jacks & couplers - nuera - first for a reason · 2013-04-10 · jacks & couplers mounting...

85

Jacks & CouplersJacks & Couplers

MOUNTING PLATES

Part # Description Mfg. #

18-292 Atwood Weld-On Mounting Bracket 87501

18-445 Swivel Jack Snap RIng 015904


18-291 Atwood Bolt-On Mounting Bracket 81412

Note: May also work with other side mount jacks (i.e. 18-440 on page #59 )

Used with Atwood Jack #’s 18-295 & 18-298 (see previous section)

Used with Atwood Jack #’s 18-295 & 18-298 (see previous section)

ATWOOD STABILIZER JACKS


18-281 Atwood Stabilizer Jack (17.75” Extended) 82301

18-281-1 Atwood Stabilizer Jack (21.75” Extended) 82297

18-281-JR Jack Rod for Atwood Stabilizer Jack 80480

18-281-P Jack Foot for Atwood Stabilizer Jack

18-82300 Atwood Stabilizer Jack (retracted height 11”) QT 82300


18-282 Scissor Jack, 5K (24” Extended) 5740-24

18-282-H Handle for Scissor Jack 5740H-24

18-TJ01 Domar Stabillizer Jack

- Lifts 650 lbs. / Holds 1000 lbs.

- Retracted - 11.5”

- Swing away storage

- Jack Rod Not Included

Jacks &

Couple

rs


18-430 Weld-on Gear Box Only 018161

Welds to side and bottom of tongue. For use with rack and wheel 18-403 (see page # 84)


18-298 Atwood Side Crank, Swivel Jack w/Wheel (500lbs) (Refer to Appendix) 87535

18-295 Atwood Top Crank, Swivel Jack w/Wheel (500lbs) (Refer to Appendix) 80043

Atwood Bolt Swivel Jacks are designed to allow the jack tube to swing easily from its hori-

zontal transit position to the vertical stationery position, locking securely into place with a solid ½"

diameter spring-loaded pin. The bolt design of the swivel firmly holds the jack against the mounting

bracket, substantially reducing the side-to-side wobble and virtually eliminating the annoying chatter

during travel.

Requires either mounting bracket 18-292 or 18-291 (see next section)

SIDE MOUNT JACKS

Picture not available.

86



18-280 Deluxe Power Jack - 2500 lbs capacity (Refer to Appendix) 80515

18-279 Heavy Duty Power Jack - 3500 lbs capacity 80530

18-275 Heavy Duty Power Jack - 2,500 lbs capacity, 14.24” Travel (Ext. 10” min)


19-906 Bulldog 7K Side Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 190754

19-906-I 7K RAM Side Wind Square Jack w/ Drop Foot TJD-7000S19-907 Bulldog 7K Top Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 190704

19-907-B Buyers 7K Top Wind Jack w/Drop Foot - 15” Drop 0091310

19-907-I 7K RAM Top Wind Square Jack w/Drop Foot TJD-700019-900 Bulldog 8K Side Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 190510

19-900-S 8K Shelby Side Wind Drop Leg Jack 6108SW-2419-901 Bulldog 8K Top Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 190500

19-901-S 8K Shelby Top Wind Drop Leg Jack 6108TW-2419-906-B Buyers 7K Side Wind Jack w/ Drop Foot - 15” Drop 0091340

Replacement Parts19-915 Side Wind Handle Kit Only 500171

19-916 Top Wind Handle Kit Only 500148

19-917 Inner Leg Only 700510

19-918 Side WInd Replacement Gear Kit 500156

19-919 Top WInd Replacement Gear Kit 500224

19-921 9/16” Replacement Pin Only 700263

Features

The Deluxe Power Jack eliminates the need for hand cranking to position a trailer. Tt fits most 2

5/16” couplers and has a lifting capacity of 2,500 lbs. It also includes a courtesy light to ease hooking

a unhooking in the dark, and a manual override with handle that is accessible without

removing the cover.

