Upload File

kamal cement test certificate

prev
next
out of 113
Download kamal cement test certificate

Upload: kuldeep-chakerwarti

Post on 30-May-2018

228 views

Category:

Documents


0 download

Report

TRANSCRIPT

  • 8/14/2019 kamal cement test certificate

    1/113

  • 8/14/2019 kamal cement test certificate

    2/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:52/08 of 2008 (29/12/2008) Issue date: 15/01/2009

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 307 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.040 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 190 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.5 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.51 Max 3.000

    4. Magnesia : % 1.62 Max 6.000

    5. Sulphuric Anhydride : % 2.14 Max 3.0006. Total Loss on Ignition : % 1.92 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    3/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    4/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:52/08 of 2008 (28/12/2008) Issue date: 06/01/2009

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 309 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.086 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.3 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.32 Max 3.000

    4. Magnesia : % 1.62 Max 6.000

    5. Sulphuric Anhydride : % 2.12 Max 3.0006. Total Loss on Ignition : % 1.92 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    5/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    6/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:52/08 of 2008 (27/12/2008) Issue date: 06/01/2009

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 301 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.044 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 36.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.68 Max 3.000

    4. Magnesia : % 1.70 Max 6.000

    5. Sulphuric Anhydride : % 1.90 Max 3.0006. Total Loss on Ignition : % 1.83 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    7/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    8/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:52/08 of 2008 (26/12/2008) Issue date: 06/01/2009

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 309 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.088 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 195 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.9 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.64 Max 3.000

    4. Magnesia : % 1.66 Max 6.000

    5. Sulphuric Anhydride : % 2.38 Max 3.0006. Total Loss on Ignition : % 1.92 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    9/113

  • 8/14/2019 kamal cement test certificate

    10/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:51/08 of 2008 (21/12/2008) Issue date: 06/01/2009

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 312 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.098 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.5 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.31 Max 3.000

    4. Magnesia : % 1.61 Max 6.000

    5. Sulphuric Anhydride : % 2.11 Max 3.0006. Total Loss on Ignition : % 1.75 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    11/113

  • 8/14/2019 kamal cement test certificate

    12/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:51/08 of 2008 (20/12/2008) Issue date: 29/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.082 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.5 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.9 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.63 Max 3.000

    4. Magnesia : % 1.67 Max 6.000

    5. Sulphuric Anhydride : % 2.27 Max 3.0006. Total Loss on Ignition : % 1.84 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    13/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    14/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:51/08 of 2008 (19/12/2008) Issue date: 29/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 293 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.072 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 175 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.44 Max 3.000

    4. Magnesia : % 1.65 Max 6.000

    5. Sulphuric Anhydride : % 2.40 Max 3.0006. Total Loss on Ignition : % 1.86 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    15/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    16/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:51/08 of 2008 (18/12/2008) Issue date: 29/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 307 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.076 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 190 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.06 Max 3.000

    4. Magnesia : % 1.60 Max 6.000

    5. Sulphuric Anhydride : % 2.55 Max 3.0006. Total Loss on Ignition : % 1.83 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    17/113

  • 8/14/2019 kamal cement test certificate

    18/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:51/08 of 2008 (17/12/2008) Issue date: 29/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.092 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.7 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.1 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.52 Max 3.000

    4. Magnesia : % 1.63 Max 6.000

    5. Sulphuric Anhydride : % 2.21 Max 3.0006. Total Loss on Ignition : % 2.03 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    19/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    20/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:51/08 of 2008 (16/12/2008) Issue date: 29/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 301 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.084 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.34 Max 3.000

    4. Magnesia : % 1.61 Max 6.000

    5. Sulphuric Anhydride : % 2.16 Max 3.0006. Total Loss on Ignition : % 2.04 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    21/113

    M/s. Simplex infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    22/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:50/08 of 2008 (15/12/2008) Issue date: 29/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 301 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.066 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 130 Min. 30.000

    (b) Final Set : Minutes 205 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.51 Max 3.000

    4. Magnesia : % 1.62 Max 6.000

    5. Sulphuric Anhydride : % 2.21 Max 3.0006. Total Loss on Ignition : % 1.86 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    23/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    24/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:50/08 of 2008 (14/12/2008) Issue date: 23/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 301 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.036 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.9 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.3 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.48 Max 3.000

    4. Magnesia : % 1.63 Max 6.000

    5. Sulphuric Anhydride : % 2.20 Max 3.0006. Total Loss on Ignition : % 1.92 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    25/113

