koe - minnparfiles.minnpar.com/partbooks/excavator manuals/koehring and bantam...a numerical parts...

KOE

6644 hydraulic excavator

Serial No. ___ _

I ~I KOEHRING ... , CRANES & ~ EXCAVATORS .

Litho In USA 12261-119

USING THIS PARTS BOOK

This Parts Manual has been designed for optimum ease of reading and is the key to Customer-Distributor-Factory communication. Genuine replacement parts along with interchangeable product improvements as they become available will keep your machine in a reliable and productive condition.

The following instructions describe the features of the manual and how to use it effectively.

Use this manual also as a supplement to the Operator's Manual and Maintenance Manual when performing service procedures on the machine.

IMP 0 R TAN T

This manual lists serviceable parts for EVERY machine built of this model designation. Serial numbers are used to identify parts when a product improvement is made or an alternate component is used. KNOW THE SERIAL NUMBER OF YOUR MACHINE before searching for replacement parts.

The PARTS GROUP INDEX shows the functional arrangement of associated parts for the machine. A group number identifies the same group of parts regardless of model (Group [][] is always the hydraulic system). The groups which apply to the machine are listed in numerical order. A letter suffix to a group number I 25A I is used for variable or optional parts groups.

PAGE NUMBERS are in numerical sequence within each parts group. The first number is the group number and the second number is the numerical sequence number. Letter suffixes are used to maintain continuity to the manual as revisions are incorporated (1.1, 1.2, 1.2A, 1.2B, 1.3, etc.).

A NUMERICAL PARTS LIST at the front of the manual shows all part numbers in numerical sequence keyed to the pages where they can be found. Also, a part number can be cross referenced to verify whether the part is a valid serviceable part or if there is a current replacement part.

EXPLODED VIEW ILLUSTRATIONS show the relationship of assembled parts. The illustrations are keyed to an accompanying parts list on the same page or on the facing page and are positioned for ease in reading the manual.

- INSTRUCTIONS FOR ORDERING PARTS -

When ordering parts, contact your nearest Koehring Crane and Excavator Group distributor and give the following information to assure prompt service:

MACHINE IDENTIFICATION:

State the model and serial number .... located on a metal plate in the Operator's Cab.

PART IDENTIFICATION:

State the part number, description and quantity required. Do not use the item number. Avoid using the words "Pairs" or "Sets."

SHIPPING INSTRUCTIONS:

State the invoicing address. Unless otherwise specified, invoices will be mailed to the shipping point.

State the correct shipping address and the means of shipment ... parcel post, air mail, air freight, UPS, bus, etc.

o o

I~IKOEHRING ...... CRANES & - EXCAVATORS

MODIL NO. 11111.1." NO.

'--__ ..JIIL---__ -" o 0

REF. PART NO. DESCRIPTION QTY.

707 6594 Gear ............ 1

INVOICE TO: SHIP TO: Mid State Equipment Ace Construction Co. Milwaukee, WI Madison, WI

- LOCATING INDIVIDUAL PARTS -

1. Turn to the PARTS GROUP INDEX and find the general area of the part in question (Example: Seat would be found in "Operator's Cab & Machine Housings" Group 27).

2. Refer to the parts group and check to see if a subsequent letter-

NOTE.

PARTS GROUPS

DESCRIPTION GROUP NO.

Crawler & Carbody .................... a Turntable, Fuel Tank .................. m Counterweight ....................... II!

. II Engine ............................. . Power Take.Off ...................... m Swing System ........................ Em Pump Drive Case ..................... Ell Hydraulic System ..................... Em Air System .......................... m Operator's Cab & Machinery Housing .... II Operator's Controls, Piping & Linkage ... Em Guards, Rails, Steps, Mirrors, Catwalks .. Em Nameplates & Decals ................. Em Heating & Air Conditioning ............. m Electrical System ..................... Em H9rn, Wiper, Floodlights, Accessories ... EIl Tools, Paint, Powerluber & Accessories .. Em Hoe Attachment ...................... m logger Attachment ................... m

Block numbers correspond to group block numbers on parts pages.

REF. PART NO.

I Page 1.2 2 Page 1.2 3 Page 1.2 4 Page 1.7 5 Page 1.8 6 Page 1.9

7 {U359E9030 U359E9031 r 310V3375 8 1. 332V2600

9 ..r 310v4145 LU334v3401 10 -[ 310V3362 340V3331

PRIOR SERIAL #21106

QUANTITIES LISTED ARE FOR BOTH CRAWLER ASSEMBLIES. RIGHT HAND CRAWLER FRAME PARTS ILLUSTRATED.

OESCR I PTI ON _Q:r~..:.

Idler Tumbler Assembly ...... 2 Spring, Recoi I .............. 2 Cyl inder, Adjusting ........ 2 Roller, Lower ............... 18 Roller, Carr ier ............ 6 Track Assembly ............. 2 Frame, RH Crawler (Shown) ... I Frame, LH Crawler ........... I Capscrew, 3/4c x 4 Gr 5 ..... 72 Lockwasher, 3/4 ............. 72 Capscrew, Gr 8 .............. 24 Washer, Hardened ........... 24 Capscrew, 3/4c x 5-1/2 Gr 5. 12 Locknut, 3/4c Gr 5 .......... 12

"J~(1\j OGIH '!:"'. PI\P.TS, SPECIFY MODEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

11U"\ KOEHRING ~ CRANES&

EXCAVATORS CRAWLER ASSEMBLY

----_._---- PAGE 1.1

ITEM 8 INSPECT SEAL WHENEVER GREASE " , VALVE HAS BEEN LOOSENED. I' REPLACE IF NECESSARY. ,. " liTEM 7 TORQUE GREASE VALVE TO 100 FT. ! t .. LBS. DRY, UNCOATED '; ... ~

". " '~ COMPLETE IDLER GROUPS ARE INTERCHANGEABLE. " BEFORE ORDERING INTERNAL PARTS CHECK IDLER WHEEL OR SLIDE BLOCKS FOR VENDOR MAKE AND ORDER FROM CORRESPONDING PARTS COLUMN BELOW . ...

REF PART NO. PART NO. PART NO. Berco PettiWest intertrack

ITm or ITs) (I) PrlorSer. 121035

0901V3488 090lV3495

(U359089951) (U35908995-2) (l00mm Cyl.)

U422VOl37 U422V0080 U901V3490

2 901V2094 901V2004 901V1395 3 901V3079 901V2006 901V1459 4 901V2096 901V2008 901V1408

4A { 5 U901V3487 U901V3246 U901V3491

5A -[ 901V3858 901V1411 58 901V4101

6 U901V2234 U901V2792 U901V3492

7 901V2235 901V2798 901V1294 8 901V2111 901V2799 901V1277 9 901V2110 901V2783 901V1297 10 901V2108 901V2784 901V2795

{310V3239 310V3239 11 316V3145

340V3127

PART NO. DESCRIPTION QTY. Intertrack

(I) Begin Ser. 121035 U901V3489 Idler & Recoil Group .......................... 1

(Incl. Items 1 thru 10) (U35908ge5-3) (125mm Cyl.)

U901V3490 Wheel w/Slide Bars ........................... 1 (Incl. Items 2,3 & 4)

901V1395 Bushing ............................................. 2 901V1459 Seal Group ........................................ 2 901V1408 ORing ............................................... 2 901V1406 Shaft .................................................. 1 29089 Pin, Roll ............................................. 1 U901V3491 Spring Group ..................................... 1 901V3858 Bolt .................................................... 4 901V1411 Lockwasher ....................................... 4 901V4102 Yoke .................................................. 1

U422V0098 Adjusting Cylinder Group .................. 1

901V1278 (Incl. Items 7,8,9 & 10)

Valve, grease .................................... 1 901V1277 Seal ................................................... 1 901V1276 Seal ................................................... 1 901V3754 Seal, Wiper ....................................... 1

Capscrew, M16 x 65 Gr 8 ................. 8 316V3145 Capscrew. S/8C x 4 Gr 8 ................... 8 340V3127 Nut, S/8C Gr 8 ................................... 8

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

i 0 L E R TUM B L ERA S S EM B L Y

DISCONTINUED PARTI REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PARTIS)

3

ITEMS 3,9,11,15 & 19 COAT THREADS WITH LOCTITE No. 242, SCREWLOCK.

ITEM 5 COAT MATING SURFACES LIGHTLY WITH OIL. KEEP OUTSIDE SURFACE OF SEALS AB SOLUTELY FREE OF OIL OR GREASE.

ITEM 12 TORQUE CAPSCREWS (15) to 25 IN. LBS.

REF.

2 3

4 5 6 7 8 9

10 11

MEASURE GAP BETWEEN BEARING CARRIER (7) AND RETAINER CAP (13). INSTALL SHIMS EQUAL TO GAP. TORQUE CAPSCREWS TO 160 FT. LBS.

PART NO. DESCRIPTION

U335F1527 Case Ass'y Track Drive .. Spec.Ord. (For Parts, See Pg. 1.4) 334V3002 Washer, Hardened ...... 310V3721 Capscrew .............

(1" x 3 1/2" . GR.5) 359A7413 Spacer ................ 461V1518 Seal .................. 361A3381 Spacer ................ 361C3375 Carrier, Bearing ....... . 334V2664 Washer, Hardened ...... 316v3315 Capscrew .............

(3/4" NC x 2 1/4" GR.5) 361A3377 Retainer ............... 316V3335 Capscrew .............

(3/4" NC x 23/4" . GR.8)

9

QUANTITIES FOR BOTH TRACTION DRIVES LISTED. RIGHT HAND DRIVE PARTS ILLUSTRATED.

OTY. REF. PART NO.

2

12{

406V4007 406V4006

16 406V4005 16 13 36183384

14 334V2402 2 15 310V3175 4 2 16 35907444 2 17 361A3382

40 18 371V3300 16 19 310V3394

2 20 360V0417 12 21 U404V3321

15

DESCRIPTION

Shim (.005") ............ Shim (.007") ............ Shim (.020") ............ Retainer, Cap .......... Washer, Hardened ...... Capscrew ............. (5/8" NC x 2 1/4" . GR.5) Sprocket, Drive ......... Ring, Blocker .......... Washer (Cupped) ....... Capscrew ............. (3/4" NC x 2" GR.5) Plug (3/4") ............. Bearing ...............

WHEN OROERING PARTS, SPECIFY MOOEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

1"1 KOEHRING ~ CRANES& EXCAVATORS

TRACTION DRIVE SPROCKET & TRANSMISSION

PAGE 1.3

OTY.

6 6 4 2

12 12

2 2 2 4

2 2

J ~ II ,,,;c," BI~ 1=111 Ch'i 3 PLACES = I 2 Z ~ 47

Q i" "f""\ I \ ~ -I

~ -t Y' ::D en

"'" m J:o ~

6 PLACES

i ~,

>

34

.~ 35 //'~ -. / 34 // 11 ~J

/~/y ~ /' 30 / '. @ /r}i~ 29 / {jj

~, Z .,., < (JJ s:

0 s:: 0 m r-;;:: (JJ c:::

(JJ s: '" m

HOUSING 0 ?l en

(SEE NOTES) m Z :l:I i>

0 r-;;:: J:o c::: s: (JJ '" m m :l:I

J:o z

J:o 0 0 (JJ m en

(JJ '"' :l:I :;;;

-< -I (5 ;;:: ,

36 I

37

16 I

r~"

4U / ~"' .. , - 41.. '. " co,,, ~ ~:; / .... ;!};Cl!J (SEE NOTES) m '" c. 42 0 fJ

00 ~ ~. 43 4/,.. 0","" "A" 11 ~.. iI;' 44 /"., '"'' "'" g, I\)

NOTES APPLY LOCTITE NO. 515, PLASTIC GASKET TO MATING SURFACE BETWEEN HOUSING & COVER.

ITEMS 8, 11, 18 &22 COAT THREADS OF FASTENERS WITH LOCTITE NO. 242, SCREW LOCK.

ITEM 11 TORQUE TO 100 FT. LBS. MIN, 225 FT. LBS. MAX, TO ALIGN FLATS WITH LOCKPLATE (10). PER ES 100.1

ITEM 17 ASSEMBLE BEAR CARRIER APPLY-ING LOCTITE NO. 89, SEALANT, BETWEEN CARRIER & HOUSING.

ITEM 45 COAT ADAPTER SPLINES WITH N EVER-SEEZ, ANTICORROSION COMPOUND.

3 PLACES

18

~ !;B 1111111 a"':': 1D=a il il~

Q 2 c :%l C m ::! z C'l .." ::-:%l

-t -I .V>

::D V> .."

l> rn ~ Z "T'I -< en 5 3:

c c m ,....

en z c: en 5 co

m

0 ?" V>

Z m ::! ::-

0 ,.... z

REF.

l> c: s: en co '" m :%l ::-

l> z 0

en c m en V> ..,

:%l 2 ~ :;;

-< -I C 3

Z C

4 "T'I

.." ::- 5 :%l -I 6 :%l m ~

~ Irl~l~ m 0'; C 7 8 9

Ul'" g-~

10 11

~ 12 I')

. 13 I') 14

~ ~1

ASSEMBLE BELLEVILLE SPRINGS AS SHOWN.

