km 7450 user manual
TRANSCRIPT
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 1/254
magicolor 7450User’s Guide
®
4039-9563-02A
1800806-001C
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 2/254
Trademarks
KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered trademarks of
KONICA MINOLTA HOLDINGS, INC.
magicolor is a trademark or registered trademark of KONICA MINOLTA PRINTING SOLU-
TIONS U.S.A., INC.
PageScope is a trademark or registered trademark of KONICA MINOLTA BUSINESS TECH-
NOLOGIES, INC.
All other trademarks and registered trademarks are the property of their respective
owners.
Copyright Notice
Copyright © 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., Marunouchi Center
Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan. All Rights Reserved. This
document may not be copied, in whole or part, nor transferred to any other media or language,
without written permission of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Notice
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. reserves the right to make changes to
this guide and to the equipment described herein without notice. Considerable effort has been
made to ensure that this guide is free of inaccuracies and omissions. However, KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC. makes no warranty of any kind including, but not
limited to, any implied warranties of merchantability and fitness for a particular purpose with
regard to this guide. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. assumes no
responsibility for, or liability for, errors contained in this guide or for incidental, special, or conse-
quential damages arising out of the furnishing of this guide, or the use of this guide in operating
the equipment, or in connection with the performance of the equipment when so operated.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 3/254
SOFTWARE LICENSE AGREEMENT
This package contains the following materials provided by Konica Minolta Business Technolo-
gies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded
machine-readable outline data encoded in the special format and in the encrypted form (“Font
Programs”), other software which runs on a computer system for use in conjunction with the
Printing Software (“Host Software”), and related explanatory written materials (“Documenta-
tion”). The term “Software” shall be used to describe Printing Software, Font Programs and/orHost Software and also include any upgrades, modified versions, additions, and copies of the
Software.
The Software is being licensed to you under the terms of this Agreement.
KMBT grants to you a non-exclusive sublicense to use the Software and Documentation, pro-
vided that you agree to the following:
1. You may use the Printing Software and accompanying Font Programs for imaging to the
licensed output device(s), solely for your own internal business purposes.
2. In addition to the license for Font Programs set forth in Section 1 (“Printing Software”)
above, you may use Roman Font Programs to reproduce weights, styles, and versions of
letters, numerals, characters and symbols (“Typefaces”) on the display or monitor for your
own internal business purposes.
3. You may make one backup copy of the Host Software, provided your backup copy is not
installed or used on any computer. Notwithstanding the above restrictions, you may install
the Host Software on any number of computers solely for use with one or more printing
systems running the Printing Software.
4. You may assign its rights under this Agreement to an assignee of all of Licensee’s right and
interest to such Software and Documentation (“Assignee”) provided you transfer to
Assignee all copies of such Software and Documentation Assignee agrees to be bound by
all of the terms and conditions of this Agreement.
5. You agree not to modify, adapt or translate the Software and Documentation.
6. You agree that you will not attempt to alter, disassemble, decrypt, reverse engineer ordecompile the Software.
7. Title to and ownership of the Software and Documentation and any reproductions thereof
shall remain with KMBT and its Licensor.
8. Trademarks shall be used in accordance with accepted trademark practice, including iden-
tification of the trademark owner’s name. Trademarks can only be used to identify printed
output produced by the Software. Such use of any trademark does not give you any rights
of ownership in that trademark.
9. You may not rent, lease, sublicense, lend or transfer versions or copies of the Software that
the Licensee does not use, or Software contained on any unused media, except as part of
the permanent transfer of all Software and Documentation as described above.10. In no event will KMBT or its licensor be liable to you for any consequential, incidental INDI-
RECT, PUNITIVE or special damages, including any lost profits or lost saving, even if
KMBT has been advised of the possibility of such damages, or for any claim by any third
party. KMBT or its licensor disclaims all warranties with regard to the software, express or
implied, including, without limitation implied warranties of merchantability, fitness for a par-
ticular purpose, title and non-infringement of third party rights. Some states or jurisdictions
do not allow the exclusion or limitation of incidental, consequential or special damages, so
the above limitations may not apply to you.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 4/254
11. Notice to Government End Users: The Software is a “commercial item,” as that term is
defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial
computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consis-
tent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S. Govern-
ment End Users acquire the Software with only those rights set forth herein.
12. You agree that you will not export the Software in any form in violation of any applicable
laws and regulations regarding export control of any countries.
About Adobe Color Profile
ADOBE SYSTEMS INCORPORATED
COLOR PROFILE LICENSE AGREEMENT
NOTICE TO USER: PLEASE READ THIS CONTRACT CAREFULLY. BY USING ALL OR ANY
PORTION OF THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF
THIS SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREE-
MENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS AGREEMENT, DO NOT USETHE SOFTWARE.
1. DEFINITIONS In this Agreement, “Adobe” means Adobe Systems Incorporated, a Dela-
ware corporation, located at 345 Park Avenue, San Jose, California 95110. "Software"
means the software and related items with which this Agreement is provided.
2. LICENSE Subject to the terms of this Agreement, Adobe hereby grants you the worldwide,
non-exclusive, nontransferable, royalty-free license to use, reproduce and publicly display
the Software. Adobe also grants you the rights to distribute the Software only (a) as embed-
ded within digital image files and (b) on a standalone basis. No other distribution of the
Software is allowed; including, without limitation, distribution of the Software when incorpo-
rated into or bundled with any application software. All individual profiles must be refer-
enced by their ICC Profile description string. You may not modify the Software. Adobe is
under no obligation to provide any support under this Agreement, including upgrades or
future versions of the Software or other items. No title to the intellectual property in the Soft-
ware is transferred to you under the terms of this Agreement. You do not acquire any rights
to the Software except as expressly set forth in this Agreement.
3. DISTRIBUTION If you choose to distribute the Software, you do so with the understanding
that you agree to defend, indemnify and hold harmless Adobe against any losses, dam-
ages or costs arising from any claims, lawsuits or other legal actions arising out of such dis-
tribution, including without limitation, your failure to comply with this Section 3. If you
distribute the Software on a standalone basis, you will do so under the terms of this Agree-ment or your own license agreement which (a) complies with the terms and conditions of
this Agreement; (b) effectively disclaims all warranties and conditions, express or implied,
on behalf of Adobe; (c) effectively excludes all liability for damages on behalf of Adobe; (d)
states that any provisions that differ from this Agreement are offered by you alone and not
Adobe and (e) states that the Software is available from you or Adobe and informs licens-
ees how to obtain it in a reasonable manner on or through a medium customarily used for
software exchange. Any distributed Software will include the Adobe copyright notices as
included in the Software provided to you by Adobe.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 5/254
4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis.
Adobe makes no representation as to the adequacy of the Software for any particular pur-
pose or to produce any particular result. Adobe shall not be liable for loss or damage aris-
ing out of this Agreement or from the distribution or use of the Software or any other
materials. ADOBE AND ITS SUPPLIERS DO NOT AND CANNOT WARRANT THE PER-
FORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE, EXCEPT
FOR ANY WARRANTY, CONDITION, REPRESENTATION OR TERM TO THE EXTENT
TO WHICH THE SAME CANNOT OR MAY NOT BE EXCLUDED OR LIMITED BY LAW APPLICABLE TO YOU IN YOUR JURISDICTION, ADOBE AND ITS SUPPLIERS MAKE
NO WARRANTIES, CONDITIONS, REPRESENTATIONS OR TERMS, EXPRESS OR
IMPLIED, WHETHER BY STATUTE, COMMON LAW, CUSTOM, USAGE OR OTHER-
WISE AS TO ANY OTHER MATTERS, INCLUDING BUT NOT LIMITED TO NON-
INFRINGEMENT OF THIRD PARTY RIGHTS, INTEGRATION, SATISFACTORY QUALITY
OR FITNESS FOR ANY PARTICULAR PURPOSE. YOU MAY HAVE ADDITIONAL
RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. The provisions of Sec-
tions 4, 5 and 6 shall survive the termination of this Agreement, howsoever caused, but this
shall not imply or create any continued right to use the Software after termination of this
Agreement.
5. LIMITATION OF LIABILITY IN NO EVENT WILL ADOBE OR ITS SUPPLIERS BE LIABLETO YOU FOR ANY DAMAGES, CLAIMS OR COSTS WHATSOEVER OR ANY CONSE-
QUENTIAL, INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR LOST
SAVINGS, EVEN IF AN ADOBE REPRESENTATIVE HAS BEEN ADVISED OF THE POS-
SIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS OR FOR ANY CLAIM BY
ANY THIRD PARTY. THE FOREGOING LIMITATIONS AND EXCLUSIONS APPLY TO
THE EXTENT PERMITTED BY APPLICABLE LAW IN YOUR JURISDICTION. ADOBE'S
AGGREGATE LIABILITY AND THAT OF ITS SUPPLIERS UNDER OR IN CONNECTION
WITH THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT PAID FOR THE SOFT-
WARE. Nothing contained in this Agreement limits Adobe’s liability to you in the event of
death or personal injury resulting from Adobe’s negligence or for the tort of deceit (fraud). Adobe is acting on behalf of its suppliers for the purpose of disclaiming, excluding and/or
limiting obligations, warranties and liability as provided in this Agreement, but in no other
respects and for no other purpose.
6. TRADEMARKS Adobe and the Adobe logo are the registered trademarks or trademarks of
Adobe in the United States and other countries. With the exception of referential use, you
will not use such trademarks or any other Adobe trademark or logo without separate prior
written permission granted by Adobe.
7. TERM This Agreement is effective until terminated. Adobe has the right to terminate this
Agreement immediately if you fail to comply with any term hereof. Upon any such termina-
tion, you must return to Adobe all full and partial copies of the Software in your possession
or control.
8. GOVERNMENT REGULATIONS If any part of the Software is identified as an export con-
trolled item under the United States Export Administration Act or any other export law,
restriction or regulation (the “Export Laws”), you represent and warrant that you are not a
citizen, or otherwise located within, an embargoed nation (including without limitation Iran,
Iraq, Syria, Sudan, Libya, Cuba, North Korea, and Serbia) and that you are not otherwise
prohibited under the Export Laws from receiving the Software. All rights to use the Software
are granted on condition that such rights are forfeited if you fail to comply with the terms of
this Agreement.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 6/254
9. GOVERNING LAW This Agreement will be governed by and construed in accordance with
the substantive laws in force in the State of California as such laws are applied to agree-
ments entered into and to be performed entirely within California between California resi-
dents. This Agreement will not be governed by the conflict of law rules of any jurisdiction or
the United Nations Convention on Contracts for the International Sale of Goods, the appli-
cation of which is expressly excluded. All disputes arising out of, under or related to this
Agreement will be brought exclusively in the state Santa Clara County, California, USA.
10. GENERAL You may not assign your rights or obligations granted under this Agreementwithout the prior written consent of Adobe. None of the provisions of this Agreement shall
be deemed to have been waived by any act or acquiescence on the part of Adobe, its
agents, or employees, but only by an instrument in writing signed by an authorized signa-
tory of Adobe. When conflicting language exists between this Agreement and any other
agreement included in the Software, the terms of such included agreement shall apply. If
either you or Adobe employs attorneys to enforce any rights arising out of or relating to this
Agreement, the prevailing party shall be entitled to recover reasonable attorneys’ fees. You
acknowledge that you have read this Agreement, understand it, and that it is the complete
and exclusive statement of your agreement with Adobe which supersedes any prior agree-
ment, oral or written, between Adobe and you with respect to the licensing to you of the
Software. No variation of the terms of this Agreement will be enforceable against Adobeunless Adobe gives its express consent, in writing, signed by an authorized signatory of
Adobe.
ICC Profile for TOYO INK Standard Color on Coated paper (TOYO Offset Coated 2.0)
This ICC Profile (TOYO Offset Coated 2.0) characterizes Japanese offset press on Coatedpaper and is fully compatible with ICC profile format.
About “TOYO INK Standard Color on Coated paper”
This is the standard for color reproduction of sheet-fed offset press on Coated paper made by
TOYO INK MFG.CO., LTD. (“TOYO INK”).
This standard is made from printing test with using TOYO INK’s sheet-fed offset printing inks
and TOYO INK’s own printing conditions.
“TOYO INK Standard Color on Coated paper” is compatible with “JAPAN COLOR”.
Agreement
1. The reproduction of images on a printer or a monitor using this ICC Profile do not com-
pletely match the TOYO INK Standard Color on Coated paper.
2. Any and all copyrights of this ICC Profile shall remain in TOYO INK; therefore you shall not
transfer, provide, rent, distribute, disclose, or grant any rights in this ICC Profile to any third
party without the prior written consent of TOYO INK.
3. In no event will TOYO INK its directors, officers, employees or agents be liable to you for
any consequential or incidential, either direct or indirect, damages(including damages for
loss of business profits, business interruption, loss of business information, and the
like)arising out of the use or inability to use this ICC Profile.4. TOYO INK shall not be responsible for answering any question related to this ICC Profile.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 7/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 8/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 9/254
Contents
Contents i
1 Introduction .......................................................................................................1Getting Acquainted with Your Printer 2
Space Requirements 2
Printer Parts 3
Front View 3
Rear View 4
Front View with Options 4
2 About the Software ........................................................................................... 5
Software Utilities CD-ROM 6PostScript Drivers 6
PCL Drivers 6
PPD Files 7
Utilities 7
System Requirements 9
Selecting Driver Options/Defaults (for Windows) 10
Windows Server 2003/XP/2000/NT 4.0 (PostScript and PCL6) 10
Windows Me/98SE (PCL6) 11
Windows Me/98SE (PPD) 12
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 10/254
Contentsii
Uninstalling the Windows Printer Driver 13
Displaying Windows Printer Driver Settings 14
Windows Server 2003/XP 14
Windows 2000/NT 4.0/Me/98SE 14
Using the Postscript and PCL Printer Drivers 15
Common Buttons 15
OK 15
Cancel 15
Apply 15
Help 15
Easy Set 15
Paper View 16
Printer View 16
Watermark View 16
Quality View 16
Default 16
Advanced Tab (PostScript Printer Driver Only) 16Basic Tab 17
Layout Tab 17
Cover Page Tab 17
Overlay Tab 18
Watermark Tab 18
Quality Tab 18
Version Tab 19
Limitations on Printer Driver Functions Installed with Point and Print 19
Using the Windows Me/98SE PPD File 20
Common Buttons 20
OK 20
Cancel 20
Apply 20
Restore Defaults 20
Paper Tab 20
Graphics Tab 21
3 Using the Status Monitor (Windows Only) ....................................................23
Working with the Status Monitor 24Introduction 24
Operating Environment 24
Opening the Status Monitor 24
Using the Status Monitor 24
Recognizing Status Monitor Alerts 25
Recovering from a Status Monitor Alert 25
Closing the Status Monitor 25
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 11/254
Contents iii
4 Printer Control Panel and Configuration Menu ............................................ 27
About the Control Panel 28
Control Panel Indicators and Keys 28
Message Window 30
Help Screens 31
Configuration Menu Overview 32
Main Menu 32
PROOF/PRINT MENU 33
Printing/Deleting a Stored Job 33
Entering a Password 34
PRINT MENU 36
PAPER MENU 38
QUALITY MENU 45
CAMERA DIRECT MENU 61
INTERFACE MENU 64
SYS DEFAULT MENU 67
MAINTENANCE MENU 77SERVICE MENU 82
5 Camera Direct ..................................................................................................83
Camera Direct 84
Printing Directly from a Digital Camera 84
6 Using Media ..................................................................................................... 87
Media Specifications 88
Media Types 89Plain Paper (Recycled Paper) 89
Thick Stock 91
Envelopes 92
Labels 94
Letterhead 95
Postcards 95
Transparencies 96
Glossy Stock 97
What Is the Guaranteed Imageable (Printable) Area? 99
Imageable Area—Envelopes 99Page Margins 99
Loading Media 100
Tray 1 (Manual Feed Tray) 100
Loading Plain Paper 100
Other Media 102
Loading Envelopes 103
Loading Label Sheets/Postcards/Thick Stock/Glossy Stock and Transpar-
encies 107
Loading the Banner Paper 109
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 12/254
Contentsiv
Tray 2 111
Loading Media 111
Printing on Envelopes 114
Tray 3/4/5 (Optional Lower Feeder Units) 117
Loading Plain Paper 117
Duplexing 120
Output Tray 122
Media Storage 123
7 Replacing Consumables ...............................................................................125
Replacing Consumables 126
About Toner Cartridges 126
Replacing a Toner Cartridge 128
Replacing a Imaging Unit 132
Replacing the Waste Toner Bottle 137
Replacing the Backup Battery 139
8 Maintaining the Printer ..................................................................................143
Maintaining the Printer 144
Cleaning the Printer 148
Exterior 148
Media Rollers 149
Cleaning the Media Feed Rollers (Manual Feed Tray) 149
Cleaning the Media Feed Rollers (Tray 2/3/4/5) 150
Cleaning the Duplex Option Feed Rollers 151
Cleaning the Media Transfer Rollers for Tray 3/4/5 152Cleaning the Laser Lens 153
9 Troubleshooting ............................................................................................155
Introduction 156
Printing a Configuration Page 156
Preventing Media Misfeeds 157
Understanding the Media Path 158
Clearing Media Misfeeds 159
Media Misfeed Messages and Clearing Procedures 160
Clearing a Media Misfeed in Tray 2 161Clearing a Media Misfeed in Tray 3/4/5 165
Clearing a Media Misfeed from the Duplex Option 167
Clearing a Media Misfeed from the Fuser Unit 168
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) and Transfer
Roller 172
Solving Problems with Media Misfeeds 175
Solving Other Problems 178
Solving Problems with Printing Quality 183
Status, Error, and Service Messages 189Standard Status Messages 189
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 13/254
Contents v
Error Messages (Warning: ) 190
Error Messages (Operator Call: ) 195
Service Messages: 200
10 Installing Accessories ..................................................................................201
Introduction 202
Antistatic Protection 203
Dual In-Line Memory Module (DIMM) 204
Installing a DIMM 204
Hard Disk 206
Installing a Hard Disk 206
CompactFlash 208
Installing the CompactFlash card 208
Duplex Option 211
Kit Contents 211
Installing the Duplex Option 211
Lower Feeder Unit 216Kit Contents 216
Installing a Lower Feeder Unit 216
Caster Base 225
Kit Contents 225
Installing the Caster Base 226
Banner Tray 229
Installing the Banner Tray 229
A Appendix ........................................................................................................ 233Safety Specifications 234
Technical Specifications 234
Printer 234
Consumable Life Expectancy Chart 238
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 14/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 15/254
Introduction
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 16/254
Getting Acquainted with Your Printer 2
Getting Acquainted with Your Printer
Space Requirements
To ensure easy operation, consumable replacement and maintenance,
adhere to the recommended space requirements detailed below.
The options appear shaded in the above illustrations.
650 mm (25.6")
577 mm (22.7")
4 6 3
m m ( 1
8 . 2
" )
8 4 8 m m ( 3 3 . 4
" )
1 2 4 m m
( 4 . 9
" )
603 mm (23.7") 100 mm(3.9")
Front View
Side View
1 2 4 m m
( 4 . 9
" )
1 2 4 m m
( 4 . 9
" )
437 mm (17.2")
9 0 7 m m ( 3
5 . 7
" )
5 3 5
m m ( 2
1 . 1
" )
3 7 2 m m ( 1
4 . 6
" )
966 mm (38.0")
100 mm
(3.9")
100 mm
(3.9")
1 0 0 m m
( 3 . 9
" )
100 mm(3.9")
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 17/254
Getting Acquainted with Your Printer 3
Printer Parts
The following drawings illustrate the parts of your printer referred to through-
out this guide, so please take some time to become familiar with them.
Front View
1—Control panel
2—Toner cartridge (Cyan, Magenta,
Yellow)
3—Toner cartridge (Black)
4—Output tray
5—Top cover
6—Fuser unit
7—Transfer belt unit
8—Filter 1 (Air filter)
9—Transfer roller
10—Right side cover
11—Tray 1 (Manual feed tray)
12—Tray 2
13—Grip
14—Imaging unit
15—Front cover
16—Laser lens cleaning tool
17— Waste toner bottle
18—Power switch
1 3 5 6 7
11
9
10
13 1216
2 4
8
14
17
15
18
14
17
3
M
Y
2
16
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 18/254
Getting Acquainted with Your Printer 4
Rear View
1—Filter 2 (Dust filter)
2—Digital Camera Direct Print Port
3—10Base-T/100Base-TX/
1000Base-T ethernet interface
port
4—USB port
5—Parallel port
6—Filter 3 (Ozone filter)
7—Power connection
8—Option cassette connector
9—Ventilation grilles
Front View with Options
1—Duplex option
2—Lower feeder units (Tray 3/4/5)
1 2
3
7
5
8
4
6
9
2
1
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 19/254
About theSoftware
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 20/254
Software Utilities CD-ROM 6
Software Utilities CD-ROM
PostScript Drivers
When using Windows Me/98SE, use the PPD file for Windows Me/
98SE. See also “Displaying Windows Printer Driver Settings” on page
14.
