JDSU Packet Transport Network (PTN) Test Solutions and Examples

Communications Test and Measurement Solutions

2

JDSU PTN Test Solutions and Examples ................................................................................ 3

ONT Optical Network Tester ...................................................................................................... 4

T-BERD 8000™ Integrated Field Application Tester .......................................................... 6

T-BERD 6000A and 8000 Multi-Service Application Module (MSAM) ........................ 7

T-BERD 5800 Handheld Network Tester ................................................................................. 8

HST-3000 Ethernet Handheld Tester ....................................................................................... 9

SmartClass Ethernet .................................................................................................................... 10

Fiber Inspection, Cleaning and Test Solutions ................................................................. 10

Power Measurement and Fiber Identification Solutions ............................................. 11

OTDR and Optical Power Measurement Solutions ......................................................... 11

Test Example 1: End-to-End MPLS-TP Flow and OAM Verification .................................. 12

Test Example 2: MPLS-TP Flow Real-Time Network Monitoring ....................................... 13

Test Example 3: Ensure Accurate Time Synchronization Verification for 1588v2 Networks ........................................................................................................................................... 13

Test Example 4: PTN One-Way Latency Test ........................................................................... 14

Test Example 5: Synchronous Ethernet Clock Synchronization Test ............................... 15

Table of Contents

3

JDSU PTN Test Solutions and Examples

With full-service networks being IP-based, three major domestic carriers have put much energy into developing their own mobile backhaul technology in the past three years. As PTN technology possesses many inherent advantages, China Mobile has been widely using it as its first choice for mobile backhaul; China Telecom is also looking at the mobile backhaul technology for its FDD network, and testing focused on PTN has proven remarkable. China Unicom is following China Mobile and China Telecom, and has organized a large number of PTN tests. With the PTN network being gradually applied to access transmission networks, test programs are currently quite limited and there are no effective solutions.

JDSU offers end-to-end PTN test solutions that cover the entire PTN application life cycle and various aspects from deployment to post-launch maintenance. It enhances the operator’s confidence in network deployment, new service provi-sioning, network post-launch maintenance, and fault location. At the same time, it requires minimal hardware resources, is easy to use, and can save the user significant costs while handling large-scale applications.

PTN network topology and JDSU test tools

(5). T-BERD 5800

(7). HST-3000

4

The industry’s most advanced and complete solutions for 1.5 Mbps to 112 G which can cover error, warning, switching, delay, overhead, pointer, clock synchroniza-tion, optical power, frequency offset, wander, and jitter, and can be applied to a variety of applications such as development, production, installation, commis-sioning, and maintenance.

PTN Features • The precision 1310/1550 nm jitter and wander function is the industry’s only

solution that meets Annexes VII and VIII of ITU-T O.172 and that can be calibrated, received, or sent with Golden “TX.” Detailed charting ensures the precision applied by each speed. Provides ±15 mUI jitter measurement accuracy.

• Supportsjitterandwandertestingfor1/10.3GESync-E,OTU1e,andOTU2e,andprovides G.8262 testing templates.

• IncludesCC64kHz,1.5/2/6.3/10MHz,E1/DS1,and1ppssignalwandercharac-teristics(TDEV,MTIE),wandertolerance,awandertransmissiontest function,the industry’s only wander generation feature with noise modulation, and a cor-responding G.8261 test template to satisfy the needs of various clock tests for PTN wireless backhaul.

• Includesaround-trip-delay(RTD)testingfunction.• Theindustry’sleadingswitchingtestfunctionsupportseventtriggeringonmultiple

ODU and customer levels. Includes optional parallel and multi-trigger sources.• Providestheindustry’sleading64VC-4,192VC-3,andSTM16/OC-48full-rate

multi-channel test function, and supports OTU1 and OTU2 for each ODU particle mappingSDH/SONETloadmulti-channeltesting.

• OTN scheduling functions include ODU0/ODU1 to OTU2 single-level ormultilevel scheduling, support for ODUFlex, client signal mapping, and multi-channelOTN.FullysupportsthelatestG.709/2009standards.

