jcb attachments for midrange machines20tartoz... · 2011. 11. 20. · sunflowers 400 talc 880...

JCB ATTACHMENTS FOR

MIDRANGE MACHINES

JCB MIDRANGE ATTACHMENTS Issue 11

Optimum

After

By specifying a Genuine Attachment your customer can be assured

that every attachment will:

� Be a perfect match to the carrier machine

Every product in the JCB Attachments range is fully approved and will

perform at it’s most efficient when partnered with a JCB machine.

You can be sure when specifying a JCB Attachment that it will ensure

that the machine will operate at its optimum performance.

Fits the machine

Value for money

Optimum

StockAfter

WHAT IS A GENUINE ATTACHMENT?

COMPLETING THE SOLUTION

JCB MIDRANGE ATTACHMENTS Issue 1 2

� Be supported by a World Class Team

The fitment of an approved Attachment to a machine gives the

customer complete peace of mind that both the JCB machine and

attachment are fully backed by a seamless JCB warranty package

supported by the JCB dealer network.

� Maximise machine utilisation

By partnering the machine with a range of attachments it will maximise

its utilisation, creating a greater return their investment.

Fit for purpose

Own warranty

Machine warranty OK

Performance

sales

Performance

sales

3 JCB MIDRANGE ATTACHMENTS Issue 1

JCB ATTACHMENTS SALES GUIDE

Welcome to the new JCB Attachments Sales Guide, this book provides information

on the JCB range of attachments including part numbers, specifications and selling

information.

The aim of this book is to help you to guide customers towards the purchase of

Genuine JCB Attachments enabling them to complete their work efficiently and

safely.

The Contents Section lists the products with the relevant page numbers; other useful

information includes density ratings, conversion factors, material weights, carriage

pick up dimensions and industrial fork classifications.

Where applicable further information on Sweeper Collectors, Earth Drills, Dipper

Mounted Hammers and Handheld Equipment are included as separate sections.

A number of JCB machines now offer carriage options allowing attachments to be

further utilised over a wider range of carrier machines, please take into consideration

the lift capacity of the carrier machine when specifying any attachment.

JCB reserves the right to change specifications without notice.

Illustrations shown are representative only and may include optional equipment

and accessories.

Whilst every effort has been taken to ensure that all the information provided is

accurate, the reader should always be considerate of safety when selecting

attachments for specific machines and applications.

If in doubt please contact JCB Attachments, contact details on the back page.

Welcome

4JCB MIDRANGE ATTACHMENTS Issue 1

CONTENTS

Products Section

Backhoe A

Compact Loadall B

Loadall, Telemasters & RTFL’s C

WLS D

Sweeper Collectors E

Earthdrills F

Hammers G

Handheld Tools H


SHOVEL DENSITY RATINGS

Introduction

The amount of material a shovel can hold in relation to capacity of the shovel and

the material density; a figure that will help to determine which shovel to use for a

particular material. A density rating of 100kg/m3 means that the density of the

material to be handled can be maximum of 100kg/m3 for the loader-shovel

combination being used. Density rating is calculated by dividing the loader’s

operating capacity by the shovel capacity.

1. To determine the correct sized shovel for the machine and application you need

to carry out the loading calculation. This will ensure safe machine operation.

2. To do this determine the material being used and from the table on the next page

use the listed material density (kg/m3).

3. Multiply the required capacity of the shovel by the material density to get an

overall mass of material. Add weight of shovel to that mass to get a total operating

mass.

4. Ensure that the mass is within the recommended quantity capacity or SWL of

machine.

Example

60'' GP Shovel. Heaped capacity = 0.37m3

Loading dry loose gravel with a material density of approximately 1602 kg/m3

1602 kg/m3 x 0.37m3 = 593kg + weight of the shovel

or earth/sand/gravel density = 1750 kg/m3

1750kg/m3 x 0.37m3 = 647.5kg + weight of the shovel

This shovel is matched to the material density and the capacity of a 165 Robot Loader

Recommended Operating Capacity = 650kg

For lighter materials larger shovels can be used

See Material Weights for material density rating


CONVERSION FACTORS

from to multiply by

Lengthmm in 0.039 37m ft 3.280 8m yd 1.093 6km mile 0.6214

Areamm2 in2 0.001 550cm2 in2 0.155 0m2 in2 1 549m2 ft2 10.764m2 yd2 1.196km2 mile2 0.386 1ha acre 2.471

Volumemm3 in3 0.000 061 02cm3 in3 0.061 02cm3 litre 0.001 00m3 ft3 35.32m3 yd3 1.308litre in3 61.01litre m3 0.001 00litre UK gal 0.220litre UK pt 1.760US gal UK gal 0.832 7

in mm 25.40ft m 0.304 8yd m 1.914 4mile km 1.609

in2 mm2 645.2in2 cm2 6.452in2 m2 0.000 645 2ft2 m2 0.092 903yd2 m2 0.8361mile km2 2.590acre ha 0.404 7

in3 mm3 16 390in3 cm3 16.39litre cm3 1 000ft3 m3 0.028 32yd3 m3 0.764 6in3 litre 0.016 39m3 litre 1 000UK gal litre 4.546UK pt litre 0.568 3UK gal US gal 1.201 0

from to multiply by

Mass (weight)g oz 0.035 27g lb 0.002 205kg lb 2.205tonne ton 0.984 2

Densitykg/m3 lb/yd3 1.686ForceN lbf 0.224 8N kgf 0.102 0

Pressurebar psi 14.50bar Pa 100 000kg/cm2 psi 14.22kg/cm2 bar 0.980 7ForceNm lbf ft 0.737 6kgf m lbf ft 7.233

PowerkW hp 1.341CV,PS hp 0.986 3kW Btu 3 412

oz g 28.35lb g 453.6lb kg 0.453 6ton tonne 1.016

lb/yd3 kg/m3 0.593 3

lbf N 4.448kgf N 9.807

psi bar 0.068 95Pa bar 0.000 0100psi kg/cm2 0.070 32bar kg/cm2 1.020

lbf ft Nm 1.356lbf ft kgf m 0.138 3

hp kW 0.745 7hp CV, PS 1.014Btu kW 0.000 293 1


MATERIAL WEIGHTS

Material kg/m3

Ashes soft coal w/clinkers 560-835soft coal ordinary 640-720

Barley 625Bauxite 2550Beans shelled 770Bone meal 915Bones crushed 595Brewers grain dry 450

wet 910Cement (Portland) 1500Chalk crushed 1400Charcoal (Oak) 560Chips pulpwood 290Clay damp 1760

dry excavated 1010Clay & gravel dry 1602

wet 1760Clay brick or tile (hard) 2050Coal 640-930Cocoa beans 640Coffee beans 640-720Coke lump loose 510Concrete 1380-1780Copper ore 4200Copra 350Corn dry shelled 720Cotton seed dry 400Cullet 1280-1600Earth dry, loose 1220

wet, packed 1850Earth sand gravel 1600-1900Fertiliser potash 1090

urea 720Flax seed 720Granite 2650Gravel dry loose 1450-1690

wet, sand & gravel 2020Gypsum 2550Hay straw bales 320Ice crushed 600Limestone 2480

loose crushed 1540-1600marble 2720

Lye 1700Malt dry 720Marble loose 1540Oats 420Ore 1700-2450Paper 930Peanuts shelled 280


MATERIAL WEIGHTS

Material kg/m3

Peas dry 770Phosphate granular 720

rock 1440Potash 1090Potatoes 700Quartz granular 2650Rye 720Rice 710Riprap 1250Rubber scrap 800Salt 2160

coarse 560fine 770

Sand dry 1440-1680wet 2020

Sand & gravel dry loose 1440-1680wet 2020

Sand foundry 1520Silica dry 1520

Sandstone 2290Sewage sludge 960Shale 1470Slag (iron) 2750Slate 2750Snow fresh 80-200

wet 240-800Soda ash light 450

dense 960Sodium aluminate ground 1150Soy beans 740Starch 1540Steel chips uncrushed 400-1360

crushed 1280-2400Sugar beet pulp wet 560

dry 200Sugar cane knifed 270

unknifed 370Sugar raw 1590Sulphur lumpy 1330

powdered 880Sunflowers 400Talc 880Taconite 1440-1710Wheat 770Wood cedar 350

chips 290oak 865pine Norway 550sawdust 240-320

Zinc ore 4050crushed 2560

Zinc oxide 370


Compact Tool Carrier

Used on 520-40, 520-50, 524-50, 525-50 & 527-55 machines

Compact Tool Carrier Dimensions

All dimensions in millimetres

Blank Location BracketPart No: 980/88043

(Part Number is for two brackets)

71

44.5

600 (max)

248.

2

26.3

530 (min)

LOADALL CARRIAGES

Blank attachment location brackets are available from JCB Service to allow non-JCB

attachments to be converted for use with Loadall machines.

It is strongly recommended that these brackets are used where possible.

Three types of carriage used on Loadall machines are shown below.


Tool Carrier Dimensions

552 (max)

29.5

34 to 35

480

95

449 (min)



LOADALL CARRIAGES

Tool Carrier

Used on 520-55, 520S, 526-55 & 526S machines

58.5

12

35

630

1079 (max)

995 (min)



Used on all other Loadall machines

Q fit


LOADALL CARRIAGES

Industrial Fork Classifications

Mounting class Lift truck capacity P (mm) Q (mm)at load centre (kg)

1A up to 999 at 500mm 331 76

1B 331 114

2A 1000 to 2500 at 500mm 407 76

2B 407 152

3A 2501 to 4999 at 500mm 508 76

3B 508 203

4A 5000 to 8000 at 600mm 635 127

4B 635 254

5A 8001 to 10099 at 600mm 728 127

5B 728 257

This diagram illustrates the fitting of a Sideshift to a Loadall. The order of fitting is the

same for other machines.

The Sideshift is attached to the fork frame similar to a standard fork fitment. Once the

Sideshift is fitted then the forks are fitted to the Sideshift as the original fork frame.

Quickhitch Fork Frame

Sideshift Forks

Industrial Carriage only

� Designed to give precise loading/unloading� Gives 150mm (6 in.) of movement either side of the machine centreline.


Machine Dimension Dimension Dimension Model A B C

2CX & MIDI CX 231.5 164 32

3CX 343 175 45

4CX 343 175 45

BUCKET PIN CHART

A

B

ØC

A

JCB MIDRANGE ATTACHMENTS Issue 1 A.1

2CX

GP Bucket

Manual Quickhitch

� GP Buckets are available in a variety of widths to increase machine versatility

� A rolled top section increases structural integrity

� Side plate reinforcement offers additional strength and rigidity

� Replaceable wearparts increase durability and extend the working life

� Provides greater safety and less effort for the operator to change buckets and attachments

� Durable design, with harden steel jaws that keep wear to a minimum

� Mechanically operated with spring loaded lock released by use of a tommy bar.

