iso 9001 - cert. n° 0545/3 - ligajos technikafutura serie fst - fan coil units with tangential fan...
TRANSCRIPT
Product Range
Sabiana s.p.a. • via Piave, 53 • 20011 Corbetta • Milano • Italy • phone +39.02.97203.1 r.a. / +39.02.97270429 / +39.02.97270576fax +39.02.9777282 / +39.02.9772820 • www.sabiana.it • [email protected]
ISO 9001 - Cert. n° 0545/3Unit heaters
Radiant panelsFan coils
Air handling unitsFlues
ENVIRONMENTAL COMFORT
ENVIRONMENTAL COMFORT
GP -
E -
03/
08 C
OD. A
4000
100
E/03
/08
Copertina GUIDA Inglese.indd 1 27-02-2008 12:58:06
ENVIRONMENTAL COMFORT ENVIRONMENTAL COMFORT
DUCK STRIP RADIANT PANELS: AEROSPATIALE TOULOUSENEW AIRBUS A380 PRODUCTION PLANT.INSTALLATION HEIGHT: 40 m
DUCK STRIP RADIANT PANELS: AEROSPATIALE TOULOUSENEW AIRBUS A380 PRODUCTION PLANT.
INSTALLATION HEIGHT: 40 m
SKYSTAR FAN COIL UNITS CASSETTE
JANUS 05 AND POLARIS AIR CONDITIONERS
Copertina GUIDA Inglese.indd 2 27-02-2008 12:58:09
Choose SABIANA and you choose safety. Safetyin terms of products, performance and reliability.Safety also means a relationship based on honestyand competence.
For this reason SABIANA has kept for 80 years aleading position in the production of heating andair conditioning equipment for use in industry,trade and sports.
In 1929 SABIANA was founded by Franco Binaghiand Benvenuto Anatrella and began its activitywith the production of heating appliances. Afterhaving brilliantly overcome the war years and the post-war period, the company adapted its range ofproducts to modern requirements, introduced a modernisation and automation program for workingprocedures and dedicated much attention to its most important product, the unit heater so that itcould become a leader in Europe in this market.
In the Seventies SABIANA introduced the radiant strip, which very soon demonstrated its qualities asthe most modern and efficient heating system for large areas. The design and production technologies,which were adopted for the radiant strip, assured that SABIANA became the market leader in Europefor this product.The continuous updating of the product range has progressed with the introduction of the fan-coils,cassettes and air handling units, which satisfy all the needs of air treatment, and of the stainlesssteel flues.
With eighty years of experience and its high reliability SABIANA stands up for its principal purpose:to guarantee to engineers and customers the security of a safe product and of a trustful relationshipwith the supplier. Thanks to this philosophy SABIANA is prepared to accept the challenges of thecoming years.
Sabiana production plant
Choose Sabiana, choose safety
Sabiana, the company
Guida Prodotti Inglese.indd 1 28-02-2008 14:46:19
page 25page 26
page 24
page 11page 11page 12page 12page 13page 14page 15page 15page 16page 17page 18page 19page 20page 21page 22page 23
page 1page 2page 4page 5page 6page 6page 7page 7page 8page 8page 9page 9page 9page 10
InoxSabiana 25/50 - FluesInoxMono Sabiana - Flues
Duck Vap - Vacuum Steam Systems
Polaris - Air ConditionersElegant - Air ConditionersKrio - ChillersJanus 05 - Air ConditionersFutura - Fan Coil UnitsFutura Serie FSC - Fan Coil Units with centrifugal fanFutura Serie FST - Fan Coil Units with tangential fanFutura Serie FSR - Fan Coil Units with tangential fanCrystall FS - Electronic FilterSkyStar - Cassette Fan CoilsMistral - High Wall Fan CoilsSlim - High Pressure Fan Coil UnitsMaestro - High Pressure Fan Coil UnitsOcean - Slim-line Air ConditionersZeus - Air Handling UnitsVulcan Pro - Air Handling Units
Pulsar - Radiant PanelsDuck-Strip - Radiant PanelsAtlas - Unit HeatersHelios - Unit HeatersAtlas STP - Door Curtain UnitsAIX - Stainless Steel Unit HeaterJetstream - Induction Flow OptimizersNo-Strat - Antistratification UnitsMeltemi - Door CurtainsEnergy - Heat Recovery UnitsElectra 90 and Electramatic - Electric Unit HeatersFSE - Electric Fan ConvectorsPrimula - Fan ConvectorsComfort - Circular Unit Heaters
The descriptions and illustrations provided in this publication are not binding: Sabiana reserves the right, whilstmaintaining the essential characteristics of the types described and illustrated, to make, at any time, without therequirement to promptly update this piece of literature, any changes that it considers useful for the purpose ofimprovement or for any other manufacturing or commercial requirements.
Heating
air Conditioning
gas units
Flues
Guida Prodotti Inglese.indd 2 27-02-2008 12:55:12
1112131415
5358636974
9099108117127
71798693100
122134146158171
W/ml W/m2Without insulation
W/ml W/m2With insulation∆TM
°C
COOLING EMISSION
5678910
222832384347
384755647381
303743505764
5263748698110
W/ml W/m2Without insulation
W/ml W/m2With insulation∆TM
°C
COOLING EMISSION
∆tm = difference between the mean water temperature and the room temperature.
29282726252423222120
160153147141134128122116110104
∆TM
°CEMISSION
W/ml39383736353433323130
225218211205198192185179172166
∆TM
°CEMISSION
W/ml49484746454443424140
292285279272265258251245238231
∆TM
°CEMISSION
W/ml59585756555453525150
362355348341334327320313306299
∆TM
°CEMISSION
W/ml69686766656463626160
434427419412405398391383376369
∆TM
°CEMISSION
W/ml79787776757473727170
507500492485478470463456448441
∆TM
°CEMISSION
W/ml89888786858483828180
582574567559552544537529522515
∆TM
°CEMISSION
W/ml
∆tm = difference between the mean water temperature and the room temperature.The emission of the Sabiana Pulsar radiant panels have been certified by the laboratory at the University of Stuttgart H.L.K.applying the harmonised European Standard EN 14037, with the report Nr. DC205 D12.2108
13.820.727.634.5
Weight (kg)
1186178623862986
Length (mm)
Pulsar P.1 Pulsar P.2 Pulsar P.3 Pulsar P.4
Description
The SABIANA radiant panels can be described as thehygienic heating and cooling system par excellence. Thesystem does not create noise nor movement of air andtherefore dust. In addition, it avoids annoying streams ofair and the circulation of germs, dust and smeels and thusrepresents an important contribution to the prevention ofallergies and illnesses. This result is achieved with the bestdesign: the visible side is perfectly smooth, adapting to any
type of architecture and none of the peripheral walls are affected by the installation as thePULSAR radiant panel can be perfectly integrated into all types of false ceiling. Given its modulardimensions and the design of the water connections, the PULSAR panels can be installed insequence with ceiling lights, in complete compliance with the regulations on artificial lighting.The design of the PULSAR panel allows it to be installed in any building, including hospitalsand clinics. Indeed, its completely smooth visible surface allows sanitisation by spraying forcombating nosocomial illnesses in hospitals. The PULSAR radiant panels are inaccessible tothe people in the room. Therefore there is no risk of burning or electric shock in schools andparamedical environments and no risk of vandalism. In summer, the PULSAR panel can beused for cooling without creating streams of air and with a uniform temperature throughoutthe environment.
1
ConstructionPULSAR:The radiant panelsare made up of steel panel,1mm thick, on whichis fitted an oblong-shapedcopper pipe.The lengths of 1.20, 1.80,2.40 and 3.00 m ensureoptimum integration into600 x 600 mm modularceilings.As standard, the panelsare supplied in the colourRAL 9010, with a satinfinish created by anepoxy-polyester coat driedat 180°C. Other RAL coloursare also available.
Radiant PanelsPulsar
Thermal emission in accordance to the European Standard EN 14037
Cooling emission in accordance to the european standard EN 14240
Dimensions and Weight
3/4” male tHreaded ConneCtions
(supplied not mounted)
insulationHolding strip
insulation 30mm tHiCk
(supplied not mounted)Hanging Corner pieCe
Guida Prodotti Inglese.indd 3 27-02-2008 12:55:14
ConstructionDUCK-STRIP:The radiant panels consistof three main components:the reflecting panel, thetubes and the insulation.We have panels with 2 tubesor 3 tubes to provide avariation of output, theseare then formed into widthsof 30 cm, 60 cm, 90 cm,120 cm, to provide a variationin coverage. The strip isprovided in modular lengthsof 4 or 6 metres thusaccomodating a total stripto the nearest 2 metres.The strip is suppliedwith 3 sections to make upa complete strip, first,intermediate and final. Thefirst and final include headersand each section is connectedto the one before it.The DUCK STRIP panels arecompletely painted in lightGREY, RAL 9002 or in WHITE,RAL 9010 with epoxy-polyesterpowder dried at 180°C.Model: standard for hotwater and special for hightemperature hot water.
On request:• Special version for steam.• Special lenghts.
Radiant Panels Duck-Strip
2
Heating by radiation means absolute silence, no air movement,a constant temperature in the whole room and no danger offire.This implies energy savings, since the radiation directly heatsthe people, the walls, the floor and only indirectly the airso that the phenomena of heat stratification is reduced to aminimum.Radiant strips are the ideal solution for the heating of industrial,commercial and sports environments.
1) Connection2) Ø3/8bspconnection (fordrainvalve)3) Ø3/8bspconnection(forairvent)4) Header5) Ø1/2diametertube
6) Radiantpanel7) Strengtheningsection andhangingbracket8) Mineralwoolinsulation9) Edgingstrip10)Retainingclip
11)Sidereflectingskirt(optional)12)Retainingclipforsidereflectingskirt13)Belledendforwelding14)Make-upjoint15)Make-upjointbetweenpanel andheader(optional)
Modular LengthModular Width
Guida Prodotti Inglese.indd 4 27-02-2008 12:55:17
12001100
12900800
09600500
06300200
03LA
MODEL
30323436384042444648505254555658606264656668707274767880828486889092949698100102104106108110112114116118120
818793100106112119125132139145152159162165172179186193196200207214221228235242249256263271278285292300307314322329336344351359366374381389396
144155166177189200212223235247259271283289295307319331344350356368381394406419432444457470483496509522535548561575588601614628641655668682695709
2012172332492652812973143303473643803974064154324494664844935015195375555725906086276456636817007187377557747928118308498688879069259449639831002
27029131233335537639842044246448650953154355457760062364665766969271673976378781083485888390793195598010041029105410781103112811531178120312281253127913041330
∆TM(K)
DS 2-03W/m
DS 2-06W/m
DS 2-09W/m
DS 2-12W/m
30323436384042444648505254555658606264656668707274767880828486889092949698100102104106108110112114116118120
95103110118126134141149157165174182190194198207215224232236241249258267275284293302311320329338347356365374383393402411420430439449458468477487
169182195209223237251265279293308323337345352367382397412420427442458473489504520536552568584600616632648664681697714730747763780797813830847864
24526528430432434436538540642744846949150151253455657860061162264466768971273575778080382785087389792094496899210161040106410881112113711611186121012351260
31333836338841343946549151854457159862563965268070773576377779182084887790593496399210211051108011101139116911991229125912901320135113811412144314741505153615671598
∆TM(K)
DS 3-03W/m
DS 3-06W/m
DS 3-09W/m
DS 3-12W/m
∆tm = difference between the mean water temperature and the room temperature
Heating capacitycertified by the leadingEuropean laboratories:The heating capacity valuesdeclared in the literaturehave been certified by theleading European radiantpanel certification laboratory,the University of Stuttgartin Germany. The values havebeen obtained by applyingthe harmonised Europeanstandard EN 14037,approved in 2003.In Europe there are currentlyonly four laboratoriesauthorised to perfomthe tests and issue thecertificates of conformity to the standard.As the standard makesexplicit reference to the EECdirective 89/106 relatingto building products, the CEmark on the productis compulsory by law andthe product can only be soldif certified by one of thefour authorised Europeanlaboratories.
