it comes from the desire to make the - heavy duty … · it comes from the desire to make the ......

Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right to improve our products and make changes in specifi cations, designs and standard equipment without notice and without incurring obligation. See your dealer for details on all of our warranties.

Exmark®, Turf Tracer®, Lazer Z®, Metro®, Pioneer®, Vantage®, Phazer®, Quest®, Exmark Parts Plus®, Navigator®, and UltraVac® are registered trademarks, and Viking™, UltraCut™, Micro-Mulch™ and CustomRide™ are trademarks of Exmark Mfg. Co., Inc.

Kohler® is a registered trademark and Kohler® Command™ is a trademark of Kohler Co. Kawasaki® is a registered trademark of Kawasaki Motors Corp. Turf Mate®, Turf Master®, Turf Saver® and Multi-Trac® are registered trademarks of Carlisle Tire & Rubber Co.

Kubota® is a registered trademark of Kubota Engine America Corp. Honda® is a registered trademark of American Honda Motor Co., Inc. Hydro-Gear® is a registered trademark of Hydro-Gear.

© 2012 Exmark Manufacturing Company, Inc. All rights reserved. Printed in the U.S.A. 2012 Form No. 116-6520

Exmark Mfg. Co., Inc. / 2101 Ashland Avenue / P.O. Box 808 / Beatrice, NE 68310-0808 / Call 402.223.6300 / Fax 402.223.6384

2012

WHERE DOES PRIDE COME FROM?

222 3

444 5

EXMARK DIFFERENCE

If you’re an Exmark owner, chances are, you had a hand in building your machine. Whether you know it or not, you’re the reason the deck is deeper, the controls

are smoother and the parts are fewer.

Before we build machines, we go into the fi eld and ride

alongside our customers. We get sweaty. We get tired.

We get the best feedback. Then we gather our fi ndings

and get busy putting everything we learned into each

nut and bolt.

But that’s only part of the story. Our lines of communication

are always open. Along with our tireless poking and

prodding, we’re supported by our incredible customer

service department. Those guys always do us proud.

So if you want to tell people you help build the best

commercial-grade machines in the industry, go ahead.

It’s not too far from the truth.

AD

VA

NTA

GE

AD

VA

NTA

GE

IT COMES FROM THE DESIRE TO MAKE THELANDSCAPE MORE BEAUTIFUL.

7

If you’re reading this thinking, “Who is Exmark?” we invite

you to get to know us by test-driving one of our mowers.

Jump on. Fire it up. Take it in the fi eld. We’re confi dent

that you’ll be impressed.

If you have any questions, speak to one of our Exmark

dealers. And don’t be surprised if you’re impressed with

them as well. All of our dealers are straight-shooters who

take pride in helping pros any way they can. That’s why

we partner with them. And with a strong dealer network,

it shouldn’t be hard to fi nd a local one in your area. Then

you’ll get the full picture of why Exmark mowers are

preferred by pros more than any other brand.

666

IT COMES FROM NEVER SETTLING, NOTWITH ANYONE OR ANYTHING.EXMARK COMMERCIAL QUALITY

If you’ve ever used an Exmark, then we don’t need to tell you that they’re high-quality, low-maintenance, commercial-grade machines. You already know from

experience that they’re exceedingly durable and incredibly productive. And that they require little maintenance.

QU

ALI

TY

QU

ALI

TY

HYDRO DRIVE SYSTEM

Our hydro drive system is how most things should be:

painless. It’s exclusively designed to contain fewer parts

and pieces, reducing maintenance and increasing durability.

Take its unitized pump and wheel motor. They eliminate

hoses and potential leak points. And the tow valves can be

operated without the use of tools, not to mention that the

customized valving provides smooth control. Like we said,

painless.

DECK

It doesn’t matter how much experience you have. It doesn’t

matter how many hours you clocked in the fi eld. If the cut

doesn’t look good, you’re done. That’s why we worked hard

in perfecting our cutting decks. Let’s take a look inside:

The patented fl ow-control baffl es accelerate airfl ow under

the deck, resulting in the easy movement of materials and

a more even discharge. We’ve optimized the blade-tip

speed, which optimizes discharge distance and uniformity.

All the components in our deck work together to deliver a

standout cut, job after job after job.

SPINDLES

Meet the superheroes of spindles. Their superpowers lie

in their simplicity and durability. Made from tough cast

aluminum that houses sealed ball bearings, they can

withstand the effects of impact and moisture. They’re also

maintenance-free—yet another superpower.

9888

CUTTING TECHNOLOGY

If you want to build the very best commercial-grade machines, start with the very best commercial-grade components. Exmark’s decks, hydro drive systems and

spindles are a testament to that. They make our mowers more durable—and more reliable and a heck of a lot more popular.

IT COMES FROM THE TIRELESS PURSUITOF THE PERFECT CUT.OF THE PERFECT CUT.OF THE PERFECT CUT

THE

CU

T

THE

CU

T

QUEST ®

TRACTION AND HANDLING:The Quest’s parts and pieces are arranged in its frame in a way that optimizes traction with a lower center of gravity, making it an incredibly smooth ride. Its zero-turn technology will have you easily maneuvering around the landscape, for an even faster fi nish.

CUT QUALITY:The cutting deck works hard to deliver the exclusive Exmark cut in no time. It employs serious cutting technology that banishes stragglers and double-cutting. It not only cuts grass beautifully, but also cuts your mowing time, which is also a beautiful thing.

SEAT:On the Quest, comfort starts with the seat and seating suspension. The coil spring seating system provides a smooth ride over uneven terrain. Quest users will fi nd that being comfortable while mowing makes the task seem even shorter.

A RESIDENTIAL RIDER DESIGNED TO IMPRESS.

What happens when you come from a family of

overachievers? You do everything you can to get noticed.

Just like this zero-turn mower. The Quest delivers the kind

of cut that gets a major nod from the lawn enthusiast. It’s

designed for the guy who wants his yard to stand out in his

county, not just the neighborhood. Wherever the Quest

mows, it results in a million-dollar cut. You better believe

the Quest lives up to the family name.

MODELS INCLUDE:

Quest E-Series

Quest S-Series

See pages 42 and 43 for Quest specs.

RID

ER

S

RID

ER

S

B C D

high-quality threaded pneumatic tires for a smoother ride

single-point rake adjust for easy deck adjustment

wash-out port for easy cleaning

exclusive Exmark fl oor mat for reduced vibrations

A

B

C

D

The cutting deck works hard to deliver the exclusive Exmark cut in no time. It employs serious cutting technology that banishes stragglers and double-cutting. It not only cuts grass beautifully, but also cuts your mowing time, which is also a beautiful

11101010

A

PIONEER®

A MOWER WITH A HEAD FOR NUMBERS.

It’s a given that all Exmark mowers are exceptional

machines that hold their value. But of the rider family lineup,

the Pioneer sets itself apart. It’s one heck of a workhorse

that has made its mark in the value price category. It delivers

precision, durability, comfort and traction with every job.

And, of course, one heck of a cut. Do the math and compare

for yourself. You’ll realize that no other similarly equipped

machine comes close to the Pioneer’s commercial-grade

performance and quality. After all, it’s an Exmark.

MODELS INCLUDE:

Pioneer E-Series

Pioneer S-Series

See pages 44 and 45 for Pioneer specs.

RID

ER

S

RID

ER

S

HYDRO-GEAR®:The Pioneer’s hydrostatic drive system makes the Pioneer S-Series a smooth ride. The system includes charge pumps, steel-cut gears and shock valves that deliver years of reliable service.

CUTTING DECK:This machine takes its job of cutting grass seriously. It’s equipped with Exmark’s patented deep cutting deck that improves cutting effi ciency and delivers attention-grabbing results.

FRAME:Fewer parts and pieces—that’s one of this mower’s strengths. With a simplifi ed design and a reduction in the number of moving parts, this machine promises to be low in maintenance and high in reliability. Really high.

A B C D

7-gallon single-point fuel tank

transport lock for convenient trailering

bolstered seats with coil spring suspension

greaseless spindles eliminate yearly greasing

A

B

C

D

Pioneer S-Series a smooth ride. The system includes

13121212

HYDRO DRIVE SYSTEM:This system has no hoses, with reduced leak points and only annual maintenance required. It also boasts a serviceable pump and motor. When used with exclusive Exmark hydro oil, it becomes even more maintenance-free.

LAZER Z®

THE ONE AND ONLY LAZER Z.

Ever talk to a Lazer Z owner about his machine? No? In

conversation, owners usually throw out comments like,

“Best machine ever,” “It’s a workhorse. Just keeps going

and going,” “No way am I going to use anything else,”

and “Don’t even think about jumping on my machine.”

What causes them to make such strong statements? With

the Lazer Z, it could be a number of things. Like its simple

design, resulting in fewer parts and less maintenance.

And its undeniable cut quality that fosters pride from the

operator and envy from everyone else. And we can’t forget

about the increased comfort factor. See, so many things to

like about the Lazer Z.

Maybe you should ride one and chime in with your very own

strong statement.

MODELS INCLUDE:

Lazer Z E-Series

Lazer Z S-Series

Lazer Z X-Series

Lazer Z DS-Series (see next page).

•EFI units available •Propane units available

See pages 46 to 48 for Lazer Z specs.

RID

ER

S

RID

ER

S

UNIBODY FRAME:Studying automotive manufacturing helped us construct this lighter and more durable frame. With it, we can position the body lower to the ground, improving center of gravity, balance and traction in most conditions. As an added perk, it’s made the machine easier to handle.

SEATING SYSTEM:Forget the seat when you can have a seating system. It has a 3-dimensional motion isolation design that reduces vibrations, bumps and jarring. And rubber mounts that allow 0.5-inch free movement in all directions, resulting in a smoother ride and a back that experiences less pain.

ground, improving center of gravity, balance and traction in most conditions. As an added perk, it’s

A B C D

rear-sloping ROPS bar defl ects branches from operator

panhard rod used in race cars eliminates deck sway

single-point height adjust matches cutting height on fl eet

easy-to-read operator diagnostics

A

B

C

D

15141414

B

LAZER Z® DS-SERIES

RED AND GREY ON THE OUTSIDE,

GREEN ON THE INSIDE.

If you don’t believe that a mower can strike a balance

between commercial mowing and environmental

consciousness, then you haven’t met the Lazer Z diesel.

It’s a hard-working machine that’s ready to tackle the grass

but leave the environment intact. Its heavy-duty frame

and engine cooling system keep it from early retirement

so it can continue delivering a picture-perfect cut, even

under the toughest conditions. Its large drive tires optimize

traction and stability. So what you have here is a productive

machine that’s focused on doing its part in keeping the

planet beautiful.

See page 49 for Lazer Z DS-Series specs.

RID

ER

S

LARGER DRIVE TIRES: The Lazer Z diesel sports 4-ply Multi-Trac® drive tires that optimize traction and stability, for a smoother ride over uneven ground.

SERIES 5:Here’s a deck that’s affl icted with grass perfectionism. Its Exmark-exclusive baffl e design and deep platform make each blade of grass stand at attention as the blades cut in unison, leaving no stragglers behind.

SEAT SUSPENSION:Comfort comes standard on this diligent worker. Elastomeric Vibration Control (EVC) material and suspension respond to bumps and jars, providing better cushioning. Doing good for the environment and doing good for your body—that’s just how this mower rolls.

radiator position and wavy screen ensure effi cient cooling

canister air fi ltration system improves productivity

iso-mounted diesel engine reduces vibrations

welded, heavy-duty steel frame designed for extreme mowing conditions

A

B

C

D

A B C D

17161616

better cushioning. Doing good for the environment and doing good for your body—that’s just how this

RID

ER

S

NAVIGATOR®

A MOWER THAT FITS IN ALMOST ANYWHERE,

INCLUDING ON HIGH-END PROPERTIES.