A specific PPD file has been prepared for applications (such as Page-Maker and CorelDRAW) that require that a PPD file be specified when
printing.
When specifying a PPD file while printing on Windows XP, Server
2003, 2000 and NT 4.0, use the specific PPD file provided on the Soft-
ware Utilities CD-ROM in drivers\<operating_system>\PPD.
When installing the PostScript driver for Windows NT 4.0, the Service
Pack 6a CD-ROM provided by Microsoft is required.
PCL Drivers
Operating System Use/Benefit
Windows Server 2003/XP/2000 These drivers give you access to all of
the printer features, including finish-
ing and advanced layout. See also
“Displaying Windows Printer Driver
Settings” on page 14.
Windows NT 4.0
Operating System Use/Benefit
Windows Server 2003/XP/2000 These drivers give you access to all of
the printer features, including finish-
ing and advanced layout. See also
“Displaying Windows Printer Driver
Settings” on page 14.
Windows Me/98SE
Windows NT 4.0
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 21/254
Software Utilities CD-ROM 7
PPD Files
For details on the installation of the Windows printer drivers, refer to
the magicolor 7450 Installation Guide on the DocumentationCD-ROM.
Utilities
Operating System Use/Benefit
Windows Server 2003/XP/2000/NT
4.0/Me/98SE
These PPD files allow you to install
the printer for a variety of platforms,
drivers, and applications.
Macintosh OS X/9 These files are required in order touse the printer driver for each operat-
ing system.
For details of the Macintosh and Linux
printer drivers, refer to the magicolor
7450 Reference Guide on the Docu-
mentation CD-ROM.
Linux
Utility Use/Benefit
Download Manager This utility, which can be used only if a
optional hard disk is installed, enables
fonts and overlay data to be down-
loaded to a printer hard disk.
For details on the installation, refer to
the Download Manager online help for
all of the functions.
Crown Print Monitor for Windows Using the TCP/IP protocol, print jobs
can be sent directly to the printer. For
details, refer to the magicolor 7450
Reference Guide on the Documenta-
tion CD-ROM.
Status Monitor (Windows only) The current status of the printer in
addition to the status of consumables
and error information can be viewed.
For details, refer to See “Using the
Status Monitor (Windows Only)” on
page 23.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 22/254
Software Utilities CD-ROM 8
PageScope Net Care Printer management functions such as
status monitoring and network settings
can be accessed.
For details, refer to the PageScope
Net Care Quick Guide on the Software
Utilities CD-ROM.
PageScope Web Connection With a Web browser, the status of
printers can be checked, and the vari-
ous settings can be changed.
For details, refer to the magicolor
7450 Reference Guide on the Docu-
mentation CD-ROM.
PageScope Network Setup Using the TCP/IP and IPX protocols,
basic network printer settings can be
specified.
For details, refer to the PageScope
Network Setup User Manual on the
Software Utilities CD-ROM.
PageScope Plug and Print This utility automatically detects a new
printer connected to the network and
creates a print object on the Windows
print server.
For details, refer to the PageScope
Plug and Print Quick Guide on theSoftware Utilities CD-ROM.
PageScope NDPS Gateway This network utility enables KONICA
MINOLTA printers and multifunctional
products to be used in an NDPS envi-
ronment.
For details, refer to the PageScope
NDPS Gateway User Manual on the
Software Utilities CD-ROM.
Peer to Peer Printing Tool Setups for peer-to-peer printing in
Windows 98 and Windows Me.
Peer-to-peer printing refers to printing
directly to a device on the network
instead of through the server.
For details, refer to the Peer to Peer
Printing Tool Users Guide on the Soft-
ware Utilities CD-ROM.
Utility Use/Benefit
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 23/254
System Requirements 9
System Requirements
Personal computer
– Pentium 2: 400 MHz (Pentium 3: 500 MHz or higher is recommended)
– Power Mac G3 or later (G4 or later is recommended)
– Intel Core Duo (iMac or MacBook Pro) or later Operating System
– Microsoft Windows Server 2003, Windows Server 2003 x64 Edition,
Windows XP Home Edition/Professional (Service Pack 1 or later; Ser-
vice Pack 2 or later is recommended), Windows XP Professional x64
Edition, Windows 2000 (Service Pack 4 or later), Windows NT 4.0
(Service Pack 6), Windows Me, Windows 98SE
The 64-bit driver support x64 operating systems running on
AMD64 or Intel Pentium 4 with EM64T platforms. – Mac OS X (10.2 or later; We recommend installing the newest patch),
Mac OS X Server (10.2 or later)
– Mac OS 9 (9.1 or later), Mac OS X (10.2 or later) Classic mode
– Red Hat Linux 9.0, SuSE Linux 8.2
Free hard disk space
– Approximately 20 MB of free hard disk space for the printer driver and
Status Monitor
– Approximately 128 MB of free hard disk space for image processing
RAM
128 MB or more
CD-ROM/DVD drive
I/O interface
– 10Base-T/100Base-TX/1000Base-T Ethernet interface port
– USB 2.0 (High Speed) compliant port
– Parallel (IEEE 1284) port
For details of the Macintosh and Linux printer drivers, refer to the mag-
icolor 7450 Reference Guide on the Documentation CD-ROM.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 24/254
Selecting Driver Options/Defaults (for Windows)10
Selecting Driver Options/Defaults(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
Windows Server 2003/XP/2000/NT 4.0 (PostScript andPCL6)
1 Choose the driver’s properties as follows:
– (Windows Server 2003/XP)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
mc7450 PCL6 or KONICA MINOLTA mc7450 PS printer icon and
choose Properties.
– (Windows 2000/NT 4.0)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA mc7450
PCL6 or KONICA MINOLTA mc7450 PS printer icon and choose
Properties.
2 If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3 Select the Configure tab.4 Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5 Click the Refresh to automatically configure installed options.
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
6 From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.
7 Click Apply.
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 25/254
Selecting Driver Options/Defaults (for Windows) 11
With Windows NT 4.0, right-click the KONICA MINOLTA mc7450
PCL6 printer icon or the KONICA MINOLTA mc7450 PS printer
icon in the Printers directory, and then click Document Defaults.
Skip to step 10.
8 Select the General tab.
9 Click Printing Preferences.
Printing Preference dialog box appears.
10 Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
11 Click Apply.
12 Click OK to exit from the Print preference dialog box.
13 Click OK to exit from the Properties dialog box.
Windows Me/98SE (PCL6)
1 Choose the driver’s properties as follows:
– From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA mc7450
PCL6 printer icon and choose Properties.
2 Select the Configure tab.
3 Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 7.
4 Click the Refresh to automatically configure installable options.
The Refresh is available only if bi-directional communication is
available with the printer, otherwise it is grayed out.
5 From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.6 Click Apply.
7 Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
8 Click Apply.
9 Click OK.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 26/254
Selecting Driver Options/Defaults (for Windows)12
Windows Me/98SE (PPD)
1 Choose the driver’s properties as follows:
– From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA mc7450
PPD printer icon and choose Properties.
2 Select the Device Options tab.
3 Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 6.
4 From the Installable options list, select an option, one at a time, and
then select Enable or Disable from the Change setting for: menu.
If VMOption is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.
5 Click Apply.
6 Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
7 Click Apply.
8 Click OK.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 27/254
Uninstalling the Windows Printer Driver 13
Uninstalling the Windows Printer Driver
This section describes how to uninstall the KONICA MINOLTA mc7450
printer driver if necessary.
1 Close all applications.
2 Open the Printers directory.
– (Windows Server 2003/XP)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory.
– (Windows 2000/NT 4.0/Me/98SE)
From the Start menu, choose Settings and then Printers to display
the Printers directory.
3 Right-click the KONICA MINOLTA mc7450 PCL6 or KONICA MINOLTA
mc7450 PS printer icon or KONICA MINOLTA mc7450 PPD printer iconand choose Delete.
4 Click Yes to verify the driver deletion.
When using Windows NT 4.0/Me/98SE, Skip to Step 8.
5 (Windows Server2003/XP/2000) Select File / Server Properties from the
menu.
6 (Windows Server2003/XP/2000) Go to the Driver tab and select KONICA
MINOLTA mc7450 PCL6 or KONICA MINOLTA mc7450 PS driver andthen click Remove.
7 (Windows Server2003/XP/2000) Click Yes to verify the driver removal.
8 Restart your computer.
9 The KONICA MINOLTA mc7450 printer driver will be uninstalled from your
computer.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 28/254
Displaying Windows Printer Driver Settings14
Displaying Windows Printer Driver Settings
Windows Server 2003/XP
1 From the Start menu, choose Printers and Faxes to display the Printers
and Faxes directory.
2 Right-click the KONICA MINOLTA mc7450 PCL6 or KONICA MINOLTA
mc7450 PS printer icon and choose Printing Preferences.
Windows 2000/NT 4.0/Me/98SE
1 From the Start menu, point to Settings, and then click Printers to display
the Printers directory.
2 Display the printer driver settings:
Windows 2000—Right-click the KONICA MINOLTA mc7450 PCL6 orKONICA MINOLTA mc7450 PS printer icon and choose Printer Prop-
erties.
Windows NT 4.0—Right-click the KONICA MINOLTA mc7450 PCL6
or KONICA MINOLTA mc7450 PS printer icon and choose Document
Defaults.
Windows Me/98SE—Right- click the KONICA MINOLTA mc7450
PCL6 or KONICA MINOLTA mc7450 PPD printer icon and choose
Properties.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 29/254
Using the Postscript and PCL Printer Drivers 15
Using the Postscript and PCL PrinterDrivers
When using KONICA MINOLTA mc7450 PCL6 printer driver on Win-
dows Me/98SE, a tab for specifying printer settings appears in the dia-
log box.
For details on using KONICA MINOLTA mc7450 PPD on WindowsMe/98SE, refer to “Using the Windows Me/98SE PPD File” on page
20 .
Common Buttons
The buttons described below appear on each tab.
OK
Click to exit the Properties dialog box, saving any changes made.
Cancel
Click to exit the Properties dialog box without saving any changes made.
Apply
Click to save all changes without exiting the Properties dialog box.
Depending on the version of the operating system, Apply may not
appear.
Help
Click to view the help.
Easy Set
To save the current settings, enter a name, and then click Save. Afterward,
the saved settings can be selected from the drop-down list. To change the
registered setting, click Edit.
Select Defaults from the drop-down list to reset the functions in all tabs to
their default values.
Name: Type in the name of the settings to be saved.
Comment: Add a simple comment to the settings to be saved.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 30/254
Using the Postscript and PCL Printer Drivers16
Sharing: Specify whether or not the settings to be saved can be used by
other users logged onto the computer.
Paper View
Click the button to display a sample of the page layout in the figure area.
This button does not appear on the Advanced , Watermark , Quality
and Version tabs.
Printer View
Click the button to display an image of the printer (with all installed options) in
the figure area.
This button does not appear on the Advanced and Version tabs.
Watermark View
Click this button to display a preview of the watermark.
This button appears only when the Watermark tab is selected.
Quality View
Click this button to display a sample of the settings selected in the Quality tab.
This button appears only when the Quality tab is selected.
Default
Click this button to reset the settings to their defaults.
This button does not appear on the Advanced and Version tabs.
Advanced Tab (PostScript Printer Driver Only)
The Advanced Tab allows you to
Specify the PostScript output method
Specify whether or not the error messages of a print job are printed
Print a mirror image
Specify whether or not the application can directly output PostScript data
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 31/254
Using the Postscript and PCL Printer Drivers 17
Basic Tab
The Basic Tab allows you to
Specify the orientation of the media
Specify the size of the original document
Select the output media size
Zoom (expand/reduce) documents
Specify the paper source
Specify the type of media
Specify the number of copies
Turn on/off job collation
Save a print job on the printer and print it later (Job Retention)
Save a confidential job on the printer and protect it with a password
Print a single copy for proofing
Send a notification by e-mail when printing is finished
Specify user information such as e-mail addresses and passwords
Print on the back side of media that has already been printed on
Layout Tab
The Layout Tab allows you to Print several pages of a document on the same page (N-up printing)
Specify booklet printing
Rotate the print image 180 degrees
Specify duplex printing
Specify whether or not blank pages are printed (PCL printer driver only)
Adjust the binding margin (PCL printer driver only)
Adjust the printing position (PCL printer driver only)
Cover Page Tab
The Cover Page Tab allows you to
Print front and back cover pages and separator pages
Specify the tray that contains the media for the front and back cover
pages and separator pages
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 32/254
Using the Postscript and PCL Printer Drivers18
Overlay Tab
Be sure to use overlays with print jobs with a media size and orienta-
tion that matches the overlay form.
In addition, if settings have been specified for “N-up” or “Booklet” in
the printer driver, the overlay form cannot be adjusted to match the
specified settings.
The Overlay Tab allows you to
Select the form to use
Add or delete overlay files
Launch Download Manager to download a form (PostScript printer driver
only)
Download Manager Application should be installed earlier.
Create a form (PCL printer driver only)
Specify that the document and form are printed overlapping (PCL printer
driver only)
Display the form information (PCL printer driver only)
Print the form on All Pages, First Page, Even Pages and Odd Pages
Place the form in back of the document or in front on the printed docu-
ment (PCL printer driver only)
Watermark TabThe Watermark Tab allows you to
Select the watermark to be used
Create, edit or delete watermarks
Lighten the density of the watermark
Print the watermark on only the first page
Print the watermark on the all pages
Quality Tab
The Quality Tab allows you to
Switch between color and grayscale printing
Control the darkness of an image (Brightness)
Specify the printer color settings (Quick Color)
Specify the resolution for the printout
Perform color separation
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 33/254
Using the Postscript and PCL Printer Drivers 19
Specify the format of fonts that are to be downloaded
Print using the printer’s fonts
Control the tones of an image (Contrast) (PCL printer driver only)
Specify the image compression method (PCL printer driver only)
Version TabThe Version Tab allows you to view information about the printer driver.
Limitations on Printer Driver Functions Installed withPoint and Print
If Point and Print is performed with the following server and client combina-
tions, there are limitations on some printer driver functions.
Server and client combinationsServer: Windows Server 2003/XP/2000
Client: Windows NT 4.0
Functions with limitations applied
Booklet, Skip Blank Pages, Front Cover Page, Back Cover Page, Separa-
tor Page, Create Overlay, Print Overlay, Watermark
*JOBNAME, USERNAME, and HOSTNAME output of PJL
When using these operating system combinations, install the printer driver on
the client with a local connection, and then specify the shared printer installed
on the server as the connection.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 34/254
Using the Windows Me/98SE PPD File20
Using the Windows Me/98SE PPD File
A tab for specifying printer settings appears in the dialog box.
Common Buttons
The buttons described below appear on each tab.
OK
Click to exit the Properties dialog box, saving any changes made.
Cancel
Click to exit the Properties dialog box without saving any changes made.
Apply
Click to save all changes without exiting the Properties dialog box.
Depending on the version of the operating system, Apply may not
appear.
Restore Defaults
Click this button to reset the settings to their defaults.
Paper Tab
The Paper Tab allows you to
Specify the size of the original document
Print several pages of a document on the same page (N-up printing)
Specify the orientation of the media
Rotate the print image 180 degrees
Specify the paper source
Specify the number of copies
Specify the desired media size when a Custom page is selected
Specify the margins at the top, bottom, left and right
Specify duplex printing
Specify media type
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 35/254
Using the Windows Me/98SE PPD File 21
View information about the printer driver
Graphics Tab
The Graphics Tab allows you to
Specify the resolution for the printout
Specify the printer color settings
Select the halftone setting
Switch between color and monochrome printing
Print a mirror image
Scale (expand/reduce) documents
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 36/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 37/254
Using the StatusMonitor
(Windows Only)
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 38/254
Working with the Status Monitor 24
Working with the Status Monitor
Introduction
The Status Monitor shows information about the current status of the printer.
The Status Monitor can be installed from the Software Utilities CD-ROM.
For details on the installation, refer to the magicolor 7450 Reference Guide
on the Documentation CD-ROM.
Operating Environment
The Status Monitor can be used on computers running Windows XP/
Server 2003/2000/Me/98SE/NT 4.0 connected to the printer using an Ether-
net connection.
When Windows NT 4.0 is used, install Windows Media Player (version 6.4 orlater).
Opening the Status Monitor
Use one of the following steps to open the Status Monitor:
Windows Server 2003/XP—From the Start menu, choose All Pro-
grams, KONICA MINOLTA, and then Status Monitor . Double-click the
Status Monitor icon displayed in the taskbar.
Windows 2000/NT 4.0/Me/98SE—From the Start menu, choose Pro-
grams, KONICA MINOLTA, and then Status Monitor . Double-click the
Status Monitor icon displayed in the taskbar.
Using the Status Monitor
Status Tab
Select Printer —Selects the printer whose status is displayed. In addition,
the messages that appear in the message window of the selected printerare displayed.
Graphic—Shows a graphic representation of the printer and indicates
where the problem is. When the background of the printer graphic is red
or yellow, there is an error and the job has been interrupted.
Advanced Options—Click Advanced Options to display the Advanced
Options dialog box. From the Advanced Options dialog box, select
whether the Status Monitor automatically starts when the operating sys-
tem is started and whether error notifications are sent by e-mail.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 39/254
Recognizing Status Monitor Alerts 25
Order Supplies—Click Order Supplies to automatically access the order
page for supplies. The address of the page that is accessed can be spec-
ified from the Advanced Options dialog box.
Printer Alerts—Displays text messages that alert you of conditions such
as low toner.
Recovery Instructions—Provides you with explanations of what you
need to do in order to correct problems and recover from error conditions.
Consumables Tab
Displays the usage status (approximate percentage remaining) of each con-
sumable.
Order Supplies—Click Order Supplies to automatically access the order
page for supplies. The address of the page that is accessed can be spec-
ified from the Advanced Options dialog box.
Refresh—Rechecks the supplies and displays their status.
Click Help to display windows containing explanations of the Status
Monitor functions. Refer to this help for detailed information.
The percentages remaining for the consumables displayed using the
Status Monitor may be different from the actual amounts and should
only as reference.
Recognizing Status Monitor AlertsWhen the Status Monitor detects a printing problem, the icon on the Windows
task bar changes from green (normal) to yellow (warning), orange or red
(error), depending on the severity of the printer problem.
Recovering from a Status Monitor Alert
When the Status Monitor notifies you of a printing problem, double-click itsicon on the Windows task bar to open the Status Monitor. The Status Monitor
identifies what type of error has occurred.
Closing the Status Monitor
Click Close to close the Status Monitor window. To exit Status Monitor,
right-click the Status Monitor icon in the taskbar, and then click Exit.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 40/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 41/254
Printer Control Panel and
ConfigurationMenu
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 42/254
About the Control Panel 28
About the Control Panel
The control panel, located on the top of the printer, allows you to direct the
printer’s operation. In addition, it displays the current status of the printer,
including any condition that needs your attention.
Control Panel Indicators and Keys
No. Indicator Off On
1 The printer is not ready
to accept data.
The printer is ready to
accept data.
2 No problem. The printer requires
operator attention
(usually accompanied by
a status message in the
message window.)
1
4 5 6
3
8 7
2
MESSAGE
WINDOW
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 43/254
About the Control Panel 29
No. Key Function
3 Cancels the currently displayed menu or menu
choice
Allows you to cancel one or all print jobs that
are currently being printed or processed:
1. Press the Cancel key.
2. Press the Up or Down keys to select either
CURRENT JOB or ALL JOBS.
3. Press the Select key.
The print job(s) is (are) cancelled.
4 Enters the menu system
Moves down in the menu structure
Applies the selected setting
appears in the message window
5 Moves the cursor up
Returns to the status screen from the help
screen
Within a menu choice that is changeable char-
acter by character, scrolls upward through theavailable characters
, appears in the message window
6 Moves the cursor to the right
Displays the next help screen
appears in the message window
7 Moves the cursor down
Displays the help screen when an error occurs
Within a menu choice that is changeable char-
acter by character, scrolls downward through
the available characters
, appears in the message window
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 44/254
About the Control Panel 30
Message Window
The current status of the printer, the amount of toner remaining, and any error
messages can be viewed from the message window.
8 Moves the cursor to the left
Displays the previous help screen
appears in the message window
No. Details
1 The current status of the printer is displayed.
If the operator or service representative must be called, the sym-
bol and the error status are displayed.
If a warning occurs, the symbol appears on the right side of
the window.
If a print job is being received, the symbol appears on the
right side of the window.
If a digital camera is connected, the symbol appears on the
right side of the window.
2 Error messages are displayed.
While a print job is being received, the user name and the print
progress are displayed.
While updating the firmware, the type of firmware being updated
and the update progress are displayed.
