Item Name: Vertical Tensile Testing Machine

Item No: TW-320

This equipment apply to testing of extend ,adhesive, peel off, tearing of a variety material

such as Rubber. Plastic. Leather, Metal, Nylon string, Fabric, Paper, Aviation, Packing，

Construction, Petrochemical, Electronics, Vehicle…. So that it as a essential test equipment on

Quality management, Incoming control. Physical testing. Dynamical researching, Material

development.

Capacity options：200 pound

Units Switch : kg,f、N 、LBf

Analyse ：1/25000

Precision ：±1%

Maximum ( not including clamp) :600mm

Testing Speed：50-500mm/min

Available width :Unlimited

Weight: 50 kg

Power: 1∮,AC200V, 3A

Display : LCD

Including printer

Item No. TW-319

Item name :Mircrocomputer Tensile Testing Machine

Description :To determine diverse of material of tension,

tearing,

Peel off and etc…. (including screen)

capacity options：100, 200, 500 N; 1, 2, 5 kN

Unit (switchable)：kgf , gf, Ton, lbf, N, kN

Tensile Tester is applicable in the universal tensile tests of plastic films, laminated films, flexible packaging materials, adhesives, adhesive tapes, pressure sensitive tape, rubber, paper, aluminum-plastic boards and so on. Tensile Tester can do the test of tensile, tensile resistance and elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel. Universal Tensile Tester conforms to standards of ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, and ASTM F904, ISO 37, JIS P8113.

Item Name :Index Push & Pull Guage (Japan)

Item No:TW-318

With simple operation, precision, peak value maintance, indicate two scales

Application: electroics，components of Vehicle,Lighter & portfire ,

construction, fabric

, Petrochemical,mechanism, pen and IT line test etc…..

Item Name: Digital Push & Pull tester

Item No. TW-317

digital push & pull small multi-function, high-precision load tests of

push-pull machines. Apply to a variety of products push load tests,

strength tests Slide, damage test. Figures show high resolution,

easy to use and efficient for the new generation of push force

testing device.

Accuracy of 0.5, minimum reading up 0.001N; Testing process is

to maintain peak function. N, Kgf, Lbf three units, and automatic

switching. Environmental protection and energy saving design of the machine, 10-minute

operation automatically without electricity shutdown. Can be installed on various pilot plant

and test fixture as a dedicated machine

Item Name: Dual Arm Tensile Testing Machine

Item No.: TW-316

Apply to metal , plastic , paper , color printing package,

stickness tape, case, fabric, foodstuff, cable , electronics

test and etc……, can test the physics capability of

various material, finished products,semi-manufactured goods.

using different clamp can do resistant pull test, resistant press test ,

bending test , tearing test etc……

Item Name: Desktop Tensile Tester

Item No.: TW-315

Application: rubber /plastic tension test, plastic bending test,

cable and wire tension test, high elastical material tension

test, fabric broken test, shoe material tension & tearing test.

capacity :200 pound

Units switchable: kgf, N, Ibf

Load analyse:1/25000

Precision: ±1%

The most range :600mm

testing speed: adjustable

Motor: AC conversion motor

weight: 50kg

Power: 1∮,AC200V, 3A

Including printer

Item Name: Manual Vertical Machine Frame (volution)

Item No. :TW-314

manua operationl vertical machine frame is used for push & pull strength tester prepare.

Suitable for torn testing, press tension testing etc……

dimension：L×W×H(mm) 160×240×460

rating load：500N

range：150mm

manual operation，T sharp volution

item Name:Manual Vertical Machine Frame（manual press）

Item No.: Tw-314

manua operationl vertical machine frame is used

for push & pull strength tester prepare. Suitable

for torn testing, press tension testing etc……

Dimension: L×W×H(mm) 240×150×

Item Name : Horizontal Manual Test Stand

Item No.: TW-313

Horizontal manual test stand

is used for prepare of push & pull strength tester series,

can be assembled to different test machine. Suitable for

torn testing, push & pull testing. With horizontal installtion,

simple operation, can be installed on the table, steady.

