kasetsart university - o n e d u c a t i o n , r e s e a r c h a n d … · 2019-09-20 ·...

"STRENGTHENING COLLABORATIONON EDUCATION, RESEARCH AND INNOVATIONTOWARD THAILAND 4.0"

September 15th-17th ,2019

KASETSART UNIVERSITY

SRIRACHA CAMPUS

KU-SRIRACHAINTERNATIONAL FORUM 2019

1

Strengthening Collaboration on Education, Research and Innovation toward Thailand 4.0

KU-Sriracha International Forum 2019


“Strengthening Collaboration on Education, Research and Innovation toward Thailand 4.0”

September 15th -17th, 2019

Kasetsart University, Sriracha Campus

Chonburi, Thailand

Organized by

Faculty of Engineering at Sriracha

Co-organized by

Faculty of Science at Sriracha

Faculty of Economics at Sriracha

Office of Sriracha Campus

Objectives of the forum: Identification and discussion of potential cooperation in the fields of education, research and innovation. Leading to concrete proposals to jointly initiate and cooperate; for example, the establishment of a student exchange program, guest lectures (education), application for international research funding (research) or a Thai-German research-industry summit

Contact Information

Research and Innovation Center

Faculty of Engineering at Sriracha

Kasetsart Univiersity, Sriracha Campus, Thailand

Tel: +66(0)38 354 581-6 Ext. 662260-1

http://www.eng.src.ku.ac.th

http://www.eng.src.ku.ac.th/

2



CONTENTS

Welcome Messages…………………………………….…..…….....3

Program at a Glance………………………………….……..……..7

Program Schedule……………………………………..…….……..8

Speaker Biography…………………………………………….….12

Organizing Committee…………………………………….…...…24

3



Welcome Message Dean of Faculty of Engineering at Sriracha Kasetsart University, Sriracha Campus

Assoc.Prof.Dr. Sathaporn Chuepeng

It is my great pleasure to warm welcome all delegates to the KU-Sriracha

International Forum 2019 with the main theme of “Strengthening collaboration on

education, research and innovation toward Thailand 4.0.” The Forum is first held this year

by the Faculty of Engineering at Sriracha and co-hosted by the Faculty of Science at Sriracha,

the Faculty of Economics at Sriracha, and the Office of Sriracha Campus, Kasetsart University.

Preceding this forum, last year, the academic cooperation meeting among Kasetsart

University, Die Otto-von-Guericke-Universität Magdeburg, and Vocational Education

Institutes in eastern Thailand was held on 2nd and 3rd November 2018 at Kasetsart

University Sriracha Campus. By this occasion, I am looking forward to opportunity for

academic cooperation among institutions and wish all delegates to have a great time at

Kasetsart University and in Thailand.

4



Welcome Message Dean of Faculty of Science at Sriracha Kasetsart University, Sriracha Campus

Asst.Prof. Dr. Pattarawadee Sumthong Nakmee

On behalf of the Faculty of Science at Sriracha, I am very appreciated for the contribution of

this forum. The more we work together the most we get an efficiency which impact the society.

Base on Science and technology, up to Engineering and Economy, it can created the world

innovation helping by management science. The integration of those 4 subjects will completed the

knowledge application. This time is a good opportunity to share our own experiences and walk

together. I therefore wishing this forum a big success!

5



Welcome Message Dean of Faculty of Economics at Sriracha Kasetsart University Sriracha Campus

Asst.Prof. Dr. Supachat Sukharomana

It is an honor to welcome all delegates to the KU-Sriracha International Forum 2019,

“Strengthening Collaboration on Education, Research and Innovation toward Thailand 4.0”.

From this special occasion, I look forward to a great opportunity in creating networks

between the institutions. Innovation Economics is one of potential aspects that could be

strengthened together. I hope you enjoy the meeting and have a good time in Thailand.

6



Welcome Message Director of the Office of Sriracha Campus Kasetsart University, Sriracha Campus

Mr. Ugrit Manujantarat

On the occasion of Kasetsart University Sriracha Campus holding the KU-Sriracha

International Forum 2019 “ Strengthening collaboration on Education, Research and Innovation

toward Thailand 4.0” and on behalf of the Sriracha Campus Office, I would like to welcome all the

participants to our friendly and beautiful campus. I hope that this forum will be the platform to

build the network between participants, Universities and Industries. I wish you all to have a

wonderful time with this fruitful meeting.

7



Date/Time

15th September

16th September

17th September

8:30-12.00

- Registration - Opening Ceremony - Session 1:Technical Session

- Registration - Discussion and Future Collaboration in Education, Research and Innovation - Closing Ceremony

12:30-13:30

Lunch (Room 23508) Hosted by Office of Sriracha Campus

Lunch (Room 23508) Hosted by Faculty of Economics at Sriracha

13:30-17:30

- Session 2: Educational Session - Session 3: Research Session - Session 4: Innovation Session

- Research Facility Tour

18:00-20:00

Welcome Dinner at Mumaroi Restaurant Hosted by Faculty of Science at Sriracha (Invited Only)

Networking Banquet at Jae Chailay Restaurant (Sriracha)

Hosted by Faculty of Engineering at Sriracha

Program at a Glance

8



MONDAY September 16th, 2019

Venue: Building 23rd Faculty of Engineering at Sriracha , 1st floor

08:30- 09:00 Registration

09:00- 09:30 Opening Ceremony MC: Dr. Jiraporn Pradabwong

Report on the objectives of KU-Sriracha International Forum 2019: Assoc.Prof.Dr. Sathaporn Chuepeng Dean of Faculty of Engineering at Sriracha, Kasetsart University, Sriracha Campus