3 Key information is displayed.
4 The approximate amount of toner remaining is displayed.
No. Key Function
YMCKMENU
1
3
2
4
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 45/254
About the Control Panel 31
Help Screens
The help screens appear when the Down key is pressed after an error
occurred, such as a media misfeed, so that the error can be corrected.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 46/254
Configuration Menu Overview 32
Configuration Menu Overview
The magicolor 7450 configuration menu accessible from the control panel is
structured as shown below.
Main Menu
* This menu item appears only if an optional hard disk is installed.
** This menu item appears when INTERFACE MENU/CAMERA
DIRECT is set to ENABLE .
MENU
PAPER
MENU
CAMERA
DIRECT**
INTERFACE
MENU
SYS DEFAULT
MENU
PROOF/
PRINT MENU*
QUALITY
MENU
READY
MAINTENANCE
MENU
SERVICE
MENU
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 47/254
Configuration Menu Overview 33
PROOF/PRINT MENU
This menu item appears only if an optional hard disk is installed.
With this menu item, print jobs that were set to be saved on the hard disk by
using Job Retention on the Basic tab of the printer driver can be printed or
deleted.
All factory default values are shown in bold.
Printing/Deleting a Stored Job
1 Follow the procedure described below to select a job.
Press Key Until Display Reads
PROOF/PRINT MENU
“User name”
If no print jobs have been stored on the hard disk,
NO STORED JOB appears.
,
Desired user name
PROOF/
PRINT MENU
“User name”
“Job name”
DELETE
“Job name”
COPIES
1
“Job name”
YES
NO
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 48/254
Configuration Menu Overview 34
2 Select PRINT or DELETE, and then press the Menu/Select key.
If PRINT was selected, continue with step 3.
If DELETE was selected, continue with step 5.
3 Press the Up and Down keys to specify the number of copies to be
printed. (Settings: 1 to 999; Default: 1)
4 Press the Menu/Select key.
Printing begins.
5 Select YES or NO.
6 Press the Menu/Select key.
If YES was selected, the print job is deleted.
If NO was selected, the PRINT/DELETE selection screen appears
again.
Entering a Password
If the print job selected in the PROOF/PRINT MENU is a secured job, a
screen for entering the password appears. Follow the procedure described
below to type in the four-digit password specified from the printer driver.
1 Press the Up and Down keys to increase or decrease the first digit of the
password.
2 Press the Right key to move the cursor to the next digit.
“Job name”
,Desired job name
DELETE
If the selected print job was set as a secured job
from the printer driver, a screen for entering the
password appears. For details on typing the
password, refer to “Entering a Password” on page
34.
Press Key Until Display Reads
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 49/254
Configuration Menu Overview 35
3 Press the Up and Down keys to increase or decrease the second digit of
the password.
4 Continue these steps until all four digits of the password are specified.
5 Press the Menu/Select key.
The PRINT/DELETE selection screen appears.
If an incorrect password is entered, INVALID ENTRY appears and
the screen for entering the password appears again.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 50/254
Configuration Menu Overview 36
PRINT MENU
With this menu, printer information, such as the configuration page and the
demo page, can be printed.
* This menu item appears only if an optional hard disk is installed.
All factory default values are shown in bold.
CONFIGURA-
TION PG
Settings PRINT/CANCEL
Prints a configuration page.
DEMO PAGE Settings PRINT/CANCEL
Prints a demo page.
STATISTICS
PAGE
Settings PRINT/CANCEL
Prints a statistics page, which includes such details as the
number of pages printed.
POSTSCRIPT
PCL
MENU MAP
DIRECTORY LIST*
CONFIGURATION
PG
FONT LIST
DEMO PAGE
STATISTICS PAGE
PRINT MENU
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 51/254
Configuration Menu Overview 37
The amounts remaining for the supplies/parts status and coverage
information displayed using the statistics page may be different from
the actual amounts and should be used only as reference.
FONT LIST POST
SCRIPT
Settings PRINT/CANCEL
Prints a PostScript font list.
PCL Settings PRINT/CANCEL
Prints a PCL font list.
MENU MAP Settings PRINT/CANCEL
Prints a menu map.
DIRECTORY
LIST
Settings PRINT/CANCEL
Prints a directory list of the hard disk.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 52/254
Configuration Menu Overview 38
PAPER MENU
With this menu, the media used for printing can be managed.
PAPER TYPE
DEFAULT TRAY
TRAY 1 PAPER SIZE
CUSTOM SIZE****
TRAY 2
PAPER TYPE
PAPER SIZE
PAPER SOURCE
COLLATE**
DUPLEX*
COPIES
PAPER MENU
CUSTOM SIZE*****
SIZE SETTING
TRAY CHAINING
TRAY 4***
PAPER TYPE
PAPER SIZE
PAPER TYPE
PAPER SIZE
PAPER SIZE
PAPER TYPE
LOGICAL TRAY0-9
TRAY 3***
TRAY 5***
TRAY MAPPING
MODE
TRAY MAPPING
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 53/254
Configuration Menu Overview 39
* This menu item appears only if the optional duplex unit is installed.
** This menu item appears only if an optional hard disk is installed.
*** These menu items appear only if corresponding optional lower
feeder unit is installed.
****This menu item appears only when you select CUSTOM from the
TRAY 1/PAPER SIZE menu.
*****This menu item appears only when you select CUSTOM from the
TRAY 2/PAPER SIZE menu.
All factory default values are shown in bold.
PAPER
SOURCE
DEFAULT
TRAY
Settings TRAY 1/TRAY 2/
TRAY 3/TRAY 4/TRAY 5
The tray that is normally used can be specified.
TRAY 3/4/5 appear only if an optional lower
feeder unit is installed.
TRAY 1 PAPER
SIZE
Settings ANY/LETTER/LETTER-R/
11x17/LEGAL/EXECU-
TIVE/A3WIDE/A3/ A4/
A4-R/A5/A6/B4(JIS)/
B5(JIS)/B5(JIS)-R/
B6(JIS)/GOVT LETTER/
STATEMENT/FOLIO/SP
FOLIO/UK QUARTO/FOOLSCAP/GOVT LEGAL/
16K/12x18/11x14/4x6/
D8K/KAI 8/KAI 16/KAI
32/ENV C5/ENV C6/ENV
DL/ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of media
loaded into Tray 1.
“-R” added at the end of the name
for media sizes indicates that the
media is loaded vertically.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 54/254
Configuration Menu Overview 40
Selecting “ANY” is considered the
same as if media with the size
specified from the printer driver is
loaded, and the pages are printed
without the actual media size
selected. Be sure to load mediawith the specified size.
Refer to “SIZE ERR” on Page 198 .
The default setting for North
America is LETTER. The default
setting for all other regions is A4.
CUSTOM
SIZE
Specify the media size when
custom-sized media is loaded into Tray 1.
The setting units can be switched
between millimeters and inches with the
SYSTEM-PAPER-UNIT OF
MEASURE setting.
Setting range for WIDTH
For MILLIMETERS: 90 to 311 mm
(The default is 210.)
For INCHES: 3.55 to 12.25 in.
(The default is 8.50.)
Setting range for LENGTH
For MILLIMETERS: 140 to 1200
mm (The default is 297.)
For INCHES: 5.50 to 47.24 (The
default is 11.00.)
This menu item appears only if
PAPER SIZE is set to CUSTOM .
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 55/254
Configuration Menu Overview 41
PAPER
TYPE
Settings ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
TRANSPARENCY 2/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSYSelect the setting for the type of media
loaded into Tray 1.
Selecting “ANY” is considered thesame as if media with the typespecified from the printer driver isloaded, and the pages are printedwithout the actual media typeselected. Be sure to load media with
the specified type.Refer to “TYPE ERR” on Page 199.
TRAY 2 PAPER
SIZE
Settings ANY/LETTER/LETTER-R/
11x17/LEGAL/EXECU-
TIVE/A3WIDE/A3/ A4/
A4-R/A5/A6/B4(JIS)/
B5(JIS)/B5(JIS)-R/
B6(JIS)/GOVT LETTER/
STATEMENT/FOLIO/SP
FOLIO/UK QUARTO/
FOOLSCAP/GOVT LEGAL/
16K/12x18/11x14/4x6/
D8K/KAI 8/KAI 16/KAI
32/ENV C5/ENV C6/ENV
DL/ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of media
loaded into Tray 2.
This menu item appears only ifSIZE SETTING is set to USERSELECT .With any other setting, the mediasize set for TRAY2 is automaticallydetected.
The default setting for North America is LETTER. The defaultsetting for all other regions is A4.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 56/254
Configuration Menu Overview 42
CUSTOM
SIZE
Specify the media size when
custom-sized media is loaded into Tray 1.
The setting units can be switched
between millimeters and inches with the
SYSTEM-PAPER-UNIT OF
MEASURE setting.
Setting range for WIDTH
For MILLIMETERS: 90 to 311 mm
(The default is 210.)
For INCHES: 3.55 to 12.25 in.
(The default is 8.50.)
Setting range for LENGTH
For MILLIMETERS: 140 to457 mm
(The default is 297.)
For INCHES: 5.50 to 18.00 (The
default is 11.00.)
This menu item appears only if
PAPER SIZE is set to CUSTOM .
PAPER
TYPE
Settings ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
TRANSPARENCY 2/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY
Select the setting for the type of media
loaded into Tray 2.
SIZESETTING
Settings AUTO/USER SELECT
If AUTO is selected, the media size will
be automatically detected. For media
sizes that can be automatically detected
when AUTO is selected, refer to “DETECT
PAPER SIZE” on page 72.
If USER SELECT is selected, the media
size specified by the user is set.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 57/254
Configuration Menu Overview 43
TRAY 3
TRAY 4
TRAY 5
PAPER
SIZE
The size of media loaded in Tray 3/4/5 is
indicated. For media sizes that can be
automatically detected, refer to “DETECT
PAPER SIZE” on page 72.
This menu item only shows the current
setting. This setting cannot be changed.
PAPER
TYPE
Settings ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of media
loaded into Tray 3/4/5.
TRAY
CHAINING
Settings ON /OFF
If ON is selected and the specified tray runs out of
media during printing, a tray loaded with media of the
same size is automatically selected so printing cancontinue.
If OFF is selected and the specified tray runs out of
media, printing stops.
TRAY
MAPPING
TRAY
MAPPING
MODE
Settings ON/OFF
If ON is selected, logical tray 0 through 9
can be selected and the assigned tray of
this printer can be used.
If OFF is selected, a logical tray cannot
be used.
This setting is used to link a tray setting
specified from a third-party printer driver
with trays on this printer.
LOGICAL
TRAY 0-9
Settings PHYSICAL TRAY1-5
The physical tray assigned to each
logical tray can be specified.
The default setting for LOGICAL
TRAY 0 is PHYSICAL TRAY2.
The default setting for all other
trays is PHYSICAL TRAY1.
PHYSICAL TRAY 3/4/5 appear
only if an optional lower feeder unit
is installed.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 58/254
Configuration Menu Overview 44
DUPLEX Settings OFF/LONG EDGE/SHORT EDGE
If LONG EDGE is selected, the pages will be printed on both sides of
the media for long-edge binding.
If SHORT EDGE is selected, the pages will be printed on both sides
of the media for short-edge binding.
The setting specified in the printer driver overrides this menu setting.
COPIES Settings 1-9999
Specify the number of copies to be printed.
The setting specified in the printer driver overrides this menu setting.
COLLATE Settings ON/OFF
If ON is selected, all pages of the document are printed before the
next copy is printed.
If OFF is selected, all copies of the document are not printed
separately.
The setting specified in the printer driver overrides this menu setting.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 59/254
Configuration Menu Overview 45
QUALITY MENU
With this menu, settings for the print quality can be specified.
IMAGE PRINTING
COLOR MODE
BRIGHTNESS
PCL SETTING
RGB SOURCE
RGB INTENT
RGB GRAY
HALFTONE
QUALITY MENU
CONTRAST
TEXT PRINTING RGB SOURCE
RGB INTENT
RGB GRAY
HALFTONE
GRAPHICS
PRINTING
PS SETTING IMAGE PRINTING RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
HALFTONE
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 60/254
Configuration Menu Overview 46
TEXT PRINTING RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
HALFTONE
GRAPHICS
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
HALFTONE
SIMULATION PROF
SIMULATION
INTENT
CMYK GRAY
SIMULATION
TONE CALIBRATION
AIDC PROCESS
CALIBRATION
COLOR
SEPARATION
CMYK DENSITY
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 61/254
Configuration Menu Overview 47
All factory default values are shown in bold.
COLOR
MODE
Settings COLOR/GRAYSCALE
If COLOR is selected, the pages are printed in full color.
If GRAYSCALE is selected, the pages are printed in black
and white.
BRIGHT-
NESS
Settings -15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be adjusted.
PCL
SETTING
CONTRAST Settings -15%/-10%/-5%/0%/
+5%/+10%/+15%
The contrast of the image can be
adjusted.
IMAGEPRINTING
RGBSOURCE
Settings DEVICE COLOR/sRGB
Specify the color space for
RGB image data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the DownloadManager, they are available
from the list of settings.
RGB
INTENT
Settings VIVID/
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVID is selected, a vividoutput is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 62/254
Configuration Menu Overview 48
RGB
GRAY
Settings COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,black is reproduced using only
black.
HALF
TONE
Settings LINE ART/
DETAIL/SMOOTH
Select how halftones are
reproduced.
If LINE ART is selected,
halftones are reproduced withhigh precision.
If DETAIL is selected,
halftones are reproduced with
detail.
If SMOOTH is selected,
halftones are reproduced with
smoothness.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 63/254
Configuration Menu Overview 49
TEXT
PRINTING
RGB
SOURCE
Settings DEVICE COLOR/
sRGB
Specify the color space for
RGB text data.
If DEVICE COLOR is
selected, no color space isspecified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
RGB
INTENT
Settings VIVID/
PHOTOGRAPHIC
Specify the characteristicapplied when converting RGB
text data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
RGBGRAY
Settings COMPOSITEBLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB text
data.
If COMPOSITE BLACK is
selected, black is reproducedusing the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 64/254
Configuration Menu Overview 50
HALF-
TONE
Settings LINE ART/
DETAIL/SMOOTH
Select how halftones are
reproduced.
If LINE ART is selected,
halftones are reproduced withhigh precision.
If DETAIL is selected,
halftones are reproduced with
detail.
If SMOOTH is selected,
halftones are reproduced with
smoothness.
GRAPHICSPRINTING
Settings AS IMAGE/AS TEXT
Specify the color setting for graphics.
If AS IMAGE is selected, the color setting
that is the same as the image is applied.
If AS TEXT is selected, the color setting
that is the same as the text is applied.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 65/254
Configuration Menu Overview 51
PS
SETTINGS
IMAGE
PRINTING
RGB
SOURCE
Settings DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB image data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
RGB
INTENT
Settings VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristicapplied when converting RGB
image data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 66/254
Configuration Menu Overview 52
RGB
GRAY
Settings COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,black is reproduced using only
black.
DESTI-
NATION
PROF
Settings AUTO
Specify the destination profile.
If AUTO is selected, a
destination profile that the
printer automatically adapts is
selected based on acombination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 67/254
Configuration Menu Overview 53
HALF-
TONE
Settings LINE ART/
DETAIL/SMOOTH
Select how halftones are
reproduced.
If LINE ART is selected,
halftones are reproduced withhigh precision.
If DETAIL is selected,
halftones are reproduced with
detail.
If SMOOTH is selected,
halftones are reproduced with
smoothness.
TEXTPRINTING
RGBSOURCE
Settings DEVICE COLOR/sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB text data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 68/254
Configuration Menu Overview 54
RGB
INTENT
Settings VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
text data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
RGB
GRAY
Settings COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB text
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 69/254
Configuration Menu Overview 55
DESTI-
NATION
PROF
Settings AUTO
Specify the destination profile.
If AUTO is selected, a
destination profile that the
printer automatically adapts is
selected based on acombination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
HALF-
TONE
Settings LINE ART/
DETAIL/SMOOTH
Select how halftones are
reproduced.
If LINE ART is selected,
halftones are reproduced with
high precision.
If DETAIL is selected,
halftones are reproduced withdetail.
If SMOOTH is selected,
halftones are reproduced with
smoothness.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 70/254
Configuration Menu Overview 56
GRAPHICS
PRINTING
RGB
SOURCE
Settings DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB image data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
RGB
INTENT
Settings VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristicapplied when converting RGB
image data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 71/254
Configuration Menu Overview 57
RGB
GRAY
Settings COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,black is reproduced using only
black.
DESTI-
NATION
PROF
Settings AUTO
Specify the destination profile.
If AUTO is selected, a
destination profile that the
printer automatically adapts is
selected based on acombination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
HALF-
TONE
Settings AS IMAGE/AS
TEXT
Specify the color setting for
graphics.
If AS IMAGE is selected, the
color setting that is the same
as the image is applied.
If AS TEXT is selected, the
color setting that is the same
as the text is applied.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 72/254
Configuration Menu Overview 58
SIMULATION SIMU-
LATION
PROF
Settings NONE/SWOP/
Euroscale/
CommercialPre
ss/TOYO/DIC
Specify the simulation profile.
If NONE is selected, nosimulation profile is specified.
If simulation profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
SIMU-
LATION
INTENT
Settings RELATIVE
COLOR/
ABSOLUTECOLOR
Specify the characteristic of the
simulation profile.
If RELATIVE COLOR is
selected, relative color is
applied to the simulation
profile.
If ABSOLUTE COLOR isselected, absolute color is
applied to the simulation
profile.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 73/254
Configuration Menu Overview 59
CMYK
GRAY
Settings COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced using the four
CMYK colors.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,black is reproduced using only
black.
CALIBRA-
TION
TONE
CALIBRATION
Settings ON /OFF
If ON is selected, image adjustments are
applied.
If OFF is selected, image adjustments are
not applied.
AIDC
PROCESS
Settings EXECUTE/CANCEL
If EXECUTE is selected, image
adjustments are performed immediately.
If CANCEL is selected, image adjust-
ments are not performed.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 74/254
Configuration Menu Overview 60
CMYK
DENSITY
CYAN/
MAGENTA/
YELLOW/
BLACK
HIGH-
LIGHT
Settings -3/-2/
-1/0/
1/2/3
The density of the
highlight color in
images can be
adjusted.
MIDDLE Settings -3/-2/
-1/0/
1/2/3
The density of the
middle color in
images can be
adjusted.
SHADOW Settings -3/-2/
-1/0/
1/2/3
The density of the
shadow color in
images can be
adjusted.
COLOR
SEPARA-TION
Settings ON/OFF
If ON is selected, color separation are performed. The
contents of a color page is separated into the color pages
for yellow, magenta, cyan and black, and each is printed
with black gradations as individual pages. The printing order
is yellow, magenta, cyan, then black.
If OFF is selected, color separation is not performed. A
normal color separation is performed.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 75/254
Configuration Menu Overview 61
CAMERA DIRECT MENU
This menu item appears when INTERFACE MENU/CAMERA DIRECT is
set to ENABLE.
With this menu, settings for “camera direct” function can be specified.
These settings are overridden by any settings configured within the
digital camera.
For details on camera direct, refer to “Camera Direct” on page 84.
RGB SOURCE
RGB INTENT
RGB GRAY
BRIGHTNESS
CONTRAST
HALFTONE
PAPER SOURCE
LAYOUT
CAMERA DIRECT
PAPER MARGIN
IMAGE QUALITY
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 76/254
Configuration Menu Overview 62
All factory default values are shown in bold.
PAPER
SOURCE
Settings TRAY1/TRAY2/TRAY3/TRAY4/TRAY5
The tray that is used can be specified.
TRAY 3, 4, 5 appear only if the optional lower feeder
units are installed.LAYOUT Settings 1-UP/2-UP/3-UP/4-UP/6-UP/8-UP
Specify the number of images printed on a single sheet of media.
When set to 1-UP, only one image will be printed on a single
sheet of media.
PAPER
MARGIN
Settings STANDARD/MINIMUM
If STANDARD is selected, the standard media margin size is
specified.
If MINIMUM is selected, the minimum media margin size is
specified.
IMAGE
QUAL-
ITY
BRIGHT-
NESS
Settings -15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be
adjusted.
CONTRAST Settings -15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the image can be adjusted.
RGB
SOURCE
Settings DEVICE COLOR/sRGB
Specify the color space for RGB image data.
If DEVICE COLOR is selected, no color space is
specified.
RGB
INTENT
Settings VIVID/PHOTOGRAPHIC
Specify the characteristic applied when convertingRGB image data to CMYK data.
If VIVID is selected, a vivid output is produced.
If PHOTOGRAPHIC is selected, a brighter output is
produced.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 77/254
Configuration Menu Overview 63
RGB GRAY Settings COMPOSITE BLACK/BLACK AND
GRAY/BLACK ONLY
Specify how black and grays are reproduced in
RGB image data.
If COMPOSITE BLACK is selected, black is
reproduced using the CMYK colors.
If BLACK AND GRAY is selected, black and gray
are reproduced using black only.
If BLACK ONLY is selected, black is reproduced
using only black.