3
Emission for each metre of the different models of the Duck-Strip radiant panelsin compliance of the new EN 14037 STANDARD
Headers and connections
Guida Prodotti Inglese.indd 5 27-02-2008 12:55:18
WEIGHT (kg)1R 2R 3R
19
22
26
30
33
38
46
55
65
79
22
25
30
34
40
46
55
66
79
95
24
27
33
38
44
51
61
73
88
106
472
526
580
634
688
742
793
900
1010
1117
336
390
444
498
552
606
657
764
874
980
465
465
465
488
488
513
560
575
595
640
375
429
483
537
591
645
696
803
913
1020
220
220
220
220
220
220
210
210
210
210
130
130
130
130
130
130
140
140
140
140
1 1/4”
1 1/4”
1 1/4”
1 1/4”
1 1/4”
1 1/4”
1 1/2”
1 1/2”
1 1/2”
2”
A B C D E F Ø
1
2
3
4
5
6
7
8
9
10
SIZE
Thanks to its heart Sabiana is a Leader in theSales of Unit Heaters in Europe.The BATTERY of Sabiana Atlas and Helios unitheaters with steel tubes Ø 22 mm and aluminiumfins has the following advantages compared withthe copper-aluminium small diameter tubebatteries used by most of our competitors.The material used for the steel tube, which is verythick (1 mm instead of 0,3 - 0,4 mm), makes theSabiana battery extremely sturdy and long lasting.The tube big diameter reduces the water pressuredrop: this means that reduced power pumps areinstalled and a very rapid heating capacity isprovided.The Sabiana battery for unit heaters uses a reducednumber of tubes to give the same yield: thisdetermines a low resistance to the air flow andconsequently an optimum leaving air temperatureand a very high throw. The greater spacing betweenthe fins as well as their thickness facilitate cleaningand maintenance operations, which is assential tokeep the unit heater efficient.
The steel tube battery is the ideal choice forplants where all tubes and equipment are madeof steel because it avaids physical and chemicalunbalance due to the interaction of differentmetals. The special painting coat makes thebattery long lasting and increases the thermaloutput.The Sabiana battery can be used with hot waterand high temperature hot water with a wotkingpressure up to 16 bar and with steam up to 10bar. As a matter of fact each battery is submittedto two tests at 30 bars. However Sabiana inorder to meet any design and installation needcan offer a complete set of unit heaters withcooper tubes and aluminium fins. This batteryhas the same features (tube diameter, fin pitch,etc.) of the steel battery but it is built withcopper tube 0,7 mm thick, of higher quality andwith a total weight which is double comparedwith the batteries normally used for unit heaters.The wide range of products includes 10 differentsizes with 1, 2 or 3 rows each.
ATLAS-HELIOS heat exchanger
ConstructionATLAS:The main casing ismanufactured from galvanizedprepainted steel finished indove grey, and is assembledfrom three component parts.The standard motor fitted isa hermetically sealed motorwhich is maintenance free.The motor is supplied asstandard for a three phase230/400V 50Hz availablein accordance to the size at4, 6, 8 pole and at 4/8, 4/6,6/8 two speed version.A wide range of air boxesand accessories is available.The heat exchangeris manufactured fromthe highest quality steel orcopper tube. The fins arepressed from aluminiumsheet, bonded onto the tubesfacilitating the maximumtransfer contact available.The fan and motor assembly ismade up of three components:the fan, the motor and thefinger proof guard, whichalso acts as the main support.
On request:Special voltagesand special air boxes.
Unit Heaters
The ATLAS Sabiana Unit Heaters have a big ”heart”: a battery,which has been developed, studied and constructed expresslyfor heating industrial environments.The high thickness of the tubes (1 mm steel tube, 0,7 mmcopper tube), their large diameter (Ø 22 mm) and the excellentratio between the air flow and the output guarantee a longlife and a high environmental comfort.The ATLAS Unit Heaters are produced in 10 sizes from 5 to120 kW and are available with a 1-row battery for steam andhigh temperature hot water installations, a 2-row battery forhot water installations and a 3-row battery for low temperaturehot water installations.
Atlas
4
Guida Prodotti Inglese.indd 6 27-02-2008 12:55:20
batterycopper tube
batterysteel tube
rows2
size4
motor6 pole (900 r.p.m.)
rangeAtlas-Helios
6 A-H 4 2 SX SP
-3844-
3842-
3843-
4045-
3943-
3843-
4148-
4248-
4148-
4242
LEAVINGAIR
TEMP.°C
-1117012940
-1560017700
-2385027700
-3084035260
-4060046310
-5178059380
-4420053500
-6290072700
-8140098800
-97800118600
EMISSION
W565656595959616161646464666666696969656565676767686868717171
NOISELEVEL
at 5 m.dB(A)
16701560145023702200210034003300320042503980380056005500540074007200700058005400520085007600700010600100009500125001190011400
LEAVINGAIR
m3/h
MODELREF.
VOLUMEATLAS HELIOS
MOTORSPEED
r.p.m.UNIT
SIZ
E
4 A 11 4 A 12 4 A 13 4 A 21 4 A 22 4 A 23 4 A 31 4 A 32 4 A 33 4 A 41 4 A 42 4 A 43 4 A 51 4 A 52 4 A 53 4 A 61 4 A 62 4 A 63 6 A 71 6 A 72 6 A 73 6 A 81 6 A 82 6 A 83 6 A 91 6 A 92 6 A 93 6 A 101 6 A 102 6 A 103
4 H 11 4 H 12 4 H 13 4 H 21 4 H 22 4 H 23 4 H 31 4 H 32 4 H 33 4 H 41 4 H 42 4 H 43 4 H 51 4 H 52 4 H 53 4 H 61 4 H 62 4 H 63
1400
1400
1400
1400
1400
1400
900
900
900
900
1
2
3
4
5
6
7
8
9
10
-4148-
4146-
4247-
4248-
4348-
4348-
4452-
4552-
4452-
4452
LEAVINGAIR
TEMP.°C
-85009790
-1188013390
-1794020710
-2329026630
-3091035250
-4039046430
-3710043800
-5220059700
-6760081100
-7920097300
EMISSION
W484848515151525252545454565656606060606060616161626262656565
NOISELEVEL
at 5 m.dB(A)
11401040960156014401380223021702100291027202600363035603500479046704550440041003800600055005000800075007000950088008450
LEAVINGAIR
m3/h
MODELREF.
VOLUMEATLAS HELIOS
MOTORSPEED
r.p.m.UNIT
SIZ
E
6 A 11 6 A 12 6 A 13 6 A 21 6 A 22 6 A 23 6 A 31 6 A 32 6 A 33 6 A 41 6 A 42 6 A 43 6 A 51 6 A 52 6 A 53 6 A 61 6 A 62 6 A 63 8 A 71 8 A 72 8 A 73 8 A 81 8 A 82 8 A 83 8 A 91 8 A 92 8 A 93 8 A 101 8 A 102 8 A 103
6 H 11 6 H 12 6 H 13 6 H 21 6 H 22 6 H 23 6 H 31 6 H 32 6 H 33 6 H 41 6 H 42 6 H 43 6 H 51 6 H 52 6 H 53 6 H 61 6 H 62 6 H 63
900
900
900
900
900
900
700
700
700
700
1
2
3
4
5
6
7
8
9
10
21
23
26
32
40
56
25
27
34
42
51
66
29
31
42
52
62
76
WEIGHT (kg)1R 2R 3R
486
540
594
648
702
756
A
330
384
468
492
546
600
B
477
477
477
500
500
525
C
406
460
514
568
622
676
D
1
2
3
4
5
6
SIZE
Example 6A42 SX
The HELIOS unit heaters have been designed to providethe highest standards in an appearance which we feel iscomplimentary in the “90’s”.The Helios Unit with its futuristic polished aluminium andcontoured design is rather special.This smart new concept in commercial heating units willaccommodate all architects who are looking for somethingnew and different. Available in 6 size.
ConstructionHELIOS:The main casing ismanufactured from 4angular diecast aluminiumcomponents and lateralelements made of extruded,anodized aluminiumin a silver colour. The heatexchanger is manufacturedfrom the highest qualitysteel or copper tube.The fins are pressed fromaluminium sheet and bondedonto the tubes facilitatingthe maximum transfercontact available.The fan and motor assemblyconsists of three components:the fan, the motor and thefinger proof guard, whichalso acts as the main support.The standard motor fitted isa hermetically sealed motorwhich is maintenance free.The motor is supplied asstandard for a three phase230/400V 50Hz availablein accordance to the size at4, 6, 8 pole and at 4/8, 4/6,6/8 two speed version.A wide range of air boxesand accessories is available.
On request:Special voltagesand special air boxes.
Unit HeatersHelios
5
Identification code
Performance Data 85/75°C - 80°C Mean water temperature10°C Drop - Entering air temperature 15°C
Guida Prodotti Inglese.indd 7 27-02-2008 12:55:23
WATERCONTENTS (l) 1R 2R
WEIGHT(kg)
1R 2R26
33
45
82
30
38
51
92
1.7
2.9
5.3
8.2
2.5
4.2
5.9
12
15
25
32
40
ØN
526
636
743
1011
A
393
501
609
877
B
468
468
468
576
C
506
616
723
991
D
330
497
588
832
E
98
69.5
44.5
89.5
F
66
66
56
87
G
65
85
100
110
ØH
14
14
18
18
ØI
1/2”
1”
1 1/4”
1 1/2”
ØL
95
115
140
150
ØMMODEL
46 I 21-2246 I 41-4246 I 61-6268 I 91-92
The AIX units are available in 4 sizes and 8 models.This units heaters are suitable for low/high temperature hotwater and steam supply.The main casing in stainless steel and the heat exchangeroffer a great resistance in corrosive environment.
Dimensions
1000
1200
1400
E
696
803
913
C
123123123
N°ROWS
62707675869390104113
WEIGHTkg
4.38.212.35.811.116.67.614.521.8
WATERCONTENTS
(l)
793
900
1010
7
8
9
A=BSIZE STP
793
900
1010
D
OUTPUTAND
LEAVING AIRTEMPERATURE
AIRFLOWm3/h
DOORWIDTHL (m)
DOORHEIGHTH (m)
MOTORPOLESIZE STP
8 POLE (700 r.p.m.)6 POLE (900 r.p.m.)
Unit selection Emission - LTHW 85/70°C - EAT +15°C
32.5 kW44°C
43.6 kW44°C
58.7 kW44°C
38.4 kW53°C
50.0 kW53°C
70.4 kW53°C
-
-
-
38.4 kW43°C
52.5 kW41°C
70.7 kW42°C
46.5 kW52°C
60.7 kW48°C
85.7 kW50°C
3200
4200
6000
3 Rows
3500
4700
6400
2 Rows
3700
5100
6800
1 Row
4400
6000
8100
3 Rows
4600
6500
8500
2 Rows
5000
7300
9000
1 Row
-
-
-
7
8
9
789
SIZE STP
1.5
2.0
2.5
1.5
1.8
2.0
3.0 ÷ 4.0
3.5 ÷ 4.5
4.5 ÷ 5.5
2.5 ÷ 3.0
3.0 ÷ 3.5
3.5 ÷ 4.5
6
6
6
8
8
8
7
8
9
7
8
9
6
ConstructionAtlas STP:The main casingis manufactured fromgalvanized prepainted steelfinished in dove grey, andis assembled from threecomponent parts.The standard motor fitted isa hermetically sealed motor which is mainteinance free.The motor is supplied asstandard for a three phase230/400V 50Hz availableat 6 and 8 pole.
The ATLAS Sabiana STP Door Curtain unit with its specialfishtail diffuser is designed to provide a screen of warm airacross the door opening to restrict cold air blowing into thearea and to reduce the heated atmosphere inside the areafrom escaping out.
Atlas STP
AIXStainless Steel Unit Heater
ConstructionAIX:The main casing ismanufactured from AISI 304stainless steel, 1 mm thick.The adjustable louvres areheld firm by spring loadedpivots and they are mountedin horizontal position onthe front part of the unit.The fins are pressed fromaluminium sheet, bondedonto the AISI 304 stainlesssteel tubes facilitating themaximum transfer contact.The AIX units are suppliedwith flanged connections.The standard motor fittedis hermetically sealed motorwhich is maintenance free.The motor is 2 speeds,3 phase, single voltage,400V 50Hz, with klixonthermal protection.
dB(A)mm3/hr.p.m.