Owners of high-end properties are a particular bunch.

They want their lawns to be perfectly manicured. They want

each blade to be in place. And they don’t want to see any

grass clippings. The Navigator was designed for such a job.

With its exclusive Exmark deck and dedicated collection

system, it leaves behind nothing but that “straight out of

the pages of a magazine” lawn that customers demand.

But let’s not forget that this mower comes with all of the

advantages of being an Exmark, including better operator

comfort, higher ground speed and undeniable productivity.

Those are the kinds of benefi ts that impress a certain

discriminating customer—you.

•EFI units available

See page 50 for Navigator specs.

RID

ER

S

RID

ER

S

GEARBOX:The splined PTO shaft, with its high-speed U-joints and shear pins, provides complete blade drive protection. And if you ever need to disconnect it, a drive shaft coupling near the engine allows for speedy removal.

DRIVE CONTROL SYSTEM:Even with its large dedicated bagger in the back and a hefty frame, the Navigator practically glides over the landscape. Its exclusive control system allows for smooth maneuverability, even at higher mowing speeds.

COLLECTION SYSTEM:Reduce emptying and job time with the large 9.5-bushel hopper. Attached is a discharge diffuser with an exclusive baffl e design that more evenly fi lls the hopper from rear to front. Even better, the 18% higher blade tip speed slices grass into fi ner particles, increasing the hopper’s load.

A C D

exclusive fi ll-reduction system provides bagging fl exibility

full-fl oating deck design minimizes scalping

feather-touch control system enhances precision

independent gear-reduction wheel motors increase control

A

B

C

D

B D

19181818

VANTAGE®

RISE ABOVE.

If you’re a stand-on kind of guy, then here’s a mower that

stands out from the rest. With its large operator platform

and ergonomic levers, the Vantage is designed to keep

you comfortable all day as you move from job to job to job.

But comfort isn’t the only benefi t going for it. It’s chock-full

of everything that’s characteristically Exmark: durability,

reliability, ruggedness, superior traction and handling.

Of course you can’t forget about the kind of cut it delivers—

a cut that gives your goose bumps goose bumps.

•EFI units available

See page 51 for Vantage specs.

RID

ER

S

RID

ER

S

OPERATOR PLATFORM:The Vantage’s superior weight distribution and larger, rubber platform with self-compensating suspension allows pros of all shapes and sizes to stand in comfort. And if you feel like stretching your legs, the platform folds up, turning the stand-on into a walk-behind.

STEERING SYSTEM:The ergonomically designed control system, called the Limited Variable Speed bar, includes an adjustable front reference bar that can vary the top-end speed of the machine. The sides of the controls are angled to accommodate the natural position of the hands and wrists.

TRACTION AND HANDLING:For better weight distribution, the heaviest components are positioned in the front while the operator stands behind the tires. The mower’s wide stance allows the operator to shift his body weight in response to the changing landscape, making it a smoother ride over varying terrain.

rubber heat shield separates user from drive system heat

heavy-duty muffl er guard reduces muffl er wear and tear

UltraCut™ deck ensures beautiful results with each pass

adjustable rear tire stance improves stability

A

B

C

D

A B C D

21202020

SPEC

S

SPEC

S

RIDINGMOWERS

•EFI unit

•Propane unit

23222222

MODEL NAME Quest E-SeriesQuest E-Series Quest S-Series Pioneer E-SeriesPioneer E-SeriesPioneer E-Series Pioneer S-SeriesPioneer S-Series Lazer Z E-SeriesLazer Z E-Series Lazer Z S-SeriesLazer Z S-Series

DECK SIZE 42” 50” 50” 48” 52” 44” 48” 52” 60” 48” 52” 60” 48” 52” 60” 72”

ENGINE BRAND Kawasaki® V-Twin Kawasaki V-Twin Kawasaki V-Twin Kohler® Command™ Kohler Command Kawasaki V-Twin Kohler Command Kawasaki V-Twin Kohler Command Kawasaki V-Twin Kohler Command Kohler Command Kohler Command EFI Kawasaki V-Twin Kohler Command EFI Kawasaki V-Twin Kawasaki V-Twin

ENGINE MODEL FR651V FR691V FR691V FR651V FR691V FX600V FX651V CV680 CV740 FX600V FX691V CV740 FX651V CV680 FX691V CV740 CV740 ECV730 FX801V–Propane ECV749 FX801V FX801V–Propane

CHASSIS Unibody • Riveted 10-ga. steel Unibody • Welded • Heavy-duty 2" square tubular steel Unibody • Welded • Heavy-duty 2" square tubular steel Unibody • Welded • Heavy-duty 1.5" x 3" Tubular steel Unibody • Welded • Heavy-duty 1.5" x 3" tubular steel

DECK SYSTEM Exmark Series 1 • Stamped steel deck • 4" deep •Cutting heights from 1.5"– 4.5"

Exmark Series 2 fabricated steel deck •4" deep • Cutting heights from 1.5"– 4.5"

UltraCut™ Series 4 • 4" deep deck • Cutting heights from 1.5"– 5" • Hex-style spindle blade driver • Chain support and transport lock

UltraCut Series 3 • 5.0" deep deck • Cutting heights from 1.5"– 5" • Wide-fl ange cutter housings with spindle driver • Chain support and transport auto-lock

UltraCut Series 4 •4" deep deck • Cutting heights from 1.5"– 5" •Hex-style spindle blade driver • Chain support and transport lock

UltraCut Series 4 • 5.5" deep deck • Cutting heights from 1"– 4.5" • Wide-fl ange cutter housings with spindle driver • Chain support and transport auto-lock •Single-point, fi nite height adjustment

UltraCut Series 4 • 5.5" deep deck • Cutting heights from 1"–5.5" • Standard-duty cutter housings • Wide-fl ange cutter housings with spindle driver • Chain support with side spring and transport auto-lock • Single-point, fi nite height adjustment • Patented deck support struts

PTO 80 ft-lbs 125 ft-lbs 125 ft-lbs 125 ft-lbs 175 ft-lbs 175 ft-lbs 200 ft-lbs 200 ft-lbs

SPEED 0-7 mph 0-7 mph 0-7 mph 0-8 mph 0-9 mph 0-8 mph 0-10 mph

DRIVE SYSTEM ZT2100 Integrated transmission

ZT2200 Integrated transmission

ZT2800 Integrated transmission

ZT2800 Integrated transmission ZT3100 Integrated transmission Dual Hydro Gear ZT3400, hydro-static transmission

Exmark exclusive Parker unitized pump and wheel motors • No hoses–12cc pumps Exmark exclusive Parker unitized pump and wheel motors • No hoses • Integrated cooling fans–12cc pumps

FUEL CAPACITY 2.9-gallon • Single fi ll location 2.9-gallon •Single fi ll location

7-gallon • Single fi ll location 7-gallon • Single fi ll location 8-gallon • Single fi ll location 12-gallon • Single fi ll location 8-gallon capacity 10.3-gallon propane tank 12-gallon • Single fi ll location 10.3-gallon propane tank

SEAT High-back foam padded seat

Commercial-gradehigh-back seat

Commercial-gradehigh-back seat

Commercial-grade high-back seat Commercial-grade high-back seat Commercial-grade high-back seat Deluxe, two-tone bolstered seat with Elastomeric Vibration Control (EVC) material

DRIVE TIRES 18 x 7.5-8 • 4-ply Turf Tech TL 20 x 8-10 • 4-ply Turf Master®

20 x 8-10 Turf Master 22 x 9.5-12 Kenda Tires 23 x 10.5-12 Kendra 22 x 9.5-12 Turf Master 23 x 10.5-12 Turf Master 23 x 9.5-12 • Turf Master 24 x 12-12 • Turf Master

FRONT CASTER TIRES 350/410 x 4 Smooth tread •

Pneumatic13 x 5 ribbed tread •

Pneumatic13 x 5 Ribbed tread •Pneumatic

13 x 5-6 • Smooth-tread • Pneumatic 13 x 5-6 • Smooth-tread • Pneumatic 13 x 5.0-6 • Smooth-tread •Pneumatic

12 x 5-6 • Smooth-tread • Pneumatic 13 x 5.0-6 • Pneumatic 13 x 5.0-6 • Smooth-tread • Semi-pneumatic 13 x 6.5-6 • Smooth-tread •Semi-pneumatic

13 x 5.0-6 • Smooth-tread • Semi-pneumatic 13 x 6.5-6 • Smooth-tread • Semi-pneumatic 13 x 5.0-6 • Smooth-tread •Semi-pneumatic

INSTRUMENTATION Optional hour meter Optional hour meter Standard hour meter Standard hour meter Operational diagnostics • Integral fuel gauge and hour meter Operational diagnostics • Integral fuel gauge and hour meter

MODEL # QTE651KA421 QTE691KA501 QTS691KA502 PNE651KA482 PNE691KA522 PNS600KA443 PNS651KA483 PNS680KC523 PNS740KC604 LZE600KA484 LZE691KA524 LZE740KC604 LZS651KA484LZS651KA484CA

LZS680KC524 LZS691KA524CA LZS740KC524 LZS740KC604CA LZS740KC604

LZS730EKC604 LZS801PKA604 LZS749EKC724 LZS801KA724 LZS801PKA724

SPEC

S

SPEC

S

RIDINGMOWERS

MODEL NAME Lazer Z X-SeriesLazer Z X-Series Lazer Z DS-Series NavigatorNavigatorNavigator Navigator Decks Vantage

DECK SIZE 48” 52” 60” 72” 60” 72” 42” 48” 36” 48” 52” 60”

ENGINE BRAND Kohler® Command™ Kohler Command Kohler EFI Kawasaki® V-Twin Kohler Command Kohler Command Kubota® Diesel Kohler Command Kohler Command EFI Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Kohler EFI Kohler EFI

ENGINE MODEL CV680 CV740 CV740 ECV749 FX801V CV940 • CV980 CV940 • CV980 D902 CV640 • CV740 ECV730 FS541V FS651V FS691V FS691V ECV730 ECV740

CHASSIS Unibody • Welded • Heavy-duty 1.5" x 3" tubular steel Welded • Heavy-duty tubular steel Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0" • Strategically located, continuous-force counterweight springs

Welded • Heavy-duty 1.5" x 3" Tubular steel

DECK SYSTEM UltraCut™ Series 6 • 5.5"-deep deck • Cutting heights from 1"– 5.5" • Premium, heavy-duty cutter housings • Heavy-duty support with side spring and transport auto-lock Single-point, fi nite height adjustment • Patented deck support struts

Series 5 • 6" deep deck • Cutting heights from 1"– 5" • Premium, heavy-duty cutter housings • Heavy-duty support with dual side springs and transport lock

Full fl oating rear-discharge cutting deck with heavy duty gear driver • Spindle assembly • Cutting heights 1"– 4"

UltraCut Series 3 •5" deep deck • Cutting heights from 1"– 5"

UltraCut Series 4 • 5"-deep deck • Cutting heights from 1"– 5"

PTO 200 ft-lbs 200 ft-lbs 200 ft-lbs 200 ft-lbs 250 ft-lbs 250 ft-lbs 250 ft-lbs 6” brake band 175 ft-lbs 200 ft-lbs