� The safety lock pin prevents accidental loss of bucket or attachment

Part Number Type of Quickhitch Weight (kg)

980/A4618 Manual 55

Part Number Width Width Capacity Duty Teeth Weight(in) (mm) (m3) (kg)

531/99300 9 230 0 - 028 Standard Standard 52528/00400 12 300 0 - 028 Standard Standard 55528/00600 14 350 0 - 037 Standard Standard 57528/00800 16 400 0 - 046 Standard Standard 63528/01000 18 450 0 - 053 Standard Standard 68528/01200 24 600 0 - 079 Standard Standard 87528/01400 30 750 0 - 104 Standard Standard 101

Optional weld in bucket pins 980/86024 are available on ALL the above Buckets

JCB MIDRANGE ATTACHMENTS Issue 1A.2

2CX

Ditch Maintenance Bucket


� Drainage holes reduce weight/density during operation


980/05400 47 1200 0.12 Standard N/A 116

Optional weld in bucket pins 980/86024 are available

GP Shovel

� Designed for maximum performance and durability

� Teeth and toeplate options for even longer service life

� Available as Direct Mount or Quick Hitch option


335/03553* 54 1372 0.6 Standard N/A 344335/03554* 72 1850 0.6 Standard N/A 365335/03590* 78 2000 0.7 Standard N/A 401528/02600** 54 1372 0.8 Standard N/A 296528/02800** 72 1850 0.6 Standard N/A 260528/03000*** 54 1372 0.8 Standard N/A 288528/01600*** 72 1850 0.6 Standard N/A 283528/02900*** 76 1950 0.7 Standard N/A 326

* Direct Mount suits Mk111 ** Direct Mount suits Mk11 *** Quickhitch Mount suits Mk11

A


6 in 1 Shovel

� Maximises loader productivity giving the operator a wider choice of options

� The options are dozing, loading, digging, grabbing, spreading and grading


� Available as Direct Mount or Quick Hitch option


128/12142* 72 1850 0.6 Standard N/A 457528/00100** 72 1850 0.6 Standard N/A 419528/04800** 83 2110 0.7 Standard N/A 500980/70700*** 54 1372 0.4 Standard N/A 382528/02700*** 72 1850 0.6 Standard N/A 448

* Direct Mount suits Mk111 ** Quickhitch Mount suits Mk11 *** Direct Mount suits Mk11

2CX

� Designed for safe and accurate placement of infill materials

� Available as LH or RH options

� Airmaster machine must be fitted with a counterweight 335/07513

� Available as Direct Mount or Quickhitch option

Side Tip Shovel

Part Number Width Width Capacity Duty Left Hand/ Weight(in) (mm) (m3) Right Hand (kg)

980/90165* 73 1850 0.62 Standard Left Hand 500980/90166* 73 1850 0.62 Standard Right Hand 500980/89812* 79 2000 0.67 Standard Right Hand 520980/89811* 79 2000 0.67 Standard Left Hand 520980/88955** 73 1850 0.62 Standard Right Hand 499980/84105** 73 1850 0.62 Standard Left Hand 499980/88255*** 77 1950 0.65 Standard Left Hand 510980/62800*** 77 1950 0.65 Standard Right Hand 503

* Direct Mount suits Mk111 ** Quickhitch Mount suits Mk11 *** Direct Mount suits Mk11

APlease ensure the Loader Quickhitch fitment (MkII or MkIII) is determined before ordering the shovels below

Compactor

Part Number Width Length Frequency Centrifugal Force Weight (mm) (mm) (kg)

980/03200 305 739 33.3Hz @ 2000 rev/min 16.3kN @ 33.3HZ 172

� For trench reinstatement and general ground compaction

� Dipper mounting ensures the operator is fully protected from the effects of vibration

� Connects to the high flow circuit, the unit only requires 24 lpm

� In built protection valve safeguards the unit from hydraulic pressure surges

� Suitable for direct or quickhitch mount

Earth Drill

� For accurate and precise drilling

� Standard 2" Hexagon drive

� Maximum torque drilling power 6000Nm

� Choice of standard or heavy duty flights.

� Replacement teeth and pilot bits available for greater service life

Part Number Maximum recommended standard Flight

980/A4327 1200mm (47”) length, 900mm (36”) diameter*

* See section F for details of flights

2CX


A

2CX

Industrial Forks

Part Number Length (in) Length (mm) Class Type

335/04008 54 1370 2 Fork Frame*528/05100 54 1370 2 Fork Frame**980/14300 47 1200 2B Industrial Fork547/08500 47 1200 2B Industrial Fork547/02500 42 1067 2B Industrial Fork

* MKII Hitch Pick Up** MKIII Hitch Pick Up

� Enables the machine to be utilised for loading and stacking.

� Forks rated to 2 tonnes. (Lift governed by machine lift capacity).

� Load Guard offers greater operator safety.


Kerbmaster

� The safe and simple way of manipulating kerbstones up to 180kgs in weight

� Incorporates hose burst check valve for failsafe operation

� Wearparts give good gripping properties without damage to the kerbstone

� Manual rotation offers line man total control of kerb alignment

� Maximum grab opening 170mm

Part Number Description

980/A0724 Manual Rotation Kerb Grab980/90862 Kerb Grab installation kit required

A

2CX


Sweeper Collector

� Heavy duty canopy gives added strength to take the knocks of every day use

� Floating frame system automatically follows the ground contour ensuring sweeper output

� Large diameter steel and polypropylene brush segments for superior finish

� Sweeping and hopper emptying hydraulically operated from the cab

� Available with dust suppression and/or gutter brush options

Part Number Width (in) Width (mm) Capacity (Litres) Type Integral Tank

980/90515 82 2100 270 SC210 No980/90516 82 2100 270 SC210 Yes

For additional information on Sweeper Collectors, see section E

� For utility work, building, construction and groundcare

� Durable solid body design

� Sealed for life accumulator

� Excellent power to weight ratio provides maximum performance

� Includes moil and chisel

Hammermaster

Part Number Hammermaster Tool Diameter (mm) Operating Weight (kg)

980/90241 HM265Q 65 200

* See section G for details

A


GP Bucket

Manual Quickhitch



� Sideplate reinforcement offers additional strength and rigidity


MIDI CX


980/A4618 Manual 55


531/99300 9 230 0 - 028 Standard Standard 52528/00400 12 300 0 - 028 Standard Standard 55528/00600 14 350 0 - 037 Standard Standard 57528/00800 16 400 0 - 046 Standard Standard 63528/01000 18 450 0 - 053 Standard Standard 68528/01200 24 600 0 - 079 Standard Standard 87528/01400 30 750 0 - 104 Standard Standard 101

A� Provides greater safety

and less effort for the operator to change buckets and attachments

� Durable design, with harden steel jaws that keep wear to a minimum

� Mechanically operated with spring loaded lock released by use of a tommy bar.


MIDI CX

Ditch Maintenance Bucket




980/05400 47 1200 0.12 Standard N/A 116

Optional weld in bucket pins 980/86024 are available


� Designed for maximum performance and durability


� Quickhitch mount for rapid changeover times, increases productivity

GP Shovel


331/12904 56 1430 0.30 General Purpose Standard 156512/03500 62 1550 0.37 General Purpose Standard 160512/07400 62 1550 0.57 GP Utility Shovel Standard 254

A


� Designed for safe and accurate placement of infill materials

� Available as LH or RH options

� Designed to operate from the loader auxiliary service

� Allows the operator to face the traffic and reduces potential traffic hazards

� Quickhitch mount for rapid changeover times increases productivity

MIDI CX

6 in 1 Shovel

Side Tip Shovel

� Maximises loader productivity giving the operator a wider choice of options

� The options are dozing, loading, digging, grabbing, spreading and grading



Part Number Width Width Capacity Duty Description Weight(in) (mm) (m3) (kg)

980/78100 63 1600 0.39 Standard Right Hand 335980/78200 63 1600 0.39 Standard Left Hand 335


512/04400 62 1550 0.30 Standard Standard 348243/20193 69 1750 0.41 Standard Standard 389

A

Construction Shovel

� Designed for heavy duty applications


MIDI CX

Low Back Shovel

� Designed for the operator to work with greater safety

� The lower back and longer base enables the operator to see the front edge of the toeplate during operation

� Teeth or bolt on toeplate options

� Quickhitch mount for rapid changeover times



980/88002 62 1550 0.39 Heavy Duty N/A 250980/88077 69 1750 0.44 Heavy Duty N/A 265


980/88001 62 1580 0.35 Low Back N/A 200242/20658 68 1730 0.50 Low Back N/A 202

A


Industrial Grapple

Part Number Width Width Capacity Duty Weight(in) (mm) (m3) (kg)

980/88820 62 1550 0.53 Twin ram 405980/88994 66 1690 0.56 Twin ram 445

� Heavy duty units with independent twin ram grapple

� Allows material wider than the unit width to be clamped

� Bolt on toeplate options


MIDI CX

Muck Forks

� Single or twin ram option

� Fitted with top grab that aids material retention

� Fully Protected hydraulics


Part Number Width Width Capacity Duty Weight(in) (mm) (m3)

980/44600 59 1550 0.60 Single ram 202980/88222 69 1700 0.75 Twin ram 248

A


MIDI CX

Earth Drill


� Standard 2" Hexagon drive


� Choice of standard or heavy duty flights.


Part Number Maximum recommended standard Flight

980/A4327 1200mm (47”) length, 900mm (36”) diameter*


Industrial Forks & Frames

� Enables the machine to be utilised for loading and stacking

� Forks rated to 2 tonnes (lift governed by machine lift capacity)

� Load guard offers greater operator safety

Part Number Length (in) Length (mm) Class Type

531/99400 41 1050 2B Industrial Forks512/03000 48 1220 2 Industrial Frame512/03100 46 1200 N/A Industrial Loadguard

A


MIDI CX

Kerbmaster




� Manual rotation offers line man total control of kerb alignment



980/A0724 Manual Rotation Kerb Grab980/90862 Kerb Grab installation kit required

� For utility work, building, construction and demolition

� Durable design, virtually maintenance free



� Supplied “Ready to Go” with hoses, hanger bracket and moil and chisel

Hammermaster


980/90867 HM165Q 50 120


A


Manual Quickhitch

� Provides greater safety and less effort for the operator when changing buckets and attachments

� Durable design, with hardened steel jaws that keep wear to a minimum

� Mechanically operated with spring loaded lock released by use of a tommy bar


Bucket





980/89817 9 230 0.040 Standard JCB Supertooth 83980/89818 12 300 0.050 Standard JCB Supertooth 87980/89881 14 350 0.070 Standard JCB Supertooth 105980/89990 16 400 0.090 Standard JCB Supertooth 107980/89991 18 450 0.120 Standard JCB Supertooth 114980/89993 24 600 0.170 Standard JCB Supertooth 136980/89994 32 800 0.240 Standard JCB Supertooth 167980/89995 36 900 0.280 Standard JCB Supertooth 179

993/36400 Bucket Pin Kit - Weld in980/89764 Bucket Pin Kit - Bolt on (9” 230mm buckets)340/00584 Bucket Pin Kit (12” 300mm buckets)


980/88833 Manual 95

3CX/4CX

A


3CX/4CX

Bucket (Ribbed)

� Ribbed Buckets are available in a variety of widths to increase machine versatility


� Additional wear strips fitted to the rolled back shell offer additional strength and rigidity



980/90005* 10 250 0.040 Ribbed JCB Supertooth 108980/90006** 12 300 0.060 Ribbed JCB Supertooth 117980/90007 16 400 0.075 Ribbed JCB Supertooth 119980/90008 18 450 0.090 Ribbed JCB Supertooth 127980/90009 20 500 0.100 Ribbed JCB Supertooth 136980/90010 24 600 0.120 Ribbed JCB Supertooth 155980/90011 32 800 0.170 Ribbed JCB Supertooth 194980/90012 36 900 0.240 Ribbed JCB Supertooth 210

Optional weld in bucket pin kit 993/36400 is available, * 340/00582 Bucket Pin Kit Bolt in (10”/250mm Buckets) ** 340/00584 Bucket Pin Kit Bolt in (12”/300mm Buckets)980/A5083 Bucket Pin Kit Bolt in (16”/400mm Buckets and above)

Grading Bucket

� Double box section cross beam increases structural integrity.