HALFTONE Settings LINE ART/DETAIL/SMOOTH
Select how halftones are reproduced.
If LINE ART is selected, halftones are reproducedwith high precision.
If DETAIL is selected, halftones are reproduced
with detail.
If SMOOTH is selected, halftones are reproduced
with smoothness.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 78/254
Configuration Menu Overview 64
INTERFACE MENU
With this menu, interface settings can be specified.
Restart the printer after changing settings in the ETHERNET menu.
SUBNET MASK
DEFAULT GATEWAY
DHCP/BOOTP
ENABLE
ENABLE
TCP/IP ENABLE
IP ADDRESS
NETWARE
APPLETALK
SPEED/DUPLEX
JOB TIMEOUT
ETHERNET
INTERFACE MENU
CAMERA DIRECT
TELNET
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 79/254
Configuration Menu Overview 65
All factory default values are shown in bold.
JOB
TIME-
OUT
Settings 5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NET
TCP/IP ENABLE Settings YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IP
ADDRESS
Setting 000.000.000.000
Set the IP address for this printer on the
network.
Use the Up, Down, Left, and Right keys
to specify the value.
If the IP address is manually specified,
DHCP/BOOTP is automatically set to
OFF.
SUBNET
MASK
Setting 255.255.000.000
Specify the subnet mask for the network.
Use the Up, Down, Left, and Right keys
to specify the value.
DEFAULT
GATEWAY
Setting 000.000.000.000
Specify the IP address of the router if one
is on the network. Use the Up, Down,
Left, and Right keys to specify the value.
DHCP/
BOOTP
Settings ON /OFF
Select whether or not the IP address is
automatically acquired.
If ON is selected, the IP address is auto-
matically acquired.If OFF is selected, the IP address is not
automatically acquired.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 80/254
Configuration Menu Overview 66
TELNET Settings ENABLE/DISABLE
Select whether to enable or disable
Telnet transmissions.
When ENABLE is selected, Telnet
transmissions are enabled.
When DISABLE is selected, Telnet
transmissions are disabled.
NETWARE ENABLE Settings YES/NO
If YES is selected, NetWare is enabled.
If NO is selected, NetWare is disabled.
APPLE
TALK
ENABLE Settings YES/NO
If YES is selected, AppleTalk is enabled.
If NO is selected, AppleTalk is disabled.
SPEED/
DUPLEX
Settings AUTO/10BASE FULL/10BASE
HALF/100BASE FULL/100BASE
HALF/1000BASE FULL
Specify the transmission speed for the network and
the transmission method for bi-directional
transmission.
CAMERADIRECT
Settings ENABLE/DISABLE
Select whether to enable or disable camera direct printing.
If ENABLE is selected, camera direct printing is enabled.
If DISABLE is selected, camera direct printing is disabled.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 81/254
Configuration Menu Overview 67
SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer,
such as the display language of the message window and the time until the
machine enters Energy Saver mode.
LANGUAGE
EMULATION DEF.
EMULATION
POSTSCRIPT WAIT
TIMEOUT
PS ERROR
PAGE
PS PROTOCOL
PCL CR/LF
MAPPING
LINES PER
PAGE
FONT SOURCE FONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPER DEFAULT
PAPER
DETECT PAPER
SIZE
UNIT OF
MEASURE
SYS DEFAULT MENU
PAPER SIZE
CUSTOM SIZE
PAPER TYPE
STARTUP
OPTIONS
DO STARTUP
PAGE
AUTO
CONTINUE
HOLD JOBTIMEOUT*
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 82/254
Configuration Menu Overview 68
LCD
BRIGHTNESS
SECURITY CHANGE
PASSWORD
LOCK PANEL
CLOCK DATE
(xx.xx.xx)
TIME
HDD FORMAT* USER AREA
ONLY
ALL
RESTORE
DEFAULTS
RESTORE
NETWORK
RESTORE
PRINTER
RESTORE ALL
ENABLE
WARNING
PAPER EMPTY TRAY1
IMAGING UNIT
LIFE TRAY2
TRAY3****
TRAY4****
ENERGY
SAVER TIME**
MENU
TIMEOUT
ENERGY
SAVER
CARD FOR-
MAT***
TRAY5****
TONER LOW
I-UNIT LOW
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 83/254
Configuration Menu Overview 69
* These menu items appear only if an optional hard disk is installed.
** This menu item appears when you select except OFF from the
ENERGY SAVER menu.
***This menu item appears only if an optional CompactFlash card is
installed.
****These menu items appear only if corresponding optional lower
feeder unit is installed.
All factory default values are shown in bold.
LAN-
GUAGE
Settings ENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH
The display language of the message window can be changed
to the selected language.
The language selections appear in the message window in the
corresponding language. For example, GERMAN appears as
DEUTSCH.
EMULA-
TION
DEF.
EMULA-
TION
Settings AUTO/POSTSCRIPT/PCL
Specify the printer emulation language.
If AUTO is selected, the printer automatically selects
the printer emulation language from the data
stream.POST-
SCRIPT
WAIT
TIME
OUT
Settings 0-300
Specify the time until an error is
determined to be a PostScript error.
If 0 is selected, no timeout is performed.
PS
ERROR
PAGE
Settings ON/OFF
Select whether or not an error page is
printed when a Postscript error occurs.
PS
PROTO-
COL
Settings AUTO/NORMAL/BINARY
Specify the protocol for data
transmissions with a PostScript data
stream.
If AUTO is selected, the printer
automatically selects an applicable
protocol from the data stream.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 84/254
Configuration Menu Overview 70
PCL CR/LF
MAP-
PING
Settings CR=CR LF=LF/CR=CRLF
LF=LF/CR=CR
LF=LFCR/CR=CRLF
LF=LFCR
Select the definitions of the CR/LF codes
in the PCL language.
LINES
PER
PAGE
Settings 5-60-128
Specify the number of lines per page in
the PCL language.
FONT
SOURCE
FONT
NUMBER
Settings 0-102
Specify the default font in the
PCL language.
The font numbers that appear
correspond to the PCL fontlist. For details on printing the
font list, refer to “PRINT
MENU” on page 36.
PITCH
SIZE
(POINT
SIZE)
Settings 0.44-10.00-
99.99
(4.00-12.00-
999.75)
Specify the font size in thePCL language.
If the selected FONT NUMBER
is for a bitmap font, PITCH
SIZE appears. If the selected
FONT NUMBER is for an
outline font, POINT SIZE
appears.
SYMBOLSET
Specify the symbol set usedwith the PCL language.
The default setting is PC8.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 85/254
Configuration Menu Overview 71
PAPER DEFAULT
PAPER
PAPER
SIZE
Settings LETTER/11x17/LEGAL/
EXECUTIVE/A3WIDE/A3/
A4/A5/A6/B4(JIS)/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/12x18/
11x14/4x6/D8K/KAI 8/
KAI 16/KAI 32/ENV
C5/ENV C6/ENV DL/ENV
MONARCH/ENV CHOU#3/
ENV CHOU#4/B5(ISO)/
ENV #10/ENV YOU#4/
JPOST/JPOST-D/CUSTOMSelect the size of media that is normally
used.
The default setting for North
America is LETTER. The default
setting for all other regions is A4.
CUSTOM
SIZE
Specify the media size when PAPER
SIZE is set to CUSTOM.
The setting units can be switched
between millimeters and inches with the
UNIT OF MEASURE setting.
Setting range for WIDTH
For MILLIMETERS: 90 to 311 mm
(The default is 210.)
For INCHES: 3.55 to 12.25 in.
(The default is 8.50.)
Setting range for LENGTH
For MILLIMETERS: 140 to457 mm
(The default is 297.)
For INCHES: 5.50 to 18.00 (The
default is 11.00.)
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 86/254
Configuration Menu Overview 72
PAPER
TYPE
Settings PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
TRANSPARENCY 2/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY
Select the type of media that is normally
used.
DETECT
PAPER
SIZE
Settings INCHE SIZE/MILLIMETER SIZE
Specify the detection reference for automatically
detecting the media size.
If INCH SIZE is selected, the media size will be
detected based on inch sizes.Tray 2:
LETTER/LETTER-R/11x17/LEGAL/EXECUTIVE/
STATEMENT/A3WIDE
Trays 3/4/5:LETTER/LETTER-R/11x17/LEGAL/A3/A4/A4-R/
B4(JIS)/B5(JIS)/B5(JIS)-R/STATEMENT/GOVT
LEGAL/16K/11x14/D8K
If MILLIMETER SIZE is selected, the media size
will be detected based on millimeter sizes.Tray 2:
A3WIDE/A3/A4/A4-R/A5/A6/B4(JIS)/B5(JIS)/
B5(JIS)-R/B6(JIS)
Trays 3/4/5:LETTER/LETTER-R/11x17/LEGAL/A3/A4/A4-R/A5/
B4(JIS)/B5(JIS)/B5(JIS)-R/GOVT LEGAL/16K/11x14/
D8K
UNIT
OFMEA-
SURE
Settings INCHES/ MILLIMETERS
The units for specifying the size of custom mediacan be switched between inches and millimeters.
The default setting for North America is
INCHES . The default setting for all other
regions is MILLIMETERS .
STARTUP
OPTIONS
DO
START-
UP
PAGE
Settings ON/OFF
Select whether or not a startup page is printed when
the printer is turned on.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 87/254
Configuration Menu Overview 73
AUTO
CON-
TINUE
Settings ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If AUTO CONTINUE is set to ON, printing automatically con-
tinues after about 10 seconds under the following conditions. At this time, printing will be performed even if the media size is
different.
No media: PAPER EMPTY (Page 196)/TRAY EMPTY (Page
198)
Different media size/type: PAPER ERROR (Page 196)/TRAY x
PAPER ERR (Page 198)
HOLD
JOB
TIME
OUT
Settings DISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If DISABLE is selected, print jobs are not deleted
at a specific time.
ENERGY
SAVER
Settings DEEP SLEEP/LIGHT SLEEP/OFF
If DEEP SLEEP was selected and the printer entered Energy
Saver mode, no operation is available other than that to exit
Energy Saver mode. However, if the printer receives print data
or a control panel key is pressed, the printer will automatically
exit Energy Saver mode and begin operating.
If LIGHT SLEEP was selected, the configuration menu can
be used even if the printer has entered Energy Saver mode. In
addition, if the printer receives print data, the printer begins
operating immediately.
If OFF is selected, the machine will not enter Energy Saver
mode.
ENERGY
SAVER
TIME
Settings 15 minutes/30 minutes/1 hour/
3 hours
Specify the length of time until the machine enters Energy
Saver mode.
This menu item appears only when ENERGY SAVER is set to
ON.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 88/254
Configuration Menu Overview 74
MENU
TIME
OUT
Settings OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If OFF is selected, no
timeout occurs.
LCDBRIGHT
NESS
Settings -3/-2/-1/0/+1/+2/+3 Adjust the brightness of the message window.
The darkest level setting is -3 and the brightest level setting is
+3.
SECU-
RITY
CHANGE
PASS-
WORD
Specify the password for locking the control panel.
If the password is set to 0000 (default), the control
panel is not locked. In order to lock the control
panel, be sure to specify a password other than
0000.
LOCK
PANEL
Settings OFF/MINIMUM/ON
Specify how the control panel is locked.
If OFF is selected, the control panel is not locked.
If MINIMUM is selected, the INTERFACE MENU
and SYS DEFAULT MENU are protected with a
password.
If ON is selected, all menus are protected with a
password.
In order to lock the control panel, be sure to specify
a password other than 0000.
CLOCK DATE
(xx.xx.
xx)
Specify the date for the printer's internal clock.
The date for Asia and China is set in the order year,
month, then day (YY.MM.DD).
The date for the Americas is set in the order month,
day, then year (MM.DD.YY).
The date for Europe is set in the order day, month,
then year (DD.MM.YY).
TIME Specify the time for the printer's internal clock.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 89/254
Configuration Menu Overview 75
HDD
FORMAT
USER
AREA
ONLY
Initialize the user area of the hard disk. When this
menu item is selected, the printer is automatically
restarted.
ALL Initialize the hard disk. When this menu item is
selected, the printer is automatically restarted.
CARDFORMAT
Initialize the card. When this menu is selected, theprinter is automatically restarted.
RESTORE
DEFAULTS
RESTORE
NETWORK
Reset the network settings to their defaults. When
this menu item is selected, the printer is
automatically restarted.
RESTORE
PRINTER
Reset the printer settings to their defaults. When
this menu item is selected, the printer is
automatically restarted.
RESTORE
ALL
Reset all settings to their defaults. When this menu
item is selected, the printer is automatically
restarted.
ENABLE
WARNING
PAPER
EMPTY
TRAY1 Settings ON/OFF
Select whether or not a warning appears
when Tray 1 runs out of media.
TRAY2 Settings ON /OFF
Select whether or not a warning appears
when Tray 2 runs out of media.TRAY3 Settings ON /OFF
Select whether or not a warning appears
when Tray 3 runs out of media.
TRAY4 Settings ON /OFF
Select whether or not a warning appears
when Tray 4 runs out of media.
TRAY5 Settings ON /OFF
Select whether or not a warning appears
when Tray 5 runs out of media.
TONER
LOW
Settings ON /OFF
Select whether or not a warning appears when the
toner is about to run out.
I-UNIT
LOW
Settings ON /OFF
Select whether or not a warning appears when the
imaging unit is about to reach the end of its servicelife.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 90/254
Configuration Menu Overview 76
IMAG-
ING
UNIT
LIFE
Settings STOP/CONTINUE
If STOP is selected, printing stops when the end of the service
life for the imaging unit is detected.
If CONTINUE is selected, printing continues even if the end of
the service life for the imaging unit is detected.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 91/254
Configuration Menu Overview 77
MAINTENANCE MENU
With this menu, maintenance on this printer can be performed.
In order to use this menu, the administrator password must be entered.
ALIGNMENT TOP
ADJUSTMENT
PLAIN PAPER
THICK 1/2/3
TRANSFER
POWER
SIMPLEX PASS
MAINTENANCE MENU
PRINT MENU EVENT LOG
HALFTONE 64 CYAN/MAGENTA/
YELLOW/BLACK 64
CYAN/MAGENTA/
YELLOW/BLACK 128
CYAN/MAGENTA/
YELLOW/BLACK 256
HALFTONE 128
HALFTONE 256
GRADATION
ENVELOPE
TRANSPARENCY
LEFT
ADJUSTMENT
LEFT ADJ
TRAY 1-5
LEFT
ADJ DUPLEX
LEFT ADJ
TRAY 1-5
PLAIN PAPER
TRANSPAR-
ENCY 1/2
THICK 1/2/3
ENVELOPE
POSTCARD
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 92/254
Configuration Menu Overview 78
All factory default values are shown in bold.
MENU
EVENT
LOG
Settings PRINT/CANCEL
Prints the event log.
HALF-
TONE64
CYAN/
MAGENTA/
YELLOW/
BLACK
64
Settings PRINT/CANCEL
Print cyan/magenta/yellow/black half-
tones at 64 gradations.
HALF-
TONE
128
CYAN/
MAGENTA/
YELLOW/
BLACK
128
Settings PRINT/CANCEL
Print cyan/magenta/yellow/black half-
tones at 128 gradations.
HALF-
TONE
256
CYAN/
MAGENTA/
YELLOW/
BLACK
256
Settings PRINT/CANCEL
Print cyan/magenta/yellow/black half-
tones at 256 gradations.
GRADA-
TION
Settings PRINT/CANCEL
Prints the gradation.
IMG ADJ
THICK
CYAN
MAGENTA
DUPLEX PASS
YELLOW
BLACK
PLAIN PAPER
THICK 1/2/3
ENVELOPE
POSTCARD
FUSER LOOP
ADJ
IMG ADJ
BLACK
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 93/254
Configuration Menu Overview 79
ALIGN-
MENT
TOP
ADJUST
MENT
PLAIN
PAPER
Settings -30-0-30
When printing on plain paper, specify the
size of the top margin.
THICK
1
Settings -30-0-30
When printing on thick paper 1, specify
the size of the top margin.
THICK
2
Settings -30-0-30
When printing on thick paper 2, specify
the size of the top margin.
THICK
3
Settings -30-0-30
When printing on thick paper 3, specify
the size of the top margin.
ENVE-LOPE
Settings-30-
0-30
When printing on envelope, specify the
size of the top margin.
TRANS-
PARENCY
Settings -30-0-30
When printing on transparency, specify
the size of the top margin.
LEFT
ADJUST
MENT
LEFT
ADJ
TRAY1
Settings -30-0-30
When printing on media in Tray 1, specify
the size of the left margin.
LEFT
ADJ
TRAY2
Settings -30-0-30
When printing on media in Tray 2, specify
the size of the left margin.
LEFT
ADJ
TRAY3
Settings -30-0-30
When printing on media in Tray 3, specify
the size of the left margin.
LEFTADJ
TRAY4
Settings -30-0-30
When printing on media in Tray 4, specify
the size of the left margin.
LEFT
ADJ
TRAY5
Settings -30-0-30
When printing on media in Tray 5, specify
the size of the left margin.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 94/254
Configuration Menu Overview 80
LEFT
ADJ
DUPLEX
LEFT
ADJ
TRAY1
Settings -30-0-30
When duplex printing on media in Tray 1,
specify the size of the left margin.
LEFT
ADJ
TRAY2
Settings -30-0-30
When duplex printing on media in Tray 2,
specify the size of the left margin.
LEFT
ADJ
TRAY3
Settings -30-0-30
When duplex printing on media in Tray 3,
specify the size of the left margin.
LEFT
ADJ
TRAY4
Settings -30-0-30
When duplex printing on media in Tray 4,
specify the size of the left margin.
LEFTADJ
TRAY5
Settings-30-
0-30
When duplex printing on media in Tray 5,
specify the size of the left margin.
TRANS-
FER
POWER
SIM-
PLEX
PASS
PLAIN
PAPER
Settings -5-0-5
When printing on plain paper
using simplex pass, correct
the secondary image transfer
current.
TRANS-PARENCY
Settings -5-0-5When printing on transparency
using simplex pass, correct
the secondary image transfer
current.
TRANS-
PARENCY
2
Settings -5-0-5
When printing on transparency
2 using simplex pass, correct
the secondary image transfer
current.
THICK
1
Settings -5-0-5
When printing on thick 1 using
simplex pass, correct the sec-
ondary image transfer current.
THICK
2
Settings -5-0-5
When printing on thick 2 using
simplex pass, correct the sec-
ondary image transfer current.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 95/254
Configuration Menu Overview 81
THICK
3
Settings -5-0-5
When printing on thick 3 using
simplex pass, correct the sec-
ondary image transfer current.
POST-
CARD
Settings -5-0-5
When printing on postcardusing simplex pass, correct
the secondary image transfer
current.
ENVELO
PE
Settings -5-0-5
When printing on envelope
using simplex pass, correct
the secondary image transfer
current.
DUPLEX
PASS
PLAIN
PAPER
Settings -30-0-30
When printing on plain paper
using duplex pass, correct the
secondary image transfer cur-
rent.
THICK
1
Settings -30-0-30
When printing on thick 1 using
duplex pass, correct the sec-
ondary image transfer current.
THICK
2
Settings -30-0-30
When printing on thick 2 using
duplex pass, correct the sec-
ondary image transfer current.
THICK
3
Settings -30-0-30
When printing on thick 3 using
duplex pass, correct the sec-ondary image transfer current.
POST-
CARD
Settings -30-0-30
When printing on postcard
using duplex pass, correct the
secondary image transfer cur-
rent.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 96/254
Configuration Menu Overview 82
SERVICE MENU
With this menu, the service representative can adjust the printer and perform
maintenance operations. This menu cannot be used by the user.
ENVE-
LOPE
Settings -30-0-30
When printing on envelope
using duplex pass, correct the
secondary image transfer cur-
rent.
IMGADJ
THICK
CYAN Settings -5-0-5
When printing on thick paper, adjust the
cyan in the image.
MAGENTA Settings -5-0-5
When printing on thick paper, adjust the
magenta in the image.
YELLOW Settings -5-0-5
When printing on thick paper, adjust the
yellow in the image.
BLACK Settings -5-0-5
When printing on thick paper, adjust the
black in the image.
IMG
ADJ
BLACK
Settings -2-0-2
When printing in grayscale, adjust the black in the
image.
FUSERLOOP
ADJ
Settings -2-0-2 Adjust the timing of media transfer to the fusing
roller so that envelopes do not wrinkle when they
are printed.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 97/254
Camera Direct
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 98/254
Camera Direct 84
Camera Direct
If a digital camera with PictBridge (1.0 or later) is connected to the printer
through the Camera Direct Print port, images stored on the digital camera can
be printed directly from the printer.
For details on using the digital camera, refer to your digital cameras
manual.
The following features are not supported with Camera Direct.
- DPOF AUTOPRINT image print
- Cropping print
- Borderless
- Print quality (printer setup)
- Paper type (printer setup)
- DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1 From the printer’s Camera Direct Menu, specify settings for Paper
Source, Layout, Paper Margin and Image Quality.