Item Name:Computer Servo Tensile Testing Machine

Item No: TW-312

This equipment apply to testing the extend ,adhesive,

peel off, tearing of a variety material such as Rubber.

Plastic. Leather, Metal, Nylon string, Fabric,

Paper, Aviation, Packing，Construction,

Petrochemical, Electronics, Vehicle….

Testing the physics capability of various materials,

finished products, semi-manufactured goos. With different clamps, can be used for resistant

pull testing, bending testing,tearing testing, shearing force testing

Standards:GB、ISO、ASTM、BS、DIN、JIS

Capacity options ：100, 200, 500 N; 1, 2, 5 kN

units switch：kgf, lbf , N , kN, kPa, MPa

load analyes：1/200,000

load precision：±0.25%

Max. range (not include clamp)：1000mm

efficiency width：410mm

Testing speed ：0.0001~1000 mm/min or specified by user

data sampling frequency：200 tims/second

Motor：AC

sevro motor dimension ：(W×D×H) 75×70×225 cm

computer & desk dimension：(W

×D×H) 100×60×118 cm

weight：152kg

Power：1∮,220V,15A(or specified by user)

Item Name: Universal Dual Arm Tensile Test Machine

Item No.: TW-311

Particularly applicable to the strong textile testing,

low-cost, high-performance. The accuracy of

Crosshead movement shows that the first

reading can be accurate to 0.001 mm, the first

Crosshead location can be absolutely accurate

to 0.001 mm.. Precision ball screws and guidance

systems, high-precision closed-loop speed controller,

Postponed optional devices and rapid return, RS232 computer interface, will be contained

and itinerary protection restrictions, immediate load and tensile test cycle, the long-term

creep testing.

Digital control sample damage detection, automatically without mechanical tension to return

to the state test location, automatically detect calibration, impact protection, optional

automatic reduction, automatic back to zero.

Suitable for testing the resistant bend, resistant pull, resistant fold , can be specified by user.

Item Name: Universal Singel Arm Tensile Testing Machine

Item No: TW-310

Particularly applicable to the strong textile

testing, low-cost, high-performance. The accuracy of

crosshead movement shows that the first reading

can be accurate to 0.001 mm, the first

crosshead location can be absolutely

accurate to 0.001 mm.. Precision ball

screws and guidance systems, high-precision

closed-loop speed controller, Postponed optional devices and rapid return, RS232 computer

interface, will be contained and itinerary protection restrictions, immediate load and tensile

test cycle, the long-term creep testing.

Digital control sample damage detection, automatically without mechanical tension to return

to the state test location, automatically detect calibration, impact protection, optional

automatic reduction, automatic back to zero.

Specifications:

Rang （not including the length of clamp）：1100mm L：460mm W：440mm H：1590mm work

section：100mmMa： Max load:300 kg speed range 0.001-500mm/min；Reture speed ：

500mm/min；weight：60kg。

Item Name: Low-Temperature Freezer Cabinet series

Item No. TW-309

Apply to storage testing of toy, plastic,

electronics at the low temperature

Precision temperature control:

cabinet temp. -30~0℃,can be specifed by user.

With digital temperature indicator, the running

status can be know at any time.

Security control system: If starting time delay,

the engine will be off gap to protect.

Humanity design: with security doorlock, prevents to open

at will; with anticorrosion stair type the gallbladder, suit for the disposition of optional rack.

Item Name: Oven Series

Item No. TW-308 (TX-016)

1 Interior uses the mirror surface stainless steel arc argon to weld the manufacture but to become, exterior uses the high quality steel plate, the molding is artistic. 2 uses has controls the warm protection, the digital demonstration microcomputer temperature controller, has fixed time the function, controls warm precise is reliable. 3 the hot blast circulatory system by can the continuous working air blower and the appropriate air flue is composed under the high temperature. The work indoor temperature is even. 4 fixed time scope: 1-9999min 5 temperature fluctuation: +-1% (full measuring range

Item Name: Ozone Test Chamber

Item No.: TW-307 (HJ-042)

Ozone Test chamber is used for testing

rubber and polymer. Put the sample in certain

density ozone environment, after having certain

discoloration or the scheduled time and compare

with the standard card.

