kpr institute of engineering and technology, · mahindra & mahindra ltd. chennai. 8754442297,...
TRANSCRIPT
LIST OF PROGRAMS ORGANIZED
1.0 LIST OF WORKSHOP ORGANIZED:
Sl. No.
Date Name of the Programme
Topics in the session
Name of the speaker with contact details
No of participants Faculty Co-ordinator
KPRIET Others Total
1. 20/06/2018
to 21/06/2018
Two days
Workshop on 5’S
Concepts 5’S Concepts
Mrs.S.Yogeswari, Secretary, QCFI Coimbatore Chapter, Coimbatore. 9842253472, [email protected] 30 - 30 Dr.R.Saravana Kumar
Mr.A.S.Shiva Kumaran, QCFI Coimbatore Chapter, Coimbatore, 9345477697
2. 17/03/2018
One day national
level workshop
on “Awareness
in IPR”
Awareness in IPR
Dr.D.Balaji, Assistant Professor (Sl.G.) KPRIET, Coimbatore 7338714790
4 12 16 Dr.D.Balaji
3. 17/03/2018
One day national
level workshop
on “3D Printing” 3D Printing
Mr. Dhanabal, CEO, SPAAR 3D Creative, Coimbatore. 9791903763, [email protected]
61 0 61 Dr.D.Balaji
4. 12/8/2017
one day national
level workshop
on “Welding &
Welding & NDT Techniques used in Oil &
1. K.Senthil Prabhu, Managing Director, (NDT Certified Trainer), UIHMS, Coimbatore.
190 - 190 Mr.B.Arulmurugan &
Mr.D.Balaji
KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY,
Arasur, Coimbatore–641407.
(Approved by AICTE, New Delhi,
Affiliated to Anna University, Chennai)
Accredited by NBA & NAAC with ‘A’ grade
DEPARTMENT OF MECHANICAL ENGINEERING
NDT Techniques
used in Oil &
Gas Industries”
Gas Industries #9894201267 2.K.Manikandan, Engineering Expert, UIHMS, Coimbatore. #9894644890 [email protected]
5. 30/09/2016
& 1/10/2016
Two days
workshop on
“Recent Trends
In Engine
Technology &
Vehicle
Architecture”
SAE and its activities ( Automobile Systems, Job Opportunities, SAE SKIP , Internships and project funding)
Mr. Pradeep Chandrasekaran, President of SAE India Southern Section & DGM, Dimension Division, Mahindra & Mahindra Ltd, Chennai,
102 - 102 Dr.R.Saravanakumar
Mr.S.Sivalingam
Emerging trends in Automobile
Mr. Satinder Kumar Dwivedi, Senior Manager, (Engine, Brake, Transmission,Suspension), Mahindra & Mahindra Ltd. Chennai . 8754442297, [email protected]
Emerging trends in Automobile
Mr. Sathish Kumar B, Senior Manager, Body System, Mahindra & Mahindra Ltd, Chennai , 9884601982, [email protected].
SAE Baja
Mr. Srinivasan Sundaraj S, Deputy General Manager, DESIGN TO MARKETING, Mahindra & Mahindra Ltd, Chennai , 9840720337, [email protected]
6. 6/4/2016 &
7/4/2016
Two days Hands on Training in “Automotive Advancements”
i) 750 cc Single cylinder DI engine ii) 3600 cc four cylinder IDI engine iii) 2600 cc 3 cylinder engine with electronic pump
Mr.Arun.S.K, Chief Engineer, Mr.Vivek.V, General Manager, Audi, Coimbatore. 7373737620, [email protected], 7373737652, [email protected]
20 35 55 Dr.R.Saravanakumar
Mr.S.Sivalingam
7. 21/2/2016 One day Hands on Training in “IC Engines”
IC Engines
Mr.Syed Mohammad Mr.Vasanthakumar, Chief Mechanic, Force Motors, Coimbatore 7868922929
50 - 50 Dr.R.Saravanakumar
Mr.S.Sivalingam
8. 19/2/2016 &
20/2/2016
Two days workshop on “CFD”
Ansys & CFD
Mr. Shrish Shukla, Computational Mechanics Researcher & Research Fellow, Aeronautics Research and Development Board (ARDB), IIT-Delhi.
5 26 31 Mr.P.Suresh kumar
Mr.Vivekananthan
9. 12/2/2016 &
13/2/2016
Two days workshop on “Quadrotor”
Fundamental & Advancements
in “Quadrotor & Unmanned
Aerial Vehiles”
Mr.K.Gopal, Head - Roboversity, Skyfi Labs
Pvt. Ltd, Bangalore. Mobile No. 978832123
40 5 45 Mr.SP.Sathyaprasanth
Mr.S.Ambalarajan
10.22/12/2015
& 23/12/2015
Two Days Hands on Training on “Gasoline & Diesel Engine Management”
Gasoline & Diesel Engine Management
Mr.Kiran G Nair, Training Manager, Bosch Training
Centre, Chennai. 08281077223,
14 Nil 14 Mr.R.Anand kumar
11. 23/09/2015
One Day Work Shop on "Geometric Dimensioning & Tolerancing"
Geometric Dimensioning & Tolerancing
Dr.K.Ganesh, Associate Professor, Department of Mechnical Engineering, PSG Institute of Engineering & Technology, Coimbatore. 9894123331
21 23 44
Mr.Vivekanandan
Mr.D.Vinoth kumar
Mr.Boopala Krishnan
12. 19/9/2015
Inauguration of IWS student Chapter & One day National Level workshop on Welding Technology
Welding Metallurgy
Dr.Mohammed Nazurudheen, Professor, PSG College of Technology, [email protected] Coimbatore.
124 40 164 Dr.M.Manikandam
Mr.B.Arulmurugan
Welding Stress & Distortion Analysis
Dr.N.Raju, DGM, WRI, BHEL,Trichy. [email protected] 9994722100
Fundamentals of welding process& Friction Stir welding
Dr.N.Murugan, Professor, CIT, Coimbatore [email protected] 9751824123
13.28/03/2015
to 29/03/2015
Two wheeler and Four wheeler Technologies
1. IC engines 2. Gearbox 3. Clutch 4. Transmission 5. Differential
Ambal Autos training centre 84 -- 84 Mr.James Deepak D
Mr. Jayanth.D
14.6/09/2014 & 7/09/2014
Advanced IC Engine – Design and Development
2 days industry oriented skill training on IC engines
1. Dr. S. Prabaharan Consultant, Ford India 2.Mr.Praveen PrasathKV Asst. Manager, Mahindra & Mahindra 3. Mr. Rajasekaran M Asst. Manager, Hyundai Motors
103 -- 103 Mr.James Deepak D Mr.N.Vigneshkumar
15. 25/08/2014 Recent trends in IC Engines
Automobile parts and their working
1.Mr.G.Krishnamoorthi Research Scholar, IIT-Madras 2. Mr. S. Prabhu
138 -- 138 Dr.R.Saravanakumar
Mr.James Deepak D
Assistant Professor, KCT
16.27/06/2013 to 29/06/2013
CSIR Sponsored workshop on “Environmental Conscious Technology in Thermal Engineering Systems”
Different IC engine cycles and its improvement areas Heat recovery equipment and their relevance in energy savings
Dr.M.Udaya kumar Professor , Department of Mechanical Engineering, National Institute of Technology, Tiruchirappalli
27 6 33 Mr. Rajesh Kana.S Mr. Nakul Sreedhar
Exergy analysis and it utilization in daily routine
Dr.T.Sridhar Associate Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore
1. Renewable energy 2. Modes of heat transfer
Mr. Rajesh Kana.S Mr. R. Saravana Kumar Mr. G. Krishnamoorthi
17.7/03/2013 & 8/03/2013
CSIR Sponsored National level two days workshop on “TQM Practices in Indian Industries”
1. Quality 2. Basic concepts of TQM 3. Leadership and supplier partnership
Mr.H.Ramasubramaniam Senior General manager Brakes India Ltd., Chennai
46 15 51 Mr. B.Ganesh Mr. A.Saravana Kumar 1. PDSA
2. 5S 3. Kaizen 4. Six Sigma 5. Bench Marking
Mr.K.S.Srinivasan Visiting faculty Catholic University, Kenya
6. FMEA
1. Quality circles 2. Quality function Development 3. Tachuchi method 4. Need for quality 5. Case studies
Mr.R.Vasu Vice president, Brakes India Ltd., Chennai
18.20/09/2013 & 21/09/2013
CSIR Sponsored two days National workshop on “Energy efficient Mechatronics system for Industrial automation”
(i) Control Systems in Mechatronics (ii) Energy efficient Mechatronic systems in HVAC
Mr.Sekar Ramasubramaniam Chief Executive Sigma Solutions, Peelamedu, Coimbatore, 7708733266 [email protected]
84 -- 84 Mr.James Deepak D Mr. N.Vignesh Kumar
Sensors and actuators
Dr.N.Rajam Ramaswamy Associate professor, Department of Mechanical Engineering Coimbatore Institute of Technology Mobile: 9787110150 [email protected]
(i)Industrial automation - Recent trends (ii)Industrial robotics
Dr.B.Vinodh Professor & Head Department of Robotics & Automation Engg. Room No. K309, PSG College of Technology
Coimbatore- 641 004 91 98430 42223 [email protected]
Adaptive control system in CNC machines
Mr. N.Vignesh Kumar
PLC ladder diagrams
Mr.James Deepak D
PLC applications in Automated Industries.