The Media Type setting that is used is the default printer setting
that is selected.
The Media Type setting cannot be selected from the digital cam-
era.
If these settings can be specified from the digital camera, they do
not need to be specified from the control panel. These settings are
overridden by settings configured within the digital camera.
For details on control panel settings, refer to “CAMERA DIRECT
MENU” on page 61.
2 Connect the USB cable to the
digital camera and to the camera
direct port.
A USB cable is not
included with the printer
and must be purchased
separately, if not supplied
with your digital camera.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 99/254
Camera Direct 85
3 From the digital camera, specify the image that you wish to print and the
desired number of copies.
4 Start printing from the digital camera.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 100/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 101/254
Using Media
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 102/254
Media Specifications88
Media Specifications
What types and sizes of media can I load?
For custom sizes, use the printer driver to specify the settings within
the ranges shown in the above table.
MediaMedia Size Media Feed
Direction*Inch Millimeter
D8K 10.6 x 15.4 270.0 x 390.0 SEF
11x14 11.0 x 14.0 279.4 x 355.6 SEF4x6 4.0 x 6.0 101.6 x 152.4 SEF
A6 4.1 x 5.8 105.0 x 148.0 SEF
B6(JIS) 5.0 x 7.2 128.0 x 182.0 SEF
12x18 12.0 x 18.0 304.8 x 457.2 SEF
KAI 8 10.2 x 14.6 260.0 x 370.0 SEF
A3WIDE 12.3 x 18.0 311.2 x 457.2 SEF
A3 11.7 x 16.5 297.0 x 420.0 SEF
11x17 11.7 x 17.0 297.4 x 431.8 SEF
B4(JIS) 10.1 x 14.3 257.0 x 364.0 SEF
LETTER 11.0 x 8.5 279.4 x 215.9 LEF/SEF
SP FOLIO 8.5 x 12.7 215.9 x 322.3 SEF
GOVT LETTER 8.0 x 10.5 203.2 x 266.7 SEF
LEGAL 8.5 x 14.0 215.9 x 355.6 SEF
GOVT LEGAL 8.5 x 13.0 215.9 x 330.2 SEF
EXECUTIVE 7.3 x 10.5 184.2 x 266.7 SEF
STATEMENT 5.5 x 8.5 139.7 x 215.9 SEF
16K 10.6 x 7.7 270.0 x 195.0 LEF
UK QUARTO 8.0 x 10.0 203.2 x 254.0 SEF
FOOLSCAP 8.0 x 13.0 203.2 x 330.2 SEF
FOLIO 8.3 x 13.0 210.0 x 330.0 SEF
A4 11.7 x 8.3 297.0 x 210.0 LEF/SEF A5 5.8 x 8.3 148.0 x 210.0 SEF
B5(JIS) 10.1 x 7.2 257.0 x 182.0 LEF/SEF
JPOST 3.9 x 5.8 100.0 x 148.0 SEF
JPOST-D 5.8 x 7.9 148.0 x 200.0 SEF
B5(ISO) 6.9 x 9.8 176.0 x 250.0 SEF
ENV #10 4.1 x 9.5 104.7 x 241.3 SEF
ENV MONARCH 3.9 x 7.5 98.4 x 190.5 SEF
ENV DL 4.3 x 8.7 110.0 x 220.0 SEF
ENV C5 6.4 x 9.0 162.0 x 229.0 SEF
ENV C6 4.5 x 6.4 114.0 x 162.0 SEFENV CHOU#3 4.7 x 9.3 120.0 x 235.0 SEF
ENV CHOU#4 3.5 x 8.1 90.0 x 205.0 SEF
ENV YOU#4 4.1 x 9.3 105.0 x 235.0 SEF
KAI 16 7.3 x 10.2 185.0 x 260.0 SEF
KAI 32 5.1 x 7.3 130.0 x 185.0 SEF
CUSTOM (Tray1) 3.55 x 5.50 to 12.25 x 47.24 90 x 140 to 311 x 1200 SEF
CUSTOM (Tray2) 3.55 x 5.50 to 12.25 x 18.00 90 x 140 to 311 x 457 SEF
Notes: * LEF=Long Edge Feed, SEF=Short Edge Feed
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 103/254
Media Types 89
Media Types
Before purchasing a large quantity of special media, do a trial print
with the same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Use media that is
Suitable for plain paper laser printers, such as standard or recycled office
paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use media that is
Coated with a processed surface (such as carbon paper, digitally gloss-
coated media, and colored paper that has been treated)
Carbon backed
Capacity Tray 1
(Manual Feed
Tray)
Up to 100 sheets, depending on the paper
weight.
Tray 2 Up to 250 sheets, depending on the paper
weight.
Tray 3/4/5 Up to 500 sheets, depending on the paperweight.
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 Face up
Driver
Media Type
Plain Paper (Recycled)
Weight 64–90 g/m² (17–24 lb bond)Duplexing Supported sizes:
A3Wide, A3, Ledger, 11x14, B4, A4, A4-R, A5, B5, B5-R,
D8K, 12x18, Executive, Government Letter, Letter, Letter-R,
Folio, Government Legal, Legal, Statement, UK Quarto,
Foolscap, SP Folio, 16K, Kai 8, Kai 16
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 104/254
Media Types90
Unapproved iron-on transfer media (such as heat-sensitive paper,
heat-pressure paper, and heat-press transfer paper)
Cold-water-transfer paper
Pressure sensitive
Designed specifically for inkjet printers (such as superfine paper, glossy
paper, glossy film, and postcards)
Already printed on by another printer, copier, or fax machine
Dusty
Wet (or damp)
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
Layered
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn
Too slick, too coarse, or too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 105/254
Media Types 91
Thick Stock
Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Banner Paper
Weight: 127-160g/m2
Width: 210-297mm
Length: 458-1200mm
Capacity Tray 1
(Manual Feed
Tray)
Up to 10 thick stock sheets, depending on
their thickness.
Tray 2 Up to 50(Thick 1,2)/10(Thick 3) thick stock
sheets, depending on their thickness.
Tray 3/4/5 Not supported
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —
Driver
Media TypeThick 1 (91-150 g/m2)
Thick 2 (151-210 g/m2)
Thick 3 (211-256 g/m2)
Weight 91–256 g/m² (17–43 lb bond)
Duplexing See page 89 for supported sizes.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 106/254
Media Types92
DO NOT use thick stock that is
Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist ofthree layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Use envelopes that are
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Approved for laser printing
Dry
DO NOT use envelopes that have
Sticky flaps
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
Transparent windows
Capacity Tray 1
(Manual Feed
Tray)
Up to 10 envelopes, depending on their
thickness
Tray 2 Up to 10 envelopes, depending on their
thickness
Tray 3/4/5 Not supportedOrientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —
Driver
Media Type
Envelope
Weight 64–163 g/m² (17–43 lb bond)
Duplexing Not supported
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 107/254
Media Types 93
Too rough of a surface
Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
Been presealed
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 108/254
Media Types94
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
The face sheet must follow the plain paper specification.
The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Use label sheets that are
Recommended for laser printers
DO NOT use label sheets that
Have labels that easily peel off or have parts of the label already removed
Have backing sheets that have peeled away or have exposed adhesive
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
Capacity Tray 1
(Manual Feed
Tray)
Up to 10 label sheets, depending on their
thickness
Tray 2 Up to 50 label sheets, depending on their
thickness
Tray 3/4/5 Not supported
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —Driver
Media Type
Label
Weight 64–163 g/m² (17–90 lb)
Duplexing Not supported
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 109/254
Media Types 95
Are precut or perforated
Letterhead
Try printing your data on a sheet of plain paper first to check placement.
Postcards
Try printing your data on a sheet of plain paper first to check placement.
Capacity Tray 1
(Manual Feed
Tray)
Up to 10 sheets, depending on their size and
thickness
Tray 2 Up to 50 sheets, depending on their size and
thickness
Tray 3/4/5 Not supported
Orientation Tray 1
(Manual FeedTray)
Face down
Tray 2 Face up
Tray 3/4/5 —
Driver
Media Type
Letterhead
Weight 64–90 g/m² (17–24 lb)
Duplexing Not supported
Capacity Tray 1
(Manual Feed
Tray)
Up to 10 postcards, depending on their
thickness
Tray 2 Up to 50 postcards, depending on their
thickness
Tray 3/4/5 Not supported
Full-page labels(uncut)
Do not use OK to use
Shiny backed paper
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 110/254
Media Types96
Use postcards that are
Approved for laser printers
DO NOT use postcards that are
Coated
Designed for inkjet printers
Precut or perforated
Preprinted or multicolored
If the postcard is warped, press on the warped
area before putting it in Tray 1/2.
Transparencies
Do not fan transparencies before loading them. Resulting static elec-
tricity may cause printing errors.
If you touch the face of the transparencies with your bare hands, print
quality may be affected.
Keep the printer path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 8, “Maintaining the Printer” .
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing envi-
ronment.
Try printing your data on a sheet of plain paper first to check placement.
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —
Driver
Media Type
Postcard
Weight 64–163 g/m² (17–90 lb)
Duplexing Not supported
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 111/254
Media Types 97
If you have problems feeding 20 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, thus causing feeding problems.
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
Approved for laser printing
DO NOT use transparencies that
Have static electricity that will cause them to stick together
Are specified for inkjet printers only
Glossy Stock
Test all glossy stock to ensure acceptable performance and to ensure that the
image does not shift.
Capacity Tray 1
(Manual Feed
Tray)
Up to 10 transparencies, depending on their
thickness
Tray 2 Up to 50 transparencies, depending on their
thickness
Tray 3/4/5 Not supported
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —
DriverMedia Type
Transparency, Transparency2
Transparency2 is a suitable setting for CG3700 of 3M.
Duplexing Not supported
Capacity Tray 1
(Manual Feed
Tray)
Up to 10 glossy stock sheets, depending on
their thickness.
Tray 2 Up to 10 glossy stock sheets, depending on
their thickness.
Tray 3/4/5 Not supported
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 112/254
Media Types98
DO NOT use glossy stock that is
Mixed with any other media in Tray 1/2 (as this will cause printer misfeed-
ing)
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —
Driver
Media Type
Glossy
Weight 64–90 g/m² (17–24 lb)
Duplexing Not supported
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 113/254
Media Types 99
What Is the Guaranteed Imageable (Printable) Area?
The printable area on all media sizes is
excluding 4mm (0.157") section from the
right/left edge and 4.2mm (0.165") sec-
tion from Top/Bottom edge of the media.
Each media size has a specific imagea-ble area, the maximum area on which
the printer can print clearly and without
distortion.
This area is subject to both hardware
limits (the physical media size and the
margins required by the printer) and
software constraints (the amount of memory available for the full-page frame
buffer). The guaranteed imageable (printable) area for all media sizes is the
page size minus 4 mm (0.157") from the right/left edge and 4.2 mm (0.165")
from the top/bottom edge of the media.
In case of A3Wide, printable area is excluding 2 mm (0.079") section
from the each edge of the each paper.
Imageable Area—Envelopes
Envelopes have a nonguaranteed imageable area that varies with envelope
type.
The enve-
lope print
orienta-
tion is
deter-
mined
by your
applica-
tion.
Page Margins
Margins are set through your application. Some applications allow you to set
custom page sizes and margins while others have only standard page sizes
and margins from which to choose. If you choose a standard format, you may
lose part of your image (due to imageable area constraints). If you can cus-
tom-size your page in your application, use those sizes given for the imagea-ble area for optimum results.
a a
b
b
Printable
Area
a = 4 mm (0.157")
b = 4.2 mm (0.165")
Guaranteedarea
Nonguaranteed area
Nonimageable area
a a
b
b
a = 4 mm (0.157")b = 4.2 mm (0.165")
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 114/254
Loading Media100
Loading Media
How do I load media?
Take off the top and bottom sheets of a
ream of media. Holding a stack of
approximately 100 sheets at a time, fan
the stack to prevent static buildup before
inserting it in a tray.
Do not fan transparencies.
Note
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, thick stock, or transparencies) mayadversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
Tray 1 (Manual Feed Tray)
For details on the types and sizes of media that can be printed from Tray 1,
refer to “Media Specifications” on page 88.
Loading Plain Paper
1 Open Tray 1.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 115/254
Loading Media 101
2 Slide the media guides to pro-
vide more space between them.
3 Load the paper face down in the
tray.
Do not load paper above
the line. Up to 100 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 116/254
Loading Media102
4 Slide the media guides against
the edges of the paper.
5 Select PAPER MENU/PAPER SOURCE/TRAY1/PAPER SIZE in the
configuration menu, and then select the setting for the size of paper that isloaded. See also “PAPER SIZE” on page 39.
When printing from Tray 1 with the corresponding Paper Source
setting selected in the printer driver (Manual Feed), it is not neces-
sary to change the configuration menu setting.
Other Media
When loading media other than plain paper, set the media mode (Envelope,
Label, Letterhead, Postcard, Thick 1, Thick 2, Thick 3, or Transparency) inthe driver for optimum print quality.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 117/254
Loading Media 103
Loading Envelopes
1 Pull the lever, and then open the
right side cover.
Before opening the right
side cover, open Tray 1.
2 Push up the top cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 118/254
Loading Media104
3 Push down the left and right
release levers M2 to the
position.
4 Close the top cover.
M2
M2
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 119/254
Loading Media 105
5 Close the right side cover.
6 Open Tray 1.
7 Slide the media guides to pro-
vide more space between them.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 120/254
Loading Media106
8 Load the envelopes in the tray
face down with the flaps toward
the outside of the tray.
Before loading enve-
lopes, press them down
to make sure that all air is
removed, and make surethat the flaps are com-
pletely open and pressed
flat; otherwise the enve-
lopes may become wrin-
kled or a media misfeed
may occur.
Up to 10 envelopes can
be loaded into the tray at one time.
For envelopes with the
flap along the long edge,
load the envelopes with
the flap toward the right
of Tray 1.
9 Slide the media guides against
the edges of the envelopes.
Note
Since a media misfeed or
decreased print quality may
occur, be sure to return the
levers on the fuser unit to the
setting for plain paper before
printing on media other than
envelopes.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 121/254
Loading Media 107
10 Select PAPER MENU/PAPER SOURCE/TRAY1/PAPER TYPE in the
configuration menu, and then select the setting for the type of paper that
is loaded. See also “PAPER TYPE” on page 41.
When printing from Tray 1 with the corresponding Paper Source
setting selected in the printer driver (Manual Feed), it is not neces-
sary to change the configuration menu setting.
Loading Label Sheets/Postcards/Thick Stock/Glossy Stockand Transparencies
1 Open Tray 1.
2 Slide the media guides to pro-
vide more space between them.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 122/254
Loading Media108
3 Load the media face down in the
tray.
Up to 20 sheets can be
loaded into the tray at
one time.
4 Slide the media guides against
the edges of the media.
5 Select PAPER MENU/PAPER SOURCE/TRAY1/PAPER TYPE in the
configuration menu, and then select the setting for the type of media that
is loaded. See also “PAPER TYPE” on page 41.
When printing from Tray 1 with the corresponding Paper Source
setting selected in the printer driver (Manual Feed), it is not neces-
sary to change the configuration menu setting.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 123/254
Loading Media 109
Loading the Banner Paper
Paper up to 1200 mm long can be loaded into the bypass tray and printed
one at a time.
If the optional banner tray is installed, up to 10 sheets can be printed
continuously. For details, refer to “Banner Tray” on page 229.
1 Open Tray 1.
2 Slide the media guides to pro-
vide more space between them.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 124/254
Loading Media110
3 Load the banner paper face
down with the end inserted into
the slot as much as possible.
1 sheet of the banner
paper can be loaded into
the tray at one time.
In order to avoid toner
smudges, do not load
curled paper.
4Slide the media guides against
the edges of the banner paper.
Print while supporting the
loaded paper with your
hands.
When printing multiple
copies on banner paper,
repeat the procedure
starting from step 2.
5 Select PAPER MENU/PAPER SOURCE/TRAY1/CUSTOM SIZE in
the configuration menu, and then select the setting for the size of paper
that is loaded. See also “CUSTOM SIZE” on page 40.
When printing from Tray 1 with the corresponding Paper Sourcesetting selected in the printer driver (Manual Feed), it is not neces-
sary to change the configuration menu setting.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 125/254
Loading Media 111
Tray 2
Loading Media
1 Pull out Tray 2.
2 Press down the media pressureplate to lock it into place.
Note
Do not touch the media feed
roller’s surface. This could
lower image quality.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 126/254
Loading Media112
3 Slide the media guides to pro-
vide more space between them.
To load media of a
non-standard size, first
load the media and then
adjust the media guides
to the size of the loadedmedia.
4 For media exceeding A3 size,
adjust the guides as shown in
the illustration.
5 Load the media face up in the
tray.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 127/254
Loading Media 113
Do not load above the
mark. Up to 250 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
A maximum of 50 sheets
of thick paper, label
sheets, letterhead pages,
postcards, overhead pro-
jector transparencies or
glossy paper can be
loaded.
A maximum of 10 post-
cards can be loaded.
When feeding envelopes with the flap along the shorter edge, load
the envelopes flap side up with the flaps open and toward the leftside of the tray.
When feeding envelopes with the flap along the longer edge, load
the envelopes flap side up with the flaps closed and toward the
back of the tray.
6 Close Tray 2.
7 If TRAY2/SIZE SETTING in the configuration menu is set to USER
SELECT, select TRAY2/PAPER SIZE, and then select the setting for
the size of media that is loaded. See also “PAPER SIZE” on page 41.
8 Select TRAY2/PAPER TYPE in the configuration menu, and then select
the setting for the type of media that is loaded. See also “PAPER TYPE”
on page 42.
If envelopes are loaded, continue with “Printing on Envelopes” on
page 114.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 128/254
Loading Media114
Printing on Envelopes
1 Pull the lever, and then open the
right side cover.
Before opening the right
side cover, open Tray 1.
2 Open the top cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 129/254
Loading Media 115
3 Push down the left and right
release levers M2 to the
position.
4 Close the top cover.
M2
M2
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 130/254
Loading Media116
5 Close the right side cover.
Note
Since a media misfeed or
decreased print quality may
occur, be sure to return the
levers on the fuser unit to the
setting for plain paper before
printing on media other than
envelopes.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 131/254
Loading Media 117
Tray 3/4/5 (Optional Lower Feeder Units)
Loading Plain Paper
1 Pull out Tray 3/4/5.
2 Slide the media guides to pro-
vide more space between them.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 132/254
Loading Media118
3 Load the paper face up in the
tray.
Do not load above the
mark. Up to 500 sheets
(80 g/m2
[22 lb]) of plain paper can be loaded into
the tray at one time.
4 Slide the media guides against
the edges of the paper.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 133/254
Loading Media 119
5 Close Tray 3 (4/5).
6 Select TRAY3 (or TRAY4 or TRAY5) /PAPER TYPE in the configura-
tion menu, and then select the setting for the type of paper that is loaded.
See also “PAPER TYPE” on page 43.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 134/254
Duplexing 120
Duplexing
Select paper with high opacity for duplex (2-sided) printing. Opacity refers to
how effectively paper blocks out what is written on the opposite side of the
page. If the paper has low opacity (high translucency), then the printed data
from one side of the page will show through to the other side. Check your
application for margin information. For best results, print a small quantity tomake sure the opacity is acceptable.
Duplex (2-sided) printing can be done manually or can be done automatically
with the duplex option installed and selected.
Note
Only plain paper, 64–90 g/m2 (17–24 lb bond) and thick paper, 91-256 g/
m2 (25-68.1 lb bond) can be autoduplexed. See “Media Specifications”
on page 88.
Duplexing envelopes, labels, postcards, glossy stock or transparencies
is not supported.
How do I autoduplex?
You should verify that the duplex option is physically installed on the printer to
successfully duplex the job.
Check your application to determine how to set your margins for duplex
printing.
The following Binding Position settings are available.
The binding position settings are supported only PCL printer driver.
If “Short Edge (Top)” is selected, the pages will be laid out
to flip at the top.
If “Short Edge (Bottom)” is selected, the pages will be laid
out to flip at the bottom.
1
3
1
2
1
1
3
12
1
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 135/254
Duplexing 121
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is per-
formed.
The following Order settings are available when “Booklet” is selected.
1 Load plain paper or thick paper into the tray.
2 From the printer driver, specify double-sided printing (Layout tab in Win-
dows).
3 Click OK.
With autoduplexing, the back side is printed first, and then the front
side is printed.
If “Long Edge (Left)” is selected, the pages will be laid out
to flip at the left side.
If “Long Edge (Right)” is selected, the pages will be laid outto flip at the right side.
If “Left Binding” is selected, the pages can be folded as a
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a
right-bound booklet.
111
1
2
3
111
12
3
1
1
2
3
3
31
1
2
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 136/254
Output Tray 122
Output Tray
All printed media is output to the face-down output tray on top of the printer.