SPEED 0-10 mph 0-11.5 mph 0-12 mph 0-7 mph 0-8 mph

DRIVE SYSTEM Exmark-exclusive Parker unitized pump and wheel motors •No hoses • Integrated cooling fans–12cc pumps

Exmark-exclusive Parker unitized pump and wheel motors • No hoses • Integrated cooling fans–16cc pumps Dual Hydro-Gear® 21cc pumps power •18-cubic-inch wheel motors

Dual Hydro-Gear 12cc variable-displacement pumps power •Hydro-Gear planetary reduction motors

Two Hydro-Gear 10cc pumps powering two Parker 12-cubic-inch motors

FUEL CAPACITY 12-gallon • Single fi ll location 15.5-gallon twin fuel tanks 7.5-gallon • Pivoting tank 8-gallon • Single fi ll location

SEAT Deluxe, two-tone bolstered seat with Elastomeric Vibration Control (EVC) material • Innovative Seat Isolation System (SIS) • Fore and aft adjustment from operator’s position with seat fl ip-up* Hinge-mounted, deluxe, two-tone, bolstered full-suspension seat with Elastomeric Vibration Control (EVC) material •Adjusts to individual operator weight, and features padded, height-adjustable armrests

High-back, Elastomeric Vibration Control (EVC) seat

DRIVE TIRES 24 x 9.5-12 • 4-ply Multi-Trac® 24 x 12-12 • 4-ply Multi-Trac 26 x 12-12 • 4-ply Multi-Trac 18 x 10.5-10 Multi-Trac C/S 18 x 8.5-8 Kenda® Tires 20 x 10.5-8 Kenda Tires

FRONT CASTER TIRES 13 x 5.0-6 Smooth-tread • Semi-pneumatic tires 13 x 6.5-6 Smooth-tread • Semi-pneumatic tires 13 x 6.5-6 Smooth-tread • Semi-pneumatic tires 8 x 3-4 Semi-pneumatic 11 x 4-5 • Smooth-tread •Semi-pneumatic tires

11 x 4-5 • Smooth-tread • Semi-pneumatic tires

INSTRUMENTATION Operational diagnostics • Integral fuel gauge and hour meter Mechanical fuel gauge • Standard hour meter Translucent visual fuel indicator Standard hour meter

MODEL # LZX680KC486 LZX740KC526 LZX740KC606 LZX740KC606CA

LZX749EKC606 LZX801KA606LZX801KA606SS

LZX940KC606 LZX980KC606

LZX940KC726LZX980KC726

LZDS902K605 LZDS902K725 NV640KCNV740KC

NV730EKC CD42CD CD48CD VT541KA363CAVT541KA363

VT651KA484 VT691KA484CA VT691KA524 VT691KA524CA

VT730EKC524 VT740EVC604

25242424

*LZX801KA606SS, LZX940KC606, LZX940KC724, LZX980KC606, and LZX980EKC726 have a suspension seat.•EFI unit

ECS CONTROLS

Let’s face it, the comfort of the operator’s hands isn’t the fi rst thing you think of when you think walk-behinds. But we couldn’t forget about the hands, considering,

in this case, they do just as much work as the operator’s legs and feet.

EASY ON THE HANDS.Our patented Enhanced Control System (ECS) walk-behinds

place the handles where your hands naturally fall, which also

helps protect them from hitting objects that stick out.

The shorter grip distance and drive levers relieve fatigue

while the cushioned handles reduce vibration. It’s total

comfort for hard-working hands.

EC

S C

ON

TRO

LS

EC

S C

ON

TRO

LS

27262626

COMMERCIAL 21

EXPECT BIG THINGS FROM THIS COMPACT MOWER.

Don’t let its smaller size fool you. The Commercial 21 is a

heavy-duty, full-feature trim and fi nish mower. It’s built to

last and it delivers Exmark’s signature quality cut quickly

and effi ciently. Its simple design means that it has fewer

parts, resulting in reduced maintenance, fewer failures and

absolutely no grease points. Even its height adjustment

function is simple, eliminating the need for pivot-style

adjusters. And as for the bagger, it’s easy to take off and put

on, doing away with levers and headaches. That translates

to less time emptying and more time mowing.

MODELS INCLUDE:

Commercial 21 S-Series

Commercial 21 X-Series

See pages 52 and 53 for Commercial 21 specs.

WA

LK-B

EH

IND

S

WA

LK-B

EH

IND

S

BAGGER:Easy to remove and easy to put back on, the bagger eliminates the need for levers and reduces headaches. It allows you to quickly empty it and get back to the job at hand.

HEIGHT ADJUST:The mower’s innovative and durable front height adjust means there are no pivot-style adjusters to deal with.

FRAME:With 60% fewer parts than anything in its class, you can expect less downtime and a lot more mowing time. And with absolutely no grease points, maintenance becomes less of a concern.

redesigned handle mount improves ergonomics

multipurpose blade allows for cutting fl exibility

infi nitely variable drive speeds for more control

automotive-grade polymer wheels for increased reliability

A

B

C

D

DCBA

height adjust means there are no pivot-style

points, maintenance becomes less of a concern.

29282828

ECS: Exmark’s patented Enhanced Control System comes standard on many wide-area walk-behinds. It lessens fatigue and provides greater comfort to the operator’s hands, arms and back.

DRIVE BELT: The drive belt is designed to be hassle-free. It can be easily and quickly changed without the need for a single tool.

DRIVE TIRES: The drive tires provide unmatched stability and maneuverability, giving you the freedom to move over uneven terrain with incredible ease.

WIDE-AREA WALK-BEHINDS

GOOD NEWS: YOUR SEARCH FOR THE BEST

WALK-BEHIND JUST ENDED.

Large properties. Small properties. Tight spaces. Ornate

landscaping. Whether you’re looking for a large walk-

behind with all of the bells and whistles or something a

bit more modest, this is the family to turn to. All Exmark

walk-behinds are designed to be incredibly productive,

delivering a one-of-a-kind cut with each pass. These

machines are built to last, taking on the toughest mowing

conditions without breaking a sweat. They’ll have you easily

maneuvering on hillsides, around fl ower beds, and anything

else that can end up on the lawn.

MODELS INCLUDE:

Metro®

Viking™

Turf Tracer® S-Series

Turf Tracer X-Series

•EFI units available •Propane units available

See pages 55 to 58 for wide-area walk-behind specs.

WA

LK-B

EH

IND

S

WA

LK-B

EH

IND

S

A B

ECS lessens fatigue and provides greater comfort

drive belt service requires no tools

superior clipping dispersal with molded discharge chute

smooth-tread semi-pneumatic caster tires reduce repair

A

B

C

D

C D

31303030

WALK-BEHIND MOWERS

SPEC

S

SPEC

S

•EFI unit

•Propane unit

33323232

MODEL NAME Commercial 21 S-Series Commercial 21 X-Series Metro 26 Metro Viking Turf Tracer S-Series Turf Tracer X-SeriesTurf Tracer X-Series Turf Tracer X-Series Decks

DECK SIZE 21” 21” 26” 32” 36” 48” 36” 48” 36” 48” 52” 52” 60”

ENGINE BRAND Kawasaki® KAI Honda® GXV Kawasaki KAI Kawasaki KAI Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Propane Kawasaki V-Twin Kohler® Command™ Kawasaki V-Twin Kohler Command EFI Kawasaki V-Twin Propane

ENGINE MODEL FJ180V GXV160 FJ180V FJ180V FS481V FS481V FS481V FS481V FS600V FS600V FS541V FS600V CV640 ECV650 FX691V FX691V

DECK SYSTEM 0.25"-thick die-cast aluminum • 5"-deep •

Cutting heights 1"– 4.5" in 0.5" increments”

0.25"-thick die-cast aluminum • 5"-deep •

Cutting height 1"– 4.5" in 0.5" increments0.25"-thick die-cast aluminum • Cutting height 1"– 4" in 0.5" increments

Full-fl oating, 5"-deep deck • Cutting height 1"– 4.25" Full-fl oating, 5"-deep deck • Cutting height 1"– 4.25" Full-fl oating, 5"-deep deck • Cutting height 1"– 4.5" UltraCut™ Series 4 • 4"-deep deck • Cutting heights from 1.5"– 5" • Hex-style spindle blade driver • Chain support and transport lock

SPEED 0-4.2 mph 0-4.1 mph 0-6.2 mph 0-6.2 mph 0-6.2 mph 0-6.75 mph

SPEED CONTROL BBC fi ngertip bail control Standard pistol-grip • Available Enhanced Control System (ECS) Enhanced Control Systems (ECS) Enhanced Control System (ECS) Enhanced Control System (ECS)

PTO Lever-actuated blade engagement with blade brake Mechanical blade engagement with blade brake Mechanical blade engagement with blade brake Electromagnetic 200 ft-lbs clutch

DRIVE SYSTEM Hand-push Self-propelled • Rear-wheel gear-driven Self-propelled •

Rear-wheel gear-drivenSingle-belt drive Dual-belt drive Dual Hydro-Gear variable-displacement pumps Dual Hydro-Gear variable-displacement pumps Dual Hydro-Gear variable-displacement pumps

DRIVE TIRES 9" x 2.5" • Semi-pneumatic 9" x 2.5" • Semi-pneumatic 10 x 3-7 • Semi-pneumatic 13 x 5-6 • 4-ply Turf Saver® 13 x 6.5-6 • 4-ply Turf Master® 13 x 6.5-6 • 4-ply Turf Master 16 x 6.5-8 • 4-ply Turf Master 18 x 8.5-8 • 4-ply Turf Master

FRONT CASTER TIRES 9 x 3.5-4 • Smooth-tread • Semi-pneumatic 9 x 3.5-4 • Smooth-tread • Semi-pneumatic 9 x 3.5-4 • Smooth-tread • Semi-pneumatic 11 x 4-5 • Smooth-tread • Semi-pneumatic

PARKING BRAKE Standard brake bands Lever-actuated mechanical compression Lever-actuated mechanical compression Lever-actuated mechanical compression

MODEL ECSKAP21ECSKA21

ECXHN21ECXHNBBC21

ECXKA21 ECXKABBC21

MSKABBC26 MG481KA322P MG481KA362MG481KA362PMG481KA362CA

MG481KA483PMG481KA483MG481KA483CA

VH481KA362 VH481KA362CA

VH481KA483VH481KA483CA

TTS481KA363TTS481KA363CA

TTS481KA483 TTS600KAE483 TTS600PKAE483 TTS541KA523 TTS600KAE523 TTX640KCE TTX650EKCE TTX691KAE TTX691KAECA

TTX691PKAE FMD524 FMD604

ULTRAVAC X-SERIES

ULTRAVAC® S-SERIES 3-BAGGER

CO

LLE

CTI

ON

SYST

EM

S

ULTRAVAC S-SERIES• Quick-attach design enables easy switching

from bagging to side-discharge without tools.• Larger-diameter, smooth-discharge tube

handles volumes of debris with less clogging.• Compact design minimizes trailer space for

easy maneuverability.• Sealed hood reduces dust around engine

and operator.• Three UltraVac 32-gallon (13.4 bushels)

collection bags. Available on select models.• Two UltraVac 32-gallon (8 bushels)

collection bags.

ULTRAVAC X-SERIES• Discharges grass quickly with one simple

motion of the release lever.• UltraVac X-Series commercial-grade steel and

polyethylene hopper with rear-discharge door (7 bushels or 11 bushels).