INSTALL BEARINGS ON PINON AS ILLUSTRATED.

PART NO. DESCRIPTION

U335F1527(CF) Case Ass'y, Transmission Spec.Ord. (Includes All Parts listed

Below) 310V2846 Capscrew .............

(1/2"NC x 1" . GR.5) 360v0417 Plug, Pipe (3/4") ........ 316V3104 Capscrew .............

(5/8" NC x 3 114" . GR.5) 310V3190 Capscrew .............

(5/8" NC x 7" . GR.5) 364A2892 Spacer ................ 310V3185 Capscrew .............

(5/8" NC x 1 112" . GR.5) 353V5202 Pin, Dowel ............. 403V2601 Bearing, Ball .......... 1 359A5994 Ring, Retainer .......... 359A5787 Retainer ............... 359C8681 Shaft ................. 316v3130 Capscrew .............

(5/8" x 1" . GR. 5) 361A1464 Cover ................. 316V3344 Capscrew .............

(3/4" x 1" - GR. 5)

OTY.

2

2 2

6

1 6

2

1 1 1 4

1 4

REF. PART NO. DESCRIPTION OTY. REF. PART NO. DESCRIPTION OTY.

15 359C4108 Gear, 3rd Reduction ..... 1 30 404V3111 Bearing ~ .............. 2 16 U404V4014 Bearing Assembly ...... 1 31 359C4105 Pinion, 2nd Reduction ... 1 17 359C7418 Carrier, Bearing ........ 1 32 359B4196 Spacer ................ 1 18 310V2846 Capscrew, Soc. Hd ...... 6 33 359C4104 Gear, 1st Reduction .... '.: __ .. ~.

(1/2" NC x 1" . GR.5) 34 403V2980 Bearing ............... 2 19 359B7521 Carrier, Bearing ........ 1 35 359C6527 Pinion, Motor .......... 1 20 460V0416 ORing ................ 1 36 316V2745 Capscrew, Soc. Hd ...... 8

{ 406V4013 Shim (.020) ............. 1 (1/2" NC x 6" STL.) 21 406V4012 Shim (.007) ............. 3 37 361C1859 Cover ................. 1

406V4011 Shim (.005) ............. 3 38 359A4102 Spring ................ 2 { 316V2728 Caps crew ............. 4 39 460V0406 O-Ring ................ 1

22 (1/2" NC x 1 112" - GR.5) 40 359C6263 Piston ................ 1 332V2200 Washer, Lock (1/2" STD.) . 4 41 -[ 460V0405 O-Ring ................ 1

23 359B4111 Retainer ............... 1 42 359C6264 Cylinder ............... 1

{ 406V2815 Shim (.020) ............. 1 365B1538 Gasket (1 each) ......... 2 24 406V2805 Shim (.007) ............. 3 43 359B6262 Plate, Thrust ........... 1

406V2814 Shim (.005) ............. 3 44 --[ 365C0020 Plate ................. 6 25 310V3185 Capscrew ............. 3 372V1311 Disk, Friction .......... 5

(5/8" NC x 1 112" GR.5) s-.-[ 359C7216 Adapter ............... 1 26 404V3022 Bearing ............... 4 U353V1624 Pin ................... 1 27 359C4107 Pinion, 3rd Reduction ... 4a-[ 362V4401 Plug, Pipe (Inc. O-Ring) ., 1 28 359C4106 Gear, 2nd Reduction .... 460V0885 Ring,"O" .............. 1 29 404V3922 Bearing ............... 47 420V3887 Breather .............. 1

REF. PART NO.

- U2.88C2656-099

1-355A2.381 300V22.78

_ U334v2.664 U288c2704 IA

316V2.306

333V2003 u359C7908 (cF) U359D8631 (cF)

I' 359A7913-001 tF) 4 1.359A7913-002f;F)

316V2305

5 333V2003 340V2323

3

DESCRIPTION

Motor, Traction ............ 2 (For Parts See Pg. 1.6, Sheet 1 of 2)

Gasket... .... .. .. .. .. . . . . .. 2 Bo 1 t, Lac k. . . 8 Washer, Hardened ............ 8 Valve, Counterbalance ...... 2 (For Parts See Pg. 1.6, Sheet 2 of 2)

Capscrew..... .. .. .. .. . .. . .. 8 (3/8"NC x 3/4" Gr. 5) Lockwasher (3/8")........... 8 Cover, Motor(Excavator) .... . Cover, Motor ............... . (Logger & Kane Loader) Guard, RH(Shown) ........... 1 Gua rd, LH................... 1 Capscrew.. . ... .. . . . .. . . . . ... 4 (3/8"NC x 1-1/2" Gr. 5) Lockwasher (3/8")........... 4 Nut, LockO/8"NC Gr. A)..... 4

WHEN ORDERING PARTS, SPECIFY MODEl NUMBER, SERIAL NUMBER AND DESCRIPTIDN OF PART REQUIRED

I rli KOEHRING ~.CRANES& EXCAVATORS

TRACTION MOTORS & COVERS PAGE 1.5

REF.

I 2

3 4

PRIOR SERIAL #21106

PART NO. DESCRIPTION -------_.- -_ ..

4

2 Required Per Machine Quantities Listed Are For One Motor Assembly

U288C2656-099 Motor, Tract ion ...... ..

9014089 Kit, Viton{Repl.901 3601) .

901 3602 901 4024 460 0330 460 0352 460 0079

(Includes All Items Marked With an Asterisk *)

Ring, Retainer ........... *Sea 1, V iton{Repl.901 3603). *O-Ring .................... *O-Ring .................. *O-Ring {Tube Fitting) ..... .

(Included In Kit,Not Shown)

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

KOEHRING CRANES & EXCAVATORS

TRACTION MOTOR ASSEMBLY PAGE 1.6

Sheet 1 of 2

3 4

22

11

RELIEF VALVE ASSEMBLY

to 100-105 Ft. Lbs.

19 18 17 16

REF. PART NO. DESCRIPTION QTY. ---------- --~--------. --_._-

U288C2704 Valve, Counterbalance .. 901 3619 Ki t, Sea I .............. I

(Includes All Parts Ma rked Wi th An Asterisk "J

901 3620 Ki t, Rei i ef Va I ve ...... (Includes All Pa rt 5 Marked Wi th A Dot ")

I 901 3621 Ring, Retainer ......... 2 901 3622 ;.!:Sea 1, Ring ............. 2 3 901 3623 Spring, Pressure ....... 2 4 460 0208 "O-Ring ................. 2 5 1160 0120 *O-Ring ................. 2 6 901 3624 Plug wiD-Ring .......... 2 7 901 3625 Screw, Socket Hd ....... 4 ~ 901 3626 *0- Ring .................

15 14 13 12

REF. PART NO.

9 901 3627 10 901 3634 II 901 3628 12 460 6003 13 901 3629 14 901 3630 15 901 3631 16 901 3670 17 460 0812 18 901 3632 19 901 3633 20 90lV3851 21 90lV3861 22 90lV3862 23 90lV3863

1218-284

1

2 Requ i rea-Per-Mach i ne Quantities Listed Are Fa One Valve Assembl .

--, / \

Install ~ck-Up Ring W/Radius Or ientat-ed As ~2 .. lllustrat",g.

DESCRIPTION

Ba II, Steel ............ *O-Ring .................

Valve, Re lief .......... "*0- Ring ................. "*Ring, Back-Up ..........

Spring, Pressure ....... '*Sea I, Step wiD-Ring .... *O-Ring ................. "*O-Ring .................

Spring, Pressure ....... o*Nut, Seal Lock .........

Sc rew ................. *PI ug ............. '" ., .

Screw, Sock Hd Metric .. Screw, Sock Hd Metric ..

*O-Ring (Tube F itt i ng) .. (I nc I uded in Kit But Not Illustrated)


lU"I KOEHRING ~ CRANES&

EXCAVATORS COUNTERBALANCE VALVE ASSEMBLY

PAGE 1.6

QTY.

I I 2 I I I I I I I I I 2 2 8 2

Sheet 2 of 2

2 4

REF. PART NO.

OS OS Berco Italtractor

ITm or ITs

U422V0037 U422V0039

{ N/S N/S N/S N/S 2 N/S N/S 3 90lV2010 90lV2049 4 N/S N/S 5 90lV2014 90lV2047 6 N/S N/S

7 { N/s N/S 8 N/S N/S 9 N/S N/S

10 U90lV2212 90lV2055 II N/S N/S 12 90lV2018 90lV2053 13 N/S N/S 14 N/S N/S

11

\0

COMPLETE ROLLER ASSEMBLIES ARE INTERCHANGEABLE. I BEFORE ORDERING INTERNAL PARTS CHECK ROLLER FOR VENDOR MAKE AND ORDER FROM CORRESPONDING PARTS COLUMN BELOW.

OESCR I PTI ON

Intertractor

U422VOl29 Roller Assemb I y ............ (I nc I. Parts Li s ted Below)

N/S Bol t ........................ 3 N/S Lockwasher .................. 3 N/S PI ug .......... " ............ I

901V2240 Sea I ........... " ... , ....... N/S Cover ....................... I

90lV3307 Sea I ........................ I N/s Bol t ............... , ....... 2

Plate, Lock ................. I Lockwasher ............. , .... 2

N/S Reta i ner .................... I N/S Bearing Ass I y .............. 2

901V2229 Seal Group .................. N/S Shaft .......................

90lV3301 Sea I, Shaft. ................ N/S Ring, Retainer .............. N/S Collar Assemb I y ............


IIIWI KOEHRiNG .... CRAHES& EXCAVATORS

CARRIER ROLLER ASSEMBLY PAGE 1.7

4

REF. PART NO.

DS DS Bereo Italtractor

ITm or ITs

U422V0035 U422V0036

I N/S N/S 2 U90lV2095 90lV2006 3 90lV2032 90lV2008 4 N/s N/S 5 90lV2036 90lV2004 6 90lV2003

6A { 90lV2029 90lV2028 7 90lV2030 90lV2039 8 90lV2033

COMPLETE ROLLER ASSEMBLIES ARE INTERCHANGABLE. BEFORE ORDERING INTERNAL PARTS CHECK ROLLER FOR VENDOR MAKE AND ORDER FROM CORRESPONDING PARTS COLUMN BELOW.

DESCRIPTION QTY.

Intertraetor

U412V9222 Ro Iler Assemb I y .... (I ne I. Parts Li s ted Below)

901VI461 Collar, End .......... , ....... 2 29087 Seal Group ................... 2 901VI408 O-Ring ....................... 2

N/S Shaft. ....................... I 90lVI395 Bushing ...................... 2 90lVI396 Plug w/Gasket. ...............

Plug ......................... Gasket ....................... I

30 I 1462 Pi n .......................... 2 Ring, Thrust ................. 2

WHEN OROERING PARTS. SPECIFY MODEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REOlllRED

1"-1 KOEHRING ~~::~RS LOWER ROLLER ASSEMBLY

____ ._. ______ ....l ......... ___ . _______ _____ . ___ .. _. __ .. _.

DISCONTINU NUMERIClll PARTS LIST FOR REPLACEMENT PART(S) PAGE 1.8

4

IMPORTANT

WHEN ORDERING TRACK ASSEMBLIES OR PARTS. IDENTIFY THE FOLLOWING BEFORE ORDERING:

1 CHECK VENDOR MAKE. THIS IS INDICATED ON THE CHAIN LINKS BY: I

BERCO ,Tm ,Ts

USE CORRESPONDING PARTS COLUMN FOR ORDERING.

2. IF ORDERING LINK PARTS, CHECK PIN FOR INDENTATION ON ENDS. THIS INDICATES THAT THE ITEMS ARE PART OF THE MASTER LINK

3 IF ORDERING SHOES. CHECK SHOE LENGTH (24", 30", 36") AND TYPE ITRIPLE GROUSER, SINGLE GROUSER, FLA TI

PRIOR SERIAL #21149

MASTER LINK PIN MARKED WITH AN INDENTATION

ON BOTH SIDES

2

COMPLETE TRACK GROUPS ARE INTERCHANEABLE. INTERNAL PARTS MUST BE IDENTIFIED. REFER TO SERVICE MANUAL FOR CORRECT TORQUING PROCEDURE

REF. PART NO.

