july 2019 projects - the artful inker · butterflies as shown onto the vellum piece, using glue...

July 2019 Projects Embossing Folder Techniques

Designed by:

Denita Wright-Smee

Eva Dobilas

Cheryll Miller

Danielle Bennenk

Sara Levin

The Stampin’ Up! Demonstrators creating Stamping Sunday tutorials live around the world. We

will reference 8-½” x 11” and A4 cardstock sizes.

Stamping Sunday Design Team

July 2019 Tutorial Bundle

Page 1 of 32

Bird Ballad Card Designed by: Denita Wright-Smee

http://denitawright.blogspot.com

Supplies:

Stamp set: Free as a Bird

Ink/Coloring Tools: Crumb Cake, Soft Suede, Jet Black Staz-On

Paper: Crumb Cake, Soft Suede, Bird Ballad Designer Series Paper

Tools: Pinewood Planks Textured Impressions Embossing Folder, Paper Snips, Sponge Daubers

Adhesives: Multipurpose Liquid Glue

http://denitawright.blogspot.com/



Page 2 of 32

Measurements - Metric ★ Soft Suede

○ Card Base: 21cm x 14.8 cm - scored and folded to 10.5cm x 14.8cm

★ Soft Suede ○ Layer 1: 9.7cm x 14cm

★ Crumb Cake ○ Card Front: 9.5cm x 13.8cm

★ Bird Ballad Designer Series Paper ○ 1 x Bird image, and 1 x flourish

Measurements - Imperial ★ Soft Suede

○ Card Base: 5-½” x 8-½” - scored and folded to 4-¼” x 5-½”

★ Soft Suede ○ Layer 1: 4-1/16” x 5-5/16”

★ Crumb Cake ○ Card Front: 4” x 5-¼”

★ Bird Ballad Designer Series Paper ○ 1 x Bird image, and 1 x flourish

Directions:

1. Stamp the sentiment on the Card front.



Page 3 of 32

2. Place the Card front into the Pinewood Planks Embossing Folder, and run through the

machine.

3. Apply Crumb Cake ink to the embossed image using a Sponge Dauber. Add touches of

Soft Suede ink around the edges of the cardstock.

4. Adhere the embossed card front to the Soft Suede mat.



Page 4 of 32

5. Choose an image from the Bird Ballad DSP, and fussy cut.



Page 5 of 32

6. Prior to adhering, place the images onto the card front for the layout. Adhere to the card

front.

7. Adhere the card front to the Soft Suede Card Base.



Page 6 of 32

8. The Gift tag was made the same way as the card. The twine is Whisper White Baker’s

Twine coloured with the Light Daffodil Delight Stampin’ Blends Marker.



Page 7 of 32

Hello To a Wild Rose Designed by: Eva Dobilas

www.ilovetostamp.com

Supplies:

Stamp set: To a Wild Rose, Birch Background

Ink/Coloring Tools: Soft Suede, Coastal Cabana, Flirty Flamingo, Melon Mambo, Mango Melody, Granny Apple Green

Paper: Whisper White, Coastal Cabana, Soft Sea Foam

Tools: Scripty 3D Embossing Folder, Wild Rose Dies, Stitched Nested Labels Dies, Stamparatus, Paper Snips, Stamping Sponges

Adhesives: Multipurpose Liquid Glue, Snail Adhesive, Mini Stampin’ Dimensionals

http://www.ilovetostamp.com/



Page 8 of 32

Measurements - Metric

★ Whisper White ○ Card Base: 21cm x 14.8 cm - scored and folded to 10.5cm x 14.8cm ○ Layer 2: 9.5cm x 13.8cm ○ Stamped flowers, leaves, die cut label and sentiment: 10.5cm x 14.8cm

★ Coastal Cabana ○ Layer 1: 10cm x 14.3cm ○ Die cut border: 5cm x 13.8cm

★ Soft Sea Foam ○ Die cut leaf: 5cm x 5cm

Measurements - Imperial ★ Whisper White

○ Card Base: 5-½” x 8-½” - scored and folded to 4-¼” x 5-½” ○ Layer 2: 3-¾” x 5” ○ Stamped flowers, leaves, die cut label and sentiment: 4-¼” x 4-½”

★ Coastal Cabana ○ Layer 1: 4” x 5-1/4” ○ Die cut border: 2” x 5”

★ Soft Sea Foam ○ Die cut leaf: 2” x 2”

Directions:

1. Stamp the Birch background stamp in Soft Suede on layer 2.

2. Emboss the stamped panel using the Scripty 3D Embossing Folder.



Page 9 of 32

3. Using a Stamping Sponge, add Coastal Cabana ink all over the stamped/embossed

panel.

