john deere golf products reel mowers … grass catcher side plate insert, rear catcher and bail...

21.0 hp (15.7 kW) at 3600 rpm,Engine Manufacturer Gross Power,Tested in accordance with SAEJ1995. The engine horsepowerand torque information areprovided by the enginemanufacturer to be used forcomparison purposes only.Actual operating horsepowerand torque will be less. Referto the engine manufacturer#sweb site for additionalinformation.

Foot Actuated Adjustable TiltSteering WheelDeluxe Seat2-Post SAE J21294 Roll OverProtection Structure with SeatBelts

Command Arm Operator ControlsFour Function LED WarningMonitor with Hour MeterOne Touch Hand Lift Lever

Hand Operated Mow/TransportLever

Direct Mounted PumpsPower SteeringHydrostatic DriveSingle Reel PumpHydraulic Reel MotorsOffset Reel DesignQuik-Tatch Cutting Units withAdjustable Extension Shields

Quick Adjust QA5 Cutting Unitswith Speed Link Height of CutSystem

Dual Point Adjustable Bed Knifewith Notch Adjustments

Double Upstops for Front CuttingUnits

Machined Grooved Solid FrontRollers with Solid End Caps and22 In. 2 In. (5 cm) DiameterWide Tube/Hollow Smooth RearRollers

Sit on Seat DiagnosticsWhite Box Controller

Micro-Lap Backlapping Valve andReel Speed ControlDisk BrakesHydraulic Oil Cooler18X10.50-10 2 Ply SmoothFloatation TiresSingle Fuel Tank, 7.9 Gallon(30L) Fuel CapacityBCI Group 40 Maintenance FreeBatteryJohn Deere Golf Operator Videosand All Products Safety VideoDVD Set

CODEATTACHMENTIDENTIFIER DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

Select One Code From Each Required Category

BASE MACHINEF.O.B. Raleigh, North Carolina

1205TC 2500B PrecisionCut Riding Greens Mower - Gas 33,187.00

REEL CUTTING UNITS1003 (3) Vertical Cutting Units With Front AND Rear Rollers

and Molded One-Piece Grass Catchers with large paddle clipand Grass Catcher Side Plate Insert, Rear catcher and bail systemRequires 2010 Code, Less Front Rollers.

-69.00

1004 (3) Quick Adjust 5 (QA5) Seven Blade 22 In. (55.9 cm)Heavy Section Cutting Units With Adjustable 4.8mm Bedknife,5 In. (12.7 cm) Diameter Reels and Molded One-Piece GrassCatchers with large paddle clip and Grass Catcher Side PlateInsert, Rear catcher and bail system, Less Front and Rear Rollers

-246.00

1005 (3) Quick Adjust 5 (QA5) Eleven Blade 22 In. (55.9 cm)Cutting Units With Adjustable 2.0mm Bedknife, 5 In. (12.7 cm)Diameter Reels and Molded One-Piece Grass Catchers withlarge paddle clip and Grass Catcher Side Plate Insert, Rearcatcher and bail system, Less Front and Rear Rollers

In Base Price

1010 Less Cutting Units and Grass Catchers with large paddle clip -7,498.00

REEL FRONT ROLLERS2001 (3) 22 In. 2 In. (5 cm) Diameter Wide Tube/Hollow

Smooth Front Rollers-216.00

2002 (3) 22 In. 2 In. (5 cm) Diameter Machined Grooved In Base Price

JOHN DEERE GOLF PRODUCTSREEL MOWERS

2500B PrecisionCut Riding Greens Mower - GasEquipment for Base Machine

15 April 2013 U.S.G-10- 18


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...Solid Front Rollers With Solid End Caps

2003 (3) 22 In. 3 In. (7.6 cm) Diameter Spiral GroovedFront Rollers with Spiral End CapsNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

456.00

2004 (3) 22 In. 2 In. (5 cm) Diameter Machined GroovedWide Solid Front Rollers

-18.00

2005 (3) 22 In. 2 In. (5cm) MT Spiral RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways.For best results install in front and rear roller location of cutting unit.

348.00

2006 (3) 22 In. 2 In. (5cm) MT Grooved RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways.For best results install in front and rear roller location of cutting unit.

348.00

2010 Less Front Rollers -684.00

REEL REAR ROLLERS2501 (3) 22 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth Rollers In Base Price

2502 (3) 22 In. 2 In. (5cm) MT Spiral RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

564.00

2503 (3) 22 In. 2 In. (5cm) MT Grooved RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

564.00

2510 Less Rear Rollers -468.00

WHEELS WITH TIRES (THREE)3001 (3) Smooth Floatation Tires and Wheels (18x10.50-10) In Base Price

3002 (3) Smooth Tires and Wheels (20x10.00-10) 11.00

3003 (3) Turf Guard Traction Tires and Wheels (20x10.00-10) 33.00

3004 (3) Smooth Tires and Wheels (20x10.00-10) 4 Ply RatedLowest Recommended Tire pressure 15 PSI (1.03 bar). Due to higher pressures may causemarking on soft greens.

11.00

3010 Less Wheels with Tires -425.00

REEL CUTTING UNIT COUNTER WEIGHTS4001 (3) Cutting Unit ONLY Counter Weight Kit

Needed if NOT installing Rear Roller Power Brush or GTC/FTC Kits.In Base Price

4002 (3) QA5 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on cutting unit.

216.00

4003 (3) QA5 Cutting Unit FTC/GTC ONLY Counter Weight KitNeeded if ONLY installing FTC/GTC on cutting unit.

Same Price


2500B PrecisionCut Riding Greens Mower - GasContinued

15 April 2013 U.S.G-10- 19


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...4010 Less Counter Weight kit

Ordered if Both Rear Roller Power Brush and FTC/GTC Kit Installed.-174.00

REEL CUTTING UNIT ATTACHING YOKES5001 (3) 22 Inch Cutting Unit Attaching Yokes

Needed to attach 2009 cutting units to 2009 traction machine.In Base Price

5002 (3) 22 Inch Cutting Unit Rear Attaching Point Yoke for FAIRWAYSThese yokes attach at the rear of the cutting unit and are for units used in fairwayapplications (not recommended for greens).

789.00

5010 Less Cutting Yokes -549.00

ATTACHMENTS - ORDER AS DESIREDCE Kit:

9330 Battery Label KitThis kit must be ordered to meet battery labeling requirement in Brazil.

No Charge

Cutting Units:9010 (3) QA5 22 In. Vertical Cutting Unit With Front

Roller Less Motor6,603.00

Miscellaneous:9015 (3) 22 In. Fairway Tender Conditioners (FTC) Shaft and Blades

Requires order code 9016.1,395.00

9016 (3) GTC/FTC Gear DriveRequires Order Code (9015 or 9020).

3,591.00

9017 (3) 22 In. Rear Roller Power BrushesRequires order code 9018.

396.00

9018 (3) Rear Roller Power Brush DriveRequires order code 9017.

1,083.00

9019 (3) 22 In. Front Rotary Turf BrushCannot be used with FTC/GTC.Also requires gear drive.

588.00

9020 (3) 22 In. Greens Tender Conditioner (GTC) Shaft and BladesRequires order code 9016.

792.00

9025 (3) Smooth Roller Scrapers 45.00

9070 (3) QA5 Grass Catcher Lip ExtensionThis kit extends the front lip of the Grass Catcher closer to the reel.

27.00

9115 Greens Mower Convenience KitContains Storage Area Pad and Elastic Storage Retainer.

74.00

9910 Leak Detector KitFor Serial No. TC250BG010001-.

1,301.00



15 April 2013 U.S.G-10- 20


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9801 (3) 22 In. Front Rotary DT Brush

Brush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

588.00

ATTACHMENTS FOR FIELD CONVERSIONBedknives

ET17532 Bedknife, 4.8mm Fairway See Parts

MT7351 Bedknife, 2.0mm Ultra Low Cut See Parts

ET17534 Bedknife, 2.5mm Tournament See Parts

ET17533 Bedknife, 3.2 mm See Parts

ET11066 Bedknife, 3.2 mm with Hardened Insert See Parts

ET17767 Bedknife, Hi-cut Fairway 7.6 mm See Parts

Cutting Units:BM22460 (1) QA5 22 In. Vertical Cutting Unit With Front


BM24130 (1) QA5 Eleven Blade 22 In. Cutting Unitw/Adjustable 2.0 mm Bedknife, Less Front and Rear Roller & Motor

2,379.69

BM24129 (1) QA5 Seven Blade 22 In. Heavy Section BladeCutting Unit With Adjustable 4.8 mm Bedknife, Less Yokes,Front and Rear Roller & Motor

2,291.94

European CE Kit:TCB11729 Compliance Kit

This kit must be ordered to meet the EU country of France shielding regulations.50.29

Miscellaneous:BM22671 (1) 22 In. Fairway Tender Conditioners (FTC) Shaft and Blades

Requires GTC/FTC Gear Drive (BM22469).497.56

BM22761 (1) 22 In. Front Rotary Turf Brush 209.71

BM22471 (1) 22 In. Greens Tender Conditioner (GTC) Shaft and BladesRequires GTC/FTC Gear Drive.

282.49

BM22668 (1) 22 In. Rear Roller Power BrushRequires Rear Roller Power Brush Drive (BM22527).

