it-100 integration module. it-100 - overview the it-100 features a bi-directional rs-232 interface...
TRANSCRIPT
IT-100Integration Module
IT-100 - Overview
The IT-100 features a bi-directional RS-232 interface that accepts commands and sends event-driven or state-change commands to third-party applications, for example home automation or HVACS system.
IT-100 – Specifications
Current Draw: 65mA
Compatibility: All PowerSeries
Mounting: Inside control panel cabinet or PC5003 cabinet
• Compatible with all PowerSeries control panels• Bi-directional RS-232 interface• Real-time zone status• Fully programmable• 4-wire hook-up to KEYBUS• Enables third parties to perform virtual keypad functions• Enables third parties to perform thermostat control functionality via the DSC Escort module
IT-100 – Features
IT-100 – Sample Configuration
IT-100 – Module Overview
RED, BLK, YEL, GRN: These terminals are used to connect the IT-100 to the Keybus of the control panel.
IT-100 – Module Overview
LED: This LED is used to indicate the current status of the IT-100.
IT-100 – Module Overview
DB9: This connection is used to wire the IT-100 to the third-party application.
Note: a ‘straight-through’ RS-232 is required for this connection
IT-100 – Additional Wiring Information
The IT-100 includes a ferrite. Ensure that it is looped through the keybus (twice) and placed as close to the IT-100 as possible.
IT-100 – LED Information
IT-100 – Baud Rate Selection
Baud Rate Selection: The baud rate of the IT-100 is selectable using a third party applications (default = 9600 baud).
Q&A
IT-100