OS OS OS Berco Italtractor Ita ltractor

(Sealed)

U422VOO40 u422VOO19 U422V0145

901V2113 901V1586 901V1586

U422VOl14 U422VOl16 U422V0144

901V2958 901V2566 901V2566

U422VOO90 U422VOO92 U422V0143

90lV2959 901V2567 901V2567

ITEMS BELOW INCLUDED IN ALL ABOVE

2 901V2115 90lVl870 901VI870 90lV3011

3 901V2114 90lV2142 901V2142 U901V2128 U90lV2580

TRACK LI NK PARTS

4 901V2125 90lV2134 901V2134 5 90lV2124 901V2135 90lV2135 6 90lV2120 90lV2138 90lV2138 7 901V2121 901V2140 901V2140 8 901V2116 901V2145

MASTER LINK PARTS

4 901V2123 901V2136 901V2134 5 901V2122 901V2137 901V2135 6 901V2118 901V2139 901V2139 7 901V2119 901V2143 901V3752 8 901V2116 901V2145 9 901V2117 901V2144 901V3753

DESCRIPTION QTY,

OS Intertractor

U422VOO41

901V2088

u422VOl15

901V2956

U422VOO91

Track Ass' y, 36", .... " .... (Inc!. Items 1 thru 9)

Shoe06" Triple Grouser).,. 50

Track Ass' y, 30".,., ...... . (Inc!. Items I thru 9)

ShoeOO" Triple Grouser) ... 50

Track Ass' y, 24" .......... . ( I nc I. I terns I t h ru 9)

90lV2086 Shoe(24" Triple Grouser) ... 50

TRACK ASSEMBLIES

901 v2084 Bo 1 t (3/4"). ................ 200 Bol tOO" only) ............ 200

901 v2085 Nut. ....................... 200 U901V2130 Chain, Link (50 Links) ..... 1

901V2077 90lV2078 901V2081 901 V2080

901 V2077 901V2078 901V2079 901V2083

901V2082

(Incl. Items 4 thru 9)

Link, Track (RH) ........... 49 Link, Track (LH) ........... 49 Bushing, Track ............. 49 Pin, Track ................. 49 Seal, Washer (Cupped) ...... 196

Link, Master (RH) ........ ,. Link, Master (LH) ........ ,. 1 Bushing, Mster ......... , ... 1 Pin, Master................ 1 Seal, Washer (Cupped) .. ,... 4 Spacer (Collar)............ 2

WHEN OROERING PARTS, SPECIFY MOOEL NUMBER, SERIAL NUMBER ANO DESCRIPTION OF PART REOUIREO

1 "I KOEHRiNG ... CRANES& ~ . EXCAVATORS TRACK ASSEMBLY ----.---------t PAGE 1.9 --_._-------_._-_ .. _._---

DI';!'ONTINUFO PAIH' RHFR ERICAl PARTS LIST FO.R REP! ACEMENT PART(S)

SERIAL #21149 THRU #211"

IMPORTANt

WHEI\j ORDERING TEACK ASSEMBLIES OR PARTS, IDENTIFY THE FOLLOWING BEFORE ORDERING:

CHECK VENDOA MAKE THIS IS INDICATED ON THE CHAIN

LINKS BY' BERCO

,Tm

USE CORRESPONDING PARTS COLUMN FOR ORDERING

IF ORDERING LINK PARTS, CHECK PIN FOR INDENTATION

ON ENDS THlt, INDICATES THAT THE ITEMS ARE PARi OF THE MASTER LINK

IF ORDERING SHOES. CHECK SHOE LENGTH AND TYPE iTR!PlE GROUSER, SINGLE GROUSER, FLAT)

COMPLETE TRACK GClOUPS ARE INTERCHANEAB~E, INTERNAL PARTS MUST BE IDENTIFIEO,

REF. PART NO. DS DS

Berco I taltractor

U422VOl64 U422VOl65

90lV2113 90lVI586

2 90lV2115 90lVI870 3 90lV2114 90lV2142

U90lV2128

TRACK LI NK PARTS

4 90lV2125 90lV2134 5 90lV2124 90lV2135 6 90lV2120 90lV2138 7 90lV2121 90lV2140 8 901 V21 16

HASTER LINK PARTS

4 90lV2123 90lV2134 5 90lV2122 90lV2135 6 90 I V2118 90lV2139 7 90lV2119 90lV3752 8 90lV2116 9 90lV2117 90lV3753

3

~ I


ON BOTH SIDE5

DESCRIPTION QTY.

Track Ass'y, 35 5" ...... (I nc I. Items I thru 9) Shoe (35.5" Triple Grouser) .. 52

Bol t, 3/4" ............... 208 Nut .................... 208 Chain, Link (52 1 inks) ....... I (I nc I. Items 4 thru 9)

Link, Track (RH) ........... 51 Li nk, Track (LH) ............ 51 Bushing, Track ............ 51 Pin, Track ............... 51 Sea I, Washer (Cupped) ........ 204

Li nk, Ma 5 te r (RH) ............ Li nk, Master (LH) ............ Bushing, Master ............. Pin, Master .................. I Sea I, Washer (Cupped) ........ 4 Spacer (Collar) .............. 2

REFER TO SERVICE MANUAL FOR CORRECT TORQUING PROCEDURE

WHf.N OROERING PARTS, SPECIFY MODEl NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIHED

IIIWI KODIRiNG ~ CRAHES& EXCAVATORS

TRACK ASSEMBLY PAGE 1.9A

OISl'ONTINUU) PoUlt' RfHH \IME fllCAL PARTS LIST FOR REPLACEMENT PART IS)

BEGIN SERIAL #211 _

MPORTANT

WHEN ORDERING TRACK ASSEMBLIES OR PARTS. IDENTIFY THE FOLLOWING BEFORE ORDERING:

1 CHECK VENDOR MAKE. THIS IS INDICATED ON THE CHAIN LINKS BY:

BERCO ,T I

USE CORRESPONDING PARTS COLUMN FOR ORDERING

2. IF ORDERING LINk PARTS, CHECK PIN FOR INDENTATION ON ENDS THIS INDICATES THAT THE ITEMS ARE PART OF THE MASTER LINK.

3 ,a: ORDERING SHOES, CHECK SHOE LENGTH AND TYPE ITRIPLE GROUSER. SINGLE GROUSER. FLATt

COMPLETE TRACK GROUPS ARE INTERCHANEABLE. INTERNAL PARTS MUST BE IDENTIFIED.

REF. PART NO.

Berco Italtractor Intertractor

U422V0158 u422V0159 U422V0160

U422V0161 U422VOl62 U422VOl63

U422V0155 U422V0156 U422VOl57

901V3978

U422VOl52 U422VOl53 U422VOl54

90lV3979


ON BOTH SIDES

DESCRIPTION

Track Ass'y, 29.5" STD ...... (I ncl. Items I thru 8) Shoe (29.5" Double Grouser). Track Ass'y, 29.5" STD ...... (I nc I. Items I thru 8) Shoe (29.5" Triple Grouser).

Track Ass'y, 29.5" ES ....... (I nc l. Items I thru 8) Shoe (29.5" Triple Grouser).

Track Ass'y, 35.4" ES ....... (I nc l. Items I thru 8) Shoe 05.4" Triple Grouser}.

QTY.

52

52

52

52

REt=ER TO SERVICE MANUAL FOR CORRECT TORQUING PROCEDURE

I TEMS BELOW I NCLUDED I N ALL ABO)lLT~~c;.'-U\_?SE~BLJ ES

2

3

4 5 6 7

4 5 6 7 8

901V3980 90lV3981 90lV3982

TRACK LINK PARTS 901V3984 901V3983 90lV2081 90lV2080

MASTER LINK PARTS 90lV3984 90lV3983 90lV2079 90iv2083 901V2082

Bolt, 7/8" .................. 208 Nut ......................... 208 Chain, Link (52 Links) ...... I

(Incl. Items 4 thru 8)

Link, Track (RH} ............ 51 Link, Track (LH} ............ 51 Bushing, Track .............. 51 Pin, Track .................. 51

Link, Master (RH} .......... . Link, Master (LH} .......... . Bushing, Master ............ . Pin, Master ................ . Spacer, Collar .............. 2

WHEN OROERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

1"'1 KOEHRiNG ~ CRANES& EXCAVATORS

TRACK ASSEMBLY

PAGE 1 _ 9B

REF.

2 3 4 5 6 7

PART NO.

359D8827

U359C 7808 U359C8824

. U359C8826 20082400-065 334V3002 340V3726 U359A7030 310V3394 3j4V1664

4

~-

QUANTITIES LISTED ARE FOR BOTH CRAWLER FRAMES. R.H. CRAWLER FRAME SHOWN

DESCRIPTION QTY.

T,ack Guide Assembly ...... (Includes I tems I thru 7)

Guide, Track ...... 16 Guide, Track, RH Rear .. 2 Guide, Track, LH Rear...... 2 Spacer . " ... 20 Washer, Hardened .... 40 Locknut, IC Gr. A .......... 20 Bo It, Track ........... 20 Cap,crew, 3/4C x 2 Gr. 5 ... 4~ Wa,her, Hardened ......... 40

WHEN ORDERING PARTS, SPECifY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION DF PART REOUIRED

1 ""1 KOEHRING ~ CRANES& EXCAVATORS

TRACK GUIDES PAGE 1.10

DIStONTINUfO PART' REFER NUMERICAL PARTS LIST FOR REPI ACEMENT PART(S)

TORQUE BOLTS (84) TO 970 FT. LBS. DRY 3------_ 640 FT. LBS. LUBED

2-----o~I

I 2

3

U359E7888 35907859

f 310v3915 - L. u334v3002

PRIOR SERIAL #21106

POSITION INNER RACE SOFT SPOT _,"",~ .... ~~---(MARKED WITH STAMPED S)

TOWARD SIDE OF MACHINE

Carbody.................... 1 Gear, Ring................. I Capscrew, Gr. 8 ............ 84 Washer, Hardened........... 84


PI" KOEHRING ~ CRANE5&

EXCAYATqRS CAR BODY & RING GEAR

PAGE 1.11

TORQUE BOLTS (84) TO 970 FT. LBS. DRY -3------_ 640 FT. LBS. LUBED

2----1

BEGIN SERIAL #21106

POSITION INNER RACE SOFT SPOT ""''----(MARKED WITH STAMPED S)

TOWARD SIDE OF MACHINE 3-----

REF. PART NO. DESCRIPTION Q.TY. Prior Ser. Beg i n Ser.

#21149 #2114 I U359E9186 U359E9300 Carbody ................... 2 359D7859 35907859 Gear, Ring ................ I

[. 359D7859 35907859 Gear, Ring ........ 1 2 -1 I. 902V0408 902V0408 Sea 1, Upper & Lower ...... 2

3 -{ 310V3915 310V3915 Capscrew, IC oX 6 Gr 8 ..... 84 334V3002 334v3002 Washer, Hardened .......... 84 4 U359C9183 U359C9307 Cover ..................... I

5 { 316V2306 316V2306 Capscrew, 3/8c x 3/4 . ..... 7 333V2003 333V2003 Lockwasher ................ 7 6 359A9395 Block, Gu ide .............. 4 7 359A9388 Shim ..................... . 4 8 35989396 Keeper .................... 4 9 359A9383 Block, Stop ............... 4

10 1200-270 Capscrew, IC x 2-1/2 . ..... 4


I IIWI KOEHRiNG ar... ~::ttRS CARBODY & RING GEAR ---.....:.----.. --.. -._- ----'----------------------------i

DISCONTINUEO PART' REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

DATE. Rev i sed 1 1-88 MODEL. 6644E

PAGE IA.l

1 12

REF.

2

3 4

5

6

7

8

'J

10

II

12

BEGIN SERIAL #21106

PART NO.

Prior ser'l Begin Ser. ~2 I I 49 #21 14')

S"c ParJe 1.2

Sec Paqe 1.2

S"c Paqe 1.2

See Paqe 1.7

See Paqe 1.8

See Paqe 1.9

_{ U359E9170 U359E9171

{ 310V3375 332V2600

_[ 310v4145 334V3401

1- 310V3362 1 340V3331 .{ U359C920 I

_ U359C9202 -r 310V333'.l L 334v2664

U359E932i.l U359E9329

310V3375 332V2600 310v4145 334V3401 310V3362 340V3331 359C9308 359C9308 310V33,)9 33 1lV2664

OUMHITIFS liSTED ARE rnR 130111 Cf1AWLER ASSEMBLIFS RIGHT tiMID CRAWLFR FRAMF PARTS ILLUS rnA I ED.

DESCRIPTION

Idler Tumbler Assembly .... 2

Spring, Recoi I............ 2

Cyl inder, Adjustin'J....... 2

Ro 1 Ie r, LOVie r . . . . . . . . . . . . . 18

Ro I Ie r, Ca r ric r .......... .

Track Assenlb I y ........... .