Welcome Remark: Dr.h.c. Sansanee Baroness von Enzberg KU Representative in Europe Assoc.Prof.Dr. Werasak Udomkichdecha Senior Advisor to President of National Science and Technology Development Agency (NSTDA) Assoc.Prof.Dr. Thanya Kiatiwat Vice President for Sriracha Campus, Kasetsart University, Sriracha Campus Assoc.Prof.Dr. Peerayuth Charnsethikul Dean of Faculty of Engineering, Kasetsart University Asst.Prof.Dr. Supachat Sukharomana Dean of Faculty of Economics at Sriracha, Kasetsart University Sriracha Campus Asst.Prof.Dr. Pattarawadee Sumthong Nakmee Dean of Faculty of Science at Sriracha, Kasetsart University Sriracha Campus

Congratulatory Speech: Asst.Prof.Dr. Denpong Soodphakdee, Vice President for Digital University Development, Khon Kaen University Assoc.Prof.Dr. Sumate Chaiprapat, Vice Dean of Faculty of Engineering, Prince of Songkla University

09:30- 09:40 Opening Ceremony: Dr.Chongrak Wachrinrat, Acting President, Kasetsart University

09:40- 10:00 Token and Photo Caption

10:00- 10:30 Coffee Break (hosted by Office of Sriracha campus)

10:30- 12:30 Session 1: Technical Session Session Chair: Dr.-Ing Sebastian Baron von Enzberg Keynote Speaker 1: Dr.-Ing. Arno Kühn and Mr.Martin Rabe (30minute) Fraunhofer Institute for Mechatronic Systems Design (IEM) , Paderborn, Germany Topic: Innovation Management and Systems Engineering for Digital Transformation in the Manufacturing Industry Keynote Speaker 2: Prof.Dr.Holger Karl (30 minute) Computer Network, Paderborn University, Paderborn, Germany Topic: 5G- Network Softwarization and Cloud Computing Invited Speaker 1: Asst.Prof.Dr. Putchong Uthayopas (10 minutes) Vice President for Information Technology, Kasetsart University, Thailand Topic: Designing a Shared HPC-AI Infrastructure Invited Speaker 2: Assoc.Prof. Arnon Rungsawang (10 minutes) Assistant to the President for Information Technology, Kasetsart University, Thailand Topic: A Study on Thai Internet’s Clickstream Data using Topological Data Analysis Invited Speaker 3: Mr. Kittisak Ngoenngokngam (10 minutes) SEA Business Director, Delta Electronics (Thailand) Public Company Limited, Thailand

9



Topic: Energy Storage Applications on Smart City Invited Speaker 4: Mr. Worapoj Ruenrerngwong, (10 minutes) CEO CHOSEN Energy Co.,Ltd., Thailand Topic: Electric Vehicle and Disruptive within 10 years Invited Speaker 5: Dr.-Ing Sebastian Baron von Enzberg (10 minute) Group Manager Production Management, Fraunhofer Institute for Mechatronic Systems Design IEM, Paderborn, Germany Topic: TBD

Q&A + Short Summary by Session Chair (10 minutes)

12:30- 13:30 Lunch (hosted by Office of Sriracha campus)

13:30- 14:30 Session 2: Educational Session Session Chair: Asst.Prof.Dr. Uthane Supatti Speakers: 1 Dr.-Ing. Arno Kühn and Mr.Martin Rabe Fraunhofer Institute for Mechatronic Systems Design (IEM), Paderborn, Germany (20 minutes) 2 Prof.Dr.Holger Karl Computer Network, Paderborn University (20 minutes) 3 Assoc. Prof.Dr Sumate Chaiprapat

Dean of Faculty of Engineering, Prince of Songkla University (10 minutes)

4 Assoc.Prof.Dr. Peerayuth Charnsethikul

Dean of Faculty of Engineering, Kasetsart University (10 minutes)

Short Summary by Session Chair

Guidelines for the Presentation

**Short Presentation of the ideas of every partner (KU, University of Paderborn, Fraunhofer IEM, etc.) for measures in the

field of education. - Which exchange programs for students already exist?

- Are there international study courses?

- In which context can guest lectures take place? Etc.

14:30 - 15:30 Session 3: Research Session Session Chair: Asst.Prof.Dr. Nattapon Chantarapanich Speakers: 1 Dr.-Ing. Arno Kühn and Mr.Martin Rabe Fraunhofer Institute for Mechatronic Systems Design (IEM), Paderborn, Germany (15 minute) 2 Prof.Dr.Holger Karl Computer Network, Paderborn University (15 minute) 3 Assoc.Prof.Dr. Siree Chaiseri Vice President for Research, Kasetsart University (10 minutes) 4 Asst.Prof.Dr. Kulwadee Somboonviwat Department of Computer Engineering (5 minutes) 5 Dr. Wason Tanjaroen Head of Power Electronic Applications and Energy Management (PEAEM) (5 minutes) 6 Assoc.Prof.Dr. Prechanon Kumkratug Head of Electric Power System Research Group (EPS) (5 minutes)

10



Short Summary by Session Chair (5 minutes) Guidelines for the Presentation **Short Presentation of the ideas of every partner (KU, University of Paderborn, Fraunhofer IEM, etc.) for measures in the field of research.

- What are the latest research topics?

- Which topics do we want to address in an international cooperation?

- What funding opportunities are there for international research?