141.24

BM22995 (1) 22 In. Smooth Roller Scraper 16.06

BM22469 (1) GTC/FTC Gear Drive 1,280.79

BM24730 (1) QA5 22 In. Front Rotary DT BrushBrush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

209.71

BM23910 (1) QA5 Grass Catcher Lip ExtensionThis kit extends the front lip of the grass catcher closer to the reel.

9.63



15 April 2013 U.S.G-10- 21


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22527 (1) Rear Roller Power Brush Drive

Requires 22 In. Rear Roller Power Brush (BM22668).386.27

BTC10122 (3) 22 Inch Cutting Unit Rear Attaching Point Yoke Kit for FAIRWAYSThese yokes attach at the rear of the cutting unit and are for units used in fairwayapplications one (1) kit needed per machine.

1,431.66

TCA19547 2"x 22" Machine Grooved Roller Scraper See Parts

BM23002 3"X22" GROOVE ROLLER SCRAPERNot compatible with Fairway Tender Conditioners (FTC).Can be used on QA5 Cutting units by ordering (1) TCA19597for each scraper from parts. Requires 3 for 2500'sand 5 for Fairway mowers.

146.59

AMT2477 Arm Rest Kit (Includes One Arm Rest and Hardware) See Parts

BM23080 Cutting Unit Top Shield Extension (Set of 3) 84.53

TCB11356 Cutting Unit Yokes Kit (22") for MY1998-2008 817.49

TCB11341 Cutting Unit Yokes Kit for MY 2009 # Current or QA5 Cutting Units 587.43

BM19744 Dew Whip Holder Bracket 63.13

TCB11721 Grass Catcher Mounting KitMounting Hardware for complete machine.

143.39

BTC10216 Grass Catcher with large paddle clip (22 Low Profile)2 needed for complete machine for 2500#s.2 needed for rear locations for Fairway Mowers 7700/8700.1 needed for 180 & 220 E-Cut Hybrid Walk Greens Mower.

175.49

BM19739 Greens Mower Convenience KitContains Storage Area Pad and Elastic Storage Retainer.

79.19

AMT2978 Height of Cut Gauge Bar See Parts

TCB11710 Large E-Crate Cover See Parts

TCB11165 Leak Detector KitFor Serial No. TC250BG010001-Current Models

1,392.07

BM19746 Light Kit, Front 243.96

BM19852 Light Kit, Rear Grass CatcherMounting Hardware and Wiring with One Light.

53.50

BM24199 QA5 Grass Catcher Side Plate Insert2 Needed for complete machine 2500's.1 Needed for front center location for 7500/8500 Fairway Mowers.1 Needed for 180 & 220 E-Cut Hybrid Walk Greens Mowers.3 Needed for front 8000 E-Cut Hybrid Fairway Mower.

47.09

BTC10407 Rear Grass Catcher Bail KitMounting Bail needed for rear cutting unit 1 needed per machine.

153.01



15 April 2013 U.S.G-10- 22


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10408 Rear Grass Catcher with Handles

Requires 2 for complete machine & rear grass catcher bail system BTC10501.142.31

TCB11167 Third Wheel Assist Kit 2,455.66

BM19750 Tires and Wheels (18x10.50-10), (3) Smooth Floatation 454.76

BM19748 Tires and Wheels (20x10.00-10), (3) Smooth 466.51

BTC10071 Tires and Wheels (20x10.00-10), (3) Smooth 4 Ply-RatedLowest Recommended Tire pressure 15 PSI (1.03 bar). Due to higher pressures may causemarking on soft greens.

466.51

BM19749 Tires and Wheels (20x10.00-10), (3) Turf Guard Traction 490.06

Reel Cutting Unit Counter WeightsBM22762 (1) Cutting Unit ONLY Counter Weight Kit

Needed if NOT installing Rear Roller Power Brushor GTC / FTC Kits.

62.06

BM22705 (1) QA5 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brushon cutting unit.

139.10

BM22704 (1) QA5 FTC/GTC ONLY Counter Weight KitNeeded if ONLY installing FTC/GTC on cutting unit.

62.06

Rollers:BM18712 (1) 22 In. 2 In. (5 cm) Diameter Machined Grooved

Solid Front Roller With Solid End Caps243.96

BM18481 (1) 22 In. 2 In. (5 cm) Diameter Machined GroovedWide Solid Front Roller

237.54

BE23416 (1) 22 In. 2 In. (5 cm) Diameter Machined GroovedSolid Front RollerThis Roller is 20mm Shorter Than BM18481.

222.56

BM18480 (1) 22 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth RollerFor use on Greens.

166.91

BTC10267 (1) 22 In. 2 In. (5cm) MT Grooved Roller 368.09

BM17668 (1) 22 In. 3 In. (7.6 cm) Diameter Heavy DutyGrooved Disc Front RollerNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

335.99

BM19817 (1) 22 In. 3 In. (7.6 cm) Diameter Spiral GroovedFront Roller With Spiral End CapsNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

406.60

BM23566 (1) 2X22" MT SPIRAL RollerRoller used to help reduce roller overlaps in fairways. For best results install in front andrear roller location of cutting unit.

368.09



15 April 2013 U.S.G-10- 23

19.6 hp (14.6 kW) per SAE J1995Engine hp is provided by theengine manufacturer to be usedfor comparison purposes only.Actual operating hp will beless. Refer to the enginemanufacturer#s web site foradditional information.

Meets EPA Tier2, interim Tier 4Foot Actuated Adjustable TiltSteering WheelDeluxe Seat2-Post SAE J21294 Roll OverProtection Structure with SeatBelts

Command Arm Operator ControlsFour Function LED WarningMonitor with Hour MeterOne Touch Hand Lift LeverHand Operated Mow/TransportLever

Direct Mounted PumpsPower SteeringHydrostatic DriveSingle Reel PumpHydraulic Reel MotorsOffset Reel DesignQuik-Tatch Cutting Units withAdjustable Extension Shields




Machined Grooved Solid FrontRollers with Solid End Caps

22 In. 2 In. (5 cm) DiameterWide Tube/Hollow Smooth RearRollers

Sit on Seat DiagnosticsWhite Box Controller

Micro-Lap Backlapping Valve andReel Speed ControlDisk BrakesHydraulic Oil Cooler18X10.50-10 2 Ply SmoothFloatation TiresSingle Fuel Tank, 7.9 Gallon(30L) Fuel CapacityBCI Group 40 Maintenance FreeBatteryJohn Deere Golf Operator Videosand All Products Safety VideoDVD Set


SUGGESTEDLIST PRICE

USD ($)



1184TC 2500B PrecisionCut Riding Greens Mower - Diesel 39,144.00


and Molded One-Piece Grass Catchers with large paddle clipand Grass Catcher Side Plate Insert, Rear catcher and bail system

-69.00


-246.00


In Base Price




2002 (3) 22 In. 2 In. (5 cm) Diameter Machined GroovedSolid Front Rollers With Solid End Caps

In Base Price


2500B PrecisionCut Riding Greens Mower - DieselEquipment for Base Machine

15 April 2013 U.S.G-10- 24


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...2003 (3) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved

Front Rollers with Spiral End CapsNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

456.00


-18.00


348.00


348.00




564.00


564.00






11.00





216.00


Same Price

4010 Less Counter Weight kitOrdered if Both Rear Roller Power Brush and FTC/GTC Kit Installed.

-174.00


2500B PrecisionCut Riding Greens Mower - DieselContinued

15 April 2013 U.S.G-10- 25


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...




789.00




No Charge



European CE Kit9100 European CE Conversion Kit for 2500B Riding Greens Mower - Diesel

Must be Ordered to Receive a 2500B Riding Greens Mower - DieselWhich Meets CE Mark Requirements. Kit Includes Locking HoodLatch, Pictorial Decals and Operator's Manuals in English,French, German, Spanish and Italian.

20.00

9101 European CE Conversion Kit for 7 and 11 Blade Cutting UnitsMust be ordered to receive decals that convert (3) 7 or 11 Blade Cutting Units to meet CEMark requirements.

No Charge

9350 Compliance KitThis kit must be ordered to meet the EU country of France shielding regulations.

47.00



9016 (3) GTC/FTC Gear DriveRequires order code 9015.

3,591.00


396.00


1,083.00


588.00


792.00




15 April 2013 U.S.G-10- 26


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9070 (3) QA5 Grass Catcher Lip Extension

This kit extends the front lip of the Grass Catcher closer to the reel.27.00


74.00


1,301.00

9801 (3) 22 In. Front Rotary DT BrushBrush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

588.00











2,379.69


2,291.94

Engine:TCA19916 B20 Biodiesel Conversion Kit

This kit converts one machine to use B20 Diesel fuel.See Parts







282.49



15 April 2013 U.S.G-10- 27


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22668 (1) 22 In. Rear Roller Power Brush

Requires Rear Roller Power Brush Drive (BM22527).141.24




209.71


9.63

BM22527 (1) Rear Roller Power Brush DriveRequires 22 In. Rear Roller Power Brush (BM22668).

386.27


1,431.66



146.59







143.39


175.49


79.19




1,392.07




15 April 2013 U.S.G-10- 28


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM19852 Light Kit, Rear Grass Catcher

Mounting Hardware and Wiring with One Light.53.50


47.09


153.01

BTC10408 Rear Grass Catcher with HandlesRequires 2 for complete machine & rear grass catcher bail system BTC10501.