ROW
S
SIZE THROWAIR FLOWMOTOR SPEED
STEAM 6 BAR
E.A.T.+15°C
W.T.130/100°C
E.A.T.+15°C
W.T.85/75°C
E.A.T.+15°C
NOISE LEVEL
AT 5m
MODEL
1500
1400
2600
2400
4400
4100
7600
7000
2300
2100
3900
3600
6900
6300
10200
9200
950
950
950
950
950
950
700
700
1350
1350
1350
1350
1350
1350
900
900
51
51
54
54
60
60
62
62
59
59
64
64
69
69
68
68
13.8
-
22.9
-
35.9
-
70
-
16.5
-
27
-
42.7
-
79
-
∆
YkW∆
YkW∆
YkW
2
2
4
4
6
6
9
9
1
2
1
2
1
2
1
2
-
13
-
21.1
-
36.5
-
59.2
-
10.6
-
17.2
-
29.3
-
51.4
-
18.9
-
30.2
-
53.3
-
84.1
-
15.4
-
24.7
-
43
-
74
46 I 2146 I 2246 I 4146 I 4246 I 6146 I 6268 I 9168 I 92
∆
Y
7.5
7.5
12
12
18
18
21
21
11
11
16
16
25
25
28
28
∆
Y
∆
Y
∆
Y
Door Curtain Units
Guida Prodotti Inglese.indd 8 27-02-2008 12:55:26
The leaving air temperature from the units has a decisiveinfluence on hot air stratification and consequently onenergy saving: for each centigrade degree of increase intemperature there is a 1.5% increase in energy consumption.The use of the induction flow optimizer has the followingadvantages:a) energy saving: - reduced hot air stratification within the building - reduced operating time of the units with the same ambient temperature.Energy saving varies between a minimum of 5% and amaximum of 15%, with maximum assessment in two seasons.b) environment comfort advantages: - increased floor-temperature uniformity with greater comfort area - possibility to install smaller and quieter units, due to the increase of the throw.
ConstructionJETSTREAM:The JETSTREAM inductionflow optimizer is composed of a metal frame whichincorporates a set of specialshaped anodised extrudedaluminium louvres movedby a set of manuallyor motor-controlled levers.The Jetstream induction flowoptimizer can be mountedon the air outlet af all unitheater Sabiana series Heliosor Atlas (up to size 6).This equipment can alsobe installed at a later stageand can be mounted onall previously installed unitheaters.The Jetstream induction flowoptimizer increases the airspeed thanks to the specialshape of its deflectinglouvres which allowthe creation of various layersof hot air at the unit heateroutlets. The depressioncreated between the layersinduces a lateral aspirationof ambient air that mixeswith the air heated bythe unit, thus reducingthe leaving air temperatureand increasing the throw.
Induction Flow Optimizersfor Atlas and HeliosJetstream
7
No-StratThe Sabiana No-Strat is an anti-air-stratification and heatsaving appliance, which can be used on all existing industrialas well as commercial warm air heating applications.As soon as the temperature of the higher zone exceedsthe predetermined value (i.e. 20°C), the electric fan willbe actuated to guide the hot air into the lower part of theroom and to distribute it at the right level for use.
ConstructionNO-STRAT:The casing is manufacturedfrom galvanised prepaintedsteel sheet (1 mm. thick)finished in dove grey.The adjustable louvres areheld firm by spring loadedpivots. The fan assembly ismade up of the aluminiumhelicoidal fan, finger proofsupport and three phase230/400 V electric motorworking at 1400 rpm or 900rpm. A room thermostat ismounted on the unit for theautomatic on/off switchingof the motor in accordancewith the temperature underthe ceiling.
Air flow producedby a unit heater without flow optimizer
Air flow producedby a unit heater equipped with a flow optimizer
634
634
688
688
742
742
900
1010
A
mm
634
634
688
688
742
742
900
1010
B
mm
629
629
683
683
737
737
895
1005
C
mm
537
537
591
591
645
645
803
913
D
mm
488
488
488
488
513
513
575
595
E
mm
61
52
66
56
69
60
67
68
100
60
150
90
200
120
300
400
4 ÷ 7
3 ÷ 6
5 ÷ 9
4 ÷ 8
7 ÷ 12
6 ÷ 10
7 ÷ 15
8 ÷ 18
0.63
0.30
0.63
0.30
0.63
0.30
1.50
1.73
150
75
150
75
150
75
370
550
3500
2500
5500
4000
7500
5200
11000
14000
1400
900
1400
900
1400
900
900
900
NOISELEVELat 4 mdB(A)
SURFACE
m2
INSTALLAT.HEIGHT
m
AMPERE
V 400
MOTOR
W
AIR FLOW
m3/h
SPEED
r.p.m.
MODEL
DNS-450/4
DNS-450/6
DNS-500/4
DNS-500/6
DNS-550/4
DNS-550/6
DNS-650/6
DNS-750/6
Antistratificationand Heat Recovery Units
Guida Prodotti Inglese.indd 9 27-02-2008 12:55:30
(*) Sound pressure measured in an open field at a distance of 1 metre from the fan outlet
Working static pressure = 50 Pa
Efficiency (-5°C/20°C) Leaving air temperature Efficiency (-5°C/20°C) Leaving air temperature Efficiency (-5°C/20°C) Leaving air temperature
High speed
Medium speed
Low speed
Length (B) Width (A) Height (H) Weight
mmmmmmkg
OUTSIDE DIMENSIONS ENY 1
103083028541
ENY 2
1400100041085
ENY 3
1400100047093
ENY 4
14001000470105
ENY 5
17501310531140
ENY 6
17501310531155
%°C%°C%°C
HEAT RECOVERY UNITS ENY 1
54.6 8.6 55.3 8.8 57.1 9.3
ENY 2
54.2 8.5 55.6 8.9 56.6 9.2
ENY 3
54.5 8.6 56.4 9.1 58.0 9.5
ENY 4
51.9 7.9 53.5 8.4 56.6 9.2
ENY 5
58.2 9.5 60.8 10.2 62.3 10.6
ENY 6
51.1 7.8 53.5 8.4 55.3 8.8
Air flow Sound pressure (*) Air flow Sound pressure (*) Air flow Sound pressure (*)
High speed
Medium speed
Low speed
m3/hdB(A)m3/hdB(A)m3/hdB(A)
MODEL ENY 1
620 54 535 52 365 49
ENY 2
1200 56 940 52 780 49
ENY 3
1450 58 1080 53 840 48
ENY 4
2150 62 1690 58 1040 51
ENY 5
2500 60 1630 58 1270 48
ENY 6
3800 64 2800 60 2230 56
MAIN TECHNICAL CHARACTERISTICS
HOT WATER BATTERY - W Version (Water temperature 80/60°C - Entering air temperature +15°C)
ELECTRIC RESISTANCE - E Version
AMBIENT - A Version
MI-1000W
3400/270027.4/24.0
MI-1500W
5100/405043.0/37.6
MU-1500E
1900/11606.813.5
MC-1000E
2400/17006.012.0
MC-1500E
3600/23009.018.0
MU-1000E
1250/9004.59.0
Air flow m3/h 1st step emission kW 2nd step emission kW
MODEL
MU-1500W
1700/110011.3/8.7
MC-1000W
2200/152015.5/12.5
MC-1500W
3300/187023.4/17.3
MU-1000W
1150/8507.1/6.4
Air flow m3/h Emission kW
MODEL
MI-1000A
3800/3000
MI-1500A
5700/4500
MU-1500A
1900/1160
MC-1000A
2400/1700
MC-1500A
3600/2300
MU-1000A
1250/900 Air flow m3/h
MODEL
1570534355
1070534355
1570417280
1070417280
MI-1000 MI-1500MC-1000 MC-1500
4 m 6 m2.5 m
MU-1500
1564300200
MU-1000
1064300200
ABC
MAX HEIGHT
MODEL
ConstructionMELTEMI:• Casing made of galvanized steel with epoxy powder painting.• Two speed 230/400V motor for MU-MC-MI models.• High performance aluminium tangential fans directly coupled to the motor.• For W version, batteries with copper pipes and aluminium fins.• For E version, stainless steel electric resistance for MU models and sealed electric resistances for MC-MI models.
The MELTEMI Sabiana door curtains offer the bestflexibility in the protection of open doorways. Thedoor curtains are available in the air ventilationambient version, with hot water battery and withelectric resistance. The 3 sizes are supplied in 16different models with lengths from 1064 mm to
1570 mm that are suitable for door heights from 2,5 m to6 m in residential, commercial and industrial installations. Thanks to their
modularity, the door curtain units can be connected together to give a continual air barrierof the desidered length to protect doors of big dimension.
Meltemi
Heat Recovery Units
Construction ENERGY:• The structure of the unit is made from galvanised plate sandwich panels, 24 mm thick, filled with high-density mineral wool that combines properties of heat and sound insulation. Size ENY 1, on the other hand, uses both sandwich panels and self-supporting panels insulated with foam material.• The heat recovery units are static plate exchangers that transfer heat between two flows of air due to the temperature difference. The two flows of hot and cold air entering the heat recovery unit are sub-divided into sections that run between two plates, which carry hot air and cold air alternatively. These sections are sealed to prevent any possible contamination between the air flows. The heat is exchanged by the plates that make up the walls of the sections, with efficiency that reaches values between 50% and 75%.• Condensate collection pan with drain connection on the side.• The discharge and intake air fans are double intake with forward blades. The rotor is directly coupled to the electric motor, reducing the overall size. Single-phase motor, 230 V power supply with built-in motor protection, three speeds on all models.• Pleated cell filters, 48 mm thick, efficiency G3, with filtering media made from regenerable synthetic material, class F1.• Built on a special galvanised plate frame, expanded 3/8” copper pipes, aluminium fins with 2.1 mm fin spacing, brass manifolds.
Energy
Door Curtains
8
The ENERGY ducted units have been designed to allow energysavings in the ventilation systems of public and private environments,such as bars, restaurants, offices, shops, etc., by recovering theheat from the air discharged and trasferring it to the fresh airintroduced into the environment.The heat exchange between the discharged air and the fresh airintroduced occurs via a static cross-flow exchanger, designed to
recover over 50% of the heat.The Energy series features 6 sizes that cover a range of air flows from 400 to 3500 m3/h.
Guida Prodotti Inglese.indd 10 27-02-2008 12:55:33
360001200024000340047123.05.00.5890012050
300001200018000350042123.05.00.5890012050
24000600018000360036123.05.00.5890012050
166505550111001800448
3.04.50.409005048
11100555055501800358
3.04.50.409005048
9720324064801000446
2.54.00.409005043
Emission Step
Air flowL.A.T. (e.w.t. +15°C)
Throw Mounting heights
Helicoidal fan motor 400V 50Hz
Noise level at 5 m
6480324032401000336
2.54.00.409005043
Watt1st W2nd Wm3/h°Cm
Min mMax m
Ar.p.m.
WdB(A)
-36E
-30E
EM2424E
EM1717E
EM1111E
EM909E
EM606E
EM606E
EM909E
EM1111E
EM1717E
EM2424E
-30E
-36E
Length (mm) Height (mm) Fan ØELECTRAMATIC Weight (kg)ELECTRA 90 Weight (kg)
ELECTRAMATIC
ELECTRA 90 MODEL
5704703003230
5704703003533
6505704004341
6505704004543
7306705006058
730670500-
61
730670500-
64
ELECTRAMATIC
ELECTRA 90 MODEL
The sound pressure levels apply to the reverberant field of a 1003 room and a reverberation time of 0,5 sec.