Frame, Craviler (LH) ...... . Frallle, Craviler (RH)....... I Cap,creVl, 3/4C x 4 Gr 5... 72 Lockvlasher, 3/4........... 77 CapscreVl, Gr 8............ 24 Washe r, Ha rdened. . . . . . . . .. 211 Capscrevl, 3/4C / 5-1/2 Gr 5. 12 Locknut, 31 11C Gr 5........ 12 Cover, RH ................ . Cover, LH................. I Capscrevl, 3/4c y 1-3/4 G5 5. 12 Washer, 3/ 11........... 12


1"'1 KOEHRING ~ CRANES& EXCAVATORS D~~.C __ Rl_'v_i_"(~_.1-_8-,-7 __ __ CRAWLER ASSEMBLY PAGE 11\.2 ----------------'----------------------_ .. _----

DISCONTINUED PARTI REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PARTIS)

ITEM 14 INSPECT SEAL WHENEVER GREASE VALVE HAS BEEN LOOSENED. REPLACE IF NECESSARY.

ITEM 13 TORQUE GREASE VALVE TO 100 FT. LBS. DRY, UNCOATED

COMPLETE IDLER GROUPS ARE INTERCHANGEABLE. BEFORE ORDERING INTERNAL PARTS CHECK IDLER WHEEL OR SLIDE BLOCKS FOR VENDOR MAKE AND ORDER FROM CORRESPONDING PARTS COLUMN BELOW.

REF.

2

3 4 5 6 7 8 9

10

1\ 12

13 14 15 16 17

18

PART NO.

(Intertrac) U422V3003

U90lV4056

U90lVI392

90lVI396 90lVI395 90lVI459 90lVI408 90lVI406 90lAI410 90lV4126

{ 90lV3858 90lVI411 U90lV4055 U90lV4054

90lVI278 901V1277 90lV4085 90lV4086 90lVI276

{ 346V3145 340V3127

DESCRIPTION

Idler & Recoil Group (Includes Items I thru 17) Wheel w/Sllde Bars ......... . (Includes items I thru 10) Wheel Assembly (Includes 3 & 4)

QTY.

Plug. I t II ,t. I Bushing 2 Sea 1 Group.................. 2 O-R 1 n9...................... 2 Shaft............... ... 2 Pin, Roll 2 Bar, SI ide II 2 Bol t "............ 4 Lockwasher 4 Spring Group................ 1 Adjusting Cylinder Group I (includes Items 13 thru 18) Valve, Grease Sea 1 Cylinder II II Piston Seal, U-Cup

Capscrew, 5/8c x 4 Gr.8 8 Nut, 5/8c Gr.8 8

17

~8

.~3 ,. 14

15


'K KOEHRING ...... CRANES & .. EXCAVATORS IDLER ASSEMBLY PAGE IA.2A

REF.

2

3

4 5

6

BEGIN SERIAL #21106

PART NO.

Prior Sere #2114 35909162

{ 1200-370 1209-94 { 310 3305 319 3504

1209-94 1209-94 Page IA.4 Page IA.4 Page IA.7 Page IA.7

{ 310 3256 310 3256 460 4112 460 4112

6

PLUG AT BOTTOH

QUANTITIES FOR BOTH TRACTION DRIVES LISTED. RIGHT HAND DRIVE PARTS ILLUSTRATED.

DESCRIPTION QTY.

Sprocket 2 Capscrew, H20-2.5x80I7o 48 Plalnwasher, H2O 48 Capscrew, H20-2.5 x 110 48 Capscrew. H20-2.5 x 90 48 Plalnwasher. H2O 48 Traction Drlv. Ass'y 2 Valve. Count.rbalance 2 Capscrew. HI2x40 Sock Hd 16 O-Ring 16

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION DF PART REQUIRED

IU'IKOEHRING ~ CRANES& EXCAVATORS .

TRACTION DRIVE SPROCKET & TRANSMISSION

6() DISCONTINUED PARTI REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PARTISI'

DATE. Revised 7-91

MODELl 6644

PAGE IA.3

BEGIN SERIAL #21106

WHEN ORDERING PARTS, SPECIFY MODEl NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

I~IKOEHRING ..... CRANES & -.: . EXCAVATORS

OATE. Rev i sed I i -88 TRANSMISSION CASE ASS'Y MOOEL 6644E

PAGE lA.4

DISCONTINUED PART' REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

REF.

I 2 3 4 5 6 7 8 9 9A 9B 9C

10 II 12 13 14 IS 16 17 18 19 20 21 22 23

24

25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

48

49

PART NO. Prior Ser. Begin Ser. 21198 exc. 21198 & 21196 21196

U413V8601 U413V8604 (Repl.~ U~11V8601)

209463 206736 208533 208269 208534

206732 206728 I 208530 206721 208525

206727 206733

206759 208535 206760 208536

208531 208528 208532

206723 208526 206722 206726

206724 1 208527 206734

206725 I 208529 206719 208524

: 206729 206730 206720 206735 206731

206739 1 208537 206757

{ 206761 206762 206763 206758

{

206765 206764 206756 206746 206747 206748 206743 206749 206750 206742 206755 206745 206744 206741 206752 206751 206754 206753 206740 206]38 206766 206668 207777 207778 208495 208492

REF.

I 2 3 4

5

6

7 8

u 9

\ 10 II 12 13 14 15 16 17

18

19 20

21 22 23 24 25 26 27

28

BEGIN SERIAL #21106

5

PART NO.

206766

208270 207725 208538

{ 207726 207727 208654

207733

207734 207735 207736 207737 208539 208540

-f 207740 L. 207741

207742 207732

207743 2077'.4

{

208655 208656 1218-65

9

15 12 16

---8-

DESCR IPTI ON

Motor, Complete .. (Includes Items I thru 27)

QTY.

Housing .. I Plate, Port. I Pin........................... .. I O-Ring(Viton) (Repl. 207730) ... I Capscrew, MI2x30......... .... 6 Lockwasher .. 6 Rotary Group Ass'y (Repl. 207731) . I

(Includes Items 7 thru 20) Shaft, Dr i ve .. Ring, Bearing ... Cover, Front ....... Disc ........ Plate, Retaining .................. . Nut ... , ..... Bearing, Roller .................. .. Bearing, Roller .................... I Ring, Retaining. ..... .............. I Seal(Viton) (Repl. 207738) ...... I O-Ring(Viton) (Rep!. 207739)....... I Shim, .10.... ...................... 2 Shim, .30.......................... I Screw, '~6x20....................... 7 Rotary Group Ass'y..... ............ I

(Includes Items 21 thru 27) Cyl inder........................... I Plate, Contro!.... .. .......... I Pin, Central....................... I Piston.. . ........ 7 Collar, Spring..................... I Spring, Cup........................ 4 Ring, "F" .......................... 14 Valve, Relief (Repl. 207763) ....... 2 Kit, Seal (Rep!. 207764). .......... 2 O-Ring (Port) ................. 2

WHEN OROERING PARTS. SPECIFY MOOEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

I~IKOEHRING ~ CRANES& . EXCAVATORS

TRACTION MOTOR PAGE IA.6

DATE. Revised 11-88

MODE~' 6644E


REF. PART NO.

I 2 3 4 5 6 7 8 9

10

" 12 13 14 15 16 17 18 19 20

U430v8321

NSS 90lv4008 90lv4005 90lv4003 90lv4001 90lV4010 90lV4007

NSS /ISS

90 I VIl009 90lV4011

NSS 90lv4004 90lV3622 90lV4002 90lV4012 460 0075 90lv3624 90lV4006

NSS

DESCRIPTION

Valve, Counterbalance ....... 2 (Includes Items I thru 20)

Cover, Long................. I Ring, Rectangular ........... I Screw, Socket Head, Metric .. 4 Spring ..................... . Guide, Spring............... 2 Ring, Back-Up............... I O-Ring...................... I Spool....................... I Hous i ng. . . . . . . . . . . . . . . . . . . . . I O-R i ng ..................... . Ring, Back-Up .............. . Cover, Short ............... . Screw, Socket Head, Metric.. II Ring, Square................ 2 Screw, Bleed ................ 2 Screw, Socket Head, Metric.. 8 O-Ring...................... 2 Plug w/O-Ring............... 2 O-Ring...................... 2 Cover, Flange .............. .

WHEN OROERING PARTS, SPECIFY MOOEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

IIWIKODlRlNG ~ CRAHES& EXCAVATORS

TRACTION MOTOR DATE Revised 1-88

MODEL, 6644E

PAGE IA.7

DISCONTINUED PART! REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

17 18

REF. PART NO.

35909346

I U359C9345 2 1200-188

DESCRIPTION

Double Track Guide Ass'y ..... (Includes Items 1,2)

Guide, Track ................. Capscrew, 3/4C x 2 ...........

QUANTITIES LISTED ARE FOR BOTH CRAWLER FRAMES. R.H. CRAWLER FRAME SHOWN

QTY.

4 24

WHEN ORDERING PARTS. SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART RW;', ,t 0

IIW'I KOEHRiNG .. CRANES& ~ . EXCAVATORS "AT, Issued 3-87

T RAe K G U IDE S M'l(" , 1)644E

~--.-------------------PA.GE IA.8 DISCONTINUEIl PART' Rf.FER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

REF.

2

3

4

5

6

7

8

PART NO.

U359E8282

U359E9017

U359E9223

1200-166 420V5860 340V3125 708A6858 359C8286 316v2306 330V2000 359C8392

359A8862

{ 310V2390 340V2323

2--1 3-'

I I

DESCRIPTION

Turntab Ie ................... . (Prior Ser. #21035)

Turntable ................... . (Ser. #21035 to #21126)

Turntable ................... . (Begin Ser. #21126)

Capscrew, 5/8c x 4-1/2 ...... . Mount, Cab .................. . Locknu t, 5/8C ............... . Hasher ...................... . Cover ....................... . Capscrew, 3/8c x 3/4 ........ . P I a i nwa s he r ................. . Light Cover Ass'y ........... . (Includes Items 7 & 8)

6 6 6 6 I 8 8

Cover ......... " ... . . . . . . . . .. 2 Capscrew, 3/8c x I ........... 8 Locknut, 3/8c ................ 8

~IT U335F1602 Includes Boom ___c& Cyl inder Pin Lock Capscrews

JE Replace Prior Turntables

WHEN ORDERING PARTS, SPECIFY MODel NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

TURNTABLE IIW'I KOEHRING ~ CRANES& EXCAVATORS

DATE. Rev i sed 1-88

MODEL. 6644

PAGE 12.1


REF, PART NO.

{

U359C8159 316v2306 333V2003

2 362V 1217

{

20082007-39 3 330V2201

340V2323 4 20082i17-5 5 20082117-6 6 20082007-39 7 445V2406 8 20082007-66 9 362V023 I

10 364 0014 11 364 0002

DESCRIPTI ON __ 9,~

Can, Grease................. I Capscrew, 3/8c x 3/4........ 4 Washer... .. . . . .. 4 Elbow. ...... ................ 2 Clamp, Support.... ... .... 3 Flatwasher, 1/2...... .... 3 Locknut, 3/8c............... 3 Hose Assemb Iy (96").......... 1 HoseAssembly(66") .......... I Clamp, Support........ ..... I Ty-Wrap.. . . . .. . ... . . 2 Clamp, Support... ........ I Connec tor. , . . . . . . . . . . . . . . . . I Fi tt ing, Grease............. 1 Fitting, Grease............. 1

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REnUIRED

I"'IKOEHRING ~ CRANES& .. EXCAVATORS

SWING PINION & RING GEAR GREASE PIPING


DATE, Rev i sed 11 -88

MODEL 6644E

PAGE 12.2

Note: To Replace Tank Prior To Ser. #21214, Order Items 6, 29, 30 " Iso.

REF.

2

3 4

5

6

7 8 9

10 II 12

13

14

PART NO. DESCRIPTION _QTY--,_

359E8427 Fuel Piping Ass'y . (Includes Items I thru 22)

U359E8658 Tank, Fuel .... - 316V3344 Capscrew, 3/4C x I .... AR

331V2600 Plainwasher ....... AR U359C8064 Sender, Fuel ....... I

r 420V3884 Cap, Fuel .... I L 420V5593 Strainer .................... Opt. r 310V3385 Capscrew, 3/4C x 2-1/2 ..... 2 I 330V2601 Plainwasher{.312" x 2.0") ... 2

l' 334v2664 Washer, Hardened............ 4

359A8063-001 Shim (.16") ................. AR 359A8063-002 Shim (.20") ................. AR 340V3330 Locknut, 3/4C ............ 2

{ 162V6806 Nipple, Close(Early)........ I 362 5616 Adapter..................... I 12019-90 Bushing..................... I 430V3210 Valve, Ball................. I 362VI874 Elbow....................... I 360VI610 Bushing, Reducer(I-I/2x1/2), I 362V6601 Nipple, Close ..... I 420V5597 Nose, Coupler ........ I 420V5596 Cap, Dus t. . . . . . . . . . . . . . . . . . . I 310V3394 Capscrew, 3/4C x 2 . 2 330V2601 Plainwasher{.812" x 2.0") . 2 334v2664 Washer, Hardened .. 2 359A8063-001 Shim (.16") ................. AR 359A8063-002 Shim (.20") ................. AR 200B2007-008 Clamp, Support ............. . 330V2201 Plainwasher, 1/2 .......... . 340V2323 Locknut. ~/8c ....... ....... .