Features

Heavy gauge 2.5" square tubing for direct weld mounting

Zinc plated inner tube and drop leg ~ Zero water retention base

Use the painted outer tube as the final finish or primer

Oil impregnated bushing for improved bearing and gear life

POWER JACK

DROP LEG SPEED JACK


19-920 12K - 35K Side Wind Drop Leg Speed Jack SJ-1000

DROP LEG JACK

Jacks &

Couple

rs

87


DROP LEG JACK


19-908 10K Side Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix 180455

19-909 10K Top Wind Jack w/Drop Foot - 15” Drop (Refer to Appendix) 180354

BULLDOG’S 10,000 lbs. support capacity square jack “fills the gap” between 8,000 lbs. and

12,000 lbs. current square jack product offerings. Heavy gauge 3" square tubing allows for direct

weld mounting wherever the application allows. Zinc plated inner tube and drop leg. Heavy duty

base, with reinforcement ribs. Precision manufactured for long term reliability and smooth, easy

cranking. Lift Capacity: 7,200 lbs. Static Load: 10,000 lbs.


19-910 Drop Leg Jack with Handle, Standard (12K)19-912 Drop Leg Jack Only, Standard (12K) (Refer to Appendix) 182400

19-912-1 Drop Leg Jack Only, Spring Loaded (12K) 190800

19-601 Crank Hanger Only XB-LG008519-602 Handle Only 15181

19-912-15 Side Pin Drop Leg Jack, Spring Loaded 182800

19-912-H Replacement Handle for 19-910

19-912-3 Jack Only

Features

4" square tubing, 7 gauge superior alloy steel. Painted outer tube, inner tube, and drop leg

Drop leg option with 5 positioning holes. Spring return drop leg or non-spring return drop leg.

12.5" screw travel, 13.5" of additional adjustment with drop leg. Front facing drop leg plunger pin.

Lift Capacity: 10,000lbs. Static Load: 12,000 lbs.


19-912-E 12K Eclipse/Bulldog Engineered Jack, Non-Spring Return 140098037619-912-1E 12K Eclipse/Bulldog Engineered Jack, Spring Return Front Pin 1400950376

The electric motor kit works on 2-speed jacks with small planetary gear box. It also works on

Bulldog single speed jacks.


19-912-M Add-on Electric Motor Kit 1824200100

Jacks &

Couple

rs

88


DROP LEG JACKS


19-550 Drop Leg Jack Only, Standard T12FP

19-551 Drop Leg Jack Only, Standard - NO PAINT T12FP-NP

19-551-2 Drop Leg Jack with H&H, Standard

19-555 Drop Leg Jack Only, Spring Loaded T12FPSL

19-555-2 Drop Leg Jack with HDL & HGR, Spring Loaded

19-555-SP-1 Drop Leg Jack Side-Pin

19-556 Drop Leg Jack Only, Spring Loaded - NO PAINT T12FPSL-NP

19-556-1 Drop Leg Jack with HDL, Spring Loaded

19-557 TEM Handle Only - w/Nipple HWN-7P

19-558 TEM Handle Only - Standard HWON-7P

19-560 TEM Handle Hanger Only CK04300

TEM jacks are designed with 1.5 to 1 gear ratio, welded bans on drop leg to prevent jack

lean and drop-leg from falling out, and a thick sand plate to give added load bearing stability. 27”

retracted, 12” of extension (12” additional foot extension).

Lift Capacity: 12,000 lbs. Static Load: 15,000 lbs.


19-570 Jack w/ Handle, Spring Loaded, (12K) TJD10000SP-F19-571 Jack w/ Handle, Standard, (12K) TJD10000-F


19-926 12K 2-Speed Planetary Drop Leg Jack - Standard (small gear box) 183416

19-926-1 12K 2-Speed Planetary Drop Leg Jack - Spring Loaded (small gear box) 183816

19-925 12K 2-Speed Traditional Drop Leg Jack - Standard 183901

19-925-1 12K 2-Speed Traditional Drop Leg Jack - Spring Loaded 183903

BULLDOG’s 2-speed, 12,000 lbs. support capacity square jack makes cranking easier when

fully loaded and faster when unloaded. In low gear, the ratio delivers full lifting power at a super-

smooth, easy-lifting 27.7 turns per 1” of travel. In high gear, the cranking ratio is a speedy 9 turns

per 1” of travel, the fastest in its weight class. This unit can be either used as a single jack unit or

mated with a 1-speed (slave) Bulldog jack for the added stability of a tandem jack system.