• Fully supports two online testmodes: transparent pass-through and enhancedpenetration. Includes SONET/SDH and OTN online monitoring and on-linewarning/errorinsertion,costoverrides.

ONT-503/506 ModuleE+Jitter-E

ONT Optical Network Tester

5

ONT-506/503 Optical Network Tester Order Number

ONT-506 Optical Network Tester 6 slot host box 3062/01

ONT-503 Optical Network Tester 3 slot host box 3075/01

Module-E 10G/2.5G XFP/SFP slot 10G/2.5G test module 3061/92.05

Module-E 10G XFP slot 3061/92.10

Jitter Module 10G-E 1310/1550 nm dual-wavelength 3061/90.76

Jitter Module 10G-E 1550 nm 10G 3061/90.75

Jitter 10.3G-E 10.3G 3061/90.70

Jitter 10.7G-E 10.7G 3061/90.78

Jitter Module 2.5G-D 1310/1550 nm dual-wavelength 3061/90.67

Jitter 2.5G-D 1550 nm 2.5G test module 3061/90.66

Jitter 2.7G-D 2.7G 3061/90.68

Jitter 1.25G-D 1.25G 3061/90.69

Software options Order Number

10GigE LAN 10G LAN test software 3061/93.47

1G Ethernet 1G Ethernet test software 3061/93.43

Lower Rates SDH/SONET low speed SDH/SONET test software 3061/93.34

SDH/SONET Single Channel 3061/93.36

OTN 2.7G 2.7G OTN test software 3061/93.49

OTN 10.7G 10.7G OTN test software 3061/93.57

Wander 10/11G 10G speed wander software 3061/93.95

Wander 10/11G Expert 3061/93.97

Wander 2.5/2.7G (software) 2.5G/2.7G wander test software 3061/93.92

Wander2.5/2.7G Expert 3061/93.89

Wander DS1/E1+BITS E1/T1 clock test 3061/93.96

Wander BITS Expert (hardware option) 3061/90.74

ESMC G.8264 SSM test 3061/93.63

Ordering Information

6

The industry’s most advanced, portable, versatile, and integrated test platform covers error, warning, switching, delay, overhead, pointer, clock synchronization, optical power, frequency offset, wander and jitter, and can be applied to a variety of applications such as development, production, installation, commissioning, and maintenance.

PTN Features • Highprecision1310/1550nmjitterandwanderfeatures,fullycompliantwiththeMTS-8000TransportModuleITU-TO.172AnnexesVIIandVIII.

• IncludesfunctionsforE1/DS1signaljitter,wandercharacteristics(TDEVandMTIE),wandertolerance,wandertransmissiontesting,andawander-gener-ation feature modulated with corresponding noise to meet the need for clock testing for PTN wireless backhaul.

• AdvancedAPSswitchingtimetestandaround-trip-delay(RTD)testfeature.• Provides the industry’s most complete 10 Mbps-10 GE Layer 1-4 EthernettestingwithRFC2544,VLAN,Q-in-Q,VPLS,MPLS,multi-stream,andfullsupportfortheITU-TY.1564standard.

Please contact your JDSU representative for ordering information.

T-BERD® 8000 Scalable Multitest Platform

T-BERD 8000™ Integrated Field Application Tester

7

Key Benefits • Maximizes ROI with a modular, field-upgradeable tester that seamlessly

expands into future technologies and interfaces. • Providesanindustry-leading,multi-port10Gmodularplatformfornetwork

field installation and advanced troubleshooting.• Guaranteesend-customersatisfactionwithdeepapplication layer testing fordata(TrueSpeed™perRFC6349),voice(VoIP),andvideo(IPTV).

• Promotes an efficient service and network management life cycle withintegrated installation tools and advanced troubleshooting analysis in a single test instrument.

• ReducesinstallationandtroubleshootingtimeswithautomatedJ-Completetesttools that follow best practices and provide repeatable methods and procedures with easy-to-understand results.