15:30 – 16:00 Coffee Break (hosted by Office of Sriracha campus)

16:00 – 17:30 Session 4: Innovation Session Session Chair: Dr. Anuwat Attachaiyawuth Speakers: 1 Dr.-Ing. Arno Kühn and Mr.Martin Rabe Fraunhofer Institute for Mechatronic Systems Design(IEM), Paderborn, Germany (10 minute) 2 Prof.Dr.Holger Karl

Computer Network, Paderborn University, Germany (10 minute) 3 Mr. Anut Siripanya

Manager of Thai Summit Pkk Co.,Ltd. Topic: Condition based maintenance (10 minute)

4 Dr.Praj-ya Sungsomboon

President of Plus Strong Co., Ltd. Topic: Research and Innovation Development Platform for Thai SME (10 minute) 5 Asst.Prof.Dr. Chowarit Mitsantisuk

Department of Electrical Engineering, Faculty of Engineering, Kasetsart University (10 minute) 6 Asst.Prof.Dr. Nattapon Chantarapanich

Head of Digital Industrial Design and Manufacturing Research Group (DIDM) (10 minute)

7 Dr. Kittipong Yaovaja Head of Robotics and Advanced Autonomous Systems Research Group (RAAS)(10 minute)

8 Asst.Prof.Dr. Umarin Sangpanich

Head of Green-Smart Energy Technology Group (G-SET GROUP)(10 minute) 9 Dr. Rattapol Sakornsin

Head of Aerospace Innovation Research Group (AIRG) (10 minute)

Short Summary by Session Chair

Guidelines for the Presentation

**Short Presentation of the ideas of every partner (KU, University of Paderborn, Fraunhofer IEM, etc.) for measures in the field of innovation.

Which cooperation exist with companies and local industry?

What opportunities are there for cooperation between universities/research institutions and companies?

Are there funding opportunities for international innovation projects together with local industry?

Presentation of the Fraunhofer Innovation labs in Malaysia.

17:30 – 18:00 Summary of the day (by Asst.Prof.Dr. Uthane Supatti, Vice Dean for Research and Innovation, Faculty of Engineering at

Sriracha) 18:00 - 20:00 Conference Dinner (hosted by Faculty of Engineering at Sriracha) MC: Dr. Jiraporn Pradabwong

Venue: Jae Chailay Restaurant, Sriracha, Chonburi Transportation: by Provided Vans & Personal Vehicles

11



TUSEDAY September 17th, 2019

Venue: Building 23rd Faculty of Engineering at Sriracha , 1st floor

08:30 - 09:00 Registration

09:00 - 12:00 Discussion and future collaboration in Education Research and Innovation Session Chairs: Assoc.Prof.Dr. Sathaporn Chuepeng, Asst.Prof.Dr. Supachat Sukharomana Invited Speaker1: Asst.Prof.Dr. Korrakot Yaibuathet TIPPAYAWONG (20 minutes) Department of Industrial Engineering, Chiang Mai University Invited Speaker2: Asst.Prof.Dr. Denpong Soodphakdee (20 minutes) Vice President for Digital University Development, Khon Kaen University Invited Speaker3: Assoc. Prof.Dr. Chiranut Sa-ngiamsak (20 minutes) Deputy Dean for Research and International Affairs Faculty of Engineering, Khon Kaen University, Thailand

Session 1: Educational Session

Collecting ideas on a flipchart and discuss concrete next steps that can be taken to realize the measures.

Set up of a timeline for the measures Etc.

Session 2: Research Session Collecting ideas on a flipchart and discuss concrete next steps that can be taken to realize the measures

Definition of concrete project ideas for cooperative research projects

Set up of a timeline for the measures

Small Group Discussion on the research of interest between Germany and Thailand

In depth discussion in specific research Session 3: Innovation Session

Collecting ideas on a flipchart and discuss concrete next steps that can be taken to realize the measures

Definition of concrete ideas for cooperative innovation projects

Set up of a timeline for the measures

Summary and Further Plan **Coffee Break in between (hosted by Faculty of Economics at Sriracha)

12:00 - 12:20 Closing Ceremony MC: Dr. Jiraporn Pradabwong By Asst.Prof.Dr. Supachat Sukharomana Dean of Faculty of Economics at Sriracha, Kasetsart University, Sriracha Campus Assist.Prof.Dr. Pattarawadee Sumthong Nakmee Dean of Faculty of Science at Sriracha, Kasetsart University Sriracha Campus

12:20 - 13:30 Lunch (hosted by Faculty of Economics at Sriracha)

Research Facility Tour Session Chair: Asst.Prof.Dr. Sompop Jarungthammachote

13:30 - 14:30 1: Digital Industrial Design and Manufacturing Research Group (DIDM) 2: Robotics and Advanced Autonomous Systems Research Group (RAAS) 3: 5G

12



Dr.-lng. Arno Kühn Dr.-Ing. Arno Kühn is the Head of Product and Production Management at Fraunhofer IEM, Germany. He studied industrial engineering with a focus on mechanical engineering at the University of Paderborn (Germany) and the Lappeenranta University of Technology in Finland. Since 2012 he has been working at the Fraunhofer Institute for Mechatronics System Design IEM. He leads the department Product and Business Management, which focuses on the topics strategic product and technology planning in the context of digitization. Since 2012, he has been responsible for Industry 4.0 and technology transfer in the it's OWL excellence cluster, especially for small and medium-sized enterprises. In this function he manages the Paderborn office of the SME 4.0-Competence Center Dortmund.