  • 8/14/2019 kamal cement test certificate

    26/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:50/08 of 2008 (13/12/2008) Issue date: 23/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.028 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 205 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.9 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.62 Max 3.000

    4. Magnesia : % 1.61 Max 6.000

    5. Sulphuric Anhydride : % 1.93 Max 3.0006. Total Loss on Ignition : % 1.84 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    27/113

    M/s. Simplex infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    28/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:50/08 of 2008 (12/12/2008) Issue date: 23/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.098 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 130 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 36.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.34 Max 3.000

    4. Magnesia : % 1.60 Max 6.000

    5. Sulphuric Anhydride : % 1.85 Max 3.0006. Total Loss on Ignition : % 2.18 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    29/113

  • 8/14/2019 kamal cement test certificate

    30/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:50/08 of 2008 (11/12/2008) Issue date: 23/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 301 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.086 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.7 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.53 Max 3.000

    4. Magnesia : % 1.65 Max 6.000

    5. Sulphuric Anhydride : % 2.20 Max 3.0006. Total Loss on Ignition : % 1.94 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    31/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    32/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:48/08 of 2008 (30/11/2008) Issue date: 10/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 296 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.034 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 190 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.9 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.9 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.37 Max 3.000

    4. Magnesia : % 1.47 Max 6.000

    5. Sulphuric Anhydride : % 2.28 Max 3.0006. Total Loss on Ignition : % 1.97 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    33/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    34/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:48/08 of 2008 (29/11/2008) Issue date: 10/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.026 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.7 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.68 Max 3.000

    4. Magnesia : % 1.46 Max 6.000

    5. Sulphuric Anhydride : % 2.14 Max 3.0006. Total Loss on Ignition : % 1.94 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    35/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    36/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:48/08 of 2008 (28/11/2008) Issue date: 10/12/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 312 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.014 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 130 Min. 30.000

    (b) Final Set : Minutes 190 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.7 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.3 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.22 Max 3.000

    4. Magnesia : % 1.49 Max 6.000

    5. Sulphuric Anhydride : % 2.38 Max 3.0006. Total Loss on Ignition : % 2.14 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    37/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    38/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:46/08 of 2008 (17/11/2008) Issue date: 29/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 301 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.052 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 200 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.1 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.20 Max 3.000

    4. Magnesia : % 1.34 Max 6.000

    5. Sulphuric Anhydride : % 2.05 Max 3.0006. Total Loss on Ignition : % 1.95 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    39/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    40/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:46/08 of 2008 (16/11/2008) Issue date: 29/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 309 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.044 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 205 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.08 Max 3.000

    4. Magnesia : % 1.39 Max 6.000

    5. Sulphuric Anhydride : % 2.31 Max 3.0006. Total Loss on Ignition : % 2.03 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    41/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    42/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:46/08 of 2008 (15/11/2008) Issue date: 24/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 304 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.032 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 190 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.08 Max 3.000

    4. Magnesia : % 1.35 Max 6.000

    5. Sulphuric Anhydride : % 2.30 Max 3.0006. Total Loss on Ignition : % 1.92 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    43/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    44/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:46/08 of 2008 (14/11/2008) Issue date: 24/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 312 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.044 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 125 Min. 30.000

    (b) Final Set : Minutes 190 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.02 Max 3.000

    4. Magnesia : % 1.37 Max 6.000

    5. Sulphuric Anhydride : % 2.32 Max 3.0006. Total Loss on Ignition : % 2.18 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    45/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    46/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:46/08 of 2008 (13/11/2008) Issue date: 24/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 296 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.022 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.9 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.3 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.98 Max 3.000

    4. Magnesia : % 1.32 Max 6.000

    5. Sulphuric Anhydride : % 2.16 Max 3.0006. Total Loss on Ignition : % 1.96 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    47/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    48/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:46/08 of 2008 (12/11/2008) Issue date: 24/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 296 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.052 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.9 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.98 Max 3.000

    4. Magnesia : % 1.38 Max 6.000

    5. Sulphuric Anhydride : % 2.28 Max 3.0006. Total Loss on Ignition : % 2.06 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    49/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    50/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:46/08 of 2008 (11/11/2008) Issue date: 24/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 296 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.096 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.5 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.1 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.14 Max 3.000

    4. Magnesia : % 1.45 Max 6.000

    5. Sulphuric Anhydride : % 2.50 Max 3.0006. Total Loss on Ignition : % 2.30 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    51/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    52/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:45/08 of 2008 (10/11/2008) Issue date: 24/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.084 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.5 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 27.50 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.22 Max 3.000