4. Use a Wild Rose die to die cut the Coastal Cabana border.



Page 10 of 32

5. With the help of the Stamparatus, on the Whisper White panel stamp layer one of the

flower using Flirty Flamingo.

6. Stamp layer two of the flower, using Melon Mambo.



Page 11 of 32

7. Stamp the middle of the flower using Mango Melody.

8. On the same Whisper White panel stamp two leaves using Granny Apple Green ink.



Page 12 of 32

9. Die cut the flower and leaves.

10. Die cut the Stitched Nested Label, using the 3-¼” x 1-¾” (9.3cm x 4.45cm).



Page 13 of 32

11. Stamp the sentiment on the remaining Whisper White scrap and using Paper Snips, cut

it out.

12. Cut off the ends of the border, so it fits on layer 2.



Page 14 of 32

13. Adhere Layer 1 and 2 on the card base and the border using Snail Adhesive.

14. Die cut the small leaf using Soft Sea Foam.



Page 15 of 32

15. Build the floral centerpiece by adhering the leaves to the label using Liquid Glue and the

flower using Mini Stampin’ Dimensionals and adhere to the card front.

16. Adhere sentiment using Mini Stampin’ Dimensional on top of the flower.



Page 16 of 32

Hello Beautiful Designed by: Cheryll Miller

Your blog www.senseofwhimsy.com.au

http://www.senseofwhimsy.com.au/



Page 17 of 32

Supplies:

Stamp set (or bundle): Butterfly Gala

Ink/Coloring Tools: Crumb Cake and Rococo Rose Classic Inks, Jet Black Stazon Ink

Paper: Blushing Bride, Crumb Cake, Whisper White, Vellum Cardstock

Embellishments: Magnolia Lane Ribbon Combo Pack, Iridescent Sequin Assortment

Tools: Subtle 3D Embossing Folder, Layered Leaves 3D Embossing Folder, Stitched Nested Labels Dies, Butterfly Duet Punch, Blender Pen, Spritzer, Stamping Sponges, Take Your Pick Tool, Bone Folder

Adhesives: Tear & Tape, Multipurpose Liquid Glue, Mini Glue Dots, Stampin’ Dimensionals



Page 18 of 32

Measurements - Metric ★ Blushing Bride

○ Card Base: 21cm x 14.8cm - scored and folded to 10.5cm x 14.8cm

★ Crumb Cake ○ Layer 1: 10cm x 14.3cm

★ Whisper White ○ Layer 2: 8cm x 13.5cm ○ Stamped and Punched Butterflies: 12cm x 5cm

★ Vellum Cardstock ○ Central Panel: 6cm x 10cm

★ Magnolia Lane Ribbon Combo Pack - Linen Ribbon ○ 15cm for running across card ○ 25cm for bow

Measurements - Imperial ★ Blushing Bride


★ Crumb Cake ○ Layer 1: 4” x 5-¼”

★ Whisper White ○ Layer 2: 3-¼” x 5-¼” ○ Stamped and Punched Butterflies: 5” x 2”

★ Vellum Cardstock ○ Central Panel: 2-½” x 4”

★ Magnolia Lane Ribbon Combo Pack - Linen Ribbon ○ 6” for running across card ○ 10” for bow

Directions:

1. Score and fold the Blushing Bride cardstock to make a folded card.

2. Spritz the Crumb Cake cardstock lightly on one side and emboss with the Subtles 3D

Embossing Folder.



Page 19 of 32

3. Sponge lightly over the Crumb Cake embossed piece with Crumb Cake ink and a

Stamping’ Sponge, just to highlight the texture.

4. Emboss the same piece with the Layered Leaves 3D Embossing Folder. Set aside.

5. Die cut the largest Stitched Label from Whisper White cardstock. Spritz the die cut piece

lightly with water and emboss with the 3d Layered Leaves embossing folder, positioning

the label in the centre of the embossing folder.

6. Sponge over the Stitched Label embossed piece with Rococo Rose ink and a Stamping

Sponge until you are happy with the intensity of colour. The raised leaves will pick up the

ink. Set aside.



Page 20 of 32

7. Stamp the Hello Beautiful Sentiment onto the piece of Vellum as shown. Die Cut the

sentiment with the appropriately sized Stitched Label die, positioning the greeting in the

top part of the die.

8. Stamp two butterflies onto Whisper White cardstock with Stazon Jet Black ink. Once the

ink is totally dry, sponge over the butterflies with Crumb Cake ink. Colour sections of the

butterfly with Rococo Rose ink using a blender pen. Punch out the butterflies with the

Butterfly Duet Punch.