Mr. Martin Rabe

Martin Rabe (M.Sc.) is an engineer and business development manager at Fraunhofer IEM based in Germany. He studied Industrial Engineering and Management at the University of Paderborn and the San Diego State University (USA). Martin draws on five years of consulting experience in the field of digital business models for manufacturing companies and designing innovative mechatronic systems. The topic of his doctoral thesis is the conception of Smart Services for manufacturing companies. Furthermore, Martin is consulting the it's OWL excellence cluster together with Arno Kühn in the area of Strategy, R&D. His focus is High-Tech Entrepreneurship for the Region OWL. In addition, he leads a project of Fraunhofer IEM in Malaysia with the aim to apply the Fraunhofer Research Model and open a local branch.

13



Prof.Dr. Holger Karl

Prof.Holger Karl has graduated from Karlsruhe University (now KIT) in 1996

and obtained a PhD from Humboldt-University of Berlin in 1999, both in

computer science. He spent his Post-Doc time at Technical University

Berlin, working on wireless communication, in particular, wireless sensor

networks. Since 2004, he is full professor at Paderborn University (UPB)

where he leads the Computer Networks group. His current research

interests are wireless networking, data center networking and network

function virtualization, with methods ranging from optimization

techniques to machine learning applied to these areas. His h-Index is 38 (as

of July 2019). Since 2017, he is also head of the Department of Computer

Science.

Asst.Prof.Dr. Putchong Uthayopas

Dr. Putchong Uthayopas is a Vice President for Information (CIO), Kasetsart University, Thailand where he is responsible for KU digital policy and digital strategy, digital transformation, and oversee the operation of the Office of Computing Services. Dr. Putchong has worked in high performance computing, grid, and cloud computing for more than 28 years and has published more than 160 papers in Journals and Conference Proceedings. He is one or the 2 Key Opinion Leaders for Thailand participating in ASEAN HPC Task Force under ASEAN Committee on Science and Technology. He is a recipient of the Distinguish Computer Engineer award in System Integration from the Engineering Institute of Thailand in 2012 for his contribution in Grid, HPC, and Cluster computing work.

14



Assoc.Prof. Arnon Rungsawang

Arnon Rungsawang received his Ph.D. in Computer Engineering from ENST-Paris, France in 1997. He is currently an Associate Professor in the department of computer engineering, faculty of engineering, Kasetsart University, Thailand. His research interests include Web Search, Social Network Mining, Data Analytics and Software Engineering.

Mr. Kittisak Ngoenngokngam

Delta Electronics (Thailand) Public Company Limited

I am South East Asia Business Development Director for Delta Electronics (Thailand) PCL., Samutprakarn, Thailand where I am working and station. More than 30-years experience in Power Electronic and Power Solution and especially Power Solution from renewable such as Solar system, Batteries Energy Storage Solution (BESS) and also EV Charging Solution. The responsibility taking care for the business development in term of Power Solution from renewable solution in South East Asia.

I was specialist in EMC and also Product Safety and also Research and Development Director who was doing the products research and development for power conversion products and Power Solution for Delta Electronics (Thailand) PCL., Samutprakarn, Thailand

15



Mr. Worapoj Ruenrerngwong

CEO of CHOSEN Technology CEO of CHOSEN Energy CEO of EV LAO - Master Degree in Computer Science (ABAC) - Founder of CHOSEN since 2001 (19 years) - DTAC Corporate Business Solution Partner - 1st Company in Thailand who import Internet AirCard - IT Solution Provider - IT Special Instructor at Thammasart University - Automation Inspection and Industry 4.0 - Found CHOSEN Energy for Energy 4.0 Solution Provider - Found and Develop EVen Charging Platform

Dr.-Ing Sebastian Baron von Enzberg

Sebastian von Enzberg has received the Diploma degree in Electrical Engineering from Otto-von-Guericke University Magdeburg, Germany. He received the Ph.D. at the Institute for Electronics, Signal Processing and Communications at Otto-von-Guericke University in 2018. He continued his academic work at Fraunhofer Institute for Mechatronic Systems Design IEM Paderborn, Germany and has been a research group manager since 2018.

His research interests lies on industrial data science, machine learning, signal and image processing with a strong focus on industrial applications. Next to the authorship of peer-reviewed international journals, conference publications and books, he is holder of an international patent which has been awarded with the „Hugo Junkers Award for Research and Innovation“.

16



Asst.Prof.Dr. Denpong Soodphakdee

Dr. Denpong Soodphakdee, Vice President for Digital University

Development of Khon Kaen University, is currently responsible for

development and oversight of, university digital technology

implementation. Dr. Soodphakdee has been working as a university

administrator focused on teaching and learning since 2002. He now

oversees digital transformation strategy, which allows him to more

effectively nurture technology in teaching, learning, working, and living. Dr.

Soodphakdee is a well-known academic for his long interest and

implementation of online learning for digital ages. His early adaptation of

eLearning for Khon Kaen University in 2003 is amongst the first in the

country. The open-source LMS, Moodle, has been used in KKU since his

initiative and widely used as a norm for KKU teaching and learning. Not

only focused on the IT side, he is also interested and working on learning

pedagogy for the new generation of learners, in particular.

Recently, he initiated a flipped classroom model for higher education

which has quickly become a big interest in Thailand. The flipped classroom

for online training is enabled by the availability of never ending

development of internet and internet-ready devices.