� Ditch Maintenance/Grading buckets have a central reinforcing plate that gives added strength and rigidity.

� Drainage holes to reduce weight/density during operation.


980/86061 60 1500 0.220 Standard N/A 150980/86060 72 1800 0.300 Standard N/A 172

A

Dedicated Bucket

� Dedicated Buckets are available in a variety of widths to increase machine versatility

� This range has been achieved by the use of Finite Element Analysis throughout the entire design


� Replaceable wearparts increasedurability and extend the working life

Dedicated Ditch Maintenance Bucket



3CX/4CX



980/62600 9 230 0.035 Standard Standard 90980/62300 12 300 0.040 Standard Standard 95980/62400 16 400 0.090 Standard Standard 104980/61500 18 450 0.120 Standard Standard 121980/61600 24 600 0.170 Standard Standard 144980/61700 30 750 0.210 Standard Standard 175980/61800 36 900 0.300 Standard Standard 197

These buckets are for use with dedicated Quickhitch 980/88854


980/66000 60 1500 0.220 Standard N/A 142

These buckets are for use with dedicated Quick Hitch 980/88854

A


Taper Ditch Bucket

Part Number Width Width Capacity Taper Angle Teeth Weight(in) (mm) (m3) (kg)

531/02700 66 1676 0.060 300 N/A 185537/16100 42 1067 0.100 600 N/A 111

� Choice of angles for steep or shallow sided ditches

� Standard JCB wearparts and extended sideplate reinforcement for extended service life

� Double box section cross beam increases structural integrity.

3CX/4CX

Jaw Bucket


531/23200 12 300 0.07 Ribbed JCB Supertooth 225531/20100 18 450 0.14 Ribbed JCB Supertooth 255531/19800 24 600 0.20 Ribbed JCB Supertooth 280

� Two attachments in one, a standard bucket

and a powerful hydraulic jaw

� JCB designed for maximum compatibility, performance and durability

� Additional wear strip provides increased strength and resistance to abrasion

� Direct mount only

A

3CX/4CX


Tilting Grading Bucket


980/89975 60 1500 0.16 Standard N/A 340

� Hydraulically operated tilting grading bucket

� Double acting auxiliary circuit required

Ripper Tooth

Part Number Description Weight (kg)

529/03000 Ripper Tooth - Cast 74990/81700 Ripper Tooth - Fabricated 91

� Choice of fabricated or cast units

� Breaks up hard surfaces such as frozen or compacted earth, concrete or tarmac

� Replaceable tip for evenlonger service life

A


3CX/4CX

Earthdrill

Part Number Maximum recommended standard flight

980/A3596 1200mm length, 900mm (36”) diameter*



� Standard 2" hexagon drive


� Choice of standard or heavy duty flights


Kerbmaster




� Available with manual or full hydraulic rotation options



980/A0724 Manual Rotation Kerb Grab980/89941 Kerb Grab installation kit (required with the Kerb Grab above)980/A0725 Hydraulic Rotation Kerb Grab980/89942 Kerb Grab installation kit (required with the Kerb Grab above)

* Quickhitch compatible Hanger Bracket 335/08502 available

A

3CX/4CX

Patch Planer

� Precise planing with depth adjustment up to 115mm

� Full 400mm width cutting drum

� Hydraulic flow required is 90 - 200 l/min

� Easily adjustable wheel configuration allows planing to kerb/grid edge

� Replacement tooth picks are available to extend unit life


980/88802 Patch Planer


Compactor

� For trench reinstatement and general ground compaction

� Dipper mounted ensures the operator is fully protected from the effects of vibration

� Connects to the high flow circuit, the unit only requires 24 lpm

� In built protection valve safeguards the unit from hydraulic pressure surges

� Suitable for direct or quickhitch mount

Part Number Width Length Frequency Centrifugal Force Weight(mm) (mm) (kg)

980/32000 305 739 33.3Hz @ 2000 rev/min 16.3kN @ 33.3HZ 178.5kg

A

3CX/4CX


Concrete Skip

Part Number Description Weight (kg)

547/51600 Concrete Skip 152

� Allows safe and accurate placement of up to 400 litres

of concrete

� Manually operated sprung lever and chute for even greater accuracy

� Can be either fork mounted orcrane hook mounted for better access

Fork Mounted Hook

� Fully tested and approved - 1 tonne capacity

� Attachment secures firmly to pallet forks

� Fork mounting allows quick and easy installation

Part Number Description Capacity

126/01539 Fork Mounted Hook 1 Ton Capacity

A

3CX/4CX

Weld On Brackets

� Supplied as a pair ready for field fit

� Weld on bracket allow the conversion of direct mount shovels to quickhitch mount

Part Number Description Duty

980/88160 Weld On Brackets To Fit GP Shovel980/88161 Weld On Brackets To Fit 6 in 1 Shovel


Street Pads

� Supplied complete, ready to fit.

� Simple installation

� Manufactured from high quality materials for long service life


Part Number Description Serial Number

980/47200 Street Pads Serial No. 290000 to 460000980/88215 Street Pads Serial No. 460001 Onwards

A

3CX/4CX


Sweeper

� Full 2430mm width sweeping.

� LH or RH 20 degree mechanical angling.

� Sweeps to gutter edge.

� Quickhitch mount for rapid changeover times.

Part Number Width (in) Width (mm) Description

980/34500 96 2438 Road Sweeper

Pole Planter

� Full hydraulic clamping for the safe handling and planting of poles

� Side roller option allows lateral movement on the pole before grabbing

� Mounted on the loader arms to maintain machine stability and operator safety

� Connects to the loader auxiliary service, a 12 volt electric supply required to operate the divertervalve

� Optional A Frame mounted to the top of the stabiliser legs offers greater stability when carrying the pole over a distance

Part Number To fit Capacity (kg) Pole Dia (mm) Weight (kg) Description

980/68000 3CX/4CX 1700 150 - 450 630 Pole Planter with side roller*980/88428 3CX/4CX 1700 150 - 450 610 Pole Planter**

* Requires harness (P12 - 980/88430, P21 - 980/89451)** Requires harness (P8 - 980/69900, P12 - 980/88430, P21 - 980/89451)

Options: A frame (M300001 - M460000) 980/39700A frame (M460001 on) 980/88429

A

3CX/4CX

Sweeper Collector

Part Number Width (in) Width (mm) Capacity (litres) Type Integral Tank

980/90507 96 2400 400 SC240 No980/90508 96 2400 400 SC240 Yes

Options: 3CX/4CX Quickhitch Mounting Frame 980/90417 Pallet fork mounting frame 980/90418, Gutter brush (Optional)

For additional information on Sweeper Collectors, see section E

� Heavy duty canopy gives added strength to take the knocks of every day use

� Floating Frame system automatically follows the ground contour ensuring sweeper output

� Large diameter steel and polypropylene brush segments for superior finish

� Sweeping and hopper emptying hydraulically operated from the cab

� Available with dust suppression and/or gutter brush options


Loader Quickhitch

� Allows rapid changeover of quickhitch compatible attachments

� Available as manual, hydraulic or hydraulic with integral forks

� Ag/Tool carrier version is compatible with Loadall Q/fit dimensions

Part Number Type Serial Number Weight(kg)

124/56500 Mechanical Serial No. 290000 to 400000 130980/89487 Mechanical Serial No. 400001 Onwards 209980/89488 Hydraulic Serial No. 400001 Onwards 223980/89808 Hydraulic with Integral Forks Serial No. 941510 Onwards 308126/03126 Hydraulic Loadall Q/Fit Pick Up Serial No. 400001 Onwards 165

A

3CX/4CX


General Purpose Shovel


� Toeplate drilled to accept either teeth or toeplate

� Direct mount or JCB Loader Quickhitch compatible options


125/36700 88 2235 1.00 General Purpose GP Direct Mount 355125/36800 93 2350 1.10 General Purpose GP Direct Mount 368124/62700 96 2438 1.10 General Purpose GP Q/Hitch 414

Heavy Duty Shovel


� Designed specifically for hard dig situations

� Direct mount or JCB Loader Quickhitch compatible options


125/38900 88 2235 1.00 Heavy Duty HD Direct Mount 449126/00186 93 2350 1.10 Heavy Duty HD Q/Hitch 485125/36900 93 2350 1.10 Heavy Duty HD Direct Mount 461125/37000* 93 2350 1.30 Heavy Duty HD Direct Mount 557

* 4CX only

A

3CX/4CX


6 in 1 Shovel

� Total versatility in all material handling duties from simple loading to precision grading and including grabbing, dozing, backblading and digging.

� Optional weld on fork kits to increase versatility

� Operates from standard loader auxiliary circuit


126/00583 88 2235 1.00 6 in 1 Direct Mount 698126/00578 93 2350 1.10 6 in 1 Direct Mount 761126/00581 93 2350 1.00 6 in 1 Q Hitch 766126/00649 93 2350 1.20 6 in 1 Q Hitch 799126/00593 93 2350 1.20 6 in 1 Direct Mount 805126/01526 96 2438 1.30 6 in 1 Direct Mount 847126/01532 96 2438 1.30 6 in 1 Q Hitch 881

Side Tip Shovel

� Ideally suited for areas where tipping space is limited and the load needs to be accurately placed

� Available in left hand or right hand configurations



980/89067 90 2290 1.13 Right Tip RH Q Hitch 750980/89066 90 2290 1.13 Left Tip LH Q Hitch 750

A

3CX/4CX


Snowblade

� Incorporates 25°( to either side) angling to enable road/blade clearance

� Fitted with replaceable rubber wear strip for protection against protruding ironwork

� 2290mm width with blade angled at 25º

� Additional jockey wheel aids in steadier travel/use


980/89971 90 2290 N/A Hydraulic Snowblade 490

Industrial Forks

� The SWL figure is for forks, not the machine. Machine spec' to be checked for maximum lift capacity

� Fork sizes are Fork Width xFork Thickness x Fork Length

� Forks supplied in pairs fully tested and certified

Part Number Width x Thickness Class SWL tonne per fork Weightx Length(mm) at 500mm load centre (kg)

123/01374 100 x 45 x 1200 2B 2.0 120

A

3CX/4CX


Industrial Fork Frame


� Designed to confirm to industrial fork standards

� Adjustable fork centres allow fork positioning for the safest loading point

Part Number Width Width Class To Fit Weight(in) (mm) (kg)