This tray has a capacity of approximately 350 sheets (A4/Letter) of 80 g/m2
(22 lb) paper.
If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 137/254
Media Storage 123
Media Storage
How do I store media?
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry uptoo much and cause misfeeding.
If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust.
Avoid leaning media against other objects or placing it in an upright posi-
tion.
Before using stored media, do a trial print to check print quality.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 138/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 139/254
Replacing Consumables
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 140/254
Replacing Consumables126
Replacing Consumables
Note
Failure to follow instructions as outlined in this manual could result in
voiding your warranty.
Note
If an error message (TONER EMPTY, TRANS.BELT END OF LIFE, etc.)
appears, print out the configuration page, and then check the status of the
other consumables. For details on the error messages, refer to “Error
Messages (Warning:)” on page 190. For details on printing the
configuration page, refer to “Printing a Configuration Page” on page 156.
About Toner Cartridges
Your printer uses four toner cartridges: black, yellow, magenta, and cyan.
Handle the toner cartridges carefully to avoid spilling toner inside the printer
or on yourself.
Install only new toner cartridges in your printer. If a used toner car-
tridge is installed, the indicator message will not clear and the supplies
status in the Status Monitor will not be updated.
The toner is nontoxic. If you get toner on your skin, wash it off withcool water and a mild soap. If you get toner on your clothes, lightly
dust them off as best as you can. If some toner remains on your
clothes, use cool, not hot water, to rinse the toner off.
CAUTIONIf you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
Refer to the following URL for recycling information.
US: printer.konicaminolta.com/products/recycle/index.asp
Europe: printer.konicaminolta.com
Note
Do not use refilled toner cartridges or unapproved toner cartridges. Any
damage to the printer or quality problems caused by a refilled toner
cartridge or an unapproved toner cartridge will void your warranty. No
technical support is provided to recover from these problems.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 141/254
Replacing Consumables 127
When replacing a toner cartridge, refer to the following table. For optimum
print quality and performance, use only approved KONICA MINOLTA toner
cartridges for your specific printer type, as listed in the table below. You can
find your printer type and the toner cartridge part numbers on the consum-
ables reorder label inside the front cover your printer.
For optimum print quality and performance, use only the corre-
sponded TYPE genuine KONICA MINOLTA toner cartridges.Keep toner cartridges:
In their packaging until you’re ready to install them.
In a cool, dry location away from sunlight (due to heat).
The maximum storage temperature is 35 ° C (95 ° F) and the maximum
storage humidity is 85% (noncondensing). If the toner cartridge is moved
from a cold place to a warm, humid place, condensation may occur,
degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.
Printer
Type
Printer Parts
Number
Toner Cartridge Type Toner Cartridge
Parts Number
AM 4039321
High-Capacity Toner Cartridge - Black (K) 8938613
High-Capacity Toner Cartridge - Yellow (Y) 8938614
High-Capacity Toner Cartridge - Magenta (M) 8938615
High-Capacity Toner Cartridge - Cyan (C) 8938616
EU4039221
4039421
High-Capacity Toner Cartridge - Black (K) 8938621
High-Capacity Toner Cartridge - Yellow (Y) 8938622
High-Capacity Toner Cartridge - Magenta (M) 8938623
High-Capacity Toner Cartridge - Cyan (C) 8938624
AP 4039222
High-Capacity Toner Cartridge - Black (K) 8938629
High-Capacity Toner Cartridge - Yellow (Y) 8938630
High-Capacity Toner Cartridge - Magenta (M) 8938631
High-Capacity Toner Cartridge - Cyan (C) 8938632
GC 4039223
High-Capacity Toner Cartridge - Black (K) 8938637
High-Capacity Toner Cartridge - Yellow (Y) 8938638
High-Capacity Toner Cartridge - Magenta (M) 8938639
High-Capacity Toner Cartridge - Cyan (C) 8938640
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 142/254
Replacing Consumables128
Level during handling and storage.
Do not hold, stand or store cartridges on their ends or turn them upside
down; the toner inside the cartridges may become caked or unequally
distributed.
Away from salty air and corrosive gases such as aerosols.
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
1 Check the message window to see which color of toner is empty.
2 Remove the air filter from the
printer, and then slide the new
filter into the printer until it snaps
into place.
It is necessary to replace
the air filter only whenreplacing the black toner
cartridge. An air filter is
included with the black
toner cartridge.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 143/254
Replacing Consumables 129
3 Open the printer’s front cover.
4 Pull up the locking tab of the
empty toner cartridge to unlock
it. Pull out the toner cartridge as
far as possible, and then pull it
up to remove it.
Note
Dispose of the used toner cartridge according to your local regulations.
Do not burn the toner cartridge.For details, refer to “About Toner Cartridges” on page 126.
5 Check the color of the new toner cartridge to be installed.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 144/254
Replacing Consumables130
6 Shake the cartridge to distribute
the toner.
7 Align the toner cartridge with the
slots in the machine, and then
insert the cartridge until the lock-ing tab locks into place.
8 Close the front cover.
If the toner cartridge is not fully inserted, the front cover cannot be
closed.
3 ×
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 145/254
Replacing Consumables 131
The printer must complete a 75-second calibration cycle after the
toner cartridge has been replaced. If you open the front cover
before the message READY appears, the printer stops and
repeats the calibration cycle.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 146/254
Replacing Consumables132
Replacing a Imaging Unit
When replacing a imaging unit, refer to the following table. For optimum print
quality and performance, use only approved KONICA MINOLTA imaging units
for your specific printer type, as listed in the table below. You can find your
printer type and the imaging unit part numbers on the consumables reorder
label inside the front cover your printer.
“ I-UNIT ” displayed in the control panel refers to the imaging unit.
Note
Do not touch the OPC drum
surface. This could lower image
quality.
PrinterType
Printer PartsNumber
Imaging Unit Type Imaging UnitParts Number
AM 4039321
Imaging Unit - Black (K) 4062211
Imaging Unit - Yellow (Y) 4062311
Imaging Unit - Magenta (M) 4062411
Imaging Unit - Cyan (C) 4062511
EU4039221
4039421
Imaging Unit - Black (K) 4062213
Imaging Unit - Yellow (Y) 4062313
Imaging Unit - Magenta (M) 4062413
Imaging Unit - Cyan (C) 4062513
AP 4039222
Imaging Unit - Black (K) 4062214
Imaging Unit - Yellow (Y) 4062314
Imaging Unit - Magenta (M) 4062414
Imaging Unit - Cyan (C) 4062514
GC 4039223
Imaging Unit - Black (K) 4062216
Imaging Unit - Yellow (Y) 4062316
Imaging Unit - Magenta (M) 4062416
Imaging Unit - Cyan (C) 4062516
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 147/254
Replacing Consumables 133
If IMAGING UNIT LIFE on the SYS DEFAULT MENU is set to STOP ,
the message I-UNIT LIFE X (where “X ”. represents the color of the
toner) appears when a imaging unit becomes empty. Follow the steps below
to replace the imaging unit.
If IMAGING UNIT LIFE on the SYS DEFAULT MENU menu is
set to CONTINUE , you are advised to replace the indicated imaging
unit when the message I-UNIT END X appears.
1 Check the message window to see which color imaging unit needs replac-
ing.
2 Open the printer’s front cover.
3 Press down the area marked“Push” on the imaging unit to be
replaced, and then slide the unit
all the way out of the printer.
Dispose of the used imaging unit according to your local regula-
tions.
Do not burn the imaging unit.
4 Check the color of the new imaging unit to be installed.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 148/254
Replacing Consumables134
In order to prevent toner from spilling, leave the imaging unit in the
bag until step 5 is being performed.
5 Hold the imaging unit with both
hands, and then shake it twice
as shown in the illustration.
Do not grab the bottom ofthe bag; otherwise, the
imaging unit may be
damaged, resulting in
decreased print quality.
6 Remove the imaging unit from
the bag.
7 Remove the paper wrapped
around the imaging unit.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 149/254
Replacing Consumables 135
8 Remove the mounting bracket
attached with the tape to the bot-
tom of the imaging unit.
9 Remove the cover on the end of
the imaging unit.
10 While supporting the imaging
unit from the bottom, insert it into
the printer. At this time, makesure that the imaging unit is the
same color as the imaging unit
compartment.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 150/254
Replacing Consumables136
11 Grab the handle on top of the
imaging unit, slightly pull it up,
then toward you to remove the
OPC drum cover.
12 Push the imaging unit to
securely insert it so that it snapsinto place.
13 Close the front cover.
If the imaging unit is not
fully inserted, the front
cover cannot be closed.
The printer must com-
plete a 75-second cali-bration cycle after the
toner cartridge has been
replaced. If you open the
front cover before the
message READY
appears, the printer stops
and repeats the calibra-
tion cycle.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 151/254
Replacing Consumables 137
Replacing the Waste Toner Bottle
When the waste toner bottle becomes full, the message WASTE TONER
FULL/REPLACE BOTTLE appears in the message window. The printer
stops and will not start again until the waste toner bottle is replaced.
1 Open the printer’s front cover.
2 Remove the dust filter, and then
insert the new dust filter included
with the waste toner bottle.
3 Push the waste toner releaselever.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 152/254
Replacing Consumables138
4 Slowly slide the waste toner bot-
tle all the way out.
Be careful not to spill any
toner.
5 Dispose of the waste toner bottle.
Note
Dispose of the used waste toner bottle according to your local
regulations. Do not burn the waste toner bottle.
6 Prepare a new waste toner bottle.
7 Slide the waste toner bottle all
the way into the printer.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 153/254
Replacing Consumables 139
8 Close the front cover.
If the waste toner bottle is
not fully inserted, the
front cover cannot be
closed.
Replacing the Backup BatteryIf the backup battery is dead, the printer’s date and time cannot be retained.
Follow the procedure described below to replace the backup battery.
Only CR2032 3V Lithium coin battery can be used.
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 203. In addition,always handle circuit boards by the edges only.
1 Turn off the printer and discon-
nect the power cord and inter-
face cables.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 154/254
Replacing Consumables140
2 Using a coin, remove the screw.
Then, remove the left cover.
3 Remove the backup battery.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 155/254
Replacing Consumables 141
4 Insert a new backup battery.
When inserting the new
backup battery, be sure
that the + side faces
upside.
5 Attach the left cover.
6 Reconnect all interface cables.
7 Reconnect the power cord, and
turn on the printer.
8 Use DATE on the SYS DEFAULT MENU/CLOCK menu to set the date,
and use TIME on the SYS DEFAULT MENU/CLOCK menu to set thetime.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 156/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 157/254
Maintaining thePrinter
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 158/254
Maintaining the Printer 144
Maintaining the Printer
CAUTIONRead all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the inside of
the printer’s covers and the interior of the printer body.
Handle the printer with care to preserve its life. Abuse handling may cause
damage and void your warranty. If dust and paper scraps remain on the
inside or outside of the printer, printer performance and print quality will suffer,
so the printer should be cleaned periodically. Keep the following guidelines in
mind.
WARNING!
Turn off the printer, unplug the power cord, and disconnect all interfacecables before cleaning. Do not spill water or detergent into the printer;
otherwise the printer will be damaged and an electric shock may occur.
CAUTIONThe fuser unit is hot. When the right side cover is opened, the
fuser unit temperature drops gradually (one hour wait time).
Be careful when cleaning the inside of the printer or removing media mis-
feeds, as the fuser unit and other internal parts may be very hot.
Do not place anything on top of the printer.
Use a soft cloth to clean the printer.
Never spray cleaning solutions directly on the printer’s surface; the spray
could penetrate through the air vents of the printer and damage the inter-
nal circuits.
Avoid using abrasive or corrosive solutions or solutions that contain sol-
vents (such as alcohol and benzene) to clean the printer.
Always test any cleaning solution (such as mild detergent) on a small
inconspicuous area of your printer to check the solution’s performance.
Never use sharp or rough implements, such as wire or plastic cleaning
pads.
Always close the printer’s covers gently. Never subject the printer to vibra-
tion.
Do not cover the printer immediately after using it. Turn it off and wait until
it cools down.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 159/254
Maintaining the Printer 145
Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the imaging units.
Do not open the printer during printing.
Do not tap media stacks on the printer.
Do not lubricate or disassemble the printer.
Do not tilt the printer. Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
Make sure two people are avail-
able to lift the printer when mov-
ing it.
Keep the printer level to avoid
toner spillage.
WARNING!Lifting the printer in an awkward position or transporting it in a poorly
balanced position could result in personal injury.
When transporting the printer, assign an adequate number of persons
to the job and ensure that each person can take a good position of not
being excessively loaded. (weight: 59 kg/129.9 lb)
Front
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 160/254
Maintaining the Printer 146
When lifting the printer, fold up
Tray 1, and then lift the printer as
shown in the illustration at the
right.
If an optional lower
feeder unit is installed,
remove it before liftingthe printer.
If you get toner on your skin, wash it off with cool water and a mild soap.
CAUTIONIf you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
Make sure any parts removed during cleaning are replaced before you
plug in the printer.
If the printer is not to be used for
two weeks or more (not turned
on), lower the left and right M2
release levers to the position for
envelopes.
M2
M2
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 161/254
Maintaining the Printer 147
Before using the printer
again, be sure to return
the levers to the position
for normal printing. If
media other than enve-
lopes are printed without
the levers returned to
their normal positions,
decreased print quality
may result.
M2
M2
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 162/254
Cleaning the Printer 148
Cleaning the Printer
CAUTIONBe sure to turn off the printer and unplug the power cord before
cleaning.
Exterior
Control Panel
Printer Exterior
Ventilation Grill
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 163/254
Cleaning the Printer 149
Media Rollers
The accumulation of paper dust and other debris on the media rollers can
cause media-feeding problems.
Cleaning the Media Feed Rollers (Manual Feed Tray)
1 Open Tray 1.
2 Clean the media feed rollers by
wiping them with a soft, dry
cloth.
3 Close the tray.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 164/254
Cleaning the Printer 150
Cleaning the Media Feed Rollers (Tray 2/3/4/5)
1 Pull out the tray.
2 Clean the media feed rollers by
wiping them with a soft, drycloth.
3 Close the tray.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 165/254
Cleaning the Printer 151
Cleaning the Duplex Option Feed Rollers
1 Open the duplex cover.
2 Clean the feed rollers by wiping
them with a soft, dry cloth.
3 Close the duplex cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 166/254
Cleaning the Printer 152
Cleaning the Media Transfer Rollers for Tray 3/4/5
1 Open the right side cover of
Tray 3/4/5.
Before opening the right
side cover of Tray 3/4/5,
fold up Tray 1.
2 Clean the media transfer rollers
by wiping them with a soft, dry
cloth.
3 Close the right side cover of
Tray 3/4/5.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 167/254
Cleaning the Printer 153
Cleaning the Laser Lens
This printer is constructed with four laser lenses. Clean all lenses as
described below. The laser lens cleaning tool should be attached to the inside
of the front cover.
1 Open the printer’s front cover
and remove the cleaning toolfrom the machine's front cover.
2 Insert the laser lens cleaning
tool into the laser lens cleaning
opening, pull it out, and then
repeat this back and forth move-
ment 2 or 3 times.
3 Clean between each of the laser
lenses in the same way.
The laser lens cleaning tool
is included with the printer.
Safely store the laser lens
cleaning tool so that it will not
be lost.
4 Return the laser lens cleaning tool to its holder on the inside of the frontcover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 168/254
Cleaning the Printer 154
5 Close the front cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 169/254
Troubleshooting
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 170/254
Introduction156
Introduction
This chapter provides information to aid you in resolving printer problems you
may encounter, or at least guide you to the proper sources for help.
Printing a Configuration Page
Print a configuration page to verify the printer is printing correctly, or to check
the printer configuration.
Printing the configuration page Page 156
Preventing media misfeeds Page 157Understanding the media path Page 158
Clearing media misfeeds Page 159
Solving problems with media misfeeds Page 175
Solving other problems Page 178
Solving problems with printing quality Page 183
Status, error, and service messages Page 189
Press Key
(once)
Until Display Reads
READYPRINT MENU
If the hard disk is installed, the PROOF/PRINT menu
appears at the top of the menu. Press the Down key to
select the PRINT menu.
CONFIGURATION PG
The configuration page prints and the printer goes back
to READY.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 171/254
Preventing Media Misfeeds 157
Preventing Media Misfeeds
Make sure that...
Media matches the printer specifications.
Media is flat, especially on the leading edge.
The printer is on a hard, flat, level surface.
You store media in a dry location away from moisture and humidity.
You remove transparencies from the output tray immediately after printing to
avoid static buildup.
You always adjust the media guides in the tray after inserting the media (a
guide that is not properly adjusted can cause poor print quality, media mis-
feeds, and printer damage).
You load the media printing-side up in the tray (many manufacturers place an
arrow on the end of the wrapper to indicate the printing side).
Avoid...
Media that is folded, wrinkled, or excessively curled.
Double feeding (remove the media and fan the sheets—they may be sticking
together).
Fanning transparencies since this causes static.
Loading more than one type/size/weight of media in a tray at the same time.Overfilling the trays.
Allowing the output tray to overfill (the output tray has a 350-sheet capacity—
misfeeding may occur if you allow more than 350 sheets of media to accumu-
late at one time).
Allowing the output tray to fill with more than a few transparencies.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 172/254
Understanding the Media Path158
Understanding the Media Path
Understanding the printer’s media path will help you locate media misfeeds.
1 Toner cartridge
2 Transfer belt unit
3 Imaging unit4 Laser
5 Tray 2
6 Tray 3 (optional)
7 Tray 4 (optional)
8 Tray 5 (optional)
9 Fuser unit
10 Duplex option11 Tray 1 (Manual feed tray)
10
1
11
9
6
5
7
8
2
3
4
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 173/254
Clearing Media Misfeeds 159
Clearing Media Misfeeds
To avoid damage, always remove misfed media gently, without tearing it. Any
piece of media left in the printer, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the printer.
CAUTIONUnfused toner can dirty your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off asbest as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.
CAUTIONIf you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the control panel
window persists, open and close the printer’s covers. This should clear the
misfeed message.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 174/254
Clearing Media Misfeeds160
Media Misfeed Messages and Clearing Procedures
If the message PAPER JAM/VERTICAL TRANS appears, check
for media misfeeds in the transfer roller section of the right side covers
for Tray 3 and/or Tray 4 and/or Tray 5.
Media Misfeed Message Page Reference
PAPER JAM
TRAY2
Page 161
PAPER JAM
TRAY3
Page 165
PAPER JAM
TRAY4
Page 165
PAPER JAM
TRAY5
Page 165
PAPER JAM
DUPLEX1
Page 167
PAPER JAMDUPLEX2
Page 167
PAPER JAM
FUSER/EXIT
Page 168
PAPER JAM
TRAY1
Page 172
PAPER JAM
SECOND TRANS
Page 172
PAPER JAM
VERTICAL TRANS
Page 165, Page 172
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 175/254
Clearing Media Misfeeds 161
Clearing a Media Misfeed in Tray 2
1 Pull the lever, and then open the
right side cover.
Before opening the right
side cover, open Tray 1.
2 Carefully pull out the misfed
media.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 176/254
Clearing Media Misfeeds162
CAUTIONThe area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.Be careful not to touch the
surface of the image transfer belt
or transfer roller.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 177/254
Clearing Media Misfeeds 163
3 Close the right side cover.
4 Pull out Tray 2, and then removeall media from the tray.
5 Fan the media you removed and
then align it well.
If transparencies are loaded, do not fan them; otherwise, static
electricity may be produced, resulting in another media misfeed.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 178/254
Clearing Media Misfeeds164
6 Load the media face up in Tray 2.
Make sure that the media is flat.
Do not load media above the mark.
Slide the media guides against the edges of the media.
7 Close Tray 2.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 179/254
Clearing Media Misfeeds 165
Clearing a Media Misfeed in Tray 3/4/5
1 Open the right side cover of
Tray 3 (4/5).
Before opening the right
side cover of Tray 3 (4/5),
fold up Tray 1.
2 Carefully pull out the misfed
media.
3 Close the right side cover of
Tray 3 (4/5).
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 180/254
Clearing Media Misfeeds166
4 Pull out Tray 3 (4/5), and then
remove all media from the tray.
5 Fan the media you removed and
then align it well.
6 Load the media face up in Tray 3 (4/5).
Make sure that the media is flat.
Do not load media above the mark.
Slide the media guides against the edges of the media.
7 Close Tray 3 (4/5).
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 181/254
Clearing Media Misfeeds 167
Clearing a Media Misfeed from the Duplex Option
1 Open the duplex cover.
2 Carefully pull out the misfed
media.
3 Close the duplex cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 182/254
Clearing Media Misfeeds168
Clearing a Media Misfeed from the Fuser Unit
1 Pull the lever, and then open the
right side cover.
Before opening the right
side cover, open Tray 1.