13.0
10991420
10.0
10991420
9.5
8841205
7.0
669990
5.0
454775
20.0
669990
13.5
454775
400 V~ (3P+N)230 V~FSE 4FSE 3FSE 2FSE 1FSE 2FSE 1
Speed Air flow Emission Fan max Sound pressure B L
m3/hkWA
Lw dB(A)mmmm
MODEL
1650-
39
28005.60
47
310008.50
50
1650-
39
28005.00
47
310007.50
50
1380-
26
24804.00
33
36006.00
42
1290-
33
23602.90
38
34504.50
43
1190-
31
22401.90
36
33003.0
41
1290-
33
23602.90
38
34504.50
43
1190-
31
22401.90
36
33003.00
41
FSE 5
The ELECTRA electrical unit heaters for hot air horizontaldischarge are available in 7 sizes, with outputs from 6 to36 kW.The Sabiana ELECTRAMATIC offers a new concept in electricunit heaters as they include all the automatic controlsand overheat protections making the unit functionallyindependent.The control panel is integral in the unit, fully automaticand need only to be connected to the eletrical supply andif desired to the thermostat. Outputs from 6 to 24 kW.
Construction ELECTRA 90and ELECTRAMATIC:Outer casing: made of steelfinished in a oven driedgrey powder paint.Electric heat exchanger:is made using a tungstonelement hermetically sealedinside a steel tube woundwith spiral fins.Electric motor: three phase,400V 50Hz, single speed900 r.p.m. The unit includesinternal thermostaticprotection and terminal boardfor the electrical connections.
Electra 90and Electramatic
FSEThe FSE electrical fan convectors are designed to providecontrollable heat for residential and commercial buildings.Available in 5 sizes from 3 kW to 8.5 kW with integralelectric board with protection and safety relays, the FSEjoins safety and aestheticalappearance in a highquality product.
Electric Fan Convectors
Electric Unit Heaters
Construction FSE:• Electrical resistance: three phase 400V (all sizes) or single phase 230V (sizes 1 and 2 only).• Outer casting: made from sheet steel prepainted and easily removeable for acces to the unit.• Fan and motor assembly: the fans are dynamically and statically balanced during manufacture in order to have an extremely quiet unit. The motor is wired for single phase and has three speeds.• Electrical heat exchanger: is made using a tugnston element hermetically sealed inside a finned steel tube.• Control panel: include all the automatic controls and protections with the room thermostat and the terminal boards.
PrimulaThe PRIMULA Mini Vectors are designed to providecontrollable heat at smaller outputs for residential andcommercial buildings. Available in 4 sizes (1100-3600 Watt)for hot water and low temperature hot water; also availablewith electric resistance battery.
Fan Convectors ConstructionPRIMULA:The cabinet is manufacturedfrom heavy gauge steelsheet, finished in a mostattractive oven dried greypaint, RAL 7038.The two speed single phasemotor drives a staticallyand dynamically balancedtwin aluminium tangentialfan assembly.The heat exchanger ismade from drawn coppertube mechanically fittedto aluminium fins.
9
SD MODEL WITH HOT WATER BATTERY - PE MODEL WITH ELECTRIC BATTERY
10141621101416
5607609601160560760960
----
700/10001000/15001000/2000
1400198030253605
---
120170260310---
41160255215---
1130162024453025
---
97140210260---
30135170150---
0.150.250.400.60
---
7010015020070100150
120170260320120170260
(A)WEIGHT
(kg)OUTPUT
(W)OUTPUT
(W)WATER FLOW
(l/h)∆p DROP
(mm/H2O)OUTPUT
(W)WATER FLOW
(l/h)∆p DROP
(mm/H2O)
WATER 80/70°C (SD Mod.) (PE Mod.)WATER 70/60°C (SD Mod.)WATER
CONTENTS
(l)MIN
SPEED
AIR FLOW (m3/h)
MAX
SPEED
MODEL
10 SD15 SD25 SD30 SD10 PE15 PE20 PE
Guida Prodotti Inglese.indd 11 27-02-2008 12:55:38
L.A.T.
°C
EMISSION
WMODEL
NOISE LEVELat 5 mdB(A)
MOTORSPEEDr.p.m.
SIZEAIR
FLOWm3/h
39
39
39
39
39
39
43
42
41
40
41
40
40
42
44
44
24.400
28.400
41.800
48.800
64.400
79.200
19.100
22.100
32.700
38.000
50.200
61.500
77.800
92.000
107.000
115.100
4Z-007
4Z-107
4Z-211
4Z-311
4Z-415
4Z-515
6Z-007
6Z-107
6Z-211
6Z-311
6Z-415
6Z-515
6Z-618
6Z-722
6Z-822
6Z-924
56
60
63
65
66
73
48
52
54
55
56
63
64
65
65
66
3.000
3.400
5.100
6.000
7.800
9.700
2.000
2.400
3.700
4.400
5.700
7.100
9.000
9.900
11.000
12.000
900
1400
0123450123456789
WATER CONTENT (l)
1.201.301.902.403.204.305.205.905.906.50
WEIGHT (kg)
313642525875859597106
A B C C1 D F G H I N O P Q R S Ø DN
68078078088088010801080108010801080
180180280280380380455555555605
430430530530630630705805815865
560560660700760870945104510551105
408412567599709739843943944994
380380480480580580655755765815
460560560660660760760760760760
5376457507508588581073107310731073
165194248248273273330330330330
460560560660660760760760760760
331331431435535539614714714765
61270270280280210051005100510051005
62626268688080808080
350421421491491755755755755755
350421421491491440440440440440
1 1/4”
1 1/4”
1 1/4”
1 1/2”
1 1/2”
2”2”2”2”2”
25252532324040404040
0123456789
SIZE
Dimensions, weight and water content
ConstructionCOMFORT:The casing is made of spunsteel on both top andbottom sections whichis designed to give greaterstrength and quieteroperation. The casingis then phosphatised andfinished with an epoxy,polyester powder coatingof light grey, RAL 9002.These top and bottomsections are assembled bymeans of threaded tie-rods,thus enabling the unitto be rapidly dismantledfor maintenance etc.The circular heat exchanger of the COMFORT SabianaUnit Heater is constructedof copper tubes withaluminium fins.Standard motors arethree phase, closed frame,flange mounted, pre-greasedbearings. COMFORT Sabianaunits are supplied asstandard with three phasemotors 230/400 V availableat 4 pole, 6 pole, 4/6 pole,4/8 pole, 6/8 pole.
Circular Unit Heaters
For all factory premises, either commercial or industrial, theefficient COMFORT Sabiana vertical discharge Circular UnitHeater offers a pratical and economical solution for spaceheating. They are available in nine sizes for hot water (17 -117 kW), high temperature hot water (23 - 175 kW) andsteam (23 - 210 kw).
Comfort
Technical table:emission ltHW 85/75°C,
10°C drop, entering air temperature 15°CRadial
louvre “DRA”
Is the model mostcommonly used;made of eight
separately adjustablelarge louvres, shapedso as to be able
to cover the whole ofthe outlet area and therefore adaptable forminimum to maximum heights.This diffuser allows the air to be directedmore easily to the areas where it is requiredmost, or conversely, if you do not require airto one particular corner you can close downone, two or three vanes and restrictthe distribution.
Four conediffuser “DA”
Is designedto distributethe air in largeopen areasat a reasonablylow level. Its other
particular advantage isits low noise level and aesthetic appearance.Ideal for restaurants, schools, hospitals,theatres etc.
Two waydiffuser “T2”
It is designedto give a twoway or corridordistribution,
suitable for corridoror gangway areas,
between storage racksetc., generally mounted at any heightdependant upon the length of corridor required.
10
Guida Prodotti Inglese.indd 12 27-02-2008 12:55:41
27.123.420.3
9.88.57.5
5000400031005853494001.78
24.320.318.3
8.37.06.2
4300280022005649432751.35
20.817.915.7
7.36.45.7
3000230019005348422211.14
13.911.910.1
4.43.83.2
1650125010004943371020.52.5
17.715.212.8
6.15.34.3
2200170013005248411961.02.5
15.613.712.2
---
5300430034005853494001.78
14.012.010.8
---
4500300024005649432751.35
11.910.69.5
---
3200250021005348422211.14
10.39.18.1
---
2350185014505248411961.02.5
8.37.36.6
---
1750135011004943371020.52.5
RE11 RE21 RE31 RE41 RE51 RE12PE12
RE22PE22
RE32PE32
RE42PE42
RE52PE52
Noise level at 4 m
Air flow
Cooling
Heating
High speed Medium speed Low speed
High speed Medium speed Low speed
Emission High speed Medium speed Low speed
TECHNICAL CHARACTERISTICS MOD.
kWkWkW
kWkWkW
m3/hm3/hm3/hdB(A)dB(A)dB(A)
WAµF
Emission High speed Medium speed Low speed
Electric motorIP 44
230V - 50Hz
Notes:Battery working pressure: 10 bar
Battery testing pressure: 22 bar
The performance figuresrefer to the followingworking conditions:
HEATINGEntering air temperature: + 20°C
Water temperature: + 70/60°C
COOLINGEntering air temperature:+ 27°C d.b. / + 19°C w.b. - R.H. 46%
Water temperature: + 7/12°C
COOLING: R.H. 55%E.A.T. 28°C
L.T.H.W. 11/15°C
2.7
3.5
5.4
6.6
9.5
11.9
15.0
16.5
19.0
20.6
3.1
4.0
6.2
7.5
10.9
13.6
17.2
18.9
22.0
23.7
900 r.p.m. 700 r.p.m.
47
46
44
44
44
44
44
46
48
47
41
40
39
38
39
39
38
40
43
42
900 r.p.m. 700 r.p.m.
15.1
17.4
25.8
30.0
39.6
48.5
61.4
72.7
84.5
90.7
17.6
20.4
30.3
35.3
46.7
57.1
72.2
85.6
99.5
106.7
900 r.p.m. 700 r.p.m.
1.400
1.680
2.600
3.080
4.000
4.970
6.300
6.930
7.700
8.400
2.000
2.400
3.700
4.400
5.700
7.100
9.000
9.900
11.000
12.000
46
49
51
52
53
60
61
63
60
61
48
52
54
55
56
65
66
68
65
66
900 r.p.m. 700 r.p.m.
NOISE LEVELat 5 mdB(A)
900 r.p.m. 700 r.p.m.
AIR FLOW
m3/h
HEATING:L.T.H.W. 85/70°C - E.A.T. 15°C
kW L.A.T. °CSIZE
0123456789
A B C C1SIZE
680
780
780
880
880
1080
1080
1080
1080
1080
180
180
280
280
380
380
455
555
555
605
430
430
530
530
630
630
705
805
815
865
560
560
660
700
760
870
945
1045
1055
1105
0123456789
The POLARIS Air Conditioners for vertical discharge offera practical and economical solution for space heating andcooling with hot water supply (17 - 117 kW) or chilledwater supply (3 - 24 kW).
Construction POLARIS:The casing is made of spunsteel on both top and bottomsections which is designedto give greater strengthand quieter operation. Thecasing is then phosphatisedand finished with an epoxy,polyester powder coating,in light grey, RAL 9002.The lower casing is also thecondensate collection tray withappropriate drain connection.These top and bottomsections are assembled bymeans of threaded tie-rods,thus enabling the unitto be rapidly dismantledfor maintenance etc.The POLARIS circular heatexchanger is constructed ofcopper tubes with aluminiumfins. Standard motors arethree phase, closed frame,flange mountedwith pre-greased bearings.Polaris units are supplied asstandard with three phasemotors 400V, 6/8 pole.
Polaris
ElegantThe ELEGANT air conditioners are suitable for heating andcooling of low height environments like shops, bars, work-shops, supermarkets, etc. They are for ceiling mountingwith central air inlet and four lateral discharges.
ConstructionELEGANT:The casing is made of spunsteel on both top andbottom sections whichis designed to give greaterstrength and quieteroperation. The casingis then phosphatised andfinished with an epoxy,polyester powder coating,in white, RAL 9010.The lower casing is also thecondensate collection traywith appropriate condensatepump on PE models.The ELEGANT circular heatexchanger is constructedof copper tubeswith aluminium fins.Standard motorsare with closed frame,IP 44 protection, F class,3 speeds, 230V - 1Ph - 50Hzsupply.
Air Conditioners
Air Conditioners
2.52.63.03.53.8
3.03.03.54.04.5
3.53.84.04.55.0
3.53.54.04.55.0
kgmm m R = m m R = m
MAXHEIGHT
SURFACEMAX
HEIGHTSURFACEWEIGHTA X AMOD.