OEM PARTSExmark parts are engineered to work with every other part to deliver the kind of power and performance required to maximize your productivity. So when you need a part for your Exmark zero-turn or walk-behind, go original.

EXMARK PARTS PLUS®

If a dealer does not have in stock the Exmark part you need, we will have it available to you on the next business day, or the part is free! Our Parts Plus program is just another way to ensure that your machine achieves maximum uptime.†your machine achieves maximum uptime.†your machine achieves maximum uptime.

INDUSTRY-LEADING WARRANTYWhen you purchase an Exmark zero-turn or walk-behind mowing system, you can buy with confidence, because it’s backed by Exmark’s industry-leading warranty.

See your local Exmark dealer for complete warranty details.

† Restrictions apply; please contact your Exmark dealer for further details. Dealer participation is optional. Program not available in Hawaii and Canada.

* Please refer to the engine manufacturer’s warranty statement. We are not authorized to handle warranty adjustments on engines. This warranty only includes the cost of parts and labor.

** Kohler-powered EFI units offer a 3-year commercial warranty.

UNIT TYPE COMMERCIAL WARRANTY CONSUMER WARRANTY

commercial riders & front-mount decks

Lazer Z® DS-Series & Navigator® 2 Years, Limited 2 Years, Limited

WARRANTY EXCEPTIONSBags, Belts and TiresBatteryEngine*

90 Days1 Year, Prorated2 Years**

90 Days1 Year, Prorated2 Years**

Lazer Z X-Series, Lazer Z S-Series & Vantage® 3 Years, Limited 5 Years or 750 Hours, Limited


90 Days1 Year, Prorated2 Years–Kawasaki®

2 Years–Kohler®**

90 Days1 Year, Prorated3 Years–Kawasaki2 Years–Kohler**

Lazer Z E-Series 2 Years Limited 4 Years or 500 Hours, Limited


90 Days1 Year, Prorated2 Years–Kawasaki2 Years–Kohler

90 Days1 Year, Prorated3 Years–Kawasaki2 Years–Kohler

Pioneer® S-Series 2 Years, Limited 4 Years or 500 Hours, Limited


90 Days1 Year, Prorated2 Years


Pioneer E-Series 1 Year, Limited 4 Years or 500 Hours, Limited




Quest® E-Series & Quest S-Series 30 Days, Limited 3 Years, Limited




walk-behinds

Commercial Walk-Behinds (excludes 26" & 21") 2 Years 2 Years

26" & 21" Mowers 1 Year 1 Year

accessoriesAttachments and Accessories (except as noted below) 1 Year, Limited 1 Year, Limited

Striping Roller & Operator-Controlled Discharge 90 Days 90 Days

Quest Attachments and Accessories 30 Days, Limited 1 Year Limited

miscellaneous

Engine*Warranty is covered by engine manufacturer

Warranty is covered by engine manufacturer

Peerless 5-Speed Transmission 2 Years (extended 21 months beyond manufacturer’s warranty of 90 days)

2 Years (extended 21 months beyond manufacturer’s warranty of 90 days)

Bags, Belts and Tires 90 Days 90 Days

Battery 1 Year, Prorated 1 Year, Prorated

(One-time pick-up and delivery allowed)

(One-time pick-up and delivery allowed)

WA

RR

AN

TY

WE’VE GOT YOU COVERED

EQUIPMENT COVERProtect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear-resistant. Its elastic opening provides a secure, snug fit. See dealer for fit-up information.

Two sizes: Small (116-1378) – Fits Quest units.Large (116-1379) – Fits all Lazer Z and Pioneer units. Does not fit 72" units.

AC

CE

SSO

RIE

S

POWER DECK LIFTChange your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48"–72" cutting deck Lazer Z, its electronic motor features Exmark’s signature durability and a low-profile design that leaves plenty of trailer space. (Fits only 2010 model year.)

HELLA® WORK LAMP KITKeep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact and can even take on high-pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

®

RIDINGMOWERS

SEAT ISOLATION SYSTEMReduces operator fatigue with a 3-dimensional, motion-isolation layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits most Lazer Z models.

TRASH CONTAINERConveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and a durable, easy-to-clean mesh receptacle. See dealer for fit-up information.

JACK AND RECEIVERSafely access the underside of your zero-turn mower’s deck. Jack attaches for smooth lift without hassle or strain, thanks to the comfortable, ergonomic design. Built for years of reliability. Fits most Lazers, Vantage, Pioneer and Quest.

See pages 59 to 61 for full specs and fi t-up information.

35343434

ULTRAVAC E-SERIES• Power and durability in one low-cost package. • Commercial-grade, cloth mesh bags with

reinforced bottoms.• Full 8.0-bushel commercial capacity.• 5-blade, 0.25-inch, abrasion-resistant steel

impellers provide the power you’ll need.• Sealed, non-greaseable impeller bearings for

longer life.

NON-POWERED COLLECTION SYSTEMS• Simple, effective design and ease of installation. • Larger-diameter, smooth-bore discharge tubes

for uninterrupted flow from deck to hopper.• Sturdy, large-capacity collection bags.• Durable, injection-molded hood.• Quick-attach deck boot.• Streamlined design enables better trimmability.• Low profile to get under obstacles easier.

NAVIGATOR DUMP TUBSDebris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split and unloaded one tub at a time.

AC

CE

SSO

RIE

S

RIDINGMOWERS

NAVIGATOR® QUICK-HITCH ATTACHMENT SYSTEMThis hitch system replaces the mowing deck and makes it easy to connect and remove attachments. Blower or blade attachments can be utilized from operator controls.

AC

CE

SSO

RIE

S

COMMERCIAL 21 9.5"-DIAMETER WHEELSFor extended cut height, tough terrain or when reduced rolling resistance is needed, this larger-diameter wheel kit improves your productivity.

EXMARK STANDONIncrease productivity while reducing workload with this pull-behind sulky. Uses an innovative QuikMount system, and convenient, spring-loaded latch. Expanded operator deck with foot guard for safer, more comfortable riding.

WALK-BEHIND MOWERS

COMMERCIAL 21 WHEEL WEIGHT KITEnhance your productivity in wet conditions. Each wheel plate weighs 3 pounds to give you excellent performance, even with a full load of grass.

COMMERCIAL 21 DECK WEAR KITProlong the life of your deck in the toughest conditions with this heavy-duty deck wear kit.

3-BUSHEL BAGGERLightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage® and all wide-area walk-behinds.

NAVIGATOR BLADEFeaturing a 48" width, the snow blade can be angled 20° either right or left. It utilizes a ground scraper constructed of carbon steel that is reversible, to double its productivity. Requires Quick-Hitch Attachment System and fits up without tools.

FULL-SUSPENSION SEATDesigned to fit all Lazer Z models, this low-profile, full-suspension seat enhances operator comfort and lumbar support by adjusting to individual weight and preferred seat-back angle.

CUSTOMRIDE™ SYSTEMA great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings to their individual weight and personal preference. Fits all Lazer Z® models.

NAVIGATOR SNOW BLOWER48" in width and constructed of lasting 12- and 16-gauge steel, this heavy-duty, two-stage blower attachment features a high-speed, 4-blade impeller. Blower controls and rotational chute are easily maneuvered from the operator’s seat. Requires Quick-Hitch Attachment System and fits up without tools.

SUN SHADEEasily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water-repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer® models. Does not fit Quest.®Does not fit Quest.®Does not fit Quest.

37363636

12-VOLT POWER ADAPTERConveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

ADDITIONAL RIDING MOWER ACCESSORIES

AC

CE

SSO

RIE

S

WALK-BEHIND MOWERS

WALK-BEHIND WEIGHT SETAdd weight to the front end of your Exmark walk-behind. Enhance stability and control when using Exmark StandOn. Comes in pairs. Each weighs 9.5 pounds. Excludes Turf Tracer® X-Series.

COMMERCIAL 21 GAS TANKMaximize your mowing with increased fuel capacity. The 1-gallon gas tank fits easily onto your engine to provide optimum productivity. Available for ECSKAP21 and ECSKA21 models.

AC

CE

SSO

RIE

S

HYDRO MAINTENANCE KITKit includes:• 4 bottles Exmark Premium hydraulic oil• 1 belt• 2 hydro filters

EXMARK PREMIUM ENGINE OILUsing a synthetic formulation that is far more stable and robust than inexpensive oil from your local auto parts store or big retail outlet, Exmark premium is the right choice for your mower.

MICRO-MULCH™ SYSTEMThe aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

EXMARK TURF STRIPERAllows you to mow and stripe at the same time. Installs quickly, using existing mounting points. Easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

COMMERCIAL 21 MULCH PLUGEasily transition from bagging to mulching.

COMMERCIAL 21 ENGINE GUARDProtect your engine from impact when mowing around low-hanging branches and other obstacles.

METRO® 26 SIDE-DISCHARGE CHUTEQuickly change from rear-bagging to side-discharge.

METRO 26 MULCH KITEasily transition from bagging to mulching.

OPERATOR-CONTROLLED DISCHARGEThe infinitely adjustable blocker door opens and closes, allowing user to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

EXMARK PREMIUM HYDRO OILDesigned for today’s more demanding hydraulic systems to enhance control performance. Delivers superior anti-wear protection and twice the shear stability of competing oils.

39383838

ALL MOWERS

* Two productivity ratings are shown: one at 100% and one at 80% efficiency. Many manufacturers use 100% efficiency ratings for sales purposes. Exmark believes an 80% efficiency rating is more representative of actual mowing conditions as it allows for turns and overlapping.

Formulas for calculating acres per hour:100% efficiency–MPH x width of cut ÷ 99 = acres per hour | 100% efficiency–MPH x width of cut ÷ 99 = acres per hour | 100% efficiency 80% efficiency–MPH x width of cut ÷ 124 = acres per hour80% efficiency–MPH x width of cut ÷ 124 = acres per hour80% efficiency

RIDER ACRES-PER-HOUR PRODUCTIVITYEfficiency at 100% and 80%*100% and 80%*100%

MPH34" Width 42" Width 48" Width 52" Width 60" Width 66" Width 72" Width

100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80%

1.5 0.52 0.41 0.64 0.51 0.73 0.58 0.79 0.63 0.91 0.73 1.00 0.80 1.09 0.88

2.0 0.69 0.55 0.85 0.68 0.97 0.78 1.05 0.84 1.21 0.97 1.33 1.06 1.45 1.16

2.5 0.86 0.69 1.06 0.85 1.21 0.97 1.31 1.05 1.52 1.21 1.67 1.33 1.83 1.45

3.0 1.03 0.82 1.27 1.02 1.45 1.16 1.58 1.26 1.82 1.45 2.00 1.60 2.19 1.74

3.5 1.20 0.96 1.48 1.19 1.70 1.36 1.84 1.47 2.12 1.70 2.33 1.86 2.54 2.04

4.0 1.37 1.10 1.70 1.35 1.94 1.55 2.10 1.68 2.42 1.94 2.67 2.13 2.90 2.33

5.0 1.72 1.37 2.12 1.69 2.42 1.94 2.63 2.10 3.03 2.42 3.33 2.66 3.64 2.90

6.0 2.06 1.65 2.55 2.03 2.91 2.33 3.15 2.52 3.64 2.91 4.00 3.19 4.37 3.49

7.0 2.40 1.92 2.97 2.37 3.39 2.72 3.68 2.94 4.24 3.40 4.67 3.73 5.05 4.08

8.0 2.75 2.19 3.39 2.71 3.88 3.10 4.20 3.36 4.84 3.88 5.33 4.26 5.80 4.66

8.5 2.92 2.33 3.61 2.88 4.12 3.29 4.46 3.57 5.15 4.11 5.67 4.52 6.18 4.94

9.0 3.09 2.47 3.82 3.05 4.36 3.48 4.73 3.77 5.46 4.35 6.00 4.79 6.53 5.23

9.5 3.26 2.60 4.03 3.22 4.61 3.68 4.99 3.98 5.76 4.59 6.33 5.06 6.90 5.52

10.0 3.43 2.74 4.24 3.39 4.85 3.87 5.25 4.19 6.06 5.00 6.67 5.32 7.27 6.00

11.0 3.78 3.02 4.67 3.73 6.66 5.33 7.33 5.85 8.02 6.42

12.0 4.12 3.29 5.09 4.06 7.27 5.81 8.00 6.39 8.73 6.97

COST OF OWNERSHIP AND PRODUCTIVITY

They’re tough. They’re reliable. They’re efficient. They’re low-maintenance. It’s exactly what you want in your mowers. Exmark mowers are engineered to start

working and stay working, reducing downtime and overall operating expense, which makes them more valuable than their sticker price. And with each passing

year, their value gets even higher.

