koncept product specifi cation guide - topfituk.com · koncept product specifi cation guide...
TRANSCRIPT
Koncept Product Specifi cation GuideKitchens for Living
Koncept
The Symphony Group Plc
Pen Hill Estate,
Park Spring Road, Barnsley
South Yorkshire, S72 7EZ
Tel: 01226 446000
Fax: 01226 711185
www.symphony-group.co.uk
In keeping with our policy of continuous product development, we reserve the right
to change colours, designs, materials, descriptions or methods of manufacture.
Such changes may be made without notice and without incurring any liability.
Nothing in this publication should be considered to be part of any contract. The
illustrations included in this publication are to indicate general format and are not
necessarily correctly scaled, proportioned or detailed.
Natural wood is used in some of our kitchens. As a natural material, wood reflects
the endless variety of grains and textures found in nature and such variances can
be expected in any selection of timber fronted units. Timbers mellow when exposed
to sunlight, so a colour change can be expected.
PVC laminates and melamine finishes are also subject to slight colour change over
a period of years. Unless specified otherwise, the expression ‘solid timber’ refers
to door and drawer fronts only. A copy of our conditions of sale is available on
request. Errors and omissions excepted.
Copyright and all other rights in this brochure and the photographs and other
works upon which it is based, are owned by The Symphony Group PLC. No part
of the brochure and said photographs and other works may be reproduced or
transmitted in any form or by any means (including but not limited to photocopying
or storing in any electronic medium) without the prior express written permission
of The Symphony Group PLC.
© The Symphony Group Plc March 2011
Cert No. FM 1487
Cert No. 005
When you have fi nished with this brochure please recycle it
Creating the perfect living space
™
112409_Koncept_Product_Spec_Guide.indd 48-1 03/03/2011 12:58
02
Accessories 38 - 40
Base Open Display Units 28
Base Oven Housing 18
Base Units 18
Bi-Fold Units 20
Blender Panels 32 - 33
Boiler Housings 25
Bridging Units 20
Cabinet Specification 07 - 08
Canopies 26
Care and Attention 05
Corner Base Units 16 - 17
Corner Posts 16 & 30
Corner Sink Base Units 17
Corner Wall Units 18 - 19
Cornice and Pelmet 34
Cubic Capacities 08
Elevations 06
Filler Panels 32 - 33
Framed Glazed Units 27
Fridge/Freezer Housings 24
Friezes 30
Gallery Rails 30
General Information 04
Guidance Notes 46 - 47
Hob Units 18
Installation 44 - 45
Integrated Appliance Doors 26
Larder and Broom Units 20
Lighting 41 - 43
L Shape Corner Base Units 17
Mid Height Units 25
Ordering Checklist 03
Oven Housings 21 - 23
Peninsular Wall Units 27
Pilasters 31
Plinths 31
Shelving Panels 32 - 33
Sink Units 18 - 19
Spice Drawers 29
Standard Colour Specification 09 - 15
Wall Open Display Units 28 - 29
Wall Units 19
Waste Storage 40
Wine Racks 29
Wing End Units 30
Worktop Dresser Units 26
Worktops and Worktop
Accessories 35 - 37
IntroductionKoncept has been specifically designed to meet the needs of today’s
house builders. Manufactured from top quality materials and
hardwearing components, the cabinets will retain their good looks
and efficient operation throughout their life, when installed properly
and used under normal domestic conditions.
All dimensions in the specification document are in millimetres.
CONTENTS
112409_Koncept_Product_Spec_Guide.indd 2 03/03/2011 14:04
03
ORDERING CHECKLIST
PLEASE NOTE
• The illustrations in this booklet are intended
as representations only and are not necessarily
correctly scaled, proportioned or detailed.
• All sizes given are nominal. If exact unit, door
or other dimensions are required, please
contact your local Symphony representative
or contact Symphony’s Sales Office on 01226
446000.
• All units are manufactured within industry
standards for dimensional tolerance.
IMPORTANT
Symphony’s corner post is designed to avoid
handle clash and requires an additional
allowance in both floor space and worktop.
This is frequently overlooked, and failure to do
so will result in problems on-site.
SYMPHONY CANNOT ACCEPT RESPONSIBILITY
FOR HANDLE CLASH IF NON STANDARD
HANDLES ARE CHOSEN.
PLEASE REFER TO PAGE 17 FOR FULL DETAILS
OF CORNER ARRANGEMENTS.
If you require any additional information or
assistance please contact your local Symphony
representative or Symphony’s Sales Office on
01226 446000 or fax 01226 711185.
Please check through the list
below to ensure we have all the
information we need to supply
your exact requirements.
GENERAL
• Give details of the delivery site address,
including development names (where
applicable), site phone number and name of
site contact.
• Specify your required week commencing
delivery date.
• Give your Symphony quotation reference
number and Symphony CAD drawing number
(if applicable).
UNITS
• State the range and finish/colour of carcase
eg. Miami Pear/Pear carcase
• State 15mm Vista Standard, 15mm Vista
SoftPlus, 18mm Excel Standard or 18mm Excel
SoftPlus. For further information on cabinet
specifications please refer to pages 7 and 8.
If you require SoftClose hinges and SoftPlus
Silent Drawerbox, please ensure you state Vista
SoftPlus or Excel SoftPlus.
• State handle/trim option if applicable.
• State the full unit code for each item.
• Give the appropriate unit handings where
required. (See the notes on page 4.)
• State cornice/pelmet style.
• If 170° hinges are required (which carry an
extra cost), please specify. 110° hinges for
18mm and 15mm cabinets will be supplied as
standard. Please note that 170° hinges cannot
be used with the SoftPlus upgrade.
• Corner base units - ensure that the appropriate
codes for style and variation have been given.
(See pages 16 and 17)
• L shaped corner base units and corner wall
units are always supplied with a 170° hinge.
• Appliance housings - orders must include the
manufacturer’s name and the model number
of the appliance to be fitted, together with the
aperture size if known.
500mm DEEP UNITS
The majority of base units and broom/larder
units are also available as 500mm deep. Please
contact your local Symphony representative or
Symphony’s sales office for further details.
WORKTOPS
• State style, colour, thickness and length.
See page 35 and 37 for details.
• If your requirements are complicated,
include a detailed plan showing dimensions,
cut out positions and sizes and places where
worktops abut.
• If you require Mason Mitre Joints, please refer
to page 35. Alternatively contact your local
representative or contact Symphony’s Koncept
Sales Office on 01226 446000.
• If splays are required for base wing ends,
specify left or right hand end (see page 34).
SINK TOPS
• Give the unit code, the handing of the drainer
and the colour required (if applicable).
• Waste and overflow kits - specify if required.
• Accessory packs - specify if required.
ACCESSORIES/HANDLES
• Unless specified otherwise the “standard
option” for cornice/pelmet, handles, etc. will be
provided, see pages 9 - 15.
STAINLESS STEEL FEATURE UNITS
Available with our contemporary ranges, please
add suffix ‘XC’ when specifying stainless steel
frontals with these ranges (wall units, base units,
pan drawer units).
BOSTON BLACK ACCENT DOORS
Available with Boston and Minneapolis (chunky
steel bar handle HPK355). Please add suffix BC
when specifying (wall units, base units, pan
drawer units).
PRIMO ZEBRANO AND PRIMO NOCE ACCENT DOORS
A selection of units are available with this frontal
as an accent choice. Those not available are
marked with a • on relevant pages.
112409_Koncept_Product_Spec_Guide.indd 3 03/03/2011 14:04
04
GENERAL INFORMATION
CONSTRUCTION
15mm Vista
Side panels, bases, shelves and plinths are
manufactured from 15mm high density
chipboard. Muntins, rails and drawer support
rails on double base units are manufactured
from PVC or foil wrapped MDF. Open display
and feature units are manufactured from 18mm
high density chipboard and feature concealed
hanging brackets. All units have inset fitted backs.
Vulnerable cabinet edges are lipped to resist
moisture seepage into the panels. All units have
a white interior and colour co-ordinated exterior
cabinet which negates the need for additional
end panels. 15mm cabinets are supplied on legs
(white, pear, blonde oak, walnut, metallic, mezzo
or ivory - colour co-ordinated exterior).
18mm Excel
Side panels, bases, shelves and rails are
manufactured from 18mm high density
chipboard. Plinths are manufactured from 15mm
chipboard. Muntins and drawer support rails on
double base units are manufactured from 52mm
x 36mm section foil wrapped MDF. All units have
inset fitted backs. Vulnerable cabinet edges are
lipped to resist moisture seepage into the panels.
All 18mm cabinets are supplied on adjustable
legs. All units have fully colour co-ordinated
interior and exterior cabinets which removes
the need for additional end panels (white, pear,
blonde oak, walnut, metallic, mezzo or ivory).
Standard Colour Specification
See charts on pages 09 -15 for standard colour
specification.
Melamine Faced Chipboard
All chipboard used in manufacture complies with
BS EN 312-3(P2) and has a minimum density of
650 kilograms per cubic metre. The melamine
impregnated paper used for cabinets is 80 grams
per square metre.
Supra Drawer System
A 3 metal sided drawer box with a 15mm
chipboard base with parallel guides and a 30kg
loading capacity which complies with BS6222
Standards.
Hinges
110° 3 way adjustable hinges are fitted as
standard to all 15mm Vista units. If specified,
170° concealed hinges are available at extra cost
on both 15mm Vista and 18mm Excel Units.
Metal Fittings
All metal fittings and screws used in manufacture
are plated.
Wirework
All wirework used in the ranges is finished to
complement the cabinet colours.
SoftPlus
SoftPlus is a soft close system available as an
optional extra on 18mm Excel and 15mm Vista.
When ordering SoftPlus with 110° hinges, a soft
close drawer system and soft close hinges will be
supplied.
For SoftPlus with 170° hinges only a soft close
drawer system will be fitted (170° hinges are not
available with soft close).
Plinths
See page 31 for details and pages 11 - 16 for
standard colour specification.
Continuous plinth needs to be ordered separately.
Frontal Options
All Symphony base units are available in full
height door or door and drawer formats, with the
exception of some specialised units such as pull
out pan drawer units.
Cabinet Front Edge Lipping
All front edge lipping is co-ordinated to
exterior finish.
Worktops
Worktops are constructed from laminate bonded
to chipboard and are available in 30mm and
40mm bullnose and 40mm PVC edged styles.
Please refer to page 35 - 37 for details.
Glazed Wall Units and Feature Units
Styles of glazed units, dresser units and open
display units vary according to range. Individual
glazed doors are available in the Koncept
Brochure.
SHELF SUPPORTS
15mm Vista
Shelves are supported on white plastic injection
moulded shelf clips and transparent for glass
shelf units.
18mm Excel
Shelves are supported on metal shelf clips and are
transparent for glass shelf units.
HANDINGS
Many units are described as left or right handed.
Handings should be expressed as if looking at the
unit from the front.
Handings required are:
The side of the hinge on single units
(e.g. left hand hinged)
The side of the blanked end of corner units
(e.g. left hand blanked)
The position of the drainer on sink units
(e.g. left hand drainer)
The end position of a base wing end unit
(e.g. left hand end)
The side of a dummy drawer on a double base
unit (e.g. left hand side)
UNIT CODES
Prefix Letters
These indicate the type of unit, such as BU for
base unit; WU for wall unit; BR for broom unit;
LU for larder unit; OH for oven housing unit.
Numbers
The numbers indicate the width of the unit
followed either by the depth, or in case of wall
units, the height. For example a WU1056 is a wall
unit 1000mm wide and 561mm high. A BU56 is a
base unit 500mm wide and 600mm deep.
Suffix Letters
Any letters following the number code indicate a
variant of the type as follows:
A
B
C
D
E
F - Full height door base unit
D - Drawer line base unit
DD - Single base unit or corner base unit with a
dummy drawer
DAI - Double base unit with two dummy drawers
DAC - Double base unit with one dummy drawer
BO - Corner base unit with no corner post
BS - Corner base unit with dummy drawer and no
corner post
Unit Dimensions
All dimensions are expressed as follows:
Width - side to side
Depth - front to back
Height - top to bottom
All dimensions in this document
are shown in millimetres
TOLERANCE ALLOWANCES
Plaster allowances vary depending on the type
of finish used. Unless instructed otherwise of a
particular customer’s requirement, design will
allow 30mm per wall on dry lining and dot and
dab, 12.5mm per wall on stud walls with taped
joints, and 15mm per wall on skimmed stud
walls.
Symphony’s Design Department will allow 50mm
wall to wall building tolerance. This allows for
extra length on worktops and the distance
units finish from a wall. Where a freestanding
appliance terminates a run against a wall allow
620mm minimum for the appliance (600mm
for the appliance and 20mm for skirting boards)
plus the required building tolerance (see above
paragraph).
Variations of corner base unit or
appliance housing formats
112409_Koncept_Product_Spec_Guide.indd 4 03/03/2011 14:04
05
CARE AND ATTENTION
BACKGROUND
Symphony uses only the highest quality materials
in the production of its doors, drawer frontals and
accessories.
Symphony adheres to exacting environmental
standards, and guarantees the sustainable sources
of its timbers.
Care and Protection
It is important that you treat all frontals,
particularly timbers, with care, in order that they
maintain their good looks and performance.
If scratches do occur, an application of furniture
polish or wax will usually repair the situation.
Do not allow water to stand on timber surfaces,
always wipe off immediately.
Never use abrasive cleaners or strong chemicals
on furniture. Clean melamine and laminates with
a damp cloth, warm water and a mild detergent.
Worktops
On gloss finish worktops, scratches arising in
everyday use may be more visible due to the
greater amount of light reflected from the gloss
surface.
Cabinet/Frontal Colour Consistency
Timbers and veneers are natural materials and
are subject to the variations in colours and grain
differences that nature promotes. All timbers
feature small graining marks and knots. These are
part of the timber’s natural properties and do not
represent faults in the door or drawer.
PVC, Melamine and Laminates are synthetically
produced, therefore it is virtually impossible to
guarantee a totally accurate match between
timber/timber veneered frontals and accessories.
Symphony endeavours wherever possible to
produce the closest match that manufacturing
and finished technology allow. Timbers also
mellow over time, but as the cabinet material
does not, this could cause some longer term
colour discrepancy. A slight difference in colour
between different components does not in itself
mean that the product is not of satisfactory
quality.
Timber Characteristics
As a natural material, wood reflects the endless
variety of grains and textures found in nature
and such variances must be expected. All
timbers mellow when exposed to sunlight, so a
colour change is possible. Whilst such definitive
characteristics make them a perfect vehicle for
furniture design, it is important that you treat
them with care, and eliminate the risk of contact
with sharp or heavy objects, “scratching”,
exposure to chemicals, etc, before, during and
after installation.
Oak, particularly European oak, is a finely grained,
matured timber, notable mainly for its stability
and straight graining. It is one of the furniture
industry’s favourite timbers, and can be used in a
variety of styles and stained to a range of colours.
It is traditionally the craftsman’s ideal timber to
work with. It will however mellow with age, and
a change in colour is possible.
Birch grows largely in Northern and Eastern
Europe. It is devoid of any conspicuous structural
features but gains its character from random,
almost circular graining. In its raw state it has a
smooth, light and bright surface, easily replicated
in its finished format with the application of
durable semi matt lacquer and buffed to a sheen.
CUSTOMER CARE AND INSTALLATION
Symphony is the first furniture manufacturer to be
awarded the prestigious ISO Quality Management
System Award BS9001 2008 for its installation
and customer care operations. We now provide
our customers with a quality assurance standard
for the complete service from manufacture and
delivery of product, through to on site installation
and post completion customer care.
112409_Koncept_Product_Spec_Guide.indd 5 03/03/2011 14:04
06
ELEVATIONS
2100mm
2276mm (18mm Excel only)
NB: Base cabinet height to underside of worktop is 870mm.
Actual base unit cabinet depth is 570mm. (600mm with worktop.)
Actual wall unit cabinet depth is 285mm.
Cabinet sizes
NB: Base cabinet height to underside of worktop is 870mm. Actual base
unit cabinet depth is 470mm or 570mm (500mm or 600mm with worktop).
Actual wall unit cabinet depth is 285mm.
112409_Koncept_Product_Spec_Guide.indd 6 03/03/2011 14:04
07
GENERAL INFORMATIONCABINET SPECIFICATION
15mm Vista Cabinet
15mm Vista Wall Unit
Specification
1. 3-way fully adjustable
all-metal hinge - 110° (or
170° option) for perfect
alignment, (available with
SoftPlus hinge upgrade -
110° only)
2. 2 wall unit heights 561mm
and 724mm
3. 15mm cabinet - to BS EN
312-P2
4. Hardboard back
with horizontal fixing rail
5. Under shelf support for
strength
6. Internal cabinet finished
in white with choice of
external cabinet colours
7. 15mm shelving with plastic
shelf support
8. Co-ordinated front edge
lipping to match external
cabinet finish
15mm Vista Base Unit
Specification
1. Fully adjustable drawer front
for perfect alignment
2. 66mm void to rear providing
easy installation around
pipework and plumbing
3. Removable hardboard
back allows easy access
should a problem arise after
installation
4. 15mm RAL 9001 faced
chipboard drawer base
5. Supra durable 3 metal sided
drawer box. SoftPlus Silent
System available as an
optional extra*
6. 3-way fully adjustable all
metal hinge 110° (or 170°
option) for perfect alignment
(available with SoftPlus hinge
upgrade - 110° only).