2 Push up the top cover.
3 Carefully pull out the misfed
media.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 183/254
Clearing Media Misfeeds 169
CAUTIONThe area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch thesurface of the image transfer belt
or transfer roller.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 184/254
Clearing Media Misfeeds170
4 Push up the M2 release levers,
and then pull inside cover M3
toward you to open it.
When pushing up the M2 release levers, push up both at the same
time.
The M2 release levers will automatically return to their correct orig-
inal positions when you close the top cover. Do not close them by
hand.
5 Pull out any media caught in the
fuser unit.
M2
M2
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 185/254
Clearing Media Misfeeds 171
6 After closing the top cover, close
the right side cover.
Be sure to close the top
cover before closing the
right side cover.
7 Close the right side cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 186/254
Clearing Media Misfeeds172
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray)and Transfer Roller
1 Remove all media from Tray 1.
2 If the misfed media cannot be
removed, pull the lever, and then
open the right side cover.
Before opening the right
side cover, open Tray 1.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 187/254
Clearing Media Misfeeds 173
3 Carefully pull out the misfed
media.
CAUTIONThe area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 188/254
Clearing Media Misfeeds174
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer beltor transfer roller.
4 Close the right side cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 189/254
Solving Problems with Media Misfeeds 175
Solving Problems with Media Misfeeds
Frequent misfeeds in any area indicate that area should be checked,
repaired, or cleaned. Repeated misfeeds may also happen if you’re
using unsupported print media.
Symptom Cause Solution
Several
sheets go
through the
printer
together.
The front edges of
the media are not
even.
Remove the media and even up the
front edges, then reload it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Too much static elec-
tricity is present.
Do not fan transparencies.
Media mis-
feed mes-
sage stays
on.
Right side cover
needs to be opened
and closed again to
reset the printer.
Open and close the right side cover of
the printer again.
Some media remains
misfed in the printer.
Recheck the media path and make
sure that you have removed all of the
misfed media.
Duplex
option mis-
feeds.
Unsupported media
(wrong size, thick-
ness, type, etc.) isbeing used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 88.Only plain paper, 60–90 g/m2 (16–24
lb) and thick paper, 91–256 g/m2 (25–
68.1 lb) can be autoduplexed. See
“Media Specifications” on page 88.
Make sure that you have not mixed
media types in Tray 1.
Do not duplex envelopes, labels, thick
stock, or transparencies.
Media is still being
misfed.
Recheck the media path inside the
duplex option and make sure that you
have removed all of the misfed media.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 190/254
Solving Problems with Media Misfeeds176
Media is
misfeeding.
The media is not cor-
rectly positioned in
the tray.
Remove the misfed media and reposi-
tion the media properly in the tray.
The number of sheets
in the tray exceeds
the maximum
allowed.
Remove the excess media and reload
the correct number of sheets in the
tray.
The media guides are
not correctly adjusted
to the media size.
Adjust the media guides in the tray to
match the size of the media.
Warped or wrinkled
media is loaded in the
tray.
Remove the media, smooth it out, and
reload it. If it still misfeeds, do not use
that media.
The media is moistfrom humidity.
Remove the moist media and replace itwith new, dry media.
Custom-sized media,
envelopes, labels,
postcards, thick
stock, or transparen-
cies are loaded in
Tray 2, 3, 4 or 5.
Special media must be loaded in
Tray 1 only.
The recommended
transparency or label
sheet is facing the
wrong way in Tray 1.
Load the transparencies or label
sheets according to the manufacturer’s
instructions.
Envelopes are facing
the wrong way in
Tray 1.
Load the envelopes in Tray 1 so the
flaps are facing up.
If the flaps are on the long edge, load
the envelopes with the flaps toward the
right of the printer.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 191/254
Solving Problems with Media Misfeeds 177
Media is
misfeeding.
Transparencies have
collected static elec-
tricity in the tray.
Remove the transparencies and load
them in the tray one sheet at a time.
Do not fan transparencies before load-
ing them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media.
See “Media Specifications” on page
88.
The media roller is
dirty.
Clean the media supply roller.
For more details, refer to “Media Roll-
ers” on page 149.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 192/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 193/254
Solving Other Problems 179
Images
cannot be
printed from
the digital
camera.
The digital camera
transfer mode is not
set to PictBridge.
Printer only
supports aPictBridge
compliant
digital camera.
Set the digital camera transfer mode to
PictBridge.
Printing
takes too
much time.
The printer is set to a
slow printing mode
(for example, thick
stock or transpar-
ency).
It takes more time to print on special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The printer is set to
Energy Saver mode.
It takes time for printing to start in
Energy Saver mode. If you do not want
to use this mode, disable it. (SYS
DEFAULT MENU/ENERGY SAVER
menu)
The job is very com-
plex.
Wait. No action needed.
The printer memory is
insufficient.
Add more memory.
A toner cartridge for a
different region or an
unapproved genuine
toner cartridge is
installed (INCOR-
RECT TONER X is
displayed in the mes-
sage window).
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific printer.
Blank pagescome out
during print-
ing.
One or more of thetoner cartridges are
defective or empty.
Check the toner cartridges. The imagewill not print if one or more cartridges
are empty.
The wrong media is
being used.
Check that the media type set in the
driver matches the media loaded in the
printer.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 194/254
Solving Other Problems180
Not all pages
print.
The printer has the
wrong kind of cable,
or the printer is not
configured for the
correct cable and
port.
Check your cable.
The Cancel key was
pressed.
Make sure no one pressed the Cancel
key while your job was printing.
Not all pages
print.
The tray is empty. Check that the trays are loaded with
media, in place, and secure.
A document is printed
with an overlay file
which has been cre-
ated by a non-magi-color 7450 driver.
Print the overlay file using a magicolor
7450 driver.
Printer
resets or
turns off fre-
quently.
The power cord is not
correctly plugged into
the outlet.
Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
A system error
occurred.
Contact Technical Support with the
error information.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 195/254
Solving Other Problems 181
You are
experienc-
ing duplex
problems.
Media or settings are
not correct.
For autoduplexing, make sure that you
have a duplex option installed.
Make sure that you are using correct
media.
See “Media Specifications” on page88.
Do not duplex envelopes, labels,
postcards, thick stock, or transpar-
encies.
Make sure that you have not mixed
media types in Tray 1.
Make sure that your document has
more than one page.
Make sure the duplex option is installed
and declared in the Windows printer
driver (Properties/Configure tab).
In the Windows printer driver (Layout/
Double-Sided), choose “Dou-
ble-Sided.”
For N-up on duplexed pages, choose
Collate only in the Windows driver’sPaper Tab. Do not set collation in the
application.
With N-up on
multiple cop-
ies, the out-
put is
incorrect.
Both the driver and
the application have
been set for collation.
For N-up on multiple copies, choose
Collate only in the Windows driver’s
Paper Tab. Do not set collation in the
application.
You hear
unusualnoises.
The printer is not
level.
Place the printer on a flat, hard, level
surface.The tray is not
installed correctly.
Remove the tray that you are printing
from and reinsert it completely into the
printer.
There is a foreign
object stuck inside
the printer.
Turn off the printer and remove the
object. If you cannot remove it, contact
Technical Support.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 196/254
Solving Other Problems182
The
web-based
utility cannot
be accessed.
The PageScope Web
Connection Adminis-
trator’s password is
incorrect.
The PageScope Web Connection
Administrator password has a 6-char-
acter minimum and a 16-character
maximum. For details of the Page-
Scope Web Connection administrator
password, refer to the magicolor 7450Reference Guide on the Documenta-
tion CD-ROM.
Media is
wrinkled.
The media is moist
from humidity or hav-
ing water spilled on it.
Remove the moist media and replace it
with new, dry media.
The transfer roller or
fuser unit is defective.
Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 88.
The date and
time is not
correctly
maintained
on theprinter.
The backup battery
has reached the end
of its service life.
Replace the backup battery. For
details, see “Replacing the Backup Bat-
tery” on page 139.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 197/254
Solving Problems with Printing Quality 183
Solving Problems with Printing Quality
Symptom Cause Solution
Nothing is
printed, orthere are
blank spots
on the
printed page.
One or more of the
imaging units may bedefective.
Remove the imaging units and check
for damage. If it is damaged, replace it.
The printer driver is
not set correctly.
Select the proper setting in the printer
driver to switch from transparencies to
plain paper.
The media is moist
from humidity.
Adjust the humidity for media storage.
Remove the moist media and replace it
with new, dry media.
The media set in the
printer driver mis-matches the media
loaded in the printer.
Load the correct media in the printer.
The power source
does not match the
printer specifications.
Use a power source with the proper
specifications.
Several sheets are
being fed at the same
time.
Remove the media from the tray and
check it for static electricity. Fan plain
paper or other media (but not transpar-
encies), and replace it in the tray.
Media is not set prop-
erly in the tray(s).
Remove the media, tap it to straighten
it out, return it to the tray, and realign
the media guides.
Entire sheet
is printed in
black or
color.
One or more of the
imaging units may be
defective.
Remove the imaging units and check
for damage. If it is damaged, replace it.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 198/254
Solving Problems with Printing Quality 184
Image is too
light; there is
low image
density.
Laser lens is dirty. Clean the laser lens.
The media is moist
from humidity.
Remove the moist media and replace
with new, dry media.
There is not much
toner left in the car-tridge.
Replace the toner cartridge.
One or more of the
imaging units may be
defective.
Remove the imaging units and check
them for damage. If one is damaged,
replace it.
The media type is set
incorrectly.
When printing envelopes, labels, post-
cards, thick stock, or transparencies,
specify the appropriate media type in
the printer driver.
Image is too
dark.
One or more of the
imaging units may be
defective.
Remove the imaging units and check
them for damage. If one is damaged,
replace it.
Image isblurred;
background
is lightly
stained;
there is
insufficient
gloss of the
printed
image.
One or more of theimaging units may be
defective.
Remove the imaging units and checkthem for damage. If one is damaged,
replace it.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 199/254
Solving Problems with Printing Quality 185
The print or
color density
is uneven.
One or more of the
toner cartridges may
be defective or low.
Remove the toner cartridges and
check them for damage. If one is dam-
aged, replace it.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
Irregular
print or mot-
tled image
appears.
The media is moist
from humidity.
Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
Unsupported media(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approvedmedia. See “Media Specifications” on
page 88.
One or more of the
imaging units may be
defective.
Remove the imaging units and check for
damage. If it is damaged, replace it.
There is
insufficient
fusing or theimage
comes off
when
rubbed.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Unsupported media(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approvedmedia. See “Media Specifications” on
page 88.
Media type is set
incorrectly.
When printing envelopes, labels, post-
cards, thick stock, or transparencies,
specify the appropriate media type in
the printer driver.
The levers on the
fuser unit are set to
the position for
envelopes.
Before printing on media other than
envelopes, be sure to return the levers
on the fuser unit to the setting for plain
paper.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 200/254
Solving Problems with Printing Quality 186
There are
toner
smudges or
residual
images.
One or more of the
imaging units may be
defective or installed
incorrectly.
Remove the imaging units and check
them for damage. If one is damaged,
replace it.
There are
toner
smudges on
the back side
of the page
(whether or
not it has
been
duplexed).
The media transfer
roller is dirty.
Clean the media transfer roller.
If you think the transfer roller should be
replaced, contact Technical Supportwith the error information.
The media path is
dirty with toner.
Print several blank sheets and the
excess toner should disappear.
One or more of the
imaging units may be
defective.
Remove the imaging units and check
for damage. If it is damaged, replace it.
Abnormal
areas (white,
black, or
color) appear
in a regular
pattern.
The laser lens is dirty. Clean the laser lens.
A imaging unit may
be defective.
Remove the imaging unit with the color
causing the abnormal image. Replace
it with a new imaging unit.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 201/254
Solving Problems with Printing Quality 187
Image
defects.
The laser lens is dirty. Clean the laser lens.
A toner cartridge may
be leaking.
Remove the toner cartridges and
check them for damage. If one is dam-
aged, replace it.
A imaging unit maybe defective.
Remove the imaging unit with the colorcausing the abnormal image.
Replace it with a new imaging unit.
Lateral lines
or bands
appear on
image.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
The media path is
dirty with toner.
Print several sheets and the excess
toner should disappear.
One or more of the
imaging units may bedefective.
Remove the imaging units and check
them for damage. If one is damaged,replace it.
Colors look
drastically
wrong.
One or more of the
imaging units may be
defective.
Remove the imaging units and verify
that the toner is distributed evenly on
each cartridge roller, and reinstall the
imaging units.
One or more of thetoner cartridges may
be low or empty.
Check the control panel for an X TONER LOW or TONER EMPTY X
message. If necessary, replace the
specified toner cartridge.
Colors are
not
registering
properly;
colors are
mixed orhave page-
to-page
variation.
One or more of the
imaging units may be
defective.
Remove the imaging units and check
them for damage. If one is damaged,
replace it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 202/254
Solving Problems with Printing Quality 188
If the problem is not resolved, even after all of the above have been per-
formed, contact Technical Support with the error information.For contact information, refer to the magicolor 7450 General Information
Guide.
The color
has a poor
reproduction
or has poor
color density.
One or more of the
imaging units may be
defective.
Remove the imaging units and check
them for damage. If one is damaged,
replace it.
Symptom Cause Solution
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 203/254
Status, Error, and Service Messages 189
Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel mes-
sage window. They provide information about your printer and help you locate
many problems. When the condition associated with a displayed message
has changed, the message is cleared from the window.
Standard Status Messages
This message... means... do this...
CALIBRATING After replacing a toner car-
tridge, or after rebooting
your printer after environ-
mental changes, your printer
automatically pauses to do a
75-second Auto-Image Den-sity Control (AIDC) cycle.
This process is provided to
make reliable printer opera-
tion with optimum output
quality possible.
No action needed.
CANCELLING JOB The job is being cancelled.
COPYING The printer is printing with
the collating function.
ENERGY SAVER The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power within 30 seconds.
FIRMWARE UPDATE The firmware is being
updated.
INITIALIZING The printer is being initial-
ized.
PRINTING The printer is printing.
PROCESSING The printer is processing
data.
READY The printer is on and ready
to receive data.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 204/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 205/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 206/254
Status, Error, and Service Messages192
PAPER EMPTY
TRAY X
Tray X (Tray 1, 2, 3, 4,
or 5) is empty.
(Appears when SYS
DEFAULT MENU/
ENABLE WARN-
ING/PAPER
EMPTY TRAY X is
set to ON.)
Load media into the
specified tray.
Tray X (Tray 2, 3, 4 or
5) is not correctly
installed.
(Appears when SYS
DEFAULT MENU/
ENABLE WARN-ING/PAPER
EMPTY TRAY X is
set to ON.)
Correctly install the
specified tray.
I-UNIT END
X
The X imaging unit
has reached the end
of its life.
(Appears when SYS
DEFAULT MENU/
IMAGING UNIT
LIFE is set to STOP.)
Replace the imaging
unit.
I-UNIT LOW
X
The X imaging unit is
low and should be
replaced within 2,000
pages at 5% cover-
age of letter/A4
pages.
(Appears when SYS
DEFAULT MENU/
ENABLE WARN-
ING/I-UNIT LOW
is set to ON.)
Prepare the specified
color imaging unit.
This message... means... do this...
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 207/254
Status, Error, and Service Messages 193
I-UNIT LIFE
X
The X imaging unit
has reached the end
of its life. IfIMAGING
UNIT LIFE on the
SYS DEFAULT
MENU is set to
CONTINUE, you are
advised to replace the
indicated imaging unit
when the message
I-UNIT END X
appears.
Replace the imaging
unit.
If CONTINUE was set,
instead of the Operator
Call message “I-UNITLIFE” appearing, print-
ing continues until the
message “I-UNIT END”
appears.
TONER EMPTY
X
The X toner cartridge
is empty.
Replace the toner car-
tridge.Printing does not stop
immediately when this
message appears.
Therefore, if printing is
continued, the Operator
Call message “TONER
EMPTY” appears, and
then printing stops.
(Refer to page 198.)TONER LOW
X
The X toner cartridge
is low and should be
replaced within 1,200
pages at 5% cover-
age of letter/A4
pages.
(Appears when SYS
DEFAULT MENU/
ENABLE WARN-ING/TONER LOW is
set to ON.)
Prepare the specified
color toner cartridge.
This message... means... do this...
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 208/254
Status, Error, and Service Messages194
TRANS. BELT
END OF LIFE
The transfer belt unit
has reached the end
of its life.
Contact Technical Sup-
port with the error infor-
mation.
Printing does not stop
immediately when thismessage appears.
Therefore, if printing is
continued, the Operator
Call message
“TRANS.BELT LIFE”
appears, and then print-
ing stops. (Refer to page
198.)
UNABLE TOCOLLATE JOB
The hard disk is full.
Print jobs over 10,000
pages cannot be col-
lated.
Print one copy of the file
at a time.
UNKNOWN PAPER
TRAY X
The media size
cannot be detected
automatically.
Use media of a size that
can be detected by the
printer. Otherwise,
adjust the media guides
in the tray to a position
where the media size
can be recognized.
WASTE TONER
NEAR FULL
The waste toner bot-
tle is nearly full.
Prepare a new waste
toner bottle.
This message... means... do this...
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 209/254
Status, Error, and Service Messages 195
Error Messages (Operator Call: )
This message... means... do this...
COVER OPEN
DUPLEX COVER
The duplex cover is
open.
Close the duplex cover.
COVER OPEN
FRONT COVER
The printer’s front
cover is open.
Close the front cover.
COVER OPEN
SIDE COVER
The printer’s right
side cover is open.
Close the right side
cover.
COVER OPEN
TRAYX COVER
The right side cover
of Tray X (Tray 3, 4 or
5) is open.
Close the right side
cover of the tray.
FUSER UNIT LIFE
REPLACE
FUSER UNIT
The fuser unit has
reached the end of its
life.
Contact Technical Sup-
port with the error infor-
mation.
HOLD JOB ERROR
UNABLE TO
STORE JOB
The specified print job
saved on the hard
disk is sent while the
hard disk is not
installed.
Print jobs can be saved
only if a hard disk is
installed. If desired,
install a hard disk.
MANUAL EMPTY
“SIZE”
“MEDIA”
Tray 1 was specified
with the printer driver
as Manual Feed forprinting, but Tray 1 is
empty.
Load the correct media
into Tray 1.
MANUAL FEED
“SIZE”
“MEDIA”
The Paper Source in
the printer driver is
set to Tray 1 (Manual
Feed), but there is
already media in the
tray when printing
begins.
Press the Up key to
print, or remove and
reload the media in Tray
1.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 210/254
Status, Error, and Service Messages196
MEMORY FULL
PRESS CANCEL
The printer has
received more data
than can be pro-
cessed with its inter-
nal memory.
Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed (for
example, by decreasing
the resolution), and thentry printing again.
If that doesn’t solve the
problem, install an
optional memory mod-
ule.
NO WASTE BOTTLE
CHECK BOTTLE
The waste toner bot-
tle is not installed.
Install waste toner bot-
tle.
OUTPUT FULLREMOVE PAPER
The output tray is fullof media.
Remove all media fromthe output tray.
PAPER EMPTY
“SIZE”
“MEDIA”
The specified tray is
empty. (Appears
when PAPER/
PAPER SOURCE/
TRAY CHAINING
ON is set.)
Load the correct media
into the specified tray.
PAPER ERROR“SIZE”
“MEDIA”
The media size/typeset in the printer
driver is different from
the size/type of media
loaded (Appears
when PAPER/
PAPER SOURCE/
TRAY CHAINING
ON is set.)
Load the correct mediasize and type.
This message... means... do this...
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 211/254
Status, Error, and Service Messages 197
PAPER JAM
DUPLEX1
Media has misfed in
the duplex option.
Press the Down key to
display the help screen.
Follow the instructions in
the help screen to
remove the misfed
media.
PAPER JAM
DUPLEX2
Media has misfed in
the duplex option.
PAPER JAM
FUSER/EXIT
Media has misfedleaving the fuser
area.
PAPER JAM
SECOND TRANS
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the media
exit area.
PAPER JAM
TRAY1
Media has misfed in
Tray 1.
PAPER JAM
TRAYX
Media has misfed
while being pulled
from the specified
tray (Tray 2, 3, 4 or 5).
PAPER JAM
VERTICAL TRANS
Media has misfed in
the vertical transferarea.
I-UNIT END
REPLACE
X
The X imaging unit
has completely
reached the end of its
life.
Replace the imaging
unit.
I-UNIT LIFE
REPLACE
X
The X imaging unit
has reached the end
of its life. This mes-
sage appears whenthe SYS DEFAULT/
IMAGING UNIT
LIFE menu is set to
STOP.
Replace the imaging
unit.
Press in the controlpanel and select CON-
TINUE from the help
screen to print 20 pages
or temporarily continue
printing until the current
job is completed. How-
ever, if printing is contin-
ued, the message
“I-UNIT END” appears
and printing stops.
This message... means... do this...
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 212/254
Status, Error, and Service Messages198
I-UNIT MISSING
CHECK X
The X imaging unit is
not installed, or an
unapproved imaging
unit is installed.