Mr.Siva Sakthi Business development Engineer AGIIT, Peelamedu, Coimbatore. 9655758759 [email protected]
19.28/09/2012 & 29/9/2012
Mechatronics systems and their applications
Sensors, Actuators and Control Systems
Mr.Sathyamoorthy Manager, Technical, Sunrise Automation, Coimbatore
65 48 113 Mr.James Deepak D Dr.M.Sivakumar
PLC, Ladder logics, Signal conditioning
Mr.K.V.Sivasamy Chief Executive, Fullfill Electric Corporation, Coimbatore
Modeling and Simulation of Mechatronics Systems
Dr.T.Periyasamy Manager, R&D-Engines, Mahendra Research Valley, Chennai
Micro Electro Mechanical Systems (MEMS)
Dr.Bindu Salim Department of Electronics and Communication Engineering, PSG Institute of Advanced Studies, Coimbatore
CNC Mr.K. Gowrishankar, Manager
Controllers Senior Sales Manager, LMWMTD, Coimbatore
20. 31/08/2012
Design and development of jigs and fixture for advanced manufacturing industries
Design and development of jigs and fixture
Mr. Ram Prakash Holla, Managing Director, Distinct productivity Solutions, Bangalore
60 177 237 Dr. S.Sivasankaran Mr. T.Prakash
21.
24/8/2012 & 25/8/2012
Composite materials (Curriculum based Programme)
(i)Introduction and overview of composite materials and (ii)Fatigue behavior of particle and whisker reinforced composites
Dr. M. Ramachandra Bhatt, Chief Research Scientist Department of Aerospace Engineering, Indian Institute of Science, Bangalore. Phone: -22933025/22932420 Fax: -23600134, Email:- [email protected]
70 125 195 Dr. P.Sasikumar Dr.S.Sivasankaran Mr.A.Saravana Kumar
(i) Manufacturing of Polymer-Matrix Composites (ii) GFRP with graphite particulate fillers (iii) Need for low velocity impact
Dr. N. Rajesh Mathivanan, Professor Department of Mechanical Engg., P. E. S. Institute of Technology Bangalore 560 085. Mobile: 09483986569
1. Manufacturing, properties and applications of
Dr. V. Krishnaraj, Professor , Department of Mechanical Engineering, PSG College of Technology,
glass fibre, carbon fibre and Kevlar fibre. 2. Processing of polymer matrix composites
Coimbatore, Email: [email protected], Phone: 0422 4344750, Mobile No: 9788454142
(i) Composite Structures and (ii) Composite Joints
Dr.M.Senthilkumar, Professor Department of Mechanical Engineering, PSG College of Technology, Coimbatore, Email: [email protected], Phone: 0422 – 4344252, Mobile No: 9443751578
Smart Materials and its applications
Dr.K.P.Arulshri, Principal, KPR IET
Mechanics of Laminated Composites
Dr. V. Sivakumar, Professor Department of Aerospace Engineering, Amirta University, Coimbatore Campus, Email: - [email protected], Coimbatore.
(i) Thermoplastic composites (ii) Flammability behaviour of fabrics and composites
Dr. R Indu Shekar, Scientist & Additional Director, Defence Bio Engg. & Electro medical Laboratory, DEBEL, DRDO, ADE Campus, CV Raman Nagar, Bangalore 560 09.
22.
9/03/2012 & 10/03/2012
Automotive Engineering
IC Engines Mr. P.S.Gill Mentor and Research Analyst, Paramek Technologies, New Delhi
125 62 187 Mr.James Deepak D Mr.G.Krishnamoorthi
23.
7/10/2011 & 8/10/2011
Recent Trends in Composite Materials and its Processing
1. Nano materials 2. Processing of metal matrix composites 3. Casting of MMC’s
Dr.T.P.D. RAJAN Scientist E-11 Light Metals Alloys and Composites, National Institute for Interdisciplinary Science and Technology, Council of Scientific & Industrial Research, India, Thiruvananthapuram.
04 86 90 Dr. P.Sasikumar Dr.S.Sivasankaran
1. Processing of ceramic matrix composites 2. Characterization and mechanical properties of CMC’s
Dr. A. UDAYAKUMAR Scientist E-11 Materials Science Division, National Aerospace Laboratories, Post Bag NO: 1779, Airport Road, Bangalore. 560017 [email protected] [email protected]
Nanoidentification
Dr. RAMYA HARIHARAN Expert Consultant National Aerospace Laboratories, Post Bag NO: 1779, Airport Road, Bangalore. 560017
1. Polymer nanocompositer and its processing
Dr. M. RAMACHANDRA BHAT Principal Research Scientist Dr. M. RAMACHANDRA
methods 2. Fracture behavior of CFRP’s 3. NDT methods for FRP’s
BHAT Principal Research Scientist Department of Aerospace Engg., Indian Institute of Science, Bangalore
Formability of nanocomposite prepared by mechanical alloying
Dr.R.NARAYANASAMY Professor Department of Production Engg. National Institute of Technology, Tiruchirappalli
1. Processing and characterization of ultra-high temperature structural ceramic composites 2. Mechanical behavior of ceramic matrix composites
Dr. N.V. RAVI KUMAR Assistant Professor Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras
1. Processing and mechanical properties of CNT’s 2. Tribological behavior of CNT’s reinforced Aluminum matrix composites
Dr. SRINIVASA RAO BAKSHI Assistant Professor Department of Metallurgical and Materials Engineering Indian Institute of Technology Madras.
1. Deformation behavior of in-situ and ex-situ MMC’s 2. Mechanical alloying of nano composites
Dr K.SIVAPRASAD Assistant Professor Department of Metallurgical and Materials Engineering National Institute of Technology, Tiruchirappalli
Infiltration of graphite powders in resin for the fabrication of composite laminates and its properties
Prof. N. Rajesh Mathivanan Professor Department of Mechanical Engg. P. E. S. Institute of Technology, Bangalore
Natural fiber composites in resin for the fabrication of composite laminates and its properties
Dr. M. Thiru Chitrambalam, Professor and Dean Tamilnadu College of Engineering, Coimbatore.
