Pressure Max. 1500L/min (5.5bar)
Electricity power supply 220V, 3phase, 50/60Hz Country of Origin ; Made in Korea
Automatic Tabber & Stringer
Kyoritsu Automation India Pvt. Ltd.
Aaron Co. Ltd., Korea