7. 15mm cabinet - B EN 312-P2
8. Internal cabinet finished
in white with choice of
external cabinet colours
9. Cabinet lipped all round to
prevent water ingress
10. Continuous plinth
11. Optional plinth dust seal
12. Adjustable legs provide easy
installation
13. Cam and dowel construction
for extra rigidity
23
13
75
86
14
9
1210
11
1
75
8
6
43
2
Wherever you’re building, whatever the style and budget you’re working to, Symphony has a range of cabinet specifications and door styles to fit the bill.
As well as our 15mm Vista cabinet construction - tried, tested and approved by the UK’s leading specifiers - we can also provide our Excel specification,
with 18mm Excel cabinet construction, fully colour co-ordinated with wall hanging brackets.
18mm Excel Cabinet18mm Excel Wall Unit
Specification
1. Concealed fully adjustable
wall hanging brackets
2. One piece unit back
3. 2 wall unit heights
- 724mm and 900mm
4. 3-way fully adjustable all-
metal hinge - 110° (or 170°
option) for perfect alignment
(available with SoftPlus hinge
upgrade - 110° only)
5. 18mm cabinet with
interior and exterior fully
co-ordinated
6. 18mm shelving
7. Metal shelf supports
8. Cam and dowel construction
for extra rigidityWall Hanging
Bracket
12
3
5
18mm Excel Base Unit
Specification
1. Inset fitted back with void
of 66mm for easy access to
pipes, etc.
2. 15mm chipboard drawer
base
3. Fully adjustable drawer front
for perfect alignment
4. Supra durable 3 metal sided
drawer box. SoftPlus Silent
System available as optional
extra*
5. Cam and dowel construction
6. 3-way fully adjustable
all-metal hinge for perfect
alignment - 110° (or 170°
option) (available with
SoftPlus hinge upgrade -
110° only)
7. 18mm cabinet with interior
and exterior fully co-ordinated
8. Adjustable legs provide
easy installation
(min. 140mm - max.
175mm)
9. Colour co-ordinated clip-on
continuous plinth for flush
floor level fit
10. Optional plinth dust seal
11. Fully co-ordinated front edge
lipping matches cabinet
exterior
1
2
4
3
65
11
7
8 9
10
4
8
7
6
* SoftPlus Silent System SoftPlus is a soft close system which allows the opening and closing to be far quieter than standard
drawer boxes. The SoftPlus upgrade is available on both 15mm Vista and 18mm Excel cabinets.
Please contact your Symphony representative for full details.
561 units have one shelf.
724 & 900 units have two shelves.
112409_Koncept_Product_Spec_Guide.indd 7 03/03/2011 14:04
WIDTH
UNIT 300mm 400mm 450mm 500mm 600mm 800mm 900mm 1000mm 1200mm
Base Units 600mm deep 0.10 0.13 0.15 0.17 0.20 0.27 0.30 0.34 0.42
Wall Units
561mm high 0.04 0.06 0.07 0.07 0.08 0.11 0.13 0.14 -
Broom and Larder
724mm high 0.05 0.07 0.08 0.09 0.11 0.15 0.17 - -
2100mm high 0.30 - - 0.49 0.52 - - - -
Angle Corner Wall Units
561mm high - - - - 0.11 - - - -
724mm high - - - - 0.14 - - - -
Over Cooker Hood Units 300mm high - - - - 0.04 - - - -
Tall Appliance Housings 2100mm high - - - - 0.55 - - - -
8
Vista and Excel Cabinets
CABINET SPECIFICATION
Cubic Capacities (m3) 15mm Vista Cabinets
CUBIC CAPACITIES
Cubic Capacities (m3) 18mm Excel Cabinets
UNIT Hinges Cabinet thickness Cabinet colour Drawerbox Soft Close Doors
Vista
110 15mm colour exterior/white interior Supra no
170 15mm colour exterior/white interior Supra no
Vista Soft Plus
110 15mm colour exterior/white interior Supra Soft Plus yes
170 15mm colour exterior/white interior Supra Soft Plus no
Excel
110 18mm colour co-ordinated interior and exterior Supra no
170 18mm colour co-ordinated interior and exterior Supra no
Excel Soft Plus
110 18mm colour co-ordinated interior and exterior Supra Soft Plus yes
170 18mm colour co-ordinated interior and exterior Supra Soft Plus no
WIDTH
UNIT 300mm 400mm 450mm 500mm 600mm 800mm 900mm 1000mm 1200mm
Base Units 600mm deep 0.09 0.13 0.14 0.16 0.20 0.27 0.29 0.34 0.41
Wall Units
724mm high 0.05 0.06 0.07 0.08 0.10 0.14 0.16 0.18 -
Broom and Larder
900mm high 0.06 0.07 0.08 0.11 0.13 0.17 0.19 0.22 -
2100mm high 0.25 - - 0.44 0.52 - - - -
2276mm high - - - 0.48 0.63 - - - -
Angle Corner Wall Units
724mm high - - - - 0.13 - - - -
900mm high - - - - 0.17 - - - -
Over Cooker Hood Units 300mm high - - - - 0.04 - - - -
Tall Appliance Housings
2100mm high - - - - 0.54 - - - -
2276mm high - - - - 0.59 - - - -
112409_Koncept_Product_Spec_Guide.indd 8 03/03/2011 14:04
9
STANDARD COLOUR SPECIFICATION 15MM VISTA AND 18MM EXCELR
an
ge
Do
or
Fin
ish
Cab
inet
Exte
rio
r+
15m
m V
ista
Co
rner
Po
st
(incl
udin
g b
ase
and w
all s
pac
ers,
tray
space
rs,
end s
upport
pan
els
and M
FC b
ack
pan
els)
R †
Rec
om
men
ded
Colo
ur
18m
m E
xce
lC
orn
er
Po
st*
Han
dle
/Tri
m
S†Sta
ndard
A†A
ltern
ative
Co
de
Co
nti
nu
ou
s
Plin
th(O
ptional Ext
ra)
18m
m
Win
g E
nd
(L
uxu
ry)
Co
rnic
ean
d P
elm
et
(*Sta
ndard
)
Arl
ing
ton
Dijo
n W
aln
ut
MFC
Mezz
o (
R)
Mezz
oM
att
nic
kel b
ow
ed ‘
D’
han
dle
(H
PK3
67
) (S
)M
att
nic
kel l
on
g b
ar h
and
le (
HPK
21
1-2
17
) (A
)D
VZ
DLZ
Mezz
oN
/AU
niv
ersa
l M
ezzo
Foil
Au
stin
Pain
ted Ivo
ry -
Tim
ber
Finis
hIv
ory
(R)
Ivory
Sa
tin N
icke
l ‘D
’ St
rap
Han
dle
(HPK
447)
(S
)
Mat
t N
icke
l Bar
Han
dle
(H
PK2
14
) (A
)PR
VPN
VIv
ory
Iv
ory
Ivory
Foil,
Moder
n T
angen
t Fo
il Blo
nde
Oak
, Iv
ory
, M
oder
n T
angen
t V
enee
red B
londe
Oak
, Pa
inte
d Iv
ory
,
Blo
nde O
ak
Blo
nde O
ak
Satin
Nic
kel ‘
D’ St
rap
Han
dle
(HPK
447)
(S
)
Mat
t N
icke
l Bar
Han
dle
(H
PK2
14
) (A
)PR
BPIB
Blo
nde O
ak
Blo
nde O
ak
Cove
Eff
ect
Blo
nde
Oak
, Pa
inte
d
Ivory
,Univ
ersa
l Blo
nde
Oak
, Iv
ory
Tr
aditi
onal
Blo
nde
Oak
, Iv
ory
foil
Ivory
(R)
Ivory
M
att
Nic
kel B
ar H
and
le (
HPK
27
5)
(S)
Mat
t N
icke
l Wid
e B
ow
Han
dle
(H
PK2
90
) (A
)C
hu
nky
Ste
el B
ar (
HPK
35
5)
(A)
I1V
I5V
I2V
Ivory
Meta
llic
Meta
llic
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
I1M
I5M
I2M
Meta
llic
Glo
ss Ivo
ry M
DF
Waln
ut
Waln
ut
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
I1Z
I5Z
I2Z
Waln
ut
N/A
Univ
ers
al W
aln
ut,
M
eta
llic,
White,
Ivory
,M
ezz
o F
oil*
Mezz
oM
ezz
oM
att
Nic
kel B
ar H
and
le (
HPK
27
5)
(S)
Mat
t N
icke
l Wid
e B
ow
Han
dle
(H
PK2
90
) (A
)C
hu
nky
Ste
el B
ar (
HPK
35
5)
(A)
I1P
I5P
I2P
Mezz
o
White
White
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
I1W
I5W
I2W
White
Meta
llic
(R)
Meta
llic
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
R1M
R5M
R2M
Meta
llic
Bo
sto
nW
hite
White
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
R1W
R5W
R2W
White
Glo
ss R
ed
MD
FW
aln
ut
Waln
ut
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
R1N
R5N
R2N
Waln
ut
N/A
Univ
ers
al W
aln
ut,
M
eta
llic,
White,
Mezz
o F
oil*
Mezz
oM
ezz
oM
att
Nic
kel B
ar H
and
le (
HPK
27
5)
(S)
Mat
t N
icke
l Wid
e B
ow
Han
dle
(H
PK2
90
) (A
)C
hu
nky
Ste
el B
ar (
HPK
35
5)
(A)
R1Z
R5Z
R2Z
Mezz
o
Pear
Pear
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
R1P
R5P
R2P
Pear
Meta
llic
(R)
Meta
llic
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
G1M
G5M
G2M
Meta
llic
Glo
ss W
hite
MD
F
White
White
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
G1
G5
G2
White
N/A
Waln
ut
Waln
ut
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
G1N
G5N
G2N
Waln
ut
Tra
ditio
nal G
loss
White,
Univ
ers
al W
aln
ut,
M
eta
llic,
White,
Mezz
o F
oil*
Mezz
oM
ezz
oM
att
Nic
kel B
ar H
and
le (
HPK
27
5)
(S)
Mat
t N
icke
l Wid
e B
ow
Han
dle
(H
PK2
90
) (A
)C
hu
nky
Ste
el B
ar (
HPK
35
5)
(A)
G1Z
G5Z
G2Z
Mezz
o
Pear
Pear
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
G1P
G2
G6
Pear
112409_Koncept_Product_Spec_Guide.indd 9 03/03/2011 14:04
10
STANDARD COLOUR SPECIFICATION 15MM VISTA AND 18MM EXCELR
an
ge
Do
or
Fin
ish
Cab
inet
Exte
rio
r+
15m
m V
ista
Co
rner
Po
st
(incl
udin
g b
ase
and w
all s
pac
ers,
tray
space
rs,
end s
upport
pan
els
and M
FC b
ack
pan
els)
R †
Rec
om
men
ded
Colo
ur
18m
m E
xce
lC
orn
er
Po
st*
Han
dle
/Tri
m
S†Sta
ndard
A†A
ltern
ative
Co
de
Co
nti
nu
ou
s
Plin
th(O
ptional Ext
ra)
18m
m
Win
g E
nd
(L
uxu
ry)
Co
rnic
ean
d P
elm
et
(*Sta
ndard
)
Meta
llic
(R)
Meta
llic
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
B1M
B5M
B2M
Meta
llic
White
White
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
B1W
B5W
B2W
White
Glo
ss B
lack
MD
FW
aln
ut
Waln
ut
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
B1N
B5N
B2N
Waln
ut
N/A
Univ
ers
al W
aln
ut,
M
eta
llic,
White,
Mezz
o F
oil*
Mezz
oM
ezz
oM
att
Nic
kel B
ar H
and
le (
HPK
27
5)
(S)
Mat
t N
icke
l Wid
e B
ow
Han
dle
(H
PK2
90
) (A
)C
hu
nky
Ste
el B
ar (
HPK
35
5)
(A)
B1Z
B5Z
B2Z
Mezz
o
Bo
sto
n(c
on
t.)
