j&p cycles- 0.0015" for proper oil psi at lifter pushrods flexing and hitting pushrod tubes...

2

Upload: others

Post on 09-Oct-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: J&P Cycles- 0.0015" for proper oil psi at lifter Pushrods flexing and hitting pushrod tubes - look for a shiny ring witness mark around pushrod normally seen up towards the cylinder
Page 2: J&P Cycles- 0.0015" for proper oil psi at lifter Pushrods flexing and hitting pushrod tubes - look for a shiny ring witness mark around pushrod normally seen up towards the cylinder