    4. Magnesia : % 1.37 Max 6.000

    5. Sulphuric Anhydride : % 2.25 Max 3.0006. Total Loss on Ignition : % 2.44 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    53/113

    M/s. Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    54/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:44/08 of 2008 (03/11/2008) Issue date: 12/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 301 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.086 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.14 Max 3.000

    4. Magnesia : % 1.36 Max 6.000

    5. Sulphuric Anhydride : % 2.24 Max 3.0006. Total Loss on Ignition : % 2.36 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    55/113

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    56/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:44/08 of 2008 (02/11/2008) Issue date: 12/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.044 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 190 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.5 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.06 Max 3.000

    4. Magnesia : % 1.38 Max 6.000

    5. Sulphuric Anhydride : % 2.44 Max 3.0006. Total Loss on Ignition : % 2.42 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    57/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    58/113

  • 8/14/2019 kamal cement test certificate

    59/113

  • 8/14/2019 kamal cement test certificate

    60/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:44/08 of 2008 (31/10/2008) Issue date: 12/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 309 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.032 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 175 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.7 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.0 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.84 Max 3.000

    4. Magnesia : % 1.47 Max 6.000

    5. Sulphuric Anhydride : % 2.63 Max 3.0006. Total Loss on Ignition : % 1.87 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    61/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    62/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:39/08 of 2008 (23/09/2008 to 29/09/2008) Issue date: 4/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 311 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.065 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 195 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.0 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.4 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa 57.3 Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio 0.92 Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio 1.15 Min. 0.660

    3. Insoluble Residue : % 1.12 Max 3.000

    4. Magnesia : % 1.33 Max 6.000

    5. Sulphuric Anhydride : % 2.33 Max 3.0006. Total Loss on Ignition : % 2.38 Max 4.000

    : % 0.50

    8. Total Chlorides : % 0.026 Max 0.100

    9. Tricalcium Aluminate : % 5.97

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    63/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:43/08 of 2008 (24/10/2008) Issue date: 4/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 312 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.098 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 95 Min. 30.000

    (b) Final Set : Minutes 155 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.10 Max 3.000

    4. Magnesia : % 1.43 Max 6.000

    5. Sulphuric Anhydride : % 2.19 Max 3.0006. Total Loss on Ignition : % 2.04 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    64/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    65/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:43/08 of 2008 (23/10/2008) Issue date: 4/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 290 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.082 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.9 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.96 Max 3.000

    4. Magnesia : % 1.49 Max 6.000

    5. Sulphuric Anhydride : % 2.03 Max 3.0006. Total Loss on Ignition : % 1.93 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    66/113

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    67/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:43/08 of 2008 (22/10/2008) Issue date: 4/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 301 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.036 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 32.4 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.02 Max 3.000

    4. Magnesia : % 1.50 Max 6.000

    5. Sulphuric Anhydride : % 2.53 Max 3.0006. Total Loss on Ignition : % 1.86 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    68/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    69/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:43/08 of 2008 (21/10/2008) Issue date: 4/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 307 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.022 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 100 Min. 30.000

    (b) Final Set : Minutes 170 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 32.8 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.1 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.98 Max 3.000

    4. Magnesia : % 1.49 Max 6.000

    5. Sulphuric Anhydride : % 2.42 Max 3.0006. Total Loss on Ignition : % 1.83 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    70/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    71/113

  • 8/14/2019 kamal cement test certificate

    72/113

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    73/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:42/08 of 2008 (19/10/2008) Issue date: 4/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 304 Min. 531910.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.048 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 105 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.18 Max 3.000

    4. Magnesia : % 1.54 Max 6.000

    5. Sulphuric Anhydride : % 2.37 Max 3.0006. Total Loss on Ignition : % 1.71 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    74/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    75/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:42/08 of 2008 (17/10/2008) Issue date: 4/11/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.098 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 200 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 32.2 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 42.8 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.08 Max 3.000

    4. Magnesia : % 1.48 Max 6.000

    5. Sulphuric Anhydride : % 2.26 Max 3.0006. Total Loss on Ignition : % 2.32 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    76/113

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    77/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:42/08 of 2008 (16/10/2008) Issue date: 25/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 298 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.098 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 42.4 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.86 Max 3.000

    4. Magnesia : % 1.46 Max 6.000

    5. Sulphuric Anhydride : % 2.41 Max 3.0006. Total Loss on Ignition : % 1.84 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    78/113