PRODUCTIVITY AND INCREDIBLE VALUE COME STANDARD.

PR

OD

UC

TIV

ITY

PR

OD

UC

TIV

ITY

LABOR50%

DOWNTIME10%

MAINTENANCE15%

EQUIPMENT16%

FUEL9%

75% of a landscape professional’s mowing costs comprise labor,

downtime and maintenance.

REDUCED COST OF OWNERSHIP

Owning an Exmark increases your profits through:

• Maximized productivity per employee.

• Minimized downtime losses.

• Reduced in-house shop costs.

• Decreased repair costs.

• Increased focus on customer sales and marketing.

• Better retention of strong employees.

• Higher equipment resale value.

EXAMPLE:20% more acres per hour (from 5–6 mph) @ $40.00 per hour = $8.00 per hour.

180 working days per year x 5 hours per day = 900 hours x $8.00.

= $7,200 per year.

20% revenue increase per hour.

As a landscape professional, the investment you make in

original equipment doesn’t impact your bottom line as

much as other operational costs. As a matter of fact, with

Exmark mowers’ high performance and low maintenance,

you’ll be saving time and money in the long run.

41404040

RIDING MOWER SPECIFICATIONSQUEST® E-SERIES

decksSTYLE – Exmark Series-1 stamped steel deck. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 42", 50".

CUTTING HEIGHTS – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.

BLADE-TIP SPEED – Approximately 18,500 fpm.

equipmentTRACTOR FRAME – Unibody, riveted 10-ga. steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers adjust fore and aft.

FRONT CASTER TIRES – 350/410 x 4 smooth-tread, pneumatic (42" model), 13 x 5 ribbed tread, pneumatic (50" model).

DRIVE TIRES – 18 x 7.50-8, 4-ply Turf Tech TL (42" model), 18 x 9.50-8, 4-ply Turf Tech TL (50" model).

TURNING RADIUS – True zero-turn.

PARKING BRAKE – Lever-actuated brake system. Integral to transaxles.

SEAT – High-back foam-padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft 3 in, by loosening 2 bolts and sliding seat (42" model).

Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting, spring suspension, fore and aft adjustment from operator's position (50" model).

power componentsENGINES AVAILABLE – Kawasaki® V-Twin FR651V, FR691V

DRIVE SYSTEM – Two Hydro-Gear® ZT2100 hydrostatic transaxles (42" model). Two Hydro-Gear ZT2200 (50" model).

SPEED – 0–7 mph (11.3 kph) forward, 0–3.4 mph (5.5 kph) reverse.

PTO ENGAGEMENT – MagStop electromagnetic 80-ft-lbs clutch (42" model). MagStop electromagnetic 125-ft-lbs clutch (50" model).

FUEL CAPACITY – 2.9 gallons.FUEL CAPACITY – 2.9 gallons.FUEL CAPACITY

Model Blades Weight Width (defl ector down) Length Height

QTE651KA421 2 Blades at 21.60" 551 lbs. 53.8 in. (136.7 cm) 71.8 in. (182.4 cm) 40.7 in. (103.4 cm)

QTE691KA501 3 Blades at 17.50" 623 lbs. 63 in. (160.0 cm) 72.9 in. (185.2 cm) 42.9 in. (109.0 cm)

RIDING MOWER SPECIFICATIONSQUEST S-SERIES

decksSTYLE – Exmark Series-2 fabricated and welded steel deck. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 50".

CUTTING HEIGHTS – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard foot-operated assist.


equipmentTRACTOR FRAME – Unibody, riveted 10-ga. steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers adjust fore and aft.

FRONT CASTER TIRES – 13 x 5 ribbed tread, pneumatic.

DRIVE TIRES – 20 x 8.0-10, 4-ply Turf Master.


PARKING BRAKE – Lever-actuated brake system. Integral to transaxles.

SEAT – Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting, spring suspension, fore and aft adjustment from operator's position.

power componentsENGINES AVAILABLE – Kawasaki V-Twin FR691V.

DRIVE SYSTEM – Two Hydro-Gear ZT2800 hydrostatic transmissions with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on fi lter and heavy-duty components.

SPEED – 0–7 mph (11.3 kph) forward, 0–3.4 mph (5.5 kph) reverse.

PTO ENGAGEMENT – MagStop electromagnetic 125-ft-lbs clutch.

FUEL CAPACITY – 2.9 gallons.FUEL CAPACITY – 2.9 gallons.FUEL CAPACITY


QTS691KA502 3 Blades at 17.50" 681 lbs. 62.75 in. (159.3 cm) 71.8 in. (182.4 cm) 42.9 in. (109.0 cm)

RID

ER

S

RID

ER

S

43424242

RIDING MOWER SPECIFICATIONSPIONEER® E-SERIES

decksSTYLE – UltraCut™ Series 2. Side discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 48", 52".



equipmentTRACTOR FRAME – Unibody, welded, heavy-duty 2" square tubular steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers, adjustable both fore and aft, and to 2 height positions.

FRONT CASTER TIRES – 3 x 5.0-6, smooth-tread, pneumatic.

DRIVE TIRES – 20 x 8.0-10 Turf Master.®


PARKING BRAKE – Lever-actuated pawl brake.

SEAT – Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting, spring suspension. Fore and aft adjustment from operator's position.

power componentsENGINES AVAILABLE – Kawasaki® V-Twin FR651V FR691V.

DRIVE SYSTEM – Two Hydro-Gear ZT2800 hydrostatic transmissions with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on fi lter and heavy-duty components.

SPEED – 0–7.0 mph (11.3 kph) forward, 0–4.0 mph (6.4 kph) reverse.


FUEL CAPACITY – 7-gallon (26.5L) single fuel tank with single fi ll location.FUEL CAPACITY – 7-gallon (26.5L) single fuel tank with single fi ll location.FUEL CAPACITY


PNE651KA482 3 Blades at 16.25" 799 lbs. 60 in. (152 cm) 78 in. (198 cm) 71 in. (180 cm)

PNE691KA522 3 Blades at 18.00" 805 lbs. 64 in. (163 cm) 78 in. (198 cm) 71 in. (180 cm)

RIDING MOWER SPECIFICATIONSPIONEER S-SERIES

decksSTYLE – UltraCut Series 3. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 44", 48", 52", 60".



equipmentTRACTOR FRAME – Unibody, welded, heavy-duty 2" square tubular steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers, adjustable both fore and aft, and to 2 height positions.

FRONT CASTER TIRES – 13 x 5.0-6, smooth-tread, pneumatic.

DRIVE TIRES – 22 x 9.5-12 Kenda® tires (23 x 10.5-12 Kenda tires on PNS740KC604).


PARKING BRAKE – Lever-actuated pawl brake.

SEAT – Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting, spring suspension. Fore and aft adjustment from operator's position.

power components

ENGINES AVAILABLE – Kawasaki® V-Twin FX600V, FX651V, Kohler® Command™ CV680, CV740.

DRIVE SYSTEM – Two Hydro-Gear ZT3100 (ZT3400 on PNS740KC604) hydrostatic transmissions with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on fi lter and heavy-duty components.

SPEED – 0–8.0 mph (11.3 kph) forward, 0–5.0 mph (6.4 kph) reverse. (0–9.0 mph (14.5 kph) forward, 0–6.0 mph (9.7 kph) reverse on PNS740KC604.


FUEL CAPACITY – 7-gallon (26.5L) single fuel tank with single fi ll location.FUEL CAPACITY – 7-gallon (26.5L) single fuel tank with single fi ll location.FUEL CAPACITY


PNS600KA443 2 Blades at 22.25" 822 lbs. 58 in. (147 cm) 79 in. (201 cm) 72 in. (183 cm)

PNS651KA483 3 Blades at 16.25" 862 lbs. 60 in. (152 cm) 78 in. (198 cm) 72 in. (183 cm)

PNS680KC523 3 Blades at 18.00" 873 lbs. 65 in. (165 cm) 78 in. (198 cm) 72 in. (183 cm)

PNS740KC604 3 Blades at 20.50" 948 lbs. 73 in. (185 cm) 79 in. (200 cm) 72 in. (183 cm)

RID

ER

S

RID

ER

S

45444444

RIDING MOWER SPECIFICATIONS

LAZER Z® E-SERIES

equipmentCUTTING PERFORMANCE – Side discharge with option to bag or mulch.

BLADES – 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.75" (44.5 mm)-diameter splined blade driver.

HYDRO FLUID – Exmark Premium Hydro Oil.

ELECTRICAL SYSTEM – 12-V battery.

ENGINE HOURMETER – Standard.

power componentsDRIVE-WHEEL RELEASE – Allows unit movement without engine running.

SAFETY PACKAGE – Operator Presence Controls (OPC).

ROLLOVER PROTECTION SYSTEM (ROPS) – 2-post foldable ROPS standard with seat belt and latch.

CUP HOLDER – Standard.

DECK LIFT – Standard.

CASTERS – 0.50"-thick, double-yoke, smooth-tread caster wheel assembly with pre-installed bearing cups.

decksSTYLE – Full-fl oating UltraCut™ Series 4. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 48", 52", 60". 10-gauge top that is formed and continuously seam-welded. 7-gauge side skirt with wide-fl ange cutter housings.

CUTTING HEIGHTS – 1.0–4.5" in 0.25" increments, adjustable from the operator’s seat.


equipmentTRACTOR FRAME – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

STEERING & MOTION CONTROL – Hydraulically damped twin levers adjust fore and aft. Adjustable dampers (3 positions) to customize drive responsiveness. Levers are also adjustable to 2 height positions.

FRONT CASTER TIRES – 12 x 5.0-6, smooth-tread, pneumatic. (13 x 5.0-6, smooth-tread, pneumatic on LZE740KC604).

DRIVE TIRES – 22 x 9.5-12 Turf Master.® (23 x 10.5-12 Turf Master on LZE740KC604.)


PARKING BRAKE – Lever-actuated disc brake.

SEAT – High back with adjustment fore and aft.

DIAGNOSTICS – Operational diagnostics with integral fuel gauge.

power componentsENGINES AVAILABLE – Kawasaki® V-Twin - FX600V, FX691V, Kohler® Command™ CV740.