142.31





466.51




62.06


139.10


62.06




237.54


222.56


166.91




15 April 2013 U.S.G-10- 29


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM17668 (1) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty

Grooved Disc Front RollerNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

335.99


406.60


368.09



15 April 2013 U.S.G-10- 30

21.0 hp (15.7 kW) at 3600 rpm,Engine Manufacturer Gross Power,Tested in accordance with SAEJ1995. The engine horsepowerand torque information areprovided by the enginemanufacturer to be usedfor comparison purposes only.Actual operating horsepower andtorque will be less. Refer tothe engine manufacturers website for additional information.


Command Arm Operator ControlsFour Function LED WarningMonitor with Hour MeterOne Touch Hand Lift Lever

Hand Operated Mow/TransportLever

Direct Mounted PumpsPower SteeringHydrostatic DriveSingle Reel PumpElectric Reel MotorsOffset Reel DesignQuik-Tatch Cutting Units withAdjustable Extension Shields





22 In. 2 In. (5 cm) DiameterWide Tube/Hollow SmoothRear Rollers

Sit on Seat Diagnostics

White Box ControllerMicro-Lap Backlapping Valve andReel Speed ControlDisk BrakesHydraulic Oil Cooler18X10.50-10 2 Ply SmoothFloatation TiresSingle Fuel Tank, 7.9 Gallon(30L) Fuel CapacityBCI Group 40 Maintenance FreeBatteryJohn Deere Golf Operator Videosand All Products Safety VideoDVD Set


SUGGESTEDLIST PRICE

USD ($)



1215TC 2500E E-Cut Hybrid Riding Greens Mower - Gas 34,610.00



-69.00


-246.00


In Base Price





In Base Price


2500E E-Cut Hybrid Riding Greens Mower - GasEquipment for Base Machine

15 April 2013 U.S.G-10- 31


SUGGESTEDLIST PRICE

USD ($)



456.00


-18.00


348.00


348.00




564.00


564.00






11.00





216.00

4003 (3) QA5 Cutting Unit FTC/GTC ONLY Counter Weight Kit Same Price


2500E E-Cut Hybrid Riding Greens Mower - GasContinued

15 April 2013 U.S.G-10- 32


SUGGESTEDLIST PRICE

USD ($)






789.00




No Charge






3,591.00


396.00


1,083.00


588.00


792.00


9070 (3) QA5 Grass Catcher Lip ExtensionThis kit extends the front lip of the Grass Catcher closer to the reel.

27.00


74.00


1,301.00



15 April 2013 U.S.G-10- 33


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9801 (3) 22 In. Front Rotary DT Brush

Brush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

588.00











2,379.69


2,291.94







282.49


141.24




209.71


9.63



15 April 2013 U.S.G-10- 34


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22527 (1) Rear Roller Power Brush Drive

Requires 22 In. Rear Roller Power Brush (BM22668).386.27


1,431.66



146.59







143.39


175.49


79.19




1,392.07


BM19852 Light Kit, Rear Grass CatcherMounting Hardware and Wiring with One Light.

53.50


47.09


153.01



15 April 2013 U.S.G-10- 35


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10408 Rear Grass Catcher with Handles

Requires 2 for complete machine & rear grass catcher bail system BTC10501.142.31





466.51




62.06


139.10


62.06




237.54


222.56


166.91



335.99


406.60


368.09



15 April 2013 U.S.G-10- 36

19.6 hp (14.6 kW) per SAE J1995Engine hp is provided by theengine manufacturer to be usedfor comparison purposes only.Actual operating hp will beless. Refer to the enginemanufacturer#s web site foradditional information.


Command Arm Operator ControlsFour Function LED WarningMonitor with Hour MeterOne Touch Hand Lift LeverHand Operated Mow/TransportLeverDirect Mounted Pumps

Power SteeringHydrostatic DriveSingle Reel PumpElectric Reel MotorsOffset Reel DesignQuik-Tatch Cutting Units withAdjustable Extension Shields





22 In. 2 In. (5 cm) DiameterWide Tube/Hollow SmoothRear Rollers

Sit on Seat DiagnosticsWhite Box ControllerMicro-Lap Backlapping Valve and

Reel Speed ControlDisk BrakesHydraulic Oil Cooler18X10.50-10 2 Ply SmoothFloatation TiresSingle Fuel Tank, 7.9 Gallon(30L) Fuel CapacityBCI Group 40 Maintenance FreeBatteryJohn Deere Golf Operator Videosand All Products Safety VideoDVD Set


SUGGESTEDLIST PRICE

USD ($)



1194TC 2500E E-Cut Hybrid Riding Greens Mower - Diesel 40,592.00



-69.00


-246.00


In Base Price





In Base Price


2500E E-Cut Hybrid Riding Greens Mower - DieselEquipment for Base Machine

15 April 2013 U.S.G-10- 37


SUGGESTEDLIST PRICE

USD ($)



456.00


-18.00


348.00


348.00




564.00


564.00






11.00





216.00



2500E E-Cut Hybrid Riding Greens Mower - DieselContinued

15 April 2013 U.S.G-10- 38


SUGGESTEDLIST PRICE

USD ($)






789.00




No Charge



European CE Kit9100 European CE Conversion Kit for 2500E Hybrid Riding GreensMower - Diesel

Must be ordered to receive a 2500E Hybrid Riding GreensMower - Diesel which meets CEMark requirements. Kit includes Locking Hood Latch, Pictorial Decals and Operator'sManuals in English, French, German, Spanish and Italian.

20.00

9101 European CE Conversion Kit for 7 and 11 Blade Cutting UnitsMust be ordered to receive decals that convert (3) 7 or 11 Blade Cutting Units to meet CEMark requirements.

No Charge


47.00




3,591.00


396.00


1,083.00


588.00


792.00




15 April 2013 U.S.G-10- 39


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9070 (3) QA5 Grass Catcher Lip Extension

This kit extends the front lip of the Grass Catcher closer to the reel.27.00


74.00


1,301.00

9801 (3) 22 In. Front Rotary DT BrushBrush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

588.00











2,379.69


2,291.94









282.49



15 April 2013 U.S.G-10- 40


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22668 (1) 22 In. Rear Roller Power Brush

Requires Rear Roller Power Brush Drive (BM22527).141.24




209.71


9.63


386.27


1,431.66



146.59







143.39


175.49


79.19




1,392.07




15 April 2013 U.S.G-10- 41


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM19852 Light Kit, Rear Grass Catcher

Mounting Hardware and Wiring with One Light.53.50


47.09


153.01

BTC10408 Rear Grass Catcher with HandlesRequires 2 for complete machine & rear grass catcher bail system BTC10501.

142.31





466.51




62.06


139.10


62.06




237.54


222.56


166.91




15 April 2013 U.S.G-10- 42


SUGGESTEDLIST PRICE

USD ($)


Grooved Disc Front RollerNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

335.99


406.60


368.09



15 April 2013 U.S.G-10- 43

*Engine HP is Provided by theEngine Manufacturer to be Usedfor Comparison Purposes Only.Actual Operating HP will beLess. Refer to the enginemanufacturer#s web site foradditional information.

19.6 HP* (14.6 kW) Gross Per SAEJ1995 @ 3000 RPM (19.1, 14.2 kWNet Per SAE J1349 @ 3000 RPM)Liquid Cooled Three Cylinder IDIDiesel Engine2 Post SAE J21294 Roll OverProtection Structure with SeatBelts2 Pedal Foot Controlled

Hydrostatic DriveHydraulic Reel MotorsSingle Reel PumpMicro-Lap Backlapping ValveOil Cooler3WD GRIP AWD Traction SystemPower Steering20x10-10.00 Front Turf Tires20x10-8.00 Rear Turf TiresHour MeterOn Board Diagnostic White BoxController

Four Function LED WarningMonitor

7.4 Gallon (28 L) Fuel CapacityBCI Group 40 Maintenance FreeBattery

Less Cutting Units, FrontLift Arms, Front Rollers andSeat

John Deere Golf Operator Videosand All Products Safety VideoDVD Set


SUGGESTEDLIST PRICE

USD ($)



1223TC 2653B PrecisionCut Trim and Surrounds Mower 24,124.00

REEL CUTTING UNITS26 Inch E.S.P. Cutting Units:Includes Front Lift Arms and Yokes.

1001 (3) QA7 Five Blade 26 In. Cutting Units 7,356.00

1006 (3) QA7 Eight Blade 26 In. Cutting Units with 6.3 mm bedknife 7,797.00

30 Inch E.S.P. Cutting Units:Includes Front Lift Arms and Yokes.

1007 (3) QA7 Five Blade 30 In. Cutting Units 8,558.00

1008 (3) QA7 Eight Blade 30 In. Cutting Units 9,113.00

1010 Less Cutting Units, Front Lift Arms and Yokes In Base Price

REEL FRONT ROLLERS26 Inch Front Rollers:

2001 (3) 3 In. (7.6 cm) Diameter Heavy Duty SmoothSolid Front Rollers

945.00

2002 (3) 3 In. (7.6 cm) Diameter Heavy Duty GroovedDisc Front Rollers

1,092.00

2003 (3) 3 In. (7.6 cm) Diameter Spiral Grooved Front RollersWith Spiral End Caps

1,284.00


2653B PrecisionCut Trim and Surrounds MowerEquipment for Base Machine

15 April 2013 U.S.G-10- 44


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...30 Inch Front Rollers:

2004 (3) 3 In. (7.6 cm) Diameter Heavy Duty Smooth SolidFront Rollers

1,344.00

2005 (3) 3 In. (7.6 cm) Diameter Heavy Duty Machined GroovedDisc Front Rollers

1,491.00


1,683.00

2010 Less Front Rollers In Base Price

SEATS3001 Deluxe Suspension Seat with Armrest 747.00

3002 Standard Seat 413.00

3010 Less Seat In Base Price


Needed for ALL 30" Cutting units and if NOTinstalling Rear Roller Power Brush or GTCKits on 26" Cutting Unit.