1 Temperature control range： +10℃～ 60℃

2．Temperature uniformity： ±1℃

3 Ozone consistency： adjustable range 20－200pphm

4．Studio dimension （D×w×H）： 400×400×200mm

5. 16 pcs samples can be tested at the same time

Standards :AAATCC 109 ISO 105-G03 ASTM1149 ISO1431 GB7762-2003

GB/T136421-92 HG/T2869-97 GJB1217-91

Item Name: Q-Sun Xenon Fastness Tester

Item No: TW-306

This tester is used to simulate the largest accord

with the natural world-wide spectrum of

sunlight Xenon arc lamp reproduction under

different environments to the destructive wave,

affordable xenon arc instruments with sophisticated

controls for optimal weathering and lightfastness testing

Standard: GB/T16999，8427，8430；FZ/T75002；ISO105-B06，105-B04

Light source:xenon arc Lamp

cooling：Wind

revolution and rotation:5rpm,180℃/rpm

Sampling plywood：10

Dimension ：900×500×1650mm（L×W×H）

Power ：AC220V 3.0KW

Item Name: Temperature & Humidity Meter (30 Channels)

Item No.TW-305

Temperature range：-100~+250℃，

Humidity range： 10～99%RH（10～100℃）,

Humidity precision：

(humidity)≤±1%RH（40～99%RH，15～90℃）

(humidity)≤±2%RH（Other Humidity，15～90℃）；

The maximun: 30 channel temperature and 15 channel humidity (set temperature or

humidity through program.

Sensor Models：Pt100；

With print output, the print time can be set. Input every calibration parameter according to

the measure results.

Item Name: Chamber for Raining

Item No.:TW-304

This machine is for waterproof capability,

like electronic, measurements, shell, sealing parts

and components in rainy condition, Bin body is

made of stainess steel with clear window,

with turnable in test bin, with speed adjuster.

Working angle: 90℃ 180℃ 270℃

Specilications:

Water Spray circle R:400 mm

Hole Diameter of water spray : φ0.1mm

Hole diameter :16mm

Distance between hole and hole :50mm

Number of hole:25

The speed of water spray can be specified , range 0~99h 99m 99s

Wing speed: 2×600 about 12 s

Item Name: Salt Spray Tester

Item No. TW-303

The salt spray test instrument is one of testing equipment used for

Resisting humidity salty mist mold to keep artifical climate.It is also an

Important experiment equipment to research different kinds of enviroment

Adaptation and reliability of instruments can used for neutral salty mist experiment

specifications

1 Interior and exterior were made of PVC material,

Anti-corrosive, vibration-proof, easy to clean, does not have the divulging phenomenon

certainly

2 With high sprecision temperature indicator

3 Without overflow, with water obturation structure

4 Tower spray, mist distributes uniformity, The subsidence quantity adjusts freely, spray

nozzle with non-crystallization, dual pressure settings, as well as excess temperature

protection; with Continuously or the cyclical atomization optional , without the air-pressure

machine

5 precise glass spray nozzle, non-crystallization blocking within 400 hours

Watered by itself or manual once lack of water

Precision digital thermal controller , also with spray protection system.

Item Name: Thermal Shock Tester

Item No. TW-302

Shocked in low and high temperature

Specification: TSC-F

Standard: GB.GJB.MIL ,ASTM CNS.IEC.JIS

Material : Stainess steel(304)

Control precision: ±0.5℃

This machine is for testing the capability of the parts and material stay in high and low

temperature with a short time and long time . check the chemical transfer and physical

damage of inner changing, apply to testing metal, plastic, rubber , electronical and etc.

With touch color LCD

Item Name:Programmable Temperature and Humidity Tester

Item No.TW-301

Apply to testing the heat endurance, dry-endurance,

wet-endurance of electronics components,

industry stuff, toy, furniture and ect.