Assoc.Prof.Dr. Sumate Chaiprapat

Dr. Sumate Chaiprapat is an associate professor in environmental engineering at Prince of Songkla University, Thailand. He serves as the associate dean for research and international relations of the Faculty of Engineering, and the director of the Energy Systems Research Institute of Prince of Songkla University. Dr. Chaiprapat has coordinated various national-based research projects related to renewable energy and energy conservation in Thailand. He research interest lies in the area of waste management emphasizing on the applications of bioenergy technology for industrial and agriculture wastes. His current research include co-digestion of treated lignocellulosic residuals, high solid fermentation, anaerobic membrane process, and waste biorefinery. He has undertaken a role of co-designer of full-scale semi-solid digestion plants, and many biogas systems in Thailand. Based on his expertise and research overcome, the construction of biogas production and utilization system was installed in over 30 cooperative rubber sheet factories. He won the award of “Outstanding Researcher and Outreach Award of the Faculty of Engineer” in 2012, “Outstanding Extension Project with High Impact to Community from Thailand Senate Committee on Energy” in 2013 and “Outstanding Research Project from the Thailand Research Fund” in 2016. He has been involved in over twenty funded environmental engineering research projects. He has authored and co-authored multiple peer reviewed journal articles. His researches have been published in Bioresource Technology, Fuels, Journal of Environmental Management, Waste Management, Journal of Membrane Science, International Biodeterioration & Biodegradation, Energy Conversion and Management, etc.

17



Assoc.Prof.Dr. Peerayuth Charnsethikul

Dean of Faculty of Engineering

Kasetsart University, Bangkok, Thailand

Education

Ph.D. (Industrial Engineering) Texas Tech University, USA.

M.S. (Industrial Engineering) Texas Tech University, USA.

B.Sc (Electrical Engineering) Kasetsart University, Thailand

Assoc.Prof.Dr. Siree Chaiseri

Position

Vice President for Research, Kasetsart University

Associate Professor, Department of Food Science and Technology, Faculty of Agro-Industry, Kasetsart University

Education

Ph.D. (Food Science)1992 Pennsylvania State University, USA

M.S. (Food Science) 1987 Pennsylvania State University, USA

B.S. (Food Science) (Hon.) 1983Kasetsart University

Diploma (Confectionery Technology) 1998 Zentralfachschule der Deutschen Süßwarenwirtschaft, Solingen, Germany

Experiences: National

Member, National Innovation Board, National Innovation Agency (2018- present)

President, Agro-Industry Academic Council (2010-2012) International

Technical advisory committee member, Food and Fertilizer Technology Center for the Asian and Pacific region (FFTC, 2013-present)

International consortium committee member, Institute of Technology of Cambodia (2013-present)

International Academy of Food Science and Technology (IAFoST) Fellow (2016)

Outstanding Alumnus, College of Agriculture and Life Science, Pennsylvania State University (2014)

Area of Interest

Flavor chemistry of ASEAN foods and ingredients Confectionery technology

18



Asst.Prof.Dr. Kulwadee Somboonviwat

Kulwadee Somboonviwat is an Assistant Professor and a researcher of Green-Smart Energy Technology (G-SET) research group at the Faculty of Engineering at Sriracha, Kasetsart University Sriracha Campus in Thailand. She received a B.Eng. (First Hons.) Computer Engineering from King Mongkut’s Institute of Technology Ladkrabang in 2000, a M.Sc. and a Ph.D. in Information and Communication Engineering from the University of Tokyo in 2005 and 2008, respectively. She was a Specially-Appointed Associate Professor at the University of Electro-Communications in 2015, a visiting researcher at the Institute of Industrial Science, the University of Tokyo in 2012 and 2019, and a semi-postdoctoral researcher at the Institute of Industrial Science, the University of Tokyo in 2008. Her research interests include data mining, database systems, bioinformatics, and big data analytics. She is a consultant to industries specializing in the areas of database, data mining, and software development. She served as a Program Chair of ACIIDS 2014, and an external reviewer for the WWW Journal, Cluster Computing Journal, ACIIDS, and BESC conferences. She was awarded the Hitachi Research Fellowship in 2012, the Tonen International Scholarship from 2005 to 2008, the Panasonic Scholarship from 2002 to 2005, and the Siam Cement Talent Scholarship in 2000. Her current research projects focus on big data analytics for social media, shrimp genomics, and energy management.

Dr. Wason Tanjaroen

Head of research group of power electronic applications and energy management (PEAEM) Assistant Dean for Research and Innovation Faculty of Engineering at Sriracha Kasetsart University Sriracha Campus Education Doctor of Engineering, Electrical Engineering King Mongkut's Institute of Technology Ladkrabang, Bangkok, Thailand Research Areas Analog and Digital Signal Processing, Circuits Design, Electric Vehicles.

19



Assoc.Prof.Dr. Prechanon Kumkratug

Department of Electrical Engineering, Faculty of Engineering Kasetsart University Sriracha Campus

Education Doctor of Engineering, Kasetsart University, Thailand, 2008. Master of Engineering, Asian Institute of Technology, Thailand, 1999. Bachelor Degree in Engineering, King Mongkut’s Institute of Technology Ladkrabang, 1996. Research Interests Power Quality Analysis and Improvement, Power System Analysis, HVDC/FACTS devices, and Smart Grid System.

Mr. Anut Siripanya

Mr. Anut Siripanya is currently a manager for production department and senior engineer at Thai Summit PKK engineering Co. Ltd. who specialized on production line design and production platform development for automotive parts. He has experience over 10 years in private sectors. His highlight works includes total online production/decision management system, and condition based maintenance (CBM) which has been implemented to company’s production system. Mr. Siripanya also works on prediction of tooling life and tooling materials using computational tools such as finite element analysis, some of his work was published in international journal, and proceeding. For his education background, He receives his M.Eng. in Mechanical Engineering from Kasetsart University with B.Eng. in the same area from Mahasarakham university.