DRIVE SYSTEM – Two Exmark-exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on fi lter and heavy-duty components. 12cc pumps and 14.5-cubic-inch motors.

SPEED – Infi nitely variable speed selection from 0–8 mph forward, 0–6 mph reverse.

PTO ENGAGEMENT – MagStop electromagnetic 175 ft-lbs clutch with spot brake. (200 ft-lbs on LZE740KC604).

FUEL CAPACITY – 8-gallon, single fuel tank with single fi ll location.FUEL CAPACITY – 8-gallon, single fuel tank with single fi ll location.FUEL CAPACITY


LZE600KA484 3 Blades at 16.25" 1035 lbs. 59.6 in. (151.4 cm) 79.2 in. (201.2 cm) 69.5 in. (176.5 cm)

LZE691KA524 3 Blades at 18.00" 1070 lbs. 64.8 in. (164.6 cm) 79.2 in. (201.2 cm) 69.5 in. (176.5 cm)

LZE740KC604 3 Blades at 20.50" 1105 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 69.5 in. (176.5 cm)

RIDING MOWER SPECIFICATIONSLAZER Z S-SERIES

decksSTYLE – Full-fl oating UltraCut Series 4. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 48", 52", 60", 72". 10-gauge top that is formed and continuously seam- welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension, full-fl oating deck, 4 adjustable anti-scalp rollers.

CUTTING HEIGHTS – 1.0 - 5.5" in 0.25" increments, adjustable from the operator’s seat.




FRONT CASTER TIRES – 13 x 5.0-6, smooth tread, pneumatic, on 48" and 52" units (and LZS801PKA604, LZS801PK724, LZS730EKC604). 13 x 6.5-6, smooth-tread, pneumatic, on 60" and 72" units (except LZS801PKA604, LZS730EKC604 and LZS801PKA724).

DRIVE TIRES – 23 x 9.5-12 Turf Master on 48" and 52" units. 24 x 12-12 Turf Master on 60" and 72" units.



SEAT – Deluxe, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material.


power componentsENGINES AVAILABLE – Kohler Command CV680, CV740; Kawasaki V-Twin FX651V, FX801V, FX691V; Kohler Electronic Fuel Injection ECV730, ECV749.

DRIVE SYSTEM – Two Exmark-exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on fi lter and heavy-duty components. 12cc pumps and 14.5-cubic-inch motors. Integrated shock valves on 60" and 72" units.


PTO ENGAGEMENT – MagStop electromagnetic 200-ft-lbs clutch with spot brake.

FUEL CAPACITY – High-capacity, 12-gallon, single fuel tank with single fi ll location (except FUEL CAPACITY – High-capacity, 12-gallon, single fuel tank with single fi ll location (except FUEL CAPACITYLZS730EKC604). 8-gallon, single fuel tank with single fi ll location on LZS730EKC604. 10.3-gallon (43.5 lbs) propane tank on LZS801PKA724.


LZS651KA484 3 Blades at 16.25" 1089 59.6 in. (151.4 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)

LZS651KA484CA 3 Blades at 16.25" 1089 lbs. 59.6 in. (151.4 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)

LZS680KC524 3 Blades at 18.00" 1088 lbs. 64.8 in. (164.6 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)


LZS691KA524CA 3 Blades at 18.00" 1088 lbs. 64.8 in. (164.6 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm)

LZS730EKC604 3 Blades at 20.50" 1133 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70 in. (177.8 cm)


LZS740KC604CA 3 Blades at 20.50" 1133 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70 in. (177.8 cm)

LZS801PKA604 3 Blades at 20.50" 1316 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZS749EKC724 3 Blades at 24.50" 1208 lbs. 84.9 in. (215.6 cm) 86.1 in. (218.7 cm) 70 in. (177.8 cm)

LZS801KA724 3 Blades at 24.50" 1208 lbs. 84.9 in. (215.6 cm) 86.1 in. (218.7 cm) 70 in. (177.8 cm)

LZS801PKA724 3 Blades at 18.00" 1403 lbs. 84.9 in. (215.6 cm) 86.1 in. (218.7 cm) 70.5 in. (179.1 cm)

RID

ER

S

RID

ER

S

47464646

RIDING MOWER SPECIFICATIONSLAZER Z® X-SERIES

decksSTYLE – Full-fl oating UltraCut™ Series 6 with heavy-duty spindle. Side-discharge standard with the option to bag or mulch.

WIDTHS AVAILABLE – 48", 52", 60", 72". 10-gauge top that is formed and continuously seam- welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.

CUTTING HEIGHTS – 1.0-5.5" in 0.25" increments adjustable from the operator's seat.




FRONT CASTER TIRES – 13 x 5.0-6, smooth-tread, semi-pneumatic tires (48" and 52" models);13 x 6.5-6, smooth-tread, semi-pneumatic tires (60" and 72" models).

DRIVE TIRES – 24 x 9.5-12, 4-ply Multi-Trac® (48" and 52" models); 24 x 12.0-12, 4-ply Multi-Trac (60" and 72" models).



SEAT – Deluxe, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material. Innovative Seat Isolation System (SIS) that provides operator isolation in all three planes of motion Fore and aft adjustment from operator's position with seat fl ip-up. Suspension seat standard on LZX801KA606SS, LZX940KC606, LZX940KC726, LXZ980KC606 and LZX980KC726.


power componentsENGINES AVAILABLE – Kawasaki V-Twin FX801V, Kohler Command V-Twin CV680, CV740, CV940, CV980, Kohler Electronic Fuel Injection - ECV749.

DRIVE SYSTEM – Two Exmark-exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on fi lter and heavy-duty components. 12cc pumps and 14.5-cubic-inch motors (48" and 52" models). 16cc pumps and 17.1-cubic-inch motors with integrated shock valve (60" and 72").

SPEED – Infi nitely variable speed selection from 0–10.0 mph forward, 0–6.0 mph reverse (48" and 52" models); 0–11.5 mph forward, 0–7 mph reverse (60" and 72" models).

PTO ENGAGEMENT – 200-ft-lbs on all models with engines up to FX801V up to 250-ft-lbs on all models with CV940 and CV980.

FUEL CAPACITY - High-capacity, 12-gallon, single fuel tank with single fi ll location.FUEL CAPACITY - High-capacity, 12-gallon, single fuel tank with single fi ll location.FUEL CAPACITY


LZX680KC486 3 Blades at 16.25" 1125 lbs. 59.6 in. (151.4 cm) 79.2 in. (201.2 cm) 70.5 in. (179.1 cm)



LZX740KC606CA 3 Blades at 20.50" 1200 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX749EKC606 3 Blades at 20.50" 1212 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX801KA606 3 Blades at 20.50" 1212 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)

LZX801KA606SS 3 Blades at 20.50" 1212 lbs. 72.8 in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm)




RIDING MOWER SPECIFICATIONSLAZER Z DS-SERIES

decksSTYLE – Series 5 high-capacity cutting platform. Side-discharge standard with option to bag or mulch.

WIDTHS AVAILABLE – 60" and 72". 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 6" deep, 4-point suspension, full-fl oating platform with 6 adjustable cone-shaped anti-scalp rollers.

CUTTING HEIGHTS – 1.0" (2.5 cm) to 5" (12.7 cm) in 0.25" (0.64 cm) increments and adjustable from operator's seat.

equipmentTRACTOR FRAME – Welded, heavy-duty tubular steel.

STEERING & MOTION CONTROL – Hydraulically dampened twin levers adjust fore and aft. Levers are also adjustable to 2 height positions.

FRONT CASTER TIRES – 13 x 6.50-6, smooth-tread, semi-pneumatic tires.

DRIVE TIRES – 26 x 12-12, 4-ply MultiTrac.


PARKING BRAKE – Lever-actuated drum and band integrated with transmission-neutral interlock.

SEAT – Hinge-mounted, deluxe, two-tone, bolstered, full-suspension seat with Elastomeric Vibration Control (EVC) material. Adjusts to individual operator weight and features padded, height-adjustable armrests.

power componentsENGINES AVAILABLE – Kubota 3-cylinder liquid-cooled diesel D902.

DRIVE SYSTEM – Two Hydro-Gear 21cc pumps with integral SCR (System Check Relief) valves (in forward), powering two 18-cubic-inch wheel motors with 1.25" (3.18 cm)-diameter tapered shafts.

SPEED – Infi nitely variable speed selection from 0–12 mph (19.3 kph) forward, 0–8.0 mph (12.9 kph) reverse.

PTO ENGAGEMENT – MagStop electromagnetic 250-ft-lbs clutch with spot brake.

FUEL CAPACITY – 15.5-gal. (58.7-L) twin fuel tanks.FUEL CAPACITY – 15.5-gal. (58.7-L) twin fuel tanks.FUEL CAPACITY


LZDS902K605 3 Blades at 20.75" 1602 lbs. 72.8 in. (184.9 cm) 84.5 in. (214.6 cm) 72.7 in. (184.7 cm)

LZDS902K725 3 Blades at 24.75" 1702 lbs. 85.8 in. (217.9 cm) 88.7 in. (225.3 cm) 72.7 in. (184.7 cm)

RID

ER

S

RID

ER

S

49484848

RIDING MOWER SPECIFICATIONS

decksSTYLE – UltraCut™ Series 4. Side-discharge standard with the option to bag or mulch. (Series 3 on VT541KA363 and VT541KA363CA.)

WIDTHS AVAILABLE – 36", 48", 52", 60". 10-gauge top that is formed and continuously seam- welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension with mechanical spring deck lift.

CUTTING HEIGHTS – 1.0–5.0" in 0.25" increments adjustable from the operator's position.


equipmentTRACTOR FRAME – Welded, heavy-duty 1.5" x 3" tubular steel.

SUSPENSION PLATFORM – Self-compensating elastomer suspension. Stowable operator platform.

STEERING & MOTION CONTROL – Twin levers with no-tools adjustable front reference bar to modify forward ground speed.

FRONT CASTER TIRES – 11 x 4-5, smooth-tread, semi-pneumatic tires.

DRIVE TIRES – 20 x 10-8 Turf Master® drive tires. (18 x 8.5-8 Kenda® Tires on VT541KA363 and T541KA363CA).


PARKING BRAKE – Lever-actuated bar brake.

power components

ENGINES AVAILABLE – Kawasaki® V-Twin FS541V, FS651V, FS691V, and Kohler Electronic Fuel Injection ECV730, ECV740.

DRIVE SYSTEM – Two Hydro-Gear 10cc pumps powering two Parker 12-cubic-inch motors.


PTO ENGAGEMENT – 175-ft-lbs clutch (200-ft-lbs clutch on 60" model).

FUEL CAPACITY – 8-gallon, single fuel tank with single fi ll location.FUEL CAPACITY – 8-gallon, single fuel tank with single fi ll location.FUEL CAPACITY

Model Blades Weight Width (defl ector down) Length (platform up) Height Length (platform down)

VT541KA363 2 Blades at 18" 790 lbs. 48.0 in. (121.9 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT541KA363CA 2 Blades at 18" 790 lbs. 48.0 in. (121.9 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT651KA484 3 Blades at 16.25" 855 lbs. 59.6 in. (151.4 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT691KA484CA 3 Blades at 16.25" 855 lbs. 59.6 in. (151.4 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT691KA524 3 Blades at 18" 866 lbs. 64.8 in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT691KA524CA 3 Blades at 18" 866 lbs. 64.8 in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT730EKC524 3 Blades at 18" 875 lbs. 64.8 in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm)

VT740EKC604 3 Blades at 20.50" 883 lbs. 72.8 in. (184.9 cm) 62.5 in. (159 cm) 50 in. (127 cm) 76 in. (193 cm)

equipmentCUTTING PERFORMANCE – Side-discharge with option to bag or mulch.