Temperature range：-20~1+100（150）℃，

Humidity range： 30%～98%RH,

Humidity precision：

(humidity)≤±1%RH（40～98%RH，15～90℃）

(humidity)≤±2%RH（Other Humidity，15～90℃）；

The inside dimension size:1mx1mx1m

Interior material: stainess steel SUS304#

Exterior material: Stainess steel SUS304#

Power :AC220V、1PH、50/60HZ

Safety device: With leakage and overloading protector

Item Name: Aging Yellowing Resistance Tester

Item No. TW-300

Products or materials in transit, through the

role of solar radiation and heat to make color

changes, the machine is designed to simulate

such an environmental testing products,

the degree of yellowing

Sample is generally believed that the product testing in three hours at 70℃ , about equal to

the natural environment within 2 months

Interior specification: A60*45*40cm,B90*60*50cm

Force Angle: 15°(24pcs)30°(15pcs)

Temperature control range:indoor temp.~ 80℃

Spray volum: 1~10cc/h

Temperature precision: ±0.3℃

Made stuff: F.R.P

Standard Accessories:test salt, The volume of barrels, tool

Power 1￠、220V/50HZ

Item Name: 45 degree Flammability Tester

Item No.TW-227

45 degree flammability tester, detection of the

combustion properties of textiles.

Stainess testing room with glass window

After the ignition, automatic time (0.01 second precision)

Automatic or manual firing device

matches the type with to brush the type equipment and the nylon hair brush. standard ASTM

D1230 FTMS 191-5908 CRF 16-1610CALIF TB 117NFPA 702

technical parameter:

1. spread time scope: 0-99.99s, resolution: 0.01s.

2. Firing time: 1s or establishes willfully.

3. Igniter model: Conforms to ASTMD1230.

4. External dimensions: 400×300×500mm(L×W×H).

5. Weight: 18kg.

6 Power AC 220V/50Hz/2A

Item Name: En71 Toy Comprehensive Flammable Tester

Item No.TW-226

Testing the child clothing or the toy

and accessories' combustibility, appraises

the following toy type the rapidity

of combustion and time

1. The child dresses clothes (put on makeup clothing),

particularly has clothes which and similar goods

2 the shawl, flutters hangs. The child may enter toy, like game tent and playroom

3. The child may embrace the toy, fills software toy

4. By styles and so on mask and wig appears may the toy standard which wears: EN71-2

2003

specifications

1. The PLC control, the time is accurate, Chinese man-machine contact surface.

2. The different test method provides different sample jig

3. The jig simplicity of operator facilitates

4. The jig may adjust willfully, suits different sample

5. Flame angle willfully adjustable size: 100×60×120(H) weight: 30Kg power : 220V/50Hz

Item Name: Surface Flammability Tester

Item No. TW-225

The superficial flammable reflectoscope reflector,

commonly used in the examination down or

the superficial knowledge fabric's flammability,

the flame spreads fast in the fabric surface,

but the fabric Kieb structure is incombustible.

Its motion butane burner in the fabric surface

derailing, may examine whether to have the

superficial flame and the record Kieb's damage

situation. technical norms:

1. Nozzle movement speed: 150 millimeters/second ±5 millimeter/seconds (bidirectional),

the nozzle moves the distance: ≥300 millimeter.

2. May test the fabric plush altitude: 0-70mm; Flame altitude: 0-60mm continuously

adjustable.

3. Volume: 600mm×400mm×370mm; Weight: 20kg.

4. Power : AC220V±10% 50Hz; Power: 50W.

5. Meet standards: BS4569, EN71

Item Name: Nail bed flammable tester

Item No. TW-224

standard：ASTM F963 ； dimension：25.4*25.4cm.

Item Name: Table Torque Gauge

Item No.TL-408

Double directional survey ability;

With biggest reading indicator;

With kgf.cm .lbf.in units double scale

carries on the zero position establishment from exterior;

precision: ±3%

Item Name:Sound Level Meter

Item No.TW-260

Test range: 30~130dBA, 35~130Dbc

automatic shift: 30~130 decibel

precision: ±1.5dB

Kinetic Energy Tester

Used to test related materials from the launch of the toys and toys from the launch of a

non-exclusive material that may be caused by the ejection of some, but not all of the

potential risk of accidents.