Install a correct KONICA
MINOLTA imaging unit.
TONER EMPTY
REPLACE
X
The X toner cartridge
is completely empty.
Replace the toner car-
tridge.
TONER MISSING
CHECK X
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed.
Install a correct KONICA
MINOLTA toner car-
tridge.
TRANS.BELT LIFE
REPLACE
TRANS.BELT
The transfer belt unit
has reached the end
of its life.
Contact Technical Sup-
port with the error infor-
mation.
TRAYX EMPTY
“SIZE”
“MEDIA”
The X (Tray 1, 2, 3, 4
or 5) was specified
with the printer driver
for printing, but Tray X
is empty. This mes-
sage appears when
the PAPER/PAPER
SOURCE/TRAY
CHAINING menu is
set to OFF.
Load the correct media
into the specified tray.
TRAYX PAPER ERR
“SIZE”
“MEDIA”
The media size/type
set in the printer
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER/PAPER
SOURCE/TRAY
CHAINING menu is
set to OFF.
Load the correct media
size and type.
TRAYX SIZE ERR
ADD
“SIZE”
The media size set in
the printer driver is
different from the size
of media loaded.
Load the correct media
size into the specified
tray.
This message... means... do this...
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 213/254
Status, Error, and Service Messages 199
TRAYX TYPE ERR
ADD
“MEDIA”
The media type set in
the printer driver is
different from the type
of media loaded.
Load the correct media
type into the specified
tray.
WASTE TONER FULL
REPLACE BOTTLE
The waste toner
bottle is full.
Install a new waste toner
bottle.
This message... means... do this...
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 214/254
Status, Error, and Service Messages200
Service Messages:
These messages indicate a more serious error that can only be corrected by
a customer service engineer. If one of these messages appears, turn the
printer off, then turn it on again. If the problem persists, contact your local
vendor or authorized service provider.
This servicemessage...
means... do this...
SERVICE CALL XXXX
“Error”
An error has been
detected with the item
indicated “XXXX ” in the
service message.
Information about errors
appears at the bottom of
the message window.
Reboot the printer. This
often clears the service
message, and printer
operation can resume.
If the problem persists,
contact Technical Sup-
port.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 215/254
Installing Accessories
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 216/254
Introduction202
Introduction
Note
Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.
This chapter provides information about the following accessories.
Note
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
Dual In-Line
Memory Module
(DIMM)
256 MB, 512 MB DIMM
(DDR-SDRAM, 266 MHz, 184 pins, No ECC, Unbuf-
fered, CL=2 or 2.5)
Duplex Option Auto duplexing
Lower Feeder Unit
(Tray 3/4/5)
500-sheet tray included
Hard Disk 40 GB Hard Disk
CompactFlash 256 MB/512 MB CompactFlash Card
Caster Base For floor setup
Banner Tray For long paper
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 217/254
Antistatic Protection 203
Antistatic Protection
Note
It’s very important to protect the printer controller board from
electrostatic damage while performing any task involving the controller
board.
Turn off all power switches first. If an antistatic wrist strap is provided in
your printer option kit, attach one end of it to your wrist and the other
end to the bare metal chassis on the back of your printer. Never attach
the wrist strap to any piece of equipment with an electrical current
present. Plastic, rubber, wood, painted metal surfaces, and telephones
are not acceptable grounding points.
If you don’t have an antistatic wrist strap, discharge your body’s static
electric charge by touching a grounded surface before you handle any
printer boards or components. Also avoid walking around after
grounding yourself.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 218/254
Dual In-Line Memory Module (DIMM)204
Dual In-Line Memory Module (DIMM)
You may need additional memory (DIMM) for complex graphics and
for duplex printing.
Dual in-line memory module (or DIMM) is compact circuit board with sur-
face-mount memory chips.
The printer, which has two memory slots, has a 256 MB memory module
already installed in one of the slots. By using both slots, the memory can be
expanded to a maximum of 1024 MB (512 MB + 512 MB).
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performingthis procedure, review the antistatic caution on page 203. In addition,
always handle circuit boards by the edges only.
1 Turn off the printer and discon-
nect the power cord and inter-
face cables.
2 Using a coin, remove the screw,
and then lift up the left-side
cover to remove it.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 219/254
Dual In-Line Memory Module (DIMM) 205
3 Insert the new DIMM straight
into the DIMM connector until
the latches snap into the locked
position.
Observe the keyed side of the
DIMM to align it with the connec-
tor. If you cannot snap the DIMMinto place, do not force it. Repo-
sition it, making sure that the
DIMM is seated completely in
the connector.
4 Attach the left-side cover and tighten the screws.
5 Reconnect all interface cables.
6 Reconnect the power cord, and
turn on the printer.
7 Declare the additional RAM in the Windows printer driver (Properties/Con-
figure tab).
8 Print a configuration page (PRINT/CONFIGURATION PG) and verify
that the total amount of the RAM installed in your printer is listed.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 220/254
Hard Disk 206
Hard Disk
If a hard disk is installed, fonts can be downloaded and saved, and the over-
lay function can be used.
Installing a Hard Disk
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 203. In addition,
always handle circuit boards by the edges only.
1 Turn off the printer and discon-
nect the power cord and inter-
face cables.
2 Using a coin, remove the screw,
and then lift up the left-side
cover to remove it.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 221/254
Hard Disk 207
3 Plug the cable on the hard disk
into the connector on the con-
troller board.
4 Insert the three mounting pins
on the hard disk into the holes inthe controller board to mount the
hard disk onto the controller
board.
5 Attach the left-side cover and tighten the screws.
6 Reconnect all interface cables.
7 Reconnect the power cord, and
turn on the printer.
8 Declare the hard disk in the Windows printer driver (Properties/Configure
tab).
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 222/254
CompactFlash208
CompactFlash
If a CompactFlash card is installed, resources such as fonts, macros and pro-
files can be downloaded, and image files can be printed directly.
Only CompactFlash cards with a capacity of 256 MB or 512 MB can
be used.
The Collate, Hold Job, and job accounting functions are not available
with a CompactFlash card. These functions require that an optional
hard disk be installed.
Installing the CompactFlash card
Note
If the installed CompactFlash card was used with a device other thanthis printer, such as a computer or digital camera, the card is
automatically formatted and all of its data is deleted.
Note
It is very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 203. In addition,
always handle circuit boards by their edges only.
1 Turn off the printer and discon-
nect the power cord and inter-
face cables.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 223/254
CompactFlash 209
2 Using a coin, remove the screw,
and then lift up the left-side
cover to remove it.
3 Fully insert the CompactFlash
card into the appropriate slot.
When the CompactFlash card iscorrectly inserted, the button on
the right side of the slot (circled
in the illustration) slightly pops
out.
Before removing the
CompactFlash card,
press in this button.
4 Attach the left-side cover and tighten the screw.
5 Reconnect all interface cables.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 224/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 225/254
Duplex Option 211
Duplex Option
Duplex (2-sided) printing can be performed automatically with the duplex
option and enough memory installed. See “Duplexing” on page 120.
Kit Contents
1—Duplex option
2—Connector cover
Installing the Duplex Option
1 Turn off the printer.
2 Remove the two covers on the
right side.
1
2
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 226/254
Duplex Option212
3 Pull the lever, and then open the
right side cover.
Before opening the right
side cover, open Tray 1.
4 Inside the right-side cover, pressthe tab on the cover shown in
the illustration, and then remove
the cover.
5 Close the right side cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 227/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 228/254
Duplex Option214
9 While pressing on the inside the
cover of the duplex option,
secure the duplex option with
the two screws.
Use a coin to install the
screws.
10 Close the duplex cover.
11 Insert the connector on the
duplex option into the connector
on the machine.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 229/254
Duplex Option 215
12 Attach the connector cover to
the machine.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 230/254
Lower Feeder Unit 216
Lower Feeder Unit
You can install up to three optional lower feeder units (Trays 3, 4 and 5). Each
lower feeder unit increases your printer’s media feed capacity by 500 sheets.
Kit Contents
1— Lower feeder unit with a tray (500-sheet capacity)
2— Four metal brackets
– Two front brackets
– Two rear brackets
3— Four securing screws
4— Upper cover
5— Lower cover
6— Media size label
Installing a Lower Feeder Unit
NoteSince consumables are installed in the printer, be sure to keep the
printer level when moving it in order to prevent accidental spills.
Note
When setting up the printer and lower feeder unit at the same time,
attach the lower feeder unit before setting up the printer.
If consumables are first loaded into the printer, it may become heavy,
making it difficult to perform the procedure.
1
2 4
5
3
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 231/254
Lower Feeder Unit 217
1 Turn off the printer and discon-
nect the power cord and inter-
face cables.
2 Remove the lower-right cover of
the printer, as shown in the illus-
tration.
Remove the cover by inserting
your finger into the hole at the
front of the cover, then pulling off
the cover as shown.
3 Prepare the lower feeder unit.
Be sure to place the
lower feeder unit on a
level surface.
Do not remove the tape
securing the relay har-ness on the lower feeder
unit until the unit is con-
nected to the machine.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 232/254
Lower Feeder Unit 218
4 Attach the upper cover to the sec-
ond and subsequent lower feeder
units.
If only one lower feeder
unit was installed, do not
install the upper cover.
5 If multiple lower feeder units are
to be installed, stack themtogether.
6 Use a screwdriver to attach the
two securing brackets to the rear
of the trays in order to secure
the lower feeder units together.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 233/254
Lower Feeder Unit 219
7 Pull out the trays, and then use a
screwdriver to attach the two
securing brackets in order to
secure the lower feeder units
together.
8 With another person’s help,
place the printer on top of the
lower feeder unit, making sure
that the positioning pins on the
lower feeder unit correctly fit into
the holes on the bottom of the
printer.
If two or three lower feeder units are to be installed, stack the lowerfeeder units and secure them together before installing them to the
printer.
When placing the printer on the optional tray unit, align the front
and back of the printer and the unit.
59 kg129.9 lbs
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 234/254
Lower Feeder Unit 220
WARNING!Lifting the printer in an awkward position or transporting it in a poorly
balanced position could result in personal injury.
When transporting the printer, assign an adequate number of persons
to the job and ensure that each person can take a good position of not
being excessively loaded. (weight: 59 kg/129.9 lb)
Note
Before placing the printer on the lower feeder unit, make sure that the
lower-right cover of the printer has been removed. If the cover has not
been removed, the printer or lower feeder unit may be damaged.
9 Using a screwdriver, install thetwo securing brackets at the rear
of the printer.
10 Pull out the trays.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 235/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 236/254
Lower Feeder Unit 222
13 Remove the mounting tape on
the relay harness of the lower
feeder unit, and then remove the
cover over the relay harness
connection slot on the printer.
If multiple lower feeder units
have been installed, remove the
cover over the relay harness
connection slot for any lower
feeder unit other than that on the
bottom, and remove the mount-
ing tape on the relay harness.
Use a coin to remove the
screws of the cover.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 237/254
Lower Feeder Unit 223
14 Connect the relay harness to the
slot.
If multiple lower feeder units
have been installed, connect the
relay harness of the bottom unit
to the relay harness connection
slot of the lower feeder unit, and
then install the cover at its origi-
nal position.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 238/254
Lower Feeder Unit 224
15 Attach the covers included with
the lower feeder units to the right
side of the printer, and attach the
label indicating the size of the
loaded media onto the front of
the lower feeder unit.
16 Declare Tray 3/4/5 in the Windows printer driver (Properties/Configure
tab).
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 239/254
Caster Base 225
Caster Base
By installing the caster base, the printer can more easily be set up at different
locations.
Note
When using the caster base, attach the bottom lower feeder unit to thecaster base before attaching the lower feeder unit to the printer.
Kit Contents
1— Caster Base
2— Three fixed legs
3— Three mounting screws for fixed legs
4— Two adjusters
5— Four linking plates
6— Four mounting screws for linking plates
7— Three ground fittings
8— Three mounting screws for ground fittings
1
7
4
3
8
5
2
6
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 240/254
Caster Base226
Installing the Caster Base
1 Use the screws to attach the
three ground fittings to the
caster base.
2 Screw the two adjusters onto the
caster base.
3 Use the screws to attach the
three fixed legs to the caster
base.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 241/254
Caster Base 227
4 Place the bottom optional lower
feeder unit that is to be installed
on the caster base.
For correct positioning,
align the two marks,
which can be seen inside
the hole in the lowerfeeder unit.
5 Use the screws and linking
plates to secure the lower feeder
unit to the caster base.
The linking plates can be
installed at either the two loca-
tions at the front or the two loca-
tions at the back of the caster
base.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 242/254
Caster Base228
6 Turn the adjusters to adjust their
heights and secure the caster
base so that it does not move.
Note
Be sure that the caster base is secured at all times except when the
printer is being moved to a different location.
For details on attaching lower feeder units to the printer, See “Install-
ing a Lower Feeder Unit” on page 216.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 243/254
Banner Tray 229
Banner Tray
If the banner tray is installed, banner paper up to 1200 mm long can be
loaded.
Installing the Banner Tray
1 Open Tray 1 (Manual Feed
Tray).
Do not pull out the tray
extension. If the tray
extension is already
pulled out, push it in.
2 Slide the media guides to pro-
vide more space between them.
3Lift up the banner tray paper
guide.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 244/254
Banner Tray 230
4 Insert the banner tray into Tray
1.
Fully insert the banner
tray until the tab on the
back of the banner tray
touches the side of Tray 1
5 Load the banner paper face
down with the end inserted into
the slot as much as possible,
and then place the other end of
the paper over the banner tray
paper guide.
A maximum of 10 sheets
of banner paper can be
loaded into the banner
tray.
In order to avoid toner smudges, do not load curled paper.
6 Slide the media guides against the edges of the banner paper.
Make sure that the media
guides are firmly pushed
against the left and right
sides of the banner
paper.
7 Begin printing.
Specify the same paper size as that specified with the custom size
settings in the printer driver.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 245/254
Banner Tray 231
Remove each sheet of banner paper after it is fed out, otherwise
the banner paper that is fed out may fall from the printer or cause a
media misfeed in the printer.
After printing on banner paper, be sure to remove the banner tray
and store it in a safe place.
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 246/254
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 247/254
Appendix
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 248/254
Safety Specifications234
Safety Specifications
Technical Specifications
Printer
Printer
Safety standards U.S. model UL 60950-1, CSA C22.2 No.
60950-1-03
European model EU Directive 73/23/EECEU Directive 93/68/EEC
EN 60950-1 (IEC 60950)
China model GB 4943
EMC standards U.S. model FCC part 15 subpart B class B
ICES-003
European model EU Directive 89/336/EEC
EU Directive 93/68/EEC
EN 55022 (CISPR Pub. 22) class B
EN 61000-3-2EN 61000-3-3
China model GB 9254 class B, GB 17625.1
Australian model EN 55022 class B
Type Desktop full color tandem laser beam printer
Print system Semiconductor laser beam scanning +
Dry electron photography method
Exposure system 4 laser diode and polygon mirror
Developing system Two-component HMT
Resolution 600 dpi × 600 dpi × 4 bits
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 249/254
Technical Specifications 235
First print Simplex
Monochrome/Full color:
8.1/11.4 seconds for A4 (plain
paper)
Monochrome/Full color:
8.2/11.4 seconds for Letter (plain
paper)Duplex
Monochrome/Full color:
15.8/19.1 seconds for A4 (plain
paper)
Monochrome/Full color:
15.9/19.2 seconds for Letter
(plain paper)
Print speed Simplex
Monochrome/Full color:25.0 pages per minute for A4
(plain paper)
Monochrome/Full color:
24.5 pages per minute for Letter
(plain paper)
Duplex
Monochrome/Full color:
23.5 pages per minute for A4
(plain paper)
Monochrome/Full color:23.0 pages per minute for Letter
(plain paper)
Warm-up time Avg. 99 seconds
Media sizes Tray 1 (Manual feed tray)
Paper width: 90 to 311 mm (3.55 to 12.25")
Paper length: 140 to 1200 mm (5.50 to 47.24")
Tray 2
Paper width: 90 to 311 mm (3.55 to 12.25")
Paper length: 140 to 457 mm (5.50 to 18.00")
Trays 3, 4 and 5 (Optional)
A5 - A3/11 × 14
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 250/254
Technical Specifications236
Paper/Media • Plain paper (64 to 90 g/m2; 17 to 24 lb bond)
• Recycled paper (64 to 90 g/m2; 17 to 24 lb
bond)
• Transparency
• Transparency2
• Envelopes
• Thick Stock 1 (91 to 150 g/m2)• Thick Stock 2 (151 to 210 g/m2)
• Thick Stock 3 (211 to 256 g/m2)
• Postcard
• Letterhead
• Label sheets
• Glossy Stock
Input capacity Tray 1 (Manual feed tray)
Plain/Recycled paper:100 sheets
Envelope/Label/Postcard/Thick Stock/GlossyStock/Transparency/Letterhead:
10 sheets
Tray 2
Plain/Recycled paper:250 sheets
Envelope/Thick Stock 3:10 sheets
Label/Postcard/Thick Stock1, 2/Glossy Stock
Transparency/Letterhead:
50 sheets
Tray 3, 4 and 5 (Optional)Plain/Recycled paper:500 sheets
Output capacity Output tray: 350 sheets (A4, Letter)
Operating temperature 10 to 35°C (50 to 95°F)
Operating humidity 15 to 85%
Power supply 110 to 127 V, 50 to 60 Hz
220 to 240 V, 50 to 60 Hz
Power consumption 120 V: 1450 W
230 V: 1450 WEnergy Saver Mode: Average 28W or less (with-
out options)
Amperage 120 V: 12.0 A or less
220 to 240 V: 6.5 A or less
Acoustic Noise Printing: 52 dB or less
Standby: 40 dB or less
External dimensions Height: 477 mm (18.8")
Width: 650 mm (25.6")
Depth: 603 mm (23.7")
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 251/254
Technical Specifications 237
Weight Printer: approximately 50.5 kg (111.3 lb)
Toner cartridge:
Standard in-box cartridge =
0.3 kg (0.7 lb) (Y, M, C)/
0.4 kg (0.9 lb) (K)
Replacement cartridge (High-Capacity) =
0.5 kg (1.1 lb) (Y, M, C)/0.7 kg (1.6 lb) (K)
Imaging unit: 1.7 kg (3.7 lb) (Y, M, C, K)
Interface USB 2.0 (High Speed) compliant, 10Base-T/
100Base-TX/1000Base-T Ethernet, Parallel,
PictBridge 1.0, Compact Flash Card Slot
Standard memory 256 MB
Backup battery CR2032 3V Lithium Coin Battery
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 252/254
Technical Specifications238
Consumable Life Expectancy Chart
The values listed in the below tables indicate the number of pages for
simplex printing using A4/Letter-size media with 5% coverage.
The actual life may differ (be shorter) depending on the printing condi-
tions (coverage, paper size, etc.), differences in the printing method,
such as continuous printing or intermittent printing (when print jobs of
one page are often printed), or the type of paper used, for example,
thick paper. In addition, the life will be affected by the temperature and
humidity of the operating environment.
User-Replaceable
Service-Replaceable
Item Average Life Expectancy
Toner cartridge Standard in-box Cartridge:
Printed within a constant environment
Average 3,000 pages (3 pages per job)
Replacement Cartridge (High-Capacity):
Printed within a constant environment
Average 15,000 pages (K) (3 pages per job)
Average 12,000 pages (C, M, Y) (3 pages per job)
Waste toner bottle 18,000 pages (3 pages per job)
Imaging unit 30,000 pages (C, M, Y) (3 pages per job)
50,000 pages (K) (3 pages per job)
Air Filter (Bundle with
black toner cartridge)
7,500 or 15,000 pages (3 pages per job)
Dust Filter (Bundle
with waste toner bot-
tle)
18,000 pages (3 pages per job)
Note: A constant environment is one with a temperature between
15 °C [59 °F] and 25 °C [77 °F] and humidity between 35% and 70%.
Item Average Life Expectancy
Fuser unit 120,000 pages (3 pages per job)
Media feed roller 200,000 pages (3 pages per job)
Transfer unit 120,000 pages (3 pages per job)
Transfer roller 120,000 pages (3 pages per job)
Ozone filter 120,000 pages (3 pages per job)
Dustproof filter 120,000 pages (3 pages per job)
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 253/254
Index
Index 239
AAccessories 202
DIMMs 204
Duplex option 211
Hard disk 206
Lower feeder unit 216
Antistatic protection 203
BBanner Tray 229
CCamera Direct 84
Caster Base 225
Configuration menu 32
Consumables
Backup battery 139
Imaging unit 132Toner cartridge 126
Waste toner bottle 137Control panel 28
DDual in-line memory module 204
Duplexing 120
Duplex option 211
EElectrostatic discharge 203
Envelopes 92
Error messages 190
GGlossy Stock 97
HHard disk 206
8/11/2019 KM 7450 User Manual
http://slidepdf.com/reader/full/km-7450-user-manual 254/254