2.0 LIST OF FACULTY DEVELOPMENT PROGRAMMES CONDUCTED:
Sl. No. Date Name of the Programme
Topics in the session
Name of the speaker with contact details
No of participants Faculty Co-ordinator
KPRIET Others Total
1. 30/06/2015
One Day
FDP on
"Solid
Works"
Advances in Solid
Works
Mr.Thirumurugan (Application
Engineer) and Mr.R.S.Mohanraj
(Asst. Manager Technical) SIM
Technologies Pvt. Ltd, New
Siddhapudur, Coimbatore.
16 - 16 Mrs.S.Maivizhi selvi
9944990174
8754572185
2. 27/06/2014
Research proposals to funding Agencies
How to write research proposals
1.Dr.Vickram Jayaram Chairman & Professor, Department of Materials Science, IISc, Bangalore 2. Dr.K.Natarajan, Emeritus Professor, Department of Chemistry, Bharathiar University, Coimbatore
81 -- 81 Dr.S.Sivasankaran Dr.R.SaravanaKumar
3. 03/06/2014 Teaching and Research
Teaching and Research
Dr.R.S.Parmar, Emeritus Professor, Indian Institute of Technology, Delhi
56 -- 56 Dr.S.Sivasankaran
4. 09/07/2012 to 13/07/2012
Engineering Drawing
Geometric construction Mr.M.Sivakumar
06 06 12 Dr. P.Sasikumar Dr.S.Sivasankaran Mr.James Deepak D
Cycloids
Tutorials Mr.A.Saravana kumar Mr.L.Rajesh Kumar
Projection of points
Dr. P.Sasikumar
Projection of lines Dr. P.Sasikumar
Projection of planes
Dr.S.Sivasankaran Mr. G.Krishnamoorthi
Tutorials Mr.T.Prakash Mr.L.Rajesh Kumar
Projection of solids
Dr.S.Sivasankaran Mr. G.Krishnamoorthi
Section of solids Dr.S.Sivasankaran Mr. G.Krishnamoorthi
Tutorials Mr.T.Prakash Mr.L.Rajesh Kumar
Development of surfaces
Dr.S.Sivasankaran Mr. D.James Deepak
Isometric projections
Mr.T.Prakash Dr.R.Saravana kumar
Tutorials Mr.A.Saravanakumar Mr.L.Rajesh Kumar
Orthographic projections
Dr.M.Sivakumar
Perspective Projections
Dr.S.Sivasankaran Mr. D.James Deepak
Tutorials Mr.A.Saravanakumar Mr.L.Rajesh Kumar
5.
10/12/2012to 14/12/2012
Heat and Mass Transfer
1. Basics of convection 2.Forced convection 3.Free convection
Dr.Madhuganesh Visiting Professor, PSG College of Technology, Coimbatore
08 04 12 Dr.R.SaravanaKumar Mr.S.Sivalingam Mr. Rajesh Kana.S
1. Phase change heat transfer 2. Heat exchangers and LMTD 3. NTU method
Dr.M.Mohanraj, Professor Department of Mechanical Engineering, INFO Institute of Engineering
1. Radiation 2. Gas radiation
Dr.A.S.Krishnan Professor Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore
1. Introduction to conduction 2. Steady and unsteady state heat transfer
Dr.Rathana Kishore Professor Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore
Tutorial Dr.R.Saravana Kumar
3.0 LIST OF SYMPOSIUM & TECHNICAL PROGRAMMES ORGANIZED:
Sl. No.
Date Name of the Programme
Topics in the session No of participants Faculty Co-ordinator
KPRIET
Others Total
1. 04/10/2017 SAE Student convention tier-1 event
1. Paper presentation
2. Quiz contest
3. CAD Modeling
4.CAD Analysis
100 - 100 Mr.S.Sivalingam Mr.R.Vignesh
2. 24/3/2017 Yantrik’17
1. Paper presentation 2. Quiz contest
3. Project Presentation 102 102
Mr.R.Vivekananthan Mr.P.Suresh kumar
3. 29/1/2016 Enthusia’16
1.Best Machinist 2.Best Molder 3.Best Engine Assembler 4.Best Designer 5.Best Welder 6.PPT by experts from Audi, Coimbatore
- 348 348 Mr.R.M.Sivaraj Mr.P.Sathyamoorthy
4. 15/8/2015
Intra Department Events (Engineers Day Celebration)
1. Quiz Competition 2. Mini Bike Display 3. Design Contest
100 Nil 100 Mr.A.Avinash Mr.R.M.Sivaraj
5. 25/03/2015
National Level project Exhibition, HEPHAESTUS`15
1. Project presentation 2. RC racing 3. Technical Quiz
45 44 89 Mr.S.Sivalingam
6. 31/01/2015 &
6/02/2015
Intra department Paper presentation
Paper presentation 67 -- 67 Mr. N.Vignesh Kumar Mr. Arul Murugan.B
7. 15/09/2014 Project Exhibition on Engineering and Technology
Project Exhibition 84 -- 84 Mr.James Deepak D Mr. A.Saravana Kumar
8. 1/03/2014 Intra department technical paper
1. Paper presentation 46 -- 46 Mr. N.Vignesh Kumar Mr.James Deepak D
presentation and Quiz contest
2. Quiz contest
9. 18/09/2013 CSIR Sponsored National Level Technical Symposium “TEKNIKRIG”
1. Paper presentation
2. Project exhibition
3. Modelling contest4.
120 37 157 Mr.James Deepak D Mr. A.Saravana Kumar
10. 14/12/2012 Manual drafting competition
1. Manual drafting
2. Quiz
100 -- 100 Mr.James Deepak D Mr. L.Rajesh Kumar
11. 15/09/2012 Project Exhibition on Engineering and Technology
Inter department project exhibition 586 -- 586 Mr.James Deepak D Mr. A.Saravana Kumar
12. 21/01/2012 Intra department technical paper presentation and Design contest
1. Paper presentation
2. Modeling contest
55 -- 55 Mr.G.Krishnamoorthi Mr. A.Saravana Kumar
13. 29/01/2011 State Level Technical Symposium ‘TEKNIKRIG’
Design Contest 19 -- 19 Mr. A.Saravana Kumar
4.0 LIST OF ENTREPRENEURSHIP DEVELOPMENT PROGRAMMES ORGANIZED:
Sl. No.
Date Name of the Programme
Topics in the session
Name of the speaker with contact details
No of participants Faculty Co-ordinator
KPRIET Others Total
1. DST sponsored three days “Entrepreneurship Awareness Camp”
Mr R. Vivekanandan
2. 15/2/2017 to 17/2/2017
DST sponsored three days “Entrepreneurship Awareness Camp”
i) Entrepreneurship
Awareness
Lectures &
activities
Er.C.K.Arivazhagan,
Soft Skill Trainer, SME
Enterprises,
Coimbatore.
78 - 78 Mr.S.P.Sathyaprasanth Mr R. Vivekanandan
ii) factory visit 9842685547
Dr. Senthil kumar CEO You Turn Aspire Coimbatore. Pon. Rathinavel Ex-Chairman rotract downtown Coimbatore
3. 11/4/16 to 13/4/16
AICTE & DST sponsored three days “Entrepreneurship Awareness Camp”
i) Entrepreneurship
Awareness
Lectures
ii)Entrepreneurship
Awareness
activities
iii)Sharing the
experience of first
generation
Entrepreneurs
Er.C.K.Arivazhagan,
Soft Skill Trainer, SME
Enterprises,
Coimbatore.