Pear
Pear
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
B1P
B5P
B2P
Pear
Meta
llic
(R)
Meta
llic
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
L1M
L5M
L2M
Meta
llic
White
White
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
L1W
L5W
L2W
White
Glo
ss L
att
eM
DF
Waln
ut
Waln
ut
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
L1N
L5N
L2N
Waln
ut
N/A
Univ
ers
al W
aln
ut,
M
eta
llic,
White,
Mezz
o F
oil*
Mezz
oM
ezz
oM
att
Nic
kel B
ar H
and
le (
HPK
27
5)
(S)
Mat
t N
icke
l Wid
e B
ow
Han
dle
(H
PK2
90
) (A
)C
hu
nky
Ste
el B
ar (
HPK
35
5)
(A)
L1Z
L5Z
L2Z
Mezz
o
Pear
Pear
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
L1P
L5P
L2P
Pear
Bri
dg
ep
ort
Mezz
oM
DF
Mezz
oM
ezz
oM
att
Nic
kel S
oft
Fo
rmed
Han
dle
- (
HPK
33
1)
(S)
Mat
t N
icke
l Lon
g Ba
r H
andl
e -
(HPK
275,
211
-217
) (A
)
MSF
MLB
Mezz
oN
/AU
niv
ers
al
Mezz
o F
oil*
Tan
gen
t M
ezz
o F
oil
Bro
mle
yPear
MD
F
Pear
Pear
Mat
t N
icke
l Brid
ge
Han
dle
(H
PK2
51
) (S
)M
att
Nic
kel B
ow
Han
dle
(H
PK2
27
) (A
)
OF
OQ
Pear
N/A
Un
ivers
al
Pear
Foil
Tan
gen
t Pear
Foil
Oak
MD
F
Blo
nde O
ak (
R)
Blo
nde O
ak (
R)
Mat
t N
icke
l Brid
ge
Han
dle
(H
PK2
51
) (S
)M
att
Nic
kel B
ow
Han
dle
(H
PK2
27
) (A
)
LB
BLB
DBlo
nde O
ak (
R)
Un
ivers
al
Blo
nd
e O
ak F
oil*
Tan
gen
t B
lon
de O
ak F
oil
Calg
ary
Pear
MD
F
Pear
(R)
Pear
Mat
t N
icke
l Squ
are
‘D’ H
andl
e (H
PK29
6)
(S)
Mat
t N
icke
l Bow
Han
dle
(HPK
227)
(S
)X
R5T
Pear
Un
ivers
al
Pear
Foil*
Tan
gen
t Pear
Foil
White
MD
F
Pear
(R)
Pear
Mat
t Nic
kel S
quar
e ‘D
’ Han
dle
(HPK
296)
(S
)M
att N
icke
l Bow
Han
dle
(HPK
227)
(S
)X
V5V
Pear
Un
ivers
al W
hite,
Pear
Foil*
White
White
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (S
)M
att
Nic
kel W
ide
Bo
w H
and
le (
HPK
29
0)
(A)
Ch
un
ky S
teel
Bar
(H
PK 3
55
) (A
)
XT
5U
White
Dako
taBla
ck t
ext
ure
dM
FC
Meta
llic
(R)
Bla
ck t
ext
ure
dC
hro
me/
An
thra
cite
Han
dle
(H
PK4
12
) (S
)M
att
Nic
kel L
on
g B
ar H
and
le
(HPK
27
5,
21
1-2
17
) (A
)
BX
A
BX
LBla
ck t
ext
ure
dN
/AU
niv
ers
al M
eta
llic
or
Waln
ut
Foil
(horizo
nta
l gra
in)
Waln
ut
Ch
rom
e/A
nth
raci
te H
and
le (
HPK
41
2)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
BW
AB
WL
Bla
ck t
ext
ure
d
Ed
mo
nto
nIv
ory
MD
F
Blo
nde O
ak (
R)
Blo
nde O
ak
Blo
nd
e O
ak K
no
b (
HPK
39
1)
(S)
Gro
ove
d P
ewte
r H
and
le (
HPK
36
3)
(A)
IOB
IGB
Blo
nde O
ak
Blo
nde O
ak
Tangent
Blo
nde O
ak o
r Iv
ory
Fo
il* T
raditio
nal Blo
nde O
ak
or
Ivory
Foil*
Ivory
Ivory
Blo
nd
e O
ak K
no
b (
HPK
39
1)
(S)
Gro
ove
d P
ewte
r H
and
le (
HPK
36
3)
(A)
IOV
IIV
Ivory
Ivory
Un iv
ers
al Blo
nde O
ak
or
Ivory
Foil*
Cove
d B
londe O
ak
112409_Koncept_Product_Spec_Guide.indd 10 03/03/2011 14:04
STANDARD COLOUR SPECIFICATION 15MM VISTA AND 18MM EXCEL
11
Ran
ge
Do
or
Fin
ish
Cab
inet
Exte
rio
r+
15m
m V
ista
Co
rner
Po
st
(incl
udin
g b
ase
and w
all s
pac
ers,
tray
space
rs,
end s
upport
pan
els
and M
FC b
ack
pan
els)
R †
Rec
om
men
ded
Colo
ur
18m
m E
xce
lC
orn
er
Po
st*
Han
dle
/Tri
m
S†Sta
ndard
A†A
ltern
ative
Co
de
Co
nti
nu
ou
s
Plin
th(O
ptional Ext
ra)
18m
m
Win
g E
nd
(L
uxu
ry)
Co
rnic
ean
d P
elm
et
(*Sta
ndard
)
Galw
ay
Pearw
ood
MFC
Pear
(R)
Pear
Mat
t Nic
kel S
quar
e ‘D
’ Han
dle
(HPK
296)
(S
)M
att N
icke
l Bow
Han
dle
(HPK
227)
(S
)R
QEU
QH
Pear
N/A
Un
ivers
al Pear
Foil*
Apple
MFC
Pear
(R)
Pear
woo
d/M
att
Nic
kel ‘
D’
Han
dle
(HPK
421)
(S
)M
att
Nic
kel ‘
D’
Han
dle
(HPK
181)
(A
)M
att
Nic
kel B
ar H
andl
e (H
PK27
5)
(A)
NL
NJ
QI
Un
ivers
al Pear
Foil*
Geo
rgia
Mezz
oM
DF
Mezz
o (
R)
Mezz
oG
roo
ved
Pew
ter
Han
dle
(H
PK3
63
) (S
)M
att
Nic
kel B
ar H
and
le (
HPK
27
5)
(A)
Satin
Bo
w H
and
le (
HPK
43
3)
(A)
Bru
shed
Nic
kel C
uto
ut
‘D’
Han
dle
(H
PK4
08
) (A
)
MG
HM
NH
MSZ
MC
Z
Mezz
oN
/AU
niv
ers
al M
ezz
o F
oil
Tangent
Mezz
o F
oil*
Maple
MD
F
Pear
Maple
Gro
ove
d P
ewte
r H
and
le (
HPK
36
3)
(S)
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (A
)Sa
tin
Bo
w H
and
le (
HPK
43
3)
(A)
Bru
shed
Nic
kel C
uto
ut
‘D’
Han
dle
(H
PK4
08
) (A
)
MG
RM
KP
MA
KM
UD
Pear
N/A
Un
ivers
al Pear
Foil*
Tangent
Maple
Foli
Oak
MD
F
Blo
nde O
ak
Blo
nde O
ak
Gro
ove
d P
ewte
r H
and
le (
HPK
36
3)
(S)
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (A
)Sa
tin
Bo
w H
and
le (
HPK
43
3)
(A)
Bru
shed
Nic
kel C
uto
ut
‘D’
Han
dle
(H
PK4
08
) (A
)
BG
RB
LN
BSO
BQ
B
Blo
nde O
ak
N/A
Un
ivers
al Blo
nde O
ak F
oil*
Tangent
Blo
nde O
ak F
oli
Waln
ut
MD
F
Waln
ut
Waln
ut
Gro
ove
d P
ewte
r H
and
le (
HPK
36
3)
(S)
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (A
)Sa
tin
Bo
w H
and
le (
HPK
43
3)
(A)
Bru
shed
Nic
kel C
uto
ut
‘D’
Han
dle
(H
PK4
08
) (A
)
WR
WW
AW
WLA
WC
Q
Waln
ut
N/A
Un
ivers
al W
aln
ut
Foil*
Tangent
Waln
ut
Foli
Haci
en
da
White A
sh M
FC(h
orizo
nta
l gra
in)
White (
R)
White A
shA
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
Bru
shed
Ste
el A
rch
han
dle
(H
PK4
30
) (A
)
AFW
ALW
ASW
White (
R)
N/A
Univ
ers
al W
hite
or
Meta
llic
Foil
Meta
llic
White A
shA
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (S
) M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)B
rush
ed S
teel
Arc
h h
and
le (
HPK
43
0)
(A)
AFM
ALM
ASM
Meta
llic
(R)
Cham
pagne M
FC
(horizo
nta
l gra
in)
Ivory
(R)
Cham
pagne
Alu
min
ium
fla
t ‘D
’ h
and
le (
HPK
37
1)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
,21
1-2
17
) (A
)B
rush
ed S
teel
Arc
h h
and
le (
HPK
43
0)
(A)
CFV
CLV
CSV
Ivory
N/A
Univ
ers
al Iv
ory
or
Waln
ut
Foil
Waln
ut
Cham
pagne
Alu
min
ium
fla
t ‘D
’ h
and
le (
HPK
37
1)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
,21
1-2
17
) (A
)B
rush
ed S
teel
Arc
h h
and
le (
HPK
43
0)
(A)
CFN
CLN
CC
N
Waln
ut
Ivory
MFC
(h
orizo
nta
l gra
in)
Ivory
(R)
Ivory
Alu
min
ium
fla
t ‘D
’ h
and
le (
HPK
37
1)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
,21
1-2
17
) (A
)B
rush
ed S
teel
Arc
h h
and
le (
HPK
43
0
(A)
VFV
IXV
VSV
Ivory
N/A
Univ
ers
al Iv
ory
or
Waln
ut
Foil
Waln
ut
Waln
ut
Alu
min
ium
fla
t ‘D
’ h
and
le (
HPK
37
1)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
,21
1-2
17
) (A
)B
rush
ed S
teel
Arc
h h
and
le (
HPK
43
0)
(A)
VFN
IXN
VSN
Waln
ut
Havan
aD
ark
Oliv
ewo
od
MFC
(horizo
nta
l gra
in)
Waln
ut
(R)
Waln
ut
Tita
niu
m B
ow
Han
dle
(H
PK4
13
) (S
)M
att
Nic
kel L
on
g B
ar H
and
le
(HPK
27
5,
21
1-2
17
) (A
)
DB
ND
LN
Pear
N/A
Un
ivers
al Pear
Foil*
Meta
llic
Meta
llic
Tita
niu
m B
ow
Han
dle
(H
PK4
13
) (S
)M
att
Nic
kel L
on
g B
ar H
and
le
(HPK
27
5,
21
1-2
17
) (A
)
DB
MD
LM
Un
ivers
al M
eta
llic
Foil*
Hu
dso
nBlo
nde O
ak M
FC(h
orizo
nta
l gra
in)
Blo
nde O
ak (
R)
Blo
nde O
ak
Mat
t N
icke
l Wid
e B
ow
Han
dle
(H
PK2
90
) (S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,2
11
-21
7)
(A)
BW
BB
OB
Blo
nde O
ak
N/A
Univ
ers
al Blo
nde O
ak F
oil*
Tangent
Blo
nde O
ak F
oil
112409_Koncept_Product_Spec_Guide.indd 11 03/03/2011 14:04
12
STANDARD COLOUR SPECIFICATION 15MM VISTA AND 18MM EXCELR
an
ge
Do
or
Fin
ish
Cab
inet
Exte
rio
r+
15m
m V
ista
Co
rner
Po
st
(incl
udin
g b
ase
and w
all s
pac
ers,
tray
space
rs,
end s
upport
pan
els
and M
FC b
ack
pan
els)
R †
Rec
om
men
ded
Colo
ur
18m
m E
xce
lC
orn
er
Po
st*
Han
dle
/Tri
m
S†Sta
ndard
A†A
ltern
ative
Co
de
Co
nti
nu
ou
s
Plin
th(O
ptional Ext
ra)
18m
m
Win
g E
nd
(L
uxu
ry)
Co
rnic
ean
d P
elm
et
(*Sta
ndard
)
Mad
iso
n Sand Z
ebra
no M
FC(h
orizo
nta
l gra
in)
Pear
(R)
Sand Z
ebra
no
Bru
shed
Nic
kel C
ut
Ou
t H
and
le (
HPK
40
8)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(A
)(H
PK2
75
, 2
11
-21
7)
SZH
SZI
Pear
(R)
N/A
Univ
ers
al Pear
or
Meta
llic
Foil
Meta
llic
Bru
shed
Nic
kel C
ut
Ou
t H
and
le (
HPK
40
8)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(A
)(H
PK2
75
, 2
11
-21
7)
SZJ
SZK
Meta
llic
Coco
bolo
MFC
(horizo
nta
l gra
in)
Waln
ut
(R)
Coco
bolo
Bru
shed
Nic
kel C
ut
Ou
t H
and
le (
HPK
40
8)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(A
)(H
PK2
75
, 2
11
-21
7)
CO
DC
OE
Waln
ut
(R)
N/A
Univ
ers
al W
aln
ut
or
Meta
llic
Foil
Meta
llic
Bru
shed
Nic
kel C
ut
Ou
t H
and
le (
HPK
40
8)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(A
)(H
PK2
75
, 2
11
-21
7)
CO
HC
OI
Meta
llic
Med
ford
White
MFC
White
White
Bru
shed
St
eel A
rch
Han
dle
HPK
43
0)
(S)
Mat
t N
icke
l Bar
Han
dle
(H
PK2
75
) (A
)H
SW
WLW
White
N/A
Un
ivers
al W
hite F
oil*
Pear
MD
F
Pear
(R)
Pear
Matt
Nic
kel Pull
Handle
(H
PK
276)
(S
)M
att
Nic
kel Bar
Handle
(H
PK
275)
(A)
OV
QH
Pear
Univ
ers
al Pear
Mia
mi
Waln
ut
MD
F
Waln
ut
(R)
Waln
ut
Matt
Nic
kel Pull
Handle
(H
PK
276)
(S
)M
att
Nic
kel Bar
Handle
(H
PK
275)
(A)
WM
NW
AN
Waln
ut
N/A
Univ
ers
al W
aln
ut
Mezz
oM
DF
Mezz
o (
R)
Mezz
o
Matt
Nic
kel Pull
Handle
(H
PK
276)
(S
)M
att
Nic
kel Bar
Handle
(H
PK
275)
(A)
MM
MW
NB
Mezz
o
Univ
ers
al M
ezz
o
Min
neap
olis
Waln
ut
Glo
ssM
DF
Meta
llic
(R)
Meta
llic
Bru
shed
Ste
el C
hu
nky
‘D
’ H
and
le (
HPK
35
4)
(S)
Stai
nles
s St
eel L
ong
Chu
nky
Bar
Han
dle
(HPK
355-
362)
(A
)
WC
DW
LB
Meta
llic
N/A
Univ
ers
al M
etal
lic,
Glo
ss W
alnut
Foil*
Waln
ut
Waln
ut
Bru
shed
Ste
el C
hu
nky
‘D
’ H
and
le (
HPK
35
4)
(S)
Stai
nles
s St
eel L
ong
Chu
nky
Bar
Han
dle
(HPK
355-
362)
(A
)
WC
FW
LD
Waln
ut
Nevad
aLi
gh
t o
livew
oo
d M
FC(h
orizo
nta
l gra
in)
Waln
ut
(R)
Lig
ht
Oliv
ewo
od
Titaniu
m B
ow
Handle
(H
PK
413)
(S)
Matt
Nic
kel Lo
ng B
ar
Handle
(H
PK
275,
211-2
17)
(A)
LB
NLLN
Waln
ut
N/A
Univ
ers
al W
aln
ut
or
Meta
llic
Foil
Meta
llic
(R)
Titaniu
m B
ow
Handle
(H
PK
413)
(S)
Matt
Nic
kel Lo
ng B
ar
Handle
(H
PK
275,
211-2
17)
(A)
LB
MLLM
Meta
llic
New
po
rtIv
ory
PV
C w
rap
ped
Ivory
Ivory
Goth
ic D
Handle
(H
PK
346)
(S
)G
roove
d P
ew
ter
D H
andle
(H
PK
363)
(A
)
IIG
IGV
Ivory
Ivory
Univ
ers
al Iv
ory
Foil
Tangent
Ivory
Foil
Blo
nde O
ak
Blo
nde O
ak
Goth
ic D
Handle
(H
PK
346)
(S
)G
roove
d P
ew
ter
D H
andle
(H
PK
363)
(A
)
IBG
IGB
Blo
nde O
ak
Blo
nde O
ak
Univ
ers
al Blo
nde O
ak F
oil
Tangent
Blo
nde O
ak F
oil
Sto
ne M
FCW
hite (
R)
Sto
ne
Brus
hed
Stee
l Chu
nky
‘D’ H
andl
e (H
PK35
4)
(S)
Mat
t N
icke
l Chu
nky
‘D’ H
andl
e (H
PK22
6)
(A)
Brus
hed
Stee
l Arc
h H
andl
e (H
PK43
0)
(A)
NC
WN
BT
NSW
White
N/A
Univ
ers
al W
hite o
r Iv
ory
Foil
Ivory
Brus
hed
Stee
l Chu
nky
‘D’ H
andl
e (H
PK35
4)
(S)
Mat
t N
icke
l Chu
nky
‘D’ H
andl
e (H
PK22
6)
(A)
Brus
hed
Stee
l Arc
h H
andl
e (H
PK43
0)
(A)
NC
VN
BV
NSV
Ivory
Sla
te M
FCW
hite (
R)
Sla
te
Brus
hed
Stee
l Chu
nky
‘D’ H
andl
e (H
PK35
4)
(S)
Mat
t N
icke
l Chu
nky
‘D’ H
andl
e (H
PK22
6)
(A)
Brus
hed
Stee
l Arc
h H
andl
e (H
PK43
0)
(A)
EC
WEB
HEFW
White
N/A
Univ
ers
al W
hite o
r Iv
ory
Foil
Oakla
nd
Ivory
Brus
hed
Stee
l Chu
nky
‘D’ H
andl
e (H
PK35
4)
(S)
Mat
t N
icke
l Chu
nky
‘D’ H
andl
e (H
PK22
6)
(A)
Brus
hed
Stee
l Arc
h H
andl
e (H
PK43
0)
(A)
EC
VEB
VESV
Ivory
Taupe M
FCW
hite (
R)
Taupe
Brus
hed
Stee
l Chu
nky
‘D’ H
andl
e (H
PK35
4)
(S)
Mat
t N
icke
l Chu
nky
‘D’ H
andl
e (H
PK22
6)
(A)
Brus
hed
Stee
l Arc
h H
andl
e (H
PK43
0)
(A)
TC
WTB
TTSW
White
N/A
Univ
ers
al W
hite o
r Iv
ory
Foil
Ivory
Brus
hed
Stee
l Chu
nky
‘D’ H
andl
e (H
PK35
4)
(S)
Mat
t N
icke
l Chu
nky
‘D’ H
andl
e (H
PK22
6)
(A)
Brus
hed
Stee
l Arc
h H
andl
e (H
PK43
0)
(A)
TC
VTB
VTSV
Ivory
112409_Koncept_Product_Spec_Guide.indd 12 03/03/2011 14:04
13
STANDARD COLOUR SPECIFICATION 15MM VISTA AND 18MM EXCELR
an
ge
Do
or
Fin
ish
Cab
inet
Exte
rio
r+
15m
m V
ista
Co
rner
Po
st
(incl
udin
g b
ase
and w
all s
pac
ers,
tray
space
rs,
end s
upport
pan
els
and M
FC b
ack
pan
els)
R †
Rec
om
men
ded
Colo
ur
18m
m E
xce
lC
orn
er
Po
st*
Han
dle
/Tri
m
S†Sta
ndard
A†A
ltern
ative
Co
de
Co
nti
nu
ou
s
Plin
th(O
ptional Ext
ra)
18m
m
Win
g E
nd
(L
uxu
ry)
Co
rnic
ean
d P
elm
et
(*Sta
ndard
)
Meta
llic
(R)
Meta
llic
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
WC
MW
LM
Meta
llic
White
MD
F
Waln
ut
White
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
WC
NW
LN
White
N/A
Univ
ers
al M
eta
llic*
, W
aln
ut,
White,
Mezz
o F
oil
White
Waln
ut
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
WC
WW
LW
Waln
ut