• ExtendstheleadingportfolioofT-BERD/MTSportabletestsolutions.TheT-BERDproductsuitewascreatedbyexpertstosimplifynetworkdeploymentand is trusted by leading service providers around the world.

Applications • TestsandtroubleshootsconvergedEthernet/IPbackhaulfor10Mbpsto10G

interfaces and captures and analyzes packets. • TestsLayers1-3Ethernet/IPSLAswithanautomated, enhancedRFC2544/SAMCompleteperITU-TY.1564.

• Tests TDM/PDH to SONET/SDH at OC-3/STM-1 to OC-192/STM-64,includingservice-disruptionmeasurementsandpath-overhead(POH)capturewith triggers.

• Enables installation and maintenance of OTN networks up to 11.1 G andincludesaninterfacewithODU-0supportforEthernetclientinterfaces.

• Validatesnetworksynchronizationforqualityofexperienceonmobileapplica-tions.

• Emulatesa1588v2masterclock/slaverecoverytoensureproperpoint-to-point(PTP)messagepropagationandtoverifypacket-delayvariation(PDV).

• VerifiesaccurateSyncEfrequencysynchronizationandEthernetsynchroniza-tionmessagechannel(ESMC)messagepropagation.

• ReadyforpackettransportnetworksusingMPLS-TP.• SupportsJ-Complete,anexclusivesuiteofautomatedtesttoolsfromJDSU.• Supports SFP and XFP pluggable optics including 50 GHz C-band tunable

XFPsPlease contact your JDSU representative for ordering information.

T-BERD® 6000A Compact Network Test Platform

T-BERD 6000A and 8000 Multi-Service Application Module (MSAM)

8

Key Benefits • All-in-onehandheldtooldesignedtoreducethecomplexityofmulti-technol-

ogy testing. • Optimizedforfieldease-of-usewhileaddressingemergingnetworktechnolo-

gies. • Guarantees maximum efficiency and success in the evolution of carrierEthernetandmobilebackhaulnetworks.

• Ensuresservicelifecyclemanagement,integratingbothinstallationandtrou-bleshooting capabilities in one instrument.

• Automates servicesverificationwith supportof the J-Complete suiteof testtools.

TheT-BERDproductsuitewascreatedbyexpertstosimplifynetworkdeploymentand is trusted by leading service providers around the world.

Applications • SixT-BERD5800configurations:

− Single-anddual-portEthernetversions− WithorwithoutTDM/PDHinterfaces− FullyloadedTDM/PDHto10GE,SONET,andSDH

• Layer 1-3 Ethernet/IP SLA verification with Class of Service testing thatincludesautomated,enhancedRFC2544tests.

• SupportforemergingEthernetsynchronizationtestingincluding1588v2andSyncEverification.

• BERtestinguptoOC192/STM-64,servicedisruption,andcircuitmonitoringonTDM/PDH/SONET/SDHinterfaces.

• SupportsPTNevolutionwithMPLS-TPtechnology.• SupportstheJ-Completeautomatedsuiteoftestapplications.Please contact your JDSU representative for ordering information.

T-BERD® 5800 Handheld Network Tester

T-BERD 5800 Handheld Network Tester

9

The industry’s highest-performance, modular, and portable tester, with full supportformultiple-accessandmetro-interconnecttechnology(includingxDSL,copper,T1/E1,fiber,andEthernet), canmeet theneedsofapplications suchasPTN access layer opening, maintenance, and optimization.

PTN Features • Achievesfull-speedportcoveragefrom10Mbpsto1GEforEthernetnetworktestingonasingletestplatform,andfullymeetstheneedsoffutureLTEandIPnetworks.MeetstheneedsofEthernetaccess-layertestapplicationsinvideoand mobile backhaul.

• Complete10Mbpsto1GELayers1-4EthernetsupportforRFC2544,VLAN,Q-in-Q,VPLS,MPLS,andmulti-stream.