9. Stamp the butterfly body onto the butterflies using Stazon Jet Black Ink.



Page 21 of 32

10. To assemble the card, wrap the shorter piece of Linen Ribbon around the Crumb Cake

layer, using Tear & Tape to adhere in place on back of the layer. Adhere to the folded

card front with Multipurpose Liquid Glue.

11. Position all the layers as you would like them, without adhering. Adhere the two

butterflies as shown onto the Vellum piece, using glue dots only on the areas where they

will adhere to the Vellum.

12. Flip the vellum/butterfly piece over and apply glue dots to the vellum only where they will

be covered by the butterfly. Apply glue dots to the body and lower wings of the

butterflies. Adhere onto the Rococo Rose inked panel.

13. Flip the whole panel over and apply Stampin’ Dimensionals to the panel and the butterfly

wings that are showing. Adhere the piece centrally onto the card front.



Page 22 of 32

14. Tie a bow with the remaining Linen Ribbon and adhere to the card front with Glue Dots.

15. Adhere small light pink sequins to the card front. I use a toothpick to dot a very small

amount of glue onto card and then place the sequin on the glue using Take Your Pick

tool and the other end of sequin to position.



Page 23 of 32

‘One of a kind’ Swirl & Curl background Designed by: Danielle Bennenk

www.mrsbrightside.nl

http://www.mrsbrightside.nl/



Page 24 of 32

Supplies:

Stamp set: Sea Of Textures

Ink/Coloring Tools: Coastal Cabana, Bermuda Bay, Pacific Point and Night of Navy

Paper: Pacific Point, Coastal Cabana, Sahara Sand, Whisper White and Shimmery White cardstock

Embellishments: Woven Threads Sequin Assortment

Tools: Swirls & Curls embossing folder, Under the Sea dies, Stampin’ Spritzer and Die Cutting Machine

Adhesives: Multipurpose Liquid Glue, Fine Tip Glue Pen and Mini Stampin’ Dimensionals

Measurements - Metric ★ Pacific Point

○ Card Base: 21 cm x 14,5 cm - scored and folded to 10,5cm x 14,5 cm

★ Coastal Cabana ○ Layer 1: 10 cm x 14 cm

★ Shimmery White ○ Layer 2: 9,5 cm x 13,5 cm

★ Whisper White ○ Scrap for octopus and sentiment: approx. 9 x 9 cm

★ Sahara Sand ○ Scrap for netting: approx. 9 x 9 cm

Measurements - Imperial ★ Pacific Point


★ Coastal Cabana ○ Layer 1: 4-⅛” x 5-⅜”

★ Shimmery White ○ Layer 2: 4” x 5-¼”

★ Whisper White ○ Scrap for octopus and sentiment: approx. 3-½” x 3-½”

★ Sahara Sand ○ Scrap for netting: approx. 3-½” x 3-½”



Page 25 of 32

Directions:

1. Take Pacific Point base card, fold and burnish score line.

2. Adhere Coastal Cabana layer to the front of the base card with Multipurpose Liquid

Glue.

3. Take Swirls & Curls Embossing Folder, Coastal Cabana, Bermuda Bay, Pacific Point

Classic Stampin’ Pads and Stampin’ Spritzer.

4. Press the Coastal Cabana, Bermuda Bay, Pacific Point Classic Stampin’ Pads one by

one onto the raised edges of the Swirls & Curls embossing folder. Start with the lightest

color, then move to the darkest color.

5. Use the Stampin’ Spritzer to add water to the ink covered embossing folder, add the

Shimmery White cardstock layer to the ink covered embossing folder and fold closed.

Remove the cardstock carefully from embossing folder and let air dry.



Page 26 of 32

6. Adhere dried Shimmery White cardstock layer with Multipurpose Liquid Glue to the

Coastal Cabana layer on the base card.

7. Stamp the octopus from the Sea of Textures stamp set with Night of Navy ink on

Whisper White cardstock. Die cut the octopus with the Under the Sea dies.

8. Stamp the sentiment on a scrap of Whisper White cardstock with Pacific Point ink. Fussy

cut the sentiment.

9. Die cut the fish net from Sahara Sand cardstock with the Under the Sea dies. Take the

die cut and crumple it to create texture. Adhere the fish net to the Swirls & Curls

background with some Multipurpose Liquid Glue.