2 2 2

4

22---~7J

23---~

28-

REF.

15

16

17

18

19

20

21 22 23 24 25

26

27

28 29

30

PART NO.

200B2076-017 I 310V2390

_: 200B2007-006 i 200B2007-008 L 340V2323

.J 31 OV2379 ~. 358A201 0

1- 31 OV2390

-1 200B2007-006 , 200B2007-008 L 340V2323 ~ 31 OV2390

.. ; 358A0378 ~. 340V2323 .r 200B2007-006 c. 316v2336

362V0414 362VI403 12019-484 362V0722 200B2074-017

r- 200B2007-006 . 200B2007-008

330V2201 L 340V2323

.1" 316V2336 :. 200B2007-006

362V0402 1219-873

{ 375 0400 12019-558

DESCRIPTION

Hose Ass'y (5/8 x 138") .... Capscrew, 3/8c x I ......... . Clamp ...................... . Clamp ...................... . Locknut, 3/8C .............. . Capscrew, 3/8c x 1-1/4 ..... . Bracket .................... . Capscrew, 3/SC x I ......... . Clamp ...................... Clamp ...................... . Locknut, 3/8C .............. . Capscrew, 3/8c x 3/4 ..... '" Bracket .................... . Locknut, 3/8C .............. . Clamp ..................... Capscrew, 3/8C x 5/8 ... .... . Connector, Female .......... . Elbow ..................... .. Valve, Check ............... . Connector, Ma Ie ............ . Hose Ass' y 0/8 x 144") .... . CI amp ...................... . Clamp ...................... . Plainwasher, 1/2 ........... . Locknut, 3/8c .............. . Capscrew, 3/8c x 5/8 . ...... . Clamp, Support. ............ . Connector, Male ............ . Plug ............... __ : Disconnect ....... _ ........ . Cap, Dust .........

7 6

QTY .

I I I I 2 I I I I I I I I I 2 2 I 2 2 I I 3 3 3 3 2 2 I I I I


I IrII KOEHRING ~ CRANES& . EXCAVATORS

FUEL TANK & PIPING - DETROIT DIESEL -


DATE. Rev i sed I 1-88

MODEL. 6644E

PAGE 12.3 Sheet I of 3

5

14---~r7

17

Note: To Replace Tank Prior To Ser. #21214, Order Items 6, 29, 30 A I so.

REF.

2

3

4

5

6

7 8 9

10 I I

PART NO. DESCRIPTION QTY.

359E8968 Fue I Pip i ng Ass' y .......... . (Includes Items I thru 22)

U359E8658 Tank, Fuel .................. I

{. 316v3344 Capscrew, 3/4C x I .......... AR

.. 331V2600 Plainwasher ................. AR U359C8064 Sender, Fuel ................ I r 420V3884 Cap, Fue 1. . . . . . . . . . . . . . . . . . . I

. 420V5593 Strainer .................... Opt. r' 310V3385 Capscrew, 3/4C x 2-1/2...... 2 j 330V2601 Plainwasher(.812" x 2.0") ... 2 334v2664 Washer, Hardened ............ 4

"

359A8063-001 Sh im (.16") ................. AR 359A8063-002 Sh i m (.2010 ) AR

. 340V3330 Locknut, 3/4C............... 2

{

362V6806 Nipple, Close(Early)........ I 362 5616 Adapter..................... I 12019-90 Bushing.... . .......... I 430V3210 Valve, BaiL................ I 362VI874 Elbow ....................... I 360VI610 Bushing, Reducer(I-1/2xI/2). 362V6601 Nipple, Close .............. . 420V5597 Nose, Coupler .............. .

REF.

12

13

14 15 16 17 18 19

20

21

22

23

24

2

4

PART NO.

420V5596 ,. 310V3394

l 330V2601 334v2664 359A8063-001 . 359A8063-002 362VI609 200B2076-020 20082075-020 20082007-007 20082007-008 200B2007-058

f 358A20l0

- 310V2390 - 340V2323

{

. 358A0378 - 316v3130

- 332V2400 --f" 330V220 I L 340V2323

1219-873

{ 375 0400 12019-558

6

9 10

Prior Ser. #21214

DESCRIPTION

Cap, Dus t .................. .

5

Capscrew, 3/4C x 2 .......... 2 P I a i nwa s he r ( . 8 I 2" x 2. 0") . .. 2 Washer, Hardened ............ 2 Shim (.16") ................. AR Sh i m (.20")................. AR Elbow....................... I Hose Ass'y (5/8 x 174")..... I Hose Ass'y (1/2 x 180")..... I C I amp. " .......... _ . . . . . . . .. 7 Clamp....................... 7 Clamp. . . . . . . . . . . . . . . . . . . . . .. 2 Bracket. . . . . . . . . . . . . . . . . . . . . I Capscrew, 3/8c x I .......... 4 Locknut, 3/4c ... ............ 4 CI ip. . .. .. .... .. . . . . . . . . . . .. 2 Capscrew, 5/8C x I.......... I Lockwasher. . . . . . . . . . . . . . . . . . I P I a i nwa s he r. . . . . . . . . . . . . . . .. 5 Locknut, 3/8C ............... 5 PI ug ......... D i sconnec t ............ Cap, Dust .................


IIWIKOEHRING ~ CRANES& EXCAVATORS

FUEL TANK & PIPING - CUMMINS -

DISCONTlNU~D PART! REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

DATE Rev i sed J 1-88

MODEL, 6644E

PAGE 12.3 Sheet 2 of 3

21

Note: To Replace Tank Prior To Ser. #21214, Order Items 6, 29,30 A Iso.

23

14---"" 15---~

16-

REF. PART NO. DESCRIPTION ____ QTY. REF.

2

3 4

5

6

7 8 9

10 II 12

13

359E9061 Fuel Piping Ass'y .... (I nc 1 udes I terns 1 thru 22)

U359E8658 Tank, Fuel .... 1 f 316V3344 Capscrew, 3/4C xl. .... AR

-L 331V2600 Plainwasher ....... AR U359C8064 Sender, Fuel ........ 1

[ 420V3884 Cap, Fuel................... 1

- 420V5593 Strainer ........ Opt. r 310V3385 Capscrew, 3/4C x 2-1/2...... 2 i 330V2601 Plainwasher(.312" x 2.0")... 2

l 334v2664 Washer, Hardened............ 4 I 359A8063-001 Shim (: 16") ......... AR L 359A8063-002 Shim (.20") ........ AR

340V3330 Locknut, 3/4c ..... 2

{

362V6806 Nipple, Close(Early) ..... 3625616 Adapter .................. 12019-90 Bushing .............. 430V3210 Valve, Ball. ........ 362VI874 Elbow ................... 360Vl610 Bushing, Reducer(I-1/2xI/2). 362V6601 Nipple, Close ........... 420V5597 Nose, Coupler ........... 420V5596 Cap, Dust ..............

;- 310V3394 Capscrew, 3/4C x 2.......... 2 330V2601 Plainwasher(.812" x 2.0") . 2 334V2664 Washer, Hardened............ 2 359A8063-001 Shim (.16") ........... AR

L 359A8063-002 Shim (.20") .......... AR

14 15 16 17 18 19 20 21

22

23

24

25 26 27 28

29

30

31

4

PART NO.

Prior Ser. #21214

DESCRIPTION

362VI403 Elbow ..................... . 12019-484 Valve, Check .............. . 362V0402 Connector, Male ........... . 200B2076-019 Hose Ass'y(5/8 x 138") .... . 200B2074-1 Hose Ass' y (3/8 x 168") .... . 708 8047 Hose Ass' y (3/8 x 28") ..... . 200B2007-006 Clamp ..................... . 20082007-008 C I amp ..................... .

r 358A20 I 0 8 racket. .................. . - 310V2390 Capscrew, 3/8C x I ........ . L 340V2323 Locknut, 3/8c .... ......... . r 708 6610 Base, Filter .............. .

203687 Filter, Spin-On ........... . 310V2379 Capscrew, 3/8c x 1-1/4 .... . 340V2323 Locknut, 3/8c ............. . 362V0722 Connector ................. . 1240-100 Clamp ..................... . 1219-799 Elbow ..................... . 1200-372 Capscrew, Ml0-1.5 x 20 .... .

r 330V2201 Plainwasher ............... . -L 340V2323 Locknu t, 3/8c ............. .

1219-873 Plug ...............

{ 375 0400 Disconnect ............ 12019-558 Cap, Dust ................

WHEN ORDERING PARTS, SPECIFY MODEl NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOIlIRED

'I J

6

5

QTY.

2 2 1 1 1 1 7 7 1 1 1 1 1 2 2 1 1 1 1 5 5 I

1"1 KOEHRING FUEL TANK & PIPING - ISUZU- OAT[ Rev i sed 11-88 ---'--_IrA MODEL 6644E ~ CRANES& EXCAVATORS PAGE 123

DISCONTINUED PARTI REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S) Sheet 3 of 3

REF.

2 3 4 5 6 7 8

PART NO.

Prior To Begin W/ Ser.#21035 Ser.#21035

* 359E8385 * 359E8520

359E9010 359E9011

340V4116 340v4116 * 200B0079-034 200B0079-034

334v3401 334v3401 * 310v4150 310v4150

354v3602 !354V3602 * 200B0028-013 359B9019 * 303V3500 303V3500

* Consult Factory

DESCR I PTI ON

Counterweight (Excavator) ... . Counterweight. .............. .

(Logger & Kane Loader) Nut, Lock ................... . Washer, Flat ............... .. Washer, Ha rdened ............ . Capscrew .................... . Pin, Cotter, 1/2 x 3-1/2) ... . Pi n ................... , ..... . Bolt, Eye ................... .

QTY.

2 2 2 2 4 2 2

WHEN OROERING PARTS. SPECIFY MODEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

1"-' KOEHRING ~ CRANES& EXCAVATORS

DATE Revised 10-85

COUNTERWEIGHT ASSEMBLY MODEL. 6644E

PAGE 13.1


, '\

3

~' REF. PART NO.

Prior To 8egin W/ Ser.#21035 Ser.#21035

359A8327 359A8327 2 411V3813 411 V381 3 3 330V3700 330V3700

. V/'//TOFRONTOF

//. MACHINE

" " , "

0\

FROM COUNTERWEIGHT

9---:

OESCR I PTf ON

Pendant (480" Lg) ......... Sheave ................. Washer .......... " ... , ...

QTY.

1 4 8

4 20080024-0 I I 20080024-0 I I Pin (1-1/2" x 5-5/16") ... 4 354v2404 254v2404 Pin, Cotter (5/16x2-1/2). 8

5 20080078-076 330V4000 Washer, Flat ........ , ... 2 6 340v4513 340V4909 Nut, Lock ............... 2

7 359A8328 359A8328 Pi n ........... 2 354V2010 354V2010 Pin, Cotter (1/4x2-1/4) .. 4

8 U35584043 U35989020 Eyebolt .................. 2 9 340V3911 340V3911 Nut, Lock ................ 2

10 310V3908 310V3908 Capscrew ................. 2

WHEN ORDERING PARTS, SPECIFY MODel NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

STORAGE BOLT &

NUT

1"'1 KOEHRiNG DATE Revised 10-85 .... CRANES& '1 EXCAVATORS ,---- --- --' --- .--.. _-- ----- ._-- ---

COUNTERWEIGHT REMOVAL ASSEMBLY

OISCONnr~Uf 0 PAHl' REFER fO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

----MODEL. 6644E PAGE 13.2

SPIN-ON FILTERS Fuel Strainer Fue I Fi Iter Oil Filter

REF. PART NO.

U420VI815

2 .~ U359D8416 '. U359D8417

3

4 5

6

7

8

9 10

II

12

.r 316v3108 _332V2400

420V5855 200B0077-50

i310V3375 1 332V2600

U359C8048 \ 310V3399 , 332V2600

420V5843 200B0077-49

, 316V3113 ~ 340V3125

.. U359B8402 U359B3796

PART NO. 203687 202648 203690

____ D_ESCR I PTI ~N, ._ ...... _ . Q!..~:_

Engine, D.D ............. (6v-71 7063-7600) Support, L.H (Shown) ..... I Support, R.H ........... " I Capscrew, 5/8C x 2-3/4 ... 8 Lockwasher ............... 8 Mount, Rubber ............ 4 Flatwasher ............... 4 Capscrew, 3/4C x 4 ....... 2 Lockwasher ............... 2 Support. . . . . . . . . . . . . . . . .. I Capscrew, 3/4c x 1-3/4 ... 2 Lockwasher ............... 2 Mount, Rubber ............ 2 Flatwasher ............... 4 Capscrew, 5/8C x 4 ....... 2 Locknut, 5/8C ............ 2 Support (w/o Compressor). 2 Support (w/Compressor) ... 2

19 (18 15 ~bJ

L----------'! .... (-t-i .... ~14

12

2

3

_R_E_F_._P_A_R_T_NO_. _______ D_E_SCR I PT I ON QTY.