HIGH SPEED LOW SPEED
E1E2E3E4E5
600750750830830
2631323839
11
Guida Prodotti Inglese.indd 13 27-02-2008 12:55:45
COOLING HEATING
SPEED AIR FLOW AIR THROWNOISE LEVEL
AT 5 mMODEL
MOUNTING
HEIGHT
-19.9
-17.9
-19.8
-17.5
-19.4
-17.2
-19.1
-17.0
L.A.T.°C
-3.7-
4.4-
6.4-
7.5-
9.8-
11.3-
17.6-
20.0
kW TOTAL
WATER TEMPERATURE
85/75°C - ∆t 10°CE.A.T. +15°C
WATER TEMPERATURE 11/15°C - ∆t 4°CE.A.T. +28°C
R.H. 55%
WATER TEMPERATURE
45/40°C - ∆t 5°CE.A.T. +15°C
WATER TEMPERATURE 7/12°C - ∆t 5°CE.A.T. +28°C
R.H. 55%
44.849.552.857.544.249.252.358.248.451.256.960.149.853.257.461.9
L.A.T.°C
20.416.123.318.534.526.939.729.646.340.352.044.089.575.9103.682.0
kW27.129.030.432.326.929.030.332.728.729.932.233.629.230.632.334.2
L.A.T.°C
8.36.69.57.514.111.016.212.119.016.621.418.236.531.042.333.6
kW-
3.6-
4.2-
6.2-
6.9-
9.2-
10.2-
16.9-
18.4
kW SENSIBLE
-5.3-
6.3-
9.1-
10.6-
13.8-
15.9-
25.0-
28.2
kW TOTAL
59515951645464546052605266606660
dB(A)117.5107161214101814171326202418
m2200150020001400380025003400215043503600400031508250625078005950
m3/hr.p.m.m1350950135095013509501350950900700900700900700900700
2.5 - 4
2.5 - 4
3 - 4.5
3 - 4.5
3 - 5
3 - 5
3.5 - 5.5
3.5 - 5.5
46F23
46F24
46F43
46F44
68F63
68F64
68F93
68F94
-21.1
-19.6
-21.1
-19.2
-20.8
-19.0
-20.5
-18.8
L.A.T.°C
-3.1-
3.5-
5.2-
5.8-
7.7-
8.5-
14.2-
15.4
kW SENSIBLE
1.9
2.9
4.3
8.4
23
30
40
75
526
634
742
1010
390
498
605
874
475
400
525
650
1”
1”
1”
11/2”
376
476
576
818
78
76
83
90
71
83
83
100
58
58
58
67
A B C D E F1 F2 LWEIGHT
(kg)WATER
CONTENT (l)MODEL
46 F 23/24
46 F 43/44
68 F 63/64
68 F 93/94
Operation conditions:Cooling: Entering air temp. 35°C - Entering/Leaving cooler water temp. +7/12°C Heating: Entering air temp. +7°C - Leaving cooler water temp. 45°C
ConstructionKRIOSABIANA:• Air to water Chillers and Heat pumps with Ecological Gas R410a and scroll compressors.• With helicoidal fans for external installation.• With centrifugal fans for internal installation.• KWR and KWH water to water chillers.
The range KRIO Chillers and Heat Pumps offers: Maximum efficiency:due to the high mechanical output of the compressors and theoptimum sizing of the components of the cooling circuit we achievehigh performances and low consumptions. Reduced noise levels:this is possible due to the electronic regulator controlling the speed ofthe ventilators and thanks to the optimum sizing of scroll compressors.High resistance against corrosion: the casing consists of galvanizedprepainted steel or peraluman with stainless steel screws. Limiteddimensions for installation in small spaces. Simple installation:on request a complete hydraulic kit can be supplied for all sizes.
Krio
Air Conditioners
ConstructionJANUS 05:The main casingis manufactured fromgalvanized prepainted steelfinished in dove grey,and is assembled fromthree component parts.The condensate collectiontray must is fittedin the unit.The standard motor fittedis a hermetically sealedmotor which is maintenancefree. The motorsare 2 speeds, 3 phase,single voltage, 400V 50Hz,with klixon thermalprotection.The heat exchangeris manufactured fromthe highest quality coppertube. The fins are pressedfrom aluminium sheet,bonded onto the tubesfacilitating the maximumtransfer contact.The fan and motor assemblyis made up of threecomponents: the fan,the motor and the fingerproof guard, which alsoacts as the main support.
Chillers
The Sabiana JANUS 05 air conditioner provides a simple solutionto centralised Air Conditioning systems offering the followingadvantages: • simple installation • low equipment cost • lowuser runnig cost • flexibility in installation and project design• minamum space is required for the units not taking up valuablefloor space, this type of unit also dispenses with expensive andcumbersome duct work systems. The Sabiana JANUS 05 rangeof air conditioners can be matched to the Sabiana Krio rangeof indoor and outdoor chillers and heat pumps.
12
Janus 05
Air to water monoblock CHILLERS and HEAT PUMPS with centrifugal fans
Air to water monoblock CHILLERS and HEAT PUMPS with helicoidal fans
Water to water monoblock CHILLERS and HEAT PUMPS
-38,1--
38,142,5
5,5-
5,56,2--
7,1-
7,18,0--
8,2-
8,29,2--
9,7-
9,710,8--
-7,1--
7,18,0
-8,2--
8,29,2
-9,7--
9,710,8
-12,1--
12,113,4
-14,9--
14,916,6
-17,8--
17,819,8
-22,0--
22,024,6
-26,4--
26,429,4
-30,6--
30,634,0
6M 7M 8M 10M 7 8 10 12 15 18 22 26 30 32Size
Type Model Emission
-159--
154173
5,65,65,46,55,36,4
6,97,06,68,16,78,0
8,68,78,210,08,29,7
1111,410,412,410,812,8
-13,2--
12,614,4
-15,4--
14,616,8
-37,1--
36,442,4
-43,0--
42,348,0
-50,5--
49,056,1
-57,0--
55,363,7
-74,8--
73,081,6
-86,5--
84,194,6
-97,9--
94,9107
-109--
107122
-121--
119135
-138--
137153
4,9-
4,65,7--
005 006 007 008 010 012 015 040 045 050 060 075 085 100 115 130 145 160Size
Type Model Emission
-159159--
151173
-145145--
138157
-127127--
120136
-112112--
107121
-96,996,9--
93,9105
-86,886,8--
82,593,5
-76,076,0--
72,081,0
-57,057,0--
57,565,2
-50,550,5--
47,954,2
-45,145,1--
42,848,1
-38,138,1--
37,742,9
-32,9---
31,335,5
-26,4---
25,128,8
-21,9---
20,823,6
-19,3---
18,421,0
-15,4---
14,616,8
-13,2---
12,614,4
11,011,4-
10,412,410,812,8
8,68,7-
8,210,08,29,7
6,97,0-
6,68,16,78,0
5,65,6-
5,46,55,36,4
4,9--
4,65,7--
160005 006 007 008 010 012 015 019 022 026 032 040 045 050 060 075 085 100 115 130 145
Three phase KS T.C.H.
Single phase KS M.C.H.
CoolingCoolingCoolingHeatingCoolingHeating
Single phaseThree phase
KS M.C.R.KS T.C.R.
Three phase KS T.E.H.
Single phase KS M.E.H.
Single phaseThree phaseThree phase
KS M.E.R.KS T.E.R.
KS T.E.R.S.
CoolingCoolingCoolingCoolingHeatingCoolingHeating
Type Model EmissionSize
Three phase KWH
Single phase KWH
CoolingCoolingCoolingHeatingCoolingHeating
Single phaseThree phase
KWRKWR
Guida Prodotti Inglese.indd 14 28-02-2008 9:49:19
Newplastic outlet
grid in one singlepiece: extraordinarydesign and strenght
FUTURA is the new fan coil that continuesthe Sabiana tradition based on high reliabilityand low noise levels.Futura is the result of great commitmentin terms of energy and resources to offera more modern product from every pointof view:
• Design: Sabiana proposes a fan coil withan absolutely innovative design which is apatented decorative model. A fan coil withsuch developed aesthetics constructed withcontinuous and rounded curves was neverbeen designed before. For the first time theFutura fan coil has the casing made almostcompletely of syntetic shockproof material,apart from the front panel. This allows anexceptional and continuous attention todetails. Even the controls, both on board and remotefor wall installation, have been completelyre-designed to perfectly match the equipmentand the surrounding environment.
• Quietness: Sabiana exploited all itsresearch and development skills to reducethe noise level of this fan coil. This aspectis increasingly important both for designersand end users.
The result is an extremely lownoise level both on the FSCmodel with centrifugal fan andon the FST model with tangentialfan, as proved by the Euroventcertification.
• Range: the Futura series isabsolutely unique: no other fan coil comes
with such a wide range of models, that includesversions with a centrifugal or tangential fanas well as the “home” series with reducedlength and depth.Moreover, all the Sabiana fan coils can beequipped with the patented Crystall electro-static filter, of electronic type, which offersin a single appliance the functions of airpurification and treatment.The Futura fan coils areavailable on demand ina wide range of coloursand are equipped withevery kind of accessoriesand controls to meet allelectronic and installationneeds.
• Easy use: every detail has been carefullystudied to guarantee easy assembly, use andmaintenance of the fan coils, like for instancethe functional symmetric feet, the wide valvespace (170 mm) and easy access to the filterin all models.Moreover each version has the same internalstructure, identical in both horizontal andvertical models, in order to standardizeproduction and guarantee a greater flexibilityin distribution and installation.
Electric andelectronic controls:All the controlsof the new range havebeen totally re-designedand feature a modernand attractive design.The FUTURA range allowsany possibility of controland setting, both withonboard and remote controlsfor remote installation.
Futura Fan Coil Units
EuroventCertificationSabianaobtainedtheEuroventcertificationin1996.EuroventisanindependentbodyrecognizedinallEuropethatensurestotalreliabilityandtransparencyofperformances.
Guida Prodotti Inglese.indd 15 27-02-2008 12:55:51
3001.801.482.3013.17.051423631
4502.802.173.5024.721.154454134
6003.903.104.8017.014.151423631
7504.603.805.8013.611.154453834
10005.704.807.4023.421.658494135
12006.605.508.8015.014.260514640
14007.506.3010.1019.618.065565145
3001.501.252.064.63.850413631
4502.502.103.3014.111.452433833
6003.502.954.4512.911.051423326
7504.003.355.2017.914.554453832
10004.804.056.5027.823.458494135
12005.955.008.0021.118.460514742
14006.705.709.0729.725.865565145
m3/hkWkWkWkPakPa
dB(A)*dB(A)*dB(A)*dB(A)*
Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Sound power Lw Sound pressure (High speed) Sound pressure (Medium speed) Sound pressure (Low speed)
FSC 14 FSC 24 FSC 34 FSC 44 FSC 54 FSC 64 FSC 74FSC 13 FSC 23 FSC 33 FSC 43 FSC 53 FSC 63 FSC 73FSC MODEL
474689904904111911191119
218218218218218248248
1234567
A BSIZE
IV - IO
225225225225225255255
77098512001200141514151415
1234567
L HSIZE
MV - MO - MVB
COOLING Entering air temperature + 27°C d.b., + 19°C w.b.(summer mode) Water temperature + 7/12°C
Figures at high speed
FuturaSabiana FSC. 2 pipes unit. The following standard rating conditions are used:
* The sound pressure levels apply to the reverberant field of a 100 m3 room and a reverberantion time of 0.5 sec.
HEATING Entering air temperature + 20°C(winter mode) Entering water temperature + 50°C Water flow rate as for the cooling conditions
Sabiana’s high reliability is dressing FuturaFor its most traditional version, Sabiana focused its attention on design, optimization ofpracticality as well as on noise level reduction.This fan coil, based on a traditional technology, offers excellent environmental comfort.