980/07200* 59 1500 2 Quickhitch Compatible 204

* Loadguard 980/14200 to fit Fork Frame

Hammermaster

� For utility work, building and construction

� Durable solid body design



� Includes moil and chisel


980/90239 HM385Q 80 312980/90245 HM495Q 95 419


A

3CX/4CX


Hydraulic Kits

� Designed by JCB for JCB machines to give optimum performance

� Comprehensive fitting instructions and technical backup

� No invalidation of machine warranty

Hydraulic Kits 3CX 4CX

Rockbreaker Installation Yes YesAir Conditioning Yes YesHBCV Kits, Shovel/Boom Yes YesHand Held Tool Circuit* Yes YesSRS Kit Yes YesLoader Auxillary Yes YesShovel Mounted Fork Kits Yes Yes

Note: Please check APS/Parts Pro for latest kits and older machine kits available

A

B.1JCB MID RANGE ATTACHMENTS Issue 1

B

GP Shovel

COMPACT LOADALLApplicable Machines - 520-40, 520-50, 524-50, 525-50 & 527-55

� Rolled back shell for easy material ejection

� Substantial toeplate gives long lasting protection and minimal wear

Industrial Grapple

� Heavy Duty units with independent twin ram grapple




Part Number Width Width Capacity To Fit Weight(in) (mm) (m3) (kg)

514/00500* 69 1750 0.70 Compact Tool Carrier 300510/83600 69 1750 0.70 Compact Tool Carrier 290514/01200* 76 1950 0.70 Compact Tool Carrier 310510/83700 76 1950 0.90 Compact Tool Carrier 330514/00800* 78 2000 0.70 Compact Tool Carrier 320331/12483 80 2050 1.00 Compact Tool Carrier 305994/10989 90 2286 1.00 Pin and Cone 410

*Spill Guard


980/89113 78 2000 0.70 Compact Tool Carrier 535

B.2 JCB MID RANGE ATTACHMENTS Issue 1

COMPACT LOADALL

Wastemaster Skip

Part Number Capacity (m3) To Fit Thickness (mm) Weight (kg)

980/89009 1.10 Fork Mount 3 230980/89014 1.50 Fork Mount 3 245980/89017 1.10 Fork Mount 5 300980/89018 1.50 Fork Mount 5 330

� Lattice base framework enables access from any side for fast placement, removal and unloading

� The fork retainer ensures the Wastemaster skip is safely attached during transportation and unloading

� Strengthened top sections improve durability

� The locking mechanism and safety clip on the tipping device ensure complete safety during loading and transportation

Crane Hook

� Quickhitch compatible

� Designed for movement of suspended loads

� Fully tested and approved - 1 tonne capacity

Part Number Capacity (tons) Fitment Weight (kg)

993/50100 1 Quickhitch 106

B


COMPACT LOADALL

Floating Fork Frame

� Quickhitch compatible frames for pallet forks

� Floating pin style fitment for uneven ground and loads

� Complete with fork pin

Pallet Forks

Part Number Width x Thickness Pivot pin SWL tonne per fork Weightx Length(mm) dia (mm) at 500mm load centre (kg)

545/82101 80 x 40 x 1067 45 1.00 97545/82102 100 x 40 x 1200 45 1.30 105514/02400 100 x 45 x 1200 45 1.80 105514/02200 125 x 40 x 1200 45 1.80 103545/82121 100 x 40 x 1067 50.7 1.55 97545/82118 100 x 40 x 1067 50.7 1.30 98545/82126 125 x 40 x 1200 50.7 1.85 104545/82136 100 x 45 x 1200 50.7 1.85 118545/82134 100 x 45 x 1067 50.7 1.85 120

Part Number Pin Size (mm) Fitment Weight (kg)

514/00200 45.0 Compact Tool Carrier 125514/01600* 50.7 Compact Tool Carrier 151

* 527-55 Must use 50.7mm Diameter Pin Size


� Choice of sizes and pin fitments to cover most machines

� Fork sizes are Fork Width x Fork Thickness x Fork Length

B


COMPACT LOADALL


� Enables the machine to be used for loading and stacking

� Various length options available to reduce possible damage when stacking

� Supplied with certification (lift governed by machine capability)


514/00700 43 1100 2 Compact Tool Carrier 106514/01500* 51 1300 3 Compact Tool Carrier 235

* 527-55 Must use Class 3 Carriage & Forks

Sideshift Carriage

� Gives the ability to position the load without moving the machine

� Sideshift fits between a industrial fork carriage and the industrial forks

� Choice of class 2 or 3


515/20034 43 1100 2 Class 2 Frame Compatible 70332/U5615 47 1200 3 Class 3 Frame Compatible 165

B


Industrial Forks

� The SWL figure is for forks, not the machine. Machine spec' to be checked for maximum liftcapacity

� Choice of sizes and class fitments to cover most machines


COMPACT LOADALL


547/02500 100 x 45 x 1067 2B 1.90 115547/08500 100 x 45 x 1200 2B 1.90 122547/07900 100 x 50 x 1067 3B 2.34 130547/08600 125 x 50 x 1200 3B 2.92 186

Rehandling Shovel

� Rolled Backs - Easy Release of Material

� Drilled Toe Plates - To Accept Teeth or Bolt on Toe Plates

� Wear Strips on Base - To Minimise Wear of Bucket Shell



B


Grain/Potato Bucket

� Rolled Backs - easy release of material

� 6 mm plate shell

� 8mm end plates

� Round bar edges - prevents damage to root crops

� Heavy duty Hardox 275 toeplate (250mm x 30mm)

� Substantial Hardox 250 wearplates (125mm x 12mm)


980/26800 69 1750 1.00 Compact Tool Carrier 340980/26900 78 1676 1.20 Compact Tool Carrier 364980/89841 84 2100 1.40 Compact Tool Carrier 496980/73700 84 2100 1.40 Pin and Cone 496980/90159 90 2286 2.00 Pin and Cone 630980/90161 90 2286 2.50 Pin and Cone 756

Sweeper Collector


980/90515 82 2100 270 SC210 No980/90516 82 2100 270 SC210 Yes

Sweeper Collectors to be used with Mounting Frame/Compact Tool Carrier 980/89011 orPallet Fork Frame 980/90418. Gutter Brush Optional

For additional information on Sweeper Collectors, refer to section E

COMPACT LOADALL

� Heavy duty one piece canopy for superior structural strength

� Floating mounting frame allows the sweeper to follow the contours of the ground

� Optional internal water tank provides class leading visibility

� Hydraulically controlled collection hopper is operated from the cab

� Combination steel and polyproplyene brush for superior sweeping action

B


Power Grab

� Choice of KV or Hardox tines to suit all applications

� Powerful twin top rams to give optimum penetration and tearout

� Wide opening jaw with curved top tines give the ability to operate close to walls

COMPACT LOADALL

Part Number Width Width Capacity Carriage Further Weight(in) (mm) (m3) Information (kg)

980/89869 72 1800 1.00 Compact Tool Carrier KV Tines 432980/90084 84 2100 1.20 Compact Tool Carrier KV Tines 479980/90576 90 2286 1.90 Pin and Cone KV Tines 704980/90124 90 2286 1.90 Pin and Cone 9 Hardox 6 KV 829

Muck Fork and Grab

� Hoses Fitted As Standard - Ready to Go to Work

� Wear Plates on Fork Base - Extended Operating Life

� Side Tines - Minimise Spillage

� 5 Bar Double Profile Top Grab - Superior Strength


980/90144 90 2286 1.90 Pin and Cone 10 Standard Tines 814980/90134 90 2286 1.90 Pin and Cone 10 KV Tines 778994/10905 96 2438 2.20 Pin and Cone 9 Hardox Tines 984

B


COMPACT LOADALL

Manure Fork

� Available in a choice of 3 widths with either KV or Hardox Tines

� Fork unit can be retro fitted with top grab to further its capabilities

Multi Shovel

Part Number Width (in) Width (mm) Capacity (m3) Carriage Weight (kg)


� The JCB multi shovel combines a shovel and top grab to give a multi-purpose tool capable of performing a number of tasks


� Rolled back profile to allow easy release of material

� Not for use in arduous waste rehandling applications


980/89957 72 1800 1.00 Compact Tool Carrier 8 KV Tines 295980/90069 84 2100 1.20 Compact Tool Carrier 9 KV Tines 314980/90625 90 2286 1.90 Pin and Cone 10 KV Tines 518980/90628 90 2286 1.90 Pin and Cone 9 Hardox Tines 558

B


Shear Grab

� Cuts grass and maize silage from the clamp ensuring high feed quality

� KV tines provide extra strength

� Heavy duty design for improved durability

Single Bale Spike

� Suitable for handling round bales up to 1.8m diameter

� Single KV tine

� Anti-rotation tine for improved stability

Part Number Carriage Further information Weight (kg)

980/25100 Compact Tool Carrier KV tines 75980/88011 Pin and Cone KV tines 80

COMPACT LOADALL


980/88007 67 1700 0.80 Compact Tool Carrier KV Tines 445980/88008 66 1675 0.80 Pin and Cone KV Tines 450

B


Twin Bale Spike

� Suitable for handling two round bales up to 1.8m diameter

� Also capable of handling large square bales

� Features 6 KV tines for maximum bale stability

Wrapped Bale Clamp (single bale)

� Twin roller mounted on KV tines to allow unit to be used as twin spike

� Roller design eliminates damage to bale wrap

COMPACT LOADALL


980/88009 Compact Tool Carrier KV tines 120980/88010 Pin and Cone KV tines 120


980/25800 Compact Tool Carrier KV tines (in rollers) 120980/88016 Pin and Cone KV tines (in rollers) 120

B


COMPACT LOADALL

Hydraulic Kits





B

GP Shovel

LOADALL



� Side wear plates protect bucket shell


980/88130 90 2286 1.10 Tool Carrier 365980/A5063 90 2286 1.00 Q Fit 410994/10989 90 2286 1.00 Pin & Cone 410547/38900 90 2286 1.40 Q Fit 430

6 in 1 Shovel

� Total versatility in all material handling duties from simple loading to precision grading and including grabbing, dozing, backblading and digging.



Part Number Width Width Capacity Description Hitch Weight(in) (mm) (m3) (kg)

980/37200 83 2235 0.67 6 in 1 Shovel Tool Carrier 750994/A2083 90 2350 1.10 6 in 1 Shovel Q Fit 680

C.1JCB MID RANGE ATTACHMENTS Issue 1

Loadall Machine compatibility - The following section differs from the rest of the book as it isgoverned by hitch type. Rather than list out all the Loadall model variants against each attachmentthey have been identified by hitch type. As covered in the previous pages the main hitches availableare the Qfit, Tool Carrier and Compact tool carrier, you will also find attachments compatible withPin and Cone & Manitou. As the attachments are listed only by hitch type consideration for thecarrier machines lift capacity will need to be calculated against the capacities and weights shown.