13 j'310V3 185 l332V2400

_[. 359C840 I III'

U359C8803 I' 31 OV2525

15 .\ 334v2300 i. 340V2507

{435V3208

16 200B0087-004

f200B2007-014 17 -, 31 OV2390

c340V2323 18 359A8405 r 31 OV2525 19 l' 334V2300

.. 340V2507 20 420 5665

Capscrew, 5/8c x 1-1/2 ... 8 Loc kwa s he r . . . . . . . . . . . . .. 8 Strip (w/o Compressor) ... I

(Shown) Support (w/Compressor) ... I Capscrew 7/16Cxl-1/4 ..... 4 Lockwasher ..... " ........ 4 Locknut, 7/16c ...... ..... 4 Hose 1-1/4 ID x 60 ....... 2 C I amp .................... 2 C I amp .................... 2 Capscrew, 3/8C x I ....... I Locknut, 3/5C............ I Strip, Air Cleaner ....... 2 Capscrew, 7/16C x 1-1/4 .. 4 Lockwasher ............... 4 Nut, 7/16C ............. " 4 Heater, Block ........... Opt.

WHEN ORDERING PARTS. SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

ENGINE DETROIT DIESEL 6V-71 SAT

11171 KOEHRiNG ~ CRAHES& EXCAVATORS

DA rE' il,ev i sed 1-38

MOD'L, 6644E

_._------------------,--'-------------------------------1 PAGE 14. I DISCONTINUED PARTI REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

REF. PART NO.

{

U355B57S5(CF) 1 316v2336

333V2003 2 355E6000 3 310V3397

{

35SB0416(CF) 316v2336

4 333V2003 5 331V2400 6 355E6115 7 420V5S43 S 200B0076-035 9 340V3125

DESCRIPTION

Angle ................ . Capscrew ............ . (3/S" NC x 5/S" - Gr. 5) Washer, Bellville ....... . Radiator ............. . Capscrew ............ . (3/4" NC x 1 3/4" - Gr. 5) Angle ................ . Capscrew ............ . (3/S" NC x 5/S" - Gr. 5) Washer, Bellville ....... . Washer (.656" x 1.312") .. Cooler, Oil ............ . Mount, Rubber ........ . Washer, Flat .......... . Nut, Lock ............. .

QTY.

2 S

B 1 4

2 S

S 2 1 4 6 4

(5/S" NC - Gr. A)

{

U359DS45S(CF) Shroud................ 1 10 316V2336 Capscrew ............. S

(3/S" NC x 5/S" - Gr. 5) 331V2000 Washer(.406"x.B12") ... S

{

359CB457(CF) Grille................. 1 11 316V2336 Capscrew ............. 16

(3/S" NC x 5/S" - Gr. 5) 333V2003 Washer, Bellville........ 16

19 20

REF.

12

13 14 15 16

17 lS 19 20

21

22 23 24

PART NO.

U464V1104(CF)

421V1255 340V3201 306V2039 310V3148

U361 B2262(CF) 900V4306

U359ES420(CF) 359D7S64(CF) 359D7S60(CF) 359D7S61 (CF) 316V2336

310V2390

333V2003 340V2323

340V3101 200 B0076003 420V5S04

21

DESCRIPTION

Foam Rubber ......... .

End, Rod ............. . Nut, Jam (5/S" NC) ..... . Stud, Cont. Thread ..... . Capscrew ............ . (5/B" NC x 1 3/4" - Gr. 5) Brace ................ . Cap, Radiator ......... . Shroud ............... . Plate,Oriface ......... . Guard, L.H ............ . Guard, R.H ............ . Capscrew ............ . (3/S" NC x 5/S" - Gr. 5) Capscrew ............ . (3/S" NC x 1" - Gr. 5) Washer, Bellville ....... . Nut, Lock ............. . (3/S" NC - Gr. A) Nut, Jam (5/S" NC - Gr. 2) . Washer, Flat .......... . Mount, Rubber ........ .

WHEN ORDERING PARTS. SPECIFY MODEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

'''IKOEHRING ~ CRANES& , EXCAVATqRS DATE Issued: 2-85

MODEL 6644E RADIATOR & OIL COOLER PAGE 14_2


QTY.

160" Lg

6 4 2 6

2 1 1 1 1 1 6

2

2 2

4 4 2

16

11

18

10-__ -....1

17

WITHOUT PRECLEAN ER'::::-~" WITH PRECLEANER

RE F . PART NO.

2

4 5 6 7

8

378vI500 435VI429

{ 359B8418 359C8815 378vI500 435VI428 365VI598 420V3891

~420V3571 (cF) 310V2525 340V2507

AIR CLEANER ASSEMBLY

DESCRIPTION

Clamp (5-1/2") ............. . E I bow, Hose ................ . Tube (w/o Air Compressor) .. . Tube (w/Air Compressor) .... . Clamp (5-1/2") ............. . Reducer, Hose .............. . C I amp (7- I /2") ............. . I nd i ca to r .................. . Band ....................... . Capscrew, 7/16c x 1-1/4 .... . Locknut,7/16c ............. .

QTY.

2

2 4 4

REF. PART NO.

9

10 II 12 13 14 15 16 17

18

420V3875(CF)

410V6095(CF) 420V5598 (CF) 900V7645(CF) 90lVI243 901V1244(CF) 900V3232 901V1245(CF) 420V3688

_.[420V3789 420V3788

DESCRIPTION _. __ ..... _._ ... g~_

Cleaner, Air .............. .. (Inc]. Items 12 thru 16) Extens i on .................. . Cap ........................ . Clamp Assembly ............. . E I emen t As semb I y ........... . Baffle Assembly ............ . 0- Ring ..................... . Cup Assembly ............... . Extension, Pre-Cleaner ..... . Cap, Pre-Screen ............ . Pre-Cleanpr ............... .

WHEN ORDERING PARTS. SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

I", IKOEHRING ~ CRAHES& EXCAVATORS

AIR FILTER INSTALLATION

DATE' Rev i sed 1-88

MODEL 6644E

PAGE 14.3


ITEM 4: FOR SERVICE ORDER 200B2198004 UBOLT CLAMP

1~

16

8 13

REF. PART NO.

420V5535

i 20062282-018

2 420V3790

420V3914 3 20060093-013 4 20062198-004 5 374v8300 6 20062281-006 7 358c5737 8 378vl501

355c5020-001 9 -.{ 31 OV2525

340V2507 10 420V6302 11 359C8060 12 U359C8059 13 35968407 14 35968408 15 316V2336 16 --{ 359A8406

316v2336

DESCRIPTION

Cap, Exhaust ............... . Elbow, Exhaust ............. .

(wiD Air Pre-Cleaner) Pipe, Exhaust. ............. .

(w/Air Pre-Cleaner) Clam[l ...................... . Tube ....................... . Clamp ...................... . Joint, Flex ................ . El bow ...................... . Adapter .................... . Clamp ...................... . 6and ....................... . Capscrew, 7/l6C x 1-1/4 .... . Nut, Lock, 7/16C ........... . Muffler .................... . Cover, End ................ .. Shield, Heat ............... . St rip ...................... . Str i p ...................... . Capscrew, 3/8C x 5/8 ....... . St rip ...................... . Capscrew, 3/8C x 5/8 ... .... .

QTY.

2 4 4 1 1 1 1 2

3 1 2

10

9


IIWI KOEHRING ~ CRAMESa EXCAVATORS

EXHAUST PIPING & MUFFLER PAGE 14.4

DATE Revised 12-85

MODEL, 6644E


15

2

REF. PART NO. DESCRIPTION

1 20082170001 Hose (21/4" x 3") ....... 2 20080087-005 Clamp ................ 3 355C5440 Tube .................. 4 20082315-010 Hose (21/4" x 181/2") ... 5 20082170-137 Hose (2 3/4" x 7") ....... 6 373V1502 Insert,8eaded ......... -[ 435V2276 Hose .................

7 20080087-020 Clamp ................ 8 373V1501 Elbow,8eaded ......... 9 360V4316 Nipple (1/2" Close) ......

10 360V3301 Elbow(1/2"x900) ....... 11 360v4303 Nipple (1/2" x 2") ........

, ~ REF: (RADIATOR U355E60001

'~'~ "

TUBE I.J-l--.

"

REF. PART NO.

23 3111.----f-I"11

V ..... 8----

5------DESCRIPTION

{

356B03S5 Engine, 6644 & 6644L ... (LTA-10-C290/CBS-2646, 2S0 HP - Repl. U420VISIS)

I 356B03S6 Engine, 6655L ........ (LTA-IO-C325/CBS-2647, 315 HP - Rep\. U420V1819)

QTY.

2 {U359DS942 Support, LH (Shown)..... I U359D8946 Support, RH .... 1

3 U359DS948 Support, Front . I 4 359BS949 Plate ........ I

{

310V3148 Capserew, 5/8c x 2 2 5 340v3125 Loeknut, 5/8c 2

334v2402 Flatwasher . 4

{

316V3113 Capserew, 5/Sc x 4 2 6 340V3125 Loeknut .... 2

334V2402 Flatwasher .... 2 7 420V5843 Mount................... 2 S 359A7496 Spaeer.................. 2 9 200B0077-049 Washer ............ 4

22

REF. PART NO.

II 420V5855 12 200B0077-050

-"j 3 "{~~~~~;~r' 14 {310V3197

332V2400 IS {310V3185

332V2400 16 U359B8402 17 359C8401 18 200B0087-003 19 435 3107 20 378 1505 21 {316V2336

340V2323 22 359AI989

{1200-79

23 332V2000

{

20859 1 24 203709

210757 25 202665 26 203206 27 359AS927

{310V2525

28 334V2300 340V2507

29 420 5665 30 209987

DESCR I PTI ON QTY.

Mount.... . .. . . . . 4 Washer ......... tockwasher, 3/4: ... Capserew, 3/4c x 4 ... Capserew 5/SC x 3-1/2 , Loekwasher , ..... Capserew, 5/SC x 1-1/2 . Loekwasher .... Support . ,., .. Str Ip ..... Clamp ...... Hose , t It It'" Clamp ...... Capserew, 3/Sc x 5/S .. Loeknut, 3/SC . Braeket ..... Capserew,3/8Cx3-1/2 GrS. Loekwasher .....

[011 Filter, Full Flow .. . 011 Filter, By-Pass ... ..

[011 Filter, Single .... ..

4 2 2 6 6 S S 2 I I I 2 I I I 6 6 I I I

Fuel Filter w/drain I Fuel Filter w/o drain I Braeket, Air Cleaner 2 Capserew, 7/16C x 1-1/4.. 4 Lockwasher . ~ Locknut, 7/16c .......... 4 Heater, Bloek I Belt, Fan(Flat Ribbed) .. !

{310V3399 Capserew, 3/4c x 1-3/4 2

10 332V2600 Loekwasher ..... 2 " WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

IIW'I KOEHRING ~ CRANES&

EXCAVATORS . ENGINE

CUMMINS LTA-lO-C290 DISCONTINUED PART! REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PARTIS)

~D_A_T_&. __ R~e~v~ls~e~d~7~-~9~1 ____ ~~ I , MOD&I,. &1I44E ~

PAGE" 14A.I

REF PART NO. DESCRIPTION QTY. REF PART NO. OESCRI PTI ON QTY.

