DIG

ITALM

ETERS

42

KEP Counters & Timers

KAL-D06 8 Digit Electronic Counter

• Low speed input for contact closures

• High speed input sinks 18V max• Optional quadrature & high

voltage inputs• 10 year lithium battery –

no external power needed• NEMA 4X (IP65) front• UL recognized

Display: LCD, digits 0.35" (9mm) highReadout: 8 digits with leading zero blanking Reset: Panel or external (can be disabled)Backlight: Requires external 5V supply (20 mA) Hi-speed Input: NPN sink; 18V, 10kHz max Lo-speed Input: NPN sink or contact closure; 18V, 30Hz maxQuadrature Input: NPN sink or push pull, 18V, 2.5kHz maxReset Input: >15ms NPN sink or contact closure; 18V maxDirection Input: NPN sink or contact closure; 18V max (Lo=down)Hi-voltage Input: Count 10 pulses/sec max; opto-isolated 250VAC/120VDC max Hi-voltage Reset: >15ms, opto-isolated 250VAC/120VDC max Temperature: -10 to 60°C operatingCase: 24 x 48 x 52 mm

SPECIFICATIONS

KAL-DTIME 8 Digit Electronic Timer

• Electronic or contact closure input• Powered by 10 year

lithium battery• High voltage input

optional• NEMA 4X (IP65) front• UL Listed

Display: LCD, digits 0.35" (9mm) highReadout: 8 digits with leading zero blanking

SECONDS: 99999999MINUTES and SECONDS: 99999-59HOURS and 1/100ths: 99999-99HOURS and MINUTES: 99999-59

Reset: Panel or external (can be disabled)Backlight: Requires external 5V supply (20 mA)Timing Input: NPN sink, negative edge trigger; 18V max Reset Input: >15ms NPN sink or contact closure; 18V maxDirection Input: NPN sink or contact closure; 18V max (Lo=down)Hi-voltage Input: Opto-isolated 250VAC/120VDC max Hi-voltage Reset: >15ms, opto-isolated 250VAC/120VDC max Temperature: -10 to 60°C operatingCase: 24 x 48 x 52 mm

924K Counter, Rate Meter & Timer

• Displays actual value, presets, batch count or total count

• 3 predefined parameter settings

• Tracking presets • 4 stage RESET modes • 2 relay outputs • 3 stage key lockout

Display: 2 line, 6 digit red LCD Count Inputs: NPN/PNP, 5kΩ, 55 kHz maxSwitching Level: Low=0-4 VDC, High=12-30 VDC (924KA)Count Modes

Pulse: cnt.dir, up.dn, up.up, quad, quad 2, quad 4, A/B, (A-B)/A x 100%

Frequency: A, A-B, A+B, quad, A/B, (A-B)/A x 100%Timer: FrErun, Auto, InpA.InpB., InpB.InpB.

Monitor/Reset Inputs: MPI, lock, gate, resetPulse Duration: 10 ms/1 ms min.Relay 1: Form A, programmable NO or NCRelay 2: Form CMax. Switching: 250 VAC / 110 VDC, 3 A, 750 VA / 90 WSensor Supply: 24 VDC, 80mATemperature: -20 to +65 °C operatingProtection: IP65 (front)Case: 1/8 DIN (48 x 48 x 107mm)

ORDERING INFORMATION

SPECIFICATIONS

SPECIFICATIONS

KAL-D06 8 digit counter with 10 yr batteryKAL-DQUAD06 8 digit counter with 10 yr battery

& Quadrature InputKAL-D06AC/DC 8 digit counter with 10 yr battery

& High Voltage Input

KAL-DTIME 8 digit timer with 10 yr batteryKAL-DTIMEAC/DC 8 digit timer with 10 yr battery

& High Voltage Input924KA* Counter, Rate, Timer; 90-260 VAC power924KB* Counter, Rate, Timer; 10-30 VDC power

*Add suffix 0 for relay outputs, 1 for opto-coupler outputs

42a

To Order—Insert Number Code for Each Letter to Select Catalog Number Order Example: 904K-A-0-A

A Basic Unit 903K Single Output 904K Dual Outputs

B Input VoltageA 115 VAC B 230 VAC C 11 to 30 VDC D 24 VAC E 48 VAC

C Outputs0 Relay 1 Opto-Isolated collector and emitter

D Options— Blank if None A Backlit LCD Display (904K only)

KEP Counter/Timer

LCD preset add/subtract counter, timer, frequency meter

903K/904K Series• 6-Digit Counter, Timer or

Frequency Meter

• 2 Preset Values (Type 903K 1 Preset)

• Input Scaling(0.0001 to 9.9999) Multiplier

• 2-Line LCD Display

• Count and Preset Range of -999999 to 999999

• Add or Subtract Count Control

• AC or DC Operation

• Secondary Preset Batch Counter (904K)

• 24 VDC to Power Peripherals

904K

SPECIFICATIONSDisplay: 6-digit, 2-line, 7 segment LCD with sign

Preset: Type 904 two preset values

Type 903 one preset value

Supply voltage: 115 VAC, 230 VAC, 48 VAC or 24 VAC

(tolerance ± 10%) or 11 to 30 VDC

Housing: 48 x 48 mm DIN

Protection: IP 65 (front)

Power Supply: 24 VDC, 80 mA

ORDERING INFORMATION

A – B – C – D

To Order—Insert Number Code for Each Letter to Select Catalog Number. Order Example: INT69RT-A-L-1-A-C1

A Basic Unit INT69RT Ratemeter/Totalizer INT69R Ratemeter Only INT69PM2 Process Monitor

Displays from -19999 to +49999 INT69T Totalizer Only

B Operating VoltageA 110 VAC ±15% or 12 to 24 VDCB 220 VAC ±15% or 12 to 24 VDC

C Inputs — Blank for INT69PM2 L Linear (standard)S Square Law (optional)

D Control Outputs1 2-Open Collector Outputs (standard) 2 2–10 Amp Form C Relays (optional)

E Options (Multiple Options Available)A Analog Output (4–20 mA)D Rate per Day, Hour or Minute C1 RS-232 communications C2 RS-422 communications

Intellect-69 Series• High/Low Scaling from Front Panel• 2 Set Points Assignable To Rate or Total• Display Rate (Pressure, Level, Watts, Etc.),

Peak and Valley and Integrated Total• 0–5V, 0–10V, 1–5V, 4–20 mA or 0–20 mA Analog Input • NEMA 4X/IP 65 Front Panel• +24V Output for Peripherals• RS-422/RS-232 Serial Communications• 4–20 mA Output• Square Root Extraction• Optional Rate Per Day Feature

KEP Totalizer/Rate MeterRatemeter/totalizer/process monitor from analog inputs

INT69RT

ORDERING INFORMATION

A – B – C – D – E