WE ARE URACA.

JetPower40HWHot water high pressure pump unitJetPower40HW cleans quickly,

efficiently and sustainably. Scaling,

coating and contaminants on dama-

geable surfaces can be removed by

the use of hot water with 95 °C and

with a cleaning pressure up to

1,000 bar / 14,500 psi in a gentle and

fast way.

Technical features _ Flexible and rapidly mobilized to the operation site e.g. with a passenger car

(trailer load of 2.1 t). _ Efficient diesel engine „Made in Germany“, with emission level compliant to

3B/TIER 4 final regulations, achieve fuel savings and emission reduction. _ JetPower40HW are reliable, long-life and user-friendly due to easily adjustable

pressure and flow regulation. _ All in all, the innovative arrangements of the components, especially of the heaters,

are extending the service intervals by concurrent increase of the energy-efficiency.

Anniversary Promotion“LIMITED EDITION”

12.5 % special discountOffer valid while supply lasts.

WE ARE URACA. SINCE 1893.

URACA GmbH & Co. KG • Sirchinger Straße 15 • 72574 Bad Urach • GermanyPhone +49 7125 133-0 • Fax +49 (0) 7125 133-202 • info@uraca.de • www.uraca.com Je

tPow

er40

HW

_F.e

n 0

8.18

, sub

ject

to c

hang

e w

itho

ut n

otic

e

Hot water edition –our solution for your tasksApplication areas

URACA JetPower Control

Selection of the operating pressure and water temperature is easy and

intuitive assured through central URACA JetPower Control Unit. See

and control all operation parameters at a glance, this also provides

excellent accessibility for routine maintenance.

_ In general to remove scaling, coating and contaminants on sensitive

and insensitive surfaces, by loosening in a fast and mild way, e.g.

bitumen, fat, resin, oil, wax, etc. _ For industrial cleaning to remove adhesives and coatings, especially in

the chemical and process industry as well as oil and gas industry, e.g.

in refineries, on oil platforms, fat separation and heat exchanger

industries. _ To clean and renovate facades and valuable monuments, construction

vehicles, scaffolding, construction formwork and equipment. _ For cities to clean public places, the traffic infrastructure, park decking

and flooring, outbuilding cleaning and specialized cleaning (e.g. to

remove graffiti, chewing gum, adhesive and cement remains).

Anniversary Promotion„LIMITED EDITION“

12.5 % special discountOffer valid while supply lasts.

Accessories (included in the scope of delivery)URACA spray lance for hot water with contact protectionFlexible hose line DN 8 / PN 1,000 x 20,000 mmPoint- / flat jet nozzle type PHot water rotation nozzleExtension cable 20 m for remote control R72Documentation

Technical data JetPower40HWPump type P3-10Drive power 5 - 56 kWPressure stages 800 / 1,000 barFlow rate 12.7 - 26 l/min at 800 bar

9.8 - 20 l/min at 1,000 barCleaning temperature

max. 95°C

Drive power motor 52 kW HATZDiesel / fuel tank 100 l / 150 lDimensions ca. 3,813 x 1,910 x 2,048 mmDead weight ca. 1,750 kg1 bar = 14.5038 psi, 1 l/min = 0.26417 USGPM, 1 kW = 1.3410 HP, 1 mm = 0.03937 inch, 1 kg = 2.205 lbs