I 355E6000 Radiator ................ I 13 421VI255 End, Rod 6 2 310V3197 Capscrew 4 14 {340V320 I Nut, Jam (5/S"NF) 4

(5/8"NC x 3 112" - Gr 5) 332V2400 Lockwasher, SiS" 4 3 35880416 Angle 2 15 306v2039 Stud, Cont Thread 2

4 i316V2336 Capscrew ................ 8 16 310V31S1 Capcsrew 6 (J/8"NC x 5/8" - Gr 5) (5/8"NC x I 314 - Gr 5)

333V2003 Washer, Bellville ....... 8 17 U361B2262 Brace . , . 2 5 331V2400 Washer (.656XI.312") 2 18 900v4306 Cap, Radiator I 6 355E6115 Cooler, 011 ............. I 19 U35908939 Shroud I 7 420V5843 Mount, Rubber ........... 4 {3S907860 Guard, L.H. ............ I S 20080076-03S Washer, Flat ............ 6 20 U3S9C9073 Guard, R.H. .......... ,. I 9 340V3125 Nut, Lock 4 {"'V2'"

Capscrew 6 (S/S"NC - Gr A) (3/8" NC x S/S"-Gr 5)

{U"""" Shroud I 21 310 2390 Capscrew 2 316v2336 Capscrew 8 (3/8" NC x I - Gr 5) 10 (3/S"NC x SIS" - Gr S) 333V2003 Lockwasher 6 331V2003 Washer, Bellville ....... S (3/S" Belleville)

{"90S"l Grille I 22 340V3101 Nut, Jam(S/S"NC-Gr 2) 4 II 316V2336 Capscrew ................ 16 23 20080076-003 Washer, Flat ............ 4 (3/8"NC X SIS" - Gr 5) 24 420'vSS04 Moun t, Rubbe r 2

333V2003 Washer, Bellville ....... 16 12 U464V I II" Foam Rubber 160"

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED . JGROUP

11'7'1 KOEHRING ~ CUNES&

EXCAVATORS . RADIATOR & OIL COOtER

DISCONTINUED PART! REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PARTIS)

~...:...:...:..:---- .. DATE: Revised 7-91 D MOOE~ 6644E

PAGE PIA.2

9

i9 20


REF. PART NO.

I 435VI420 2 378vI505 3 200B2398-026 3A 365VI598 4 435vI506 5 365vI596 6 200B2398-016 7 435vI411 8 420v3615 9 378vI504

10 U359B9072 II 420V3856

I 420V3571 12 _1310V2525

340V2507

13 420v3899

14 410V6095 15 420v5598 16 900v7645 17 -[206411

206410 18 90lVI244 19 900V3232 20 90lVI245

15

14--_--.1

11

DESCRIPTION QTY.

Elbow................... I Clamp................... I Tube.................... I Clamp................... I Hump Reducer .......... I Clamp................... 4 Tube.................... I Elbow................... I Reduce r, Hump .......... . Clamp .............. Tube ............... Indicator ............. Band ......... Capscrew ............

I I I I 2 4

(71161O NC x I 1/4" - Gr 5) Nut, Lock ......... 4 (]/16" NC - Gr A) Cleaner, Air ..........

(lncl. I terns 16 thru 20) Extens ion .......... Cap .......... Clamp Assembly ..... EI ement .......... Element, Safety ....... Baffle Assembly: .... O-Ring .......... Cup Assembly ......

.. ,;, " '~',t!. ~

ITEM 4: FOR SERVICE ORDER 20082198004 U80LT CLAMP

5


I 420V5509 Cap, Exhaust ........... I 2 200B2282-071 Elbow, Exhaust ........ I 3 200B0093-097 Tube 4 00 x 24.5........ I 4 200B2198-003 Clamp ....... 5 5 420v6310 Joint, Flex............. I 6 200B2281-005 Elbow................... 1 7 {208826 Adapter, 90 ...... I

208921 Clamp, V-Band ...... I

{

355C5020-001 Band.................... 2 310V2525 Capserew ........ 4

9 (7/16NC x 1 1/4" - Gr. 5) 340V2507 Nut, Lock............... 4

(7116"NC - Gr A) 10 420v6309 Muffler ............. I 11 359C8060 Cover, End ............ I 12 U359C8059 Shield, Heat............ I 13 359B8407 Strip ................... I 14 359B8408 Strip ................ 2

{

333V2003 Washer, Belleville ..... 3 IS 200B0076-35 Washer, .10 Ga.......... 3

334V2300 Washer ....... 6


I go" I KOEHRING ~ CRANES&

EXCAVATORS . EXHAUST PIPING & MUFFLER

DISCONTINUED PART! REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(SI

DATE, Revised 7-91 MODEL, 6644E

PAGE 14A.4

15

~8 Q---9 ~15

10"""'" IIEI\TFR

a 14

11

I I

II

, __________ REF: (RADIATOR U355E6000)

TUBE L.J..J--~---- INSTALLATION

FURNISHED WITH RADIATOR

~ FROM HEATER OUTLET

~'" ~ ~~ 14 ~ 15

9

REF PART NO. DESCRIPTION QTY.

359C8937 Tube. . . . . . . . . . . . . . . . . . . . 1 2 300B0087-005 Clamp ................... 8 3 359B7530 Adapter. . . . . .. . . . . . . . . . . 1 4 200B2170-005 Hose(2-1/4 x 4)......... 3 5 200B2170-065 Hose(2-3/4 x 7) ......... I 6 362V0404 Connector ............... I 7 I 200B2320-009 Hose (5/1 6) .............. 28"

'445V2406 Strap................... I B . 360V3314 Elbow(I/2 x 45)........ I 9 360v4316 Nipple(I/2"Cbse) ....... 4

10 360V3301 Elbow(I/2" x 90)....... 2 I I 362V0467 Connector, Male. ........ I 12 200B2170-125 Hose(2-3/4 x 4) ......... I 13 200B0087-006 Clamp ................... 2 14 375V0800 Insert, Beaded.......... 2 15 430V3144 Valve................... 2 16 35908930 Tube ......... ,. .. .. .. .. . I

P58A2010 Bracket................. I 17 i 700B2007-006 Clamp .................. .

l310V2390 Capscrew, 3/8C x I ..... .

'n!, 'i ':FU' j' ',\' "1\:: i,' "1'1 ell, 1jlOrH l !\IUr!IHER. SERIAL rWIVlBER AND DESCRIPTION OF PARr HfU'"jHHl

l!. Issued 5,,35

"'''0': 6644E I~IKOEHRING aa.. CRANES& . EXCAYATqRS

RADIATOR PIPING PI\Gf 14A.5

REF. PART two DESCRIPTION QTY. REF. PART NO. DESCRIPTION QTY.

U420V1817 Engine, ISUZU 6RBIT ..... 1 10 -[ 310V3164 Capscrew, 5/8C x 1 1/4 .. 3

2 { U359D8529 Support , LH (Shown) .... 1 332V2400 Lockwashe r ........... 8

U359D8530 Support , RH ............. 1 11 U359C8860 Support ............... 3 U359C8570 Support , Front l.H ....... I 12 U359B8874 Support. ............. 4 U359C8571 Support, Front RH ....... 1 13 U359B8872 Support. ............

J3 1OV6351 Capscrew, M14 x 45 ...... 4 ~ It U359C9042 Bracket, Oi I Fi Iter ... lo' .,,'d. 5 . 1200-367 Capscrew ................ 4 15 { 1200-360 Capscrew, HI2-1.3 x 25 . L332V2205 Lockwasher .............. 8 1210-105 Lockwasher, 12mm ....... 4 With Item

6 420V5855 Mount ................... 8 16 -[ 1200-61 Capscrew, 3/8C x 1 1/4 .. 2 18.

7 {200BOO77-050 Washer, Rear ............ 6 340V2323 Locknut, 3/8c .. ........ 2

708 6568 Washer, Front ........... 2 J 310V2525 Capscrew, 7 116C x I 1/4 . 0 8 { 332V2600 Lockwasher,

3/4 . ........ 4 17 . 334V2300 Lockwasher " 0 310V3375 Capscrew, 3/4C x 4 ...... 4 L 340V2507 Locknut, 7/16C ........ .. 0

r'ov"" Capscrew, M 16 x 40 ... AR 18 U359B9080 Pan, Oi I (Cast) ......... I

332V2301 Lockwasher, 1116 ..... AR 19 208208 Relay, SafetY(Part of Eng.) I 9 1200-144 Capscrew, 5/8C x I -1/2. , 8 (Also 207351 ,Ref:A208204) 1210-32 Loc kwasher, 5/8 .. " ... 8 20 206491 Blade, Fan(Part of Eng.) 1

21 206577 F i Iter, Remote Oil ...... Early 22 206578 F i Iter, Hain Oi 1. ....... I

{ 206579 F i Iter, Fuel (Cartr idge). Ear I y 23

203687 F i Iter, Fue I (Spin-On) ... 24 A208762 Ki t, Sea I (Fuel F i Iter) .

(Centrifugal.Wash T~pe)

WHEN ORDERING PARTS. SPECIFY MODEl NUMBER, SERIAL NUMBER AND OESCRIPTION OF PART REOUIRED

1"'1 KOEHRING ~ CRANES& EXCAVATORS

ENGINE ISUZU 6RBI-TPW05


DATE Rev i sed

MODEL

PAGE 14B. I

15 14

13 \

~

REF. PART NO.

1 2

3

4

5 6 7 8 9

10

11

12

359E9063 310V3197

358B0416

{

3 16V2336

333V2003 331V2400 355E6115 420V5843 200B0076-035 340V3125

iU359D8458 316V2336

331V2000

-[

359C8457 316V2336

.333V2003 U464V 11 04

13 17 18

DESCRIPTION QTY.

Radiator................ 1 Capscrew. ... . .. .. .... . 4

(5/8"NC x 3 1/2"-Gr 5) Angle................... 2 Capscrew. . . . . . . . . . . . . . . 8

(3/8"NC x 5/8"-Gr 5) Washer, Be11vi lle....... 8 Washer (. 656x 1. 312").. . 2 Coo 1 e r, 0 i 1. . . . . . . . . . . . . 1 Mount, Rubber .......... 4 Washer, Flat............ 6 Nut, Lock............... 4 (5/8"NC - Gr A) Shroud ................ , 1 Capscrew ..... , . ... . .. . .. 8 (3/8"NC x 5/8"-Gr 5) Washer, Bellvi lle....... 8 Gri 11e.................. 1 Capsc rew. . . . . . . . . . . . . . .. 16 (3/8"NC x 5/8"-Gr 5) Washer, Bellville ....... 16 Foam Rubbe r . . . . . . . .. . ... 160"

19

REF. PART NO.

13

14

15 16

17 18 19

20

21

22 23 24

421V1255

{340V3201 332V2400 306v2039 310V3181

U361B2262 900v4306 U359E8837

_{359D8854 35907861

{

316V2336

.. 310V2390

333V2003 340V2323 340V3101 200B0076-003 420V5804

20,21

DESCRIPTION

End, Rod ............. Nut, Jam (5/8"NF) ...... Lockwasher, 5/8" ....... . Stud, Cont Thread ...... Capscrew ............... . (5/8"NC x 1 3/4-Gr 5) Brace ............... Cap, Radiator ......... .. Shroud ................ Guard, l.H ............ . Guard, R. H. . .......... . Capscrew ............. (3/8"NC x 5/8"-Gr 5) Capscrew ............... (3/8"NC x l"-Gr 5) Washer, Bellville 3/8" .. Nut, 3/8C .............. . Nut, Jam(5/8"NC-Gr2) ... . Washer, Flat ........... . Mount, Rubber ..........

QTY.

6 4 4 2 6

2 I I 1 1 6

4

4 4 4 4 2


lU'I KOEHRING ~ =::-rtRS '

______ -L ______________________________________________ ~

DATE Issued 5-85 m1 f----------'-_____ : MODEL 6644E RADIATOR & OIL COOLER

PAGE 14B.2


3


20

15

o 14-__ ~1

WITHOUT PRECLEANER

REF. PART NO.

420V3673 2 378v0400 3 359C8875 4 420V3624 5 378v0203 6 420V3674 7 406v4952 8 365v1597 9 359B9026

10 1240-47 II 420V3891

{

420V3578 310V2525

12 340V2507

13 420V3900

14 15 16

17 18 19 20

420V3777 420V5523 201795

{206409 90lV2992 201796 201798 201797

DESCRIPTION

Elbow................... I Clamp................... 2 Tube.................... I Hump Reducer ............ I Clamp................... 2 Adapter. . . . . . . . . . . . . . . . . I Sleeve.................. I Clamp................... 2 Sheet. . . . . . . . . . . .. . . . . . . I Clamp................... I Indicator............... I Band ... " . . . . . . . . . . . . . . . 2 Capscrew. . ... ... . .. ... .. 4 (y/16NC X I 1/4-Gr 5) Nut, Lock............... 4 (y/16" NC-Gr A) Cleaner, Ai r ........... . (Inc!. Items 16 thru 20) Extens ion .............. . Cap .................... . C I amp Ass' y ............ . Element. ............... . Element, Safety ........ . Baffle Ass'y ........... . a-Ring ................. . Cup Ass'y .............. .


I r.l1 KOEHRiNG ~ CRANES& EXCAVATORS

AIR FILTER INSTALLATION DATE, Issued 5-85

MODEL 6644E

.. _______ .. __ ... ____ . ....L ___________________________ --I PAGE 14B.3 OISCIJNTlNUU) PAR1' REFER 10 NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

ITEM 4: FOR SERVICE ORDER 200B2198004 UBOLT CLAMP

'~

7

REF.

1 2

3 4 5 6

7

9

10 11 12 14 15

16

17

18

PART NO.