  • 8/14/2019 kamal cement test certificate

    79/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:42/08 of 2008 (14/10/2008) Issue date: 25/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 309 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.020 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.5 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.03 Max 3.000

    4. Magnesia : % 1.38 Max 6.000

    5. Sulphuric Anhydride : % 2.32 Max 3.0006. Total Loss on Ignition : % 1.87 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    80/113

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    81/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:41/08 of 2008 (09/10/2008) Issue date: 18/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 317 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.044 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 32.6 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.3 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.48 Max 3.000

    4. Magnesia : % 1.41 Max 6.000

    5. Sulphuric Anhydride : % 2.32 Max 3.0006. Total Loss on Ignition : % 2.28 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    82/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    83/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:41/08 of 2008 (08/10/2008) Issue date: 18/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 325 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.064 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.7 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.3 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.42 Max 3.000

    4. Magnesia : % 1.42 Max 6.000

    5. Sulphuric Anhydride : % 2.34 Max 3.0006. Total Loss on Ignition : % 2.16 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    84/113

    Simplex infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    85/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:41/08 of 2008 (07/10/2008) Issue date: 18/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 309 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.072 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 170 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 32.6 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.0 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.91 Max 3.000

    4. Magnesia : % 1.43 Max 6.000

    5. Sulphuric Anhydride : % 2.64 Max 3.0006. Total Loss on Ignition : % 1.89 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    86/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    87/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:37/08 of 2008 (09/09/2008 to 15/09/2008) Issue date: 18/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 312 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.026 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 115 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.7 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.2 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa 57.7 Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio 0.91 Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio 1.17 Min. 0.660

    3. Insoluble Residue : % 1.16 Max 3.000

    4. Magnesia : % 1.38 Max 6.000

    5. Sulphuric Anhydride : % 2.32 Max 3.0006. Total Loss on Ignition : % 2.28 Max 4.000

    : % 0.50

    8. Total Chlorides : % 0.024 Max 0.100

    9. Tricalcium Aluminate : % 6.41

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    88/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:40/08 of 2008 (30/09/2008) Issue date: 18/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 307 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.082 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 105 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 43.1 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.19 Max 3.000

    4. Magnesia : % 1.57 Max 6.000

    5. Sulphuric Anhydride : % 2.39 Max 3.0006. Total Loss on Ignition : % 2.28 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    89/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    90/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:39/08 of 2008 (29/09/2008) Issue date: 18/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 304 Min. 225.002. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.084 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 185 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.3 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.000

    5. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 27.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.92 Max 3.000

    4. Magnesia : % 1.33 Max 6.000

    5. Sulphuric Anhydride : % 2.22 Max 3.000

    6. Total Loss on Ignition : % 2.32 Max 4.000: %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    91/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    92/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:39/08 of 2008 (27/09/2008) Issue date: 6/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 317 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.032 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 100 Min. 30.000

    (b) Final Set : Minutes 195 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.36 Max 3.000

    4. Magnesia : % 1.37 Max 6.000

    5. Sulphuric Anhydride : % 2.42 Max 3.0006. Total Loss on Ignition : % 1.90 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    93/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    94/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:39/08 of 2008 (25/09/2008) Issue date: 6/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 312 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.074 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 105 Min. 30.000

    (b) Final Set : Minutes 170 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.3 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.7 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.36 Max 3.000

    4. Magnesia : % 1.39 Max 6.000

    5. Sulphuric Anhydride : % 2.19 Max 3.0006. Total Loss on Ignition : % 2.61 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    95/113

    Simplex infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    96/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:39/08 of 2008 (23/09/2008) Issue date: 6/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 312 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 2.00 Max. 10.000

    (b) Autoclave Expansion : % 0.068 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 200 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 35.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 45.9 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 0.86 Max 3.000

    4. Magnesia : % 1.18 Max 6.000

    5. Sulphuric Anhydride : % 2.04 Max 3.0006. Total Loss on Ignition : % 2.68 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    97/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    98/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:38/08 of 2008 (22/09/2008) Issue date: 6/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 309 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.032 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 120 Min. 30.000

    (b) Final Set : Minutes 200 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 33.1 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.3 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.00

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.49 Max 3.000

    4. Magnesia : % 1.39 Max 6.000

    5. Sulphuric Anhydride : % 2.34 Max 3.0006. Total Loss on Ignition : % 2.52 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    99/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    100/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001 certified