Ordering Information

HST-3000 Portable PTN Business Tester Order Number

HST3000 Non-Copper mainframe HST-3000 host HST3000-NG2Ethernet SIM for HST-3000 Ethernet test module HST3000-ETH Optical Ethernet option for HST-3000 HST3000-OPTETH Adv.IP Suite - PING and Through Mode support HST3000S-IP PING Advanced IP Directory Multiple Streams option for HST HST3000-MSTR HST-3000 Soft Carrying Case CC-120101

HST-3000 Ethernet Module

HST-3000 Ethernet Handheld Tester

10

TheSmartClassEthernetproductisaneasytouse,cost-effectivetestingsolutionforbasicphysicallayercabletesting,Layers2/3trafficgeneration,andfullRFC2544 testing.The rugged, battery operated, application-specific test tool letsfield technicians turn-upEthernet and IP services by running anRFC2544test or by following a set of methods and procedures. The SmartClass product comes in two major configurations, one a loopback-only device and the other featuringfulltrafficgeneration.

Applications • QuicklyverifybasicEthernetbackhaulperformanceon10/100/1GEwithanautomatedRFC-2544test.

• VerifyClassofServiceswithuptoeightindependenttrafficstreams.• SupportstestinginMPLS/VPLSnetworks.

• Cost-effectiveloopdeviceforend-to-endLayer2/3tests. Please contact your JDSU representative for ordering information.

Fiber Inspection, Cleaning and Test Solutions

SmartClass Ethernet

SmartClass Ethernet

HP3 Series Fiber Inspection and Test System with Compact Video Display and

P500i Digital Analysis Microscope

HP3-60 Kit with P5000i Digital Analysis Microscope and Visual Fault Locator

As fiber penetrates further into next-generation networks, proactively inspecting and cleaning each connection point is no longer optional, but critical. Optimized physical performance of fiber connections is imperative to deliver future-proof and reliablePTNandLTEnetworks.Today’s fiber technicianneeds tools thatprovide a seamless workflow for inspecting, cleaning, testing, and troubleshoot-ingafiberlinkthatalsodrivesbehavior,bestpractices,andfieldefficiency.JDSUoffers essential fiber-handling tools in fast, portable, and easy-to-use systems for anyfiber technician.TheP5000iDigitalAnalysisMicroscopewithFiberChek-PRO™makesitfastandeasytocertifythateveryconnectioninyournetworkisoptimizedandcomplianttoIECStandardpass/failthresholds.

Ordering Information

Product Description Order Number

Fiber Essentials Tool Kit: Dual-mag (200/400X) FBP probe microscope and tips, FIT-HP2-60-P4 inspection and test system with 400X PCM, FFL-050 visual fault locator, cleaning tools, utility carrier, carrying case.

FIT-S205-PRO

Inspection Kit: Dual –mag (200/400X)FBP probe microscope and tips, HD2 Display with 200x PCM and adaptors, case

FBP-SE05

Utility Carrier System for FBP-SE05 FBPP-UC2Digital PASS/FAIL Analysis kit: P5000i, FiberChekPRO Software, tips and Case FBP-SD101 Digital PASS/FAIL Analysis & Test kit: P5000i, MP-60 w/ FiberChekPRO, tips, adaptors and Case FBP-SD103Visual fault locator (compact) FFL-050 Visual fault locator (ruggedized) with 1.25 mm adapter FFL-100Fiber Field Cleaning Kit FCR-CLN-01

11

Todeliverhigh-performance,best-in-classPTNorLTEnetworks,itiscriticalthatfiber systems are correctly installed and tested. This ensures that the physical layer meets the minimum optical performance specification requirements to deliver reliable services. JDSU offers a wide array of solutions from fiber identifiers to insertion-loss and power-measurement tools. These tools are ideal for installation and maintenance applications for standard multimode and single-mode fibers andCWDM/DWDMsystems. Ordering Information

Fiber is the lifeline to your customers. The physical integrity of the fiber is critical for optimum service delivery. It is imperative to properly characterize the performance ofthephysicallayertoensurereliability.TheMTS-2000HandheldModularTestSetsolutionaddressesthecomplexityoffibertestinganddrivesmaximumefficiencyfor technicians to perform all the tests required to ensure optimized performance andhigh-qualityfibernetworks.TheMTS-2000handlesthewidestrangeoftestap-plicationsincludingOTDR,FiberComplete™automaticIL/ORL,CWDManalyzer,andconnectorinspectionwithIECpass/failanalysis.Thissolutionmakeseventhemost novice fiber tech an instant fiber expert. Ordering Information