420V5535 200B2282-018 359B8886 200B2198-004 374v8300 200B2281-006

{359C8851 378v0306

{

355C5020-001 310V2525

340V2507 l.

420V4391 359C8060 U359C8878 359C8861 316V2336

{

359A8406 316v2336

359A8858

{

3 10V2390

333V2003 340V2323

DESCRIPTION

Cap, Exhaust 5" ......... Elbow, Exhaust ......... Tube .................. Clamp ............... Joint, Flex ............ . El bow ............... Adapter ............. Clamp ................ Band .... , ........... Capsc rew ............ (Y/16NC x 1 1/4-Gr 5) Nut, Lock ............. (Y/16"NC-Gr A) Muffler ................ . Cover, End ............ .. Shield, Heat ........... . Sheet ................. Capscrew ............... (J/8NC x 5/8) St rip ........... , ...... . Capscrew ............... . (J/8NC x 5/8) Str i p .................. . Capscrew ............... (J/8NC xl) Washer, Be llv i lie ...... . Nut, 3/8e .............. .

~_., 17

~18

14

QTY.

1 1 1 6 1 1 1 1 2 4

4

1 1 1 2

3

2

2 2

15


'U"IKOEHRING ~~~

----'-

EXHAUST PIPING & MUFFLER


DATe Issued 5-85

MODrL. 6644E

PAGE 14B.4

4

2

REF. PART NO.

359C8853 2 200B0087-005 3 359B7530 4 200B2170-005 5 200B2170-181 6 359C8852 7 375V0800 8 430v3144 9 360v4316

10 360V3301 I I 200B0087-006 12 200B2170-125

f353A2010 13 ~ 200B2007-006

L 31 OV2390

DESCRIPTION QTY.

Tube. . .. .. . . .. . .. .. . . . .. I Clamp................... 8 Adapter ................ . Hose(2-1/4 x 4) ......... 2 Hose(2-3/8 x 4) ......... I Tube. . .. .. ..... . ..... . . . I Insert, Beaded.......... I Valve................... I Nipple(I/2" Close) ...... 2 Elbow(I/2" x 90) ....... I C I amp. . . . . . . . . . . . . . . . . .. 2 Hose(2-3/4 x 4) ......... I Bracket. . . . . .. . . . . . . . . . . I Clamp................... I Capscrew, 3/8c x I ...... I

ruBE INSTALLATION FURNISHED WITH RADIATOR


1"'1 KOEHRiNG a.. ~::ttRS RADIATOR PIPING ----------------'-_._--_._---_._-------------

DISCONm~UE D PART! REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

DATE Issued 5-85 6644E ---.. MODEL:

PAGE IlIB.5

PILOT BEARING

BOLTEO TO ENGINE FLYWHEEL

8

\ ~~ '~

'~ ;>

REF. PART NO.

6

U421V3361 (CF)

1 900V6358 2 900V6359 3 N/S 4 N/S 5 N/S 6 N/S 7 901V0635 8 334V2001 9 316V2328

DESCRIPTION

Power Take-Off ......... (Inc. Items 1 Thru 6) Nut ................... Lockwasher ........... Spacer ................ Ring, Driving ........... Spider ................ Block, Rubber .......... Key ................... Washer, Hardened ...... Capscrew .............

ITEM 1

QTY.

1 1 1 1 1

20 1 8 8

SEAT HUB OF SPIOER BY TOR-QUING NUT TO 30 FT. LBS. THEN TIGHTEN NUT BY TURNING AN ADDITIONAL 120" TO 150'.

WHEN OnOrRING PARTS. SPECifY MODEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

IIWI KOEHRING ~ ~:l,.tRS I POWER TAKEOFF .. _'.__ _ _ ______ -.-1 _______________________________ . _________ _

DA TE Issued: 2-85

MODEl. 6644E

PAGE 15.1

DI:;I:UNTINUf 0 PART' REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

REF.

SERIAL NUMBERS 21001, 21002

21005 Thru 21014 21016, 21017

21023 Thru 21026

PART NO.

U288C2668099

2-[ 300V2278 334V2664

~-( 355A2381 310V3581 334V2804

DESCRIPTION OTY.

Motor, Hydraulic ....... (For Parts See Page 22.2) Bolt, Lock (314" x 2 114 ") .. 4 Washer, Hardened ...... 4 Gasket ................ 1 Capscrew ............. 16 Washer, Hardened , ... , , 16

5

REF. PART NO. DESCRIPTION OTY.

5 U359D7862 Drive Ass'y, Swing ...... (For Parts See Page 22.3)

6 360V4414 Nipple, Pipe (314" x 7") ... 1 7 360V3401 Elbow,900(314") ........ 1 8 360V3411 Elbow,45(314") ........ 2 9 360V0406 Plug, Pipe (314 ") ........ 1

10 360V0417 Plug (314") . , , , , , , , , , , .. 1 11 360VOI09 Plug (114") , , .. " .. " .. , 1


/IIW/ KOEHRING ~ CRAHES& EXCAVATORS

SWING DRIVE & MOTOR INSTALLATION


DATE, Rev i sed 1 -88

MODEL 6644E

PAGE 22.1

SERIAL NUMBERS 21003. 21004

21018 Thru 21021 21027 & UP

REF. PART NO.

U288C2668099

2-[ 300V2278 334V2664

3 355A2381

4-L 310V3540 334V2804

r 9

ctS \ 7

8

DESCRIPTION

Motor, Hydraulic ....... (For Parts See Page 22.2) Bolt. Lock (3/4" x 21/4") .. Washer, Hardened ...... Gasket ................ Capscrew ............. Washer, Hardened ......

4

5

OTY. REF. PART NO. DESCRIPTION

5 U359D8924 Drive Ass'y, Swing ...... (For Parts See Page 22.3A)

4 6 360v4427 Nipple, Pipe (3/4" x 8") ... 4 7 360V3407 Elbow. 90 (3/4") ........ 1 8 360v0406 Plug, Pipe (3/4") ........

16 9 360V0417 Plug (3/4 ") ............. 16

WHEN OROERING PARTS, SPECIFY MOOEL NUMBER, SERIAL NUMBER ANO OESCRIPTION OF PART REQUIRED

''''IKOBlRlNG ~ CRANES& EXCAVATORS

--- --.----- --_.--------

SWING DRIVE & MOTOR INSTALLATION

DISCONTINU[O PART' REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S)

OAT E Issued: 3.85

MOO'L 6644E

PAGE 22.1A

OTY.

2 3 4

U288C2668-099 Motor, Swing

901 4089 Ki t, V; ton (Repl. 901 3601).

460 0352 460 0330 901 3602 901 4024 460 0079

(Includes All Parts Marked With An Asterisk *)

*O-R ing . *O-Ring Ring, Reta iner .

*Seal, Viton{Repl.901 3603). I *O-Ring {Tube Fittings) 2

(Included in Kit, Not Shown)

WHEN OROERING PARTS, SPECIFY MOOEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

I D"I KODIRING ~ CRANES& EXCAVATqRS

DATE, Rev i sed 11-88

SWING MOTOR ASSEMBLY MODEL, 6644E PAGE' 22.2


I '*'

r---- ---,

~ i

1 _________ ...1

SERIAL NUMBERS 21001, 21002

21005 Thru 21014 21016, 21017

21023 Thru 21026


,I'W,KOEHRING ..,.. CRANES& EXCAVATORS

DATE, Revised 1-88

VERTICAL SWING DRIVE ASSEMBLY MODEL, 6644E

PAGE 22.3

DISCONTINUED PART! REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S) Sheet 1 of 2


U359D7862 Drive, Swing ........... 1 1 403V8872 Bearing, Roller ......... 1 2 901V3310 Ring, Seal ............. 1 3 901V3313 Plate, Support .......... 1 4 901V3306 Shaft, Output .......... 1 5 901V3321 Ring, Snap ............. 1 6 901V3314 Plate, Support .......... 1 7 901V3308 Nut, Shaft ............. 1 8 403V8873 Bearing, Roller ......... 1 9 901V3309 Seal, Shaft ............ 2

10 901V3307 Shaft, Sun Wheel ....... 1 11 901V3311 Breather .............. 1 12 901V3312 Ring, Seal ............. 1

U901V3318 Brake Assembly ........ 1 (Inc. All Parts listed Below)

13 901V3315 Piston ................ U901V3316 Kit, Seal ...............

(Inc. All Items With *) U901V3317 Kit, Disc ...............

(Inc. All Items With e)

WHEN UIlUf.llli"r. PAil! S. SPI CIFY MOOEl NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REDU/HED

I Pl'1 KOEHRING .. CRANES& ~ . ~CAVATORS I VERTICAL SWING DRIVE ASSEMBLY J _______________________________________ _ OA"- 'ssued: 2-85

MODEL 6644E

PAGE 22.3

~ nhCOIIIWW'1I PAIlI' 11Ft [n 10 NUMUUI;AI PAIlTS LIST FOil REPLACEMENT PARTtS) _________________________ ....L..-________ _ Sheet 2 of 2

SERIAL NUMBERS 21003. 21004

21018 Thru 21021 21027 , UP

I 2

4

WHEN ORDERING PARTS. SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIREO

"~~~----------------r---------------------------------------------~~-----------------W~ IIIW'I KOEHRING ,,, ." I .. , 7-91 ~ ~:lrtRs V E R TIC A L S WIN G D R I V E ASS E M B L Y MODIIL. '~-:~~644E:-

PAGE 22.3A

DISCONTINUED PARTI REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PARTIS) . Sheet 1 of 2!


U359D8924 Drive, Swing ' . 1 1 403V8872 Bearing, Roller 1 2 901V3310 Ring, Seal 1 3 901V3313 Plate, Support . " 1 4 901V3306 Shaft, Output 1 5 901V3321 Rlng,Snap .. 1 6 901V3314 Plate, Support .. 1 7 901V3308 Nut,Shaft .. I 1 8 403V8873 Bearing, Roller : 1 9 901V3309 Seal, Shaft I. II "' 2

10 901V3504 Shaft, Sun Wheel 1 11 901V3311 Breather 1 12 901V3312 Ring, Seal ... 1

901V3505 Brake Assembly .. 1 (Inc. All Parts Listed Below)

13 901V3507 Piston ... 901V3506 Klt,Seal .

(Inc. All Items Wlth*) U901V3317 Kit, Disc ....

I (Inc. All Items With .) 14 901V4098 Planetary 1 15 901V4099 Planetary .... 1


IU"IKOEHRING ~ CRANES& '

EXCAVATORS

DATE. Revised 7-91

VERTICAL SWING DRIVE ASSEMBLY MODEL. 3 6644E ~" " ,

PAGE 22.3A

DISCONTINUED PARTI REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PART(S) Sheet 2 of 2~

3S

29

18

I L. _____ _

Begin Serial t

-----------, r I

, I I I I I I I I

, 16

15

I I I I I I I , I I I

9 I , I I

-----------~ ,

6

WHEN ORDERING PARTS, SPECIFY MOOEl NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

~KOEHRING ~ CRANIS&

IXCAYATORS VERTICAL SWING DRIVE ASSEMBLY

PAGE 22.3B Sheet 1 of 2


413V8609 Swing Drive Ass'y . (Inc1u3es ItEms 1 thru 36)

1

1 210360 Shaft, Output 1 2 206635 Button, Thrust ............ 1 3 210130 Ring, Spacer 1 4 901V3310 Ring, Seal ................ 1 5 403V8872 Bearing, Ro,l1er .. 1 6 210125 Case, Cartridge 1

206736 Plug, Screw, M18 1 7 208534 O-Ring ......... 1 8 210133 Plug, Screw, 3/4 npt 1 9 901V3309 Seal, Shaft ...... 2

10 403V8873 Bearing, Roller . 1 11 9'OlV3308 !tut ...................... 1 12 210129 Planet Carrier Ass'y 1 12A 210132 Ring, Stay ................. 1 13 210126 Shaft, Sun Gear . 1 14 210128 Planet Carrier Ass'y . 1 15 210124 Gear, Twin Ring 1

16 {210135 Bolt, M16 x 100 2 210134 Washer ................... 2 17 210136 Housing, Disk ............. 1 18 210146 Plug, Screw, 3/4 npt 1 19 210144 Bolt, M12 x 45 16

20 -[210148 Dipstick 1 208695 Ring, Seal 1 21 210149 Extension .......... 1

22 {210147 Vent .................... 1 208861 Ring, Seal .............. 1 23 210143 Plug, Cap .................. 1 24 210361 Shaft, Input ....... e' ....... 1 25 208483 Ring, Snap ~ ............... 1 26 210145 Plate, Back-Up ........ 1 27 210139 Seal, Piston .. 1 28 210140 Ring, Back-Up 2 29 901V3507 Piston ........... 1 30 2

koe - minnparfiles.minnpar.com/partbooks/excavator manuals/koehring and bantam...a numerical parts...

Documents