1. Power: 220AC/50Hz.

2. Size: 240mm × 310mm × 130mm.

3. Crystal: 1MHz

4. Time display numbers: 7.

5. Display range: 0.000001 to 9.999999 sec.

6. Shooting passage dimension: diameter 60MM (in channels)

7. Sensor Distance:

Within channel: Fixed 150mm external sensor: adjustable 40mm-420mm

8. Internal sensor sensitivity: greater than 2mm

Item Name : Dry Clean Machine

Item No.TW-261

Standards: ASTM D1230 ASTM F963 EN71

Using with each kind of combustion reflectoscope reflector ,

in the fabric burning test pretreation. Washing the burning

inhibitor off the fabric surface with the tetrachloroethylene

and do the combustion test on the fabric pretreatment.

With stainess steel body.

the shell of tank volume: 11. 4L

rotational speed: 45~ 50rpm

gyro-axle inclination angle: 50°±1°

timing control: 0~999 minute

weight: 50KG

Power: 220VAC 50HZ

Item Name: Button Pull Tester/ Button Snap Tester

Item No. TW-258

To define the garments manufacturer responsibilities

and duties to ensure that snaps are applied

appropriately to all garments. To prevent separation

between the snap and the garment, which represents

a dangerous situation if the loose snap is swallowed.

This test method cover an uniform force required to pull a snap attachment perpendicular to

the garment. The snap attachment is not forced to separate from the garment.

This test method is as per American Buyers and Covers almost all buyers specifications in

America

This method is required attachment of snaps to specimens using specifications provided by

the producers of the snaps.

size: 280 x 230 x 735 mm (L×W×H)

weight: 35 kg

standard: 16 CFR 1500.51-53, ASTM WK4510 PS79-96, ASTM F963, EN71-Part1, M&S P115A

Item Name: X Ray Fluorescence Spectrometer

Item No. TW-259

Specially designed for RoHS substance detection and full

element analysis and jewelery analysis

X fluorescence principle: Energy dispersion X-ray

fluorescence analytic method analytical element:

Na the ~U arbitrary element, the lead (Pb),

the mercury (Hg), six price chromium (Cr6+), the multi-bromine biphenyl (PBB) and the

multi-bromines unite the phenylate (PBDE) the bromine, analyzes six price chromium directly

(Cr6+) content

Technical specification: Picks out lower limit (Cd/Pd):Cd/Cr/Hg/Br≦2 ppm, Pb≦5 ppm

sample shape: Random size, willfully anomalous shape sample type: Revertex/metal/thin

film/powder/liquid

X ray tube: Target material /Mo tube voltage /5~50 kV tube electric current/biggest 1~1000

μA illumination diameter: 2nd, 5, 8mm

detector: Si(PIN) semiconductor high sensitivity detector

light filter: Eight kind of new light filter automatic selection

sample localization: Micro moving load platform (match)

sample observation: 30 time of colored CCD camera

micro area analysis: X light focuses the micro area analysis system (match) software the

quantitative analysis: Theory Alpha method of correlates (NBS-GSC law)

data processing: IMB PC/AT/above memory /256 MB/above hard disk /40 GB

system: Windows XP legal copy power: 1.1kW

weight: 40Kg

external dimensions: 550(W)×450(D)×450(H)mm

disposition: Standard

layout: Si(PIN) semiconductor high sensitivity detector (15000 hours) high-voltage power

supply (RSD

Item Name: Resistance Capability Tester

Item No. TW-255

Appy to the rope which connects children and toys ,

and a length of more than 2m of the toys and

kites and other flying toys, its resistance

must over 100MΩ/cm

To remind users that playing the kite at thunderstorms or near the grid will cause danger.

Item Name : Key-Press Tester

Item No. TW-256

Through simulating human hand repeatly

touch the key-press and switch to evaluate

the lifetime capability of toy key-press or

switch. Can be specified by customer.