TM310 and RTFL machine attachments are also covered in the Loadall section due availability ofeither Pin & Cone or Qfit options on the TM machines and the availability of a Multihitch* toconvert the RTFL to Q fit pick up. Again the carrier machines lift capacity will need to be calculatedagainst the capacities and weights shown. *Multihitch = 548/41500 (requires auxiliary loader circuit)

C

C.2 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL

Heavy Duty Shovel


� Designed specifically for hard dig situations


980/88028 90 2286 1.50 Heavy Duty Shovel Q Fit 671980/88027 90 2286 1.50 Heavy Duty Shovel Tool Carrier 620

Rehandling Shovel

� Rolled back shell gives easy release of material

� Drilled toe plates to accept teeth or bolt on toe plates

� Wear strips on base minimise wear of bucket shell


980/36000 83 2110 0.80 Rehandling Shovel Tool Carrier 286980/72600 83 2110 1.20 Rehandling Shovel Tool Carrier 362980/27400 90 2286 1.00 Rehandling Shovel Q Fit 360980/89538 90 2286 1.00 Rehandling Shovel Tool Carrier 360547/37600 90 2286 1.20 Rehandling Shovel Q Fit 416980/60800 90 2286 1.40 Rehandling Shovel Tool Carrier 400980/27500 90 2286 1.50 Rehandling Shovel Q Fit 454980/88445 90 2286 1.80 Rehandling Shovel Tool Carrier 460545/47076 96 2438 1.00 Rehandling Shovel Q Fit 530

C


LOADALL

Industrial Grapple

� Heavy Duty units with independent twin ram grapple





980/88340 90 2290 0.75 Tool Carrier 700994/10564 90 2290 0.75 Q Fit 807

Wastemaster Skip

Part Number Capacity (m3) To Fit Thickness (mm) Weight (kg)

980/89009 1.10 Fork Mount 3 230980/89014 1.50 Fork Mount 3 245980/89017 1.10 Fork Mount 5 300980/89018 1.50 Fork Mount 5 330

� Lattice base framework enables access from any side for fast placement, removal and unloading

� The fork retainer ensures the Wastemaster skip is safely attached during transportation and unloading

� Strengthened top sections improve durability

� The locking mechanism and safety clip on the tipping device ensure complete safety during loading and transportation

C


LOADALL

Swivel Hook

� Fork mounted design allows safe lifting using any machine fitted with pallet forks (dependent on lift capacity of carrier machine)

� Secured by fork retention pins for maximum safety

� Fully tested and supplied with certificate for added peace of mind

Part Number Capacity (tons) Fitment Weight (kg)

545/70200 4 Fork mount 27

Extension Jib

� Lattice framework provides a strong, lightweight design

� Fully tested and supplied with certificate for added peace of mind

� Supplied with swivel hook

Part Number Description To Fit Capacity (kg) Weight (kg)

980/36800 4 metre extension jib Tool Carrier 350 95545/41600 4 metre extension jib Q Fit 400 115980/89977 3.7 metre HD extension jib Q Fit 650 280

C


LOADALL

Trussmaster

� All JCB Trussmasters are JCB Q-fit compatible enabling fast fitment and changeover

� Fully tested and approved for safe operation

� Hydraulic version enables infinite extension positions for all sizes and applications

� Fitted with a 'steadying yoke' as standard for safe transportation of roof trusses

� Supplied with handbook and flipcharts to assist with installation and operation

� Only to be used with machines with stabiliser legs

Part Number Description To Fit Capacity (kg) Weight (kg)

980/89205 Trussmaster Mechanical Q Fit 300 - 150* 230980/89528 Trussmaster Hydraulic Q Fit 300 - 175* 320

* Fully retracted and fully extended

C

Concrete Skip

Part Number Description Carriage Weight (kg)

547/51600 400 Litre Capacity Concrete Skip Fork mount 152

� Allows safe and accurate placement of up to 400 litres

of concrete

� Manually operated sprung lever and chute for even greater accuracy

� Can be either fork mounted orcrane hook mounted for better access

Wastemaster Shovel

� Supplied with bolt on toeplate to prolong shovel life

� One or two piece top grab for clamping bulky, uneven loads

� Heavy duty design for working in waste environments

Part Number Width Width Description To Fit Weight(in) (mm) (kg)

980/A1004 90 2286 Single top grab 2.08m3 capacity Q fit 1065980/89976 90 2286 2 piece top grab 1.60m3 capacity Q fit 1180

Wastemaster Shovel with top grab Wastemaster Shovel with 2 piece top grab


LOADALL

Wastemaster Fork

� Hardox tines fitted as standard

� Full width wear strip for extended service life

Part Number Width Width Description To Fit Weight(in) (mm) (kg)

980/A1009 90 2286 Single top grab 1.90m3 capacity Q fit 725

C


LOADALL

Fork Positioner

� Allows change of fork position from the cab, reducing downtime

� Uses existing round bar pallet forks

� No manual handling required means increased operator safety

� 385mm - 1100mm variable fork spread

Part Number Pin Size (mm) Fitment Capacity (kg)

980/A1010 50.7 Q Fit 4000980/A1012 57.0 Q Fit 5000

Floating Fork Frame

� Quickhitch compatible frames for pallet forks

� Floating pin style fitment for uneven ground

� Complete with fork pin

Part Number Pin Size (mm) Fitment Weight (kg)

545/47096 50.7 Tool Carrier 135994/10446 57.0 Q Fit 190

C


LOADALL

Pallet Forks

Part Number Width x Thickness Pivot pin SWL tonne per fork Weightx Length(mm) dia (mm) at 500mm load centre (kg)

545/82121 100 x 40 x 1067 50.7 1.55 97545/82118 100 x 40 x 1067 50.7 1.30 98545/82126 125 x 40 x 1200 50.7 1.85 104545/82136 100 x 45 x 1200 50.7 1.85 118545/82134 100 x 45 x 1067 50.7 1.85 120545/82130 100 x 50 x 1067 57 2.05 130545/82132 100 x 50 x 1200 57 2.05 140


� Choice of sizes and pin fitments to cover most machines



� Enables the machine to be used for loading and stacking

� Various length options available to reduce possible damage when stacking



545/47017 54 1370 2 Tool Carrier 130545/40000 54 1370 2 Q Fit 150545/40200 78 1980 2 Q Fit 210545/40800 59 1500 3 Q Fit 250

C


LOADALL

Sideshift Carriage

� Gives the ability to position the load without moving the machine

� Sideshift fits between a industrial fork carriage and the industrial forks

� Choice of class 2 or 3


515/20034 43 1100 2 Class 2 Frame Compatible 70332/U5615 47 1200 3 Class 3 Frame Compatible 165

Industrial Forks

� The SWL figure is for forks, not the machine. Machine spec' to be checked for maximum liftcapacity

� Choice of sizes and class fitments to cover most machines



547/02500 100 x 45 x 1067 2B 1.90 115547/08500 100 x 45 x 1200 2B 1.90 122547/07900 100 x 50 x 1067 3B 2.34 130547/08600 125 x 50 x 1200 3B 2.92 186

C

� 6 mm plate shell

� 8mm end plates

� Rolled Backs - easy release of material

� Round bar edges - prevents damage to root crops

� Heavy duty Hardox 275 toeplate (250mm x 30mm)

� Substantial Hardox 250 wearplates (125mm x 12mm)


980/73700 84 2100 1.40 Pin and Cone 496980/89436 90 2286 1.50 Q Fit 510980/89437 90 2286 1.75 Q Fit 590980/89438 90 2286 2.00 Q Fit 630980/89439 90 2286 2.50 Q Fit 756980/89471 90 2286 1.50 Tool Carrier 510980/89472 90 2286 2.00 Tool Carrier 630980/90159 90 2286 2.00 Pin and Cone 630980/90161 90 2286 2.50 Pin and Cone 756980/90160 90 2286 2.00 Manitou 630980/90162 90 2286 2.50 Manitou 756980/89842 96 2438 2.25 Q Fit 600980/89440 96 2438 2.75 Q Fit 780994/10874 96 2438 3.00 Q Fit 790994/10907 96 2438 2.75 Manitou 780

Sweeper Collector


980/90507 96 2400 400 SC240 No980/90508 96 2400 400 SC240 Yes

Sweeper must be used with a mounting frame to connect to machineQ Fit Only 980/90419, Q Fit & Forks 980/90420, Tool Carrier 980/89013Gutter Brush (Optional)See section E for further details

LOADALL






� Combination steel and polyproplyene brush for superior sweeping action

C

Grain/Potato Bucket


LOADALL

Beet Basket

� Suitable for handling root crops

� Spaced bar design to allow small material to drop through

� Round bar protection on leading edge to minimise crop damage


980/88020 90 2286 1.90 Tool Carrier 435980/26400 86 2250 1.90 Q Fit 440980/26500 90 2286 1.50 Q Fit 435980/26600 90 2286 2.10 Q Fit 465994/10875 96 2438 3.00 Q Fit 650

Power Grab

� Choice of KV or Hardox tines to suit all applications


� Wide opening jaw with curved top tines give the ability to operate close to walls


980/90574 90 2286 1.90 Q Fit KV Tines 707980/90575 90 2286 1.90 Tool Carrier KV Tines 728980/90576 90 2286 1.90 Pin & Cone KV Tines 704980/90577 90 2286 1.90 Manitou KV Tines 718980/90121 90 2286 1.90 Q Fit 9 Hardox 6 KV 831980/90122 90 2286 1.90 Tool Carrier 9 Hardox 6 KV 852980/90124 90 2286 1.90 Pin & Cone 9 Hardox 6 KV 829980/90125 90 2286 1.90 Manitou 9 Hardox 6 KV 815

C

Muck Fork and Grab

� Hoses Fitted As Standard - Ready to Go to Work

� Wear Plates on Fork Base - Extended Operating Life

� Side Tines - Minimise Spillage

� 5 Bar Double Profile Top Grab - Superior Strength


980/90141 90 2286 1.90 Q Fit 10 Standard Tines 816980/90131 90 2286 1.90 Q Fit 10 KV Tines 780980/90136 90 2286 1.90 Q Fit 9 Hardox Tines 848980/90142 90 2286 1.90 Tool Carrier 10 Standard Tines 838980/90132 90 2286 1.90 Tool Carrier 10 KV Tines 802980/90137 90 2286 1.90 Tool Carrier 9 Hardox Tines 868980/90144 90 2286 1.90 Pine & Cone 10 Standard Tines 814980/90134 90 2286 1.90 Pine & Cone 10 KV Tines 778980/90139 90 2286 1.90 Pine & Cone 9 Hardox Tines 872980/90135 90 2286 1.90 Manitou 10 KV Tines 791980/90140 90 2286 1.90 Manitou 9 Hardox Tines 858994/10905 96 2438 2.20 Pine & Cone 9 Hardox Tines 975994/10876 96 2438 2.20 Q Fit 9 Hardox Tines 975994/10906 96 2438 2.20 Manitou 9 Hardox Tines 975