20



Dr. Praj-Ya Sungsomboon

Dr. Praj-Ya Sungsomboon is currently a Managing Director of Plus Strong Co. Ltd. who specialized on solution design for handicapped and health related equipment. He has been experienced over 15 years on varies engineering-related projects with business, public enterprises, and private consultation firms in Thailand. His investigation results from various projects have been achieved to government policy establishment. Dr. Sungsomboon received his Ph.D. in engineering from Sirindhorn International Institute of Technology with B.Eng. background in civil engineering from Kasetsart University. Apart from his business work, he is also a researcher who published over 10 research papers in international journals and proceedings. Dr. Sungsomboon also an inventor who hold a significant number of patent and copyright. His invention ranges from renewable energy, road safety equipment, and device for handicapped. With his notable services, he was bestowed two decorations, the Most Exalted Order of the White Elephant (forth class) and the Most Noble Order of the Crown of Thailand (forth class).

Asst.Prof.Dr. Chowarit Mitsantisuk

Chowarit Mitsantisuk received the B.Eng. degree in electrical engineering from Thammasat University, Thailand, in 2004, and the M.Eng. degree in Electrical, Electronics and Information Engineering and D.Eng degree in energy and environment science from the Nagaoka University of Technology, Japan, in 2007 and 2010, respectively. He was also a Postdoctoral Fellow of the Japan Society for the Promotion of Science. He joined the Kasetsart University, Thailand in 2012 as a lecturer and was promoted to assistant professor in 2015. Dr. Chowarit’s research interests lie mainly in robot-created artwork, human-robot collaboration system, haptics, tele-operated robot, and rehabilitation robot. Dr. Chowarit is a Member of the IEEE Industrial Electronics Society. He was the recipient of the IEEE-IES Student Scholarship Award at the IECON’09, Best Paper Award at the iEECON’17 and ECTI-CON’17 and Best Presentation Award at IECON’12. His work on the human-robot collaboration system won the 2nd place in 2017, 3rd place in 2018 Robot Art world-wide competition and the 1st place in 2018 MIT enterprise forum Thailand.

21



Asst.Prof.Dr. Nattapon Chantarapanich

Dr. Nattapon Chantarapanich is Head of Digital Industrial Design and Manufacturing Research Group (DIDM) and serves as assistant professor in mechanical engineering at Faculty of Engineering at Sriracha, Kasetsart University, who specialized on medical device design and product design. He has experience over 10 years in research and development career in private sector, research institute, and university. His main research projects includes implants for orthopaedics and cardiovascular system. All of his projects has been cooperated with leading hospitals, and private sectors. His products have been put in practice as well as licensed for commercialization. As an inventor, Dr. Chantarapanich hold a number of patent and copyright for his medical device product development. In 2015, he received silver award from 43rd International Exhibition of Inventions of Geneva for his invention. Apart from his medical device work, he also developed automation platform for industries, such as automotive and food. Dr. Chantarapanich published around 30 international journals, most of them indexed in ISI and Scopus database. For his education background, he receives his Ph.D. in Biomedical Engineering from Prince of Songkla University with B.Eng. background in Aerospace Engineering from Kasetsart University.

Dr. Kittipong Yaovaja

Current Position

Head of Robotics and Advanced Autonomous Systems Research Group, Kasetsart University

Lecturer, Department of Mechanical Engineering, Faculty of Engineering at Sriracha, Kasetsart University Sriracha Campus

Area of Interest

Robotics and Automatic Control

Intelligence System for Engineering Applications

Automotive Control Education D.Eng. (Mechanical Engineering) Kasetsart University, Thailand M.Eng. (Mechanical Engineering) Kasetsart University, Thailand B.Eng. (Mechanical Engineering) Kasetsart University, Thailand Experiences: Kasetsart University, Srirahca Campus

Lecturer (2015- present) Global Integrated Solution CO.,Ltd.

System Engineer/ Business Developer (Part-Time Employee) (2013- 2014)

Kasetsart University

Teaching-Research Assistant (Contractor) (2012- 2013) PTT Research & Technology Institute

Research Assistant (Contractor) (2008- 2011)

22



Asst.Prof.Dr. Umarin Sangpanich

Umarin Sangpanich is the Head of Green-Smart Energy Technology (G-SET) Research Group and an Assistant Professor at the Department of Electrical Engineering, Faculty of Engineering at Sriracha, Kasetsart University Sriracha campus in Thailand, where she has been since 2005. She was the Vice Dean of the Faculty of Engineering at Sriracha responsible for Research and International Relations from 2015 to 2019. She received her Ph.D. in Electronic and Electrical Engineering from the University of Strathclyde, Glasgow in the United Kingdom in 2013. Her research interests span energy storage management systems, renewable energy applications and power distribution systems. Much of her work has been on improving the understanding, design, performance and reliability of nanogrid and microgrid systems, mainly through the application of battery energy management, power electronics, and power systems. She also served as a consultant to industries in energy conservation. Her papers (with J. Thongpron, K. Kiratikara and C. Jivacate) “Study of moving cloud effects on the power quality of grid-connected photovoltaic system compared with simulation of PV power using a DC generator”, and (with O. Rewthong, B. Haruthaitanason, S. Thepa, P. Namprakai and K. Kiratikara) “Photovoltaic and solar thermal hybrid system using compound parabolic concentrator” received the Photovoltaic Science and Engineering Conference (PVSEC-14) Awards. Her paper (with K. L. Lo) “Design and Evaluation for Economic Feasibility of Wind Turbine and Photovoltaic Systems in Thailand” received the Thai Students Academic Conference in Europe 2012 Award from the Royal Thai Embassy. The G-SET research group has received the research funding from the Thailand Energy Conservation Fund, Energy Policy and Planning Office, Ministry of Energy since 2017 to do the research project of “A Nanogrid Photovoltaic Demonstration System by Using Innovation of Decentralized Group-Based Battery Energy Management (DBEM)”. The DBEM innovation has been designed and built to increase the energy efficiency and reliability of traditional stand-alone renewable energy systems, both grid-connected and non grid-connected, in power distribution systems. The aims of DBEM innovation are to prolong the battery lifetime and to minimize the loss of power supply, the cost of energy, and the waste of electrical energy.