9842685547
35 - 35 Dr.P.Sasikumar Mr.S.P.Sathyaprasanth
Ms.P.Ramya, Founder,
Ara education,
Coimbatore,
9944069122,
araeducationcoimbatore
@gmail.com
N.Ramakrishnan,
9095576622,
4. 16/3/2016 to 18/3/2016
AICTE & DST sponsored three days “Entrepreneurship Awareness Camp”
i) Entrepreneurship
Awareness
Lectures
ii)Entrepreneurship
Awareness
B.Kayalvizhi , MSME
DI Assistant Director
(Food).
m, mob no: 9486114285
100 - 100 Dr.P.Sasikumar Mr.S.P.Sathyaprasanth
activities
iii)Sharing the
experience of first
generation
Entrepreneurs
Er.C.K.Arivazhagan,
Soft Skill Trainer, SME
Enterprises,
Coimbatore.
9842685547
Mr.Nadhakumar
Krishnaswamy, & NRR.
Vijayakumar, Founder,
Passion& Angel
Investor, Coimbatore,
9952752696,
nandu@founderpassion.
com
Ms.P.Ramya, Founder,
Ara education,
Coimbatore,
9944069122,
araeducationcoimbatore
@gmail.com
5. 18/9/2015 AICTE & DST sponsored Guest Lecture on "Entrepreneurial Engineers"
"How to become a successful Entrepreneur"
Mr.Navaneeth Mylsamy, M.M.Gears Private Limited, Coimbatore. 9943017774, [email protected]
130 - - Mr.Sathyamoorthy Mr.M.Sathish
6.
26/06/2015
AICTE & DST
sponsored One Day
FDP clubbed with
an Investor
Awareness
Program
Soft Skills focussed
on behavioural
changes &
Inculcate the habit
of saving and
investments
Er.C.K.Arivazhagan,
Soft Skill Trainer, SME
Enterprises,
Coimbatore.
9842685547
68 Nil 68 B.Arulmurugan & S.P.Sathyaprasanth
7. 28/03/2015 to
31/03/2015
AICTE & DST sponsored three days “Entrepreneurship Awareness Camp”
Team Building for entrepreneurs
Dr.R.Jagajeevan, Associate Professor, PSG Institute of management, Coimbatore
75 -- 75 Dr.P.Sasi Kumar
Mr.S.P.Sathya Prasanth
Mr.Arul Murugan.B
Entrepreneurship opportunities in Medical Textile
Mr.S.Thirupathi, Textile Engineer & Scientist, SITRA, Cbe
1. Behavioral changes to be a successful entrepreneur 2. Success stories of entrepreneurs
Er.C.K.Arivalazhgan Training Manager, SMEs, Coimbatore
8. 21/02/2015 One day workshop on Medical Textile
Medical Textile Mr.S.Thirupathi, Textile Engineer & Scientist, SITRA, Cbe
30 -- 30 Mr.S.P.Sathya Prasath
9. 11/08/2014 Inauguration of “Young Entrepreneurial Club”
“Opportunities For Young Entrepreneurs And Importance Of Entrepreneurship Development For Our Nation”
Mr. Vishwanathan Sahasranamam General Manager, Coimbatore Innovation & Business Incubator (CIBI), Management Consultant, Startup Coach, Innovation Strategist,
200 -- 200 Dr.S.Sivasankaran
Coimbatore.
10. 13/09/2014 One day workshop on team building and brain storming techniques for an entrepreneur
Team Building
Dr.R.Jagajeevan, Associate Professor, PSG Institute of management, Coimbatore
50 -- 50 Dr.S.Sivasankaran
11. 04/09/2014 to
06/09/2014
AICTE & DST sponsored three days “Entrepreneurship Awareness Camp”
Preparation Of A Good Project Proposals And Approaching A Bank For Loan To Become A Successful Entrepreneur
Mr.J.Vanangamudi Lead District Bank Manager, CANARA Bank.
75 -- 75 Dr.S.Sivasankaran
Roll Of Tamilnadu Industrial Investment Corporation (TIIC) For The New Entrepreneurs And Its Various Schemes Various Subsidies/Incentives To Industries
Mr.P.Gunasekaran Branch Manager, TIIC, Coimbatore
Be Your Own Boss And (Ii) Smart SME Products For Smart Businesses
Mr.S.V.Narayan Retired General Manager, State Bank of India, Coimbatore.
Steps To Start A Small Scale Industry , (Ii) Characteristic & Qualities Of Entrepreneur
Mr.V.Saravanan Krishnan Branch Manager, National Small Industries Corporation (NSIC), Coimbatore
Creativity And Idea Generation
Mr.P.Jeganathan Chief Executive Officer, Energetic Byz Plus, Coimbatore.
Man Behind The Venture - Soft Skills For Entrepreneurs
Er.C.K.Arivalazhgan Training Manager, SMEs, Coimbatore
12.
20.02.2014 & 21.02.2014
AICTE Sponsored Two Day Event on “SOFT SKILL ENRICHMENT PROGRAMME”
SOFT SKILL ENRICHMENT PROGRAMME
Er.C.K.Arivalazhgan, Training Manager SMEs, Coimbatore
40 -- 40 Dr.S.Sivasankaran
13.
21-01-2014 to
23-01-2014
AICTE sponsored three days programme on “Web design”
HTML & CSS Mr.N.Prasath, AP(CSE), KPRIET
36 -- 36 Dr.S.Sivasankaran
Javascript Mr. P.N.Senthil Prakash, AP(CSE), KPRIET
PHP Mr.T.Rajasekaran AP(CSE), KPRIET
14. 06/01/2014 to
08/01/2014
AICTE & DST sponsored three days “Entrepreneurship Awareness Camp”
Importance of entrepreneurship and opportunities for entrepreneurs
Mr N Subramaniam, Managing Director Habasit Iakoka Private Limited, Coimbatore
120 -- 120 Dr.S.Sivasankaran
Preparation of a good project proposals and approaching a bank.
Mr.J.Vanangamudi, Lead District Bank Manager CANARA Bank, R.S.Puram, Coimbatore
Role of TIIC for the new entrepreneurs and its various schemes, various subsidies/
Mr.P.Gunasekaran, Branch Manager Tamilnadu Industrial Investment Corporation (TIIC), Kurichi Branch, Coimbatore
incentives to industries
Importance of entrepreneurship for our nation
Mr. M. Kandaswami, Managing Director M/S Anandha Fabrication Pvt. Ltd, Coimbatore
Be your own boss, SME products for smart business
Mr.S.V.Narayan, Retired General Manager State Bank of India, Coimbatore
Steps to start a small scale industry, characteristic and qualities of an entrepreneur
Mr.V.Saravanan Krishnan, Branch Manager National Small Industries Corporation (NSIC), Coimbatore
How to become a successful entrepreneur
Mr.S.Prabakaran, Managing Director SPIN AQM Technologies India (P) Lt.d.