OTDR and Optical Power Measurement Solutions

Power Measurement and Fiber Identification Solutions

Product Description Order Number

OMK-35P Singlemode SmartPocket™ Test is a dual-wavelength optical test kit with a single-port laser source and a power meter with a UPP interface for power level and loss test measurement in access, metro and core networks.

2127/02

OLS-35 1310/1550 nm Singlemode Light Source 2303/11 OCC-55 Optical Channel Checker for CWDM wavelengths. 2277/40OCC-56 Optical Channel Checker for DWDM wavelengths 2277/41Live Fiber Identifier- integrated OPM adaptors, software and case. FI-60

Product Description Order Number

MTS-2000 Handheld Modular Test Set EM2000TOTDR module: Last Mile range 1310/1550nm E4126LM OTDR module: Metro-Access range 1310/1550nm E4126MAFiberComplete™ Module: Metro-Access OTDR, IL, ORL 1310/1550nm E4126FCOMP-MALight source option for OTDR Module (through OTDR port) E41OTDRLSPower Meter option for OTDR Module (through OTDR port) E4OTDRPM Optical Spectrum Analyzer for CWDM –COSA-4055 2301/01Digital PASS/FAIL Analysis & Test kit: P5000i with FiberChekPRO, 7x tips and Case FBP-MTS-101

FI-60 Live Fiber Identifier (left), OLS-35 SmartPocket Optical Light Source (center), SmartClass OCC-55

Optical CWDM Channel Checker (right)

MTS-2000 Handheld Modular Test Set

12

Test Example 1: End-to-End MPLS-TP Flow and OAM Verification Byconnectingthetestinstrumenttotheproximalanddistalconverterorrouterport,youcanusetheT-BERD6000A/8000MSAMorT-BERD5800togenerateandanalyzeend-to-endMPLS-TPflows.Inthisexample,eachtestinstrumentisconfigured with terminal mode to measure the flow of simulation customer data sent along each direction.

Subsequently, analysis can be done on each test instrument for detected test flow,

andtheinstrumentwilldisplayflow(bandwidthutilizationorCIR),packetloss(FL),round-tripdelay(FD),thespeeddeviation(FDV),andotherkeyindicatorsaswellasMPLS-TPheaderinformation.Usingthismode,youcanconductOAMgeneration and validation and analyze OAM control layer flow during operation maintenance or troubleshooting. CCM can be used to verify the link connection, andloopback/linktrackingcanbeusedtodeterminethefaultisolation.

MPLS-TP Provider BMPLS-TP Provider A

Customer service(such as Ethernet)

MPLS-TPFW

MPLS-TPLSP

MPLS-TPSegment layer

Mark 14Mark 13 Mark 14

Mark 13Mark 14

Mark 13

OAL

OAMACHOAL

OAM

OALACHOAM

CALOAM

LEP OALACHOAM

LEP

CALOAM

LEP

PW OALACHOAM

LEPPW

pa1a

Ca1a

Ca1a Cb1b

Ca2a Ca2a

13

Test Example 2: MPLS-TP Flow Real-Time Network Monitoring WhentheT-BERD6000A/8000MSAMorT-BERD5800isconnectedtothemirror port or a free port on the router, it can be used to monitor and analyze MPLS-TPflowandimplementMPLS-TPchannelscan.Inthisexample,thetestinstrumentisconfiguredtomonitormodetodetectthereal-timeMPLS-TPflowswitched from the switch to this mirror port. Subsequently, you can analyze the detected flow on the test instrument interface, and use a real-time display of bandwidth utilization, user channel, frames received,andotherkeyflowstatistics,aswellasMPLS-TPheader informationsuchasserviceprovider(SP),thecustomerID,andprioritizeditems.