Mezz
oM
ezz
oM
att
Nic
kel C
hu
nky
‘D
’ H
and
le (
HPK
35
4)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
WC
ZW
LZ
Mezz
o
Meta
llic
(R)
Meta
llic
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
GC
MG
LM
Meta
llic
Dove
Gre
yM
DF
White
White
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
GC
WG
LW
White
N/A
Univ
ers
al M
eta
llic*
, W
aln
ut,
Pear,
Mezz
o o
r Iv
ory
Foil
Waln
ut
Waln
ut
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
GC
NG
LN
Waln
ut
Mezz
oM
ezz
oM
att
Nic
kel C
hu
nky
‘D
’ H
and
le (
HPK
35
4)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
GC
ZG
LZ
Mezz
o
Ore
go
nPear
(R)
Pear
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
ICP
ILP
Pear
Cre
am
MD
FM
eta
llic
Meta
llic
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
ICM
ILM
Meta
llic
N/A
Univ
ers
al M
eta
llic*
, W
aln
ut,
Pear,
Mezz
o o
r Iv
ory
Foil
Waln
ut
Waln
ut
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
ICN
ILN
Waln
ut
Mezz
oM
ezz
oM
att
Nic
kel C
hu
nky
‘D
’ H
and
le (
HPK
35
4)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
ICZ
ILZ
Mezz
o
Ivory
Ivory
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
ICI
ILI
Ivory
Pear
(R)
Pear
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
SC
PSLP
Pear
Barley
MD
FM
eta
llic
Meta
llic
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
SC
MSLM
Meta
llic
N/A
Univ
ers
al M
eta
llic*
, W
aln
ut,
Pear,
Mezz
o o
r Iv
ory
Foil
Waln
ut
Waln
ut
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
SC
NSLN
Waln
ut
Mezz
oM
ezz
oM
att
Nic
kel C
hu
nky
‘D
’ H
and
le (
HPK
35
4)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
SC
ZSLZ
Mezz
o
Ivory
Ivory
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
(H
PK3
54
) (S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)
SC
VSLV
Ivory
112409_Koncept_Product_Spec_Guide.indd 13 03/03/2011 14:04
14
STANDARD COLOUR SPECIFICATION 15MM VISTA AND 18MM EXCELR
an
ge
Do
or
Fin
ish
Cab
inet
Exte
rio
r+
15m
m V
ista
Co
rner
Po
st
(incl
udin
g b
ase
and w
all s
pac
ers,
tray
space
rs,
end s
upport
pan
els
and M
FC b
ack
pan
els)
R †
Rec
om
men
ded
Colo
ur
18m
m E
xce
lC
orn
er
Po
st*
Han
dle
/Tri
m
S†Sta
ndard
A†A
ltern
ative
Co
de
Co
nti
nu
ou
s
Plin
th(O
ptional Ext
ra)
18m
m
Win
g E
nd
(L
uxu
ry)
Co
rnic
ean
d P
elm
et
(*Sta
ndard
)
White (
R)
White
Satin
Nic
kel W
edg
e H
and
le -
(H
PK4
46
)
(S)
Cu
rve
Bo
x H
and
le P
olis
hed
Ch
rom
e (H
PK4
45
) (A
) N
icke
l Bar
Han
dle
(H
PK2
14
) (A
)
HW
WH
PW
G
1
White
N/A
Univ
ers
al W
hite o
r M
eta
llic
Foil
Orl
an
do
White
Pai
nte
d M
DF
with
gla
ss e
ffec
t ed
gin
gM
eta
llic
Meta
llic
Satin
Nic
kel W
edg
e H
and
le -
(H
PK4
46
)
(S)
Cu
rve
Bo
x H
and
le P
olis
hed
Ch
rom
e (H
PK4
45
) (A
) N
icke
l Bar
Han
dle
(H
PK2
14
) (A
)
HW
MH
PM
G
1M
Meta
llic
Mezz
oM
ezz
oSa
tin
Nic
kel W
edg
e H
and
le -
(H
PK4
46
)
(S)
Cu
rve
Bo
x H
and
le P
olis
hed
Ch
rom
e (H
PK4
45
) (A
) N
icke
l Bar
Han
dle
(H
PK2
14
) (A
)
HW
ZH
PZ
G1Z
Mezz
oN
/AU
niv
ers
al M
ezz
o F
oil
or
Tangent
Mezz
o F
oil
Waln
ut
Waln
ut
Satin
Nic
kel W
edg
e H
and
le -
(H
PK4
46
)
(S)
Cu
rve
Bo
x H
and
le P
olis
hed
Ch
rom
e (H
PK4
45
) (A
) N
icke
l Bar
Han
dle
(H
PK2
14
) (A
)
HW
NH
PN
G
1N
Waln
ut
N/A
Univ
ers
al W
aln
ut
Foil
Pasa
den
aM
aple
MD
F
Pear
Pear
Mat
t N
icke
l Ch
un
ky ‘
D’
Han
dle
- (
HPK
35
4)
(S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (
A)
MSP
MK
PPear
N/A
Univ
ers
al Pear
Foil
Ph
ilad
elp
hia
Birch
Tim
ber
Pear
Pear
Mat
t N
icke
l Lo
ng
Sq
uar
e ‘D
’ H
and
le (
HPK
33
7)
(S
)M
att
Nic
kel B
ar H
and
le (
HPK
21
4/2
75
)
(A
)
PSD
QH
Pear
Conte
mpora
ryPear
Veneer
Tangent
Pear
Foil,
*U
niv
ers
al Pear
Foil
Ren
oG
loss
Latt
eM
DF
Meta
llic
Meta
llic
Mat
t N
icke
l In
set
(HPK
33
2)
(S)
5X
MM
eta
llic
Univ
ers
al M
eta
llic
or
Waln
ut
Foil
Waln
ut
Waln
ut
Mat
t N
icke
l In
set
(HPK
33
2)
(S)
5X
WW
aln
ut
N/A
Ivory
Ivory
Mat
t N
icke
l G
roo
ved
Bar
Han
dle
(H
PK2
79
) (S
)Po
lish
ed C
hro
me
‘D’
Han
dle
(H
PK4
45
) (A
) A
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (A
)
VA
VV
HV
VJV
Ivory
Glo
ss Ivo
ry
Glo
ss Ivo
ryM
DF
Meta
llic
(R)
Meta
llic
Mat
t N
icke
l G
roo
ved
Bar
Han
dle
(H
PK2
79
) (S
)Po
lish
ed C
hro
me
‘D’
Han
dle
(H
PK4
45
) (A
)A
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (A
)
VA
MV
HM
VJM
Meta
llic
(R)
N/A
Univ
ers
al M
eta
llic,
Waln
ut
Foil
Tra
ditio
nal Iv
ory
Glo
ss F
oil
Waln
ut
Waln
ut
Mat
t N
icke
l G
roo
ved
Bar
Han
dle
(H
PK2
79
) (S
)Po
lish
ed C
hro
me
‘D’
Han
dle
(H
PK4
45
) (A
)A
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (A
)
VA
NV
HN
VJN
Waln
ut
N/A
Sale
rno
Mezz
oM
ezz
oM
att
Nic
kel G
roo
ved
Bar
Han
dle
(H
PK2
79
) (S
)Po
lish
ed C
hro
me
‘D’
Han
dle
(H
PK4
45
) (A
)A
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (A
)
VA
ZV
HZ
VJZ
Mezz
oN
/A
Meta
llic
(R)
Meta
llic
Mat
t N
icke
l G
roo
ved
Bar
Han
dle
(H
PK2
79
) (S
)Po
lish
ed C
hro
me
‘D’
Han
dle
(H
PK4
45
) (A
)A
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (A
)
IUM
HPM
HFM
Meta
llic
(R)
N/A
Glo
ss W
hite
MD
FW
hite
White
Mat
t N
icke
l G
roo
ved
Bar
Han
dle
(H
PK2
79
) (S
)Po
lish
ed C
hro
me
‘D’
Han
dle
(H
PK4
45
) (A
)A
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (A
)
IUH
PW
HFW
Glo
ss W
hite
Glo
ss W
hite
Univ
ers
al M
eta
llic,
Waln
ut,
M
ezz
o F
oil.
Tra
ditio
nal W
hite
Glo
ss F
oil
Waln
ut
Waln
ut
Mat
t N
icke
l G
roo
ved
Bar
Han
dle
(H
PK2
79
) (S
)Po
lish
ed C
hro
me
‘D’
Han
dle
(H
PK4
45
) (A
)A
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (A
)
IUW
HPN
HFN
Waln
ut
N/A
Mezz
oM
ezz
oM
att
Nic
kel G
roo
ved
Bar
Han
dle
(H
PK2
79
) (S
)Po
lish
ed C
hro
me
‘D’
Han
dle
(H
PK4
45
) (A
)A
lum
iniu
m F
lat
‘D’
Han
dle
(H
PK3
71
) (A
)
IUZ
HPZ
HFZ
Mezz
oN
/A
112409_Koncept_Product_Spec_Guide.indd 14 03/03/2011 14:04
15
*15m
m c
orn
er
post
s are
matc
hed t
o t
he c
arc
ase
colo
ur.
NB:
Acc
ess
ories
will
be s
upplie
d in t
he c
olo
urs
and m
ate
rials
show
n o
n t
his
page u
nle
ss t
he a
ltern
ative
is
speci
fied a
t ord
er
stage.
Ple
ase
refe
r to
the r
ele
vant
sect
ions
els
ew
here
in t
his
book f
or
full
colo
ur
ava
ilabili
ty o
f in
div
idual pro
duct
s.
No
tes
15m
m V
ista
Cabin
et
ava
ilable
in:
18m
m E
xcel C
abin
et
ava
ilable
in:
Blo
nd
e O
ak
Pear
Meta
llic
Ivo
ry
Wh
ite
Waln
ut
Mezz
o
Wh
ite
Meta
llic
Pear
Ivo
ry
Blo
nd
e O
ak
Waln
ut
Mezz
o
STANDARD COLOUR SPECIFICATION 15MM VISTA AND 18MM EXCELR
an
ge
Do
or
Fin
ish
Cab
inet
Exte
rio
r+
15m
m V
ista
Co
rner
Po
st
(incl
udin
g b
ase
and w
all s
pac
ers,
tray
space
rs,
end s
upport
pan
els
and M
FC b
ack
pan
els)
R †
Rec
om
men
ded
Colo
ur
18m
m E
xce
lC
orn
er
Po
st*
Han
dle
/Tri
m
S†Sta
ndard
A†A
ltern
ative
Co
de
Co
nti
nu
ou
s
Plin
th(O
ptional Ext
ra)
18m
m
Win
g E
nd
(L
uxu
ry)
Co
rnic
ean
d P
elm
et
(*Sta
ndard
)
Sand Z
ebra
no
MFC
Pear
(R)
Pear
Mat
t N
icke
l Bo
wed
‘D
’ H
and
le (
HPK
36
7)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
SZA
SZB
Pear
Univ
ers
al Pear
Foil
Tu
lsa
Rom
ano C
herr
yM
FC
Pear
(R)
Pear
Mat
t N
icke
l Bo
wed
‘D
’ H
and
le (
HPK
36
7)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
RO
AR
OB
Pear
N/A
Univ
ers
al Pear
Foil
Chate
au O
ak
MFC
Pear
(R)
Pear
Mat
t N
icke
l Bo
wed
‘D
’ H
and
le (
HPK
36
7)
(S)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK2
75
, 2
11
-21
7)
(A)
CH
CC
HD
Pear
Univ
ers
al Pear
Foil
White (
R)
White
Wid
e C
hro
me
D H
and
le (
HPK
44
8)
(S
) B
rush
ed S
teel
Arc
h H
and
le (
HPK
43
0)
(A
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
21
1-2
17
)
(A)
GB
WG
AW
Q3
White
N/A
Glo
ss W
hite F
oil
Meta
llic
Meta
llic
Wid
e C
hro
me
D H
and
le (
HPK
44
8)
(S
) B
rush
ed S
teel
Arc
h H
and
le (
HPK
43
0)
(A
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
21
1-2
17
)
(A)
GB
MG
AX
Q3M
Meta
llic
N/A
Univ
ers
al W
hite,
Ivory
, M
ezz
o,
Meta
llic,
Waln
ut
Foil
Waln
ut
Waln
ut
Wid
e C
hro
me
D H
and
le (
HPK
44
8)
(S
) B
rush
ed S
teel
Arc
h H
and
le (
HPK
43
0)
(A
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
21
1-2
17
)
(A)
GB
NG
AU
Q3N
Waln
ut
N/A
Mezz
oM
ezz
oW
ide
Ch
rom
e D
Han
dle
(H
PK 4
48
)
(S)
Bru
shed
Ste
el A
rch
Han
dle
(H
PK 4
30
)
(A)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK 2
11
-21
7)
(A
)
GB
ZG
AZ
Q3Z
Mezz
oN
/A
Wo
od
bu
ryIv
ory
(R)
Ivory
Wid
e C
hro
me
D H
and
le (
HPK
44
8)
(S
) B
rush
ed S
teel
Arc
h H
and
le (
HPK
43
0)
(A
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
21
1-2
17
)
(A)
VEV
IUV
I4V
Ivory
N/A
Glo
ss Ivo
ry F
oil
Waln
ut
Waln
ut
Wid
e C
hro
me
D H
and
le (
HPK
44
8)
(S
) B
rush
ed S
teel
Arc
h H
and
le (
HPK
43
0)
(A
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
21
1-2
17
)
(A)
VEN
IUN
I4N
Waln
ut
N/A
Univ
ers
al W
hite,
Ivory
, M
ezz
o,
Meta
llic,
Waln
ut
Foil
Mezz
oM
ezz
oW
ide
Ch
rom
e D
Han
dle
(H
PK 4
48
)
(S)
Bru
shed
Ste
el A
rch
Han
dle
(H
PK 4
30
)
(A)
Mat
t N
icke
l Lo
ng
Bar
Han
dle
(H
PK 2
11
-21
7)
(A
)
VEZ
IUY
I4Z
Mezz
oN
/A
Meta
llic
Meta
llic
Wid
e C
hro
me
D H
and
le (
HPK
44
8)
(S
) B
rush
ed S
teel
Arc
h H
and
le (
HPK
43
0)
(A
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
21
1-2
17
)
(A)
VEM
IUX
I4M
Meta
llic
N/A
Van
cou
ver
Blo
nde O
ak
Tim
ber
Blo
nde O
ak (
R)
Blo
nde O
ak
Mat
t N
icke
l Bar
Han
dle
(H
PK2
14
/27
5)
(S)
BLN
Blo
nde O
ak
Blo
nde O
ak
Veneer
Cove
d B
londe O
ak V
eneer
Univ
ers
al Blo
nde O
ak F
oil*
Tangent
Blo
nde O
ak F
oil
Vir
gin
iaW
aln
ut
MFC
Waln
ut
(R)
Waln
ut
Mat
t N
icke
l Bo
wed
‘D’
Han
dle
(H
PK3
67
) (S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)Sa
tin
Nic
kel B
ow
Han
dle
(H
PK4
33
) (A
)
WLG
WLE
WLA
Waln
ut
N/A
Univ
ers
al W
aln
ut
Foil*
Tangent
Waln
ut
Foil
Maple
MFC
Pear
Maple
Mat
t N
icke
l Bo
wed
‘D’
Han
dle
(H
PK3
67
) (S
)M
att
Nic
kel L
on
g B
ar H
and
le (
HPK
27
5,
21
1-2
17
) (A
)Sa
tin
Nic
kel B
ow
Han
dle
(H
PK4
33
) (A
)
MA
GM
AD
MA
K
Maple
Univ
ers
al Pear
Foil
112409_Koncept_Product_Spec_Guide.indd 15 03/03/2011 14:04
CORNER BASE UNITS
Space out from return wall asappropriate (see below) Unit Code Description
CS106DC Corner Sink Unit 1000 x 600 x 870, 600 door
Symphony’s range of corner base units allows wide flexibility in the positioning of corner units for the clearance of water or soil vent pipes when required.
Please specify the handing of the blanking panel side when ordering. For an explanation of handings see page 4.
All corner base units have centre hung doors with
110° hinges. Corner posts and blanking panels
are fitted as standard. On corner base units with
a corner post, a blanking panel covers the void of
the unit.
A 600mm colour co-ordinated blanking panel is
fitted where corner posts are NOT required - e.g.
when the blank abuts a void for a freestanding
appliance or tray space.
IMPORTANT: Please specify the handing of the
side of the blanking panel when ordering.
CORNER POSTThe corner post allows product ranges with
protruding handles to be offset by 30mm in order
to avoid possible clashing of drawer handles
in a corner. The corner post automatically spaces
out the units to the correct size across Dimension
A. However the fitter must remember to position
the corner unit (as appropriate) from the wall.
(see below).
CORNER SINK BASE UNITS1000mm corner base units can also be supplied
as corner sink units. To specify a corner sink unit,
change the prefix letters on the standard corner
base unit code from ‘CB’ to ‘CS’ as shown in the
example right.
L SHAPE CORNER BASE UNITA corner unit with either a shelf or a
revolving carousel.
The two doors are hinged on the end panels and
open to 170°. In order to facilitate transportation,
the unit is supplied in two parts, one rigid and
one flatpack and the carousel or shelf must
be fitted on site. Full height door or door and
dummy drawer front styles are available. The
dummy drawer fronts are fixed to the doors.
Door andDummy Drawer
Full Height Door
16
NB: When designing or
specifying for a kitchen,
allowance must be made for the
30mm extension, both in the
unit positioning and the sizes of
the worktops.