Futura FSCFan Coil Units with centrifugal fan•7sizes: from300to1400m3/h
•1battery:3or4rows
•2batteries: 3or4rows(cooling) and1row(heating)
•5versions: MV,IV,MO,IO,MVB
14
Guida Prodotti Inglese.indd 16 27-02-2008 12:55:55
2501.301.011.6020.016.545363025
3601.871.532.607.87.045363025
5002.802.053.6020.018.846373125
1800.870.701.2011.07.042332622
FSR 1 FSR 2 FSR 3 FSR 4m3/hkWkWkWkPakPa
dB(A)*dB(A)*dB(A)*dB(A)*
Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Sound power Lw Sound pressure (High speed) Sound pressure (Medium speed) Sound pressure (Low speed)
FSR MODELL 770 985 1200670
FSR 1 FSR 2 FSR 3 FSR 4MOD.
* The sound pressure levels apply to the reverberant field of a 100 m3 room and a reverberantion time of 0.5 sec.
4502.401.703.1012.09.847383326
6003.402.874.3013.211.048393327
7504.052.995.0219.716.452433732
10004.603.886.3027.426.155464136
3001.701.402.258.07.248393125
4502.601.993.309.27.648393327
6003.702.624.6520.120.847383227
7504.503.525.5536.633.452433732
10005.304.466.9020.617.456474238
FST 14 FST 24 FST 34 FST 44 FST 54FST 13 FST 23 FST 33 FST 43 FST 533001.401.172.084.63.748393225
m3/hkWkWkWkPakPa
dB(A)*dB(A)*dB(A)*dB(A)*
Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Sound power Lw Sound pressure (High speed) Sound pressure (Medium speed) Sound pressure (Low speed)
FST MODEL
When silence is goldenThe series FST is equipped with an exclusive tangential fanassembly developed by the Sabiana’s R&D Dpt. The fan hasa 120 mm diameter, the largest one on this kind of unit,and is able to give performances similar to those obtainedwith centrifugal fans. Its special spiral shape guaranteesa perfect and continuous airflow on the whole batterysurface, optimizes thermal exchange and avoids the annoying“pumping” effect of other kinds of tangential fans. Thanksto the long-term experience gained on this fan assembly,associated with an exclusive silencer, the noise levelhas been remarkably reduced, as proved by the Euroventcertification.
Futura FST Fan Coil Units with tangential fan
Fan Coil Units with tangential fanFutura FSR
•5sizes: from300to1000m3/h
•1battery:3or4rows
•2batteries: 3or4rows(cooling) and1row(heating)
•5versions: MV,IV,MO,IO,MVB
•4sizes: from180to500m3/h
•1battery:2rows
•1version:MVHigh comfort for small environmentsThe series FSR is designed to be equipped with a tangentialfan and the units are of smaller dimensions for smallerenvironments (depth 18 cm). Futura is the ideal equipmentfor offices and houses, is no longer a simple technicalproduct but also a furnishing element that can give addedvalue to the aesthetics of the surrondigs.
FuturaSabiana FSR. 2 pipes unit. The following standard rating conditions are used:
* The sound pressure levels apply to the reverberant field of a 100 m3 room and a reverberantion time of 0.5 sec.
FuturaSabiana FST. 2 pipes unit. The following standard rating conditions are used:
15
COOLING Entering air temperature + 27°C d.b., + 19°C w.b.(summer mode) Water temperature + 7/12°C
Figures at high speed
HEATING Entering air temperature + 20°C(winter mode) Entering water temperature + 50°C Water flow rate as for the cooling conditions
COOLING Entering air temperature + 27°C d.b., + 19°C w.b.(summer mode) Water temperature + 7/12°C
Figures at high speed
HEATING Entering air temperature + 20°C(winter mode) Entering water temperature + 50°C Water flow rate as for the cooling conditions
Guida Prodotti Inglese.indd 17 27-02-2008 12:55:59
Meeting room
Recreation areas
Industrial areas
Hospitals
Schools
Shops
Offices
12.6
12.6
18
12.6
9
9
9
63
63
63
63
45
45
36
MINIMUM AMOUNT OF EXTERNAL AIR
WITH FILTRATION PLANT (NO SMOKERS)IN m3/h PER PERSON
TYPE OF AREA
100% EXTERNAL AIR VENTILATION
(WITH SMOKERS)IN m3/h PER PERSON50 20 10 5 2 1 0,5 0,2 0,1 0,05 0,02 0,01 0,005
DIMENSIONS (IN MICRONS) OF AIR BOURNE PARTICLES
CIGARETTE SMOKE
DUST
BACTERIA
SMOKE
POLLEN
EFFICIENCY OF THE CRYSTALL ELECTROSTATIC FILTER
TheCRYSTALLSABIANAelectrostaticairfilterimprovestheairqualityofanyroom.ThefilterwhichisfittedtoaFuturafanconvectorcanremoveparticlesevensmallerthen0.01micron.It ismorethan90%efficientandhasaverylowpowercosumption.
Energy saving example.•MeetingsRooms.•With6peoplepresent.•Someofwhomaresmokers.•FreshairintakeaccordingtoASHRAE6x63=378m3/h•IfthefreshairistakenthroughtheCRYSTALLelectrostaticfiltertheair thathastobeintroducedfromoutsideisonly6x12,6=75,6m3/h.
OUTLET OF CLEAN AIR
INLET OF POLLUTED AIR
PHASE3
PHASE2
PHASE 1
Collectionsurface
Air withoutparticles < 1 µm
Air withoutparticles ≥ 50 µmPre-filter
Electrostaticfilter
Inductedanode
Polarizedelectrode
Ionic field
Eliminationof the biggestparticles
OperatingprincipleoftheCrystallSabianaelectronicfilter
Theairissuckedinandfirstpassesamechanicalprefilter,whichkeepsawayparticlesofmorethan50µm(dust,insects,etc.)(Phase 1).
Thenthesmallestparticles(50÷0.01µm)areexposedtoanintensiveionicfleldandarepolarized(Phase 2).
Thechargedparticlespassingthroughthesecondfiltersection,arepushedbackbytheanodeandattractedtothecollectionsurfacesbyastrong,inductedmagneticfield(Phase 3).
Theairwhichleavestheunitisfreefrompollutingparticles.
The CRYSTALL FS electronic filter matches the need for betterair conditioning with the concepts of space and design.With this filter the various stages of air treatment are combinedin one appliance.Thanks to this new patented filter, air pollutants such ascigarette smoke, dust, pollen and most biological organismsare eliminated.In addition, as fresh air is not being introduced to obtainthe best climatic conditions, there are consequential energysavings.
Electronic Filter Crystall FSConstructionCRYSTALL FS:The CRYSTALL Sabianaelectrostatic filter is builtof extruded profilesin aluminium alloy andhas got a very resistantstructure.It takes up practicallyno valuable room space.It fits neatly intothe bottom of the fan coilswhich only means thatthe casing has to be raisedslightly.The positioning of the filterallows for easy and efficientmaintenance.It can be cleanedvery easily under runningwater and has an almostunlimited life.The constructionof the unit using the fanconvector instead of havingits own inbuilt fan makesit extremely competitivelypriced when compared toseparately mounted filters.When the heating or coolingsystems are switched off,the unit can still be usedjust as an air purifier.
16
Heating, cooling, heating + purification,cooling + purification, purification
External air flow recommended according toASHRAE standard 62-1981 for area ventilation
Guida Prodotti Inglese.indd 18 27-02-2008 12:56:01
2-PIPE UNITS 4-PIPE UNITS
11406.344.6918.99.1021.44839312477
0.36
15007.715.8326.911.0029.9534431251200.53
15008.776.4925.08.5615.3534431251200.53
18208.896.8434.712.7038.8584939251700.74
182010.207.6832.09.8019.5584939251700.74
5202.701.988.83.4610.84536312444
0.20
7103.342.5613.44.4016.65344362468
0.32
7103.932.9510.53.359.05344362468
0.32
8803.812.9717.04.9520.55950403290
0.45
8804.533.4614.03.7911.05950403290
0.45575x575x275 820x820x303
5202.682.049.73.358.24536312444
0.20
7104.333.1815.15.2311.45344362468
0.32
8805.023.7419.76.1717.75950403290
0.45
11406.164.5921.67.7715.14839312477
0.36
15009.516.4826.910.7123.0534431251200.53
182011.108.2535.614.0030.6584939251700.74
6102.331.9013.53.0314.55041312457
0.27
6101.981.6410.02.649.04940312457
0.27820x820x303575x575x275
SK 04 SK 14 SK 24 SK 26 SK 34 SK 36 SK 44 SK 54 SK 56 SK 64 SK 66SK 02 SK 12 SK 22 SK 32 SK 42 SK 52 SK 62
Air flow Cooling total emission Cooling sensible emission∆p Cooling Heating∆p Heating Sound power Sound pressure (High speed) Sound pressure (Medium speed) Sound pressure (Low speed)
Dimensions
Fan
m3/hkWkWkPakWkPa
dB(A)*dB(A)*dB(A)*dB(A)*
WA
mm
MODEL
Figures at high speed
* The sound pressure levels apply to the reverberant field of a 100 m3 room and a reverberantion time of 0.5 sec.
COOLING (summer mode)Entering air temperature + 27°C d.b., + 19°C w.b.Water temperature + 7/12°C
HEATING (winter mode)Entering air temperature + 20°CWater temperature + 50°CWater flow rate as for the cooling conditions
The attractive design and the high quality of all the components allow the SkyStar cassette fan
coil to perfectly fit in all the enviroments,offering the quietest operational mode.The 4 smaller sizes are designed to fit into false ceiling
standard 600x600mm modules. The 3 bigger sizes havea 800x800mm dimension that offers the best solution
in terms of silent operation and price/performance ratio for these high capacity units. The SkyStar range offers great installation flexibility and very easy maintenance.The acces to all the most important components is from the bottom side without the need toremove any parts of the false cieling. Every unit can have fresh air intake, the air distributionis in four directions and a remote air diffuser can be connected to the unit. The condensatepump is integral with the unit and is easiliy accessible. The range is made of 6 sizes. Everysize can be supplied with 2 or 4 pipes and with 2 or 3 way 230 V, ON-OFF valves. The valveinstallation is mandatory. Different electronic remote controls are available. The TCS-DI modelwith micro-processor automatically selects the fan speed in accordance to the difference betweenroom and set temperature and can control up to 10 units.The infra-red remote control is also available.
ConstructionSKYSTAR:• Air inlet and air diffuser: internal grid, air diffuser and louvres are made of synthetic material of white color (RAL 9003).Other RAL coloursavailable on request.• Internal casing: made of galvanized steel with thermal and acoustic polyethylene insulation, fire-retardant rating B2 to DIN 4102.• Fan assembly: extremely quiet radial flow fan with self-lubrificating ball bearings. External rotor motor 230V / 50Hz, class 1 insulation, with integrated thermal contact for motor protection, wired to the terminal on the outside of the casing.• Condensate collection tray: polystyrene foam condensate tray, shaped in order to optimize the air diffusion, fire retardant rating B2 to DIN 4102.• Air filter: synthetic washable filter, class G1 (EN 779) easily removable.• Condensate pump: two step float switch, integral with the unit and wired to the terminal on the outside of the casing, 650 mm maximum head.• Valve set: two or three way valves, ON-OFF operation with thermostatic actuator.
SkyStar Cassette Fan Coils
Technical characteristics
The following standard rating conditions are used:
2-pipe units
COOLING (summer mode)Entering air temperature + 27°C d.b., + 19°C w.b.Water temperature + 7/12°C
HEATING (winter mode)Entering air temperature + 20°CWater temperature + 70/60°C
4-pipe units
17
Guida Prodotti Inglese.indd 19 27-02-2008 12:56:03
SI / SI-IR 1 SI / SI-IR 2 SI / SI-IR 31
4031.951.542.506.04.0363930
25222.311.863.009.06.0384233
36322.602.304.1511.07.0424837
15703.002.364.059.09.0364739
26913.392.724.5212.011.0385041
37803.602.805.3014.014.0475544
16973.412.744.6412.011.0435143
28103.743.055.0815.013.0455445
39204.303.206.2220.018.0735948
SI-IR 41
3341.601.282.075.04.0223627
23761.731.392.226.06.0243930
34361.911.703.057.07.0264635
m3/hkWkWkWkPakPaW
dB(A)dB(A)*
Speed Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan Sound power Lw Sound pressure Lp
MODEL
SI-IR-V 2 SI-IR-V 41
5072.201.753.8518.014.0485345
25272.351.904.1522.016.0505647
36002.502.104.5025.019.0606049
14391.601.452.9513.09.0404738
24781.751.603.2015.014.0425142
35401.951.753.5018.017.0465544
m3/hkWkWkWkPakPaW
dB(A)dB(A)*
Speed Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan Sound power Lw Sound pressure Lp
MODEL
1 2 3 4MODEL
505050
2500
830285189
907290195
LHPABCD
* Sound pressure in open field conditions at 1 metre from front of unit.