In Base Price

4002 (3) Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on 26" Cutting Unit.

216.00

4003 (3) FTC/GTC ONLY Counter Weight KitNeeded if ONLY installing FTC on 26" cutting unit.

Same Price

4010 Less Counter Weight kitOrdered if Both Rear Roller Power Brush and FTC Kit installed on 26" Cutting Unit.

-174.00



No Charge

European CE Kit:9100 European CE Conversion Kit for 2653B Trim and Surrounds Mower

Must be Ordered to Receive a 2653B Mower Which MeetsCE Mark Requirements. Kit Includes Locking Hood Latch,Pictorial Decals and Operator's Manuals in English,French German, Spanish and Italian.

20.00

9101 European CE Conversion Kit for 26 In. and 30 In. Cutting UnitsMust be Ordered to Receive Decals that Convert (3) 26 In. or30 In. Cutting Unit to Meet CE Mark Requirements.

No Charge

Miscellaneous:9000 Grass Catchers with Mounting Hardware for 26 Inch Cutting Unit

(Set of 3)Not Compatible if Rear Roller Power Brush Installed.

1,185.00


2653B PrecisionCut Trim and Surrounds MowerContinued

15 April 2013 U.S.G-10- 45


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9015 (3) QA7 26 In. Fairway Tender Conditioners Shaft and Blades


9016 (3) QA7 FTC Gear DriveRequires order code 9015.

3,591.00

9017 (3) QA7 26 In. Rear Roller Power BrushRequires order code 9018. NOT Compatible with Grass Catchers.

495.00

9018 (3) QA7 26 In. Rear Roller Power Brush DriveRequires order code 9017. NOT Compatible with Grass Catchers.

1,083.00

9023 (3) 30 In. 3 In. Diameter Heavy Duty Grooved Roller Scrapers 411.00

9025 26 In. Smooth Roller Scrapers (Set of 3)Requires (3) TCA19587 from parts. Not compatibleif Rear Roller Power Brush installed.

132.00

9026 (3) 26 In. 3 In. Diameter Heavy Duty Grooved Roller ScraperNot compatible with Fairway Tender Conditioners (FTC).

378.00

9325 30 In. Smooth Roller Scrapers (Set of 3)Requires (3) TCA19587 from parts.

179.00

ATTACHMENTS FOR FIELD CONVERSIONCE Kit:

BTC10256 Battery Label KitThis kit must be ordered to meet battery labeling requirement in Brazil.

0.00

Cutting Units:BM24124 (1) QA7 Eight Blade 26 In. Cutting Unit with 6.3mm bedknife 2,449.23

BM24126 (1) QA7 Eight Blade 30 In. Cutting Unit 2,813.03

BM24123 (1) QA7 Five Blade 26 In. Cutting Unit with 6.3mm bedknife 2,291.94

BM24125 (1) QA7 Five Blade 30 In. Cutting Unit 2,615.09

Miscellaneous:BM22759 (1) 26 In Grass Catcher (3 needed for complete machine)

Requires BM18185 Orifice Kit.327.41

BM23005 (1) 26 In. 3 In. Diameter Heavy Duty Grooved Roller ScraperNot compatible with Fairway Tender Conditioners (FTC).

134.81

BM23004 (1) 30 In. 3 In. Diameter Heavy Duty Grooved Roller Scraper 146.59

BM22763 (1) Conversion Mounting Kit old Machine to New QA7 Cutting UnitsContains Parts to Convert (1) Cutting Unit.

70.61

BM22672 (1) QA7 26 In. Fairway Tender Conditioners Shaft and BladesAlso need order code 9016 (BM22673).

531.79

BM22669 (1) QA7 26 In. Rear Roller Power BrushAlso need order code 9018 (BM22674).NOT Compatible with Grass Catchers.

176.56



15 April 2013 U.S.G-10- 46


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22674 (1) QA7 26 In. Rear Roller Power Brush Drive 386.27

BM22673 (1) QA7 FTC Gear Drive 1,280.79

BM22764 1) Conversion Mounting Kit 2009 Machine to Old Cutting ESP Cutting unitsContains Parts to Convert (1) Cutting Unit.

70.61

BM17683 26 In. Smooth Roller Scrapers (Set of 3) 141.24


AM117680 Arm Rest Kit See Parts

ET17752 Bedknife Hi-Cut, 26-in 15.8 mm See Parts

BM18185 Grass Catcher Orifice1) Kit Required for installation of Grass Catchers on2653B, Not required for 7200.

35.31

TCU13823 Height of Cut Guage Bar See Parts


TCB11353 Lift Arms, Front (26 In. Right Hand and Left Hand) 405.53


TCB11065 Light Bracket Kit, FrontRequired to Mount BM19746 Front Light Kit.

86.67


BM22760 Mounting Hardware for 26 In Grass Catcher (set of 3) 250.39

TCB11107 Seat, Deluxe Suspension with Armrests 799.29

TCB11106 Seat, Standard 441.91

TCB11374 Yokes, Front (26 In. Right Hand and Left Hand) 589.57




62.06


62.06

BM22721 (1) QA7 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on 26" Cutting Unit.

139.10

Rollers:BM17670 (1) 26 In. 3 In. (7.6 cm) Diameter Heavy Duty

Grooved Disc Front Roller389.49



15 April 2013 U.S.G-10- 47


SUGGESTEDLIST PRICE

USD ($)


Smooth Solid Front Roller337.06

BM19818 (1) 26 In. 3 In. (7.6 cm) Diameter Spiral GroovedFront Roller With Spiral End Caps

457.96

BM18438 (1) 30 In. 3 In. (7.6 cm) Diameter Heavy DutyGrooved Disc Front Roller

531.79

BM18439 (1) 30 In. 3 In. (7.6 cm) Diameter Heavy DutySmooth Solid Front Roller

479.36


600.27



15 April 2013 U.S.G-10- 48

*Engine HP is Provided by theEngine Manufacturer to be Usedfor Comparison Purposes Only.Actual Operating HP will beLess. Refer to the enginemanufacturer#s web site foradditional information.

Gross Engine HP* 26.4 (19.69 kW)@ 2600 rpmNet Engine HP* 25.0 (18.64 kW)@2600 rpmThree Cylinder TurboDiesel EngineHydrostatic Drive(3) Independent Wheel MotorsGRIP All Wheel DriveWidth On Demand 68-in (173 cm); 72-In (183 cm)Reach Trimming System with

Maximum 14 In. (38cm) or 20 In.(50.8 cm) Shiftoutside front tire with 26-In(66 cm) or 30-In (76 cm)Power Steering with StraightTrack Steering CylinderDual Disc Brakes(2) 24x12-12 Turf Trac FrontDrive Tires(1) 24x12-12 Multi Trac RearDrive TireDeluxe Suspension Seat withRetractableSeatbeltWhite Box Controller withOn-Board Diagnostics

One-Touch Lift/Lower JoystickControlFoot Activated Tilt SteeringColumn

(3) Hydraulic Motors(3) QA7 26 In. Cutting Units2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterCommand Arm Operator Controls13 U.S. Gallon Fuel CapacityJohn Deere Golf Operator Videosand All Products Safety Video

DVD Set


SUGGESTEDLIST PRICE

USD ($)



1702TC 7200 PrecisionCut Trim and Surrounds Mower 37,232.00

REEL CUTTING UNITS26 Inch E.S.P. Cutting Units:Includes Front Lift Arms and Yokes.

1001 (3) QA7 Five Blade 26 In. Cutting Units -441.00

1006 (3) QA7 Eight Blade 26 In. Cutting Units with 6.3 mm bedknife In Base Price

30 Inch E.S.P. Cutting Units:Includes Front Lift Arms and Yokes.

1007 (3) QA7 Five Blade 30 In. Cutting Units 776.00

1008 (3) QA7 Eight Blade 30 In. Cutting Units 1,331.00

1010 Less Cutting Units, Front Lift Arms and Yokes -7,888.00

REEL FRONT ROLLERS26 Inch Front Rollers:

2001 (3) 3 In. (7.6 cm) Diameter Heavy Duty SmoothSolid Front Rollers

-147.00

2002 (3) 3 In. (7.6 cm) Diameter Heavy Duty GroovedDisc Front Rollers

In Base Price


7200 PrecisionCut Trim and Surrounds MowerEquipment for Base Machine

15 April 2013 U.S.G-10- 49


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...2003 (3) 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers

With Spiral End Caps192.00

30 Inch Front Rollers:2004 (3) 3 In. (7.6 cm) Diameter Heavy Duty Smooth Solid

Front Rollers252.00

2005 (3) 3 In. (7.6 cm) Diameter Heavy Duty Machined GroovedDisc Front Rollers

399.00


591.00

2010 Less Front Rollers -1,092.00


Needed for ALL 30" Cutting units and if NOTinstalling Rear Roller Power Brush or GTCKits on 26" Cutting Unit.