LOADALL

Manure Fork

� Available in a choice of 3 widths with either KV or Hardox Tines

� Fork unit can be retro fitted with top grab to further its capabilities

� Bracket options to suit Compact Tool Carrier, Q-Fit, Tool Carrier,

Pin & cone and Manitou


980/90623 90 2286 1.90 Q Fit 10 KV Tines 510980/90624 90 2286 1.90 Tool Carrier 10 KV Tines 532980/90625 90 2286 1.90 Pin & Cone 10 KV Tines 518980/90626 90 2286 1.90 Manitou 10 KV Tines 521980/90627 90 2286 1.90 Q Fit 9 Hardox Tines 550980/90628 90 2286 1.90 Pin & Cone 9 Hardox Tines 558980/90629 90 2286 1.90 Manitou 9 Hardox Tines 561

C


LOADALL

Multi Shovel

Part Number Width (in) Width (mm) Capacity (m3) Carriage Weight (kg)

980/88022 83 2110 0.75 Tool Carrier 670980/89656 90 2286 0.90 Tool Carrier 863980/89655 90 2286 0.90 Q Fit 910

� The JCB multi shovel combines a shovel and top grab to give a multi-purpose tool capable of performing a number of tasks


� Rolled back profile to allow easy release of material

� Not for use in arduous waste rehandling application

Shear Grab

� Cuts grass and maize silage from the clamp ensuring high feed quality

� KV tines provide extra strength

� Heavy duty design for improved durability


980/24900 66 1675 1.00 Q Fit KV Tines 475980/36500 66 1675 0.80 Tool Carrier KV Tines 443980/88008 66 1675 0.80 Pin & Cone KV Tines 450

C


LOADALL

Single Bale Spike


� Single KV tine



980/25200 Q Fit KV tines 75980/36300 Tool Carrier KV tines 75980/88011 Pin & Cone KV tines 80

Twin Bale Spike

� Suitable for handling two round bales up to 1.8m diameter

� Also capable of handling large square bales

� Features 6 KV tines for maximum bale stability


980/25000 Q Fit KV tines 120980/36200 Tool Carrier KV tines 120980/88010 Pin & Cone KV tines 120

C


LOADALL

Wrapped Bale Clamp (single bale)

� Twin roller mounted on KV tines to allow unit to be used as twin spike

� Roller design eliminates damage to bale wrap


980/25900 Q Fit KV tines (in rollers) 220980/36600 Tool Carrier KV tines (in rollers) 220980/88016 Pin & Cone KV tines (in rollers) 220

Grain Pusher

� Box section construction for extra durability

� Designed for placement of grain in storage

Part Number Width Width Capacity Carriage Spec Weight(in) (mm) (m3) (kg)

545/42300 90 2286 ? Q Fit 10’/3m Long 530980/88005 90 2286 ? Tool Carrier 10’/3m Long 535

C


LOADALL

Flat 8 Bale Grab

� Designed to pick up 8 standard bales at once

� Curved tines penetrate the bale to allow rehandling and stacking

� Hydraulically operated tines ensure the load is safely clamped

Part Number Sizes (mm) Spec Carriage Weight (kg)

980/40800 1000 x 1770 x 1800 8 Bale Tool Carrier 320980/25700 1000 x 1770 x 1800 8 Bale Q Fit 320

Big Bale Grab

� Strongly built unit to withstand the arduous application

� Designed for the safe moving, stacking and loading of bales



980/25600 1100 x 2400 x 1500 1 - 2 Bale Q Fit 450

C


LOADALL

Big Bale Triple Grab

� Designed to pick up 3 x 800 bales or 2 x 1200 at once

� Curved tines penetrate the bale to allow rehandling and stacking



980/A5498 2510 x 2510 3 Bale Q Fit 350

Heston Bale Grab

� Strongly built unit to withstand the arduous application

� Designed for the safe moving, stacking and loading of up to 2 Hesston Bales



980/88013 1530 x 1190 x 1260 2 Bale Q Fit 233

C


LOADALL

Log Grab

� For safe handling of loose timber or sawn bundles

� Available with fixed or sliding forks to suit various applications

� Hydraulically operated twin rams ensure the load is safely clamped

� Available in a variety of hitch pick ups to suit a variety of machine applications

Part Number Width (in) Width (mm) Capacity Carriage Weight (kg)

980/88035* 41 1050 2.0 Q Fit 397980/88036* 41 1050 2.0 Tool Carrier 390980/88038** 41 1050 2.0 Tool Carrier 450980/88037** 41 1050 2.0 Q Fit 445

* Fixed Fork ** Sliding Fork

Combination Forks

� For handling bulk maure /silage with top grab to aid load retention

� Twin rams coupled to a sliding frame ensure load is cleared from the tines

� Available in various widths and capacities to suit carrier machine

Part Number Width (in) Width (mm) Capacity Carriage Weight (kg)

980/35700 83 2110 1.5 Tool Carrier 700980/60300 90 2290 1.7 Tool Carrier 720980/24300 90 2290 1.9 Q Fit 740

C


LOADALL

Round Bale Spike (with Push Off)


� Hydraulically operated push off plate enables safe handling of bales at maximum lift


Part Number Carriage Weight (kg)

980/25400 Q Fit 170

Box Tipper

� For the safe handling and tipping of boxes with full 180° rotation

� Maximum operating capacity of 1 tonne

� Adjustable side and top arm to maintain a steady load during tipping operation

Part Number Carriage Weight (kg)

980/90609 Tool Carrier 615980/90610 Q Fit 615

C


LOADALL

Snowblade

� Incorporates 25°( to either side) fixed angling to enable road/blade clearance

� Fitted with replaceable rubber wear strip for protection against protruding ironwork

� 2290mm width with blade angled at 25º

� Additional jockey wheel aids in steadier travel/use

Part Number Width Width Capacity Carriage Weight(in) (mm) (m3) (kg)

980/89970 90 2290 N/A Q Fit 420

Scraperblade

� Suitable for light duty site and road clearance

� Incorporates 15° fixed angling to enable blade/road clearance

Part Number Width Width Capacity Carriage Weight(in) (mm) (m3) (kg)

545/44700 90 2290 N/A Q Fit 350

C


C

LOADALL

Weld On Brackets

� Supplied as a pair ready for field fit

� Weld on bracket allow the conversion of direct mount shovels to quickhitch mount

Part Number Description Pick UP

980/88042 Weld On Brackets Q Fit980/44700 Weld On Brackets Tool Carrier980/88043 Weld On Brackets Compact980/89852 Weld On Brackets Matbro P & C980/89867 Weld On Brackets Manitou

Quickhitch Carriage

� Allows the use of competitors attachments � Matching weld on brackets available(see above)

Part Number Machine Weight (kg)

160/14689 530’s, 540’s Manitou (Manual)160/14801 530’s, 540’s Pin & Cone332/D5164 526 Tool Carrier (Hydraulic)


C

LOADALL

Hydraulic Kits




Hydraulic Kits Loadall

Air Conditioning Yes


D.1JCB MID RANGE ATTACHMENTS Issue 1

Clam Shovel

406

GP Shovel


� Toeplate and side wear plates extend service life

� Twin ram design for extra power

� Toeplate to protect bucket shell

� Rear grading blade for longer wearing

Part Number Width Width Capacity Duty Toeplate Weight(in) (mm) (m3) kgs

273/00140 75 1900 0.75 General Purpose Bolt On 408273/00148 75 1900 0.75 General Purpose No 408


273/00189 69 1750 0.80 General Purpose Optional 275273/00139 75 1900 0.80 General Purpose Optional 305273/00145 75 1900 1.00 General Purpose Optional 340273/00146 75 1900 1.20 General Purpose Optional 360273/00153 75 1900 1.40 General Purpose Optional 400

D

D.2 JCB MID RANGE ATTACHMENTS Issue 1

Grain/Potato Shovel

406

Industrial Forks and Frame

� Toeplate level indicator aids the operator

� Substantial toeplate plus wear strips from the toeplate to the shovel back add protection in the major wear areas

� Rounded bar on the leading edges reduce potential damage to the crop


� Various fork length options available to reduce possible damage when stacking



980/90263 75 1900 1.20 Standard N/A 485

Part Number Length Length Class Description Weight(in) (mm) (kg)

273/00142 42 1067 2 Fork Frame and Forks 179*273/00144 47 1200 2 Fork Frame and Forks 187*

* Total weight of Forks and Frame

D


406

Muck Fork and Grab

� 1395mm grab opening for maximum productivity


� Curved tines allow operating close to walls

Part Number Width (in) Width (mm) Duty Weight (kg)

980/90637 84 2140 Standard 505

Sweeper Collector


980/90515 82 2100 270 SC210 No980/90516 82 2100 270 SC210 Yes

* These Sweeper Collectors are used with Mounting Frame 980/90736, Gutter brush (Optional)

Note: also fits 407 machine


D

� Spill guard as standard to prevent material falling on the machine


� Side wear plates prolongs bucket life

D.4 JCB MID RANGE ATTACHMENTS Issue 1

GP Shovel

409


332/R9605 77 1950 1.0 GP N/A 332332/R9607 77 1950 1.2 GP N/A 358332/R9608 83 2100 1.4 GP N/A 399332/R9610 87 2200 1.6 GP N/A 485

6 in 1 Shovel

� Twin ram design for extra power


� Rear grading blade for longer wearing

Part Number Width Width Capacity Toeplate Weight(in) (mm) (m3) (kg)

332/R7792 77 1950 0.90 No Teeth 404

D

Industrial Forks and Frame


� Various fork length options available to reduce possible damage when stacking


� Full width sweeping with optional Gutter Brush

� Optional gutter brush and gutter water sprinkler system available

� Suitable for light and general duty


Part Number Width (in) Width (mm) Type Integral Tank

980/90515 82 2100 SC210 No980/90516 82 2100 SC210 Yes

* The above Sweeper Collectors are used with Mounting Frame 980/90736, Gutter brush (Optional)



409

Sweeper Collector

Part Number Length Length Class Description Weight(in) (mm) (kg)

332/S8343 42 1067 2 Fork Frame and Forks 178*332/R9613 47 1200 2 Fork Frame and Forks 187*

* Total weight of Forks and Frame D

E.1JCB MID RANGE ATTACHMENTS Issue 1

EBasic Sweeper Collector

SC210 & SC240 SWEEPER RANGE

SC210 SC240

Operating width (mm) 2100 2400Overall width (mm) 2410 2724Overall length without mounting bracket (mm) 2030 2040Overall height (mm) 810 840Operating weight without mounting frame (kg) 705 740Hopper Capacity (ltr) 350 400





� Combination steel and polypropylene brush core for superior sweeping action

Brush Specifications

� The brush core has a diameter of 590mm and is made up from a combination of polypropylene and steel segments

� The steel segments provide an aggressive sweeping action to lift dried on material whilst the flexibility of the polypropylene provides a superior sweeping and lifting action

NOTE: Both models in the sweeper collector range require 40-60 l/min hydraulic oil flow

E.2 JCB MID RANGE ATTACHMENTS Issue 1

SC210 & SC240 SWEEPER RANGE

Sweeper Collector with water sprinkler system

SC210 SC240

Operating width (mm) 2100 2400Overall width (mm) 2410 2724Overall length without mounting bracket (mm) 2030 2040Overall height (mm) 810 840Operating weight without mounting frame (kg) 770 805Hopper Capacity (ltr) 250 300Water Tank Capacity (ltr) 320 370