Young entrepreneurial role for our nation
Mr. Anmol Vij, Director Keyslab Software India Private Limited, Coimbatore
Man behind the venture-Soft skills for entrepreneurs
Er.C.K.Arivalazhgan, Training Manager SMEs, Coimbatore
15. 20/12/2013 &
21/12/2013
AICTE Sponsored Two Days Intensive Hands-on Training Programme on “PHOTOSHOP”
Photoshop Mr.M.Raja, Multi
Media Professional,
KVT Professional
Educational, Madurai
30 -- 30 Dr.S.Sivasankaran
16. 10/10/2013 Entrepreneurship development skills
How to become Successful & Ethical Entrepreneur and their roles for our Nation
Mr.A.Muruganantham, Managing Director and Founder, Jayaashri Industries, Coimbatore
200 -- 200 Dr.S.Sivasankaran
Paper presentation topics 1. Role of an entrepreneur in economic development of a country 2. Motivating factors required for the growth of a business enterprise. Debate Good idea and bad idea of business
17. 19/09/2013 to
21/09/2013
DST & AICTE sponsored three days “Entrepreneurship Awareness Camp”
Camp objectives, Importance of entrepreneurship –An overview
Mr.D.Jayagopal, Chairman EDP Cell – CODISSIA, Coimbatore
48 -- 48 Dr.S.Sivasankaran
Preparation of a good Project Proposals and approaching a Bank for loan to become a successful Entrepreneur
Mr.J.Vanangamudi, Lead District Bank Manager, CANARA Bank, Coimbatore
Financial aspects of small scale industry (SSI) unit including salient features of a project report
Mr.P.Gunasekaran, Branch Manager, Tamilnadu Industrial Investment Corporation (TIIC), Kurichi, Branch, Coimbatore
Importance of Entrepreneurship Development for our Nation
Mr. Vignesh Damodharaswamy, Managing Director, Ellen Group of Industries (P) Ltd, Coimbatore
Opportunities for Entrepreneurs and Banking schemes available for Entrepreneurs
Mr.S.V.Narayan, Retired General Manager, State Bank of India, Coimbatore
(i) Steps to start a small scale industry (ii) Characteristic & Qualities of Entrepreneur
Mr.V.Saravana Krishnan, Business Development Manager, National Small Industries Corporation (NSIC), Coimbatore
Historical values and Indian Values on entrepreneurship
Dr.R.Chandrasekar Menon, Professor, AEGIS Global Academy, Coimbatore
“Man behind the venture” - Soft skills for entrepreneurs
Er.C.K.Arivalazhgan Training Manager, Small Medium Enterprise (SMEs), Coimbatore
18. 04/03/2013 to
06/03/2013
DST sponsored three days “Entrepreneurship Awareness Camp”
1. Why entrepreneurship in general 2. Historical values and Indian values on entrepreneurship
Dr.R.Chandrasekar Menon Professor, AEGIS Global Academy, Coimbatore
98 -- 98 Dr.S.Sivasankaran
1. How to start a SSI 2. Technical and commercial aspects of SSI
Er.K.S.Naaganathan Project Consultant, SMEs, Coimbatore
1. Identification of business opportunities and
Mr.S.Krishna CEO, Aravinda Sai Business Ventures
mechanisms for selection of a product 2. Technology assistance from R&D labs and other institutions of choice of technology 1. Man behind the venture for soft skills for entrepreneurs 2. Positive psychology for entrepreneurs
Er.C.K.Arivalazhgan Training Manger, SMEs, Coimbatore
1. Financial aspects of SSI and project preparation 2. Schemes and assistance available by government agencies
Er.P.Rangasamy Asst.Director, DIC, Coimbatore
5.0 LIST OF SEMINAR ORGANIZED
Sl. No.
Date Name of the Programme
Topics in the session Name of the speaker with contact details
No of participants Faculty Co-ordinator
KPRIET
Others Total
1. 23/9/2015 International seminar on Career guidance and development
Career guidance and development
Ram Ramachandran, Quality Engineering specialist (Rtd.), Department of Energy, US. 900378486,
35 nil 35 Mr.A.Avinash
2. 19/03/2015 &
20/03/2015
Two days National level seminar on Finite Element Analysis
Role of CAE and Simulation in NPD
Mr. A. Gomathinayagam, Manager-Design & Analysis, L&T, Coimbatore
33 63 96 Mr. L.Prabhu
Application of FEM to Medical Applications
Dr.S.Shankar, Associate Professor, Kongu Engineering College, Perundurai
Application of FEM to Vibration problems
Dr. M.Ramu, Assistant Professor, PSG College of Technology, Coimbatore
Calculus of variation and variational formulation in FEM
Dr. K. Prabhakaran Nair, Professor, NIT, Calicut
Application of FEM in Bio Mechanics
Dr. N. Siva Shanmugam, Assistant Professor, Mechanical Engineering, NIT Trichy
Application of FEM to Structural Problems
Dr. P.R. Thyla, Associate Professor, PSG College of Technology, Coimbatore
3. 23/08/2013 & 24/08/2013
CSIR Sponsored National Seminar on “Mechanics, Processing and Characterization of high performance hybrid composite
(i) Introduction and applications of hybrid composites (ii) Hybrid Composite Shell Modeling for Morphing Application
Dr. Dinesh Kumar Harursampath, Professor, IISc, Bangalore
45 55 90 Dr. P.Sasikumar
Dr.S.Sivasankaran
(i) Processing of Hybrid Laminate Composites (ii) Drilling of Hybrid Laminate Composites
Dr. V. Krishnaraj, Associate Professor, Department of Mechanical Engineering,PSG College of Technology,
materials” Coimbatore, Email: [email protected] Phone: 0422 4344750, Mobile No: 9788454142
(i) Mechanics-Lamina constitutive Law, orthotropic & isotropic lamina, stiffness matrix, rule of mixtures (ii) Micro and macro mechanics of laminates and hybrid laminates
Dr. V.Sivakumar, Associate Professor Department of Aerospace Engineering, Amirta University, Coimbatore Campus, Email: [email protected]
(i) Fracture behavior of woven fabric hybrid composite laminates (ii) Defects and Non-destructive techniques for hybrid composites
Dr. M. Ramachandra Bhat, Chief Research Scientist Department of Aerospace Engineering, Indian Institute of Science, Bangalore. Phone: 22933025/22932420 Fax:-23600134, Email:[email protected]
4. 1/02/2013 & 2/02/2013
CSIR sponsored national seminar on “Advanced modeling techniques for heat transfer equipment and its applications
Advanced modeling and simulation techniques on vapor absorption refrigeration system models
Dr.A.Mani, Professor & head Department of R & AC, IIT Madras
24 20 44 Mr. S. Sivalingam
Enhancing heat transfer in thermal equipment and its related modeling techniques
Dr.S.Suresh, Associate Professor Department of Mechanical Engineering, National Institute of Technology,
Tiruchirappalli.
Boiler design using CFD techniques
Dr.R.Elangovan Manager/Boiler, BHEL, Tiruchirappalli
Mathematical modeling of heat transfer problems along with the use of CFD techniques in challenging heat transfer problems
Dr.Rathana Kishore Professor Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore
5. 5/10/2012 & 6/10/2012
CSIR sponsored two days national level seminar on “Processing and Mechanical Behavior of Structural Nano materials”
1. Various synthesis routes for nanostructured materials 2. Grain size and mechanical properties of nanostructured materials
Dr.T.P.D. Rajan, Scientist E-11, NIIST, CSIR, Thiruvanthapuram
20 40 60 Dr.P.Sasikumar
Dr.S.Sivasankaran
1. Fabrication of ultra-fine grained and NC materials through severe plastic deformation techniques 2. Elevated temperature deformation behavior of nano structured materials
Dr. V. Subramaniay Sarma, Associate Professor, IIT Madras
Creep behavior of microcrystalline and nano crystalline
Dr. Ashok Kumar Mondal, Assisstant Professor, NIT Rourkela
materials
Mechanical behavior of nano structural materials
Dr. A. Thirugnanam, Assistant Professor, NIT Rourkela
1. Characterization of structural nano materials 2. Structural and mechanical behavior of Nano composites
Dr. K.R.Ravi, Assistant Professor, PSG Institute of Advanced studies Coimbatore
Fabrication and tribological behavior of nano structured materials by FSP
Dr.N.Murugan, Professor, CIT Coimbatore
Synthesis, characterization and mechanical behavior of mechanically alloyed dispersion strengthened ferritic steel
Dr. R. Subramanian, Associate Professor, PSG Tech, Coimbatore
6.0 LIST OF CONFERENCE ORGANIZED: Sl. No.
Date Name of the Programme
Topics in the session
Name of the speaker with contact details
No of participants Faculty Co-ordinator
KPRIET
Others Total
1. 04/03/2016
& 05/03/2016
International Conference on “Technological
Advancements in Materials and
Manufacturing for Industrial
Modeling & Simulation of manufacturing process
Dr.S.Saikumar, Scientist G, DRDL, Hydrabad
25 175 200 Dr.K.E.K.Vimal
Dr.M.Manikandan Latest Trends in Nuclear Technology
Dr.S.Krishna kumar, Scientist G, DRDO, Chennai
Environment – TAMMIE 2016” Material
Characterization & Synthesis
Dr.Kim Ill Soo, Mokpo
National University,
South Korea
Latest Trends in Aviation Technology
Mr.M.Ganapathi, GM, Tech Mahindra, Bangalore.