Item Name: Infrared Thermometer

Item No.TW-250

Item Name: Moduel D

Item No.TW-249

Conforms to EN71-8:2003, imitates the human body (big head ) the aperture test module

Item Name: Electronic Bursting Strength Tester

Item No. TW-216

This tester is suitable for the various

packing material, including common paper,

corrugated paper, toilet paper, packing,

paper and ect…., also for the leathers,

the cloth class, packs above the thin film,

but effective carries on the monitor to the

product quality. The TNB005B even may print

the test value and the mean value, time, data meet standards and so on

date: JIS-P8112, L1018, ASTM-D2210, TAPPI-T403

each parameter: Induction

way: Pressure switch

Printing data: Test value and mean value, time, data (TNB005B) instruction ways

date: Digital A/D value entering rate 100 /S, the test precision is high, 5 group of memory

test result capacity choice: 0~100kg/cm2 flowing tubing head

pressure speed: High-pressured 170±10ml/min

motor: 1/4HP volume (W*D*H):43*53*53cm

weight: 68kg

power: 1∮, AC220V,3 A electronic formula resistance to spalling testing machine B electronic

formula resistance to spalling testing machine (including printer)

Item Name:TTF Push & Pull Tester

Item No. TL-404

Manual controllor can change the status at anytime

Regulation of entry and discharge flow rate can make

different speed combination

Item Name: Torque Guage

Item No. TL-409

Measurement used to measure

the product or product components to

be capable of sustaining a much torque

This guage is used to measure the capable

torque of product or components, record the max value of torque.

Standard：ASTM F963, EN71

mark：QA in the toy industry usually use BTG-type torque，like BTG torque guage, 9BTG or

15BTG

Item Name: Impact Tester

Item No. TW-201

Reduce the material damage or the

danger of imitation Toys protection devices as the real face.

Range: imitation protect device ( clear material protector, headpiece,cap,blinker)

Standards: EN 71-1998 8.7

Specification: bottom board 300(l)x300(w)x16(h)mm 2 adjustable height: 0-200mm 3.

impact hammer diameter: 80.00mm, impact bammer weight: 1Kg

5 Metrics / imperial units high sensitive rule

Item Name: Rattle Test Fixture

Item No.TW-203

Oval / round rattle tester (audible toys test template)

is a simulation of children's oral capacity, testing toys or toy parts on the potential risk of

suffocation or swallow

Standard: 16 CFR 1510 ；ASTM F 963 4.21；EN71-1998 8.17；GB6675-2003 A.5.3

material ：Aluminum alloy, surface oxidation

Item Name: Crock Meter- Manual

Item No. TW-215

The manual crock meter is designed to test the discoloration extent of dry textile and leather

after abrasion. The rubbing hammer of this crock meter is wrapped with dry or wet white

cotton cloth, then rubbed on the specimen clamped to the testing table ten times for 10

seconds. The cloth is then removed to evaluate the discolor level in comparison with a

gray-scale.

Item Name :Nine Steps Chromatic Transfrence Scale

Item No. TW-214

To visually evaluate colour transfer or staining, nine steps

Standard: AATCC Evaluation Procedure 8

Item name:Gray Scale

Item No. TW-213

For assessment of change in colour and staining

in colourfastness testing 1-5 steps

with half steps, in wallet.

AATCC standard gray scale, apply to assessment of change in color and staining in

colorfastness testing 1-5 steps, with half steps, in wallet.

AATCC fade gray scale, meet to ASTM/AATCC/American standard

AATCC staining gray scale, meet to ASTM/AATCC/American Standard

ISO/BS standard gray scale，apply to assessment of change in color and staining in

colorfastness testing 1-5 steps, with half steps, in wallet.

ISO/BS fade gray scale，Standard：BS EN 20105-A02，ISO 105-A02， BS 1006 A02，M&S

C2。

ISO/B staining gray scale，standard：BS EN 20105-A03，ISO 105-A03， BS 1006 A03，M&S

C2。

Homemade gray scale，pply to assessment of change in color and staining in colorfastness

testing 1-5 steps, with half steps, in wallet.

Item Name: Color Assessment Cabinet

Item No. TW-212

This cabinet is used for textile,dyeing, printing,

plastic, painting, print ink, photography and similar industry.