112409_Koncept_Product_Spec_Guide.indd 16 03/03/2011 14:04
•
• •••
••
540
CB96FA
CB96DA
1080mm
180mm Gap
390 450
17
CORNER BASE UNITS
* Supplied in 2 parts, one rigid and one
flatpack
900mm CORNER BASE UNIT
1000mm CORNER BASE UNITS
1200mm CORNER BASE UNIT L SHAPE CORNER BASE UNITS* (only for use with 600mm wide units)
• Not available in Primo Zebrano
800mm CORNER BASE UNITS
112409_Koncept_Product_Spec_Guide.indd 17 03/03/2011 14:04
Double Base UnitTwo doors, one shelf
18
BASE UNITS
Full Height Width Code
Single Base Unit
One door, one shelf
150 BU1506F
150 BU1506BAF
300 BU36F
400 BU46F
450 BU456F
870
Base Oven Housing Width CodeBase Oven Housing Width Code
Base Oven Housing
600 BOH66(supplied with 120mm fascia)
900 KBOH96(supplied ready for assembly
with metallic fascia)
600 BOH66D(supplied ready for assembly
with drawer)
870
570570
800 BU86F
900 BU96F
1000 BU106F
1200 BU126F
Drawer Base Units Width Code
Four Drawer
Base Unit
400
500
600
DU46D•DU56D*•DU66D*•
Four Drawer
Base UnitTop drawer is a dummy drawer
400
500
600
DU46DAQ•DU56DAQ*•DU66DAQ*•
Three Drawer Pan Drawer UnitTwo deep pull out pan drawers and one shallow drawer (800 and 1000 supplied with Revo drawerbox only, 18mm Excel cabinet only. 500 & 600 can have Supra drawer box).
500
600
800
1000
PD56D3
PD66D3*
PD86D3*
PD106D3*
2 Drawer Pan Units(800 and 900 supplied with
Revo drawerbox only, 18mm
Excel cabinet only)
500
600
800
900
PD56D2
PD66D2
PD86D2
PD96D2
2 Drawer Pan Unitswith internal drawers(800 and 900 supplied with Revo drawerbox only, 18mm Excel cabinet only)
500
600
800
900
PD56D2IDT
PD66D2IDT
PD86D2IDT
PD96D2IDT
870
570
SINK UNITS
Drawer Line Width Code
Single Hob/Sink
Base Unit One door, one shelf,
one dummy drawer
600 BU66DDD•
Single Sink Base UnitOne dummy drawer,
one shelf, one sink liner
500
600
SU56SLDAC
SU66SLDAC
Double Sink Base UnitOne dummy drawer, one
working drawer, two doors,
one shelf
1000
1200
SUI06D•
SUI26D
Double Sink Base UnitOne dummy drawer,
two shelves, one sink liner
900
1000
1200
SU96SLDAC
SU106SLDAC
SU126SLDAC
Double Sink Base UnitTwo dummy drawers,
two doors, one shelf
1000
1200
SUI06DAI•
SUI26DAI
Drawer Line Width Code
Double Sink Base UnitTwo dummy drawers,
two doors, one shelf,
one sink liner
900
1000
1200
SU96SLDAI
SU106SLDAI
SU126SLDAI
Three Drawer Sink Unit(supplied with Revo drawer
box only. 18mm Excel cabinet
only)
800
1000
PD86D3SU
PD106D3SU
Two Drawer Sink Unit(supplied with Revo drawer
box only. 18mm Excel cabinet
only)
800
900
PD86D2SU
PD96D2SU
870
570
870
570
Drawer Line Width Code
Single Base Unit
One door, one drawer,
one shelf
300 BU36D• 400 BU46D• 450 BU456D• 500 BU56D• 600 BU66D
Double Base UnitTwo doors, two drawers,
one shelf
800 BU86D• 900 BU96D• 1000 BU106D• 1200 BU126D•
112409_Koncept_Product_Spec_Guide.indd 18 03/03/2011 14:04
19
Double Wall UnitTwo doors, one shelf
(15mm Vista)
Two doors, two shelves
(18mm Excel)
724mm Width Code
Single Wall UnitOne door, one shelf
(15mm Vista)
One door, two shelves
(18mm Excel)
150 WU15072
300 WU372
400 WU472*
450 WU4572*
500 WU572*
600 WU672*
800 WU872*
900 WU972*
1000 WU1072*
Corner Wall UnitOne door, one shelf (170
o
Vista
135o
Excel hinges)
(15mm Vista)
One door, one shelf
90o
special hinges (18mm Excel)
600 CWU672
Diagonal Corner
Wall Unit One door, one shelf (90
o
hinges)
Not suitable for use as a
terminating unit or alone
630 DWU672
(2 spacer panels)
724
285
* If used as a stainless steel accent door use code with suffix XC
or for Boston Black as an accent door use code with suffix BC.
724mm Width Code
Glazed Wall UnitOne glazed door, one shelf
Glazed Diagonal Corner
Wall UnitOne glazed door, one shelf
90o
hinges.
Not suitable for use as a
terminating unit or alone
630 GDWU672†
400 GDU472†
500 GDU572†
Microwave Wall Unit406mm (max) - 358mm (min) x
564mm aperture
600 MWU672•
724
285
724
330
724
Please note:
This unit does not line up with wall units but is slightly deeper than standard wall units.
Glazed door styles and leading vary according to range.† Supplied on 18mm Excel cabinet only
• Not available in Primo Zebrano or Primo Noce.
561mm (15mm Cabinet only) Width Code
Double Wall UnitTwo doors, one shelf
Single Wall UnitOne door, one shelf
300 WU356• 400 WU456• 450 WU4556• 500 WU556• 600 WU656•
561mm Width Code
WALL UNITS
800 WU856• 900 WU956• 1000 WU1056•
Corner Wall UnitOne door, one shelf (170
o
Vista
135o
Excel hinges)
Blank end for corner returns
600 CWU656•
Diagonal Corner
Wall Unit One door, one shelf (90
o
hinges)
Not suitable for use as a
terminating unit or alone
630 DWU656•
561
285
900mm (18mm Excel only) Width Code
Single Wall UnitOne door, two shelves
300 WU390
400 WU490
450 WU4590
500 WU590
600 WU690
Double Wall UnitTwo doors, two shelves
Corner Wall UnitOne door, two shelves
(170o
Vista 135o
Excel hinges)
Diagonal Corner
Wall Unit One door, two shelves
(90o
hinges) Not suitable for use
as a terminating unit or alone
Glazed Wall Unit One glazed door, two shelves
800 WU890
900 WU990
1000 WU1090
600 CWU690
630 DWU690•(inc 2 spacer panels)
500 GDU590
900
285
Full Height Width Code
Single Sink Base UnitOne door, one shelf,
500
600
BU56F
BU66F
Single Sink Base UnitOne door, one shelf, one
dummy drawer, one sink liner
500
600
SU56SLF
SU66SLF
870
570
SINK UNITS
Full Height Width Code
Double Sink Base UnitTwo doors, one shelf,
one sink liner
800
900
1000
1200
SU86SLF
SU96SLF
SU106SLF
SU126SLF
112409_Koncept_Product_Spec_Guide.indd 19 03/03/2011 14:04
20
Larder UnitTwo doors,
four shelves
Broom UnitTwo doors,
three shelves
Reduced Depth
Larder UnitTwo doors,
two shelves
300 LU36
500 LU56
600 LU66
300 BR36
500 BR56
600 BR66
300 LU3623
500 LU5623
600 LU6623
300 BR3623
500 BR5623
600 BR6623
1228mm door
720mm door
1228mm door
720mm door
Pull Out
Larder Unit(LU36 with
Chrome Basket -
PLUBASKCX)
Pantry UnitTwo doors,
four drawers.
Pantry UnitTwo doors,
three drawers.
1228mm door
1228mm door
159mm drawer
183mm drawer
1228mm door
159mm drawer
276mm drawer
300 PL36
300 WPL36 (soft close)
600 PU6621D4
600 PU6621D3
1228mm door
896mm door
Broom UnitTwo doors,
four shelves
1228mm door
896mm door
Pull Out
Larder Unit(LU3623 with
Chrome Basket -
PLUBASKCX)
Pantry UnitTwo doors,
two drawers.
1228mm door 300 PL3623
300 WPL3623 (soft close)
600 PU6621D2
Larder UnitTwo doors,
four shelves
2100mm Width Code 2276mm (18mm Excel Cabinet only) Width Code
LARDER AND BROOM UNITS
2276
570
720mm door 896mm door
1228mm door
720mm door
2100
285
300 LU33▲
Reduced Depth
Larder UnitTwo doors,
two shelves
1228mm door
896mm door
2276
285
300 LU3323
▲ Available in 18mm Excel only.
Larder UnitTwo doors,
four shelves
Broom UnitTwo doors,
three shelves.
BRIDGING UNITS
450
Over Cooker
Hood Unit
Width Code
600 OCH63
285
300
Bridging Units 500
600
800
900
OCH536
OCH636
OCH836
OCH936
Bridging Units
Width Code
1000 OCH1028
Door Front for
Integrated Cooker Hood 600 DRICASS
Bi-Fold Units Width Code
Bi-Fold 500
600
800
900
HFWU572
HFWU672
HFWU872
HFWU972
BI-FOLD UNITS
285
362
1000
280
600
285
724
2100
570
2100
570
1228mm door
358mm drawer2100
570
112409_Koncept_Product_Spec_Guide.indd 20 03/03/2011 14:04
21
OVEN HOUSINGS
2100mm Aperture
Code Height
Microwave
and Single Oven
Housing
Microwave
and Single Oven
Housing
450mm door
296mm
pull-out drawer
Microwave
and Single Oven
Housing
450mm door
72mm fascia
47mm fascia
296mm
pull-out drawer
Microwave
and Single Oven
Housing
450mm door
47mm fascia
296mm
pull-out drawer
Microwave
and Single Oven
Housing
450mm door
47mm fascia
450mm
pull-out drawer*
Microwave
and Single Oven
Housing
450mm door
450mm
pull-out drawer*
Top: 456 OH661A
Lower: 595
Top: 585
Lower: 595
1180 OH661B
(Minus Shelf)
Top: 484 OH661C
Lower: 595
1133 OH661D
(Minus Shelf)
997 Max OH662A
1042 Max OH662B
2100
570
2100mm Aperture
Code Height
450mm door
72mm fascia
72mm fascia
296mm
pull-out drawer
600
shelf
Microwave
and Single Oven
Housing
450mm door
72mm fascia
450mm pull-out
drawer*
Top: 360 OH662G
Lower: 595
Double Oven
Housing
450mm door
47mm fascia
557mm door
Double Oven
Housing
450mm door
72mm fascia
557mm door
Double Oven
Housing
450mm door
120mm fascia
557mm door
Single Oven
or Microwave
Housing
557mm door
72mm fascia
159mm drawer
557mm door
Single Oven
or Microwave
Housing
557mm door
120mm fascia
159mm drawer
557mm door
Single Oven
or Microwave
Housing
720mm door
72mm fascia
557mm door
890 Max OH663A
865 Max OH663B
817 Max OH663C
595 Max OH664A
547 Max OH664B
595 Max OH665A
2100
Microwave
and Single Oven
Housing
Top: 330 OH662E
Lower: 595
450mm door
47mm fascia
72mm fascia
450mm
pull-out drawer*570
600
Microwave
& Single Oven
Housing
450mm door
47mm fascia
47mm fascia
450mm pull-out
drawer*
Microwave
& Single Oven
Housing
450mm door
72mm fascia
72mm fascia
450mm pull-out
door drawer*
Top: 355 OH662C
Lower: 595
Top: 303 OH662D
Lower: 595
* One wirework basket and one metal sided basket.
112409_Koncept_Product_Spec_Guide.indd 21 03/03/2011 14:04
22
*One wirework basket and one metal sided basket.
Single Oven
or Microwave
Housing
720mm door
120mm fascia
557mm door
547 Max OH665B2100
570
600
Single Oven
or Microwave
Housing
557mm door
72mm fascia
720mm door
595 OH666A
Single Oven
or Microwave
Housing
557mm door
120mm fascia
720mm door
547 OH666B
Microwave
Housing
720mm door
47mm fascia
720mm door
Microwave
Housing
720mm door
120mm fascia
720mm door
Microwave
Housing
720mm door
72mm fascia
72mm fascia
720mm door
457 Max OH667A
384 Max OH667B
360 Max OH667C
OVEN HOUSINGS
2100mm Aperture
Code Height
450mm door
120mm fascia
450mm door
72mm fascia
120mm fascia
Double Oven
and Microwave
Housing
Top: 467 OH668A
Lower: 890
Double Oven
and Microwave
Housing
Top: 395 OH668B
Lower: 890
600
Compact
Appliance
Housing
296mm flap
72mm fascia
No drawer
720mm door
Compact
Appliance
Housing
Top: 377 OH669A
Lower: 462
Top: 377 OH669B
Lower: 406
296mm flap
72mm fascia
72mm fascia
720mm door
2100mm Aperture
Code Height
Microwave
and Single Oven
Housing
720mm door
47mm fascia
450mm
pull-out drawer*
882 Max OH66232D
Microwave
and Single Oven
Housing
Top: 335 OH66232C
Lower: 595
2276mm (18mm Excel Cabinet only) Aperture
Code Height
Microwave
and Single Oven
Housing
720mm door
450mm
pull-out drawer*
Microwave
and Single Oven
Housing
557mm door
72mm fascia
72mm fascia
450mm pull-out
drawer*
Top: 343 OH66232E
Lower: 595
Top: 372 OH66232G
Lower: 595
2100
570
600
2276
570
600
720mm door
shelf
450mm
pull-out
drawer*
112409_Koncept_Product_Spec_Guide.indd 22 03/03/2011 14:04
Microwave
Housing
896mm door
72mm fascia
72mm fascia
720mm door
358 Max OH66237C
23
Please Note: 1381mm, 2100mm and 2276mm Appliance Housings.Symphony can supply appliance housings to accommodate a wide selection of built-in appliances manufactured by Electrolux Group. For appliances supplied by other manufacturers, please make sure sizes are checked before ordering. The appliance manufacturer and the model number must be specified when ordering. Units can be hinged left or right.
Double Oven
Housing
557mm door
120mm fascia
557mm door
890 Max OH66233A
Double Oven
Housing
720mm door
557mm door
840 Max OH66233B
2276mm (18mm Excel Cabinet only) Aperture
Code Height
545 Max OH66235B
Single Oven
or Microwave
Housing
557mm door
72mm fascia
896mm door
595 Max OH66236A
Single Oven
or Microwave
Housing
896mm door
120mm fascia
557mm door
Single Oven
or Microwave
Housing
557mm door
120mm fascia
896mm door
545 Max OH66236B
2276
2276mm (18mm Excel Cabinet only) Aperture
Code Height
Microwave
Housing
896mm door
47mm fascia
720mm door
455 Max OH66237A
570
600
Single Oven
or Microwave
Housing
Single Oven
or Microwave
Housing
896mm door
72mm fascia
557mm door
595 Max OH66235A
Double Oven
Housing
720mm door
47mm fascia
557mm door
Single Oven
or Microwave
Housing
720mm door
72mm fascia
159mm drawer
557mm door
793 Max OH66233C
608 Max OH66234A
720mm door
72mm fascia
72mm fascia
159mm drawer
557mm door
546 Max OH66234B
OVEN HOUSINGS
Microwave
Housing
896mm door
120mm fascia
720mm door
382 Max OH66237B
2276
570
600
112409_Koncept_Product_Spec_Guide.indd 23 03/03/2011 14:04
24
IMPORTANT Symphony appliance housings are vented through the plinth. Please
check the appliance manufacturer’s instructions as to the venting requirements for
any particular appliance. All appliances must be fitted strictly in accordance with the
manufacturer’s instructions. A ventilation grill, code: VENTGRILL 200, can be ordered
separately. The ventilation grills are to aid ventilation only and manufacturer’s instructions
on ventilation arrangements should be followed at all times. 1381mm appliance housings
must be vented through the top of the unit using a VENTGRILL 200 fitted into the
worktop.
GENERAL INFORMATION
600 IF66G
600 IF66A
600 IF66D
FRIDGE/FREEZER HOUSINGS
2276mm (18mm Excel Cabinet only) Width Code2100mm Width Code
One appliance
behind top
door, one
appliance
behind bottom
door
One appliance
behind bottom
door
1018mm door
930mm door
720mm door
1228mm door
600 IF66B
One appliance
behind
middle door
One appliance
behind top and
bottom door
296mm flap
(hinged to top)
930mm door
720mm door
1228mm door
720mm door
600 IF66C
2100
570
One appliance
behind middle
door
600 IF66F
One appliance
behind to and
bottom door
296 mm drawer front
296mm flap
(hinged to top)
120mm fascia
1228mm door
1228mm door
720mm door
570w x 2100h
One appliance
behind bottom
door
One appliance
behind
middle door
896mm door
1228mm door
296mm flap
(hinged to top)
930mm door
896mm door
600 IF6623B
600 IF6623C
middle door.