2. 27/03/2015
National Conference on “Technological Advancements in
Materials and Manufacturing for
Industrial Environment –
TAMMIE 2015”
Laser surface engineering for
industrial solutions
Dr. M.Durai Selvam, Associate Professor and
Head, Department of
production engineering, National Institute of
Technology, Tiruchirappalli
78 -- 78
Dr. P.Sasikumar Mr. L.Rajesh Kumar
Mr.S.Sivalingam
3. 14/02/2013 CSIR sponsored Second National Conference on “Technological Advancements in Materials and Manufacturing for Industrial Environment – TAMMIE 2013”
Recent advancement in materials and manufacturing
Dr.M.Elangovan, Professor Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore
12 42 54 Dr. P.Sasikumar Mr. L.Rajesh Kumar
4. 16/03/2012 Technological Advancements in Materials, Manufacturing and Industrial Engineering– TAMMIE 2012
Chief guest and keynote speaker for National Conference
Dr.K.RAMESHKUMAR Professor & Chairman, Department of Mechanical Engineering, Amrita University, Coimbatore
20 24 44 Dr. P.Sasikumar Mr. L.Rajesh Kumar
7.0 LIST OF GUEST LECTURES ARRANGED
Sl. No.
Date Name of the Programme
Topics in the session
Name of the speaker with contact details
No of participants Faculty Co-ordinator
KPRIET Others Total
1. 28/02/2018 Guest Lecture
Product Development cycle
in Automobile Technology
Mr.S.Vivekanandan, Operations & Business
Development, Tiger Jump (Vehicle Tracking & Fleet
Mangement), Erode
200 - 200 Mr.Manoj kumar
2. 15/02/2018 Guest Lecture
Present Industrial Expectations
Mr. C.Ravi Raja Singh Deputy General Manager, Tools room division, Priol
Ltd, Coimbatore. [email protected]
+91 98947 99628
202 - 202 Mr.Sriram
3. 04/01/2018 Guest Lecture
Recent advancements in
CAD
Mr.K.R.Santhosh kumar, Senior Engineer, CADD
Center, Chennai, 9578087972,
202 - 202 Mr.B.Arulmurugan
4. 20/12/2017 Guest Lecture
Expectation of Industry from
Fresh Engineer
Mr.J.Jagadeesh & Mr.N.Sampath kumar, HR Manager, Roots Industries, Coimbatore, 9597776673,
[email protected], 9994343303,
202 - 202 Mr.R.Anand kumar
5. 12/08/2017 Association Inauguration
& Guest Lecture
Knowledge acquiring from books & myths
Mr.Saravanan.K, Country Manager, STM SpA, Italy
502 - 502 Mr.D.Balaji
6. 6/2/2017 Guest Lecture
Career Advancement
Studies
Mr. RajKumar, Co-Founder of ARA overseas
education, Coimbatore
124 - 124 Mr.Vivekanandhan
7. 11/1/2017 Guest Lecture
Career Competency And Internship
Awareness
Mr.VIBIN CHANDAR,
Head of ICT, Blue crest university college,
Ghanna
124 - 124 Dr.T.Laxmanan
8. 11/1/2017 Guest Lecture
Latest Trends & Job opportunities in
CAE
1) Mr.S.Kandasamy, Senior Design Engineer & Project
Manager 2) M.Sathyamoorthy, Senior
Design Engineer 3) Mr.K.Karthik, Manager,
VES Academy Private Limited, Coimbatore, 0422-
4210222
124 - 124 Mr.R.M.Sivaraj
9. 10/1/2017 Guest Lecture
“IELTS Exam Overview And How
To Score Better”
1) Mr.Anil Peruka Regional Manager, IELTS Operations & Business Development (South India) IDP Education Pvt Ltd 2. Mr. Dinesh kumar.M Business Development IDP Education India Pvt. Ltd. 1055/7,First Floor,Gowtham Centre,Avinashi Road Coimbatore – 641018, Tamilnadu
128 - 128 Mr.R.M.Sivaraj
10. 01/10/2016 Guest Lecture & ISHARE
Vapour Absorption Refrigeration
Systems
Mr.C.P.Jawahar, Students Chairman, Coimbatore Sub
Chapter,
90 - 90 Mr.N.Vignesh kumar & Mr.G.B.Amarnath
Chapter Re installation
[email protected], 7708733266
11. 29/07/2016 Guest Lecture
“Product Design & Development”
Mr.S.Velmurugan, AGM, Defence Vehicles, Ashok
Leyland, Chennai, 9940029132.
340 - 340 Mr.P.Suresh kumar
12. 27/07/2016 Guest Lecture
Lean – Six Sigma Mr. Jamal Musthafa , Director at Mastro Lee
Engineering and Management Consultants,
Coimbatore
131 - 131 Mr.S.Deepan
13. 21/07/2016 Guest Lecture
Challenges in New Product
Development
Dr.M.Natarajan, Professor & Consultant, Adithya Institute
of Technology & Franco Technology, Coimbatore,
[email protected], 9842617508
130 - 130 Mr.P.Suresh kumar & Mr.P.Udhyakumar
14. 16/07/2016 Guest Lecture
Design & Testing of Space craft Structures
Mr.P.Sathishkumar, Scientist 'E', Structures Division,
ISRO, Bangalore, 09972653988
130 - 130 Mr.B.Arulmurugan
15. 9/7/2016 Guest Lecture
Recent Trends in Automobiles
Mr. H.Ramsubramaniam Senior General Manager Advanced Engineering
Engineering Research & Development
Brakes India Limited Padi, Chennai – 600 050
E-Mail: Ramsubramaniam.H@brakes
india.co.in Mobile: 9841265493
446 - 446 Dr.S.Ramesh Babu
16. 9/7/2016 Guest Lecture &
Association inaguaration
Composite Materials Dr. A. Udayakumar Principal Scientist (Scientist
E-11) Materials Science Division, CSIR – National Aerospace
Laboratories, Bangalore. 560017
E-mail: [email protected] Mobile: 09449836811
446 - 446 Dr.S.Ramesh Babu
17. 9/7/2016 Guest Lecture &
Association inaguaration
Laser Technology Dr. M. Duraiselvam Associate Professor & Head Department of Production Engineering, National Institute of Technology, Tiruchirappalli – 620 015 E-Mail: [email protected] Mobile: 9994373486
446 - 446 Dr.S.Ramesh Babu
18. 9/7/2016 Guest Lecture &
Association inaguaration
Welding Stress & Distortion Analysis
Dr.N.Raju, DGM, WRI, BHEL,Trichy. [email protected] 9994722100
446 - 446 Dr.S.Ramesh Babu
19. 12/5/2016 Guest Lecture &
Demo
3D Printing Technology
Mr.D.Mahesh, V Engineering Solutions, Coimbatore,
9942806054 [email protected]
28 - 28 Mr.B.Arulmurugan
20. 10/3/2016 Guest Lecture
Role of Mechanical Engineering in
Planning & Execution in
Industry
Mr.S.Sankar Subramanian, Head - Plant Engineer, Roots
India Industries Pvt. Ltd., Coimbatore
156 - 156 Mr.S.Ambalarajan
21. 1/3/2016 Guest Lecture
Lean Manufacturing Mr. S R SHANKAR, Senior Lean Consultant in RG
Management consultants, Coimbatore
131 - 131 Mr.S.Deepan
22. 12/2/2016 Guest "Career Mr.V.Pradeep kumar, 35 - 35 Mr.N.Vigneh kumar
Lecture Opportunities in HVAC Design"
Managing Director, Velsons Engineers Pvt. Ltd.
