ka-kak junction boxes - flintec · the type kak-4 junction box is designed to connect 3 or 4 load...
TRANSCRIPT
RoHScompliant IP66
junction boxes | KA-KAK | www.flintec.com D157-Rev1-GB ka-kak-e-jb-dat-en-1.0.0
KA-KAK junction boxes
product description
This family of painted aluminium junction boxes consist of 3 versions:
Junction box KA-4 is designed to connect 3 or 4 load cells in parallel. The cable connections are done by soldering, the corner trimming is done by resistors.
Junction box KA-6 is an extended version of KA-4 which can accommodate up to 6 load cell connections in parallel. It uses the same housing, but has a different printed circuit board and 2 more cable glands.
The type KAK-4 junction box is designed to connect 3 or 4 load cells in parallel. The cable connections are done with clamping terminals and the corner trimming by resistors and/or potentiometer.
One gland is sealed as indicated in the drawings. The junction boxes can be connected with a shielded 6-wire cable to the instrumentation
applications
Universal applications in weighing machinery, process weighing, test & measurement and process automation and control sectors.
key features
Painted aluminium construction
Environmental protection rated to IP66
3, 4 or 6 load cell connection
Connection for up to 4 load cells (KA-4, KAK-4) and 6 load cells (KA-6)
Cable connection with clamping terminals (KAK-4 only) respective by soldering (KA-4 and KA-6 only)
Compatible with 4 or 6 wire devices
Maximum cable diameter of 9mm
2junction boxes | KA-KAK | www.flintec.com D157-Rev1-GB ka-kak-e-jb-dat-en-1.0.0
Dimensions and specifications are subject to change without notice.
5x M16x1.5
Load Cell 1 LC 2 LC 3Output Cable
LC 4
Top viewwithout cover
Installation withM4 x 20
52
250
80 52
238
+OUTPUT
+EINGANG
+AUSGANG
–EINGANG
SCHIRM
+SENSE+RÜCKF
–RÜCKF
–AUSGANG
SHIELD
–SENSE
–INPUT
–OUTPUT
+INPUT
SCHIRM/SHIELD
SCHWARZ/BLACK
ROT/RED
WEIß/WHITE
GRÜN/GREEN
SCHIRM/SHIELD
SCHWARZ/BLACK
ROT/RED
WEIß/WHITE
GRÜN/GREEN
Corner trimming (4x).See Handbook.
One cable gland is sealed.Remove seal for
4 load cells application.
KA-4 product dimensions (mm)
KAK-4 product dimensions (mm)
NotesCable gland M16x1.5 for cable diameter 5...9 mm.