In Base Price

4002 (3) Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on 26" Cutting Unit.

216.00

4003 (3) FTC/GTC ONLY Counter Weight KitNeeded if ONLY installing FTC on 26" cutting unit.

Same Price

4010 Less Counter Weight kitOrdered if Both Rear Roller Power Brush and FTC Kit installed on 26" Cutting Unit.

-174.00



No Charge

European CE Kit:9100 European CE Conversion Kit for 7200 PrecisionCut Trim and Surrounds Mower

Must be Ordered to Receive a 7200 Surround Mower Which MeetsCE Mark Requirements. Kit Includes Locking Hood Latch,Pictorial Decals and Operator's Manuals in English,French German, Spanish and Italian.

38.00

9101 European CE Conversion Kit for 26 In. and 30 In. Cutting UnitsMust be Ordered to Receive Decals that Convert (3) 26 In. or30 In. Cutting Unit to Meet CE Mark Requirements.

No Charge


99.00

Miscellaneous:9000 Grass Catchers with Mounting Hardware for 26 Inch Cutting Unit

(Set of 3)Not Compatible if Rear Roller Power Brush Installed.

1,152.00


7200 PrecisionCut Trim and Surrounds MowerContinued

15 April 2013 U.S.G-10- 50


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9015 (3) QA7 26 In. Fairway Tender Conditioners Shaft and Blades



3,591.00

9017 (3) QA7 26 In. Rear Roller Power BrushRequires order code 9018. NOT Compatible with Grass Catchers.

495.00

9018 (3) QA7 26 In. Rear Roller Power Brush DriveRequires order code 9017. NOT Compatible with Grass Catchers.

1,083.00

9023 (3) 30 In. 3 In. Diameter Heavy Duty Grooved Roller Scrapers 411.00


132.00

9026 (3) 26 In. 3 In. Diameter Heavy Duty Grooved Roller ScraperNot compatible with Fairway Tender Conditioners (FTC).

378.00


179.00

9335 Joystick Kit 974.00

9345 Light Kit 216.00

ATTACHMENTS FOR FIELD CONVERSIONCE Kit:


0.00

Cutting Units:BM24124 (1) QA7 Eight Blade 26 In. Cutting Unit with 6.3mm bedknife 2,449.23

BM24126 (1) QA7 Eight Blade 30 In. Cutting Unit 2,813.03

BM24123 (1) QA7 Five Blade 26 In. Cutting Unit with 6.3mm bedknife 2,291.94

BM24125 (1) QA7 Five Blade 30 In. Cutting Unit 2,615.09

Miscellaneous:BM22759 (1) 26 In Grass Catcher (3 needed for complete machine)

Requires BM18185 Orifice Kit.327.41

BM23005 (1) 26 In. 3 In. Diameter Heavy Duty Grooved Roller ScraperNot compatible with Fairway Tender Conditioners (FTC).

134.81

BM23004 (1) 30 In. 3 In. Diameter Heavy Duty Grooved Roller Scraper 146.59

BM22672 (1) QA7 26 In. Fairway Tender Conditioners Shaft and BladesAlso need order code 9016 (BM22673).

531.79

BM22669 (1) QA7 26 In. Rear Roller Power BrushAlso need order code 9018 (BM22674).NOT Compatible with Grass Catchers.

176.56



15 April 2013 U.S.G-10- 51


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22674 (1) QA7 26 In. Rear Roller Power Brush Drive 386.27

BM22673 (1) QA7 FTC Gear Drive 1,280.79



ET17752 Bedknife Hi-Cut, 26-in 15.8 mm See Parts

TCB11728 Compliance KitThis kit must be ordered to meet the EU country of France shielding regulations.

105.93


TCB11296 Joystick Kit 1,042.19



TCB11462 Light Kit 231.11

BM22760 Mounting Hardware for 26 In Grass Catcher (set of 3) 250.39





62.06


62.06


139.10




337.06


457.96

BM18438 (1) 30 In. 3 In. (7.6 cm) Diameter Heavy DutyGrooved Disc Front Roller

531.79


479.36



15 April 2013 U.S.G-10- 52


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM19819 (1) 30 In. 3 In. (7.6 cm) Diameter Spiral Grooved

Front Roller With Spiral End Caps600.27



15 April 2013 U.S.G-10- 53

Gross Engine HP 37.1 (27.7 kW)Net Engine HP 35.7(26.55 kW)

@ 2600 RPMThree Cylinder TurboDiesel EngineServo Controlled HydrostaticDriveTwo Wheel DrivePower Steering with StraightTrack Steering CylinderDual Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresDeluxe Suspension Seat withArmrests and RetractableSeatbelt

White Box Controller withOn-Board DiagnosticsOne-Touch Lift/Lower Reel LeverElectric Over Hydraulic

Reel LiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Backlapping withAdjustabel Reel Speed ControlFive Standard Hydraulic ReelMotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5) QA5 7 Blade 22 In.(55.9 cm)Cutting Units

with Speed Link Height ofCut System

5 In. (12.7 cm) Diameter ReelsHeavy Section Reel Blades withAdjustable Bedknife with NocthAdjustments2 In. Diameter Machined Grooved

Solid Front Rollers2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterRemovable Rear Cutting UnitUpstops3 Front Work LightsCommand Arm Operator Controls18 U.S. Gallon Fuel Capacity


SUGGESTEDLIST PRICE

USD ($)



1453TC 7500 PrecisionCut Fairway Mower 55,049.00

REEL CUTTING UNITS1004 (5) Quick Adjust 5 (QA5) Seven Blade 22 In.

Heavy Section Standard Cutting Units WithAdjustable 4.8 mm Bedknife, Less Front And Rear Rollers

In Base Price

1005 (5) Quick Adjust 5 (QA5) Eleven Blade 22 In. (55.9 cm)Cutting Units With Adjustable 2.0mm Bedknife,5 In. (12.7 cm) Diameter Reels, Less Front Rollers

410.00

1010 Less Cutting Units -10,710.00

REEL FRONT ROLLERS2001 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Rollers

Not compatible if FTC installed.3 In. Diameter Front Rollers Raisethe Minimum Height of Cut.

530.00

2002 (5) 22 In. 2 In. (5cm) Diameter Machined GroovedSolid Front Rollers

In Base Price

2003 (5) 22 In. 2 In. (5cm) Diameter Spiral Grooved Front Rollers 330.00

2004 (5) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers with Spiral End CapsNot compatible if FTC installed.3 In. Diameter Front Rollers Raisethe Minimum Height of Cut.

860.00


7500 PrecisionCut Fairway MowerEquipment for Base Machine

15 April 2013 U.S.G-10- 54


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...2005 (5) 22 In. 2 In. (5cm) MT Spiral Roller

NOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

680.00


680.00

2007 (5) 22 In. 2 In. (5 cm) Diameter Hollow Smooth Roller -260.00

2010 Less Front Rollers, Roller Adjusters and Skid Shoes -1,040.00

REEL REAR ROLLERS2501 (5) 22 In. 2 In (5cm) Diameter Hollow Smooth Roller In Base Price


940.00


940.00


REEL CUTTING UNIT COUNTER WEIGHTS4001 (5) QA5 Cutting Unit ONLY Counter Weight Kit


4002 (5) QA5 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on Cutting Unit.

360.00


Same Price

4010 Less Counter Weight kit -290.00



No Charge

Cutting Units:9010 (5) Vertical Cutting Units with Front Rollers Less Motors 11,005.00

European CE Kit9100 European CE Conversion Kit, 7500 PrecisionCut Fairway Mower

Must be Ordered to Receive a PrecisionCut Fairway Mower Which Meets CERequirements. Kit Includes Electric Hood Switch, Pictorial Decals and Operator'sManuals in English, French, German, Spanish and Italian.

35.00

9102 European CE Reel Decal Kit for QA5 Cutting UnitsMust be Ordered to Receive Decals that Converts (5) QA5 Cutting Units to Meet CE MarkRequirements.

No Charge


7500 PrecisionCut Fairway MowerContinued

15 April 2013 U.S.G-10- 55


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9350 Compliance Kit


Miscellaneous:9733 (5) Front Grass Catchers with large paddle clip Mounting Hardware for QA5 Cutting

Units, Rear Bail and Catchers w/handles, Wing Latch Kit and grass catcher side plateinserts kit for front center.Note: Cutting unit shield extensions should only be used in dry conditions.

1,524.00

9015 (5) 22 In. Fairway Tender Conditioners (FTC) Shaft and BladesRequires order code 9016.3" roller when used on the QA5 is not compatible with the FTC.

2,325.00

9016 (5) QA5 GTC/FTC Gear DriveRequires order code 9015 (BM22670).3" roller when used on the QA5 is not compatible with the FTC.

5,985.00

9017 (5) 22 In. Rear Roller Power BrushesRequires order code 9018 (BM22527).

660.00

9018 (5) Rear Roller Power Brush DriveRequires order code 9017 (BM22668).

1,805.00

9019 (5) 22 In. Front Rotary Turf BrushCan not be used with FTC/GTC 9015.Requires order code 9016.3" roller when used on the QA5 is not compatible with the FTC.

980.00

9020 Hydraulic Down Pressure Kit 882.00

9021 4WD Conversion KitConverts 2WD Traction Unit into 4WD Traction Unit.

