jbc-702 cat
TRANSCRIPT
1
GOLDSOL CO.,LTD
Protection Relay Tester Model no. JBC-702
Main Characteristics 1. It satisfies all requirements of field test. Model 702 tester can simultaneously output standard six-phase current and six-phase voltage with 30A/phase current and 125V/phase voltage. Connecting six phase current in parallel can acquire 180A current. The tester can not only test traditional relays and protective devices, but also test modern microcomputer-based protective devices, especially the differential protection of transformers and automatic switching devices of stand-by power supply. Testing becomes more convenient and perfect. 2. All technical parameters meet the criteria DL/T624-1997 Technical Specifications of Test Equipment Based on Micro-computer for Relaying Protection issued by the Ministry of Electric Power Industry. 3. The host machine, which has embedded high performance IPC (industrial personal computer), can run independently with its 300—600MHz main frequency, 128M memory, 6—12G hard disk and Windows XP operating system. 4. It was the first one in the industry to apply imported stainless steel panel, stainless steel keypad, touch-pad mouse, which overcomes such defects of trackball mouse as difficulty in operating and prone to damage. The TFT true color display is employed with a size of 8.4 inch and its resolution being 800×600. Consequently, the overall operation of the host machine becomes convenient and durable. 5. The main control board is of DSP+FPGA structure, outputting 16 bit DAC, which may generate 2000 points high density sine wave per week to fundamental wave, greatly ameliorate the quality of waveform and improve the accuracy of tester. 6. The power amplifier is hi-fi linear type, which can both guarantee the precision of low current and the stability of heavy current. 7. The device can directly access to PC machine through USB interface, needless of any patch cord.8. The device can run by access to notebook computer, which is installed with a same software, needless to relearn how to operate. 9. The device has GPS synchronous testing function with embedded synchronization card (matching), which accesses to PC machine through RS232 interface, so the synchronous testing by exchanging two testers in different places can be achieved. 10. The tester is equipped with independent special DC with auxiliary voltage source output, whose output voltages are 110V (1A), 220V (0.6A), for the purpose of meeting the power need of DC relay or protective devices. 11. The tester has the function of auto-regulation by software, avoiding the calibration accuracy by
2
opening cabinet to regulate potentiometer, so the stability of accuracy is greatly improved. Parameters:
Item 702 (6U 6I) 702 (4U 3I)
AC-DC Voltage Source
Max Voltage AC 6 x 125V DC6 x 150V AC 4 x 125V DC 4 x 150V
Maximum Power AC 6 x 75VA DC6 x 100VA AC 4 x 75VA DC 4 x 100VA
Resolution 1mV 1mV
Accuracy 0.1%-0.2% 0.1%-0.2%
Frequency Range:0-1000HZ Accuracy:0.001HZ
Range:0-1000HZ Accuracy:0.001HZ
Phase Accuracy:0.1 Degree Accuracy:0.1 Degree
Harmonic Distortion
≤0.1% ≤0.1%
Other Amplitude 、 Frequency 、 Phase, separation of independent by phase, short circuit、over loading、distortion、Distortion Protection, 4th Rd voltage can be set to zero-sequence voltage or arbitrary set
Amplitude、 Frequency、Phase, separation of independent by phase, short circuit、over loading、distortion、Distortion Protection, 4th Rd voltage can be set to zero-sequence voltage or arbitrary set
AC-DC Current Source
Max Current AC 6 x 30A DC 6 x 20A AC 3 x 40A DC 3 x 20A
Maximum Power AC 6 x 300VA DC 6 x 200VA AC 3 x 300VA DC 3 x 200VA
Resolution 1mA 1mA
Accuracy 0.1%-0.2% Ultra-high-precision low current
0.1%-0.2% Ultra-high-precision low current
Frequency Range:0-1000HZ Accuracy:0.001HZ
Range:0-1000HZ Accuracy:0.001HZ
Phase Accuracy:0.1 Degree Accuracy:0.1 Degree
Harmonic Distortion
≤0.1% ≤0.1%
Other Amplitude, frequency, phase, separation of independent by phase, short circuit、over loading、distortion、Distortion Protection
Amplitude, frequency, phase, separation of independent by phase, short circuit、over loading、distortion、Distortion Protection
Auxiliary DC voltage source
Output Voltage DC110V/220V DC110V/220V
Maximum Power 100W 100W
The Number Of Channel
8 8
Input Mode Null Input,DC5-250V,0.5A Null Input,DC5-250V,0.5A
Other Dithered time can be set Dithered time can be set
The Number Of Channel
4 4
Output Mode DC 0-250V,0.5A DC 0-250V,0.5A
Time Measurement Range:0.001-9.999.999S Accuracy:0.001S
Range : 0.001-9.999.999S Accuracy:0.001S
3
JBC-702 (6U 6I) JBC-702 (4U 3I)
Harmonic 2-20 times superposition harmonic of voltage and current wave can be set arbitrarily at the same time.
2-20 times superposition harmonic of voltage and current wave can be set arbitrarily at the same time.
Size 470mm x 405mm x 185mm 450mm x 400mm x 185mm
Weight 20 Kgs 16 kgs
Power AC220V ± 10%50HZ ± 10%10A AC220V ± 10%50HZ ± 10%10A
Disributer in Thailand Sesco Electric Co.,Ltd www.sescothailand.com