One appliance
behind top and
bottom door
1228mm door
896mm door
600 IF6623D
600 IF6623K
600 IF6623J
One appliance
behind bottom
door and middle
door
One appliance
behind top
door, one
appliance
behind bottom
door
296mm flap
(hinged to top)
1106mm door
720mm door
1106mm door
1018mm door
One appliance
behind top door,
one appliance
behind bottom
door
72mm fasia
1018mm door
1018mm door
600 IF6623A
2276
570
2276
570
112409_Koncept_Product_Spec_Guide.indd 24 03/03/2011 14:04
25
500 TLU5613SL 600 SOH6613A
Microwave or
Coffee Machine
Housing
Single Oven
Housing
72mm fascia
557mm door
600 SOH6613
596 (aperture)
Tambour
Larder Unit
47mm fascia
159mm drawer
276mm drawer
276mm drawer
1235mm
roll down door
600 MOH6613D3
450 (aperture)
Single Oven
and Microwave
Housing
72mm fascia
72mm fascia
120mm fascia
500 LU5613
600 LU6613 600 IF6613Appliance
Housing
MID HEIGHT UNITS
1381mm (18mm Excel Cabinet) Width Code
Deep Pan Unit4 drawers
Larder Unit 1228mm door
600 PD66D4Double Oven
Housing
47mm fascia
296mm
pull-out drawer
930mm door
296mm
pull-out drawer
600 DOH6613
890 (aperture)
1381mm (18mm Excel Cabinet) Width Code
1381
570
600 BH612
(Ready for Assembly
18mm Cabinet)
Dresser Boiler HousingDoor included
1366
400
BOILER HOUSINGS
Width Code
Boiler Housing CabinetDoor needs to be ordered
separately
Boiler Housing UnitDoor included. Always supplied
in 15mm apart from Mezzo
600 KBHC672
(Ready for Assembly)
600 BH69
Width Code
724
400
930
400
600 BH613
(Ready for Assembly)
Dresser Boiler HousingDoor included
600 BH615
(Ready for Assembly
18mm Cabinet)
Dresser Boiler HousingDoor included
Flat door
Flat door
Flat door
1190
400
1560
400
120mm fascia
276mm drawers
112409_Koncept_Product_Spec_Guide.indd 25 03/03/2011 14:04
26
CANOPIES
Size Code
Corner CanopySupplied in chipboard to be
finished on site
Corner Canopy
600 In-line Canopy
1072 x 1072 2046
972 x 972 x 450 CANCNR45
972 x 972 x 570 CANCNR57
600 x 411 x 450 CANIL6
Size Code
800 In-line Canopy*
1000 In-line Canopy*
800 x 460 x 450 CANIL8
800 x 460 x 570 CANIL857
1000 x 460 x 450 CANIL10
Please note that cooker hood ducting is not supplied with the appliance or canopy unit.
Please order separately.
Canopy styles vary according to range. Not available in Metallic.
* 600 extractor only
450 IDFD45ASS
500 DRDW5ASS
GENERAL INFORMATION
Width Code
INTEGRATED APPLIANCE DOORS
Semi Integrated
Dishwasher Door(undrilled for hinges)
Integrated
Full Height Door(undrilled for hinges)
Integrated Drawer
Line Door(undrilled for hinges)
596 DRDL6UDASS
596 DRFH6UDASS
596 IDFD2ASS
Width Code
Slimline Full Height
Dishwasher Door(drilled)
Slimline Drawer Line
Dishwasher Door(drilled)
450 DRDW45ASS
500 DRFH5ASS
720
720
557 720
720
Integrated Dishwasher
Door 600 DRDW4ASS720
Tambour UnitOne roll down door
500 TWDU513SL
TWDUG513SL
(Gloss White)†
WORKTOP DRESSER UNITS
1190mm (18mm Excel Cabinet only) Width Code
Three Spice DrawersOne glazed door, three glass
shelves,three spice drawers
Single Spice Drawer One glazed door, three glass
shelves,one spice drawer
Gallery RailOne glazed door, three glass
shelves, gallery rail
Tambour UnitOne roll down door
500 WDU512
WDUG512A
(Gloss White)†
500 WDU512B
WDUG512B
(Gloss White)†
500 WDU512C
WDUG512C
(Gloss White)†
500 TWDU512SL
TWDUG512SL
(Gloss White)†
1366mm (18mm Excel Cabinet only) Width Code
Three Spice DrawersOne glazed door, three glass
shelves, three spice drawers
Single Spice Drawer One glazed door, three glass
shelves,one spice drawer
Gallery RailOne glazed door, three glass
shelves, gallery rail
500 WDU513A
WDUG513A
(Gloss White)†
500 WDU513B
WDUG513B
(Gloss White)†
500 WDU513C
WDUG513C
(Gloss White)†
1190
285
1366
285
Styles of frames, leading, spice drawers and glazing vary according to range. Please specify left or right handing when ordering. † Gloss White units available for Salerno only.
112409_Koncept_Product_Spec_Guide.indd 26 03/03/2011 14:04
27
Worktop Dresser Unit -
Single Spice Drawer
GENERAL INFORMATION FRAMED GLAZED UNITS
Metallic Effect Width Code
Single Wall Unit
Diagonal Wall Unit (400 door)
Peninsular Wall Unit
Worktop Dresser Unit -
Three Spice Drawers
400 GDU472SL
500 GDU572SL
500 GDU590SL*
630 GDWU672SL
500 GPWU572SL
500 WDU512ASL
500 WDU513ASL
724
285
724or900
270
724
1190or1366*
285
Metallic Effect Width Code
Pan Drawer UnitThree pull-out drawers
Glazed Cooker Hood
500 WDU512BSL
500 WDU513BSL
800 PD86D3SL
400 OCH43SL
500 OCH53SL
600 OCH63SL
800 OCH83SL
1000 OCH103SL
1190or1366*
285
870
570
300
285
*Supplied on 18mm Excel Cabinet
Styles of frames, leading, spice drawers and glazing vary according to range.
Please specify left or right handing when ordering.† Gloss White units available for Salerno only.
• 10mm thick dresser spacer available in all carcas colour when fitted to 30mm worktops
e.g. granite or high def worktops.
PENINSULAR WALL UNITS
Width Code Width Code
Corner UnitSupplied rigid with door.
18mm Excel supplied with
spacer panel
Solid Unit Solid door to both sides
Glazed Unit Glazed door to both sides
Support Legs
Not available in Mezzo, Ivory
and Metallic
600 PCWU672
(Ready for Assembly)
500 PWU572
(Ready for Assembly)
500 GPWU572
(Ready for Assembly)
225 PWSL72
Support Frame
Support Strap
Spacer Panel(18mm only)
1765 Max PWSF
1765 Max PWSS
330 PWSP372
285
72418525
5025
724
270
724
270
724
A maximum of three wall unit cabinets may be used. These units
may be used alone, without a corner wall unit. The standard
15mm corner wall unit is supplied with two corner posts and
18mm Excel is supplied with one corner post and a blanking
panel, enabling further units to be run off this. The peninsular
support frame, strap and legs must be used when this occurs, as
shown. There is a 300mm door available which may be planted
onto the corner wall unit end or onto the end of the peninsular
wall unit run. Two are required, one for each side of the unit.
A maximum of three 500mm wall units can be used together
with the 630mm corner unit, giving an overall maximum run
size of 1830mm. Reduce support frame and strap to suit the unit
dimensions chosen.
18mm only
20
724
112409_Koncept_Product_Spec_Guide.indd 27 03/03/2011 14:04
Style 8
Plate Rack
Style 9
Wine Rack
Style 10
Plate and Wine Rack
500 ODMW8572
(Melamine)
ODGW8572
(Gloss White)†
500 ODMW9572
(Melamine)
ODGW9572
(Gloss White)†
500 ODMW10572
(Melamine)
ODGW10572
(Gloss White)†
285
724
28
BASE OPEN DISPLAY UNITS
Width Code
Style 1
Frieze and Gallery Rail
Style 8
Plate Rack
Style 9
Wine Rack
500 ODMB15
(Melamine)
ODGB15
(Gloss White)†
500 ODMB85
(Melamine)
ODGB85
(Gloss White)†
500 ODMB85
(Melamine)
ODGB95
(Gloss White)†
Width Code
Style 10
Plate and Wine Rack
Wicker Basket Unit
500 ODMB105
(Melamine)
ODGB105
(Gloss White)†
500 WBU56D
285
870
† Gloss White units available for Salerno only.
570
870
Styles vary according to range.
† Gloss White units available for Salerno only.
WALL OPEN DISPLAY UNITS
561mm Width Code
Wall Open Unit
Wall Open
Diagonal UnitNot suitable for use as
terminating unit or alone
Style 1
Frieze and Gallery Rail
Style 7
Gallery Rail
500 ODU556
630 OWU656
500 ODMW1556
500 ODMW7556
724mm Width Code
Style 1
Frieze and Gallery Rail
Style 3
Three Spice Drawers
Style 5
Frieze, Gallery Rail and
Three Spice Drawers
Style 7
Gallery Rail
500 ODMW1572
(Melamine)
ODGW1572
(Gloss White)†
500 ODMW5572
(Melamine)
ODGW5572
(Gloss White)†
500 ODMW7572
(Melamine)
ODGW7572
(Gloss White)†
285
561
724mm Width Code
Wall Open Unit
Wall Open
Diagonal UnitNot suitable for use as
terminating unit or alone. 18mm
Excel includes 2 spacer panels
300 ODU372
400 ODU472
500 ODU572
(Melamine)
ODG572
(Gloss White)†
630 OWU672
(Melamine)
285
724
500 ODMW3572
(Melamine)
ODGW3572
(Gloss White)†
112409_Koncept_Product_Spec_Guide.indd 28 03/03/2011 14:04
29
300 WWR372
(Melamine)
WWRG372
(Gloss White)†
300 WWR390
(Melamine)
18mm Excel only
WINE RACK AND SPICE DRAWERS
Width Code
Base Wine Rack
Wall Wine Rack(No plinth)
300 BWR3
(Melamine)
BWRG3
(Gloss White)†
Width Code
150mm
Spice/Wine Rack 150 SPWR15
285
870
285
724
285
724or900
Single Spice Drawer(Dresser Units
Open Display Units)
Set of
Three Spice Drawers(Dresser Units
Open Display Units)
496 SPICE1
* For use with 150mm wide spice/wine rack (SPWR15). Spice drawers are available
with finger pull fronts in Pearwood, Gloss White, Walnut, White, Mezzo, Blonde
Oak, Metallic.
159
Base/Wall Wine Rack
Spice Drawers
112 SPICE15*
120
140
153 SPICE5
WALL OPEN DISPLAY UNITS
724mm Width Code
Angled
Open Wall Unit 22.5°
Open unit only -
not available with door
Open Display
Unit Frame
252 AWU2272
500 ODUFRAME
900mm (18mm Cabinets) Width Code
Style 3
Three Spice Drawers
Style 5
Frieze, Gallery Rail and
Three Spice Drawers
Style 7
Gallery Rail
Open Display
Unit Frame
500 ODMW3590
(Melamine)
ODGW3590
(Gloss White)†
500 ODMW5590
(Melamine)
ODGW5590
(Gloss White)†
500 ODMW7590
(Melamine)
ODGW7590
(Gloss White)†
500 ODUFRAME90
Styles vary according to range.
† Gloss white units available for Salerno only.
900mm (18mm Cabinets) Width Code
Wall Open Unit
Wall Open
Diagonal Unit Not suitable for use as
terminating unit or alone.
Includes 2 spacer panels
Style 1
Frieze and Gallery Rail
500 ODU590
(Melamine)
ODG590
(Gloss White)†
630 OWU690
500 ODMW1590
(Melamine)
ODGW1590
(Gloss White)†
285
900
112409_Koncept_Product_Spec_Guide.indd 29 03/03/2011 14:04
30
GENERAL INFORMATIONGALLERY RAILS
Width Code Width Code Width Code
Straight Timber
Gallery Rail
500 GALLODV5
1200 GALL
Wing End Timber
Gallery Rail (Set of 2)
Available in Blonde Oak,
Pear, White,Walnut, Metallic
and Mezzo
WALL GALLWWE
BASE GALLBWE
Width Code
WING END UNITS
Width Code
Base Wing End
(Melamine)Square Wall Wing EndBlonde Oak
Modern Base
Wing End Blonde Oak, Pear
Modern Wall
Wing End Blonde Oak, Pear
45° Base Unit(400mm door)
285 BWE36
BWE36G (With gallery rail)
BWG36 (Gloss White)†
BWGG36 (With gallery rail)
305 WWQ372
305 WWQ390
305 BWV3622
(Veneered)
305 WWV37222
WWV39022*
(Veneered)
300 DBU36D45• 300 DBU36F45•
Square
Base Wing EndBlonde Oak
305 BWQ36
Wall Wing End
(Melamine)
285 WWE356
WWE356G (With gallery rail)
WWE372
WWE372G (With gallery rail)
WWG372 (Gloss White)†
WWGG372 (With gallery rail)
Tall Wall Wing End
(Melamine)
Styles vary according to range.
† Gloss White units available for Salerno only.
• Not available in Primo Zebrano or Primo Noce.* Available in 18mm Excel only.
570
870
870
900
724or900
561or724
285
724or900
870
285
285
570
285 WWE390*
WWE390G* (With gallery rail)
WWG390* (Gloss White)†
WWGG390* (With gallery rail)
Frieze 10 available in White, Gloss White, Birch/Pear, Walnut, Blonde Oak and Mezzo
Styles vary according to range.
† Gloss White accessories available for Salerno only.
FRIEZES
Frieze
Width Depth Height Code
500 – – FRIEZE5
500 – – FRIEZE5G
(Gloss White)†
1000 – – FRIEZE10
Base Unit
720 Wall Unit
900 Wall Unit
LPOSTCBU18
LPOSTWU7218
LPOSTWU9018
CORNER POSTS
Base Unit
560 Wall Unit
720 Wall Unit
RCPOSTBU
RCPOSTSWU56
RCPOSTTWU72
15mm CABINET 18mm CABINET
15mm Corner Posts matched to carcase colour (White, Pear, Blonde Oak, Mezzo, Ivory, Walnut or Metallic).
18mm Corner Posts matched to frontal choice (except Boston which is carcase matched).
112409_Koncept_Product_Spec_Guide.indd 30 03/03/2011 14:04
31
PILASTERS
Stainless Steel
Fluted PilasterAvailable in Oak
and Pear (Bromley) (cuttable)
Boxed PilasterAvailable in Birch/Pear
Chunky PilasterAvailable in Blonde Oak
Base to floor 50 x 870 PIL1087SL
Base/Wall 100 x 1046 FPIL1010
Dresser Unit 100 x 1366 FPIL1013
Larder Unit 100 x 2276 FPIL1023
Base/Wall 100 x 1046 BCPIL1010
Dresser Unit 100 x 1366 BCPIL1013
Larder Unit 100 x 2276 BCPIL1023
Wall 100 x 900 CHPIL1010
Dresser 100 x 1366 CHPIL1013
Larder 100 x 2276 CHPIL1023
Base 100 x 870 CHPIL1087
Size Code
Styles vary according to range.
2600 CONPLINTH (MFC) 2600 (200 high) CONPLINTH262 (MFC) (Available in White, Blonde Oak, Pear, Metallic, Walnut, Mezzo and Ivory) 2550 CONPLINTHG ((Salerno only - Gloss White) 2600 CONPLINTHDKO (Havana only - Dark Olive wood) 2600 CONPLINTHBC (Dakota only - Black textured) 2600 CONPLINTH28 (Primo Noche - Gloss PVC Wrapped) CONPLINT28ZZ (Boston only. Available in Gloss White, Gloss Black, Gloss Red, Gloss Latte and Gloss Ivory)
GENERAL INFORMATIONPLINTHS
Continuous Plinth
Decorative PlinthAvailable in Pear and Blonde Oak
Aluminium Effect
Plinth Seal(Use with continuous plinth)
Plinth
Connector Bracket(Use with continuous plinth)
3000 DECPLINTH30
3000 DECPLINTH35L
3200 CONPLINTHS
Size Code
– BRKPLINTH
Collared PilasterAvailable in Ivory
Base/Wall 100 x 1046 CPIL1010
Dresser 100 x 1366 CPIL1023
Larder 100 x 2276 CPIL1013
High Plinth Bracket 200 BRKPLINTH200
112409_Koncept_Product_Spec_Guide.indd 31 03/03/2011 14:04
32
Breakfast Bar Back Panels
MFC Back Panel(not colour co-ordinated -
except Mezzo 18mm only)
Block End Support Panel(colour co-ordinated)
Tray Platform
Filler Panels
Flyover Shelf
Planked Blender PanelsAvailable in Blonde Oak,
Pear and Painted Ivory
600 x 870 x 18 MFCBP687P
1200 x 870 x 15 MFCBP1287P
1800 x 870 x 15 MFCBP1887P
870 x 570 x 15 ES687P
870 x 570 x 18 ES687PM
(Metallic)
650 x 920 x 18 ESP6592P
300 x 570 x 15 TSP3X6P
720 x 300 x 18 BSP372P
720 x 300 x 18 BSP372PM (Metallic)
900 x 300 x 18 BSP390 P
2220 x 570 x 18 SHPANEL25
2220 x 570 x 18 SHPANEL25M (Metallic)
2750 x 285 x 18 SHPANEL30
Base Unit 920 x 650 PEBBU6
Tall Unit 2400 x 750 PEBLU621
Dresser Unit 1366 x 307 PEBWDU312
Breakfast Bar Back Panels 870 x 1000 BP1087PE
Wall Unit 920 x 307 PEBWU390
Size Code
Base Unit 920 x 650 BBU692DKO
Tall Unit 2400 x 750 BLU623DKO
Wall Unit 920 x 307 BWU690DKO
Breakfast Bar Back Panel 920 x 1800 BBBP1892DKO
Havana Blender Panels
Base Unit 920 x 650 BBU692BD
Tall Unit 2400 x 750 BLU623BD
Wall Unit 920 x 307 BWU390BD
Breakfast Bar Back Panel 920 x 1800 BBBP1892DBD
Base Unit 920 x 650 BBU6592NOC
Tall Unit 2400 x 650 BLU6523NOC
Wall Unit 970 x 309 BWU390NOC
Breakfast Bar Back Panel 920 x 1200 BBBP1292NOC
Dakota Blender Panels
Primo Noche Blender
Panels
FILLER, SHELVING AND BLENDER PANELS
112409_Koncept_Product_Spec_Guide.indd 32 03/03/2011 14:04
33
650w x 900h
900w x 900h
1000h x 350w
2700h x 150w
2700h x 350w
2700h x 650w
Wall Unit 920 x 307 BWU390ZZ
Tall Unit 2400 x 750 BLU623ZZ
Base Unit 920 x 650 BBU692ZZ
Breakfast Bar 1800 x 920 BBBP1892ZZ
Infill Spacers(Used in conjunction with
planked ends to keep units
in line)
Gloss White
Replacement
End Panel(18mm only)
(Salerno white only)
700mm
Deep Blender Panel
Luxury Shelving
Base and Tall Unit
Framing Panels
Decorative
Shelving Bracket4 brackets per shelf length
Boston Blender PanelsAvailable in Gloss Red, Gloss
Black, Gloss White, Gloss Latte
and Gloss Ivory
22mm thick
Worktop Blender PanelsAvailable in Stardust, Metallic,
Snow Spray, Wenge, Palisander,
Walnut, Everest Black and Sand.