4,327.00

9025 (5) 22 In. Smooth Roller Scrapers 75.00

9070 (5) QA5 Grass Catcher Lip ExtensionThis kit extends the front lip of the grass catcher closer to the reel.

45.00

9400 Canopy 425.00










15 April 2013 U.S.G-10- 56


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Cutting Units:

BM22460 (1) QA5 22 In. Vertical Cutting Unit With FrontRoller Less Motor

2,355.07


2,379.69


2,291.94

BM22458 (1) QA5 Seven Blade 22 In. Heavy Section BladeCutting Unit With Adjustable Bedknife, Less Yokes,Front Roller & Motor

See Parts









141.24




9.63


386.27



146.59

BTC10259 4WD Conversion Kit 4,629.89

TCB11460 Electronic Cruise Control Kit 256.80

BTC10217 Front High Capacity Catcher with large paddle clip(3 needed for front location on Fairway Mowers)

180.83

BM22757 Grass Catcher Mounting Kit (set of 5) 1 needed per machine 108.07



15 April 2013 U.S.G-10- 57


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10216 Grass Catcher with large paddle clip (22 Low Profile) 175.49


TCB11128 Hydraulic Down Pressure Kit 943.74

TCU23674 John Deere Golf Operator Videos and All Products Safety Video DVD Set See Parts


47.09

BM23576 QA5 Slope Leveling Kit1 per cutting unit.

49.21

BTC10501 Rear Grass Catcher Bail KitRequires 2 for complete machine & rear grass catcher BTC10408.

182.97

BTC10194 Wing Latch KitNeeded to Secure Wing Grass Catchers when in Transport Position.

282.49



62.06


139.10


62.06

Rollers:BM24202 (1) 22 In. 2 In. (5 cm) Diameter Hollow Smooth Roller 166.91


237.54


222.56

BM19821 (1) 22 In. 2 In. (5 cm) Diameter Spiral Grooved Front Roller 293.19

BTC10267 (1) 22 In. 2 In. (5cm) MT Grooved RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

368.09


335.99



15 April 2013 U.S.G-10- 58


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM19817 (1) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved

Front Roller With Spiral End CapsNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

406.60

BM23566 (1) 2X22" MT SPIRAL RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

368.09



15 April 2013 U.S.G-10- 59


@ 2600 RPMThree Cylinder Turbo DieselEngineServo Controlled HydrostaticDriveTwo Wheel DrivePower Steering with StraightTrack Steering CylinderDual Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresDeluxe Suspension Seat withArmrests and RetractableSeatbelt


Reel LiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Electric Backlappingwith Adjustable Reel Speed

ControlFive Electric Reel MotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5)QA5 7 Blade 22 In.(55.9 cm)Cutting Units


5 In. (12.7 cm) Diameter ReelsHeavy Section Reel Blades withAdjustable Bedknife with

Notch Adjustments2 In. Diameter Machined Grooved



SUGGESTEDLIST PRICE

USD ($)



1742TC 7500 E-Cut Hybrid Fairway Mower Diesel 57,848.00



In Base Price


410.00




530.00


In Base Price



860.00


7500 E-Cut Hybrid Fairway Mower DieselEquipment for Base Machine

15 April 2013 U.S.G-10- 60


SUGGESTEDLIST PRICE

USD ($)



680.00


680.00





940.00


940.00





360.00


Same Price




No Charge



35.00


No Charge


99.00


7500 E-Cut Hybrid Fairway Mower DieselContinued

15 April 2013 U.S.G-10- 61


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...Miscellaneous:

9733 (5) Front Grass Catchers with large paddle clip Mounting Hardware for QA5 CuttingUnits, Rear Bail and Catchers w/handles, Wing Latch Kit and grass catcher side plateinserts kit for front center.Note: Cutting unit shield extensions should only be used in dry conditions.

1,524.00


2,325.00


5,985.00


660.00


1,805.00


980.00



4,327.00



45.00

9400 Canopy 425.00








Cutting Units:BM24130 (1) QA5 Eleven Blade 22 In. Cutting Unit

w/Adjustable 2.0 mm Bedknife, Less Front and Rear Roller & Motor2,379.69



15 April 2013 U.S.G-10- 62


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM24129 (1) QA5 Seven Blade 22 In. Heavy Section Blade

Cutting Unit With Adjustable 4.8 mm Bedknife, Less Yokes,Front and Rear Roller & Motor

2,291.94


See Parts









141.24




9.63


386.27



146.59




180.83


BTC10216 Grass Catcher with large paddle clip (22 Low Profile) 175.49





15 April 2013 U.S.G-10- 63


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCU23674 John Deere Golf Operator Videos and All Products Safety Video DVD Set See Parts


47.09


49.21


182.97


282.49



62.06


139.10


62.06



237.54


222.56



368.09


335.99


406.60


368.09



15 April 2013 U.S.G-10- 64



15 April 2013 U.S.G-10- 65


@ 2600 rpmYanmar Three Cylinder TurboDiesel EngineServo Controlled HydrostaticDriveTwo Wheel DrivePower Steering with StraightTrack Steering CylinderDual Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresDeluxe Suspension Seat withArmrests and RetractableSeatbelt

White Box Controller withOn-Board DiagnosticsOne-Touch Lift/Lower Reel Lever

Electric Over HydraulicReel LiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Backlapping withAdjustable Reel Speed ControlFive Hydraulic Quick-Tatch ReelMotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5) QA7 22 In. (55.9 cm) CuttingUnits (Eight Blade)7 In. (17.8 cm) DiameterReels with Reel to Bedknifewith Notch Adjustments2 In. Diameter Machined GroovedSolid Front Rollers

2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterRemovable Rear Cutting UnitUpstops3 Front Work LightsCommand Arm Operator Controls18 U.S. Gallon Fuel Capacity


SUGGESTEDLIST PRICE

USD ($)




REEL CUTTING UNITS1004 (5) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units with 6.3 mm bedknife Less

Front Rollers, Motors and counter weightIn Base Price

1005 (5) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting Units with 6.3 mm bedknife,Less Front Rollers, Motors and counter weights

260.00


REEL FRONT ROLLERS2001 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Rollers In Base Price

2002 (5) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved FrontRollers with Spiral End Caps

330.00



Needed if NOT installing Rear Roller Power Brushor GTC/FTC Kits.

In Base Price

4002 (5) QA7 Reel Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on Cutting Unit.

360.00




15 April 2013 U.S.G-10- 66


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...Needed if ONLY installing FTC/GTC on cutting unit.

4010 Less Counter Weight kitOrdered if Both Rear Roller Power Brush and FTC/GTC Kit installed.

-290.00



No Charge

Cutting Units:9010 (5) QA7 Vertical Cutting Units with Front Rollers

Less Motors9,020.00


Must be Ordered to Receive a PrecisionCut Fairway Mower WhichMeets CE Requirements. Kit Includes Electric Hood Switch,Pictorial Decals and Operator's Manuals in English, French,German, Spanish and Italian.

35.00

9102 European CE Reel Decal Kit for E.S.P. Cutting UnitsMust be Ordered to Receive Decals that Converts (5) E.S.P.Cutting Units to Meet CE Mark Requirements.

No Charge


99.00

Miscellaneous:9000 (5) Grass Catchers with large paddle clip Mounting Hardware for QA7 Cutting Units and

Wing Latch1,232.00

9015 (5) QA7 22" Fairway Tender Conditioners Shaft and BladesRequires order code 9016.

2,485.00


5,985.00

9017 (5) QA7 22" Rear Roller Power BrushesRequires order code 9018.

660.00

9018 (5) QA7 Rear Roller Power Brush DriveRequires order code 9017.

1,805.00


4,327.00

9022 (5) 22 In. 3 In. Diameter Heavy DutyGrooved Disc Roller Scrapers

685.00

9025 (5) 22 In. Smooth Roller ScrapersRequires (5) TCA19587 from parts.

198.00

9400 Canopy 425.00

ATTACHMENTS FOR FIELD CONVERSION



15 April 2013 U.S.G-10- 67


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...CE Kit:


0.00

Cutting Units:BM22461 (1) QA7 Vertical Cutting Units with Front Rollers

Less Motors1,930.29

BM22463 (1) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting UnitsLess Front Rollers and Motors

2,785.21

BM22464 (1) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting UnitsLess Front Rollers and Motors

2,840.86

BM24122 (1) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting Units with 6.3 mm bedknife,Less Front Rollers, Motors and counter weights

2,840.86

BM24121 (5) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units with 6.3 mm bedknifeLess Front Rollers, Motors and counter weight

2,785.21





Miscellaneous:BM22763 (1) Conversion Mounting Kit old Machine to New QA7 Cutting Units

Contains Parts to Convert (1) Cutting Unit.70.61

BM22693 (1) QA7 22" Fairway Tender Conditioners Shaft and BladesAlso need order code 9016 (BM22673).

531.79

BM22712 (1) QA7 22" Rear Roller Power BrushAlso need order code 9018 (BM22674).

141.24

BM22674 (1) QA7 26 In. Rear Roller Power Brush Drive 386.27

BM22673 (1) QA7 FTC Gear DriveAlso need order code 9015 (BM22693).

1,280.79

BM17684 (5) 22 In. Smooth Roller ScrapersRequires (5) TCA19587 from parts.