Part Number Description Size (in) Size (mm) Note

980/90515 SC210 Sweeper Collector 82 2100 Mounting frame required980/90516 SC210 with integral water tank 82 2100 Mounting frame required980/90507 SC240 Sweeper Collector 94 2400 Mounting frame required980/90508 SC240 with integral water tank 94 2400 Mounting frame required

980/89011 Mounting frame - Compact tool carrier SC210 only980/89013 Mounting frame - Tool carrier980/89012 Mounting frame - 2CX MkII980/90417 Mounting frame - Backhoe980/90418 Mounting frame - Pallet forks980/90419 Mounting frame - Q fit980/90420 Mounting frame - Q fit & forks980/90736 Mounting frame - 406/407 combination SC210 only

980/89159 Gutter brush option Left hand 980/A3292 Gutter brush option Right hand

E

F.1JCB MID RANGE ATTACHMENTS Issue 1

EARTH DRILL - Drive Heads & Flights

Power Head - Hex Drive

� New Earthdrill form JCB Attachments, designed and built in house

� Three different models with drilling torques of 1500Nm, 3500Nm and 6000Nm are available

� Standard 2" hexagon drive withtwo mounting holes to accommodate various augers

� Supplied with hanger bracket, tail hoses and manual to suit the machine

Part Number Max. recommended flight (Std) Capacity (Nm) Machine

980/A4162 12”/305mm Auger 1500 Micro 8008*980/A4162 15”/380mm Auger 1500 Micro*, Micro Plus*980/A4162 15”/380mm Auger 1500 Mini CX980/A4162 18”/460mm Auger 1500 801, 8020X980/A4309 30”/760mm Auger 3500 802, 803, 804980/A4328 30”/760mm Auger 3500 8040, 8045980/A4321 30”/760mm Auger 3500 1CX980/A4327 36”/900mm Auger 6000 2CX980/A3596 36”/900mm Auger 6000 3CX, 4CX, 8052, 806980/A4324 36”/900mm Auger 6000 Robot 160, 170**980/A4326 36”/900mm Auger 6000 Robot 190, 1110***980/A5115 36”/900mm Auger 6000 Loadall Q/Fit

* 1.0m Flight length recommended, ** Mounting Frame 980/28400 Required*** Mounting Frame 980/68700 Required

Hex Drive - Flight Short (39”, 1000mm)

� Suitable for loose to medium dense, fine to coarse sands, medium to soft clays

� Wide choice of diameters enables accurate hole sizing and minimal reinstatement

� Short length option is ideally suited to machines with reduced lift over problems

� Replaceable wearparts available for prolonged service life

Part Number Size (in) Size (mm) Weight (kg) Duty Flight Length Teeth

980/A2020 6 160 15 Standard 39”, 1000mm 2980/A2022 9 230 28 Standard 39”, 1000mm 3980/A2024 12 300 38 Standard 39”, 1000mm 4980/A2026 15 380 45 Standard 39”, 1000mm 6

F

F.2 JCB MID RANGE ATTACHMENTS Issue 1


Hex Drive - Flight Standard (48”, 1200mm)


980/A2019 6 160 19 Standard 48”, 1200mm 2980/A2021 9 230 39 Standard 48”, 1200mm 3980/A2023 12 300 52 Standard 48”, 1200mm 4980/A2025 15 380 60 Standard 48”, 1200mm 5980/A2027 18 460 80 Standard 48”, 1200mm 6980/A2028 24 600 126 Standard 48”, 1200mm 8980/A2029 30 760 148 Standard 48”, 1200mm 9980/A2030 36 900 200 Standard 48”, 1200mm 11

Hex Drive - Heavy Duty (48”, 1200mm)

� Suitable for dense and medium dense coarse sands and sandy gravels: stiff to very stiff silts and clays


� Fully seam welded for more arduous tasks

� Replaceable tungsten wearparts available for prolonged service life


980/A2031 9 230 45 Heavy 48”, 1200mm 4980/A2032 12 300 58 Heavy 48”, 1200mm 4980/A2034 15 380 63 Heavy 48”, 1200mm 6980/A2035 18 460 92 Heavy 48”, 1200mm 6980/A2037 24 600 124 Heavy 48”, 1200mm 8980/A2038 30 762 141 Heavy 48”, 1200mm 10980/A2039 36 914 195 Heavy 48”, 1200mm 12

� Suitable for loose to medium dense, fine to coarse sands, medium to soft clays


� Replaceable wearparts available for prolonged service life

F

F.3JCB MID RANGE ATTACHMENTS Issue 1

Hex Drive - Rock Duty (48”, 1200mm)


980/A2040 12 300 49 Rock 48”, 1200mm 12980/A2042 18 460 91 Rock 48”, 1200mm 16


Flight Recommendation

Material Flight

Loose to medium dense fine to coarse sands, medium to soft clays Standard DutyDense & medium dense coarse sands & sandy gravels, stiff to very stiff silt & clays Heavy Duty

Very dense &/or cemented sands, coarse gravel & cobbles Rock Duty

Ancillaries


980/A2043 Extension Bar 39”/1000mm length332/A2056 Standard Inner Tooth332/A2055 Standard Outer Tooth332/A2059 Standard Pilot Bit332/A2058 Carbide Inner Tooth332/A2057 Carbide Outer Tooth332/A2060 Carbide Pilot Bit332/A2061 Rock Tooth

� Suitable for dense and medium densecoarse sands and sandy gravels: stiff to very stiff silts and clays


� Fully seam welded for more arduous tasks

� Replaceable tungsten wearparts available for prolonged service life

� Extension bar increases the depth that can be drilled by 1 metre

� Standard teeth are fitted on the Standard and Heavy duty flights as factory fit

� Carbide teeth/pilot bit can be retro fitted in place of the standard teeth for increased service life

F

G.1JCB MID RANGE ATTACHMENTS Issue 1

G

Part Number Description To fit

980/90453 HM165Q 1CX980/90253 HM165Q 802,8027ZT,8032ZT,980/90237 HM165Q 8025, 8030, 8035980/90355 HM165Q Robot160,170*980/A2706 HM165Q 8020980/90867 HM165Q Midi CX980/90256 HM165Q Universal

Notes: All HM165Q except the Universal hammers supplied ready to use with hoses, grease gun and cartridge, operators manual, moil and chisel

HM165Q Universal hammers do not include hanger brackets or hoses

*Requires frame 980/28400

HAMMERMASTER

HM165Q

� Durable solid body design provides optimum breaker protection


� Silenced as standard

� Supplied ready to use with hoses, moil and chisel

� Easy fitment onto JCB and non-JCB machines


Applications: Utility work, building, construction and groundcare

Carrier machines: 1CX, 8025, 8030, 8035, Robot 160, 170, 8020, Midi CX1.9 to 4.5 tonnes

Specifications: Ø 50mm tool306J impact energyBlow rate 540 to 1080bpmOperating weight 120kg

A

B C

D E

Model A B C D E

HM165Q 1190mm 330mm 270mm 140mm 200mm

G.2 JCB MID RANGE ATTACHMENTS Issue 1

GPart Number Description To fit

980/90241 HM265Q 2CX980/90242 HM265Q 8030, 8035980/90286 HM265Q 8040, 8045, 8055980/90243 HM265Q 8065980/90366 HM265Q Robot160,170, 190, 1110*980/90257 HM265Q Universal




HAMMERMASTER

HM265Q







Applications: Utility work, building and construction

Carrier machines: 8030, 8035, 8040, 8045, 8055, 8065, 2CX, Robot 160, 170, 190, 1110 2.8 to 6 tonnes


A

B C

D E

Model A B C D E

HM265Q 1200mm 400mm 400mm 180mm 180mm

G.3JCB MID RANGE ATTACHMENTS Issue 1

HAMMERMASTER

HM385Q







Applications: Utility work, building, construction and demolition

Carrier machines: 3CX, 4CX, JZ70, 8065, 8080, Robot 190, 11104.5 to 9 tonnes


B C

ED

A

Model A B C D E

HM385Q 1110mm 440mm 400mm 180mm 180mm


980/90238 HM385Q 8065, 8080980/90239 HM385Q 3CX, 4CX980/90367 HM385Q Robot 190,1110*980/90240 HM385Q JZ70980/90258 HM385Q Universal




G

G

G.4 JCB MID RANGE ATTACHMENTS Issue 1


980/90244 HM495Q 8080980/90245 HM495Q 3CX, 4CX,980/90246 HM495Q JZ70980/90259 HM495Q Universal



HAMMERMASTER

HM495Q







Applications: Utility work, building, construction and demolition

Carrier machines: 3CX, 4CX, JZ70, 8080.6 to 12 tonnes


B C

D E

A

Model A B C D E

HM495Q 1360mm 430mm 430mm 220mm 220mm

GH.1JCB MID RANGE ATTACHMENTS Issue 1

HAND HELD BREAKERS

T Pick and D Pick Breakers

15 kg T handle Pick 7⁄8" (22mm) 15 kg D handle Pick 7⁄8" (22mm)c/w latch retainer c/w screw retainer

15 kg D handle Pick 7⁄8" (22mm) c/w latch retainer

Application

Concrete, asphalt, or masonry breaking, ideal for trenching, tunnelling and lateralwork. Light demolition and construction applications.

The T and D pick breakers are small light weight hammers designed for light tomedium duty breaking. The breakers are available with either T handles for verticaloperation or with the popular D handle for horizontal work. A unique vibrationdamping system isolates the entire body shell which gives excellent protection to theoperator.

� Sealed hydraulic system resulting in low noise

� T type or D type handles available

� Supplied with tail hoses and quick connect couplings

� D handle pick is available with either screw or latch type tool retainer

� Durable heavy duty housing and handles

Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration levelsize range

929/30900+ 22 x 82 mm 15 - 22 lpm 50 - 65 bar 15 kg 1500 bpm 7.5 m/s2**7⁄8 x 31⁄4 in 3 - 5 gal 725 - 942 psi 33 lbs

T handle pick

Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration levelsize range

929/12900* 22 x 82 mm 15 - 22 lpm 50 - 65 bar 15kg 1500 bpm 6 m/s2**929/30800+ 7⁄8 x 31⁄4 in 3 - 5 gal/min 725 - 942 psi 33 lbs

D handle pick

* screw retainer+ latch retainer

** single axis to BS8622-5

H

H.2 JCB MID RANGE ATTACHMENTS Issue 1

HAND HELD BREAKERS

HM22 and HM 25 Breakers

HM22 HM2522 kg Breaker 7⁄8" (22 mm) 25 kg Breaker 11⁄4" (32 mm )Vibro damped Vibro damped

22 kg Breaker 1" (25 mm)Vibro damped

Application

Concrete, asphalt and rock breaking. Ideal for road repair and all round site work.

The HM22 and HM25 are supplied as standard with anti-vibration handles, givingthe breakers class leading low vibration levels.

The HM22 is a medium duty breaker for general demolition, concrete and asphalt breaking.

The HM25 is a popular breaker due to its powerful and versatile performance.When combined with the Beaver Powerpack it gives a highly efficient output within alight and compact package. Ideally suited for concrete, asphalt and rock breaking, agood general all round performing breaker.