BLADES – 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.75" (44.5 mm)-diameter splined blade driver.

HYDRO FLUID – Exmark Premium Hydro Oil.

ELECTRICAL SYSTEM – 12-V battery.


power componentsDRIVE-WHEEL RELEASE – Allows unit movement without engine running.



VANTAGE®

RIDING MOWER SPECIFICATIONSNAVIGATOR®

decksSTYLE – Full-fl oating rear-discharge cutting deck with heavy-duty gear-driven spindle assembly. Patented fi ll reduction baffl es standard.

WIDTHS AVAILABLE – 42" and 48". 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 0.1875" wear guard is welded to entire base of deck. 7-gauge deck spindle supports. 0.25" thick strap-iron deck supports.

CUTTING HEIGHTS – 1.0" (2.5 cm) to 4" (10.2 cm).

equipmentTRACTOR FRAME – Channeled and fully welded 1.5" x 1.5" x 0.1875" wall tubing with ground clearance of 4.0", strategically located, continuous-force counterweight springs.

STEERING & MOTION CONTROL – FeatherTouch hand-control drive levers. Low-force constant-speed lever.

FRONT CASTER TIRES – 8.0 x 3-4 semi-pneumatic.

DRIVE TIRES – 18 x 10.50-10 MultiTrac® C/S.


power componentsENGINES AVAILABLE – Kohler® Command™ CV640, ECV730, CV740.

DRIVE SYSTEM – Dual Hydro-Gear® PJ 12cc variable-displacement pumps power in-wheel planetary gear reduction motors.

SPEED – Infi nitely variable speed selection from 0–7 mph (11.3 kph) forward, 0–5.5 mph (8.9 kph) reverse.

FUEL CAPACITY – 7.5-gallon pivoting tank for easier engine service.FUEL CAPACITY – 7.5-gallon pivoting tank for easier engine service.FUEL CAPACITY


NV640KC 845 lbs. 42.6 in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm)

NV730EKC 850 lbs. 42.6 in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm)

NV740KC 850 lbs. 42.6 in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm)

CD42CD 2 Blades at 22" 325 lbs. 43.2 in. (109.7 cm) 37.2 in. (94.5 cm) 13.1 in. (33.3 cm)

CD48CD 2 Blades at 25" 295 lbs. 49.2 in. (125.0 cm) 39.9 in. (101.3 cm) 13.1 in. (33.3 cm)

RID

ER

S

RID

ER

S

51505050

WALK-BEHIND MOWER SPECIFICATIONSCOMMERCIAL 21 S-SERIES

decksSTYLE – Side-discharge bagger and mulch plug standard, with option to rear-discharge.

WIDTHS AVAILABLE – 21" (53.3 cm).

CUTTING HEIGHTS – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3cm) increments.

BLADES – 0.135"-thick (3.4 cm) alloy steel.


equipment

ENGINE DECK – 5"-deep, 0.25"-thick die-cast aluminum.ENGINE DECK – 5"-deep, 0.25"-thick die-cast aluminum.ENGINE DECK

DRIVE TIRES – 9" x 2.5", semi-pneumatic.

BAG CAPACITY – 2.5 bushels (20 gallons).BAG CAPACITY – 2.5 bushels (20 gallons).BAG CAPACITY

SAFETY PACKAGE – Zone start.

power components

ENGINES AVAILABLE – Kawasaki® FJ180V KAI (180cc).

DRIVE SYSTEM – Rear-wheel gear-driven. (ECSKAP21—Push only.)

TRANSMISSION – Infi nitely variable speed selection.

SPEED CONTROL – Fingertip control.

SPEED – 0.0 mph to 4.2 mph (6.6 kph) forward.

FUEL CAPACITY – 2-quart integral fuel tank.FUEL CAPACITY – 2-quart integral fuel tank.FUEL CAPACITY


ECSKAP21 1 Blade at 20.5" 107 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

ECSKA21 1 Blade at 20.5" 112 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

WALK-BEHIND MOWER SPECIFICATIONSCOMMERCIAL 21 X-SERIES

decksSTYLE – Side-discharge bagger and mulch plug standard, with option to rear-discharge.

WIDTHS AVAILABLE – 21" (53.3 cm).


BLADES – 0.135"-thick (3.4 cm) alloy steel.


equipment

ENGINE DECK – 5"-deep, 0.25"-thick die-cast aluminum.ENGINE DECK – 5"-deep, 0.25"-thick die-cast aluminum.ENGINE DECK

DRIVE TIRES – 9" x 2.5", semi-pneumatic.

BAG CAPACITY – 2.5 bushels (20 gallons).BAG CAPACITY – 2.5 bushels (20 gallons).BAG CAPACITY

SAFETY PACKAGE – Zone start.

power components

ENGINES AVAILABLE – Kawasaki FJ180V KAI (180cc) or Honda® GXV (160cc). All models CARB-compliant.

DRIVE SYSTEM – Rear-wheel gear-driven.

TRANSMISSION – Infi nitely variable speed selection.

SPEED CONTROL – Fingertip control.

SPEED – 0.0 mph to 4.2 mph (6.6 kph) forward.

FUEL CAPACITY –1-gallon integral fuel tank.FUEL CAPACITY –1-gallon integral fuel tank.FUEL CAPACITY


ECXKA21 1 Blade at 20.5" 114 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

ECXHN21 1 Blade at 20.5" 112 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

ECXHNBBC21 1 Blade at 20.5" 117 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

ECXKABBC21 1 Blade at 20.5" 115 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm)

WA

LK-B

EH

IND

S

WA

LK-B

EH

IND

S

53525252

WALK-BEHIND MOWER SPECIFICATIONSMETRO® 26

decksSTYLE – Rear-discharge bagger standard with option to side-discharge or mulch.

WIDTHS AVAILABLE – 26" (66 cm).



BLADES – 1-0.156" (3.96 mm) thick alloy steel.

BLADE SPINDLES – 1.0" (25.4 mm)-diameter, hardened steel.

equipment

ENGINE DECK – Die-cast aluminum.ENGINE DECK – Die-cast aluminum.ENGINE DECK

DRIVE TIRES – 10 x 3-7, semi-pneumatic with die-cast aluminum rims with bearing assembly.

FRONT TIRES – 8 x 2-6, semi-pneumatic with die-cast aluminum rims with bearing assembly.

BAG CAPACITY – 3 bushels (24 gallon).BAG CAPACITY – 3 bushels (24 gallon).BAG CAPACITY

SAFETY PACKAGE – Zone start/Blade Brake Clutch (BBC).

power components

ENGINES AVAILABLE – Kawasaki® FJ180V KAI (180cc).

DRIVE SYSTEM – Self-propelled rear-wheel gear-drive.

TRANSMISSION – 3-speed.

SPEED CONTROL – Finger-tip bail controls, infi nitely variable.

SPEED – 2.0 mph (3.2 kph) to 4.1 mph (6.6 kph) forward.

FUEL CAPACITY – 1-gallon (3.79-L).FUEL CAPACITY – 1-gallon (3.79-L).FUEL CAPACITY


MSKABBC26 1 Blade at 26.10" 151 lbs. 27.7 in. (68.6 cm) 69.0 in. (175.3 cm) 44.0 in. (111.8 cm)

WALK-BEHIND MOWER SPECIFICATIONSMETRO

decksSTYLE – Fixed-deck, side-discharge standard, with molded discharge chute and option to bag or mulch. Series 3 (32" and 36"), Series 4 (48").

WIDTHS AVAILABLE – 32" (81.3 cm), 36" (91.4 cm), 48" (121.9 cm).


BLADES – Excalibur™ 0.20"-thick (5.1 mm) alloy steel.

BLADE SPINDLES – 1.0" (25.4 mm) diameter.


equipment

ENGINE DECK – 7-gauge welded steel.ENGINE DECK – 7-gauge welded steel.ENGINE DECK

STEERING & MOTION CONTROL – Pistol-grip or Enhanced Control System (ECS).

TURNING RADIUS – Zero-turn around center of inside tire.

FRONT CASTER TIRES – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.

DRIVE TIRES – 32": 13 x 5.0-6, 4-ply Turf Saver®; 36" and 48": 13 x 6.5-8, 4-ply Turf Master.®; 36" and 48": 13 x 6.5-8, 4-ply Turf Master.®; 36" and 48": 13 x 6.5-8, 4-ply Turf Master.


power componentsENGINES AVAILABLE – Kawasaki V-Twin FS481V.

DRIVE SYSTEM – Direct drive from transmission to double-belt wheel drives (single-belt on 32").

TRANSMISSION – 5-speed Peerless 700-070A.

SPEED CONTROL – Padded shift lever.

SPEED – 2.0 mph (3.2 kph) to 6.2 mph (10.0 kph) forward, reverse assist.

FUEL CAPACITY – 5-gallon (18.9-L) fuel tank.FUEL CAPACITY – 5-gallon (18.9-L) fuel tank.FUEL CAPACITY


MG481KA322P 2 Blades at 16.25" 421 lbs. 43.3 in. (110.0 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm)


MG481KA362 2 Blades at 18.00" 451 lbs. 47.0 in. (119.4 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm)


MG481KA483 3 Blades at 16.25" 501 lbs. 57.9 in. (147.1 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm)

MG481KA362CA 2 Blades at 18.00" 456 lbs. 47.0 in. (119.4 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm)

MG481KA483CA 3 Blades at 16.25" 506 lbs. 57.9 in. (147.1 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm)

WA

LK-B

EH

IND

S

WA

LK-B

EH

IND

S

55545454

WALK-BEHIND MOWER SPECIFICATIONSVIKING™

decksSTYLE – Fixed-deck, side-discharge standard, with molded discharge chute and option to bag or mulch. Series 3 (36"), Series 4 (48").

WIDTHS AVAILABLE – 36" (91.4 cm), 48" (121.9 cm).





equipmentFRONT CASTER TIRES – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.

DRIVE TIRES – 16 x 6.5-8, 4-ply Turf Master.®

power components

ENGINES AVAILABLE – Kawasaki® V-Twin FS481V.

PTO ENGAGEMENT – Mechanical blade engagement with blade brake.


VH481KA362 2 Blades at 18.00" 481 lbs. 47.0 in. (119.4 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm)

VH481KA362CA 2 Blades at 18.00" 486 lbs. 47.0 in. (119.4 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm)

VH481KA483 3 Blades at 16.25" 531 lbs. 57.9 in. (147.1 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm)

VH481KA483CA 2 Blades at 18.00" 536 lbs. 57.9 in. (147.1 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm)

WALK-BEHIND MOWER SPECIFICATIONS

TURF TRACER® S-SERIES

decksSTYLE – Full-fl oating, side-discharge standard, with molded discharge chute and option to bag or mulch.

WIDTHS AVAILABLE – 36" (91.4 cm), 48" (121.9 cm), 52" (132 cm).


BLADES – Excalibur 0.20"-thick (5.1 mm) alloy steel.



equipmentFRONT CASTER TIRES – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.

DRIVE TIRES – 36": 16 x 6.5-8, 4-ply Turf Master®; 48", 52": 16 x 735-8, 4-ply Turf Master.

power components

ENGINES AVAILABLE – Kawasaki® V-Twin FS481V, FS541V, FS600V.