DROP LEG JACKS


19-927 Special Handle for 2-Speed Bulldog Jack - Removable 701466

Jacks &

Couple

rs

89



19-600 Drop Leg Jack with HDL, Standard


19-600-2 Drop Leg Jack with HDL, Standard


19-603 Drop Leg Jack Only, Standard (10K) LG8700-31

19-603-1 Drop Leg Jack Only, Spring Loaded (10K) LG8700-313072

19-601 Crank Hanger Only XB-LG0085

19-602 Handle Only LG0083-01

19-605-1 Drop Leg Jack with HDL & HGR, Spring Loaded

19-605-2 Drop Leg Jack with HDL & HGR, Standard

19-605-4 Drop Leg Jack No Paint, Spring Loaded

19-607 Miter Gear - w/Hub LG1495-01

19-607-1 Thrust Bearing PP0013-07

19-606 Miter Gear - No Hub LG1494-01

19-190758 Drop Leg Jack Sidewind – Swivel Mount (15” Travel) (8K) 190758

19-912 Drop Leg JackNon-Spring Return Sidewind (12.5” Travel) (12K) 182415

19-912-1 Drop Leg JackSpring Return Sidewind (12.5” Travel) (12K) 182815

19-650-1 Drop Leg JackDual Pin Spring Loaded (12” Travel) (12.5K - 20K Static) LGD700-213


Travel: 13.5" / Drop: 12" / Total Travel: 25.5"

Retracted: 24.375" / Extended: 49.875"

DROP LEG JACKS


19-650 Dual Pin Drop Leg Jack Only, Standard (12.5K)(Refer to Appendix) LGD700-212072

19-650-1 Dual Pin Drop Leg Jack Only, Spring Loaded (12.5K) LGD700-213072

19-651-1 Dual Pin Drop Leg Jack with HDL, Spring Loaded


19-606 Miter Gear - No Hub LG1494-01


Travel: 12" / Drop: 14" / Total Travel: 26"



19-641 Heavy Duty 2-Speed Drop Leg Jack Only LG4700-324

19-641-1 Heavy Duty 2-Speed Drop Leg Jack with HDL & HGR

19-642 Heavy Duty 1-Speed Drop Leg Jack Only LG4700-314

19-LGC001-71 LGC Model Heavy Duty 1-Speed Drop Leg Jack Only LGC001-71

19-LGC001-72 LGC Model Heavy Duty 2-Speed Drop Leg Jack Only LGC001-72


19-810-3 Cross Bar Only LG0094-6825

19-640 Complete Jack Set

19-LGC001-SET LGC Model Complete Jack Set

Includes:

(1) 19-641 Jack, (1) 19-642 Jack, (1) 19-602 Handle, & (1) 19-810-3 Cross Bar

19-LG4700-30 Slave and 2-Speed with Cross Shaft LG4700-30

19-LG4700-31 Slave Only with Handle LG4700-31

19-LG4700-32 2-Speed Only with Handl LG4700-32

LG400C70000078 Slave and 2-Speed with Cross Shaft – 10” Round Foot LG400C70000078LG4001700000078 Slave and 2-Speed with Cross Shaft – 10”X10” Square Foot LG400170000007819-LGS-5A105 Mark V Slave and 2-Speed with Cross Shaft LGS-5A105

19-643 Mark V LGS-3A115


Travel: 13.5" / Drop: 12" / Total Travel: 25.5"


Jacks &

Couple

rs

90



19-554 Drop Leg Jack, Top Crank TC-10

19-554-1 Drop Leg Jack, Top Crank (New Style Crank) TFG/NTC10

Features

Heavy duty roller bearings

Bronze bushings on shaft and screw

Lockout pull pin for easy dropfoot retraction

5 position dropfoot

Collapsed: 27” / Extended: 47” / Total Travel: 20”

Lift Capacity: 10,000 lbs. Static Load: 15,000 lbs.


