kos full assembly
TRANSCRIPT
KOS Full Assembly
Figure 1: Fully assembled KOS rev 3 including springs and cables.
Figure 2: Sub-assemblies located in the KOS rev 3 minus the 10x cables and3x springs because they are the final pieces added to the KOS.
Figure 3: Sub-assembly 1, this is just the component of the hyper fin.
Figure 4: Sub-assembly 2, this is just the component of Poseidon 3.
Figure 5: Sub-assembly 3, includes just the component Poseidon 2.
Figure 6: Sub-assembly 4, consists of components Poseidon 1 (A) and 2x Poseidon Tubes (B).
Figure 7: The spring component seen on the final assembly (Figure 1).
Figure 8: The cable components seen on the final assembly (Figure 1).
Bill of Materials for KOS rev 3
Part Quantity (# of parts)
Sub Assembly 1
Hyper Fin 1
Sub Assembly 2
Poseidon 3 1
Sun Assembly 3
Poseidon 2 1
Sub Assembly 4
Poseidon 3 1Poseidon Tube 2
Components
Cable 10Spring 3