38mm thick.
Carcase Matched
Blender PanelsAvailable in Pear, Walnut,
Mezzo, Metallic, White, Ivory,
Blonde Oak, Gloss White.
38mm thick.
794 x 56 ISP794
Base Unit 570 x 724 BUEPG672
Appliance Housing 570 x 1954 IFUEPG619
570 x 2130 IFUEPG621
Larder Unit 570 x 1954 LUEPG619
570 x 2130 LUEPG621
Oven Housing 570 x 1954 OHUEPG619
570 x 2130 OHUEPG621
Wall Unit 285 x 724 WUEPG372
285 x 900 WUEPG390
Breakfast Bar 1800 x 870 BBBPG1887
MFC 700 x 2276 x 18 LUEP723
Gloss White† 700 x 2276 x 18 LUEPG723
Planked 700 x 2276 x 18 PEBLU723
2600 x 305 x 22 SHPANEL2622 (Available in Pear, White, Blonde Oak, Walnut, Metallic, Mezzo and Ivory)
2600 x 305 x 22 SHPNL26227P (Available in Wenge)
2422 x 307 x 22 SHPANL2422ZZ (Boston only. Available in Gloss Red, Gloss White, Gloss Black, Gloss Latte and Gloss Ivory)
2600 x 650 x 22 SHPANEL26622 (Available in Pear, White, Blonde Oak, Walnut, Metallic, Mezzo and Ivory)
SHPNL266227P (Available in Wenge)
– BRKDECSH
Size Code
† Gloss White available for Salerno only.
650w x 900h CVB406590
900w x 900h CVB400990
1000h x 350w CVB401035
2700h x 150w CVB403015
2700h x 350w CVB403035
2700h x 650w CVB403065
CMB406590
CMB400990
CMB401035
CMB402715
CMB402735
CMB402765
FILLER, SHELVING AND BLENDER PANELS
112409_Koncept_Product_Spec_Guide.indd 33 03/03/2011 14:04
34
Painted Tangent Cornice
3000 COR30P
(Foil Wrapped - Blonde Oak,
Gloss White† and Ivory)
Traditional
Style Cornice
Traditional Style Pelmet
Universal Cornice
and Pelmet
Modern Tangent Cornice
Modern Tangent Pelmet
Veneered Coved Cornice
Plain Veneered Pelmet
Castellated Cornice AttachmentFor use with UPSC30VREV
Reversed Veneered Pelmet
Reversible
Veneered PelmetAvailable in plain/castellated
Light Baffle
3000 UPS30P
(Foil Wrapped - Blonde Oak,
Gloss White† and Ivory)
3000 CORT30P
(Foil Wrapped - White, Blonde Oak,
Walnut, Metallic, Mezzo and Pear)
3000 UPST30P
(Foil Wrapped - White, Blonde Oak,
Walnut, Metallic, Mezzo and Pear)
3000 CORCOV30V
(Birch/Pear and Blonde Oak)
3000 UPS30V
(Blonde Oak)
3000 CORCATT30
(Birch/Pear)
3000 UPSC30VREV
(Birch/Pear)
3000 FLPS
Length Code
55mm
55mm
35mm
45mm
55mm
60mm
55mm
20mm
65mm
† Gloss White Cornice and Pelmet suitable for Salerno only.
3000 CORPEL30
(Pear, Blonde Oak, White, Walnut,
Metallic, Mezzo, Ivory)
CORPEL30ZZ
(Gloss Latte, Gloss Black, Gloss White,
Gloss Red and Gloss Ivory)
3000 CORT30V
(Painted Ivory/Tangent Oak Veneer)
CORNICE AND PELMET
3000 UPST30V
(Painted Ivory/ Tangent Oak Veneer)Painted Tangent Pelmet
112409_Koncept_Product_Spec_Guide.indd 34 03/03/2011 14:04
35
MASON MITRE JOINTSBullnose worktops can also be supplied with a factory cut mitred joint and
jointing bolts for assembly on site.
BULLNOSE WORKTOP MASON MITRE PLANNER600m m deep - 4100mm max. length.
Double bullnose up to 900mm deep - 3600mm max. length.
Please allow an extra 23mm for male to female connections and an extra
30mm for corner post situations.
BULLNOSE WORKTOP MASON MITRE PLANNER 650MM DEEP
Please allow an extra 23mm for male to female connections and an extra
30mm for corner post situations. Can be used in conjunction with 600mm
deep mitres.
PVC EDGED WORKTOP MASON MITRE PLANNERUse existing Worktop Mason Mitres for a selection of PVC edged worktops,
with the exception of 18, 19, 20, 44 and 45 which are not available due to
radius ends.
BULLNOSE WORKTOP RADIUS END DIAGRAMMaximum length for double bullnose up to 900mm deep - 3600mm.
Current Radius End Variations
WORKTOP CUTTING DETAILS FOR DIAGONAL “BUILT-UNDER” OVEN HOUSING UNIT/ PAN DRAWER UNIT.
WORKTOP SPLAY ENDSWorktops can be supplied cut to match base wing end units. Please specify
left or right hand end:
NB: Z Dimension should be against a false wall
BASE UNIT X Y Z 600 1072 804 1137
GENERAL INFORMATION WORKTOPS
112409_Koncept_Product_Spec_Guide.indd 35 03/03/2011 14:04
36
30 880 3600 PF30
40 880 4060 PF40Bullnose Worktops
Double Bullnose
Worktops
Postformed
Upstands 12mm
PVC Edged WorktopsMetallic, Multiplex, Everest Black, Stardust, Riverside Beige, Riverside Grey, Snow Spray, Sand, Pearwood, Blonde Oak, Palisander, Walnut, Copper Slate, Grey Slate, Light Concrete, Stella Mare, Stella Trattoria and Indian Granite
30 665 or 900 3000 DP30
40 665 or 900 3600 DP40
95 12 3000 PFUP3095
40 665 3600 PV40
40 900 3600 DV40
Height Width Max Length Code
Hi Definition
Worktops Bullnose 30 880 3600 PFHD30
Hi Definition Worktops
Double Bullnose 30 900 3000 DPHD30
Edging Tape
PVC Worktop Edging 4.5m
‘L’ Shape Worktop
Jointing Strip
30 WTEDG3
40 WTEDG4
EDGSTRIP45
30mm STRIPALP306
thick (Aluminium)
40mm STRIPALP4010
thick (Aluminium)
Size Code
White Support Leg
Only available in White
870 LEGBAR
(60mm diameter)
‘T’ Shape Worktop
Jointing Strip
30mm STRIPALT306
thick (Aluminium)
40mm STRIPALT4010
thick (Aluminium)
Earthstone Surface
Worktop 34 900 1800 SO3490
Earthstone Surface
Worktop 34 650 3600 SO3465
WORKTOPS
WORKTOPS ACCESSORIES AND JOINTING STRIPS
112409_Koncept_Product_Spec_Guide.indd 36 03/03/2011 14:04
37
WORKTOPS ACCESSORIES AND JOINTING STRIPS
Size Code
Chrome Support Leg
870 CHRLEG
(25mm diameter)
LEGBARCX
(60mm diameter) (Deluxe)
Aluminium End Cap
30mm STRIPALS306
40mm STRIPALS4010
Earthstone Surface
Customer Care Kit
SOCAREKIT
Earthstone Surface
Splashback
600mm SOBACK675
900mm SOBACK975
Earthstone Surface
Edging Tape
3600mm EDGETSO36
910mm EDGETSO91
Earthstone Surface 50ml
Cartridge+2 Mixer Taps
SOCART50
Earthstone Surface
Applicator Gun
SOAPGUN
Earthstone Surface
Installation Kit
SOINTKIT
Earthstone Surface
Upstand
1800 SOUP1810
100
Earthstone Surface
Splashback
700 SOSBACK775
750
Earthstone Surface
Individual Mixer Tips SOMIXTIP
112409_Koncept_Product_Spec_Guide.indd 37 03/03/2011 14:04
38
45° pull out DPLBASK45
Wirework Code
Wine Rack insert
WRSHELF3CX
(300mm unit)
WRSHELF5CX
(500mm unit)
Le Mans Pull
Out Corner
LEMANSCU
(1000mm unit
500mm door
opposite handing
to CBU)
Chrome Pull-out
Larder BasketsPLUBASKCX1620
Chrome 1/2
Carousel Baskets(for 1000BU with 500 door
/1200BU with 600 door only)
CAROBASKCH850 dia
Double Towel Rail METALTRAIL430
90
Wirework Code
Chrome Cookery
Book Support(For use with midway rail)
CBOOKSUPPCX
(315mm)
Extra Chrome Hooks(For use with midway rail)
SHOOKCX
(12pk)
Chrome Basket
with Runners
PBASK5CX
(450x464mm)
PBASK6CX
(450x564mm)
Pull Down Basketfor easy access to wall units
(can only be used in 500 units)
SPRINGBASKCX
Wine Glass RackGLASSCOL2
(300mm Cabinet)
(Pack of 2)
Chrome Kitchen
Roll Holder(For use with midway rail)
KRHCX
(300mm)
Chrome Spice Rack(For use with midway rail)
SPICERACKCX
(294mm)
Magic Corner(To be used with CB106FA/
CB106DA/CB106FC/CB106DC)
MCULCX
(Left Hand)
MCURCX
(Right Hand)
2 boxes
Chrome 3/4 Carousel CAROBASKCX
Two Tier Bottle Rack DOORBASKTCH
100
410
390
Single Tier Bottle Rack DOORBASKSCH
390
100100
Chrome Midway Rail
and hooks
MWRAIL10CX
(1000mm)
Chrome Shelf Basket(For use with midway rail)
SHELFBASKCX
(294mm)
Wicker Basket(Pack of 2)
(c/w Runners)
WICKBASK
700 dia
ACCESSORIES
112409_Koncept_Product_Spec_Guide.indd 38 03/03/2011 14:04
39
ACCESSORIES
CTRAYGAL874V
(462 x 710)
CTRAYGAL174V
(462 x 910)
Metallic
Cutlery Tray
Utensil Tray(Standard Drawer)
UTRAY8 (800mm)
UTRAY10 (1000mm)
Aluminium Pan
Drawer Organisers(Deep Drawer)
DW47ORG8
(800mm)
DW47ORG10
(1000mm)
Aluminium Jar Organisers(Deep Drawer)
DW47JAR8
(800mm)
DW47JAR10
(1000mm)
Drawer Mats*
To be used with Aluminium
Cutlery Inserts
DWMAT8(800mm)
DWMAT10(1000mm)
Drawer Organisers Code
800 Cutlery Tray(Metallic wide pan drawers)
CTRAYGALL8SV
(Silver)
Supra Drawer Box
Cutlery Tray
CTRAYSUPR5V
(433x420)
CTRAYSUPR4V
(333x420)
CTRAYSUPR6V
(533x420)
Timber
Cutlery Tray(Standard Drawer)
CTRAY8PK
(800mm)
CTRAY10PK
(1000mm)
800 Pan Drawer Dividers(Metallic wide pan drawers)
DWDIVGALL8
(Silver)
Drawer Organisers Code
Drawer Plate Stack(276mm Deep Drawer)
Utensil Tray
and Knives(Standard Drawer)
Aluminium
Cutlery Inserts(Standard Drawer)
Orgawing 800/1000mm Pan Drawer
PDPLATESTK8
(800mm)
PDPLATESTK10
(1000mm)
UTRAY8KNIFE
(800mm)
UTRAY10KNIFE
(1000mm)
CTRAYGALL8M
(800mm)
CTRAYGALL10M
(1000mm)
ORGAWING
112409_Koncept_Product_Spec_Guide.indd 39 03/03/2011 14:04
40
SU12LINER(1200mm) SU10LINER(1000mm)
SU9LINER(900mm)
SU8LINER(800mm)
SU6LINER(600mm)
SU5LINER(500mm)
Tambour Kit(Metallic Effect)
TAMB513SL
SWINGBINCH
12 litres
(400mm unit min)
Aluminium Support
System Extras
Worktop Bracket WTMOUNTBAR
Decorative Leg(Pack of 4) Chrome
ADJCHRLEG
Waste Storage Code
Tandem Waste BinDo not use with
170˚ hinge
Eco-binDo not use
with 170˚ hinge
Triple Waste BinDo not use
with 170˚ hinge
Deluxe Waste Bin
110° hinged door only(will not fit under sink bowl)
ECOBIN3
(300mm min)
1 x 20 litre
1 x 10 litre
RECYCLEBIN
(500/600mm unit)
1 x 19 litres
1 x 12 litres
1 x 9 litres
ECOBIN4
(400mm only)
1 x 18 litres
2 x 8.5 litres
365525
250
450
260 dia
280
Miscellaneous Code Miscellaneous Code
60l Eco Bin
(suitable for full height units
only)
ECOBIN60L
(600mm unit only)
1 x 30 litres
2 x 15 litres
Ventilation Grill
Coloured
Glass SplashbackAvailable in Pewter, Bride,
Ebony, Chalk White.
(Bride will be supplied as
standard unless specified
otherwise)
Stainless Steel
Splashback
VENTGRILL 200
GLSPLASH675
600(w) x 750mm(h)
GLSPLASH975
900(w) x 750mm(h)
GLSPLASH1075
1000(w) x 750mm(h)
SBACK675
600(w) x 750(h)
SBACK775
700(w) x 750(h)
SBACK975
900(w) x 750(h)
Glass Shelf
Deco BracketBRKDECGLSH
80
550
Sink LinerPlease note:1000 and 800 Sink Liners will not work in corner base units if the corner post is not in the middle of the unit
Coloured Glass UpstandAvailable in Pewter, Bride,
Ebony, Chalk White
(Bride will be supplied as
standard unless specified
otherwise)
GLUP1014
1000mm(w) x 140(h)
supplied in pack of 2
Glass Shelves (Frosted)
GLSHELF6F
(600 x 247mm)
GLSHELF8F
(800 x 247mm)
GLSHELF10F
(1000 x 247mm)
Aluminium
Support System
UNITSUP10AU
(1000x600mm)
UNITSUP20AU
(2000x600mm)
UNITSUP6AU
(600x600mm)
1
2
3
4
1. UNITSUPENDAU(Pack of 2 ends
2. UNITSUP120AUIsland Pack -
880 x 2000mm
use with UNITSUP20AU3. UNITSUPLEGAU(Pack of 2 Legs)
4. UNITSUPDEC20(3000mm)
Decorative Strip
Laminate SplashbackAvailable in Stardust, Snow Spray, Wenge, Walnut, Everest Black, Sand, Riverside Beige, Pearwood, Copper Slate, Lunar Night HD, Lunar White HD, Bella Noche HD, Bella Capri HDPalasandea.
WTSB24X6
(2440 x 600)
WTHDSB24X6
(Hi Def - 2440 x 600)
WTSB24X12
(2440 x 1200)
WTHDSB24X12
(Hi Def - 2440 x
1200)
WTSBACKEND
(End Cap)
WTSBACKBUT
(Butt Joint)
WTSBACKCNR
(Corner Joint)
ACCESSORIES
112409_Koncept_Product_Spec_Guide.indd 40 03/03/2011 14:04
41
LIGHTING
HD LED Light Range Code Qty Power Description
HD Spot Light LEDSURFHD 1 1.65w
Can be surface or recessed fitting.