The Sabiana MISTRAL high wall fan coilharmonoiusly combine the need of performance,silence, ease of installation and simplemaintenance, through a range of four modelsavailable with elegantly designed infra-redremote controls.The MISTRAL are manufactured in 4 sizes forhot water supply (3,6-8,1 kW) and chilled watersupply (1,9-4,3 kW).
High Wall Fan CoilsConstructionMISTRAL:• Cabinet: made from a strong ABS structure with exceptional mechanical characteristics and excellent resistance to ageing.• Fan assembly and electric motor: tangential fan with three-speed 230V ~ motor, ensuring high efficiency and minimal noise levels.• Heat exchange coil: made from copper tubes and aluminium fins; the coil has two 12 mm diameter copper pipe fittings.• Available with infra-red remote control (SI-IR units) or with wall mounted control (SI units).
Mistral
COOLING (summer mode)Entering air temperature + 27°C b.s., R.H. 47%Water temperature + 7/12°C
HEATING (winter mode)Entering air temperature + 20°CEntering water temperature + 50°CWater flow rate as for the cooling conditions
2-pipe units. The following standard rating conditions are used:
Technical characteristics
18
Models without valve (valve on request)
Models with fitted valve
Guida Prodotti Inglese.indd 20 28-02-2008 9:51:49
483
467
467
467
186
210
210
210
413
449
449
449
149
176
176
176
206
236
236
236
669
884
1099
1550
218
248
248
248
A B C D E F G3 ROW
BATTERY
4 ROW
BATTERY
3 ROW
BATTERY
4 ROW
BATTERY
WEIGHT
(kg)WATER
CONTENT (l)
16
24
29
45
17
26
32
48
WEIGHT
(kg)MODEL
FSL 1FSL 2FSL 3FSL 4
1.0
1.7
2.0
3.2
1.3
2.3
2.9
4.2
WATER CONTENT
(l)
1.4
1.7
2.0
2.7
0.4
0.5
0.6
0.9
1 ROW
ADDITIONAL BATTERY
FSL 13 FSL 23 FSL 33 FSL 431
26040
1.111.461.877.46.25046523743
9060741
229050
1.221.592.058.87.45549564047
9060741
331559
1.321.712.2110.08.66351594250
9060741
Speed Air flow Available pressure Cooling sensible emission Cooling total emission Heating∆p Cooling∆p Heating
Fan Sound power outlet Sound power inlet + radiated Sound pressure outlet Sound pressure inlet + radiated Plenum code
m3/hPakWkWkWkPakPaW
dB(A)*dB(A)*dB(A)*dB(A)*
MODEL1
44040
2.002.683.2412.010.09247533844
9038004
248050
2.152.873.4913.811.49949554046
9038004
354059
2.363.143.8416.213.711051584249
9038004
173040
3.244.275.3014.413.014051574248
9060744
282050
3.564.655.7816.815.016055604651
9060744
393065
3.945.106.3919.817.619057634854
9060744
195040
4.345.817.0712.010.417552584349
9038009
2110050
4.906.518.0014.413.019556614752
9038009
3120065
5.266.958.5216.815.021058644955
9038009
FSL 14 FSL 24 FSL 34 FSL 441
26040
1.231.672.0411.69.85046523743
9060741
229050
1.351.832.2513.811.75549564047
9060741
331565
1.471.982.4616.013.76351594250
9060741
Speed Air flow Available pressure Cooling sensible emission Cooling total emission Heating∆p Cooling∆p Heating
Fan Sound power outlet Sound power inlet + radiated Sound pressure outlet Sound pressure inlet + radiated Plenum code
m3/hPakWkWkWkPakPaW
dB(A)*dB(A)*dB(A)*dB(A)*
MODEL1
44040
2.152.953.559.07.89247533844
9038004
248050
2.323.163.8410.29.19949554046
9038004
354065
2.573.484.2512.010.411051584249
9038004
173040
3.554.815.848.47.214051574248
9060744
282050
3.935.286.4310.29.116055604651
9060744
393065
4.385.847.1712.010.419057634854
9060744
195040
4.726.457.7213.312.417552584349
9038009
2110050
5.367.288.7917.015.519556614752
9038009
3120065
5.787.819.4318.917.621058644955
9038009
ConstructionSLIM:The casing consistsof self-supporting panelsof hot dip galvanized steel,which are completelyinsulated with a 3 mm thickthermoacoustic,flame retardant lining.The fan section consistsof centrifugal fansin galvanized steelwith one or two impellersand a directly coupled,single phase, three speedmotor, 230V/50 Hz.The heat exchangeris constructed in 3/8” diaexpanded copper tubeswith aluminium fins with apitch of 2.1 mm. The steelheaders have 1/2” maleconnections and an extratapping for an air vent.The heat exchangeris mounted in a galvanizedsteel carrying frame.
High Pressure Fan Coil UnitsSlimThe SLIM Fan Coil Units are for concealed installation
and connection to a small duct system.The SLIM Fan Coil Units are manufacturedin 4 sizes for hot water supply (2-15 kW)and chilled water supply (2-7 kW).
COOLING Entering air temperature + 27°C d.b., + 19°C w.b.(summer mode) Water temperature + 7/12°C
The “High static ducted fan coil” rating conditions are used:
* The sound pressure levels apply to the reverberant field of a 100 m3 room and a reverberating time of 0,5 sec.
HEATING Entering air temperature + 20°C(winter mode) Entering water temperature + 50°C Water flow rate as for the cooling conditions
Technical characteristics
19
Guida Prodotti Inglese.indd 21 27-02-2008 12:56:08
1245035
13.4910.4518.509.58.060680
2300050
15.3912.1521.5412.010.265820
3336560
16.5313.2123.4013.811.769960
1172035
10.087.6513.409.88.357440
2214050
11.679.0315.9012.710.760500
3250060
12.8910.1317.9115.312.963580
1161535
8.816.8212.0013.311.353340
2182550
9.537.4613.2015.413.056390
3213060
10.508.3614.8018.315.560460
1125535
6.795.289.349.98.355240
2139050
7.265.7110.1111.29.457260
3151560
7.656.0710.7012.210.360290
MT 54MT 14 MT 24 MT 34 MT 441
85035
4.543.596.414.33.647125
2100550
5.064.077.255.24.451160
3118060
5.594.588.136.25.356205
MODEL Speed Air flow Available pressure Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating
Sound pressure Fan
m3/hPakWkWkWkPakPa
dB(A)*W
1233035
13.0410.0511.259.017.960680
2285050
14.8911.7012.7211.422.465820
3320060
16.0112.7213.3613.024.469960
1163535
9.727.368.259.217.257440
2203550
11.288.699.4612.122.160500
3237560
12.489.7510.3614.525.963580
1153535
8.526.567.0212.611.653340
2173550
9.227.197.5414.613.156390
3202360
10.188.058.1017.414.960460
1119035
6.565.085.579.317.355240
2132550
7.025.495.9210.519.357260
3143560
7.415.846.2111.621.060290
MT 54 + 1MT 14 + 1 MT 24 + 1 MT 34 + 1 MT 44 + 11
81035
4.393.453.974.08.647125
295550
4.893.914.404.810.351160
3112060
5.424.414.755.811.956205
MODEL Speed Air flow Available pressure Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating
Sound pressure Fan
m3/hPakWkWkWkPakPa
dB(A)*W
The MAESTRO Fan Coil Units are for concealed installationand connection to a duct system. They supply a
consistent air flow with static pressure upto 160 Pa.The MAESTRO Fan Coil Units aremanufactured in 5 sizes for hot watersupply (11-42 kW) and chilled watersupply (4-16 kW).
High Pressure Fan Coil UnitsConstructionMAESTRO:The casing consistsof self-supporting panelsof hot dip galvanized steel,which are completelyinsulated with a 3 mm thickthermoacoustic,flame retardant lining.The fan section consistsof centrifugal fansin galvanized steelwith one or two impellersand a directly coupled,single phase, three speedmotor, 230V/50 Hz.The heat exchangeris constructed in 3/8” diaexpanded copper tubeswith aluminium finswith a pitch of 2.1 mm.The heat exchangeris mounted in a galvanizedsteel carrying frame.
Maestro
2-pipe units. The following standard rating conditions are used:
* The sound pressure levels apply to the reverberant field of a 100 m3 room and a reverberating time of 0,5 sec.
Technical characteristics
COOLING Entering air temperature + 27°C d.b., + 19°C w.b.(summer mode) Water temperature + 7/12°C
4-pipe units. The following standard rating conditions are used:
HEATING Entering air temperature + 20°C(winter mode) Entering water temperature + 70/60°C
MT 1MOD.1113698310
MT 21113698310
MT 31113698360
MT 41445853360
MT 51445853435
ABC
20
COOLING Entering air temperature + 27°C d.b., + 19°C w.b.(summer mode) Water temperature + 7/12°C
HEATING Entering air temperature + 20°C(winter mode) Entering water temperature + 50°C Water flow rate as for the cooling conditions
Guida Prodotti Inglese.indd 22 27-02-2008 12:56:10
A B C D W Z ELECTROSTATICFILTER N°
ELECTROSTATICFILTER
2344
335415515515
300380480480
65404040
195300400400
8058058051355
9509509501500
840x112840x112840x1121390x112
MOD.1234
Speed Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Sound pressure Fan max
MODEL 4321
6.04.42.82.0
1240015.009.9030.207.05.355
2380020.3014.0043.2013.110.061
3530024.8017.7055.1013.115.465
115009.806.5018.309.06.953
2210012.208.5023.8014.511.056
3300015.2011.0032.0024.318.561
110005.804.1012.202.62.050
215507.905.8017.604.83.755
321009.607.3022.407.45.660
16003.702.607.402.21.645
210005.203.7011.404.63.551
314006.404.7015.007.55.755
m3/hkWkWkWkPakPa
dB(A)*A
ConstructionOCEAN:The casing consistsof self-supporting panelsof hot dip galvanized,prepainted steel, which arecompletely insulated with a20 mm thick thermoacoustic,flame retardant lining.The fan sectionconsists of centrifugal fansin galvanized steel with twoimpellers and a directlycoupled, single phase, threespeed motor, 230V/50Hzwith permanently installedcondensor, insulationclass F, power 185 W.The heat exchangeris constructed in 3/8” diaexpanded copper tubeswith aluminium finswith a pitch of 2.1 mm.The steel headers have3/4” male connectionsand an extra tappingfor an air vent.The heat exchangeris mounted in a galvanizedsteel carrying frame.
Slim-line Air ConditionersOcean With Crystall
electrostatic filter sectionThe Ocean Slim-line Air Conditioners areconstructed in four basic versions in orderto satisfy any installation requirements andthanks to their compact size they can fitin narrow areas or false ceilings.
By the use of the same modular components, 6 vertical and 9 horizontal versions can be obtained with airflows ranging from 600 to 5300 m3/h.It is possible to mount either 2, 3, 4 or 6 row heat exchangers for water, or a 4 row heatexchanger for direct expansion.Thanks to its modular construction the unit can be easily disassembled and re-assembled onsite and the air flow direction can be changed according to the specific needs.
Accessories:• Suspension Brackets• Condensate collection tray• Humidification section• Supplementary electric element• Recessed manual speed control switch• Variable speed drive• Manual speed control and thermostat• Outlet box with circular diffusers• Inlet box with damper• Outlet grid with double louvres
With 4 row battery
* Sound pressure in open field conditions at 1 metre from front of unit.