    OHSAS 18001 certified ISO 14001 certified

    Week No:38/08 of 2008 (21/09/2008) Issue date: 6/10/2008

    Characteristic Unit Result RequirementAS PER IS: 12269 - 1987

    PHYSICAL REQUIREMENTS

    1. FINENESS

    Specific surface : 314 Min. 225.00

    2. SOUNDNESS

    (a) Le-Chatelier Expansion : mm 1.00 Max. 10.000

    (b) Autoclave Expansion : % 0.034 Max. 0.800

    3. SETTING TIME

    (a) Initial Set : Minutes 110 Min. 30.000

    (b) Final Set : Minutes 180 Max. 600.000

    4. COMPRESSIVE STRENGTH

    (a) 3 Days (72 +/- 1h) : MPa 34.9 Min. 27.000

    (b) 7 Days (168 +/- 2h) : MPa 44.9 Min. 37.000

    (c) 28 Days (672 +/- 4h) : MPa U.T. Min. 53.0005. Temp. during testing : 28.00 Min. 25.000

    Max. 29.000

    6. Standard Consistency : % 28.50

    CHEMICAL REQUIREMENTS

    1. Lime Saturation Factor : Ratio Min. 0.80

    Max. 1.020

    2. Alumina Iron Ratio Ratio Min. 0.660

    3. Insoluble Residue : % 1.26 Max 3.000

    4. Magnesia : % 1.32 Max 6.000

    5. Sulphuric Anhydride : % 2.55 Max 3.0006. Total Loss on Ignition : % 2.58 Max 4.000

    : %

    8. Total Chlorides : % Max 0.100

    9. Tricalcium Aluminate : %

    Issued To:

    Prepared By Authorised Signatory (QA)

    Works: Digvijaygram, Dist.: Jamnagar - 361140, Gujarat

    Tel: (0288) 2344016 - 19, Fax: (0288) - 2344092

    m2/ kg.

    oC

    7. Total Alkalies as Na2O

  • 8/14/2019 kamal cement test certificate

    101/113

    Simplex Infrastructures Ltd.

  • 8/14/2019 kamal cement test certificate

    102/113

    IMS/FIN/F 11

    Rev 01/01.04.08

    SHREE DIGVIJAY CEMENT CO. LTD., DIGVIJAYGRAM

    TEST CERTIFICATE OF 53 GRADE ORDINARY PORTLAND CEMENT

    ISO 9001


DR.Mustafa Kamal Ansari...Title: DR.Mustafa Kamal Ansari Author: CamScanner Subject: DR.Mustafa Kamal Ansari

Certified Portland Cement Concrete Technician …...Expiration Date Certificate No. Certified Portland Cement Concrete Technician Level II Program Director 12/31/20 EC163 DON E ALLBEE

Certificate of Registration Watertown Cement Division · 2016-12-20 · Certificate of Registration This certifies that the Quality Management System of Watertown Cement Division

Kamal presentation

Namita Kamal

Kamal & jamal

Kamal Main

Kamal Srutowana

Urea Kamal

Kamal Shruti

Kamal 2004

Kamal Degree

Kamal mobile

Kamal Sadaqah

Kamal Pkmp Kamal

Kamal Lochan

© FAO/Mohamed Kamal © FAO/Mohamed Kamal © FAO/Mohamed Kamal © FAO/Mohamed Kamal © FAO/Mohamed Kamal © FAO/Mohamed Kamal © FAO/Mohamed Kamal © FAO/Mohamed Kamal © FAO/Mohamed

Kamal yoga

Musthafa Kamal

Kamal 1986

kamal film

Kamal Sabri

Aquapanel Exterior Cement Board System€¦ · Certificate. 1.2 BUILDING REGULATIONS 1997 to 2014 REQUIREMENT: Part D – Materials and Workmanship D3 – Aquapanel Exterior Cement

Kamal industries

KAMAL PROE

08 week PSC TEST CERTIFICATE - JSWthe Future sys JSW CEMENT LTD., IS 455 CM/L-0004410342 Bilakalagudur IS: 455: 1989 TEST CERTIFICATE FOR PORTLAND SLAG CEMENT S.No. 1 2 3 4 6 2

Kamal Tabaja

Universal Plug and Play (UPnP) Presented by: Kamal Kamal Kamal Kamal Mohammad Atieh Mohammad Atieh

CERTIFICATE OF ANALYSIS FLX-CRM 130 Cement

Kamal 2013

Pratha kamal

Kamal Kiran

CERTIFICATE OF ANALYSIS FLX-CRM 113 Cement fileCERTIFICATE OF ANALYSIS FLX-CRM 113 Cement