� Robust cast steel construction

� Anti vibration handles give class leading low vibration levels


� Sealed system results in low noise, no exhaust port and elimination of freezing problems (with pneumatic)


Part Number Tool bit Flow range Pressure Weight Blow frequency Vibrationsize range level

929/92500 22 x 82 mm 18 - 22 lpm 69 - 86 bar 21 kg 1500 bpm 3.4m/s2*7⁄8 x 31⁄4 in 4 - 5gal/min 1000 - 1247 psi 46 lbs

929/92600 25 x 108 mm 18 - 22 lpm 69 - 86 bar 22 kg 1500bpm 3.4m/s2*1 x 41⁄4 in 4 - 5gal/min 1000 - 1247 psi 48 lbs

HM22

Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration size range level

929/92400 32 x 160 mm 18 - 22 lpm 90 - 110 bar 26 kg 1500bpm 4m/s2*11⁄4 x 61⁄4 in 4 - 5gal/min 1305 - 1595 psi 57 lbs

* single axis to BS8662-5

HM25

H

H.3JCB MID RANGE ATTACHMENTS Issue 1

HAND HELD BREAKERS

“NEW HM25LV Breaker

Application

Heavy duty breaking of concrete, asphalt and rock breaking combined withUltra Low Hand Arm Vibration levels. Ideal for road repair and all round site work

The HM25LV uses JCB patented technology to reduce Hand Arm

Vibration whilst increasing the power.

This breaker, when used with the Beaver powerpack gives the

ultimate in terms of performance and ultra low HAV levels.

� Ultra low vibration system reduces Hand Arm Vibration Levels

� Improved operator comfort and control from the immediate response trigger

� Compact design making it easier to use and transport

� Practical handle protection gives long service life

� Handles are supported by an active hydraulic suspension system


929/A2613 32 x 160 mm 18 - 22 lpm 90 - 110 bar 27 kg 1100 - 1300 bpm 1.6m/s2*11⁄4 x 61⁄4 in 4 - 5 gal/min 1305 - 1595 psi 60 lbs


H


HAND HELD BREAKERS

HM29 Breakers29 kg Breaker 1 1⁄4" (32 mm) 20 ltr vibro damped

29 kg Breaker 1 1⁄4" (32 mm) 30 ltr vibro damped

Application

Reinforced concrete breaking, heavy roadworks, asphalt breaking and generaldemolition work. High output applications.

The HM29 is available as either 20 or 30L flow breaker. Both are heavy dutybreakers designed to deliver the power and durability necessary for arduous andheavy duty hand held breaking.

The anti-vibration handles ensure comfortable operation, whilst the large diameterpiston delivers a strong powerful impact. For maximum impact energy the HM2930L gives the best performance

� Robust cast steel construction

� Anti vibration handles give class leading low vibration levels


� Sealed system results in low noise, no exhaust port and elimination of freezing problems (with pneumatic)



929/92700 32 x 160 mm 18 - 22 lpm 90 - 110 bar 29 kg 1450 bpm 5m/s2*11⁄4 x 61⁄4 in 4 - 5 gal/min 1305 - 1595 psi 64 lbs

HM29 20ltr


929/92900 32 x 160 mm 28 - 32 lpm 90 - 110 bar 29 kg 1500 bpm 5.9m/s2*11⁄4 x 61⁄4 in 6 - 7 gal/min 1305 - 1595 psi 64 lbs


HM29 30ltr

H


HAND HELD BREAKERS

Breaker steels 11⁄4” (HM25, HM29 & HM25LV) Part Number 995/32915 MoilPart Number 995/32916 ChiselPart Number 995/32922 Tarmac cutterPart Number 995/32927 Clay spadePart Number 995/32928 Rammer pad stemPart Number 995/32914 Rammer pad

Breaker steels 1” (HM22) Part Number PP/7310 MoilPart Number PP/7311 ChiselPart Number PP/7315 Tarmac cutterPart Number PP/7316 Clay spadePart Number PP/7313 Rammer pad stemPart Number PP/7314 Rammer pad

Breaker steels 7⁄8” (HM22, D & T Pick) Part Number PP/1357 MoilPart Number PP/1358 ChiselPart Number PP/7321 Tarmac cutterPart Number PP/1360 Clay spadePart Number PP/7320 Rammer pad stemPart Number PP/7314 Rammer pad

Breaker steels

H

HAND HELD TOOLS

Disc CutterApplicationAn ideal cutter for many worksites and most applications, wellbalanced and quite unit, it cutsmost materials including metals,concrete and stone.

Supplied complete with tail hosesand two cutting discs.

Part Number Disc cutter dia Disc centre hole dia Max cutting depth RPM

5024 300 mm 22 mm 102 mm 6000 @ 12 in 7⁄8 in 4 in 20 lpm

Pressure range Flow range Height x width x length Weight Vibration

106 - 176 bar 18 - 21 lpm 320 x 260 x 650 mm 10kg 3.37 m/s2

1500 - 2500 psi 4 - 4.6 gal/min 13 x 10 x 26 in 22 lbs

� Flow regulator to prevent over-speeding

� Adjustable safety guard

� No carburettor to clog with dust

� Accepts diamond blades

� Removable handle for right or left handed operation

4” Submersible Trash PumpApplicationRugged durable submersible pumpused for pumping water withmud, leaves, twigs, sand, sewageand sludge in it.

Used to handle matter that wouldclog most other pumps.

Supplied without hoses.

Part Number Weight Discharge port Max discharge Max head Max operating Height x width pressure

929/34300 32 kg 100 mm 2160 lpm 10.5 m 138 bar 511 x 480 mm(20ltr) 70 lbs 4 in 34 ft 2000 psi 20 x 31 in

929/34330 32 kg 100 mm 2640 lpm 15 m 138 bar 511 x 480mm(30ltr) 70 lbs 4 in 50 ft 2000 psi 20 x 31 in

929/34340 32 kg 100 mm 2880 lpm 17.12 138 bar 511 x 480mm(40ltr) 70 lbs 4 in 56 ft 2000 psi 20 x 31 in

� Greater lift height than suction pumps

� Self priming and run dry

� Unique combi seal - protects main pump seal

� 5000hrs seal bearings - minimal maintenance required

� Removable wear plate - protects pump housing

Hose options929/34317 10m (4") BSP screw on lay flat hose980/90632 10m Cam-loc lay flat hose (650/10301 required)650/10301 Screw-on Cam-loc fitting for use with Cam-loc


H

HAND HELD TOOLS

Hydraulic DrillApplicationDelivers safe, steady power for allgeneral drilling applications.

Part Number Hole capacity (steel) Hole capacity (wood) Chuck RPM

5117 13 mm 27 mm 13 mm key 1000 @ 1⁄2 in 11⁄16 in 1⁄2 in 20 lpm

Operating pressure Flow range Height x width x length Weight

70 - 141 bar 15 - 30 lpm 229 x 76 x 190 mm 2.7 kg1000 - 2000 psi 4.2 - 5.5 gal/min 9 x 3 x 71⁄2 in 6 lbs

� Reversible drive - enables powering out of material

� Lightweight and compact for easy use

� Rugged gear motor for strength

� Heat insulated handle for safety

Impact DrillApplicationIdeal for hammer drilling inconcrete, brick, rock and otherdifficult to drill materials.

Part Number Hole capacity Hole capacity Hole capacity Chuck RPMsteel wood concrete

5118 13 mm 38 mm 19 mm SDS chuck bit shanks 805 @ 1⁄2 in 11⁄2 in 3⁄4 in 20 lpm

Operating pressure Flow range Height x width x length Weight

70 - 141bar 19 - 25 lpm 248 x 89 x 305 3.91000 - 2000 psi 4.2 - 5.5 gal/min 93⁄4 x 31⁄2 x 12 in 8.5 lbs

� Reversible drive - enables powering out of material

� Lightweight and compact for easy use

� Rugged gear motor for strength

� Heat insulated handle for safety


H


HAND HELD TOOLS

2” Submersible PumpApplicationHigh output pump with highdelivery head ideal for pumpingclear water.

ApplicationTwo man drill capable of drilling holes up to 12indiameter, portable and manoeuvreable as wellas quiet in operation.

Part Number Weight Discharge port Max discharge Max Max operating Height x head pressure width

929/03900 (20ltr) 8.3 kg 50 mm 700 lpm 18 m 100 bar 205 x 230 mm18.3 lbs 2 in 154 gal/min 60 ft 1450 psi 8 x 9 in

929/04500 (30ltr) 8.5 kg 50 mm 800 lpm 18 m 100 bar 511 x 782 mm18.7 lbs 2 in 176 gal/min 60 ft 1450 psi 8 x 9 in

Weight Capacity Hole depth Torque RPM Max pressure Height pressure

15 kg 305 mm 1220 mm 295 Nm 136@20 lpm 138 bar 1295 mm34 lbs 12 in 48 in 217 lb/ft 2000 psi 51 in

� Supplied complete with 10m lay flat hose

� Self priming for speed of use

� Run dry without damaging the pump

� Lifting lug - enables safe easy placement

� Automatic return to neutral - safety device

� Reversible - for powering out of ground

� Hydraulic drive - more torque than most petrol units

Hand held earthdrillPart Number 929/134004” Auger 1.2m length Part Number 929/134076” Auger 1.2m length Part Number 929/134088” Auger 1.2m length Part Number 929/1340910” Auger 1.2m length Part Number 929/1341012” Auger 1.2m length Part Number 929/13411Auger flight tooth Part Number 929/13412100mm Tip Part Number 929/13413150 - 300mm Auger extension Part Number 929/1341424” Extension Part Number 929/13428

Hand held Earthdrill

H


HAND HELD TOOLS

Diamond Core Drill

Optional items

Core Drill mini drill standPart Number 929/13280

Bit Centering devicePart Number 929/13271

11⁄4” - 1⁄2” adaptors (core drill)Part Number 929/13270

Hand Operated Water PumpPart Number 929/13250

Breast PlatePart Number 929/13261

929/13251 127mm dia x 450mm Long Core Bit





929/92130 Core Bit Extension 100mm

929/92132 Core Bit Extension 300mm

ApplicationDesigned to provide a unrivalledcombination of power, flexibilityand reliability for diamond coredrilling, capable of drilling holesup to 4" diameter.

Part Number RPM Bit size Weight Length Width Flow range Operating pressure

929/13200 600 70 - 125 mm 7 kg 410 mm 100 mm 15 - 25 lpm 100 bar15.4 lbs 16 in 4 in 3.3 - 5.5 gal/min 1450 psi

929/13300 2400 15 - 25 mm 7 410 100 15 - 25 lpm 100 bar15.4 lbs 16 in 4 in 3.3 - 5.5 gal/min 1450 psi

� Side handle for easy of use

� Rugged hydraulic motor - allows prolonged use

� Achieves clean cut on both sides of hole

� Water hose port for dust suppression

H

JCB AttachmentsWorld Parts Centre, Waterloo Park

Beamhurst, Uttoxeter, Staffordshire, England ST14 5PAHotline: +44 (0) 1889 506047

Fax: +44 (0) 1889 506046email: [email protected]

www.jcb.com

jcb attachments for midrange machines20tartoz... · 2011. 11. 20. · sunflowers 400 talc 880...

Documents