211.86

BM22764 1) Conversion Mounting Kit 2009 Machine to Old Cutting ESP Cutting unitsContains Parts to Convert (1) Cutting Unit.

70.61


146.59


AMT663 Bar Gauge Kit See Parts



15 April 2013 U.S.G-10- 68


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...MT1928 Bedknife, Low-Cut Fairway See Parts

TCB11126 Canopy 454.76



180.83

TCB11414 Front Wing Latch Kit (Set of 2) 1 per machineNeeded to Secure Wing Grass Catchers when in Transport Position.

220.41

BM22756 Grass Catcher Mounting Kit ( set of 5) 1 needed per machine 204.37


175.49





62.06


62.06


139.10




406.60



15 April 2013 U.S.G-10- 69


@ 2600 rpmThree Cylinder TurboDiesel EngineHydrostatic DriveThree Wheel DrivePower Steering with StraightTrack Steering CylinderDual Disc Brakes80 In. (2.03 m) Cutting Width24x13 -12 Smooth Drive Tires24x13 -12 Smooth Steer TiresDeluxe Suspension Seat withArmrest and RetractableSeatbelt


Electric Over Hydraulic ReelLiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Backlapping withAdjustable Reel Speed ControlFive Electric Reel MotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5)QA5 11 Blade 22 In. (55.9 cm)Cutting Units with Speed Link

Height of Cut System2 In. Diameter Machined GroovedSolid Front Rollers2-Post Roll Over ProtectionStructure

6 LED Warning Light InstrumentCluster with Hour Meter3 Front Work LightsCommand Arm Operator Controls13 U.S. Gallon Fuel CapacityJohn Deere Golf Operator Videosand All Products Safety Video

DVD Set


SUGGESTEDLIST PRICE

USD ($)



1723TC 8000 E-Cut Hybrid Fairway Mower Diesel 53,748.00

REEL CUTTING UNITS1004 (5) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with Yokes,

less Front Rollers, Motors and Counter WeightIn Base Price

1005 (5) Quick Adjust 5 (QA5) Seven Blade 18 In. Heavy Section Standard CuttingUnits with 4.8 mm bedknife, Yokes, less Front Rollers, Motors and Counter Weights

-1,235.00


REEL FRONT ROLLERS2001 (5) 18 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front Rollers


780.00

2002 (5) 18 In. 2 In. (5 cm) Diameter Machined Smooth Solid Front Roller Same Price

2003 (5) 18 In. 2 In. (5cm) Diameter Grooved Front Rollers In Base Price

2004 (5) 18 In. 2 In. (5cm) Spiral Grooved Front Rollers with Spiral end Caps 780.00

2005 (5) 18 In. 2 In. (5 cm) MT Spiral Roller 430.00

2006 (5) 18 In. 2 In. (5 cm) MT Grooved Roller 780.00



8000 E-Cut Hybrid Fairway Mower DieselEquipment for Base Machine

15 April 2013 U.S.G-10- 70


SUGGESTEDLIST PRICE

USD ($)



590.00


940.00





360.00


Same Price


-290.00

ATTACHMENTS - ORDER AS DESIREDCE Kit:European CE Kit

9100 European CE Conversion Kit, 8000 E-Cut Hybrid Fairway MowerMust be Ordered to Receive a PrecisionCut Fairway Mower Which Meets CERequirements. Kit Includes Electric Hood Switch, Pictorial Decals and Operator'sManuals in English, French, German, Spanish and Italian.

35.00


No Charge


99.00

Miscellaneous:9733 (5) Front Grass Catchers with large paddle clip, shield extensions with Mounting

Hardware for 18" QA5 Cutting Units, Rear Bail and Catchers w/handles and grasscatcher side plate inserts.Note: Cutting unit shield extensions should only be used in dry conditions.

1,506.00

9000 (5) Grass Catchers with large paddle clip, shield extensions with Mounting Hardware for18" QA5 Cutting Units and grass catcher side plate inserts.

1,206.00

9015 (5) QA5 18"" Fairway Tender Conditioners Shaft (FTC) and BladesAlso need order code 9016 (BM22469).Not compatible with 3 In roller option 2001 (BM23016).

2,325.00

9016 (5) QA5 FTC Gear DriveAlso need order code 9015 (BM22670).

5,985.00



15 April 2013 U.S.G-10- 71


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9017 (5) QA5 18 In. Rear Roller Power Brushes

Also need order code 9018 (BM22527).660.00

9018 (5) QA5 Rear Roller Power Brush DriveAlso need order code 9017 (BM22667).

1,805.00


9029 (5) 18 In. 3 In. Diameter Heavy Duty Grooved Roller ScrapersNot compatible with Fairway Tender Conditioner option 9015 (BM22670).

630.00


45.00


MT7350 Bedknife, 2.0 mm Ultra Low-Cut See Parts

MT4846 Bedknife, 2.5 mm Tournament See Parts

ET17751 Bedknife, Hi-cut Fairway 12 mm See Parts

TCU31422 Bedknife, Hi-cut Fairway 7.6 mm See Parts

TCU252299 Bedknife, Lo-cut Fairway 4.8 mm See Parts

MT3883 Bedknife, Ultra Lo-cut Fairway 6.3 mm See Parts

Cutting Units:BM22479 (1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with Yokes, less Front

Rollers, Motors and Counter WeightIncludes Rear Roller

2,556.23

BM24128 (1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with Yokes, less Front andRear Rollers, Motors and Counter Weight

2,556.23

BM24127 (1) Quick Adjust 5 (QA5) Seven Blade 18 In. Heavy Section Standard CuttingUnits with 4.8mm bedknife, Less Front and Rear Rollers, Motors and Counter Weights

2,291.94



Miscellaneous:TCA19585 (1) 18 In 2 In Grooved Roller Scraper

Need to order 5 for completed machine.See Parts

BM23014 (1) 18 In. 3 In. Diameter Heavy Duty Grooved Roller ScraperNot compatible with Fairway Tender Conditioner option 9015 (BM22670).

134.81

BTC10215 (1) 18 In. Front Grass Catcher with large paddle clip 191.53

BTC10405 (1) 18 In. Rear Grass Catcher Bail SystemCompatible with with rear grass catcher BTC10406.

240.90



15 April 2013 U.S.G-10- 72


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10406 (1) 18 In. Rear Grass Catcher with Handles

Compatible with with rear grass catcher bail system BTC10405.153.01

BTC10214 (1) 18 In. Rear Grass Catcher with large paddle clipNot compatible with with rear bail system BTC10405.

186.19

BM23015 (1) 18 In. Smooth Rear Roller Scraper 16.06


BM22670 (1) QA5 18 In. Fairway Tender Conditioners Shaft (FTC) and BladesRequires GTC/FTC Gear Drive (BM22469).Not compatible with 3 In roller option 2001 (BM23016).

497.56

BM22667 (1) QA5 18 In. Rear Roller Power BrushesRequires Rear Roller Power Brush Drive (BM22527).

141.24


9.63


386.27

TCB11728 Compliance KitThis kit must be ordered to meet the EU country of France shielding regulations.

105.93





47.09


49.21

TCU25388 UltraTrac Fairway Mower Tire See Parts



62.06


139.10


62.06




15 April 2013 U.S.G-10- 73


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM20561 (1) 18 In. 2 In. (5 cm) Diameter Machined Smooth

Solid Roller201.16

BM22868 (1) 18 In. 2 In. (5cm) Diameter Grooved Front Rollers 201.16

BM22879 (1) 18 In. 2 In. (5cm) Spiral Grooved Front Roller with Spiral end Cap 368.09

TCA19509 (1) 18 In. 3 In (7.6 cm) Diameter Smooth Front or Rear Roller (Hollow)Not compatible with Fairway Tender Conditioners (FTC).

See Parts

BM23016 (1) 18 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front RollersNot compatible if FTC installed.3 In. Diameter Front Rollers Raisethe Minimum Height of Cut.

368.09

BTC10281 (1) 18 in. 2 in. (5cm) MT Grooved RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

368.09

BM23567 (1) 2X18" MT Spiral RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

293.19



15 April 2013 U.S.G-10- 74

Gross Engine HP 43.1 (32.2 kW)Net Engine HP 41.7 (31.1 kW)

@ 2600 rpmThree Cylinder TurboDiesel EngineServo Controlled HydrostaticDriveTwo Wheel DrivePower Steering with StraightTrack Steering CylinderDual Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresDeluxe Suspension Seat withArmrests and RetractableSeatbelt


Reel LiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Backlapping withAdjustabel Reel Speed ControlFive Standard Hydraulic ReelMotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5) QA5 7 Blade 22 In.(55.9 cm)Cutting Units


5 In. (12.7 cm) Diameter ReelsHeavy Section Reel Blades withAdjustable Bedknife with Nocth

Adjustments2 In. Diameter Machined Grooved



SUGGESTEDLIST PRICE

USD ($)






In Base Price


410.00




530.00


In Base Price



860.00



15 April 2013 U.S.G-10- 75


SUGGESTEDLIST PRICE

USD ($)



680.00

2006 (5) 22 In. 2 In. (5cm) MT Grooved Roller 680.00





940.00


940.00





360.00


Same Price




No Charge

Cutting Units:9010 (5) Vertical Cutting Units with Front Rollers Less Motors 11,005.00



35.00

9102 European CE Reel Decal Kit for Seven Blade Standard Cutting UnitsMust be Ordered to Receive Decals that Converts (5) Seven Blade Standard Cutting Unitsto Meet CE Mark Requirements.