Coimbatore, 9842513149, [email protected]
23. 03/10/2015 Guest Lecture &
Pre-Placement
Talk
Career Development in CAD
Mr. Sathyanarayanan, HR, USAM Technologies, Coimbatore.-641012.
Ph:0422-2524343 / 2521027 E-mail : [email protected]
120 - 120 Mr.R.Anand kumar
24. 26/9/2015 Guest Lecture
Opportunities for Mechanical Engineer
in Core Industries
Mr.Natarajan Perumal, HR, Mold Master, Coimbatore,
9787076125
100 - 100 Mr.R.Anand kumar
25. 26/9/2015 Guest Lecture
Opportunities for Mechanical Engineer
in Core Industries
Mr. Jinu Thomas, General Manager & HR, Ceasefire, Coimbatore. 9048001460
100 - 100 Mr.R.Anand kumar
26. 23/9/2015 Guest Lecture &
SAE Student Chapter
inaguaration
Role and functions of SAE
Dr.A.Ramesh,Managing committee member,SAE-
india southern section. [email protected],
9363140941
69 - 69 Mr.S.Sivalingam
27. 22/9/2015 Guest Lecture
"Role of Mechanical Engineers"
Mrs.Anuradha, Manager- Mechanical, Kavin
Engineering & Services Pvt. Ltd. Coimbatore.
[email protected], 9994389494
135 - 135 Mr.Sathish kumar Mr.V.Sathyamoorthy
28. 22/9/2015 Guest Lecture
"Personality Development"
Mr.Satis Babu Madhavan, General Manager, Business
Development, Kavin Engineering & Services Pvt.
Ltd. Coimbatore. [email protected],
9994389494
135 - 135 Mr.Sathish kumar Mr.V.Sathyamoorthy
29. 19/9/2015 Guest Lecture
Heating, Ventilation& Air
conditioning
Mr.M.Raakesh(2011– 2015 Batch Alumni)
Project Engineer,
100 - - Dr.M.Manikandan Mr.B.Arulmurugan
Siemens Ltd., Building Technologies,
SSP – Projects, Bangalore – 560 068 Mobile: 8807810108
E-mail: [email protected]
30. 19/9/2015 Guest Lecture
Recent Trends in Automobiles
Mr. H.Ramsubramaniam Senior General Manager Advanced Engineering
Engineering Research & Development
Brakes India Limited Padi, Chennai – 600 050
E-Mail: Ramsubramaniam.H@brakes
india.co.in Mobile: 9841265493
100 - - Dr.M.Manikandan
31. 19/9/2015 Guest Lecture
Composite Materials Dr. A. Udayakumar Principal Scientist (Scientist
E-11) Materials Science Division, CSIR – National Aerospace
Laboratories, Bangalore. 560017
E-mail: [email protected] Mobile: 09449836811
100 - - Dr.M.Manikandan
32. 19/9/2015 Guest Lecture
Laser Technology Dr. M. Duraiselvam Associate Professor & Head Department of Production Engineering, National Institute of Technology, Tiruchirappalli – 620 015 E-Mail: [email protected] Mobile: 9994373486
100 - - Dr.M.Manikandan
33. 14/8/2015 Reinstallation of ISHARE Students Chapter
Solar Cooling Technology
Mr.Sekar Ram, President, ISHARE Coimbatore Sub Chapter, [email protected], 9894396544
90 - 90 Mr.N.Vignesh kumar & Mr.G.B.Amarnath
Mr.C.P.Jawahar, Students Chairman, Coimbatore Sub Chapter, [email protected], 7708733266
34. 13/8/2015 Guest Lecture
Higher studies at Singapore
Roshan.K.J.M, Marketing Manager, Curtin university, Singapore. [email protected] 9871982562 +91-11 65029833
135 - 135 Mr.R.M.Sivaraj
35. 29/7/2015 Guest Lecture
Corporate mentoring for Career Development
Mr.P.Vijayakumar, Senior VP, Bull Machines Private Limited,Coimbatore. 7373788770, svpexports @bullmachine.com
266 - 266 R.Anandkumar & M.Vignesh
36. 24/7/2015 Guest Lecture
"Innovation as it being"
Mr.G.D.Rajkumar, Director, Gedee Weiler Private Limited, Coimbatore. [email protected]
472 - 472 Mr.R.M.Sivaraj & Mr. Sureshkumar
37. 15/7/2015
Guest Lecture
Opportunities in Indian Armed Forces
Lt.Esan & Prof.Anto (The Training & Placement centre, Cbe)
502 - 502 Mr.B.Arulmurugan
38. 13/7/2015
Guest Lecture
Guest lecture on "Placement and training activities"
Mr.Selvakumar Vardharajan (Head Placement & Mentoring) DJ Academy, Coimbatore. 98435-48428 Mail:[email protected]
130 - 130 R.Anandkumar & Vishal Jaiswal
39. 25/2/2015 Guest Lecture
Opportunities in Civil services
Mr.A.Gunasekaran KPR IAS Academy Cbe
413 -- 413 Mrs. V.Bhuvaneshwari
40. 11/02/2015 Guest Lecture
Overseas higher education
Mr.M. Dineshkumar Technical Head EDWISE Education
136 -- 136 Mr.James Deepak D
41. 27/01/2015 Guest Lecture
Career development in Armed Force
Lt.Esan & Prof.Anto (The Training & Placement centre, Cbe)
136 -- 136 Mr.R.M.Sivaraj
42. 29/09/2014 Guest Lecture
What industry expects from fresh engineers”
Mr. Navaneeth, Vishnu gears
140 -- 140 Mr. S. Pradeep
43. 2/09/2014 Guest Lecture
Job opportunities in “CATIA”
EDS Technologies 140 -- 140 Mr. S. Pradeep
44. 27/8/2014 Guest Lecture
Job opportunities in “Tool designing option”
NTTF Coimbatore 140 -- 140 Mr. S. Pradeep
45. 23/08/2014 Guest Lecture
New vehicle/product development
Mr. Arun Palanikumar, HR Manager-Bharat Benz
140 -- 140 Mr.James Deepak D Mr. S. Pradeep
46. 23/08/2014 Guest Lecture
Fluid mechanics Mr. G.Krishnamoorthi Research Scholar, IIT-M
139 -- 139 Mr.James Deepak D Mrs.S.Maivizhiselvi
47. 23/08/2014 Guest Lecture
Stress analysis Dr. S. Cholai Murugan, HOD/MECH, Fathima College of Engineering
139 -- 139 Mr.James Deepak D
48. 21/08/2014 Guest Lecture
New product design and development
Mr. Charath Chander Director, Cybermax Project Solutions
140 -- 140 Mr.James Deepak D
49. 14/08/2014 Guest Lecture
Importance of GATE
Mr. Arunmozhi. G Assistant Manager – Student Relations, The Gate Academy
413 -- 413 Mr.James Deepak D Mr. A.Saravana Kumar
50. 14/08/2014 Guest Lecture
Engine kinematics and dynamics
Mr.R.Balraj, Director-Technical, Arris CADD,Coimbatore
413 -- 413 Mr.James Deepak D Mr. A.Saravana Kumar
51. 14/08/2014 Guest Organization needs Mr. Laxmesh BH 413 -- 413 Mr.James Deepak D
Lecture value growing engineers
Head - Precision Manufacturing Facility, L&T Heavy machines division, Coimbatore
Mr. A.Saravana Kumar
52. 31/07/2014 Guest Lecture
Applied hydraulics and pneumatics
Mr. R. Saravanna Kumar Assistant Manager, Prolific systems
138 -- 138 Mr.James Deepak D
53. 26/07/2014 Guest Lecture
Simulation in solid works
1. S.Gokul Rangarajan, Simulation-Application lead, 2. Gokul.R Basic design engineer, SIMTEK technologies, Coimbatore
138 -- 138 Mr.James Deepak D
54. 25/07/2014 Guest Lecture & ISHRAE Inaguration