10. Add the octopus (Mini Stampin’ Dimensionals), the sentiment (Mini Stampin’

Dimensionals) and some Seaside Spray and Pretty Peacock Woven Threads Sequins

(Fine Tip Glue Pen) to finish off the card. See the picture of the complete project at the

start of this tutorial.



Page 27 of 32

Woodsy To a Wild Rose Designed by: Sara Levin

theartfulinker.com

http://theartfulinker.com/



Page 28 of 32

Supplies:

Stamp set (or bundle): To a Wild Rose (includes Wild Rose dies), Birch Background

Ink/Coloring Tools: Sahara Sand, Blushing Bride, Rococo Rose, Old Olive, Mossy Meadow

Paper: Blushing Bride, Mossy Meadow, Very Vanilla

Embellishments: Sahara Sand ⅝” Woven Threads Trim, Pearls

Tools: Lace 3D embossing folder, Paper Snips

Adhesives: Tear and Tape, Stampin’ Dimensionals, Multipurpose Liquid Glue

Measurements - Metric ★ Thick Very Vanilla

○ Card Base: 21cm x 14.8 cm - scored and folded to 10.5cm x 14.8cm

★ Mossy Meadow ○ Layer 1: 10.2cm x 14.5cm

★ Very Vanilla ○ Layer 2: 9.9cm x 14.2cm ○ Stamped/Die Cut Leaves and Flowers: 11cm x 16cm

★ Blushing Bride ○ Embossed Layer: 10.5cm x 5.8cm

Measurements - Imperial ★ Thick Very Vanilla


★ Mossy Meadow ○ Layer 1: 4-1/8” x 5-3/8”

★ Very Vanilla ○ Layer 2: 4” x 5-1/4” ○ Stamped/Die Cut Leaves and Flowers: 4-½” x 6”

★ Blushing Bride ○ Embossed Layer: 2-¼” x 4-¼”



Page 29 of 32

Directions:

1. Ink the Birch background stamp in Sahara Sand and stamp on the Very Vanilla layer.

Set it aside.

2. Stamp two of the three step roses from To a Wild Rose on Very Vanilla. Stamp 1:

Blushing Bride stamped off; Stamp 2: Rococo Rose stamped off; Stamp 3: Rococo

Rose. Tip: Line up the pointed petal for easy stamping. See photos.

3. Stamp three of the three step leaves on Very Vanilla. Stamp 1: Old Olive stamped off;

Stamp 2: Mossy Meadow stamped off; Stamp 3: Mossy Meadow.

4. Use the Wild Rose dies to cut out the roses and leaves.

5. Using the Lace embossing folder, place the Blushing Bride strip with a long edge lined

up with an embossing line. With your Paper Snips, trim the bottom of the embossed

scallops.

6. Adhere the embossed Blushing Bride to the Very Vanilla panel with Multipurpose Liquid

Glue.

7. Add a piece of Tear and Tape across the Blushing Bride about ½” (1cm) from the top.



Page 30 of 32

8. Adhere a piece of Sahara Sand ⅝” Woven Threads Trim. Clip the connecting thread at

the bottom and pull it out to create a fringe/mini tassels.

9. Trim any overhanging pieces on either side of the Very Vanilla panel.

10. Adhere the roses with Dimensionals. Use a double stack of Dimensionals on the right

side of the top flower.

11. Adhere the Very Vanilla panel to the Mossy Meadow layer with Multipurpose Glue.

12. Tuck in the leaves and adhere with Multipurpose Glue.

13. Adhere the layered panel to the card base with Dimensionals.

14. Accent with Pearls.



Page 31 of 32



Page 32 of 32

Tips for using Embossing Folders

● Spritz cardstock before embossing for a more distinct impression.

● Use a Sponge Dauber to selectively highlight embossed areas.

● Use a Stamping Sponge to apply color across more detailed embossing.

● Add color to the embossing folder to create a colored, embossed design.

● Spritz the color added to an embossing folder to create a “watercolor” embossed design.

● Cut the embossed panel by hand following the embossed design to create a uniquely

shaped layer.

Quick Note

We would love you to share your completed project with your friends and for you to tell them about the

Stamping Sunday Design Team Tutorial Bundle.

But please kindly keep the tutorial bundles for personal use.

Demo friends - please use the projects/techniques to teach in person. But, you may not copy/print or

email the tutorial for handouts. And you may not share measurements/details in demonstrator only

groups and forums.

These tutorials should not be shared, resold or reproduced in any way.

We are grateful for your support of our tutorial bundle and appreciate your respect of the time and

creativity needed to produce a quality product for you.

july 2019 projects - the artful inker · butterflies as shown onto the vellum piece, using glue...

Documents