No Charge


99.00

Miscellaneous:



15 April 2013 U.S.G-10- 76


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9733 (5) Front Grass Catchers with large paddle clip Mounting Hardware for QA5 Cutting


1,524.00


2,325.00


5,985.00


660.00


1,805.00


980.00



4,327.00



45.00

9400 Canopy 425.00











2,379.69



15 April 2013 U.S.G-10- 77


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM24129 (1) QA5 Seven Blade 22 In. Heavy Section Blade

Cutting Unit With Adjustable 4.8 mm Bedknife, Less Yokes,Front and Rear Roller & Motor

2,291.94


See Parts









141.24




9.63


386.27



146.59




180.83







15 April 2013 U.S.G-10- 78


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCU23674 John Deere Golf Operator Videos and All Products Safety Video DVD Set See Parts


47.09


49.21


182.97


282.49



62.06


139.10


62.06



237.54


222.56



368.09


335.99


406.60


368.09



15 April 2013 U.S.G-10- 79



15 April 2013 U.S.G-10- 80

Gross Engine HP* 43.1 (32.2 kW)Net Engine HP 41.7 (31.1 kW)



Reel LiftPatented Rear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Backlapping withAdjustabel Reel Speed ControlFive Electric Reel MotorsQuick-Tatch Cutting UnitsAdjustable Hydraulic

Down Pressure(5) QA5 7 Blade 22 In.(55.9 cm)Cutting Units


5 In. (12.7 cm) Diameter ReelsHeavy Section Reel Blades withAdjustable Bedknife with Notch

Adjustments2 In. Diameter Machined GroovedSolid Front Rollers and hollow

smooth rear rollers2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterRemovable Rear Cutting UnitUpstops3 Front Work LightsCommand Arm Operator Controls18 U.S. Gallon Fuel Capacity


SUGGESTEDLIST PRICE

USD ($)



1752TC 8500 E-Cut Hybrid Fairway Mower -Diesel 61,058.00



In Base Price


410.00




530.00


In Base Price



860.00


8500 E-Cut Hybrid Fairway Mower -DieselEquipment for Base Machine

15 April 2013 U.S.G-10- 81


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...2005 (5) 22 In. 2 In. (5cm) MT Spiral Roller 680.00

2006 (5) 22 In. 2 In. (5cm) MT Grooved Roller 680.00





940.00


940.00





360.00


Same Price




No Charge



35.00

9102 European CE Reel Decal Kit for Seven Blade Standard Cutting UnitsMust be Ordered to Receive Decals that Converts (5) Seven Blade Standard Cutting Unitsto Meet CE Mark Requirements.

No Charge


99.00

Miscellaneous:9733 (5) Front Grass Catchers with large paddle clip Mounting Hardware for QA5 Cutting


1,524.00


8500 E-Cut Hybrid Fairway Mower -DieselContinued

15 April 2013 U.S.G-10- 82


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9015 (5) 22 In. Fairway Tender Conditioners (FTC) Shaft and Blades

Requires order code 9016.3" roller when used on the QA5 is not compatible with the FTC.

2,325.00


5,985.00


660.00


1,805.00


980.00



4,327.00



45.00

9400 Canopy 425.00








Cutting Units:BM24130 (1) QA5 Eleven Blade 22 In. Cutting Unit

w/Adjustable 2.0 mm Bedknife, Less Front and Rear Roller & Motor2,379.69


2,291.94


See Parts



15 April 2013 U.S.G-10- 83


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22479 (1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with Yokes, less Front

Rollers, Motors and Counter WeightIncludes Rear Roller

2,556.23









141.24




9.63


386.27



146.59




180.83








15 April 2013 U.S.G-10- 84


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM24199 QA5 Grass Catcher Side Plate Insert

2 Needed for complete machine 2500's.1 Needed for front center location for 7500/8500 Fairway Mowers.1 Needed for 180 & 220 E-Cut Hybrid Walk Greens Mowers.3 Needed for front 8000 E-Cut Hybrid Fairway Mower.

47.09


49.21


182.97


282.49



62.06


139.10


62.06



237.54


222.56



368.09


335.99


406.60


368.09



15 April 2013 U.S.G-10- 85

Gross Engine HP 43.1 (32.2 kW)Net Engine HP 41.7 (31.1 kW



Electric Over HydraulicReel LiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Backlapping withAdjustable Reel Speed ControlFive Hydraulic Quick-Tatch ReelMotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5) QA7 22 In. (55.9 cm) CuttingUnits (Eight Blade)7 In. (17.8 cm) DiameterReels with Reel to Bedknifewith Notch Adjustments2 In. Diameter Machined GroovedSolid Front Rollers

2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterRemovable Rear Cutting UnitUpstops3 Front Work LightsCommand Arm Operator Controls18 U.S. Gallon Fuel Capacity


SUGGESTEDLIST PRICE

USD ($)




REEL CUTTING UNITS1004 (5) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units with 6.3 mm bedknife Less

Front Rollers, Motors and counter weightIn Base Price

1005 (5) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting Units with 6.3 mm bedknife,Less Front Rollers, Motors and counter weights

260.00


REEL FRONT ROLLERS2001 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc In Base Price

2002 (5) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved FrontRollers with Spiral End Caps

330.00


TRACTION DRIVE UNIT3000 2WD Traction Unit In Base Price

3001 Factory Installed 4WD Traction Unit 4,411.00


Needed if NOT installing Rear Roller Power BrushIn Base Price



15 April 2013 U.S.G-10- 86


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...or GTC/FTC Kits.

4002 (5) QA7 Reel Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on Cutting Unit.

360.00


Same Price


-290.00



No Charge

Cutting Units:9010 (5) QA7 Vertical Cutting Units with Front Rollers

Less Motors9,020.00


Must be Ordered to Receive a PrecisionCut Fairway Mower WhichMeets CE Requirements. Kit Includes Electric Hood Switch,Pictorial Decals and Operator's Manuals in English, French,German, Spanish and Italian.

35.00

9102 European CE Reel Decal Kit for E.S.P. Cutting UnitsMust be Ordered to Receive Decals that Converts (5) E.S.P.Cutting Units to Meet CE Mark Requirements.

No Charge


99.00

Miscellaneous:9000 (5) Grass Catchers with large paddle clip Mounting Hardware for QA7 Cutting Units and

Wing Latch1,232.00

9015 (5) QA7 22" Fairway Tender Conditioners Shaft and BladesRequires order code 9016.

2,485.00


5,985.00

9017 (5) QA7 22" Rear Roller Power BrushesRequires order code 9018.

660.00

9018 (5) QA7 Rear Roller Power Brush DriveRequires order code 9017.

1,805.00


4,327.00

9022 (5) 22 In. 3 In. Diameter Heavy DutyGrooved Disc Roller Scrapers

685.00



15 April 2013 U.S.G-10- 87


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9025 (5) 22 In. Smooth Roller Scrapers

Requires (5) TCA19587 from parts.198.00

9400 Canopy 425.00


ET17751 Bedknife, Hi-cut Fairway 12 mm See Parts

MT3883 Bedknife, Ultra Lo-cut Fairway 6.3 mm See Parts

CE Kit:BTC10256 Battery Label Kit

This kit must be ordered to meet battery labeling requirement in Brazil.0.00

Cutting Units:BM22461 (1) QA7 Vertical Cutting Units with Front Rollers

Less Motors1,930.29

BM22463 (1) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting UnitsLess Front Rollers and Motors

2,785.21

BM22464 (1) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting UnitsLess Front Rollers and Motors

2,840.86

BM24122 (1) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting Units with 6.3 mm bedknife,Less Front Rollers, Motors and counter weights

2,840.86

BM24121 (5) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units with 6.3 mm bedknifeLess Front Rollers, Motors and counter weight

2,785.21





Miscellaneous:BM22763 (1) Conversion Mounting Kit old Machine to New QA7 Cutting Units


BM22693 (1) QA7 22" Fairway Tender Conditioners Shaft and BladesAlso need order code 9016 (BM22673).

531.79

BM22712 (1) QA7 22" Rear Roller Power BrushAlso need order code 9018 (BM22674).

141.24

BM22674 (1) QA7 26 In. Rear Roller Power Brush Drive 386.27

BM22673 (1) QA7 FTC Gear DriveAlso need order code 9015 (BM22693).

1,280.79

BM17684 (5) 22 In. Smooth Roller ScrapersRequires (5) TCA19587 from parts.

211.86



15 April 2013 U.S.G-10- 88


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22764 1) Conversion Mounting Kit 2009 Machine to Old Cutting ESP Cutting units



146.59


AMT663 Bar Gauge Kit See Parts

MT1928 Bedknife, Low-Cut Fairway See Parts

TCB11126 Canopy 454.76



180.83

TCB11414 Front Wing Latch Kit (Set of 2) 1 per machineNeeded to Secure Wing Grass Catchers when in Transport Position.

220.41

BM22756 Grass Catcher Mounting Kit ( set of 5) 1 needed per machine 204.37


175.49





62.06


62.06


139.10




406.60



15 April 2013 U.S.G-10- 89

john deere golf products reel mowers … grass catcher side plate insert, rear catcher and bail...

Documents