HVAC &BMS introduction program
Mr.Sekar Ramasubramaniam, Chief Executive, Sigma Solutions, Coimbatore
140 -- 140 Mr. S. Pradeep
55. 24/07/2014 Guest Lecture
Current research on metal joining process
Dr.N.Murugan, Professor, CIT Coimbatore
140 -- 140 Dr.S.Sivasankaran
56. 15/07/2014 Guest Lecture
Vehicle dynamics and vehicle design for SAE and Supra
Mr.R.Balraj, Director-Technical, Arris CADD,Coimbatore
138 -- 138 Mr.James Deepak D
57. 14/07/2014 Guest Lecture
Challenges and Opportunities towards mechanical vibrations
Dr.M.Senthilkumar, Associate Professor, PSG College of Technology, Coimbatore
140 -- 140 Dr.S.Sivasankaran
58. 7/07/2014 Guest Lecture
Industrial Automation
Mr. Sangram Deshmukh Director, Educate To Automate, Pune
140 -- 140 Mr.James Deepak D
59. 24/03/2014 Guest Lecture
Material processing, modern materials and treatment
Dr.C.SathiyaNarayanan, Associate Professor, Department of Production Engineering, National Institute of Technology, Tiruchirappalli
140 -- 140 Mrs. V.Bhuvaneshwari
60. 7/02/2014 Guest Lecture
Freshers requirements in valve industry
Mr.Badri Narayanan, Executive – HR, Velan valves India (P) Ltd., Coimbatore
72 -- 72 Mr.S.Pradeep Mr. R.Anand Kumar
61. 11/10/2013 Guest Lecture
Bridging the gap Mr.Ganesan, Manager, HR & Admin, L&T Valves,Coimbatore
62.18/09/2013
Guest Lecture
Role of a Mechanical Engineer
Mr. Milandeep Singh, Senior Design Manager, Robert Bosch
340 -- 340 Mr.James Deepak D
63. 13/09/2013 Guest Lecture
How to prepare GATE Exam
Mr.A.Saravanakumar, Director, GATEFORUM
136 -- 136 Mr.James Deepak D
64. 12/09/2013 Guest Lecture
Current industry trend in Tool design
Mr.Meenakshi Sundaram, Assistant Testing Engineer, Y NOT Engineers, Coimbatore
72 -- 72 Mr.G.Krishnamoorthi
65. 20/08/2013 Guest Lecture
Current research on metal joining process
Dr.N.Murugan, Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology
140 -- 140 Dr.S.Sivasankaran
66. 21/07/2013 Guest Lecture
Challenges of Mechanical Engineers in Indian Industries
Mr.P.Mahendran, Manager – Operations & Materials, PRICOL, Coimbatore
353 -- 353 Mr.James Deepak D
67. 20/07/2013 Guest Lecture
Opportunities and Challenges towards Mechanical Vibrations
Dr.M.Senthilkumar, Associate Professor, PSG College of Technology, Coimbatore
72 -- 72 Dr.S.Sivasankaran
68. 29/01/2013 Guest Lecture
Non-destructive testing
Mr.Sangeeth, CEO, Decibel Nde Inspection and Training Institute
72 -- 72 Mr.G.Krishnamoorthi
69. 23/01/2013 Guest Lecture
HVAC and IBMS Mr.Sekar Ramasubramaniam, Chief Executive, Sigma Solutions, Coimbatore
72 -- 72 Mr.N.Vignesh Kumar
70. 3/01/2013 Guest Lecture
Non-destructive testing
Mr.R.Baskar, Managing Director, BIT
72 -- 72 Dr.P.Sasikumar
Inspection Technology, Chennai
71. 15/09/2012 Guest Lecture
Hydraulics and Pneumatics
Dr.M.AmirthagadeeswaranProfessor & Head, Department of Mechanical Engineering, Government College of Technology, Coimbatore
72 -- 72 Mr.R.Saravana Kumar
72. 15/09/2012 Guest Lecture
Hybrid Electric vehicles
Dr.T.Periyasamy, Manager, R&D (Engines), Mahindra Industries, Chennai
72 -- 72 Mr. M.Sivakumar
73. 22/08/2012 Guest Lecture
Recent trends in Industrial Automation
M/S.Axis Global Automation 72 -- 72 Mr.C.Maxwell Rejil
74. 4/08/2012 Guest Lecture
Current research on Metal Joining Process
Dr.N.Murugan, Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology
72 -- 72 Dr.S.Sivasankaran
75. 3/08/2012 Guest Lecture
Gears and Drives Mr.K.Saravanan, Country Manager, Rossi Gears and Motors
278 -- 278 Mr. R.Anand Kumar
76. 1/08/2012 Guest Lecture
Opportunities and Challenges towards Finite Element Analysis for Mechanical Engineers
Dr.P.R.Thyla, Associate Professor, PSG College of Technology, Coimbatore
72 -- 72 Mr.L.Prabhu
77. 26/07/2012 Guest Lecture
Research problems and investigation of machining behavior of composite materials
Dr.V.Krishnaraj, Assistant Professor (Senior Grade), PSG College of Technology, Coimbatore
65 -- 65 Mr.L.Prabhu
78. 11/07/2012 Guest Lecture
Opportunities and Challenges towards Mechanical Vibrations
Dr.M.Senthilkumar, Assistant Professor, PSG College of Technology, Coimbatore
72 -- 72 Dr.S.Sivasankaran
79. 20/03/2012 Guest Lecture
Fiber reinforced plastics composites and its applications
Mr.P.Roosewelt, Reinforced Plastic Industries, Bangalore
72 -- 72 Dr.S.Sivasankaran
80. 17/03/2012 Guest Lecture
Nuclear Power Dr.N.L.Parthasarathi, Scientific Officer D, IGCAR, Kalpakkam
65 -- 65 Dr.P.Sasikumar
81. 10/01/2012 Guest Lecture
CAD/CAM/CAE Mr.Nandakumar, Product Manager, CADD Centre
72 -- 72 Mr.James Deepak D
82. 17/09/2011 Guest Lecture
IC Engines Mr.C.Prakash, General Manager, Ashok Leyland
137 -- 137 Mr.James Deepak D
83. 11/08/2011 Guest Lecture
Need for GATE Mr. N.V.Subrahmanyan, Director of TIME Institute, Coimbatore
137 -- 137 Mr.James Deepak D Mr. G.Krishnamoorthi
84. 11/08/2011 Guest Lecture
Recent developments in CNC machine tools
Mr. Ganesh Parthasarathy, CEO & Director of TUSSOR Machine Tools India Pvt. Limited, Coimbatore
137 -- 137 Mr.James Deepak D Mr. G.Krishnamoorthi
85. 19/03/2011 Guest Lecture
Engineering materials and metallurgy
Dr.R.Subramanian, Associate Professor, Department of Metallurgical Engineering, PSG College of Technology, Coimbatore
137 -- 137 Dr.P.Sasikumar
86. 19/01/2011 Guest Lecture
Laser and its applications
Dr.M.Duraiselvam, Associate Professor, Department of Production Engineering, National Institute of Technology, Tiruchirappalli
137 -- 137 Dr.P.Sasikumar
8.0 International Seminar Organized
Sl. No.
Date Name of the
Programme
Topics in the session
Name of the speaker with contact details No of participants Faculty Co-ordinator
KPRIET Others Total
1.03-08-2013
International
Seminar
International Interdisciplinary Research Seminar on “How to do Ph.D at International Standards”
1. Prof.C.Ramamoorthy, Director
(International Affairs), SGETS
2.Dr.S.Arunachalam, President, SGETS,
University of East London, UK.
49 Faculties & 8 PG students
nil 83 Dr.S.Sivasankaran
Dr.M.V.Sureshkumar