19-912-TW Top Crank Drop-Leg Jack (Non-Spring Loaded. Includes Handle.) 182304

(Refer to Appendix) 19-911 Replacement Handle 800075

A BULLDOG topwind jack is an excellent choice for trailers that lack room for a side-

mounted crank.

Lift Capacity: 10,000 lbs. Static Load: 12,000 lbs

DROP LEG JACK ACCESSORIES


19-557 TEM Jack Handle (with nipple) HWN-7

19-558 TEM Jack Handle (without nipple) HWON-7

19-602 Binkley Jack Handle

19-601 Jack Handle Hanger

19-810-3 Cross Bar - 65” Length (used with tandem jack set-up)

TOP WIND DROP LEG JACK

Jacks &

Couple

rs


19-830 Atwood DuraLeg Electric Power Jack, Single, with Switch 66038

19-830-1 Atwood DuraLeg Electric Power Jack, Single, with Controls 66369

19-830-2 Atwood DuraLeg Electric Power Jack, Double, with Controls 66370

Designed for use with gooseneck trailers. 10,000 lift capacity. Extend and lift time is a little

over a minute (about 70 seconds) while retract time is a little less than a minute (about 57 seconds).

Two (2) year limited warranty. The electro-mechanical design has been time-tested for reliability.

The inner leg can extend up to 22”.

DROP LEG JACKS


19-812 Crank Extension Pipe (1 1/4” x 42”) P-8900

19-813 Crank Extension Sleeve (1 1/2” x 2”) P-7100

91


Jacks &

Couple

rs

Part # Description For Jack # Mfg. #

94-90-269 Cap 18-299, 18-263, 98-90-098, 18-262

18-262-B Plate 98-90-098, 18-262

05-18-002 Handle 18-264

18-299-H Handle 18-299, 18-263

05-18-003 Handle 98-90-098, 18-262

000-18-019 Gear 18-299, 18-263

000-18-018 Gear 98-90-098, 18-262

18-299-A Bearing 18-299, 18-263

18-299-PP Lock 18-264, 18-299, 18-263

18-262-PP Lock 98-90-098, 18-262

18-299-W Wheel 18-264, 18-299, 18-263

05-18-007 Wheel 98-90-098

98-90-098-W Wheel 18-262

18-299-B Fixation Pieces 18-264, 18-299, 18-263, 98-90-098, 18-262

18-445 Retention Spring 18-264, 18-299

JACK REPLACEMENT PARTS


N/A Cap 18-303-1, 18-459, 18-326, 18-440-5, 18-450-5

18-441-1 Handle 18-303-1, 18-459, 18-326

05-18-002 Handle 18-440-5, 18-450-5

20-622 Mounting Bracket 18-440-5, 18-450-5

19-921-C Pin & Chain - 18-440-5, 18-450-5


94-90-269 Cap 18-303-15, 18-448, 18-448-1, 18-448-8

18-451 Handle 18-303-15, 18-448

19-914 Handle 18-448-1, 18-448-8

19-918-1 Gear 18-303-15, 18-448, 18-448-1, 18-448-8

20-622 Mounting Bracket 18-448-8

19-921-C Pin & Chain 18-448-8


99-18-007 Cap 20-685

99-1912-G Gear 20-685

N/A Support N/A

N/A Bearing N/A

N/A Shaft N/A

19-912-H Handle 20-685


05-19-001 Cap 19-906

19-942 Gear 19-906

19-914 Handle 18-448-1, 18-448-8

N/A Support N/A

05-18-006 Bearing 000-18-002

19-921 Pin 19-906, 19-907

05-18-008 Foot 19-906, 19-907

05-18-02 Handle 000-18-002

19-915 Handle 19-906

19-916 Handle 19-907

jacks & couplers - nuera - first for a reason · 2013-04-10 · jacks & couplers mounting...

Documents