23



Dr. Rattapol Sakornsin

2013 Ph.D. degree Optimization Wing like sea-bird for seaplane CFD analyze MAI (Moscow Aviation Institute) 2001 Bachelor’s & Master’s degree Structure and design airplane (design airplane business class 8 place) MAI (Moscow Aviation Institute) 1995 Bachelor’s degree Mechanical Eng. KBU (Thailand)

Asst.Prof.Dr. Korrakot Yaibuathet TIPPAYAWONG Deputy Head of Excellence Center in Logistics and Supply Chain Management (E-LSCM) Faculty of Engineering, Chiang Mai University, Thailand Dr. Tippayawong graduated with B.Eng., M.Eng. and Ph.D. in Industrial Engineering from Chiang Mai University, Thailand, Swinburne University of Technology, Australia, and Tokyo Institute of Technology, Japan, respectively. She has over 20 years’ experience in teaching, research and industrial consultation. Dr Tippayawong has worked with more than 300 SMEs as well as a number of large public and private enterprises. She is currently an Assistant Professor at Department of Industrial Engineering, Chiang Mai University. Her research focuses on logistics & supply chain, industrial engineering & management. She has received many major grants, including those from Thai Ministry of Industry, Ministry of Science and Technology, and European Horizon 2020 MSCA-RISE programme.

24



Organizing Committee

คณะกรรมการอ านวยการ 1. รองอธิการบดีวิทยาเขตศรีราชา ที่ปรึกษา

2. คณบดีคณะเศรษฐศาสตร์ ศรีราชา ที่ปรึกษา 3. คณบดีคณะวิทยาศาสตร์ ศรีราชา ที่ปรึกษา 4. คณบดีคณะวิศวกรรมศาสตร์ ศรีราชา ประธานคณะกรรมการ

5. ผู้ช่วยอธิการบดีฝ่ายสารสนเทศ กรรมการ 6. ผู้ช่วยอธิการบดีฝ่ายวิเทศสมัพันธ์และสื่อสารองค์กร กรรมการ 7. ผู้อ านวยการส านักงานวิทยาเขตศรีราชา กรรมการ 8. รองคณบดีฝ่ายวิจัยและนวัตกรรม กรรมการและเลขานุการ 9. นางสาวจริารักษณ์ เปรมสมบตั ิ กรรมการและผู้ช่วยเลขานุการ 10. นางสาวกัญญาฏา พวงมะล ิ กรรมการและผู้ช่วยเลขานุการ 11. นางสาวณัฐกานต์ แก้วมณ ี กรรมการและผู้ช่วยเลขานุการ 12. นางสาวไพลิน นลิชัย กรรมการและผู้ช่วยเลขานุการ

คณะกรรมการด าเนินงาน 1. รองคณบดฝี่ายวิจัยและนวตักรรม ประธานคณะกรรมการ 2. ผู้ช่วยศาสตราจารย์วีระยุทธ พิมพพ์าภร กรรมการ 3. นายอุดมพร ตุงคะศิร ิ กรรมการ 4. นางสาวจุฑาทิพย์ ร าเรือง กรรมการ 5. ผู้ช่วยศาสตราจารย์เกวลิน มะล ิ กรรมการ 6. รองคณบดฝี่ายพัฒนาองค์กร กรรมการ

Assoc. Prof.Dr. Chiranut Sa-ngiamsak Deputy Dean for Research and International Affairs Faculty of Engineering, Khon Kaen University, Thailand Education

PhD in Electrical Engineering and Electronics University of Manchester Institute of Science and Technology (UMIST), England M.Phil in Electrical Engineering University of Manchester, England B.Eng in Electrical Engineering Khon Kaen University, Thailand

25



7. รองคณบดฝี่ายวิชาการ กรรมการ 8. รองคณบดฝี่ายพัฒนานสิิต กรรมการ 9. รักษาการแทนรองคณบดฝี่ายพัฒนายุทธศาสตร ์ กรรมการ 10. ผู้ช่วยคณบดีฝ่ายวิชาการ กรรมการ 11. ผู้ช่วยคณบดีฝ่ายพัฒนานิสิต กรรมการ 12. ผู้ช่วยคณบดีฝ่ายเทคโนโลยสีารสนเทศ กรรมการ 13. ผู้ช่วยคณบดีฝ่ายกายภาพและสื่อสารองค์กร กรรมการ 14. ผู้ช่วยคณบดีฝ่ายวิเทศสมัพันธ์ กรรมการ 15. ผู้ช่วยคณบดีฝ่ายวิจัยและนวัตกรรม กรรมการ 16. ผู้ช่วยศาสตราจารยณ์ัฐพล จันทรพ์าณิชย ์ กรรมการ 17. นายสุจินต์ วันชาต ิ กรรมการ 18. ผู้ช่วยศาสตราจารย์อุมารินทร์ แสงพานิช กรรมการ 19. ผู้ช่วยศาสตราจารย์กลุวดี สมบูรณว์ิวัฒน์ กรรมการ 20. นายกิตติพงษ์ เยาวาจา กรรมการ 21. นางสาวชัชณี กลั่นสอน กรรมการ 22. นางจิรดาวัลย์ จรุงธรรมโชต ิ กรรมการ 23. นางสาวจตุพร เหรียญเจริญ กรรมการ 24. นางสาวณัฐกานต์ แก้วมณ ี กรรมการและเลขานุการ 25. นางสาวไพลิน นลิชัย กรรมการและผู้ช่วยเลขานุการ