Test Example 3: Ensure Accurate Time Synchronization Verification for 1588v2 Networks Time precision in a 1588v2 network depends on the PTP information exchange between the master and slave clock that is received constantly. Network data layertrafficcanaffectthePTPinformationtransmissiondelaybecauseallofthemshareaNEflowprocessor.Therefore,theuseofahigh-endnetworkwillaffect the performance of PTP information, and eventually lead to synchroniza-tionofvariation.MeasurefromthemainNEandNEinformationexchangedbetweenthePTPpacketdelayvariation(PDV)todeterminetheproblem.ByusingtheT-BERD6000A/8000MSAMorT-BERD5800tomeasureacertainperiod of PDV, PTP will be able to verify that the information transmission is normal.Tosimulate themaster/slaveclocknetworkelement, thePTPprotocolon the PTN network packet capture statistics, verified by analyzing the function of PTP protocol and configuration of various parameters meeting specifications, package contents from the agreement to provide specific time synchronization visual performance. The use of instruments in the fault node test, through the instrument interaction between the main clock, performance analysis of network latency, PDV, performance degradation, and failure time synchronization, pinpoints the specific location.

14

TDMCE IWF NTE NTE

TDM

MSAM-1588v2 Slave

PTP information

Primary reference source

Main

Ethernet network

Synchronous packet delay variation

Ethernet network

Ethernet

Test Example 4: PTN One-Way Latency TestTime precision in a 1588v2 network depends on the network’s two-way trans-mission latency symmetry. It is asymmetric in actual networks, so the accurate measurement of one-way latency in network links is extremely crucial to the directjudgmentoftheslaveclock’srecoveryquality(ifitmeets<3usindicators)in latency compensation and post-launch maintenance of network opening. In addition, one-way delay of the business is vital to the existing businesses that requireaveryhighreal-timequality.ByusingtheT-BERD6000A/8000MSAMorT-BERD5800,userscandeploythistest.

Network

Testlnterface External GPS Rx

AC

1PPS lnput

TOD lnput

BNCAdapter

RS-232-USB

Adapter

15

Test Example 5: Synchronous Ethernet Clock Synchronization TestSynchronousEthernetisanothervitaltechnologyforaPTNtorealizeclocksynchronization. Assessing network performance is crucial for new network launches and post-launch maintenance. JDSU offers the industry’s most complete testsolution.ItssynchronousEthernettestingensuresclocksynchronizationthroughoutLayer1,andisthetechnologythatadoptstheEthernetlinkstreamto restore the clock. Therefore, it has high accuracy and fast convergence, and its upper-packet PDV has no effect on the performance of clock synchronization. The T-BERD 6000A/8000 MSAM or T-BERD 5800 can support synchronousEthernet testing, realize Sync-E generation and receiving verification tests, andvalidate if a synchronized network is working properly by measuring G.8264SSM messaging rates and analytical validation of messages. The specific physical performance(jitterandwander)ofsynchronousEthernetcanbemeasuredandvalidated by using the advanced JDSU Optical Network Tester, the ONT-5xx, whichistheindustry’sleadingsynchronousEthernettestingtool.

Jitter/WanderGeneration

Jitter/WanderTolerance

Jitter/WanderTransfer

Jitter measurement Event detection

Jitter-free

SyncE SyncE SyncE

SyncESyncESyncE

with Jitter with Jitter

Jitter measurement

Event detectionWander measurement Wander measurement

Reference signal Reference signal Reference signal

With Wander With WanderBITS

Jitte

rW

ande

r

north americatoll free: 1 866 228 3762fax: +1 301 353 9216

Test & Measurement Regional Sales

latin americatel: +1 954 688 5660fax: +1 954 345 4668

asia pacifictel: +852 2892 0990fax: +852 2892 0770

emeatel: +49 7121 86 2222fax: +49 7121 86 1222

www.jdsu.com/test

Productspecificationsanddescriptionsinthisdocumentsubjecttochangewithoutnotice.©2012JDSUniphaseCorporation301730650000112PTN-NETWORK.BR.NSD.TM.AEJanuary2012