COOLING (summer mode)Entering air temperature + 26°C b.s., R.H. 55%Water temperature + 7/12°C
HEATING (winter mode)Entering air temperature + 20°CEntering water temperature + 70/60°C
The following standard rating conditions are used:
Technical characteristics
OCEAN dimensions Crystall electrostatic filter + Carbon filter
21
Guida Prodotti Inglese.indd 23 27-02-2008 12:56:12
WATER
FLOW
l/h
LEAVING AIR
TEMPERATURE
°C
EMISSION
kWROWS
AIR FLOW
m3/h
32.3542.3749.7754.3871.2283.6676.1399.70117.1298.93129.05151.28142.40186.88219.08171.61226.34263.21
41.948.653.641.948.653.641.948.653.641.247.552.741.147.552.741.347.752.8
282837044350475362267312665587161023686881131713266125061638919211150711984923082
234234234234234234
4400
7400
10400
14000
20200
24500
50
80
110
140
200
250
MODELWATER
FLOW
l/h
SENSIBLE
EMISSION
kW
TOTAL
EMISSION
kWROWS
AIR FLOW
m3/h
17.0420.8226.6828.9335.5245.4739.9850.4663.8554.4072.1092.5078.78104.41133.95101.58126.45160.94
14.0016.4019.3623.7727.9833.0032.8539.3646.0141.6051.1062.7060.2474.0090.8075.5089.62109.09
293135812656497661097821687686801098293331236415830135161791322982174282169527612
346346346346346346
4400
7400
10400
14000
20200
24500
50
80
110
140
200
250
MODEL
Ø HEADERS
2R 3R 4R 6R1 1/4”
1 1/2”
1 1/2”
1 1/2”
2”2 1/2”
1”1 1/4”
1 1/2”
1 1/2”
2”2 1/2”
1”1 1/4”
1 1/2”
1 1/2”
2”2”
1”1”
1 1/4”
1 1/2”
1 1/2”
2”
S
74074087087011501250
H1
490490590590810810
H2
74074087087011501270
H3
350350350350400450
L
125019001900256025802780
MODEL
5080110140200250
The ZEUS Sabiana Air Handling Units have been designed anddeveloped to meet heating and air conditioning needs forindustrial, commercial and residential installations.The range is available in 6 vertical models and 6 horizontalmodels with an air flow varying from 5,000 to 25,000 m3/h.Heating outputs from 32 to 260 kW, cooling from 17 to 160 kW.
Air Handling UnitsConstructionZEUS:• Casing: aluminium holding frame and double skin sandwich panels 25 mm thick. Indoor panel made of galvanized steel, outdoor panel made of galvanized and prepainted steel in light blue colour.• Insulation: non-inflammable mineral wool insulation (fire class A1 in accordance to DIN 4102) density 90 kg/m3, thickness 25mm.• Fan: galvanized centrifugal fan with double exausting outlet, statically and dynamically balanced.• Transmission: driving pulley with varying diameter.• Motor: three phase form B3 UNEL-MEC 400V 50Hz protection IP 55, class F.• Battery: copper tubes, aluminium fins, painted steel collectors with 2, 3, 4 or 6 rows.• Filter: pleated cells type class G3, regenerating synthetic, zinc-coated frame, thickness 48 mm - front extraction.
Zeus
Dimension and coil header Diameter
Emission
E.A.T. 20°C, W.T. 70/60°C E.A.T. 27°C, R.H. 50%W.T. 7/12°C
22
Guida Prodotti Inglese.indd 24 27-02-2008 12:56:14
The VULCAN PRO air handling units are available in 23different sizes, in order to provide an air flow rangefrom 1.450 m3/h to 78.800 m3/h.They can satisfy any need of air conditioning, filtration,
humidification and heat recovery for any kindof enviroment: commercial, sport, residential,medical and industrial.
ConstructionVULCAN PRO:The Vulcan Pro Air HandlingUnits are made withholding aluminium frameand with double skinsandwich panels.Thermo-acoustic insulation35mm or 50mm thick, madeof polyurethane foam orhigh density mineral wool.
Air Handling UnitsVulcan Pro
23
Strong construction andexcellent thermal and acoustic insulation.
Modular panel construction,with no thermal or acoustic bridges
Selection diagrams Unit Combinations
Guida Prodotti Inglese.indd 25 28-02-2008 11:30:22
63.7590245
95.5750295
143.3994320
VAS 63 VAS 95 VAS 143kWAC
MODEL
ConstructionDUCK VAP:• The radiant panels is a special version of Duck Strip for steam. There are panels with 2 tubes or 3 tubes to provide a variation of output, these are then formed into widths of 30 cm, 60 cm, 90cm, to provide a variation in coverage. The strip is provided in modular lengths of 4 or 6 metres thus accomodating a total strip to the nearest 2 metres. The strip is supplied with 3 sections to make up a complete strip, first, intermediate and final. The first and final include headers and each section is connected to the one before it. The DUCK STRIP panels are completely painted in light GREY, RAL 9002 or in WHITE, RAL 9010 with epoxy- polyester powder dried at 180°C.• Sabiana VAS series steam boilers by Comitec provided in three heating outputs (63,7 - 95,5 - 143,3 kW) can be jointed in order to obtain higher emissions.• Sabiana ASA air venting device by Comitec.• Control panel QP1 and QP2 to control 1 or a series of steam generators.
Duck VapThe DUCK VAP vacuum steam join great flexibility andrecognised advantages of radiant panels with steamboilers with reduced installation costs and with thepossibility of installing the boilers outside, thereforereducing the need for a boiler room. The uniquenessof this system lies in their operation under vacuum,which allows the natural expansion of the steam andthe return of the condensation by gravity. It is there-fore a closed and sealed circuit in which there is noconsumption of steam and no refill with water. Thevacuum system furthermore generates steam at amaximum temperature of 110°C, which corresponds toa relative pressure of 0.45 bar and as a consequencethe system is not pressurised under normal operatingconditions.
24
Vacuum Steam Systems
Guida Prodotti Inglese.indd 26 27-02-2008 12:56:19
INOXSABIANA 25/25R INOXSABIANA 50/50R Inside diameters mm Outside diameters mm Weight per linear metre, InoxSabiana kg/m Weight per linear metre, InoxSabiana -R (copper) kg/m Inner wall Rock wool insulation InoxSabiana outer wall InoxSabiana -R (copper) outer wall Pressure class with gasket Pressure class without gasket Max temperature of the flue gas with gasket °C Max temperature of the flue gas without gasket °C Gasket Thermal resistance of the wall R at 200°C m2K/W Minimum distance to combustible materials class O (flue serving a boiler on liquid or gas fuel) mm Minimum distance to combustible materials class G (flue serving a boiler on solid fuel) mm Average roughness value for the straight length Flow resistance coefficient of the insulated components Metric screw and bolts
According to EN 13384-1 : 2002According to EN 13384-1 : 2002
Stainless steel
According to EN 13384-1 : 2002According to EN 13384-1 : 2002
Stainless steel
50
75
50
75
AISI 316L steel, 2B finish, nominal thickness 0,5 mm50 mm thick - Min. density 90 kg/m3 - Toll. 0+30%
AISI 304 steel, BA finish, nominal thickness 0,5 mmAnnealed DHP copper 99,9 nominal thickness 0,6 mm
–N1 (40 Pa) negative pressure operation
–450–
AISI 316L steel, 2B finish, nominal thickness 0,5 mm25 mm thick - Min. density 90 kg/m3 - Toll. 0+30%
AISI 304 steel, BA finish, nominal thickness 0,5 mmAnnealed DHP copper 99,9 nominal thickness 0,6 mm
P2 (200 Pa)N1 (40 Pa) negative pressure operation
160450
Silicon rubber, blue0.74 0.75 0.76 0.77 0.77 0.780.34 0.36 0.36 0.37 0.37 0.38 0.39 0.39
35045017.519.5
40050019.522.0
45055022.024.5
50060024.026.5
55065026.029.0
60070028.031.5
1001504.45.1
1301805.56.2
1502006.17.0
1802307.38.3
2002507.99.0
2503009.711.0
30035011.412.9
35040013.214.9
Summary table
ConstructionINOXSABIANA 25/50:Inner lining:stainless steel AISI 316L.Thickness: 0,5 mm.Plasma welding.It is resistant to corrosiveproducts and it is free toexpand or contract as fluegas temperature changes.Outer casing:stainless steel AISI 304.Thicknees: 0,5 mm.Plasma Welding.It is weatherproof andcarries the structure load.Insulation:rockwool mineral wool.Thickness 25 mm or 50 mm,density around 90 kg/m3.Fixings and supports:stainless steel AISI 304.Minimized thermic bridgebetween inner and outercasing. Each insulated componentis single packed.
FluesInoxSabiana 25/50The system is designed for gravity flow application andit is suitable for oil and gas fired appliances as domesticand industrial boilers, stoves and heaters.
25
Guida Prodotti Inglese.indd 27 27-02-2008 12:56:22
Diameter (mm):
Weight (kg/m per linear metre):
Steel: Inox AISI 316 L
Thickness (mm): 0.5
Max temperature of the flue gas (°C): 200 with gasket, 600 without gasket
Max rated pressure (Pa): 200 (elements with gasket)
801.1
1001.4
1201.7
1301.8
1402.0
1502.1
1602.3
1802.5
2002.8
2503.5
3004.2
The Sabiana INOXMONO series has been designed tooffer the maximum guarantee of safety and long lifein the discharge of flue gas from boilers.The male and the female ends of each element aremade together using the same belling machine, so asto ensure perfect coupling, with a minimum toleranceof ± 0.15 mm. All the elements in contact with theflue gas are made from AISI 316L stainless steel. Each element, as well as having its own locking clamp,can be supplied with a silicone gasket: this solutionis ideal for connecting the single walled flue to type Cappliances (wall hung boilers with forced draught)that may operate in conditions of overpressure.The choice of the materials, the use of the latestconstruction techniques and the care paid to everyaccessory place the product at the top of its category,reflecting the high quality of all Sabiana products.The range includes 11 different diameters (from80 to 300 mm) and a complete series of accessories
for satisfying all installation requirements.The Sabiana flues are perfectly adaptable to the latesthigh efficiency boilers, which have very low flue gastemperatures and high CO2 contents, thanks to thefollowing fundamental characteristics:• low thermal inertia with consequent immediate draught;• perfect impermeability to water vapour;• high resistance to corrosion, due to the quality of the steel used and the type of welding;• very low roughness values, so as to minimise the inside pressure drop.The single walled flues are usually installed insidedamaged existing chimneys (retubing).For outdoor installation, the bottom part of the fluemust be protected for the first two metres: nonetheless,double walled flues are recommended for these typesof installations, so as to assist the draught and decreasecondensation, which otherwise may be excessive.
FluesConstructionINOXMONO SABIANA:• AISI 316 L stainless steel wall (austenitic stainless steel 18/10 Mo with low carbon content, grade UNI X 2, CrNiMo 1712). Thickness: 0,5 mm. Properties: high resistance to intergranular corrosion and particularly aggressive products.• Silicone rubber gasket resistant to temperatures of up to 200°C.• Microplasma welding on all straight elements.• Junction on the 90° Tee piece made using the drawning process.• All the support and fastening elements are made from AISI 304 stainless steel (aluminium barge cover and wind-protection collar).• The screws supplied are in stainless steel.
InoxMono Sabiana
Summary table
elementwithgasket straightmodule microplasmaweldingprocess26
Guida Prodotti Inglese.indd 28 27-02-2008 12:56:23
Product Range
Sabiana s.p.a. • via Piave, 53 • 20011 Corbetta • Milano • Italy • phone +39.02.97203.1 r.a. / +39.02.97270429 / +39.02.97270576fax +39.02.9777282 / +39.02.9772820 • www.sabiana.it • [email protected]
ISO 9001 - Cert. n° 0545/3Unit heaters
Radiant panelsFan coils
Air handling unitsFlues
ENVIRONMENTAL COMFORT
ENVIRONMENTAL COMFORT
GP -
E -
03/
08 C
OD. A
4000
100
E/03
/08
Copertina GUIDA Inglese.indd 1 27-02-2008 12:58:06