Order driver LEDHDTFORM6 or
LEDHDDIMMER separately
HD Square Light LEDSQSURFHD 1 1.25w
Surface fitting only.
Order driver LEDHDTFORM6 or
LEDHDDIMMER separately
HD Over Cabinet Light LEDCORHD 1 1.65wOrder driver LEDHDTFORM6 or
LEDHDDIMMER separately
HD Delta Light LEDDELTAHD 1 2.15wOrder driver LEDHDTFORM6 or
LEDHDDIMMER separately
HD Delta Light with
on/off touch sensorLEDDELTAHDS 1 2.15w
Built in on/off sensor. Can also switch
up to two non sensor HD lights. Order
driver LEDHDTFORM6 separately
GX53 LED Light LEDSURFACE 1 24v / 15wStainless steel. Surface or recessed
fitting. Driver not required.
GX53 LED Bulb LEDREPBULB 1 24v / 15w Replacement GX53 LED light fitting
HD 24v Driver LEDHDTFORM6 1 24v / 15w
Use to power any combination of
HD lights. Combined wattage of
connected lights must not exceed
driver wattage. 6 way output.
HD 24v Driver with
remote control on/off &
dimming function
LEDHDDIMMER 1 24v / 30w
Cannot be used with HD
LEDDELTAHDS. Combined wattage
of connected lights must not exceed
driver wattage. 12 way output.
Touch sensor -
On/Off Control or Door
Sensor
LEDSWITCH 1 n/a
Two functions - use as touch on/off
switch or behind a cupboard door to
activate internal lighting. Cannot be
used with lights with built in sensor.
Use only with LEDHDTFORM6 driver
HD LED Light Accessories Code Qty Power Description
LED Surface Light Range Code Qty Power Description
LED Surface Light Accessories Code Qty Power Description
112409_Koncept_Product_Spec_Guide.indd 41 03/03/2011 14:04
42
LIGHTING
Task LED Strip Light Range Code Qty Power Description
250mm LED Task Strip
LightLEDSTRIP25 1
Includes 1m mains connection lead
and clips for fitting. Each light can be
linked together or with optional link
cable. No driver required.
330mm LED Task Strip
LightLEDSTRIP33 1 240v / 4.5w
Includes 1m mains connection lead
and clips for fitting. Each light can be
linked together or with optional link
cable. No driver required.
550mm LED Task Strip
LightLEDSTRIP55 1 240v / 8w
Includes 1m mains connection lead
and clips for fitting. Each light can be
linked together or with optional link
cable. No driver required.
240v / 2.7w
500mm Light Link Cable LEDSTRIPCON 1 n/aUse to link one LED task strip
to another
Task LED Strip Light Accessories Code Qty Power Description
50mm RGB Strip Link/
Corner CableFLEXIRGB50 1 n/a
Use to link one LED RGB strip to
another. Not for RGB surface light.
12v RGB Driver &
ControllerLEDTFORM4RGB 1 12v / 15w
Driver & 4 functions controller. On/
off, 2 auto settings & manual. 4 power
ports, combined wattage of connected
lights must not exceed driver wattage.
12v RGB Driver & Remote
ControlRGBDRIVER30 1 12v / 30w
Driver & Remote control with 4
functions. On/off, 2 auto settings &
manual. 4 power ports, combined
wattage of connected lights must not
exceed driver wattage.
Colour Changing RGB LED Light Accessories Code Qty Power Description
Colour Changing RGB LED Light Range Code Qty Power Description
300mm LED RGB Colour
Changing Flexible Strip
& 2.5m RGB Strip Driver
Connection Cable
LEDFLEXI3RGB 1
7 colour light output. Adhesive
backing for fast and easy installation.
Supplied with driver connection
cable. Each light can be linked
together or with optional link
cable. Order driver LEDTFRM4RGB
& or RGBDRIVER30 separately - see
options below.
Colour Changing Round
Surface Light
LEDSURFRGB 1 12v / 1.25w
7 colour light output. Supplied
with adhesive pad for fast and
easy installation. Order driver and
remote control LEDTFRM4RGB &
or RGBDRIVER30 separately. Driver
connections allow a maximum of 4
lights per driver.
240v / 1.8w
112409_Koncept_Product_Spec_Guide.indd 42 03/03/2011 14:04
43
Flexible LED Strip Light Range Code Qty Power Description
300mm LED Cool White
Flexible StripLEDFLEXI3WH 1 12v / 0.8w
Cool white light output. Adhesive
backing for fast and easy installation.
Each light can be linked together or
with optional link cable. Order driver
separately LEDTFRMFXCON.
300mm LED Cool Blue
Flexible StripLEDFLEXI3BL 1 12v / 0.8w
Blue light output. Adhesive backing for
fast and easy installation. Each light
can be linked together or with optional
link cable. Order driver separately
LEDTFRMFXCON.
2m LED Cool White
Flexible StripLEDFLEXI2MWH 1 12v / 5w
Cool white light output. Adhesive
backing for fast and easy installation.
Each light can be linked together or
with optional link cable. Order driver
separately LEDTFRMFXCON.
2m LED Cool Blue
Flexible StripLEDFLEXI2MBL 1 12v / 5w
Blue light output. Adhesive backing for
fast and easy installation. Each light
can be linked together or with optional
link cable. Order driver separately
LEDTFRMFXCON.
LIGHTING
Flexible LED Strip Light Accessories Code Qty Power Description
1.5m Link Cable FLEXILINK15 1 n/a Use to link one LED strip to another
500mm Link Cable FLEXILINK5 1 n/a Use to link one LED strip to another
50mm Link/Corner Cable FLEXILINK50 1 n/aUse to link one LED strip to another.
Can also be used around corners.
12v/15w Driver & 2.5m
Driver Connection CableLEDTFRMFXCON 1 12v / 15w
Use to power any combination of
LED strips. 6 power ports. Combined
wattage of connected lights must not
exceed driver wattage.
Touch Sensor - On/Off
Control or Door SensorLEDSWITCH 1 n/a
Two functions - use as touch on/off
switch or behind a cupboard door to
activate internal lighting. Cannot be
used with lights with built in sensor.
Use only with LEDHDTFORM6 driver
2.5m Driver connection
cableFLEXICON 1 n/a
Connects light strip to driver
distribution block.
112409_Koncept_Product_Spec_Guide.indd 43 03/03/2011 14:04
40mm
40mm
870
724
561
146
861
2100
900
724
561
870
146
146
40mm
44
INSTALLATION
BROOM AND LARDER UNITSTimber batten screwed to wall at internal
dimensions of unit and screwed through to
timber batten.
BASE UNITSBracket secured to side panel of
unit and screwed through to wall.
Bracket position adjustable over
the top 66mm of the unit.
WALL UNITSScrew through the top and bottom
back rails/hardboard back. Fixing points
in the bottom rail should be vertically in
line with those in the top rail.
Fixing points should be located at each
end of the unit as shown, no more
than 100mm from the inside face of
the unit.
WALL UNITS WITH TWO DOORSThese require a further fixing
at the mid point of the top rail.
15mm Vista
112409_Koncept_Product_Spec_Guide.indd 44 03/03/2011 14:04
‘A’
37 37
2100/2
276 2000/2176mm
2273m
m
146
45
INSTALLATION
Fit the hanging brackets to the top corners of the units from the back using
four of the screws supplied per bracket. The hanging brackets should be
screwed to the side panel first and then to the top panel as per the assembly
instructions.
Determine the location of the unit(s) and mark a horizontal line 2176/2000mm
from the floor. Mark the position of each unit. Fit the hanging bracket plates
to the wall as illustrated.
BROOM AND LARDER UNITSTimber batten screwed to wall at internal
dimensions of unit and screwed through to
timber batten.
When fitting the units, attach to the wall the hanging plates and make all
adjustments. Remove the unit from the wall and drill through the back and
vertical upright as indicated (A). Secure the unit with additional screws to a
structural part of the wall.
18mm Excel
FIXING POINTS• Wall units are supplied with wall hanging brackets. The brackets are
adjustable for height and distance from the wall. When fitting the units
attach the unit to the wall hanging plates and make all adjustments (see
diagram at the top of the page).
Remove the unit from the wall and drill through the back and vehicle back
uprights as indicated. Secure the unit with additional screw to a structural
part of the wall.
• IMPORTANT:
Any screws and other fixings used must be suitable to support the units,
when loaded, into the material they are to be fitted.
112409_Koncept_Product_Spec_Guide.indd 45 03/03/2011 14:04
46
GUIDANCE NOTES
DELIVERY AND STORAGE ON SITE
ALWAYS:
• Store units, worktops and other items under
cover, in dry conditions, immediately.
• Store loose shelves separate from units.
• Protect unit fronts.
• Cover units during storage to prevent dirt
and debris collecting on moving parts such as
drawer runners and hinges.
• Avoid twisting and distortion.
• Store worktops upright or flat, face to face on
bearers with the top surface protected against
damage.
NEVER:
• Store units on their sides unless they have soft,
grit-free material underneath.
• Stack base units more than three high.
• Stack wall units more than four high.
• Stack frontals against each other or against a
wall.
• Store units, worktops and other items near
direct heat.
• Remove tapes from doors or drawers until
immediately before fitting.
Customers must check units as they are delivered
and sign for them as being in good condition. If
they are not, the driver’s copy of the advice note
must be marked accordingly and signed by the
customer.
INSTALLATION METHODSConsideration should be given to following trades
when allowing access to electrical points, rodding
eyes, stop taps, waste traps and any other items
or areas where post completion access will be
required.
To prevent any accidental damage to the doors
and drawers always remove them from the units
and store carefully away from the working area.
Any sleeving protection should remain on until
they are refitted to the units and adjustment has
been carried out.
Having checked the plot for level and square,
commence by marking a level line on the wall
around the base unit area to indicate the finished
unit height.
FITTING KITCHEN UNITSUnits should be packed up or scribed down as
little as possible. We recommend a maximum of
6mm packing with firm material where required.
Scribing down should be 10mm maximum, but
this depends on any appliances fitting under
worktops. Please check manufacturers46’
appliance sizes before scribing down in excess of
10mm.
If ceramic tiles are to be fitted to the floor after
the kitchen has been installed, scribing down of
the units will be unnecessary.
Should it be necessary to scribe the rear of the
units, then this must be as little as possible
especially if integrated appliances are to be fitted
into tall units or under worktops.
Kitchen base units should be fixed to the wall
using the metal cabinet fixing bracket supplied
(18mm Excel). The appropriate fixing should
be dependent upon the surface being fixed to.
It is not necessary to fix through every bracket
on a run of units, but fixings either side of an
appliance space and on the ends of each run of
units must be made.
Tall units (oven housings, larders, etc.) should be
level and plumb on all faces and fixed to the wall
at four points.
Wall units are to be fixed level and square using
hanging brackets if appropriate, or directly to the
wall through the back rail where the following
number of fixings should be used:
30046mm to 600mm wide unit 4 fixings
800mm to 1000mm wide unit 5 to 6 fixings
1200mm wide unit 6 fixings
Fixings for standard walls should be 21/2”
No. 10 counter sunk screws or longer. Dryline
walls (dot and dab) will require longer hollow wall
fixings, depending on the thickness of the dab
and the type of block work being screwed into. It
is essential to use the correct fixings and to check
screws match the correct plug size being used.
Units should be screwed together at three
positions, preferably hidden from view (e.g. by
hinge block, back rail on base units and behind
shelf on wall units).
All visible screw heads should be capped with
colour caps. Recessed caps (10mm) are available
for white carcase interiors.
Extended voids (over 600mm wide between end
panels) under worktops, especially corner units,
and adjacent to worktop joints, should have
supporting battens fixed to the wall beneath.
APPLIANCE SPACESCare should be taken when leaving spaces
for freestanding and integrated built-under
appliances.
Built-under integrated spaces should be 603mm
maximum. This will allow for easy installation
and removal without causing problems with door
alignment.
600mm integrated and cantilever cooker hoods
require 600mm at the back and front of the void.
Freestanding appliances should have a minimum
space 10mm greater than their width to allow
easy installation/removal.
Adjacent units to appliance spaces must be plumb
and parallel.
Hose positions for dishwasher and washing
machines are critical especially on integrated
appliances. Dishwasher hoses should be led
through an aperture, cut at low level into the
side panel at the rear of the adjacent sink unit,
for connection to services within that unit.
Washer hoses will have holes drilled at top level
in the side panel at the rear of the sink unit if
connecting to service in the unit.
When fitting any appliances the manufacturer’s
installation instructions must always be read prior
to any installation and followed throughout.
When fitting ‘wet’ appliances ensure that hoses
do not become kinked or trapped when the
appliance is pushed home.
FILLERSFiller panels are to be scribed to walls and sealed
with matching decorator’s filler and not silicone.
15mm or smaller fillers where seen, should be
edged in exterior cabinet matching colour.
Tray spaces or any site constructed platforms
should have the front edges to match the cabinet
colour exterior.
PLINTHContinuous plinth will be cut and edged at the
unit run ends to finish flush with the cabinet end
panel. Cabinet exterior matching edging tape
should be applied to the raw coreboard with
contact adhesive. Peel and stick edging or hot
melt adhesive is not recommended.
Ventilation slots as found cut on standard transit
plinths on kitchen units must be cut in the
continuous plinth for oven, fridge or freezer
housings. The slot is approximately 500mm long
and 40mm deep and must be cut on the upper
edge of the plinth.
Plinths should be fitted tight to the underside of
the bottom panel of the base unit and not pushed
to the floor. The plinth adds additional support to
the bottom panel by keeping it up tight.
Plinths should never be glued or nailed to cabinets
as this prevents easy removal.
READY TO ASSEMBLEA wide range of base and wall units and colour options are available in fl at pack format for ease of storage and quick, easy assembly on site. Please ask your Symphony
representative for information.
For the installation of kitchen fitments (in compliance with BS6222 part 4, 1998)
112409_Koncept_Product_Spec_Guide.indd 46 03/03/2011 14:04
47
GUIDANCE NOTES
CORNICE AND PELMETCornice and light pelmet mitres should be clean
and accurately cut using a fine mitre saw.
Fixing cornice should be from above. If this is
impossible, fixing from the inside of the cabinet
is recommended. When fixing from the inside of
the cabinet, 10mm recessed screw caps should be
used and 1” x No. 6 CS screw. If longer screws
are used and not recessed they should be covered
by a matching cover cap.
Light pelmet can be fixed direct through the wall
unit bottom or with half blocks/L brackets. A
mixture of both methods of fixing is acceptable
especially when fixing to display feature units.
All mitres should be glued using PVA wood
glue or Cyanoacrylate adhesive. Under no
circumstances must hot melt adhesive be used.
Only minor discrepancies in the cut should be
filled with matching filler waxes, (not silicone).
Direct fixing should be positioned as close to the
end panels as possible for both pelmet and
cornice. The number of fixings per unit size are as
follows:
300mm to 600mm wide unit 2 fixings
800mm to 1000mm wide unit 3 fixings
The third fixing for 800/1200 units to be by the
centre post.
Cornice should be inset on all wall unit/tall unit
returns so that the front lip of the flat (fixing)
base
of the cornice is inset by 15mm, but fitted with
the front edge of the unit’s top panel on the
elevation.
Pelmet should be inset by 15mm on wall unit
returns but flush with the front edge of t47he
bottom shelf on the elevation. In this way the
appearance of a uniform recess will be achieved
when the unit door
is closed.
WORKTOP FIXINGWorktops should be fixed to the base units and
independent tops to wall battens, and levelled in
both directions.
The tops are fixed through the brackets or half
blocks on the base unit end panels, and up
through the front rail.
The fixings in the front rail should be as close to
the end panel as possible and by the centre post
on a double base or corner unit.
Mason Mitre and butt joints should be flush
fitted. And three jointing bolts need to be used
on all kitchen worktops unless they are reduced
in depth or width. A coat of silicone* should be
used to seal the worktop ends prior to jointing.
If the back of the worktop has been scribed to
the wall it should then be re sealed with silicone*
before installation. Take special care if sealing
behind a sink.
Hob and sink cut outs should also be sealed with
silicone* and the chipboard should be cut and the
dust then cleared away. Then silicone* should be
applied to ensure all holes are filled.
*It is recommended that RTV Silicone to
BS5889(B) be used in all cases.
AFTERCARE INSTRUCTIONS• The tape from all doors and drawers should be
removed by hand, without the use of a sharp
implement.
• Any marks subsequently left should be cleaned
off using warm water and a mild detergent.
• DO NOT attempt to clean units, worktops or
sink tops with cleaning powder or any form of
abrasive material or agent.
• Drawer runners and hinges should be cleaned
to ensure that no plaster, grit or other material
will impede their action.
For the installation of kitchen fitments (in compliance with BS6222 part 4, 1998)
112409_Koncept_Product_Spec_Guide.indd 47 03/03/2011 14:04