PTO ENGAGEMENT – Mechanical blade engagement with blade brake.

ELECTRICAL SYSTEM – 12-V battery, 15-amp alternator (only on electric-start models).


TTS481KA363 2 Blades at 18.00" 569 lbs. 46.7 in. (118.6 cm) 77.7 in. (197.4 cm) 42.0 in. (106.7 cm)

TTS481KA363CA 2 Blades at 18.00" 574 lbs. 46.7 in. (118.6 cm) 77.7 in. (197.4 cm) 42.0 in. (106.7 cm)

TTS600KAE483 3 Blades at 16.25" 621 lbs. 57.9 in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm)


TTS541KA483CA 3 Blades at 16.25" 626 lbs. 57.9 in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm)

TTS600PKAE483 3 Blades at 16.25" 689 lbs. 57.9 in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm)


TTS600KAE523 3 Blades at 18.00" 659 lbs. 63.5 in. (161.3 cm) 75.9 in. (192.8 cm) 42.0 in. (106.7 cm)

equipmentENGINE DECK – 7-gauge, heavy-duty, welded steel.ENGINE DECK – 7-gauge, heavy-duty, welded steel.ENGINE DECK

STEERING & MOTION CONTROL – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.

TRACKING ADJUSTMENT – Insta-Track.

DRIVE-WHEEL RELEASE – Easy-access dump valves, with engine on or off.



PARKING BRAKE – Standard mechanical compression.

DRIVE SYSTEM – Two Hydro-Gear variable-displacement pumps and twin high-effi ciency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.

SPEED – Turf Tracer® S-Series has infi nitely variable selection from 0–6.2 mph (10 kph) forward, 0–2.2 mph (3.5 kph) reverse.


LUBRICATION – Synthetic oil with continuous fi ltration of hydro oil.

power components

DRIVE-WHEEL RELEASE – Allows unit movement without engine running.



WA

LK-B

EH

IND

S

WA

LK-B

EH

IND

S

57565656

WALK-BEHIND MOWER SPECIFICATIONS

TURF TRACER® X-SERIES

decksSTYLE – Full-fl oating UltraCut™ Series 4. Side-discharge standard, with molded discharge chute and option to bag or mulch.

WIDTHS AVAILABLE – 52" (132 cm), 60" (152.4 cm).

CUTTING HEIGHTS – 1.5" (3.8 cm) to 4.5 (11.4 cm) in 0.5" (1.3 cm) increments.




equipmentFRONT CASTER TIRES – Double-yoke, semi-pneumatic, 11 x 4.0-5, smooth-tread.

DRIVE TIRES – 18 x 8.5-8, 4-ply Turf Master.®

power components

ENGINES AVAILABLE – Kohler® Command™ CV640; Kawasaki® V-Twin FX691V; Kohler Command EFI ECV650.

PTO ENGAGEMENT – Electromagnetic 200-ft-lbs clutch.

ELECTRICAL SYSTEM – 12-V battery, 15-amp alternator.



TTX640KCE N/A 439 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

TTX650EKCE N/A 439 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

TTX691KAE N/A 762 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

TTX691KAECA N/A 434 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

TTX691PKAE N/A 448 lbs. 85.4 in. (216.9 cm) 45.0 in. (114.3 cm)

FMD524 3 Blades at 18" 292 lbs. 64.0 in. (162.6 cm)

FMD604 3 Blades at 20.5" 333 lbs. 72.0 in. (182.9 cm)

equipmentENGINE DECK – 7-gauge, heavy-duty, welded steel.ENGINE DECK – 7-gauge, heavy-duty, welded steel.ENGINE DECK

STEERING & MOTION CONTROL – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.

TRACKING ADJUSTMENT – Insta-Track.

DRIVE-WHEEL RELEASE – Easy-access dump valves, with engine on or off.



PARKING BRAKE – Standard mechanical compression.

DRIVE SYSTEM – Twin Hydro-Gear variable-displacement pumps and twin high-effi ciency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.

SPEED – 0-6.75 mph (10.9 kmph) forward, 0-2.25 mph (3.6 kmph) reverse.


LUBRICATION – Synthetic oil with continuous fi ltration of hydro oil.

power components

DRIVE-WHEEL RELEASE – Allows unit movement without engine running.



ULTRAVAC® SPECIFICATIONSS-SERIES 2-BAGGER FOR ALL 48" AND 52" LAZER Z MODELS

S-SERIES 3-BAGGER FOR ALL FULL-SIZE 60" AND 72" LAZER Z MODELS

COLLECTION BAGS – Two commercial-grade, cloth mesh bags with reinforced bottoms.

TOTAL COLLECTION CAPACITY – 8 bushels (64 gallons).TOTAL COLLECTION CAPACITY – 8 bushels (64 gallons).TOTAL COLLECTION CAPACITY

DUMP MECHANISM – Manual lift-off.

BLOWER TUBE – Fixed, abrasion-resistant polyethylene.

IMPELLER – 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel with vertical axis.

IMPELLER AXIS – Vertical.

IMPELLER HOUSING – 0.187"-thick, abrasion-resistant steel.

BEARINGS – 1" (2.54 cm) sealed non-greasable bearings.

COLLECTION BAGS – Three commercial-grade, cloth mesh bags with reinforced bottoms.

TOTAL COLLECTION CAPACITY – 13.4 bushels (107.2 gallons).TOTAL COLLECTION CAPACITY – 13.4 bushels (107.2 gallons).TOTAL COLLECTION CAPACITY


BLOWER TUBE – 7.75"-diameter, fi xed, abrasion-resistant polyethylene.

IMPELLER – 5-bladed, abrasion-resistant steel, 15.0" diameter.


IMPELLER HOUSING – 0.187"-thick abrasion-resistant steel.


LZ E-Series 48" LZ E-Series 52" LZ S & X-Series 48" LZ S & X-Series 52"

Overall Unit Length with Bagger 102.25" (259.7 cm) 102.25" (259.7 cm) 102.25" (259.7 cm) 102.25" (259.7 cm)

Overall Unit Width with Bagger 62.50" (158.8 cm) 67.75" (172.1 cm) 62.50" (158.8 cm) 67.75" (172.1 cm)

Total Bagging System Weight 266 lbs. (120 kg) 266 lbs. (120 kg) 309 lbs. (140 kg) 309 lbs. (140 kg)

LZ S & X-Series 60" LZ S & X-Series 72" LZ DS-Series 60" LZ DS-Series 72" LZ E-Series 60"

Overall Unit Length with Bagger 107.0" (271.8 cm) 110.0" (279.4 cm) 110.9" (281.6 cm) 115.4" (293 cm) 107.0" (271.8 cm)

Overall Unit Width with Bagger 74.94" (190.3 cm) 87.38" (221.9 cm) 74.94" (190.3 cm) 87.38" (221.9 cm) 74.44" (189.08 cm)

Total Bagging System Weight 449 lbs. (204 kg) 406 lbs. (184 kg) 261 lbs. (118.4 kg) 268 lbs. (122.6 kg) TBD

WA

LK-B

EH

IND

S

CO

LLE

CTI

ON

SYST

EM

S

59585858

ULTRAVAC® SPECIFICATIONSX-SERIES FOR ALL 48" AND 52" LAZER Z MODELS

X-SERIES FOR ALL FULL-SIZE 60" AND 72" LAZER Z MODELS

COLLECTION BAGS – Commercial-grade steel and polyethylene hopper with rear discharge door. Commercial-grade cloth mesh door panel with molded lower wear panel.


DUMP MECHANISM – Single-motion actuation from operator's seat.

BLOWER TUBE – Fixed, abrasion-resistant polyethylene.

IMPELLER – 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel.



BEARINGS – 1" (2.54 cm) sealed, non-greasable bearings.

COLLECTION BAGS – 3 commercial-grade, cloth mesh bags with reinforced bottoms.

TOTAL COLLECTION CAPACITY – 13.4 bushels (107.2 gallons).TOTAL COLLECTION CAPACITY – 13.4 bushels (107.2 gallons).TOTAL COLLECTION CAPACITY


BLOWER TUBE – 7.75"-diameter, fi xed, abrasion-resistant polyethylene.

IMPELLER – 5-bladed, abrasion-resistant steel, 15.0" diameter.




LZ E-Series 48" LZ E-Series 52" LZ S & X-Series 48" LZ S & X-Series 52"

Overall Unit Length with Bagger 102.0" (259.1 cm) 102.0" (259.1 cm) 102.0" (259.1 cm) 102.0" (259.1 cm)

Overall Unit Width with Bagger 62.50" (158.8 cm) 67.75" (172.1 cm) 62.50" (158.8 cm) 67.75" (172.1 cm)


LZ S & X-Series 60" LZ S & X-Series 72" LZ DS-Series 60" LZ DS-Series 72" LZ E-Series 60"

Overall Unit Length with Bagger 106.5" (270.5 cm) 109.5" (286.2 cm) 109.4" (278 cm) 113.9" (289.4 cm) 106.5" (270.5 cm)

Overall Unit Width with Bagger 75.0" (190.5 cm) 87.25" (221.6 cm) 74.9" (190.3 cm) 87.4" (221.9 cm) 75.0" (190.5 cm)

Total Bagging System Weight 477 lbs. (216 kg) 434 lbs. (197 kg) 331 lbs. (150.1 kg) 338 lbs. (153.3 kg) TBD

ULTRAVAC SPECIFICATIONS2-BAGGER OPTION FOR ALL QUEST AND PIONEER S-SERIES MODELS

COLLECTION BAGS – 2 commercial-grade, cloth mesh bags with reinforced bottoms.



BLOWER TUBE – Fixed, abrasion-resistant, molded polyethylene.

IMPELLER – 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel with vertical axis.


IMPELLER HOUSING – 0.187"-thick, abrasion-resistant steel.

BEARINGS – 1" (2.54 cm) sealed, non-greasable bearings.

All Quest and Pioneer S-Series 44" All Quest and Pioneer S-Series 48" All Quest and Pioneer S-Series 52" Pioneer S-Series 60"

Overall Unit Length with Bagger 97" (246 cm) 97" (246 cm) 97" (246 cm) 98.6" (250.5 cm)

Overall Unit Width with Bagger 58" (147 cm) 62" (157 cm) 66" (168 cm) 74" (188 cm)


CO

LLE

CTI

ON

SYST

EM

S

CO

LLE

CTI

ON

SYST

EM

S

61606060

Brand Stories

Exmark Difference ...................................................4

Exmark Commercial Quality ..................................6

Exmark Cutting Technology ..................................8

Riding Mowers

Quest® .....................................................................10

Pioneer® ...................................................................12

Lazer Z® ....................................................................14

Lazer Z DS-Series ...................................................16

Navigator® ...............................................................18

Vantage® ..................................................................20

Mower Charts .........................................................22

Brand Stories

ECS Controls ...........................................................26

Walk-Behind Mowers

Commercial 21........................................................28

Wide-Area Walk-Behinds .....................................30

Mower Charts .........................................................32

Warranty & Cost Benefits.................................34

Accessories & Options

UltraVac® ..................................................................34

Riding Mowers ........................................................35

Walk-Behind Mowers ............................................37

All Mowers...............................................................39

Brand Stories

Cost of Ownership and Productivity ..................40

Specifications

Riding Mowers ........................................................42

Walk-Behind Mowers ............................................52

UltraVac ....................................................................59

IND

EX

INDEX

it comes from the desire to make the - heavy duty … · it comes from the desire to make the ......

Documents