kingsbrite norton ca brochure low
TRANSCRIPT
Good choice for light deburring and blending operation.
FEATURES BENEFITS
• New Clean Bond resin system • Smear-free, even on high nickel content alloys• Will not load on aluminum and soft metals, as
competitive products can
• Proprietary new coating method • Thick layer of grain throughout the product extends life; grain does not sit on top of fibers as on other competitive products
• Extended form holding • Lowers total cost of consumable tooling per workpiece
• Good choice for light deburring and blending operations
• Provide better grain utility while remaining flexible
CATEGORY DEFINITIONMade from non-woven synthetic �ber mesh, which is impregnated with abrasives and bound with resins, non-woven wheels are designed to create desired surface �nsih wherelittle or no stock removal is required. The industry's broadest o�er is available for lightstock removal, deburring, blending, �nishing and polishing. Non woven wheels have an open mesh construction that is waterproof, washable, conformable and non-loading.
APPLICATION: Clean and remove imperfections on metal surfaces, clean built-up residue, deburr or �nsh a variety of surfaces, blend weld seams or create decorative �nishs. Non-woven surface �nish products have excellent versatillity.ABRASIVE GRAIN: Aluminum Oxide, Sillicon CarbideGRIT RANGE: Extra Coarse (XC), Coarse (C), Medium (M), Very Fine (VF)
NON-WOVEN WHEELS
NON-WOVEN DISCS
Standard Tier / Aluminum Oxide
Good Tier / Aluminum Oxide
Good choice for �nishing and blending applications, such as removing surface defects, light edge burrs, parting lines, �ashing, rust, oxides, corrosion, paints; blending mill marks, tool marks, uneven edges, and applying decorative �nishes.
FEATURES BENEFITS
• New Clean Bond resin system • Smear-free, even on high nickel content alloys• Will not load on aluminum and soft metals, as
competitive products can
• Proprietary new coating method • Thick layer of grain throughout the product extends life; grain does not sit on top of fibers as on other competitive products
• Extended form holding • Lowers total cost of consumable tooling per workpiece
Better Tier / Vortex Aluminum Oxide
FEATURES BENEFITS
• Proprietary Vortex aluminum oxide aggregate grain
• Most consistent cutting and finishing of surface conditioning products on the market
• Combines fast cutting speed with the finish of finer grits• Reduces process times by 50+% by combining multiple grit
sequences to 1 step in a blending operation• Friable grain structure keeps Ra specs throughout disc life
and reduces scrap and rework
• New, proprietary coating method• More resistant to edge wear; up 4X life versus competitive products
• Thick layer of grain throughout the product extends life; grain does not sit on top of fibers as on other competitive products
• New Clean Bond resin system • Smear-free, even on high nickel content alloys• Will not load on aluminum and soft metals, as competitive
products can
• Extended form holding • Lowers total cost of consumable tooling per workpiece
Best choice for �nishing and blending applications
For cleaning, blending, �nishing, and deburring in wood working, metalworking, maintenance operations, and synthetics fabrication.
FEATURES BENEFITS
• Superior flexibility • Conforms to a workpiece for a consistent finish
• Advanced web design • Cuts quicker than standard hand pad
Better Tier / Aluminum Oxide or Silicon Carbide
Saint-Gobain Abrasives South-East AsiaEmail: [email protected]:Thailand/Myanmar/Laos/Cambodia:+66 2 493 5400Indonesia:+62 21 8898 6262 / +62 31 8474 358Malaysia-Singapore: Toll free number For MY : 1800818821Toll free number For SG : 8008526542Philippines: +63 2 886 9176Vietnam: +84 3776 2026 (Ext. 703)
www www
www.nortonabrasives.com/en-sea
www.saint-gobain-abrasives.com/en-sea
Norton Abrasives SEA Saint-gobain Aabrasives South-East Asia
VORTEX GRAIN TECHNOLOGY NON-WOVEN QUICK-CHANGE DISCS
HIGH PERFORMANCE HAND PADS
NON-WOVEN BELTS
Contact our distrubutor:Kings Brite Co.,Ltd.129/33-1 Moo 3, T. Wangchula, A. Wangnoi, Ayuttaya, 13170Tel: (66) 0-3592-2779 Fax: (66) 0-3592-2778KB Callcenter : 092-519-7999 E-mail: [email protected]