Detailed specification

With good apperarence, LCD display. Touch control switch, Automatic power-off memory

function, the cumulative light time.

light source types

1.D65 International standards artificial daylight

2.F/A Sunset light, yellow light, family light, hotel light

3.CWF Americal store light

4.TL84 western Europe , Janpanese store light

5.UV power 1∮、220V/50HZ

Item Name: Sharp Point Tester

Item No. TW-221

For Assessment if the product meet to sharp point standard.

The purpose of consummer safty specification is to establish nationally recongized sarety

Requirements for toys.Its application will minimize accidents in the normal, intended use and

reasonaby foreseeable abuse of the toys covered by the specification.

Standard： 16 CFR 1500.48 ASTM F 963 4.8 EN-71 1998 8.12

Item Name: Sharp Edge Tester

Item No.TW-220

The sharp edge tester is used to determine whether accessible edges of toys for use children

are liable to cause injury to the child

Standard: 16 CFR 1500.49 ASTM F 963 4.7 EN-71 1998 8.11

Accessories

Charging units complete with connector

Foot switch

Standard import sharp edge paper

Destop fixed board

Item name : Small Parts Tester

Item No. TW-206

An invaluable safety item for parents, the Small Parts Tester is a tool used to determine if a

toy, toy part or other item poses a choking risk to children under age 3. Note that this is a tool

for parents, not a toy for children.

Standard: ASTM F963 4.6, EN71-1998 8.2,GB6675-2003 A.5.2, 16 CFR 1501

Item Name: Bite Tester

Item No. TW-207

Purpose

To minimize potential hazards for toys that a child may put in its mouth.

• Products intended to come in contact with the mouth or intended to be bitten. Refer to

Appendix A for product examples.

• Products that look like food per QSOP 0006-3048, Food Imitations

• All products age graded for children under 36 months

Simulation of the teeth of children, toys for testing the surface of parts and accessories to

highlight our ability to bear the bite.

Standard: ASTM F963, 16CFR 1500.52C

Pacifiers fixture

conforms to 16 CFR 1511（ASTM F 963 4.22）

standard

Vertical Flammability Tester

This tester is used for testing the inflammation capability of children’s sleepwear and decoration of fabric. Including stainless steel cabinet with observation window and back wall painted black for easy test viewing. Calibrated burner. Flame speed is measured in time. Specimen holders, burners and associated hardware are dependent on the test standard and must be specified. Temperature & Humidity Meter It is characterized at : large-character LCD display,multi-function,low power

consumption,high stability & accuracy. Feature: display temperature,humidity and time

simultaneously memory of MAX & MIN measuring value 12- hour/24 hour displaying

system selectable C degree / F degree unit selectable Integral-hour alarm function

Alarm function clock & calendar function (month and date) desk-top placing or wall

hanging Temp range: _50+70 degree(-58+158 F degree) Humidity range:10%-99%RH

storge condition:-20 degree~60 degree,20~80% RH

TW-229 Mouth Toy Endure Tester

Applications: To prevent mouth moving toys or children's mouthpiece has been mistakenly inhaled and

cause a choking hazard. Features: 1. Instruments to meet the 5s at least 295 cubic centimeters within + /

-10 cubic centimeters of gas, and can be 10 times alternately blowing, suction toy. Parameters: 1. Overall

dimensions (L × W × H mm): 800 × 500 × 500 standard: EN71.8.17

TW-228 Toy Box Cover Durability Tester

To test the durable lid and durability of toy box covers

Test principle: GB EN

Test Views: 0 ~ 999,999 times

Can be set Test Frequency: 0 ~ 10 times / min

Display: Large LCD touch screen

Digital Display Control: microcomputer automatic control

Action mode: Electric Automatic

The specimen is damaged: Automatic shutdown

Liquid Leak Test Needle

Diameter 1MM, the top radius 0.5MM steel needle, load 5N, for leakage testing, GB A.5.19

PROJECTILE VELOCITY TESTER Used to test related materials from the launch of the toys and toys from the launch of a non-exclusive

material that may be caused by the ejection of some, but not all of the potential risk of accidents.