คณะอนุกรรมการฝ่ายประชาสัมพันธ์ เอกสารและสิ่งพิมพ ์ 1. รักษาการแทนรองคณบดีฝ่ายพัฒนายุทธศาสตร์ ประธานคณะอนุกรรมการ 2. นายอนุวัฒน์ อรรถไชยวุฒิ อนุกรรมการ 3. นายพนมพร สาคร อนุกรรมการ 4. นายธิติ โรจนบวร อนุกรรมการ 5. นายวีรวัฒน์ แรเ่พชร อนุกรรมการ 6. นาย กิตติศักดิ์ อ่ิมสดุ อนุกรรมการ 7. นาย ธีระศักดิ์ โตวงค์ อนุกรรมการ 8. นางสาวรัตนาภรณ์ ธนิกกุล เลขานุการ คณะอนุกรรมการฝ่ายปฎิคม อาหาร และสถานที ่

1. ผู้ช่วยคณบดฝี่ายวิจัยและนวตักรรม ประธานคณะอนุกรรมการ 2. นายอลงกต โขมพัฒน์ อนุกรรมการ

3. นายพงษ์เทพ เจริญเชาว ์ อนุกรรมการ 4. นายวสันต์ สินธุยศ อนุกรรมการ 5. นายทีปกร แก้วสอางค ์ อนุกรรมการ 6. นายนิยม แสนมนตร ี อนุกรรมการ 7. นายคมสัน สุนันท์รุ่งอังคณา อนุกรรมการ 8. นายสถาปัต อารีวรพล อนุกรรมการ 9. นายธิติ โรจนบวร อนุกรรมการ

26



10. นายพงศธร ถมยา อนุกรรมการ 11. นายโสพณิ ปลอดเถาว์ อนุกรรมการ 12. นางกมลวรรณ พรหมทอง อนุกรรมการ 13. นางสาวพรพิมล พระสว่าง อนุกรรมการ 14. นายพงษ์ศักดิ์ พงษ์ปรีชา อนุกรรมการ 15. นางสาวศรรีัตน์ พงษ์เจรญิ อนุกรรมการ 16. นางสาวภัทรวดี ชูสินธ ์ อนุกรรมการ 17. นางปิยะวรรณ ปลอดเถาว์ อนุกรรมการ 18. นางสาวเศวยานันท์ เนินริมหนอง อนุกรรมการ 19. นางสาวจิรารักษณ์ เปรมสมบัติ อนุกรรมการ 20. นางสาวสุวรรณา โพธิอ่อน อนุกรรมการ 21. นางสาวจุฑาทิพย์ ร าเรือง อนุกรรมการ 22. นางสาวชัชณี กลั่นสอน อนุกรรมการ 23. นางสาวยุพิน รักเกียรติ ์ เลขานุการ คณะอนุกรรมการฝ่ายจัดหาทุน และวิทยากร 1. ผู้ช่วยศาสตราจารย์ณัฐพล จันทร์พาณิชย ์ ประธานคณะอนุกรรมการ

2. นายสจุินต์ วันชาต ิ อนุกรรมการ 3. นายกิตติพงษ์ เยาวาจา อนุกรรมการ 4. ผู้ช่วยศาสตราจารย์เชาวลติ มติรสันติสุข อนุกรรมการ 5. นายฉัตรชัย เกษมทวีโชค อนุกรรมการ 6. ผู้ช่วยศาสตราจารย์อุมารินทร์ แสงพานิช อนุกรรมการ 7. นางสาวณัฐกานต์ แก้วมณ ี เลขานุการ

คณะอนุกรรมการฝ่ายการเงิน 1. รองคณบดีฝ่ายพัฒนาองค์กร ประธานคณะอนุกรรมการ 2. นางสาวขวัญจติ โลหากาศ อนุกรรมการ 3. นางสาวสุกญัญา สว่างวงค์ อนุกรรมการ

4. นางสาวชลดัดา บูรณะ อนุกรรมการ 5. นางสาวจินตนา อินตรา อนุกรรมการ 6. นางสาววิลาวรรณ ชูแก้ว เลขานุการ

คณะอนุกรรมการฝ่ายต่างประเทศ 1. ผู้ช่วยคณบดฝี่ายวิเทศสัมพันธ์ ประธานคณะอนุกรรมการ

2. ผู้ช่วยศาสตราจารย์อุมารินทร์ แสงพานิช อนุกรรมการ 3. ผู้ช่วยศาสตราจารย์กุลวดี สมบรูณ์วิวัฒน์ อนุกรรมการ 4. นายอนุวัฒน์ อรรถไชยวุฒิ อนุกรรมการ 5. นางสาวณัฐกานต์ แก้วมณ ี อนุกรรมการ 6. นางสาวไพลิน นิลชัย เลขานุการ

kasetsart university - o n e d u c a t i o n , r e s e a r c h a n d … · 2019-09-20 ·...

Documents