1. Power: 220AC/50Hz.

2. Size: 240mm × 310mm × 130mm.

3. Crystal: 1MHz

4. Time display numbers: 7.

5. Display range: 0.000001 to 9.999999 sec.

6. Shooting passage dimension: diameter 60MM (in channels)

7. Sensor Distance:

Within channel: Fixed 150mm external sensor: adjustable 40mm-420mm

8. Internal sensor sensitivity: greater than 2mm

Sound Lever Meter

Applicable standards: IEC 651 Type2

Range: LO (Low) - Weighted: 35 - 100dB A HI (High) - Weighted: 65-130dB C LO (Low) - Weighted: 35 -

100dB C HI (High) - Weighted: 65-130dB

Resolution: 0.1dB

Frequency Range: 31.5Hz to 8KHz

Accuracy: ± 2dB

Redo Range: 65dB

Balance the network frequency: A, C

Operation temperature and humidity: 0 ℃ to 40 ℃ <80% R. H

Storage temperature and humidity: -10 ℃ to 60 ℃ <70% R.H.

Display: 3 1 / 2 digit display

Power Supply: 1 9V battery

Dimensions: 240mm (L) x68mm (W) x25mm (H)

Weight: 215g

Annex: leather, test sticks, batteries, manual, wind-ball

Metronome Alternative voices, machinery, wooden fish three kinds of sound time clock function allows you to

exercise reasonable control of the time can freely adjust the volume Large LCD display

Feeler Gauge Stainless steel thickness 0.4mm, radius of arc-bit 3mm

Standard: EN71-1

Bending Testing Plywood (ASTM,EN) It is used for test the toys from the increase in rigid or fixed form of the metal wire or other metal materials

used in the bending (or abuse),

，if because of the risk of fracture resulting from a sharp edge or sharp edge of the prominence

。it is toy misuse testing item.

Standard ：ASTM963

Direct current field Gauss Meter Easy to use, simple operation, is KANETEC through the production of magnetic products accumulated in

the course of experience and success developed a manual test electronic display type Gauss Meter.In

addition to the original features, the new models to increase the output of the RS232 interface, can also

buy cable will determine the data transfer to a personal computer.

indicate range 0-1500MT

Model TM-701 (with RS232 output port)

DC, AC magnetic beam density

Unit MT / G-cut alternative; 1T = 10000G

Measurement mode decomposition can indicate the accuracy of determination of the scope

DCX1 0-200mT 0.1mT ±5%

200.1-1500mT 1mT ±5%

DCX10 0-150mT 0.01mT ±5%

ACX10 0-200mT 0.1mT ±5%

0-75mT 0.01mT ±5%

five digits LCD display

Forms Check the numbers

Polarity level

Function of zero-level

Max Auto Power Off

Temperature 0 - +40 ℃

Power 1.5Vx4

Volume size 140 × 64 × 30mm

Standard Accessories probe, batteries, soft leather bag

2m / s Impact test machine 1Comply with EN71 Standard

2. impact speed: 2m / s

3.impact stroke: 2m

4. one testing load comply with EN71 standard

5. using speed table control, there is only one speed.

6. Dimensions: L4.5m × W1.8m × 2m

7. Power: 220V/50Hz 6A

Item Name: Index Moisture Meter

Item No. TW-208

To determine the moisture content percentage of fibre, yarns and fabrics, natural, syntheti

cs and blends supplied with 3 probes for fibre, yarn and fabric, blend conversion charts and

carrying case (battery operated).

Resolutions 0.1

Precision：±（0.5％n＋1）

Temperature：-10～60℃

Power supply: 4 pieces battery

Dimension ：178X68X39mm

Item Name: Durawash Washing Machine

Item No TF-006

Simulate the conditions to meet leading chain stores standard garment and fabric durability

tests.

Features

Multi range timer with audible end of cycle alarm and

Automatic agitator shut off

Temperature indication and control with accuracy of +/-0.25% of controller range

Push button tank drainage with inline filter to a magnetically coupled drain pump for

reliability.